Steering Rack Side Nut Wrench for Opel models
Product code: MS00006
Brand: MSG
Product description
This Wrench for Steering Rack Side Tightening Locknut is an essential tool for those who performing steering system repairs. Manufactured by MSG Equipment, the wrench is engineered to simplify the installation and removal process of side tightening locknuts on steering racks. Its design prioritizes safety and precision, preventing damage to the nut during operation. The tool is compatible with popular Opel models, including Combo, Corsa B, Tigra, and Vectra B, making it a valuable addition to any repair toolkit.
Key features
- Enables fast assembly and disassembly of steering rack side tightening locknuts.
- Designed to prevent damage to the nut during use.
- Durable and precise tool from MSG Equipment.
- Compatible with the following car models:
- Combo (71_): 1994–2001
- Corsa B (73_, 78_, 79_): 1998–2000
- Corsa B Van (73_): 1999–2000
- Tigra (95_): 1997–2000
- Vectra B (36_): 2000–2002
- Vectra B Liftback (38_): 2000–2003
- Vectra B Estate (31_): 2000–2003
Product packing
| Pack number | Dimensions | Weight |
|---|---|---|
| 1 | 0 x 0 x 0 cm | 0.13 kg |
Delivery fee
| Delivery method | Gross price |
|---|---|
| Pickup in Nagytarcsa | 0,00 € |
| Pickup in Debrecen | 0,00 € |
| DHL Worldwide Express | 61,67 € |
More products in this category
Mechanism for testing hps racks under load
The MS521 mechanism simulates load resistance on HPS/EPS racks, allowing precise fault detection, including leaking valves, worn seals, and cylinder wear. Works with MS502M test bench and MS561 controller.
Product code: MS521
Rear axle bushing press for Toyota Yaris, Passo, Echo
The Rear Axle Bushing Press is designed to facilitate the installation or replacement of rear axle bushings in Toyota Yaris, Passo, and Echo models. Rear axle bushing press for Toyota Yaris, Passo, Echo. Bushing
Product code: W0720
Ball joint service set
This Ball Joint Service Set is an essential toolkit for automotive professionals focusing on the removal and installation of press-fit parts. Designed for versatility and efficiency, this set is perfect for working with ball joints, universal joints, and truck brake anchor pins.
Product code: MG99028
Multi-function pneumatic hammer set, 24pcs
The 24-piece multifunction pneumatic hammer set includes an efficient air hammer with a one-button start, non-slip handle, and quick-change chisels. It's perfect for car repairs, dismantling, and more, with various accessories included.
Product code: MG99090
Front bearing hub extractor for VW Lupo, Audi A2 1.2 TDI
This Front Bearing Hub Extractor is a specialized automotive tool designed to facilitate the installation and removal of the front bearing hub on specific vehicle models, particularly the VW Lupo and Audi A2 with 1.2 TDI engines. This tool is engineered to make the process more efficient and to minimize the risk of damage to critical components such as the ABS sensor.
Product code: W0740
Press the king pins the upper and lower Jeep - Cherokee, Grand Cherokee, Wrangler
The tool is used to remove and install the kingpins in the steering knuckle assembly. Use the king pin press tool to press out the king pin from the steering knuckle. The tool will apply force to push the pin out of its housing. Once the king pin is pressed out, you can inspect it for wear or damage and replace it if necessary.
Product code: W0401
Lower kingpin puller for Jeep Cherokee, Grand Cherokee, Wrangler
This lower kingpin puller is designed for the knuckle pin assembly and disassembly, specifically for use on the car's bottom. It ensures efficient and safe operations for Jeep models.
Product code: W0399
Adapters to bolts down Jeep - Cherokee, Grand Cherokee, Wrangler
Product code: W0398
Rear bearing hub puller, Citroen; Peugeot ; Toyota ; Opel after 2016
This tool is designed for the removal and installation of wheel bearings, especially on specific vehicles models after 2016. The design eliminates the need to remove the steering knuckle and ABS sensor and simplifies the repair process.
Product code: W0736
Front sled bushing puller Renault Laguna II, Trafic II
This is a tool used to remove the bushings in the front suspension of Renault Laguna II and Renault Trafic II cars.
Product code: W0368
Inner tie rod master tool kit with 12 adaptors
Inner tie rod master tool kit with 12 adaptors. Long socket and crowfoot design for easy removal and installation without removing the rack. Includes crowsfeet sizes from 29mm to 42mm and 1-3/16" to 1-1/2".
Product code: MG91049
Tool for hub removal (set of 15 screws)
Tool for hub removal – cars of A, B, C class and others. Set of 15 screws.
Product code: W0072
Universal sliding hammer hub puller, with 15 screws
Universal sliding hammer hub puller with 15 screws, ideal for removing seized hubs. The tool weighs 13kg and comes with three types of 5 screws for various applications. Size range: 90mm-155mm (±5mm), with an external flange dimension of 185mm.
Product code: W0002
Puller arm forward bushing Renault Laguna I (under a hydraulic press)
Puller arm forward bushing Renault Laguna I (under a hydraulic press) (nr. oe 77 00 822 503)
Product code: W0170
Double-row bearing puller and wheel hubs II version (BMW, Mercedes etc.)
Double-row bearing puller and wheel hubs II version (BMW, Mercedes etc.)
Product code: W0205
Rear beam bushing puller for BMW X5 E53
Rear beam bushing puller (No. oe 33 17 6 770 456) for BMW X5 E53
Product code: W0246
Front control arm bushing puller Renault Clio II; Renault kangoo I; Thalia I (7700424399 )
Front control arm bushing puller for Renault Clio II, Kangoo I, and Thalia I. Suitable for mounting and dismounting both bushings in the swingarm.
Product code: W0337
Puller sleeves for the left front beam Ford Focus II; III; C-Max; Volvo
Puller sleeves for the left front beam in Ford Focus II, III, C-Max, and Volvo S40 II, V50. For mounting and removing bushings directly on the car. Compatible with OE bushings: FM-FOC4, 1695011, 1355621, 23032, 30666042.
Product code: W0369
Puller sleeves for the right front beam Ford Focus II; III; C-Max; Volvo S40II, V50
Puller Sleeves for Right Front Beam – Ford Focus, C-Max, and Volvo. These puller sleeves are designed for mounting and dismounting bushings on various models of Ford and Volvo vehicles, ensuring precise and efficient maintenance. Compatible with several Ford Focus and Volvo models from 2003 onwards.
Product code: W0370
Rear axle nuts wrench for Mercedes Sprinter W901 and W905
Key for unscrewing rear axle nuts on Mercedes Sprinter W901 and W905 models. Compatible with nut 902 357 01 26.
Product code: W0598
Steering readout scale, 270-350mm
This Steering wheel level is a specialized tool designed to assist in the accurate leveling of a vehicle's steering wheel before it is locked into position. This step is crucial prior to checking or adjusting the front wheel alignment.
Product code: MG99230
Axial joint tool, 27-42mm
Axial joint tool, 27-42mm can be used to remove and attach the axial joints.
Product code: MG50444
Axial joint tool, 33-42mm
High-quality axle joint installation tool, specially designed for quick and efficient removal and installation of vehicle axle joints. Thanks to its 1/2" drive, the tool is easy to use with many manual and pneumatic wrench systems.
Product code: MG50443
Wheel Bearing tool VW
Bearing installation and removal tool for 85mm bearings. Application Volkswagen Touareg, Transporter, Multivan & T5
Product code: MG50432A
Steering rack knuckle tool set, 30-45mm
This steering rack knuckle tool set makes removing and installing steering knuckles fast and easy. With interchangeable heads to fit racks with hex drive, two flats, and round ends from 30-45mm, it's versatile and effective. Drive: 32mm Hex, 1/2" square.
Product code: MG50423
CV Boot Clamp Pliers, 184mm
CV Boot Clamp Pliers, 184mm 1/2" holes on the handles can be used as keys.
Product code: MG50110
Universal silent block removing and installing kit, 34-84mm
Spindle: M10xP1.5, M12xP1.75, M14xP2.0, M16xP2.0, length/Ø A 44/34, 46/36, 54/44, 56/46, 58/48, 66/56, 68/58, 70/60, 78/68, 80/70, 84/72, B 48/38, 50/40, 52/42, 60/50, 62/52, 64/54, 72/62, 74/64, 76/66mm
Product code: MG50093
Ball joint separator 39mm
Steering rods, stabilizers, etc. designed to remove ball-jointed rotating parts.
Product code: MG04B3022D
Ball joint separator 18mm
Steering rods, stabilizers, etc. designed to remove ball-jointed rotating parts.
Product code: MG04B3022A
Ball joint separator 19-22mm
Steering rods, stabilizers, etc. designed to remove ball-jointed rotating parts.
Product code: MG04B3022
Pneumatic CV joint boot install tool
This pneumatic CV joint boot install tool makes installation fast and easy. It prevents boot damage and ensures a tight fit. Simply adjust the air control switch and place over the CV joint. Lubricate before use. Working pressure: 5-9bar. Perfect for auto mechanics!
Product code: MG04B1085
Cv boot clamp tool with cutter
Cv boot clamp tool with cutter is suitable for installing and tightening tape-type clamps. It has a built-in cutter for cutting tape. With the built-in cutting and winding mechanism, the tape can be pulled and cut quickly and efficiently.
Product code: MG04B1008
Front control arm bush puller Renault Laguna, Espace, Trafic, Opel Vivaro
Front control arm bush puller for Renault Laguna, Espace, Trafic, and Opel Vivaro. Compatible with OE bushings No. 82 00 002 869. Ideal for bushing removal and installation.
Product code: W0326
Puller for wheel hub / bearing Ford Focus II, C-Max, Volvo, Mazda 3,-puller with ABS and without ABS
This tool is designed for the assembly and disassembly of wheel hubs and bearings on the car, compatible with both ABS and non-ABS systems.
Product code: W0305
Rear beam bushing puller for Renault Laguna II (for non-factory bushings with flat back)
This rear beam bushing puller is designed specifically for Renault Laguna II, making the removal of non-factory bushings with a flat back efficient and safe.
Product code: W0329
Front control arm bush puller Renault Laguna II; Espace IV ( nr oe 8200002868; FE22821 )
This tool is used for mounting and dismounting the bushing.
Product code: W0334
Puller for wheel hub / bearing with and without Abs - Ford Mondeo, Focus, C-Max, Mazda 3, Volvo C30 C70 S40 V50
The wheel hub/bearing puller allows you to install and remove the hub/bearing on the car without removing the ABS sensor.
Product code: W0359
Front Sledge Bush Puller for MERCEDES ML W163
The front sledge bush puller is specifically designed for Mercedes ML W163 models, suitable for the removal and installation of front suspension bushings. This tool allows for efficient work directly on the vehicle, simplifying and speeding up the maintenance process.
Product code: W0428
Rear axle silent puller
The rear axle silent puller is a special tool used to remove and install the metal-rubber bushings in the rear suspension of vehicles on various Honda and Rover models (Honda Civic, CR-V, Concerto, CRX, Rover 200).
Product code: W0485
Hub and Bearing Puller for Fiat Ducato and Citroen Jumper
This hub and bearing puller is specifically designed for Fiat Ducato and Citroen Jumper vehicles, allowing for the quick and efficient mounting and dismounting of hubs and bearings on the vehicle without the need to disassemble the suspension.
Product code: W0499
Mercedes Smart Hub Pressing Adapter Set
Hub pressing adapter set for Mercedes Smart vehicles, designed for precise and efficient hub installation and removal.
Product code: W0575
Wheel hub nut wrench rear Toyota Land Cruiser ( 09509-25011 )
Rear wheel hub nut wrench for Toyota Land Cruiser, designed for secure and precise removal and installation. Compatible with OE Tools 09509-25011 and OE Nuts 42427-60021.
Product code: W0612
Power steering pump pulley service kit, 7pcs
7-piece power steering pump pulley service kit for removing and installing pulleys with 1-1/8", 1-1/4", 1-5/16", and 1-3/8" hubs. Compatible with Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles.
Product code: MG94042
5pcs strut nut tool set for Audi, VW and Mercedes
A set of nut tools for tightening and loosening shock absorber mounts.
Product code: G02785
Steering rack bushing tool for Honda models
Specialized tool for safely mounting and dismounting steering rack bushings, preserving aluminum alloy nuts. Compatible with Honda Accord VIII sedans and wagons. Work with this device is carried out with a wrench.
Product code: MS00023
Steering gear lock nut removal tool for Hyundai, Mitsubishi and Nissan models
A specialized tool designed to safely remove the steering gear lock nut in select Hyundai, Mitsubishi, and Nissan models, preventing damage during disassembly.
Product code: MS00047
Fitting for testing power steering pump on a test bench for Audi, BMW, Mercedes, Opel and VW models
A fitting for connecting power steering pumps to a test bench for diagnostics, compatible with a wide range of Audi, BMW, Mercedes-Benz, Opel, and VW models.
Product code: MS00063
Universal silent block hydraulic extractor and installer set
Comprehensive silent block extractor and installer set with hydraulic capability, 44 mandrels (short and deep), power screws, and a hydraulic cylinder for universal automotive applications.
Product code: MG92611A
Tester for diagnostics of electric power steering units
The MS561 PRO is a professional diagnostic tester for standalone Electric Power Steering (EPS) units, supporting CAN, CAN-FD, and FlexRay protocols. It enables in-depth diagnostics, VIN programming, and error clearing for nearly 4000 car models.
Product code: MS561 PRO
Special wrench for disassembling of power steering pump
Special wrench for safe disassembly of power steering pump covers with complex shapes. Prevents damage, works with 22 mm wrenches, compatible with Nissan and Renault models.
Product code: MS00041
Tester for diagnostics of power steering system
The MS511 tester is designed for diagnosing power steering system components such as steering racks and pumps without removal from the vehicle. It evaluates fluid pressure and flow rate, helping determine if repairs are needed.
Product code: MS511
Tester for diagnostics of power steering system
The MS510 tester is used for diagnosing the hydraulic power steering system by determining the pressure generated by the vehicle's power steering pump in different operating modes (with load and without).
Product code: MS510
Test bench for diagnostics of power steering pumps
Test Bench MS504 is used for evaluation of the technical condition and output characteristics of mechanically driven single- and double-circuit pumps. The bench simulates operation of the tested unit in a car.
Product code: MS504
Test bench for diagnostics and flushing of power steering system
MS503N is a universal test bench for power steering systems operated from 230V mains. The test bench for system flushing and evaluation of the technical condition of a power steering rack or pump.
Product code: MS503N
Test bench for diagnostics of power steering racks
The MS502M test bench is designed for hydraulic power steering (HPS) rack diagnostics, allowing real-time performance simulation and detection of faults like leaks, packing seal wear, unit body damage, and Teflon ring deterioration.
Product code: MS502M
Steering rack shaft polishing machine
The MS402 polishing machine is designed for grinding and polishing steering rack shafts and other cylindrical components. It removes corrosion and ensures precise surface roughness. Works with 900mm max shaft length and operates at 1500 RPM.
Product code: MS402
Devices for refueling shock absorbers
A specialized system for refilling mono-tube and twin-tube shock absorbers with gas after repair, with pressure adjustment up to 120 bar.
Product code: MS200
Steering Rack Side Nut Wrench for Opel models
This specialized wrench is designed for quick and efficient installation or removal of steering rack side tightening locknuts. It ensures safe operation by eliminating the risk of damaging the locknut during use. Manufactured by MSG Equipment, the tool is compatible with various Opel models.
Product code: MS00006
Steering Rack Side Nut Wrench for Lexus and Toyota models
Specialized nut socket for easy installation, removal, and adjustment of steering rack side tightening nuts, ensuring damage-free and precise repairs. Compatible with select Toyota models. Manufactured by MSG Equipment.
Product code: MS00007
Steering Rack Side Nut Wrench for Citroen and Peugeot models
Specialized nut socket for easy installation, removal, and adjustment of steering rack side tightening nuts, ensuring damage-free and precise repairs. Compatible with select Citroen and Peugeot models. Manufactured by MSG Equipment.
Product code: MS00008
Wrench for bottom nut of worm gear steering rack for numerous models
This specialized nut socket is designed for the precise installation and removal of the bottom nut of the steering rack worm gear. It ensures safe, damage-free handling and high-quality repairs for steering rack pinions. It is suitable for the following models: Chrysler, Citroën, Ford, Hyundai, Kia, Mazda, Mitsubishi, Peugeot, Seat, Volkswagen (VW).
Product code: MS00009
Steering Rack Side Nut Wrench for Dodge, Mercedes-Benz, VW
This specialized nut socket is designed for efficient mounting, dismounting, and adjustment of steering rack side tightening nuts. Manufactured by MSG Equipment, it ensures safe and damage-free handling during steering system maintenance and repair.
Product code: MS00010
Steering Rack Side Nut Wrench for Ford, Nissan, Renault, Volvo, Lincoln models
Special tool for safe mounting, dismounting, and adjusting aluminum alloy steering rack nuts, preventing damage. Works with a wrench for precise handling.
Product code: MS00011
Wrench for upper nut of worm gear steering rack for Nissan models
Specialized nut socket for efficient and safe installation/removal of the upper nut of the worm gear in steering racks, compatible with select Nissan models (Murano Z50, Teana J31, 2003-2008).
Product code: MS00018
Wrench for upper nut of worm gear steering rack for Infiniti and Nissan models
Specialized nut socket for efficient and safe installation/removal of the upper nut of the worm gear in steering racks, compatible with select Infiniti and Nissan models.
Product code: MS00019
Wrench for upper nut of worm gear steering rack for Lexus, Toyota and VW models
Specialized nut socket for efficient and safe installation/removal of the upper nut of the worm gear in steering racks, compatible with select Lexus, Toyota and VW models.
Product code: MS00020
Steering rack bushing tool for Ford and Mazda models
Specialized tool for safely mounting and dismounting steering rack bushings, preserving aluminum alloy nuts. Compatible with Ford Fiesta V, Ford Fiesta Van, Ford Fusion and Mazda 2.
Product code: MS00024
Steering rack bushing tool for Lexus GX and Toyota models
Specialized tool for safely mounting and dismounting steering rack bushings. This tool eliminates the risk to damage bushing in the process of its assembling and disassembing. Compatible with Lexus GX (2001-2009) and Toyota models.
Product code: MS00028
Steering rack adjusting tool for side nuts for Lexus, Mazda and Toyota models
Effortlessly mount, dismount, and adjust side tightening nuts of steering racks without deformation. Compatible with various Lexus, Mazda, and Toyota models.
Product code: MS00029
Wrench for upper nut of worm gear steering rack for Nissan Navara, Pathfinder models
Specialized tool for quick and safe installation/removal of the upper nut of the worm gear in steering racks. Designed for Nissan Navara (D40) and Pathfinder (R51), ensuring quality repair.
Product code: MS00033
Steering Rack Side Nut Wrench for MITSUBISHI LANCER IX
Specialized tool for easy installation, removal, and adjustment of the steering rack side tightening nut. Designed for Mitsubishi Lancer IX models, ensuring damage-free maintenance.
Product code: MS00035
Steering Rack Side Nut Wrench for Ford USA Probe, Mazda 626 III, IV and Xedos 6 models
Specialized tool for the installation, removal, and adjustment of the steering rack side tightening nut. Designed for Ford Probe II and Mazda 626 III, IV and Xedos 6 models, ensuring precise and damage-free maintenance.
Product code: MS00036
Steering rack bushing tool for Ford and Nissan models
Specialized tool for quick installation and removal of steering rack bearing bushings. Manufactured by MSG Equipment, designed for Ford and Nissan models, ensuring efficient and deformation-free maintenance.
Product code: MS00039
Power steering pump hub puller
A universal power steering pump hub puller for quick and safe removal of pulley hubs without deformation. Compatible with all car models.
Product code: MS00042
Steering rack bushing tool for Ford Focus, Tourneo and Transit models
Specialized steering rack bushing tool for Ford Focus, Tourneo and Transit models, ensuring quick and damage-free installation or removal of bearing bushings.
Product code: MS00044
Pressing screw for hub and pulley of power steering pump (M12/1,5) for MS00126 tool
Universal pressing screw (M12/1.5) for press-fitting hubs and pulleys on power steering pump shafts. Compatible with all vehicle makes and models.
Product code: MS00046
Pressing screw for hub and pulley of power steering pump (BSW 3/8") for MS00125 tool
A special tool for press-fitting a hub or a pulley on the power steering pump shaft. The tool is universal and applicable to all vehicle makes and models. The purpose of the tool is to assist in the pump assembly after its repair.
Product code: MS00055
Pressing screw for hub and pulley of power steering pump (М8×1,25) for MS00125 tool
A special tool for press-fitting a hub or a pulley on the power steering pump shaft. The tool is universal and applicable to all vehicle makes and models. The purpose of the tool is to assist in the pump assembly after its repair.
Product code: MS00056
Pressing screw for hub and pulley of power steering pump (BSW 3/8") for MS00126 tool
A special tool for press-fitting a hub or a pulley on the power steering pump shaft. The tool is universal and applicable to all vehicle makes and models. The purpose of the tool is to assist in the pump assembly after its repair.
Product code: MS00057
Set of fittings for connection of steering rack to a test bench for BMW 7, BMW X3 models
A set of fittings for securely connecting steering racks to a test bench, compatible with BMW 7 (E65, E66) 2005–2008 and BMW X3 (E83) 2008–2011.
Product code: MS00060
Set of fittings for connection of steering rack to a test bench for Audi A4, A5, A8, Q5 models
A set of fittings for securely connecting steering racks to a test bench, designed for diagnostics of steering rack technical conditions, compatible with specified Audi models.
Product code: MS00061
Puller for wheel hub / bearing VW Polo, Seat, Skoda, Audi A2-puller with ABS and without ABS
This puller is specifically designed to handle wheel hubs and bearings on VW Polo, Seat, Skoda, and Audi A2 vehicles. Whether your vehicle is equipped with ABS or without ABS, this versatile tool ensures a secure grip and effortless removal.
Product code: W0306
Wheel hub nut socket wrench for Renault
Wheel hub nut socket wrench for Renault Mascott, Midlum, Premium (nut OEM 5010372353).
Product code: W0309
Key to loosening the rear hub nuts M55X1,5 Mercedes Sprinter, VW Crafter after 2006 (hardened)
Key to loosening the rear hub nuts is designed to fit the specific dimensions of the hub nut and provide the necessary grip and torque for loosening it.
Product code: W0403
Heavy-duty spring compressor 2.3t
Macpherson spring compression tool. Adjustable 100-265mm. Fits most car models. Drive: 24mm hex.
Product code: MG04B2116
Axle nut socket set, 9pcs
Axle nut socket set, 9pcs is a special set of tools required for tightening and loosening vehicle axle nuts. These types of nuts are usually large and overtightened and require special wrenches to fit their size and shape.
Product code: MG04B1015
KM10 socket wrench for unscrewing the wheel hub nut of the Mercedes G class
The socket wrench is specifically designed for the precise and safe removal and installation of the wheel hub nuts of Mercedes G class cars. With its dimensions and design, the socket wrench ensures an optimal fit with the wheel hub nuts, allowing them to be handled quickly, easily and without damage.
Product code: W0504
Rear Suspension Bush Puller Ford Mondeo
Rear beam bushing puller for Ford Mondeo, designed to press in and remove bushings without disassembling the swingarm.
Product code: W0020
Universal silent block remover/installer set, 34-72mm, 44-82mm
Our universal silent block remover/installer set makes extracting and installing silent blocks, hydraulic bearings, and more a breeze! With spindles and press adapters in various sizes, this set is perfect for any job.
Product code: MG50605
Universal press for extracting and pressing pins and silents
Its main purpose is the disassembly and assembly of silents in the suspension. Adapters not included.
Product code: C02/0135
Puller sleeve (only for pressing) of the rear beam Citroen, Peugeot
Puller sleeve (only for pressing) of the rear beam Citroen C4, Peugeot 307.
Product code: W0186
Puller for rear steering knuckle bushing for KIA and Hyundai
Rear steering knuckle silent puller for KIA, Hyundai.
Product code: W0667
Press for disassembly and assembly, bolts Ford Transit VI MK6
This press tool is a special tool used to disassemble and reassemble the kingpin of a Ford Transit VI (MK6) type vehicle.
Product code: W0681
Ball joint and silent block remover/installer set
Suitable for any passenger car, utility trucks and SUV vehicles, in which the ball joints have an interference fit. The tools allow for easy removal and installing without large-scale demounting.
Product code: MG50042
CV joint boot clamp pliers
CV joint boot clamp pliers. Holes of 1/2" on the handles to use as keys. Opening: 0-20mm.
Product code: JBM52619
Clamp 15-45mm
This tool is designed to hold, clamp or encircle one or more objects, e.g., cables or pipes.
Product code: JBM11891
Clamp 50-125mm
This tool is designed to hold, clamp or encircle one or more objects, e.g., cables or pipes.
Product code: JBM11890
Universal FlexRay Cable
The MS39000 Universal FlexRay Cable enables diagnostics of FlexRay-controlled EPS units removed from a vehicle. It works with the MS561 PRO tester, providing error reading, real-time data viewing, and control unit analysis with a single cable.
Product code: MS39000
Adapter set for bushings of swingarm pins for VW T4, LT, Crafter, Mercedes Sprinter
Adapter set for bushings of swingarm pins for VW T4, LT, Crafter, Mercedes Sprinter
Product code: C02/0146
Silent remover and installer press with adapters for Movano, Master, Nissan
Press with bushing sleeves for the top link of the swingarm of Opel Movano, Renault Master, Nissan Interstar. Universal press for extruding and pressing pins, metal-rubber sleeves, ball pins and many elements that are within the dimensions of the press.
Product code: C02/0145
Hydraulic cylinder press for silents 12T
Press for extruding bolts and ball joints with a 12 ton press capacity.
Product code: C02/0136
Rear suspension bushing tool Renault Laguna II
Rear suspension bushing tool Renault Laguna II
Product code: W0047
Power steering pump puller
This tool facilitates the safe removal of the power steering pump.
Product code: W0430
Rear control arm bushing puller Ford, Volvo
Rear control arm bushing press and puller for Ford and Volvo. Puller and press tool for rear trailing arm bushes. The tool is used to assemble and disassemble bushings without the need to dismantle the swing arm. Threads should be lubricated with grease before use.
Product code: W0671
Puller for suspension arm bushings, Cinquecento, Seicento
Puller for suspension arm silent blocks, Cinquecento, Seicento
Product code: W0004
Puller for plastic sleeves, Skoda Fabia, VW Polo
Puller for plastic sleeves, Skoda Fabia, VW Polo.
Product code: W0005
Sleeve puller, Golf IV, Audi A3, Skoda Octavia
Sleeve puller, Golf IV, Audi A3, Skoda Octavia
Product code: W0006
Puller for double-row wheel hub bearings
Puller for double-row wheel hub bearings. Mechanical kit to facilitate work with double-row front and rear axle bearings. The purpose of the puller is to safely remove this type of bearing from the wheel hub.
Product code: W0037
Adapters for press, puller for bolts, Renault Master, Opel Movano
Adapters for press, puller for bolts, Renault Master, Opel Movano. It cooperate with W0027 and W0045 presses.
Product code: W0046
Front arm bushing puller BMW E39
The Front Arm Bushing Puller BMW E39 is a tool designed to remove the front arm bushing from the BMW E39 model.
Product code: W0057
Bushing puller for BMW E36, Z3, E46 rear suspension arms
Bushing puller for BMW E36, Z3, E46 rear suspension arms.
Product code: W0083
Puller for suspension arm sleeves – front, BMW E 39 M5
This suspension arm sleeves puller is specially designed for BMW E39 535i ;540i M5 ; BMW 7 E38 models. The tool helps technicians to remove the suspension bushing easily and safely without damaging surrounding parts or the bushing.
Product code: W0086
Sleeve puller, rear beams, BMW E39 sedan
The sleeve puller is used to remove and install the rear axle bushing.
Product code: W0096
Adapters for press, puller for bolts, Master, Movano, Interstar
Adapters for press, puller for bolts, Renault Master, Opel Movano, Nissan Interstar
Product code: W0098
Universal press for bolts and sleeves
Universal, strengthened press for bolts and sleeves of trailing arms.
Product code: W0099
Press, puller for bolts of suspension arms Opel, Renault, Nissan
Press, puller for upper and lower ball bolts of the suspension arms in Master, Movano, Interstar.
Product code: W0100
Puller screw, M12, 250mm
Screw for bushing and sleeve pullers, M12, 250mm.
Product code: W0101
Sleeve puller, rear beams FIAT Panda 2003-
Suitable for disassembling and assembling the bushings on the car for FIAT Panda models after 2003.
Product code: W0107
Puller for rear beam sleeve, BMW E39 touring
The tool precisely fits the rear suspension bushings of the BMW E39 Touring and can be used to easily remove and install the bushings without damaging the components.
Product code: W0113
Puller for rear beam sleeve, Ford Fiesta, Ka
Puller for rear beam sleeve is a specialized tool designed for Ford Fiesta and Ka models. This puller is an essential accessory for removing the rear beam sleeve, facilitating efficient and precise maintenance or replacement procedures.
Product code: W0114
Press for dismantling and mounting of lower bolts, IVECO
Press for dismantling and mounting of lower bolts, IVECO
Product code: W0115
Set of adapters for dismantling and mounting of lower bolts, IVECO
The adapter kit is precisely engineered and durable, and allows reliable and efficient removal and installation of lower suspension bolts. Designed to IVECO vehicle specifications to fit perfectly with the lower suspension bolts and allow smooth and safe operations.
Product code: W0116
Puller to the hub / bearings VW T5
Puller to the hub / bearings VW T5
Product code: W0129
Press, puller for bolts (W0027, W0102, W0116), Mercedes, VW, Opel etc.
Press, puller for bolts (W0027, W0102, W0116), Mercedes, VW, Opel etc.
Product code: W0133
Sleeve puller for control arm rear axles for Fiat, Opel, Saab
Sleeve puller for control arm rear axles for Fiat, Opel, Saab
Product code: W0142
Wheel hub socket wrench Mercedes, inner diam.: 55mm
Wheel hub socket wrench Mercedes, inner diam.: 55mm.
Product code: W0146
Sleeve puller, rear beams Mercedes Benz S Class W / V 220 and C215 CL
The bushing puller is used to remove and install the rear axle bushing.
Product code: W0157
Press, puller for bolts Renault Master / Opel Movano
Press, puller for bolts Renault Master / Opel Movano + W0160 adapter
Product code: W0161
Press and puller for ball joints Renault, Opel, Iveco, VW, Nissan, Mercedes etc., 20 adapters
Universal press and puller for ball joints Renault, Opel, Iveco, VW, Nissan, Mercedes etc., with 20 adapters. For models manufactured in 2006 and on.
Product code: W0162
Hub Puller VW, Seat, Skoda-Puller with ABS and without ABS
The tool is suitable for removing the wheel hubs of both vehicles with and without ABS. Therefore, it can be widely used when servicing VW, Seat and Skoda models. The tool fits exactly on the hub and provides the right grip to pull the hub off efficiently and safely.
Product code: W0163
Upper control arm central bolt puller for VW, Audi after 2005
Upper control arm central bolt puller for VW, Audi after 2005.
Product code: W0164
Universal puller small metal-rubber sleeve
Universal puller small metal-rubber sleeve. It is a perfect and ideal tool for effective and safe bushing removal.
Product code: W0167
Steering rod wrench
Allows the inner tie rod to be removed and installed without removing the rack.
Product code: W0168
Puller arm forward bushing Renault Laguna I
Puller arm forward bushing Renault Laguna I (nr. oe 77 00 824 042)
Product code: W0171
Sleeve puller, Golf IV, Audi A3, Skoda Octavia for the sleeve FEBI
Sleeve Puller designed specifically for Golf IV, Audi A3, and Skoda Octavia vehicles, compatible with FEBI sleeves. Ensures a precise and secure grip for effective removal.
Product code: W0172
Control arm bushing puller lower front Opel Astra G, H, Zafira, Vectra B
The control arm bushing puller for the lower front of Opel Astra G, Astra H, Zafira, and Vectra B is a specialized tool used to remove the control arm bushings in the front suspension of these vehicles.
Product code: W0190
Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot
Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot
Product code: W0195
Bushing puller, Citroen C5
Silent puller, Citroen C5 (sleeve OE no. 352384)
Product code: W0196
Puller arm bushings front / rear, SEAT Leon, Toledo II, Skoda Octavia, VW Bora, Golf IV
The bushing puller is a tool for removing front and rear wheel hub bushings for SEAT Leon, Toledo II, Skoda Octavia and VW Bora, Golf IV models.
Product code: W0231
Puller arm bushings rear axle Ford Galaxy, Seat Alhambra, VW Sharan
Puller arm bushings rear axle Ford Galaxy, Seat Alhambra, VW Sharan (oe VW 7M0 407 181 A)
Product code: W0233
Rear transverse upper control arm bushing puller (crescent / banana)
This tool allows for the mounting and dismounting of bushings on a car or with a hydraulic press.
Product code: W0254
Socket wrench for M52x1.5 Mercedes Vario rear hub nuts
Our Socket Wrench for M52x1.5 Mercedes Vario rear hub nuts is the perfect tool for unscrewing wheel hub nuts on the rear axle of your Mercedes Vario (1996-2013). With an OE code of 6743560126, this wrench offers precise and efficient performance. Get yours today!
Product code: W0338
Adapters for mounting and dismounting the front control arm bolts for Renault, Dacia
These adapters work with our universal press tool (W0099 - Universal press for bolts and sleeves). Adapters for mounting and dismounting the front control arm bolts.
Product code: W0353
Front hub nut wrench for Iveco Daily (2004-2019)
Front hub nut wrench for Iveco Daily (2004-2019).
Product code: W0354
Rear beam sleeve puller Opel Zafira A; Astra G ; Combo ; Meriva A (oe number 402644)
This rear beam sleeve puller is designed to assist installing and removing bushings directly on the vehicle. Built to be compatible with various Opel models, it provides a tight fit and smooth operation, eliminating potential damage to the bushing or vehicle.
Product code: W0371
Rear control arm bushing puller for BMW
Rear control arm bushing puller for BMW E60, E61, E63, E64, E65, E53.
Product code: W0376
Puller sleeve rear beam Renault Megane II; Scenic II; Grand Scenic II (oe sleeve 7701479190)
The Puller sleeve rear beam is a specialized tool to assist in the assembly and disassembly of rear beam bushings. This puller is specially designed for Renault Megane II, Scenic II and Grand Scenic II models.
Product code: W0379
Puller sleeves of rear beam / bridge Mercedes W210, W202, W203, W140 (OE 129 351 21 42)
The bushing puller is used to remove and install the rear axle bushing.
Product code: W0424
Puller of bushings of the front control arm Volkswagen T4
The puller is used to install and remove control arm bushings on the car.
Product code: W0427
Rear beam bushing puller for Mercedes S-Class (W220) CL-Class (C215)
The rear beam bushing puller is a specialized tool designed to remove the rear beam bushings from Mercedes-Benz S-Class (W220) and CL-Class (C215) vehicles. The rear beam bushings are essential components of the rear suspension system, and they help provide stability and control to the rear axle assembly.
Product code: W0453
Ball joint socket wrench for Renault Master III, Opel Movano B
Ball joint socket wrench for Renault Master III, Opel Movano B.
Product code: W0469
Puller sleeve rear beam Front Bmw Series 5,6,7 / F 10, F11, F12, 13, F01 (33316790573, 33 31 6 775 780)
This tool is a great help in installing and removing the bushing. Puller sleeve rear beam is a high quality tool specially designed for Bmw Series 5,6,7 / F 10, F11, F12, 13, F01 models. This tool fits the vehicle perfectly and guarantees perfect operation and durability.
Product code: W0488
Rear beam sleeve puller, Bmw Series 5,6,7 / F 10, F11, F12, 13, F01 (33 31 6775792, 33 31 6 793 864)
This puller helps you safely and efficiently remove the bushings that attach to the rear axle. The purpose of the tool is accurate and powerful removal, minimizing the risk of injury and facilitating service work.
Product code: W0490
Puller hub bearing the brake disc Ford Transit
The puller hub bearing the brake disc is a special tool used for mounting and dismounting brake disc bearings on Ford Transit vehicles.
Product code: W0500
Puller sleeve the arm forward (lower) L / R BMW X5 (E70) X6 (E71, E72), 3.0-4.8 (oe sleeve 31106778015)
The tool is used to remove and install the bushing sleeve without the need to disassemble the entire suspension system or remove the swing arm from the vehicle. It helps save time and effort during maintenance or repair procedures related to the front lower swing arm bushings.
Product code: W0501
Puller hub / bearing Mondeo IV; Focus II RS (FORD 1 463 833)
This tool is designed for the assembly and disassembly of the front hub and bearing on Ford Mondeo IV and Focus II RS vehicles.
Product code: W0506
Puller sleeve back beam (middle) BMW 5 (E 60, E61) BMW 6 (E63, E64) (oem 33176770825)
This tool allows easy and safe removal of the center silencer from the rear beam without disassembling other components or the entire beam system.
Product code: W0520
Silent puller for VW, Audi, Seat, Skoda engines and gearboxes
Allows the replacement of engine and gearbox silent blocks in VAG engines.
Product code: W0521
Rear bushing puller for Opel Corsa B, C, Tigra
Rear silent puller for Opel Corsa B, C, Tigra. Opel OEM: 24443815, 5402636.
Product code: W0539
Wrenches for unscrewing / fixing shock absorbers (4 types )
The wrenches for unscrewing and fixing shock absorbers are specialized tools designed for specific applications. They are made of hardened and higher-grade materials to withstand the forces and torque required for working with shock absorbers. The wrenches are categorized by the size of the hexagon, and each size is suited for different car makes and models.
Product code: W0549
Bushing puller and press for Fiat, Opel rear arms
Silent puller and press for Fiat Doblo (2009 and on) rear arms.
Product code: W0658
Rocker Arm Pin puller and press for Renault Scenic II, Clio III;
It is used for the disassembly and assembly of the wishbone pin at the front bottom of the vehicle.
Product code: W0670
Press for bushings and silents for hydraulic cylinder 12T
Press for pins and bushings without adapters. Can be used with a hydraulic cylinder.
Product code: C02/0149
The wrench for the side pressing nut of the Mercedes steering rack
This tool is ideal for professionals and DIY enthusiasts alike, this tool ensures seamless installation, removal, and adjustment of the steering gear side pressure nut.
Product code: W0728
Wrench for upper nut of worm gear steering rack for Toyota models
Specialized nut socket for efficient and safe installation/removal of the upper nut of the worm gear in steering racks, compatible with select Toyota (Avensis, Echo, Prius, Vitz, Yaris) models.
Product code: MS00026
Wrench for upper nut of worm gear steering rack for Toyota Corolla 2002-2007
Specialized nut socket for efficient and safe installation/removal of the upper nut of the worm gear in steering racks. Suitable for Toyota Corolla (2002-2007).
Product code: MS00031
Wrench for bottom nut of worm gear steering rack
Durable and precise tool for mounting and dismounting the bottom nut of worm gear steering racks, ensuring the nut remains in excellent condition. Compatible with multiple car models.
Product code: MS00032
Steering Rack Side Nut Wrench for Nissan and Samsung models
Specialized tool for easy and safe installation, removal, and adjustment of the steering rack side tightening nut. Designed to prevent nut damage and ensure smooth maintenance for various Nissan models and Samsung SM5 (A32).
Product code: MS00034
Steering Rack Side Nut Wrench for Mitsubishi L200
Specialized tool for mounting, dismounting, and adjusting the steering rack side tightening nut. Designed for Mitsubishi L200 models, ensuring precise and damage-free maintenance.
Product code: MS00037
Set of fitting for testing power steering rack on the test bench
A universal set of fittings for securely connecting a steering rack to a test bench during diagnostics. Includes fittings and clamping plates to minimize mechanical damage, even in heavy-duty operations.
Product code: MS00553
Fitting for testing power steering pump on a test bench for Mercedes-Benz S-Class and SL models
A fitting for securely connecting power steering pumps to a test bench for diagnostics, compatible with Mercedes-Benz S-Class (W221), S-Class Coupe (C216), and SL (R230).
Product code: MS00062
Wheel hub puller set
Wheel hub puller set, suitable for VW, Audi, Alfa Romeo, Ford, Citroen, Bmw, Mazda, Fiat, Mercedes-Benz, Seat, Opel, Peugeot, Renault, Skoda, Porsche
Product code: MG50438A
Puller for front control arm pins of Renault Master, Opel Movano
Puller for front control arm pins of Renault Master, Opel Movano
Product code: W0045
Adapter for mounting pin BMW 3 and Z 3 (BMW E36) BMW 31126758510
The Adapter for Mounting Pin BMW 3 and Z3 is a specialized tool designed to facilitate the precise installation or pressing of pins in BMW 3 Series and Z3 models. This adapter is specifically designed to work with a hydraulic or manual press, ensuring a secure and accurate pin installation process.
Product code: W0707
Socket wrench key for Citroen and Peugeot swingarms
Socket wrench key for Citroen Berlingo, C4 and Peugeot 307, 308, 5008 swingarms.
Product code: W0362
Steering Knuckle Nut Wrench for Mercedes Actros, Axor, Antos, Arocs
This wrench is designed for unscrewing the steering knuckle nut of specific Mercedes trucks. It offers a precise fit and is compatible with both OEM and certain aftermarket parts.
Product code: W0735
Rocker Arm Nut Wrench for Iveco Daily 2006 E4
This tool is specifically tailored to unscrew the nut of the rocker arm.
