Ball joint removal set, 5pcs

Ball joint press set

For the removal of ball joints, U-joints, brake anchor pins, and more on most 2 wheel drive (2WD) and 4 wheel drive (4WD) vehicles without removing the control arm from the vehicle.

Product code: CKB04009

Ball joint separator set, 3pcs

Ball joint separator designed for removing the track rod end from the steering arm without doing damage to the taper pin. Suitable for most small cars and light vans.

Product code: DK-230503

Ball joint separator and installer tool set

This ball joint tool kit is suitable for removing and fitting press-fit type ball joints without removing the vehicle's control arm. The pressing device's gap size is 152mm.

Product code: CKB04011

Pneumatic CV boot installation tool (8bar)

The CV boot installation tool is to be used solely for the stretching of flexible CV boots onto drive-shaft assemblies of automotive vehicles.

Product code: JBM52994

Wrench for damper pin locking/unscrewing, Ducato, Jumper, Boxer

Wrench for damper pin locking/unscrewing, Ducato, Jumper, Boxer

Product code: W0090

Wishbone lever tool

Wishbone lever tool, Length: 1180mm, Tube: Ø 3.5cm, Brace distance: 50 - 45 - 40 - 35 - 30cm, Fastening support: 15 x 13cm

Product code: JBM51902

Inner tie rod remover and installer tool. For rod diameters: 28-35mm

Inner tie rod remover and installer tool. For rod diameters: 28-35mm. Length: 400mm.

Product code: G02547

Inner tie rod remover and installer tool. For rod diameters: 35-41mm

Inner tie rod remover and installer tool. For rod diameters: 28-35mm. Length: 400mm.

Product code: G02548

Universal ball joint puller for pins up to 20mm in diameter.

Universal ball joint puller with lever. Made of forged steel. Its compact size allows you to work in hard to reach areas.

Product code: G02583

3pcs Ball joint remover set. Diameters: 23, 28, 34mm

Pullers for ball joints on stabilizers and torsion bars. Suitable for cars and vans.

Product code: G02585

Ball joint seperator for pin diameters up to 19mm

Professional ball joint pin puller. It is made of durable, high-quality tool steel. It is adapted to work with pins with a diameter of not more than 19mm.

Product code: G02587

Ball joint separator tool set, replaceable heads, 20, 22, 24, 27, 30mm

Ball joint and tie rod separator tool set, capacity 20, 22, 24, 27, 30mm

Product code: MG50436

Axial joint tool, 27-42mm

Axial joint puller/installer

Product code: MG50444

Axial joint tool, 33-42mm

Axial joint puller/installer. 1/2", clamping capacity: 33-42mm

Product code: MG50443

Ball joint separator, 18mm, two-staged, max. size 50mm

Ball joint/tie rod end separator, opening 18mm, two-staged, max. size 50mm

Product code: MG50032

Wishbone lever tool, sliding type, lockable at 5 points

Wishbone lever tool, sliding type, lockable at 5 points

Product code: MG50417

Axial joint puller 28-35mm

Capacity 28-35mm, length 400mm, hex end 27mm (1/2" drive)

Product code: MG50045A

Axial joint puller 35-45mm

Capacity 35-45mm, length 400mm, hex end 27mm (1/2" drive)

Product code: MG50045

CV joint assembly removal tool

Can be used in almost all vehicles. It is suitable for replacing damaged, worn out axle hinges quickly and without any problems.

Product code: MG04B1012

Ball joint and silent block remover/installer set

Suitable for any passenger car, utility trucks and SUV vehicles, in which the ball joints have an interference fit. The tools allow for easy removal and installing without large-scale demounting.

Product code: MG50042

CV boot clamp pliers (ear type)

CV boot clamp pliers suitable for Oetiker CV drive shaft boot securing clips. Plier's plate presses a flat on the top of the clip so that it forms the spring loop correctly.

Product code: G01656

CV joint clamp banding tool

CV joint clamp banding tool is suitable for installation and tightening of band-style clamps on CV joint boots, power steering rack and pinion steering gear boots.

Product code: G01653

Ball joint removal tool set

Designed for easy removal of most popular types of pitman arms, tie rods and ball joints. Operation range: 17, 19, 21, 23, 27mm

Product code: CKB04340

Ball joint, tie rod, and pitman arm separator set (5pcs)

Ball joint, tie rod, and pitman arm separator for cars and light trucks. 5pcs set. Forks are designed to interchange with either of the handles.

Product code: CKB04028

Hollow hydraulic cylinder 20t

Hydraulic cylinder with through and threaded hole. It can be used with various types of mechanical presses that are designed for the extraction of metal and rubber silents, pins, joints, etc.

Product code: C07/0112

Hydraulic cylinder press for silents 12T

Press for extruding bolts and ball joints with a 12 ton press capacity.

Product code: C02/0136

Hollow hydraulic cylinder 12t

Hydraulic cylinder with through and threaded hole. It can be used with various types of mechanical presses that are designed for the extraction of metal and rubber silents, pins, joints, etc.

Product code: C07/0098

Universal press for extracting and pressing pins and silents

Its main purpose is the disassembly and assembly of silents in the suspension. Adapters not included.

Product code: C02/0135

Suspension support rod measuring tool

The device is designed for precise measurements of the curvature of the front suspension support pipes. Dial indicator not included.

Product code: C06/0212

Press, puller for bolts of suspension arm Master/Movano/Interstar

Press, puller for bolts of suspension arm Master/Movano/Interstar (upper and lower)

Product code: W0100

Press the king pins the upper and lower Jeep - Cherokee, Grand Cherokee, Wrangler

Product code: W0401

Adapters to bolts down Jeep - Cherokee, Grand Cherokee, Wrangler

Product code: W0398

Adapters Bolt crossover top Jeep - Cherokee, Grand Cherokee, Wrangler

Product code: W0312

Adapters for mounting and dismounting the front control arm bolts Renault Scenic II; Grand Scenic II; Megane II; Dacia Logan

Product code: W0353

Press the upper crossover pins Jeep Cherokee, Grand Cherokee, Wrangler

Product code: W0313

Press, puller for bolts of suspension arm, front Master/Movano/Interstar

Press, puller for bolts of suspension arm, front Renault Master / Opel Movano / Nissan Interstar

Product code: W0097

Press the down crossover pins Jeep Cherokee, Grand Cherokee, Wrangler

Product code: W0399

Silent puller for VW, Audi, Seat, Skoda engines and gearboxes

Allows the replacement of engine and gearbox silent blocks in VAG engines.

Product code: W0521

Steering rod wrench

Allows the inner tie rod to be removed and installed without removing the rack.

Product code: W0168

Press the front control arm bolts Renault Scenic II; Grand Scenic II; Megane II; Dacia Logan

Product code: W0352

Camber angle setting tool

Camber angle setting tool

Product code: W0183

The cap / wrench for loosening the hub nut Land Rover DEFENDER 1999-2016. ( nut number RFD100000)

Product code: W0642