Rear beam bushing puller Toyota YARIS 2005-2011

Wire Terminal Connect Tool, 2pcs

Wire Terminal Connect Tool, 2pcs is designed to remove wire connectors from terminal blocks without causing damage. Includes 12 different tool styles carefully designed to fit the most common connectors, ensuring compatibility and ease of use.

Product code: MG04D2038

Puller arm forward bushing Renault Laguna I (under a hydraulic press)

Puller arm forward bushing Renault Laguna I (under a hydraulic press) (nr. oe 77 00 822 503)

Product code: W0170

Puller arm forward bushing Renault Laguna I

Puller arm forward bushing Renault Laguna I (nr. oe 77 00 824 042)

Product code: W0171

Rear beam bushing puller BMW E32 / E34 (nr. oe 3331112670)

When working on a BMW 5 Sedan (E34), BMW 5 Touring (E34) or BMW 7 (E32), the rear suspension bushing puller makes it easy to remove the bushings from the suspension. This tool provides the proper grip and power transfer to easily and safely remove bushings from the suspension.

Product code: W0181

Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot

Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot

Product code: W0195

Oil filter wrench 80mm 14 angles. Kia/Hyundai 1.6 CRDI

This precision-engineered 80mm 14-angle oil filter wrench is an essential tool for efficient oil filter replacement on select Kia and Hyundai models. The wrench is a perfect fit for 1.6L D4FE (U3) diesel engine codes, allowing for easy filter removal and installation. Its compatibility extends to newer models of both brands.

Product code: W0738

Double flaring brake line tool kit, 13pcs

Double flaring brake line tool kit the primary tool for chip-free and parallel cutting as well as pipe flanging.

Product code: MG99066

Ball joint separator 18mm

Steering rods, stabilizers, etc. designed to remove ball-jointed rotating parts.

Product code: MG04B3022A

2-jaw and 3-jaw gear puller set

2 or 3 jaws that can be adjusted to fit various sizes of gears, pulleys, bearings, and other components.

Product code: MG04J1125

Valve spring compressor set

A kit used to remove and install a valve spring with the cylinder head still on the engine and in the car or with the cylinder head removed. High capacity valve spring compressor tool.

Product code: MG50103A

Spark/Glow plug and oxygen sensor master service set, 11pcs

Forged Chrome Vanadium master service set for the professional. Includes all the sockets and extensions required to remove/install sprak/glow plugs and oxygen sensors on most modern vehicles.

Product code: MG92585

Socket / Wrench For lock nuts, KM 18

The socket wrench is designed for safe and easy tightening and loosening of lock nuts.

Product code: W0722

Brake piston wind back tool set, 18pcs

Designed to push back or wind back brake pistons. Includes left-handed and right-handed thrust bolt assemblies.

Product code: DK-230542

Universal brake caliper wind back tool kit, 16pcs

Pneumatic rewind tool for disc brake pistons with adapters. Brand new practical and convenient kit for replacing front and rear disc brake pads.

Product code: DK-230540

Bearing puller set, 9pcs

It’s ideal for removing small gears, wheels, and fittings from shafts also can be used to replace the steering pump, perfect for wiper arm assembly, rebuilding your alternator, removing tightly fitted pulleys, and reaches places that regular gear pullers can’t access.

Product code: DK-230590

Diesel compression tester kit, with adapters, 0-70bar

A wide range of glow plug adapters and test injectors for checking the compression of diesel engines. Two-stage pressure gauge 0-70bar / 0-1000psi with quick release connection system.

Product code: MG50196

Internal bearing puller tool set, 8-58mm

This internal bearing puller tool set can handle jobs requiring clamping, with a capacity of 8-58mm. Includes 3 threaded adapters and 11 gripping sizes. Easy and efficient!

Product code: MG50148

CV Boot Clamp Pliers, 184mm

CV Boot Clamp Pliers, 184mm 1/2" holes on the handles can be used as keys.

Product code: MG50110

Valve spring compression, for overhead valve O.H.C valves

For replacing valve springs and valve stem oil seals without removing the cylinder head. This tool allows you to compress the valves and remove the valve discs without damaging the engine.

Product code: MG50109

Piston ring pliers, 40-100mm

Designed for installing and removing piston rings. The jaws are designed to protect the piston ring from damage.

Product code: MG50335A

Piston ring pliers, 80-120mm

Designed for installing and removing piston rings. The jaws are designed to protect the piston ring from damage.

Product code: MG50335B

Steering rack knuckle tool set, 30-45mm

This steering rack knuckle tool set makes removing and installing steering knuckles fast and easy. With interchangeable heads to fit racks with hex drive, two flats, and round ends from 30-45mm, it's versatile and effective. Drive: 32mm Hex, 1/2" square.

Product code: MG50423

Carburetor synchroniser and vacuum/pressure tester, 0-1bar

With this kit you can synchronize the values of up to 4 carburettors and fine tune and adjust them.

Product code: MG50504

Fuel retriever 1.5l

The Fuel Retriever with a capacity of 1.5 liters provides the opportunity to extract fuel easily and efficiently. Designed for both petrol and diesel vehicles to remove excess fuel from fuel lines prior to maintenance.

Product code: MG93694

Oil inspection syringe 350ml

The 350 ml capacity syringe can be used to take an oil sample from the car engine or other oiled systems. Ideal for the transfer of oils/fluids to and from vehide components such as gearboxes and diferentials.

Product code: MG93697

Pneumatic injector puller set, 21pcs

Pneumatic injector puller set, 21pcs is a specialized tool set designed for removing injectors from automotive engines using pneumatic power. The set includes a pneumatic puller, a black BMC (Blow Molded Case) for storage, and color stickers for organization and identification.

Product code: MG98782A

Oxygen sensor thread chasers, 2pcs

The Oxygen sensor thread chasers comes with tools that allow you to repair a damaged or damaged lambda sensor thread instead of having to replace the entire lambda sensor.

Product code: MG04A6021

Engine oil filler set, 15pcs

Engine oil filling kit 15 pcs is used for changing the car's oil, it allows you to easily and cleanly fill the engine oil into the engine, minimizing the possibility of contamination and fluid leakage.

Product code: MG04A5115

Cooling system vacuum purge and refill kit, 6pcs

A cooling system vacuum purge and refill kit is used for servicing a vehicle's cooling system. The kit helps to remove any air pockets or bubbles that may be trapped in the cooling system, which can cause the engine to overheat.

Product code: MG04A4010

Injector gasket puller

For the extraction of copper sealing gaskets and washers within injector seats.

Product code: MG04A3079

Universal injector seat cleaning set

Universal injector seat cleaning set. Nylon brushes: 15mm, 20mm. Steel wire brushes: 18mm, 22mm, 25mm.

Product code: MG04A3064

Fuel line disconnect set, 3pcs

Fuel line disconnect set is suitable for breaking into fuel lines and hoses fitted with quick release couplings.

Product code: MG04A3035

Glow plug connector pliers, angled

Glow plug connector pliers, angled are designed to remove hard-to-reach glow plug connectors.

Product code: MG04A6035

Motorcycle flywheel puller set, 10pcs

Motorcycle flywheel puller set to separate and remove the flywheel and to perform certain repair or maintenance tasks.

Product code: MG04A7005

The wrench for the side pressing nut of the Mercedes steering rack

This tool is ideal for professionals and DIY enthusiasts alike, this tool ensures seamless installation, removal, and adjustment of the steering gear side pressure nut.

Product code: W0728

Socket 6 Teeth, 107mm for Low Floor Trailers

This is an essential tool for professionals working on low floor trailers. Featuring a robust 6-teeth configuration, it ensures accurate engagement and superior grip.

Product code: W0733

Steering Knuckle Nut Wrench for Mercedes Actros, Axor, Antos, Arocs

This wrench is designed for unscrewing the steering knuckle nut of specific Mercedes trucks. It offers a precise fit and is compatible with both OEM and certain aftermarket parts.

Product code: W0735

Rear bearing hub puller, Citroen; Peugeot ; Toyota ; Opel after 2016

This tool is designed for the removal and installation of wheel bearings, especially on specific vehicles models after 2016. The design eliminates the need to remove the steering knuckle and ABS sensor and simplifies the repair process.

Product code: W0736

Jumbo plastic funnel 28cm

The jumbo plastic funnel is the perfect tool for oil and other liquids to prevent spillage and overflow during filling. Whether you're working with liquids or oils, this funnel makes pouring easy thanks to its long neck design that provides a precise and controlled flow, allowing you to pour exactly where you need it without spills or drips.

Product code: LN-PF-9102

Flexible funnel with filter, 2 in 1

The flexible neck funnel is an extremely practical tool for mechanics, which filters out unwanted particles with the help of a mesh screen and helps in precise and clean pouring of oil and other liquids. The device includes a flexible tube that allows easy access to hard-to-reach areas, making it a very convenient and efficient way to e.g. of the oil change process. The design and material of the device ensure durability and easy cleaning.

Product code: LN-PF-9105

Long neck funnel, 45cm

The 45 cm long neck funnel is the perfect tool for oil and other liquids to prevent spillage and overflow during filling. Whether you're working with liquids or oils, this funnel makes pouring easy thanks to its long neck design that provides a precise and controlled flow, allowing you to pour exactly where you need it without spills or drips.

Product code: LN-PF-9106

Double flaring brake line tool kit, 11pcs

It is suitable for making double edges of copper, aluminum, magnesium and brass pipes, as well as soft steel (max. 1mm thick) pipes. For vehicle brake pipes, cooling and heating pipes.

Product code: MG99071

Valve Lapping Tool Attachment, 6 parts

Using a Valve Lapping Tool Attachment to grind the valves.

Product code: MG04A2269A

Fuel line connector pliers

Fuel line connector pliers is suitable for releasing connections on fuel pipes during maintenance or when replacing fuel filters. It is designed to compress the quick connect lugs for easy removal without damaging the connector.

Product code: MG04A3034

3-leg oil filter wrench, two way

3-leg oil filter wrench, two-way is a tool that helps you replace or remove oil filters. The tool has 3 adjustable claws that clamp the oil filter and allow it to be easily removed or installed.

Product code: MG04A5021

Oil filter chain wrench

Oil filter chain wrench

Product code: MG04A5098

Universal Clutch Aligning Tool Kit, 10pcs

The Universal Clutch Aligning Tool Kit can be used to adjust the position of the clutch shaft during installation or after replacement.

Product code: MG04B1082

Ball joint separator 19-22mm

Steering rods, stabilizers, etc. designed to remove ball-jointed rotating parts.

Product code: MG04B3022

Ball joint separator 39mm

Steering rods, stabilizers, etc. designed to remove ball-jointed rotating parts.

Product code: MG04B3022D

Hose clamp set, 4pcs

Hose clamp set, 4pcs are light and compact steel alloy construction for ease of use where space is limited.

Product code: MG04B4018

Brake spring pliers

Brake spring clamp for drum brakes. For removing and installing drum brake springs.

Product code: MG04B4039

3-Jaw Internal & External Puller Set

Can be used for pulling automotive parts, wheel bearings, gears and more. Comfortable T handle provides secure grip while working.

Product code: MG04J1011

Glow/Spark Plug Socket Set, 6pcs, 3/8"

The tool set are specially designed to fit and securely grip the spark plugs or glow plugs during installation or removal.

Product code: MG50377

Extra-long pick and hook set, 6pcs

Suitable for removing O-ring clips or seals. Extra long pick and hook set is ideal for removing and replacing parts in hard-to-reach areas, as well as for precise handling of pipes, seals and wires.

Product code: MG92506

Flywheel locking tool for 1.3 TCe engines

Flywheel locking tool for Mercedes-Benz 1.3M, Dacia, Nissan 1.3 TCe, Dacia 0.9, 1.6 petrol engines

Product code: C01/0262

Spring compressor set

For the removal and fitting of suspension springs on all types of McPherson struts with conical and cylindrical springs on the front and rear axle. 65-125mm, 88-160mm, 125-215mm

Product code: DK-230579A

Sleeve, bearing and silent press kit, 27pcs

Inside diameters from 34-80mm in 2mm steps, outside diameters from 44-80mm in 2mm steps, pulling spindles with nuts.

Product code: DK-230581A

Fuel Tank Sender Wrench

Universal fuel tank cap wrench, which can be adjusted between 89mm-170mm, so it is a suitable choice for many types of cars. With 15mm drive.

Product code: MG04A3067

Rear axle bushing press for Toyota Yaris, Passo, Echo

The Rear Axle Bushing Press is designed to facilitate the installation or replacement of rear axle bushings in Toyota Yaris, Passo, and Echo models. Rear axle bushing press for Toyota Yaris, Passo, Echo. Bushing

Product code: W0720

Oil drainer with vacuum cleaner

This is an innovative and highly efficient product tailored for diverse applications in the automotive, heavy-duty, industrial, marine and farm sectors. This tool is designed to revolutionize the way you handle oil and fluid changes, providing a cleaner, safer, and more environmentally friendly method of draining and disposing of used oil.

Product code: LN-ODT30-E

The Universal Flaring Tool Kit Adjustable (5-16mm)

The Universal Flaring Tool Kit Adjustable (5-16mm) is designed to create conical or tapered flares on brass and aluminum pipes. It is adjustable and can accommodate a range of sizes from 5mm to 16mm (3/16" - 5/8").

Product code: MG04D1013

A/C Compressor clutch remover kit

A special kit with elements that fit into a wide variety of A/C compressors. It is easy to remove and mount the Clutch Compressor Clutch Disc.

Product code: MG04D1003

Spoon Tip Seal Removal Set, 4 pcs

The 4-Piece Spoon Tip Seal Removal Kit includes tools to easily remove seals and O-rings. It is characterized by rounded tips and blended edges.

Product code: MG04C2007

10pcs double pipe flaring tool set

The function of the 10pcs double pipe flaring tool set is to strengthen and protect the end of the brake pipe at the connection point, thus ensuring safe operation and a longer service life. It is suitable for making double edges of pipes. For vehicle brake pipes, cooling and heating pipes.

Product code: MG04B4092A

Professional tube bending tool for diameters 5, 6, 8, 10mm

Makes perfect bends in aluminum, copper and steel pipes.

Product code: MG04B4019

Hose Clamp Pliers

Especially designed for working with progressively adjustable clamps commonly found on axle boots of vehicles from Volkswagen Audi Group (VAG), Mercedes, and Toyota. The pliers provide an efficient and safe way to install or remove these clamps, making them a valuable addition to any automotive toolkit.

Product code: MG04B1065

Digital Display Timing Light

A Digital Display Timing Light is an important tool in car repair, especially for diagnosing and repairing problems related to the ignition system. A strobe light can be used to precisely adjust the mechanical or electronic glow system to match engine speed, resulting in greater fuel efficiency and improved performance.

Product code: MG04A6014

Adjustable Seal Puller

Adjustable Seal Puller is easy to use and ideal for everyone to maintain and remove seals. It is most often used to remove seals found in car engines and other machinery. The tool is thin with a pointed tip to fit easily into tight spaces and to cause as little damage as possible to surrounding components.

Product code: MG04A5061

Condenser - Fin Comb

The Condenser - Fin Comb is a practical tool that enables easy and efficient maintenance of the radiator grills. The device is suitable for cleaning refrigerators, air conditioners, car coolers or any device that has fins. Removes dust, dirt and impurities easily.

Product code: MG04A4012

Fuel Feed Pipe Pliers

The Fuel Feed Pipe Pliers are excellent for disconnecting fuel connectors for fuel filter replacement or engine repair.

Product code: MG04A3074

Exhaust Hanger Removal Pliers

Removal pliers are a special tool that allows you to easily and safely remove and reassemble the exhaust system without damaging the connections or seals. It enables easy, quick and one-handed use when removing the rubber strap.

Product code: MG04A2301

Adjustable timing pulley puller

An adjustable timing pulley puller is a special tool used in the assembly process of engines.

Product code: MG04A2213

Valve Spring Compressor

Valve Spring Compressor is compresses overhead valve springs with rocker arm studs. This tool can be used with the head either on or off the engine. Jaws adjust to fit most overhead valve engines. Adjustable handle allows for clearance in tight areas.

Product code: MG04A2170

Exhaust backpressure test kit

The tool allows auto mechanics and vehicle owners to easily check that the exhaust system is working properly and that there are no issues with exhaust backpressure.

Product code: MG04A2167

Exhaust spring clamp remover

An exhaust spring clamp remover is required for the professional and safe installation of the spring. Used to remove and install fasteners. Made of high quality steel. Can be used with a 17 mm socket or wrench.

Product code: MG04A2087

Vacuum and pressure gauge

Measuring range (pressure) 0.1bar, 14, 18mm coupling adapter

Product code: MG50190

Ball joint separator set, 5pcs

Ball joint separator set, 5pcs ideal for assembling and disassembling wishbones,, ball joints, socket joints, tir rods and individual gimbal joints.

Product code: MG04B3051

Timing lock for Ford, Fiat, Citroen, Peugeot 2.2 TDCI engines

Timing lock for Ford, Fiat, Citroen, Peugeot 2.2 TDCI engines.

Product code: C01/0179

Rear Suspension Bush Puller Ford Mondeo

Rear Suspension Bush Puller Ford Mondeo

Product code: W0020

Stud Wrench 8" 12-21mm

Fully adjustable with a one-handed squeeze. Efficient ratcheting by releasing, then re-gripping the object. Often removes nuts and bolts damaged by other tools.

Product code: G00860

Hydraulic jaw puller kit 5t

Multi-function puller with adjustable two or three leg function. Allows bearings, gears, etc. to be easily removed with minimal effort by use of the hydraulic puller.

Product code: G00910

CV joint clamp banding tool

CV joint clamp banding tool is suitable for installation and tightening of band-style clamps on CV joint boots, power steering rack and pinion steering gear boots.

Product code: G01653

Brake piston presser. Max 70mm jaw spread.

Essential tool for pressing in the brake piston to allow insertion of new brake pads.

Product code: G02534

Oil filter strap wrench 85-95mm

Band wrench for replacing oil filters in cars and vans. Designed for filters with a diameter of 85 to 95mm.

Product code: G02562

Oil filter strap wrench 95-110mm

Band wrench for replacing oil filters in cars and vans. It is designed for automotive repair.

Product code: G02563

Lever style valve spring extractor. For 8, 16, 24V engines

Lever press designed to disassemble and remove valve springs in 8V/12V/16V/24V OHV, OHC and CVH engines. Adapters: 24, 30, 35mm

Product code: G02573

Hook and pick set, 9pcs

Hook and pick set for removing oil seals, o-rings and gaskets

Product code: G02708

Wiper arm puller

Wiper arm puller. The puller is used to remove car wiper arms. Made of durable chrome-molybdenum steel.

Product code: G02770

Hydraulic wheel hub puller 10T

Hydraulic wheel hub puller 10T

Product code: MG04B1044B

Petrol & Diesel Engine Compression and Leakage Test Kit

Petrol & diesel engine compression and leakage test kit, with glow plug-, injector-, and spark plug adaptors

Product code: MG04A1066D

Cylinder Scraper Set

This kit is designed for scraping cylinders. They can be of great help, e.g. during engine rebuilds or engine repairs, when, for example, the inner surfaces of the cylinders need to be cleaned or renewed.

Product code: MG04C1025

Piston ring pliers, 110-160mm

Designed for installing and removing piston rings. The jaws are designed to protect the piston ring from damage.

Product code: MG50335C

Oil drain hose for VW and AUDI direct shift gearbox filter (DSG)

Oil drain hose for VW and AUDI direct shift gearbox filter. Allows the controlled draining of the oil.

Product code: C01/0048

Shaft locking pin for VW TSI, FSI, TFSI engines

Shaft locking pin for VW TSI, FSI, TFSI engines

Product code: C01/0090

8 PCS professional brake repairing tool

Contains the most popular brake tools used for servicing drum brakes on the most vehicles.

Product code: MG04B4040

Universaladjustable fuel tank lid remover

Universaladjustable fuel tank lid remover, which can be adjusted between 80mm-199mm, so it is a suitable choice for many types of cars.

Product code: MG04A3077

Denso injector adapter puller M20x1 (hardened)

Product code: W0639

Windscreen nozzle adjusting tool Opel Astra J, Insignia, Cascada, Zafira

Designed specifically for the unique washer jets fitted to vauxhall/opel vehicles. Ideal for adjusting stuck windscreen nozzles. With four gripping claws and angled profile.

Product code: W0638

Glow plug reamer, 9mm, length 175mm

Removes deposits between the glow plugs and cylinder head. Prior to fitting new glow plugs it is recommended to clean the glow plug shafts. Can be used universally for most vehicle types.

Product code: W0637

Variable timing cam lock for Volvo V40, S40

VCT lock for Volvo V40, S40.

Product code: W0636

Timing box cover oil seal guide pin for Ford 1.8 TDCI, TDDI

This oil seal guide pin ensures a tight seal on the timing box cover, preventing oil leakage from the gearbox. This is crucial for proper engine operation and longer life.

Product code: W0635

Glow plug reamer, 11mm

Tool for reaming broken glow plug shafts. Diameter: 11mm. Length: 11cm.

Product code: W0634

Bearing and silent puller for BMW rear axles

Extractor for the removal and installation of the ball joint bearing on the wheel support of the rear axle on BMW 1, 2, 3, 4, X1, X3, X4, i8 series.

Product code: W0627

Timing lock Porsche 911, Boxster, Cayman 2.7, 3.2, 3.4, 3.6, 3.8

This tool is used to lock the engine's timing components in place during maintenance or repair procedures, ensuring precise alignment and synchronization of the camshafts and crankshaft. Accurate timing is essential for optimal engine performance and efficiency.

Product code: W0626

Fuel filter wrench for Ford Transit 2.2 TDCI

Fuel filter wrench for Ford Transit and Tourneo 2.2 TDCI. Used for the removal and installation of fuel filters in the specified vehicles. Provides a secure and reliable grip on the fuel filter, facilitating easy loosening and tightening. Constructed with robust materials to ensure long-lasting performance.

Product code: W0625

Lock timing Porsche 2.5; 2.7; 3.2; 3.4

This tool is used to immobilize the camshafts and crankshaft in their proper positions during timing belt or chain replacement, as well as other engine maintenance tasks.

Product code: W0623

Lock balancer shaft BMW N20 / N26 + Repair kit seal oil pump

Product code: W0618

Lock wheel high pressure pump Volkswagen, Audi 3.6 L

Product code: W0617

Air conditioner clutch holding wrench, adjustable

A/C clutch holding wrench, adjustable.

Product code: W0616

Timing belt tensioner wrench, Citroen, Fiat, Peugeot, 7mm

Timing belt tensioner wrench for Citroen Berlingo, C5, C8, Jumper, Fiat Ducato, Peugeot 206, 306, 406, Boxer, Expert, 7mm.

Product code: W0614

Balance shaft lock Citroen , Peugeot , Ford , Land Rover 2.2

The purpose of the balance shaft lock tool is to prevent the balance shaft from rotating while other components are being worked on, such as timing belt replacement or engine repair. By immobilizing the balance shaft, the tool ensures accurate positioning and alignment of the related components.

Product code: W0611

Timing lock Jaguar, Land Rover 4.0, 4.2, 4.4 petrol by 2010

This tool allows the camshafts to be secured securely in the engine when maintenance or repair is required. The timing gear is an extremely important part of the operation of the engine, and with the help of the fixing tool, accurate adjustment and correct installation can be carried out.

Product code: W0609

Rear axle nut wrench for Renault, Nissan, VW, Opel, Mercedes

For loosening the groove nut on rear wheel hubs. OEM codes: T50017, CH50112, 906589000700, 8201079089

Product code: W0608

Crankshaft lock BMW, Mini B37 B38 B47 B48 B58

Product code: W0607

Camshaft lock for Opel 2.0 CDTi, 2014-2017

Holds the camshaft in service position while replacing the camshaft drive belt. For Opel 2.0 CDTI, CDTI EcoFLEXengines. OEM: EN 51413, EN 955-2, EN 51412, EN 51414 and EN 51411.

Product code: W0606

The keys for locking the pulley shaft Mercedes M112, M113, M271, M272, M273, M642

Product code: W0604

Variator key for VAG 1.4, 1.6 TSI and TFSI engines

Variator key for VW, Audi, Seat, Skoda 1.4, 1.6 TSI and TFSI engines.

Product code: W0603

Injection pump removal tool for Renault, Opel, Nissan 2.2, 2.5 DTI, CDTi

A tool to remove the diesel pump sprocket to allow the removal of the fuel pump without disturbing the timing belt on Renault 2.5 and 2.2 diesel engines found in Renault, Opel and Nissan vans.

Product code: W0602

Camshaft lock for Mercedes Benz M642, 3.0 24v V6

The Timing lock for Mercedes Benz M642, 3.0, 24v, V6 diesel engines, which is used for stable locking of camshafts. This tool helps to maintain, install and service the camshafts of Mercedes Benz M642, 3.0, 24V, V6 diesel engines.

Product code: W0600

The key to the timing belt tensioner VW, Audi, Skoda 1.4 TSI / TFSI 16mm

Product code: W0597

Timing lock for BMW E30, E36, E46, E34, E39, E38 engines

Timing lock for BMW M42, M44, M50, M52, M54, M56, M52TU, S50US, S52US.

Product code: W0595

Fuel filter wrench for Volvo S60, V50, XC90, S80, C30, C70 engines

The diesel fuel filter wrench is for the removal and installation of the fuel filter on Volvo and VW diesel engines. Drive: 100 (3/8") square. OEM: T50011/9997084.

Product code: W0593

Wrench for KM13 bearing nuts

Wrench for KM13 bearing nuts with an outer diameter of 91mm and an inner diameter of 78mm, this wrench provides a secure and accurate grip on the specific size of KM13 bearing nuts.

Product code: W0592

Lock timing Mercedes M112 / M113

Product code: W0591

Delphi piezoelectric injector puller for Mercedes, Kia, Hyundai

The purpose of the device is to safely and effectively remove piezoelectric injectors from the vehicle engine. The tool allows piezoelectric injectors to be removed particularly easily and without damage, allowing access to service work and ensuring correct operation.

Product code: W0589

Oil pump locking plate Ford, Citroen Fiat 2.0, 2.2, 2.4, 3.2 TDCI, TDDI, Duratorq

An oil pump locking plate is a specialized tool used for locking the oil pump sprocket in place during the removal or installation of the timing belt or chain on Ford, Citroen, and Fiat engines. Prevents the sprocket from rotating.

Product code: W0588

Sleeve and silent puller for BMW 1, 3, X1 rear arms

Sleeve and silent puller for BMW 1 3, X1 Hatchback, Coupe, Convertible, Saloon, Touring rear arms. (OE 33326763092)

Product code: W0587

Injection pump puller VW, Seat, Skoda 1.6, 2.0 TDI CR

Remove your VW, Seat, or Skoda's high-pressure pump hub with ease using our Injection Pump Puller. Designed for 1.6L and 2.0L TDI CR diesel engines. OEM code: T40064.

Product code: W0586

Chain tensioner BMW N40, N42, N45, N46, N52 and N54 / Mini N12, N14, N16 and N18

The chain tensioner can be used in BMW N40, N42, N45, N46, N52, N54 and Mini N12, N14, N16, N18 engines. The chain tensioner serves to properly tension the timing chain in the engine, ensuring accurate operation and reliability.

Product code: W0585

Locking of the flywheel and the pulley shaft Renault Nissan 1.4, 1.6; 2.0; 2.3

Product code: W0584

Puller Injectors 2.0 2.2 HDI Bosch

The Puller for Injectors on 2.0 and 2.2 HDI engines with Bosch injectors is a specialized tool used for removing the injectors from the cylinder head. This puller is designed to securely fasten to two specific points: behind the valve seat and the injector body.

Product code: W0583

Oil drain socket set 12pcs

Oil drain hex and square sockets set. Square: 8, 11, 13mm. Hex: 8, 9, 10, 12, 14, 17mm.

Product code: CHS-E1156

Timing lock Jaguar, Land Rover, Range Rover 2.7 TDV6 diesel

Timing lock for Jaguar, Land Rover, Range Rover 2.7 TDV6 diesel engines. OEM codes: 303-1117, 303-1116, 303-1132, 303-1126 / 0195H.

Product code: W0582

Key to the oil plug Volkswagen, Audi, Seat, Skoda TSI; TFSI

The Key for the Oil Plug is a specialized tool designed for Volkswagen, Audi, Seat, and Skoda vehicles equipped with TSI (Turbocharged Stratified Injection) or TFSI (Turbo Fuel Stratified Injection) engines. This tool is specifically tailored to facilitate the removal and installation of the oil plug during oil changes or maintenance procedures.

Product code: W0581

High pressure pump sprocket lock for VW, Audi 3.6 V6 engines

High pressure pump sprocket locking tool for VW, Audi 3.6 V6 4V engines (OEM T10332)

Product code: W0580

Timing lock Jaguar 2.0 GTDi, Land Rover 2.0 Si4

Product code: W0578

Wrench for the front swingarm pivot pin caps on Citroen, Peugeot, Toyota

Socket wrench for the front swingarm pivot pin caps on Citroen (Jumpy, SpaceTourer), Peugeot (Expert, Traveller), Toyota (Proace) suspensions. 2016 and on.

Product code: W0577

Tool for setting the magnetic ring Citroen, Peugeot, Jaguar, Land Rover 2.7 ans 3.0 TD V6 HDI

Tool for setting the magnetic rings in Citroen , Peugeot , Jaguar , Land Rover 2.7 and 3.0 TD V6 HDI engines.

Product code: W0576

Cap rear hub Ford Transit after 2014

This special installation tool is specially designed for Ford Transit vehicles for rear wheel nuts. The tool fits directly into the hub, allowing for accurate centering and locking in the hub.

Product code: W0574

Key/nut for the bearing nut KM 10, internal stud bolt

This tool is provide a secure fit and facilitate the proper tightening or loosening of the locknut during bearing installation or removal processes. The key/nut is manufactured using hardened, high-grade materials to ensure durability and strength, making it capable of withstanding the forces involved in working with bearings and locknuts.

Product code: W0573

Key / nut for the bearing nut KM 7 , studs internal

Product code: W0569

A key for locking the pulley shaft Ford / Volvo 1.4, 1.6, 1.8, 2.0, 2.3 16v Duratec

Product code: W0566

Lock nut socket wrench, KM 4, 28.3mm, 4 teeths

Socket wrench for bearing nuts, KM 4, 28.3mm, 4 teeths, hex drive.

Product code: W0565

Key / nut for the bearing nut KM 9 , studs internal

This wrench is specifically designed to fit the KM 9 groove nut with teeth on the inside.

Product code: W0564

Lock timing Jeep Grand Cherokee CRD; Grand Cherokee Multijet 3.0 CRD V6

The Timing Lock is a specialized tool designed for locking the timing system of Jeep Grand Cherokee CRD and Grand Cherokee Multijet 3.0 CRD V6 vehicles. It aids in the accurate installation and adjustment of the timing belt or chain, contributing to the overall performance and longevity of the engine.

Product code: W0563

Front axle hub socket wrench for Suzuki Jimny, Vitara, Grand Vitara

Front axle hub socket wrench for Suzuki Jimny, Vitara, Grand Vitara. Diameter: 56mm, hexagonal drive.

Product code: W0562

Puller injectors Citroen Jumper; Peugeot Boxer; Fiat 2.3 JTD HPI

Product code: W0560

Injector puller for Fiat, Citroen, Iveco 3.0 HPI

Specialized puller for removing injectors from the engine block.

Product code: W0558

Flywheel lock for Kia, Hyundai

Flywheel lock for Kia, Hyundai. Engine codes: 1.0 G3LA, GELC 1.2, G4LA 1.4, G4LC, G4FA 1.6, G4FC, G4FD, G4FJ 2.0, G4KD, G4KF, G4NC, G4NA, G4ND, G4NE 2.4, G4KE, G4KJ 2.7, G6BA.

Product code: W0557

Puller injectors Fiat; Citroen; Iveco 2.2 TDCI, HDI, JTD

Product code: W0556

Mercedes timing lock M271 : E18ML DE18ML E16ML

The "Mercedes timing lock M271" is a specialized tool used for locking the timing components in place during maintenance or repair procedures on Mercedes-Benz engines with the M271 designation. The M271 engine is a series of inline-four-cylinder gasoline engines used in various Mercedes-Benz models.

Product code: W0555

Lock the timing of VW, Audi, Seat, Skoda - 2.0 FSI / TFSI – petrol

Product code: W0554

Locking pin for Renault and Nissan 1.6 DCI R9M timing locks

Locking pin for Renault Megane, Scenic, Grand Scenic, Nissan Qashqai , Qashqai 2, 1.6 DCI R9M engine timing tool.

Product code: W0553

Injector puller Fiat Opel 1.9 JTD ; CDTI

The injector puller is a specialized tool used for removing injectors from the cylinder head of diesel engines. It is specifically designed for use with Fiat, Opel, and Lancia vehicles equipped with 1.9 JTD/CDTI diesel engines.

Product code: W0551

Timing lock Ford 2.2 TDCI engines

Set of tools for locking the crankshaft and flywheel on Ford Transit 2.2 TDCI from 2006 and onwards for Econetic and HDT engines.

Product code: W0548

Lock to control the timing of Saab Opel Chevrolet 1.0; 1.8; 2.0

The purpose of the device is to stably fix or lock the engine control during work processes such as replacing camshafts, adjusting valve clearance or maintaining the control chain.

Product code: W0547

Lock nut socket wrench, grooved, KM7

Lock nut socket wrench, grooved, KM7.

Product code: W0545

Cap / key of the bearing grooves 8 hp; 58mm

This cap/key is designed for bearings with 8 grooves and a diameter of 58mm. It is constructed using high-grade materials, ensuring durability and reliability during use. The purpose of the Bearing Groove Cap/Key is to provide a secure fit over the bearing, allowing for easy installation, removal, or adjustment.

Product code: W0544

Camshaft Lock BMW M62 Vanos

Product code: W0543

Balancing shaft lock with crankshaft alignment lock BMW N47

The balancing shaft lock is designed to hold the balancing shaft(s) in place during maintenance or repair work. The tool ensures that they do not move while other components are being serviced or replaced. The crankshaft alignment lock is used to keep the crankshaft in the correct position during maintenance tasks.

Product code: W0542

Injection pump gear puller for KIA, Hyundai 2.0, 2.2 CRDI

This tool allows the fuel pump sprocket to be pulled from the pump. Essential for sprocket removal.

Product code: W0541

Socket wrench for setting the variable valve timing in Audi, VW, Seat, Skoda 1.8, 2.0 TSI

This tool is a specialized tool designed for precise adjustment of the variable valve timing mechanism during maintenance or repair procedures. This socket wrench ensures accurate positioning of the variable valve timing components, allowing for optimal engine performance.

Product code: W0540

Rear bushing puller for Opel Corsa B, C, Tigra

Rear silent puller for Opel Corsa B, C, Tigra. Opel OEM: 24443815, 5402636.

Product code: W0539

Puller Injectors Chrysler Voyager 2.5; 2.8 CRD

Product code: W0538

Injector puller for removing Denso injectors M25x0,5 on Toyota and Mazda

The Injector Puller designed specifically for removing Denso injectors with an M25x0.5 thread on Toyota and Mazda vehicles is a versatile and reliable tool engineered to simplify the injector removal process.

Product code: W0535

Lock timing Opel 1.6 SIDI Pertol

Product code: W0533

Adapter for loosening stuck M12x1 injectors

Adapter for loosening stuck M12x1 injectors

Product code: W0531

Camshaft lock for Opel 2.0, 2.4 Ecotec engines with timing chain

Camshaft lock for Opel, Chevrolet, SAAB 2.0, 2.4 Ecotec engines with timing chain.

Product code: W0529

Timing lock for Opel 1.6 CDTI and EcoFlex CDTI engines (2013 and onwards)

A comprehensive kit to lock the 1.6L diesel engine into its timed position for the removal and replacement of the timing chain.

Product code: W0528

Timing lock for Porsche 3.0, 3.6

This tool allows the camshafts to be secured securely in the engine when maintenance or repair is required. The timing gear is an extremely important part of the operation of the engine, and with the help of the fixing tool, accurate adjustment and correct installation can be carried out.

Product code: W0526

Lock and pulley puller Jaguar and Land Rover

This tool is specifically designed for Jaguar and Land Rover 3.2, 3.5, 4.0, 4.2, 4.4 V8 engines. The pulley can be stably fixed or removed from the motor shaft with the help of the pulley lock and puller. This allows belt replacement or pulley maintenance during other operations.

Product code: W0525

Timing lock set for Ford 1.6 EcoBoost engines

Timing lock set for setting Ford 1.6 EcoBoost engines into the timed position.

Product code: W0524

Flaring tool kit for brake lines

For making ends of brake lines or copper, copper-nickel and thin-walled steel pipes. Adapters: 4.75, 6.35, 7.95, 9.50, 11.10, 12.70, 15.87mm

Product code: CKB09065

Crankshaft rear oil seal replacement tool for Iveco, Fiat, Citroen, Peugeot 3.0

Crankshaft rear oil seal replacement tool for Iveco, Fiat, Citroen, Peugeot 3.0, 13x12.5 (Corteco, DT, LEMA, Ajusa)

Product code: W0522

Silent puller for VW, Audi, Seat, Skoda engines and gearboxes

Allows the replacement of engine and gearbox silent blocks in VAG engines.

Product code: W0521

Puller sleeve back beam (middle) BMW 5 (E 60, E61) BMW 6 (E63, E64) (oem 33176770825)

This tool allows easy and safe removal of the center silencer from the rear beam without disassembling other components or the entire beam system.

Product code: W0520

Puller sleeve for BMW bushings

Pulling tool for the assembly and thedisassembly of bushings on the car. BMW: 5 (E60), 5 Touring (E61), 6 (E63), 6 convertible (E64).

Product code: W0519

Key / nut for the bearing nut KM 12

This tool provides a secure fit and facilitates proper tightening or loosening of locknuts during bearing installation or removal processes. The key is made using hardened, high-quality materials, ensuring durability and strength, so it can withstand the forces that occur when working with bearings and lock nuts.

Product code: W0513

Key for setting the crankshaft Fiat; Opel 1.3 CDTI

This specialized tool is used to immobilize and lock the crankshaft in the correct position during timing belt replacement or other maintenance procedures.

Product code: W0512

Crankshaft holding wrench Opel 1.6 SIDI

Crankshaft holding wrench for Opel Cascade, Astra J, Zephyr C, Insignia 1.6 Turbo SIDI, SIDI Turbo, EcoFLEX petrol.

Product code: W0511

Bearing nut socket wrench, KM 12, internal pins

Bearing nut socket wrench with internal pins. For KM12 M60 x 2 nuts.

Product code: W0510

Rear beam silent puller for Renault Laguna III and Laguna Coupe

Rear beam bushing puller for Renault Laguna III and Laguna Coupe. OEM: 55 04 400 01R, 55 04 466 24R, 55 04 500 01R.

Product code: W0503

Wrench for the front wheel hub nuts of Iveco 35 vehicles

Special key for mounting and dismounting the front hub nut of Iveco 35 vehicles. Inner diameter: 62.5mm.

Product code: W0502

Puller sleeve the arm forward (lower) L / R BMW X5 (E70) X6 (E71, E72), 3.0-4.8 (oe sleeve 31106778015)

The tool is used to remove and install the bushing sleeve without the need to disassemble the entire suspension system or remove the swing arm from the vehicle. It helps save time and effort during maintenance or repair procedures related to the front lower swing arm bushings.

Product code: W0501

Puller hub bearing the brake disc Ford Transit

The puller hub bearing the brake disc is a special tool used for mounting and dismounting brake disc bearings on Ford Transit vehicles.

Product code: W0500

Puller hub / bearing Fiat Ducato Citroen Jumper

Product code: W0499

BMW crankshaft pulley turning tool

BMW crankshaft pulley turning tool for M47, M57, N47, N57.

Product code: W0498

Timing lock for Opel, Fiat, Alfa Romeo, Chevrolet 1.4, 1.6, 1.8 16V engines

Tool set for GM 16-valve engines found in Opel, Chevrolet, Fiat and Alfa Romeo models from 2003 to 2014.

Product code: W0497

Timing lock Opel, Fiat 1.6, 1.8 16V

Timing lock Opel, Fiat, Chevrolet 1.6, 1.8 16V Twinport engines.

Product code: W0496

Pulley shaft locking wrench Opel, Renault, Nissan 1.6 DCI, 2.0 DCI, 2.3 DC

Pulley shaft locking wrench Opel, Renault, Nissan 1.6 DCI, 2.0 DCI, 2.3 DC

Product code: W0495

Puller Injectors Fiat Opel Suzuki 1.3 JTD CDTI DDIS

Product code: W0494

Timing lock for Citroen, Peugeot, Mini 1.4 1.6 16V VTi, THP

Timing lock for Citroen, Peugeot, Mini 1.4 1.6 16V VTi, THP.

Product code: W0493

Axle mounting bolts, adapters for Volkswagen and Audi 2.0 - 4.2 liter engines, 3pcs

Bolts, adapters for fixing and stabilizing the shaft.

Product code: W0492

Timing lock set for BMW 2.0, 3.0D N47, N47S, N57 diesel (2007 - 2012)

Timing lock set for BMW 2.0, 3.0D N47, N47S, N57 diesel (2007 - 2012).

Product code: W0491

Puller hub bearings Renault Trafic, Opel Vivaro 2.0 DCI

Product code: W0487

Lock pulley shaft Volvo (T4, T5) 1.6, 2.0 GDTI

Product code: W0486

Puller / Press sleeve metal - rubber arm rear longitudinal Honda Civic, CR-V, Concerto, CRX, Rover 200 (OE-sleeve 52385 SR3-000)

Product code: W0485

Oil filter wrench Fiat, Opel, Alfa Romeo 1.3, 1.6, 1.9. 2.0 - 75.3 x 16 hex

Our oil filter wrench Fiat, Opel, Alfa Romeo 1.3, 1.6, 1.9, 2.0 - 75.3 x 16 hexagonal product is an ideal choice for all car owners. The wrench helps you change the oil filter efficiently and easily, saving you time and energy. Thanks to its size of 75.3mm x 16mm, it fits perfectly with the above-mentioned models.

Product code: W0484

Fuel pump wrench for Volkswagen Crafter 2006-2016

The Fuel Pump Wrench Volkswagen Crafter 2006-2016 is a specially designed wrench ideal for loosening the fuel pump nut. This key is made of high quality material and perfectly fits Volkswagen Crafter 2006-2016 vehicles. Thanks to its ease of use, you can easily and quickly carry out the necessary maintenance work.

Product code: W0483

Lock timing Audi 2.8 FSI / FSI 3.2 / 3.0 TFSI

This tool helps immobilize various components during timing belt or chain replacements, ensuring precise alignment and preventing any unwanted movement.

Product code: W0481

Timing lock for BMW E39, E46, E61, E38, E65, E66, X3, X5 Vanos engines

Timing lock for BMW 2.0 2.2 2.3 2.5 2.8 3.0 petrol engines.

Product code: W0480

Lock timing MERCEDES-BENZ 1.8-2.1 engines M651 MB (07-)

The kit allows positioning the camshafts in the installed position, as well as for turning, installing and removing the crankshaft pulleys.

Product code: W0478

Lock timing Mercedes 2.0 2.1 2.2 CDI set

Product code: W0477

Pump sprocket remover for Hyundai and Kia 1.1, 1.4, 1.5, 1.6, 1.7 CRDI

Pump sprocket remover for Hyundai and Kia 1.1, 1.4, 1.5, 1.6, 1.7 CRDI diesel engines (from 2004). OEM: 09331-2A010, 09331-2A000.

Product code: W0476

Lock timing Vanos BMW N53, BMW N54 Vanos

Product code: W0475

Lock timing Honda, Land Rover 2.0 TD / TDI / SDI

This lock ensures precise alignment of the camshafts and crankshaft, allowing for accurate timing adjustments and component replacements. The timing lock provides essential support during timing belt replacement, camshaft inspection, or other timing-related procedures. It immobilizes the camshafts and crankshaft, preventing any unintended movement and ensuring proper synchronization of the engine's internal components.

Product code: W0468

Injector removal adapter for Renault 2.3 DCI, after 2012, 20mm

Injector removal adapter for Renault 2.3 DCI, after 2012, 20mm.

Product code: W0467

Timing lock Land Rover 2.5D / Td5 on the timing chain

A tool often used to fix the control of the Land Rover 2.5D/Td5 engine on the control locking chain. This special tool locks the timing chain in place, preventing it from moving or shifting during timing adjustment.

Product code: W0466

Lock injection pump Rover, Land Rover, Jaguar 3.0

Product code: W0465

Timing lock for Renault, Nissan 1.6 DCI

Timing lock for Renault, Nissan 1.6 DCI.

Product code: W0464

Timing lock for Peugeot, Citroen 1.0 and 1.2 VTi petrol engines

Timing lock for Peugeot, Citroen 1.0 and 1.2 VTi petrol engines. Engine codes: EBO (ZMZ), EB2 (HMZ).

Product code: W0463

Timing lock for Renault, Nissan 3.0 DCi

Timing lock for Renault, Nissan 3.0 DCi chain driven engines. Engine code: V9X.

Product code: W0462

Flywheel and injection pump locking pin for BMW

Flywheel and injection pump locking pin for BMW. M40, M42, M43, M44, M50, M52, M52TU, M54, M56 engines.

Product code: W0460

Shaft pulley lock for Ford 1.6 EcoBoost

Shaft pulley locking tool for Ford Fiesta, Fusion, Focus, C-Max, S-Max, Galaxy, Kuga, Turneo Connect, Grand Tourneo Connect, Transit Connect 1.6 EcoBoost engines.

Product code: W0459

The key for assembly and disassembly, and locking pulley BMW M52 / M54 / M56

Product code: W0458

Camshaft lock for Ford 1.6 EcoBoost

Camshaft lock for Ford Fiesta, Focus, Galaxy, Kuga, Mondeo, Transit, Tourneo, C-Max, B-Max 1.6 EcoBoost engines.

Product code: W0457

Injection pump belt pulley tool for Jeep Grand Cherokee 3.1 TD

Injection pump belt pulley tool for Jeep Grand Cherokee 3.1 TD.

Product code: W0456

Injection pump puller for Chrysler Voyager 2.5 TD

Injection pump puller for Chrysler Voyager 2.5 TD

Product code: W0455

Camshaft lock for Opel, Chevrolet, Saab 2.8, 3.0, 3.2, 3.6 engines

Camshaft lock for Opel, Chevrolet, Saab 2.8, 3.0, 3.2, 3.6 petrol V6 engines with timing chain.

Product code: W0454

Crankshaft rotation tool Volkswagen 2.5 TDI, Touareg, Transporter T5

Crankshaft rotation tool Volkswagen 2.5 TDI, Touareg, Transporter T5

Product code: W0452

Universal wheel puller injection pump Ford 1.8 TDCI

For installing and removing the injection pump in Ford 1.8 TDCI engines.

Product code: W0450

Key clutch disc air conditioning Denso 23 mm (hardened)

Product code: W0448

Key clutch disc air conditioning Denso 22 mm (hardened)

Product code: W0447

Inertial injector puller set BMW 1.8, 2.0 N47

Inertial extractor for BMW E87, E90, E91, E92, E93 1.8d and 2.0d N47 injectors. The range of application can be expanded with more adapters.

Product code: W0439

Front crankshaft oil seal puller for Iveco, Fiat 2.3

This tool is designed to extract the front oil seal safely and efficiently without causing damage to the seal or the crankshaft.

Product code: W0437

Timing lock for Renault, Peugeot, Citroen 3.0 V6 24V petrol engines

Timing lock for Renault, Peugeot, Citroen 3.0 V6 24V petrol engines.

Product code: W0436

Key to lock the pulley Renault, Peugeot, Citroen 3.0 V6

Product code: W0435

Crankshaft front oil seal puller for Iveco 3.0

The crankshaft front oil seal puller is a specialized tool designed to remove the front oil seal without causing damage to the crankshaft or engine components.

Product code: W0434

Hydraulic cylinder to the pullers, press and injectors - 15 Ton

With a 15-ton pressing force, this hydraulic cylinder delivers exceptional power to handle tasks. Whether you need to remove stubborn parts, press components together or work with injectors, this cylinder provides the necessary force to get the job done efficiently.

Product code: W0432

Shaft locking pin Volkswagen / Audi 2.0 / 2.4 / 3.2 FSI / 2.5 / 3.2 V6 TDI

This shaft locking pin is a precision-made tool crafted for aiding in the maintenance and repair of specific Volkswagen and Audi engines. 

Product code: W0431

Oil suction gun. Capacity: 500ml

Oil suction gun is suitable for removing or replacing oil in engines and gearboxes.

Product code: G01150

Power steering pump puller

This tool facilitates the safe removal of the power steering pump.

Product code: W0430

Magnetic flywheel puller for Suzuki, M50x1,5

Magnetic flywheel puller for Suzuki, M50x1,5.

Product code: W0429

Puller sleeve front beam Mercedes ML W163 (oe bushings 163 330 02 75/1633300275)

Product code: W0428

Puller of bushings of the front control arm Volkswagen T4

The puller is used to install and remove control arm bushings on the car.

Product code: W0427

Injection pump removal tool for BMW N47, N47S Common Rail engines

Pinion extractor for diesel injection pumps in BMW N47, N47S and N57 1.8d, 2.0d, 2.5d, 3.0d engines manufactured in 2007 - 2015. This extractor is compatible with new generation BMW engines that have the distribution in the back (at the flywheel).

Product code: W0423

Bushing installer press for Audi A4 Avant 94-01 rear beam (only for pressing)

Silent installer press for Audi A4 Avant 94-01 rear beam (only for pressing).

Product code: W0421

Lock timing Citroen AX 1.0, 1.1, 1.4, BX 16, 19, BX-16 Peugeot 106, 205, 405 1.0, 1.1, 1.4, 205, 305, 309

This tool helps to secure various components during a timing belt or chain change, ensuring accurate alignment and preventing unwanted movement. This tool is made of premium quality materials and ensures a precise fit and stable attachment for the mentioned car types. Easy to use and contribute to the efficiency of the car mechanic's work processes to ensure the reliable operation of the car's timing system.

Product code: W0420

Key to timing belt tensioner VW, Audi, Seat, Skoda 1.2 / 1.4 TSI / TFSI (2013) (T10499)

This is an essential tool for precise and efficient timing belt adjustments. Designed specifically for 1.2/1.4 TSI/TFSI engines found in VW, Audi, Seat, and Skoda vehicles manufactured in 2013. It ensures accurate and secure timing belt tension adjustments for optimal engine performance.

Product code: W0419

Lock Crankshaft VW AUDI V6 diesel; gasoline

To lock the crankshaft on VW and Audi V6 diesel or gasoline engines, a crankshaft locking tool is used. This specialized tool helps immobilize the crankshaft, ensuring accurate timing alignment during maintenance or repair procedures.

Product code: W0418

Balancing shaft locking device BMW N40, N42, N45, N46

The balancing shaft locking tool developed for BMW N40, N42, N45 and N46 engines is an essential tool when replacing the timing belt, chain or camshaft.

Product code: W0417

Lock camshaft BMW gasoline 1.8 / 2.0 N42 / N46 / N46T Valvetronic

Product code: W0414

Crankshaft locking pin for Ford 1.8, 2.0 diesel engines

Securely lock your Ford 1.8 and 2.0 diesel engine's crankshaft with our locking pin. Prevent engine damage and ensure precise timing. Buy now!

Product code: W0413

Lock camshaft for Citroen 1.9D / TD engines (94-02)

This tool is specifically designed for the precision locking of the camshaft, facilitating correct timing during belt changes and other engine repair tasks. It ensures that the camshaft remains in a fixed position, preventing unwanted rotation which could lead to engine damage.

Product code: W0412

Puller injectors 2.0 HDI

Product code: W0411

Crankshaft pulley lock Volkswagen, Audi 1.9, 2.5 TDI

Crankshaft pulley lock for Volkswagen Transporter, LT and Audi 100, A6 1.9, 2.5 TDI engines.

Product code: W0410

Injector puller adapter HDI 2.0, 1.3 CDTI

Injector puller adapter HDI 2.0, 1.3 CDTI

Product code: W0409

Lock the timing VW Transporter 2.4D (95-03), Volkswagen Crafter 2.5 TDi (06-09)

The timing lock tool is a special tool used for VW Transporter 2.4D (1995-2003) and Volkswagen Crafter 2.5 TDi (2006-2009) engines.

Product code: W0408

Key locking the crankshaft Ford Mondeo, Transit 2.0 2.2 2.4 3.2 Duratorq TDCi (01-)

Product code: W0407

Crankshaft locking pin Ford, Volvo, Mazda 1.25, 1.4, 1.6 Zetec, Duratec

Crankshaft locking pin Ford Fiesta, Focus, Volvo C30, S40, V50 Mazda 1.25, 1.4, 1.6 Zetec, Duratec engines.

Product code: W0406

Engine timing tool set for Ford and Volvo 1.6 EcoBoost

This kit has been designed for setting and adjusting the timing on 1.6L direct injection petrol engines fitted with variable valve timing.

Product code: W0405

Viscous clutch key Volkswagen Crafter 2.5 TDI

The Volkswagen Crafter 2.5 TDI viscous clutch wrench is a special tool that helps remove and install the viscous clutch unit. For Volkswagen Crafter models with a TDI common rail engine.

Product code: W0404

Key to loosening the rear hub nuts M55X1,5 Mercedes Sprinter, VW Crafter after 2006 (hardened)

Key to loosening the rear hub nuts is designed to fit the specific dimensions of the hub nut and provide the necessary grip and torque for loosening it.

Product code: W0403

Press the king pins the upper and lower Jeep - Cherokee, Grand Cherokee, Wrangler

The tool is used to remove and install the kingpins in the steering knuckle assembly. Use the king pin press tool to press out the king pin from the steering knuckle. The tool will apply force to push the pin out of its housing. Once the king pin is pressed out, you can inspect it for wear or damage and replace it if necessary.

Product code: W0401

Press the down crossover pins Jeep Cherokee, Grand Cherokee, Wrangler

Product code: W0399

Adapters to bolts down Jeep - Cherokee, Grand Cherokee, Wrangler

Product code: W0398

Injector puller HDI Siemens M25 x 1 (hardened)

This injector puller is specially designed for HDI Siemens injectors with M25 x 1 thread.

Product code: W0394

Injection pump locking pin for Mercedes cars with Lucas pump

Injection pump locking pin for Mercedes cars with Lucas pump. OEM: OM602, OM604, OM605, 601 589 052100.

Product code: W0392

Denso injector valve wrench

3-pin key for removing and installing the return valve on Denso Common Rail diesel injectors.

Product code: W0391

Crankshaft locking tool for BMW N12, N14, N40, N42, N45, N46, N52

The crankshaft locking tool helps to lock the crankshaft in position, thus allowing the necessary work processes to be carried out. This is extremely important, because if the crankshaft moves or does not lock properly, the timing system can be faulty, which can cause serious problems with the operation of the engine.

Product code: W0390

Set for knocking injectors Opel Renault 2.0 DCI / CDTI and others (hardened)

Product code: W0389

Camshaft lock for Mercedes 2.0, 2.1, 2.2 CDI

A camshaft lock tool for Mercedes 2.0, 2.1, and 2.2 CDI engines is a specialized tool used to lock the camshafts in place during maintenance or repair procedures. These engines are commonly found in various Mercedes-Benz models.

Product code: W0386

The key to unscrewing the nut injector 3.0 HPI

Product code: W0384

Timing lock for Opel EcoFlex 1.0, 1.2, 1.4 16 valve engines (2009 and on)

Timing lock for Opel EcoFlex 1.0, 1.2, 1.4 16 valve engines (2009 and on).

Product code: W0383

The key to rotate the crankshaft VW, Audi 2.4 / 3.2 FSI / 3.0, 4.2, 5.2 TDI Common Rail

This crankshaft turning wrench is specially designed for Volkswagen and Audi vehicles.

Product code: W0381

Puller sleeve rear beam Renault Megane II; Scenic II; Grand Scenic II (oe sleeve 7701479190)

The Puller sleeve rear beam is a specialized tool to assist in the assembly and disassembly of rear beam bushings. This puller is specially designed for Renault Megane II, Scenic II and Grand Scenic II models.

Product code: W0379

Timing lock set for Ford 2.0 EcoBoost SCTi and Ti-VCT, 2010 and on

Timing lock set for Ford 2.0 EcoBoost SCTi and Ti-VCT petrol engines. Manufactured 2010 and onwards.

Product code: W0375

Tool for setting the GMP Volkswagen 2.5 TDI

Product code: W0374

Timing lock for Ford 1.8, Mazda 2.0, 2.3 turbo

Timing lock for Ford 1.8, Mazda 2.0, 2.3 turbo. 2003-2013. Engine codes: CFBA, L3 Turbo, LF(MZR DISI), MZR 2.0(LF).

Product code: W0373

Rear beam sleeve puller Opel Zafira A; Astra G ; Combo ; Meriva A (oe number 402644)

This rear beam sleeve puller is designed to assist installing and removing bushings directly on the vehicle. Built to be compatible with various Opel models, it provides a tight fit and smooth operation, eliminating potential damage to the bushing or vehicle.

Product code: W0371

Puller sleeves left front beam Ford Focus II; III; C-Max; Volvo (no oe sleeves 1695011, 1355621, 1695011,23032, 30666042, FM-FOC

Product code: W0369

Front control arm bushing puller Renault Laguna II, Trafic II

Front control arm bushing puller Renault Laguna II, Trafic II. Renault silent OE: 8200000512.

Product code: W0368

Wrench nut bolt Mercedes ML - W 163 ML ; W 164 ML

Wrench nut bolt specifically designed to fit and loosen/tighten the nut bolts used in various components of the vehicle. These nut bolts can be found in different areas of the ML, such as the suspension, engine, or other mechanical parts.

Product code: W0366

Key injector Volkswagen 24 angle

Product code: W0365

Lock Camshaft Opel 1.6 / 1.7 Diesel

This tool helps to secure the camshafts, thus allowing accurate and safe work in the maintenance or replacement of the timing system.

Product code: W0363

Socket wrench key for Citroen and Peugeot swingarms

Socket wrench key for Citroen Berlingo, C4 and Peugeot 307, 308, 5008 swingarms.

Product code: W0362

Puller for wheel hub / bearing rear swingarm Mercedes Vito Viano 2.2 CDI after 2003

This puller is designed to safely and efficiently separate the wheel hub or bearing from the swingarm assembly.

Product code: W0361

Puller for wheel hub / bearing with and without Abs - Ford Mondeo, Focus, C-Max, Mazda 3, Volvo C30 C70 S40 V50

Product code: W0359

Cam lock Citroen / Peugeot 1.4 16V "ET"

Product code: W0358

Lock camshaft Chrysler 2.8L Diesel after 2007

Lock camshaft Chrysler 2.8L Diesel after 2007

Product code: W0355

Front hub nut wrench for Iveco Daily (2014 and after)

Front hub nut wrench for Iveco Daily (2014 and after).

Product code: W0354

Adapters for mounting and dismounting the front control arm bolts for Renault, Dacia

These adapters work with our universal press tool (W0099 - Universal press for bolts and sleeves). Adapters for mounting and dismounting the front control arm bolts.

Product code: W0353

Rocker Arm Pin puller and press for Renault Scenic II; Grand Scenic II; Megane II; Dacia Logan

It is used for the disassembly and assembly of the wishbone pin at the front bottom of the vehicle.

Product code: W0352

Locking camshaft and water pump Fiat / Opel 2.2 16V chain

This tool kit is suitable for securely fixing the camshaft and removing and installing the water pump on Fiat/Opel 2.2 16V chain-driven engines.

Product code: W0351

7pcs Drive Shaft Puller / Extractor Set

The 7pcs Drive Shaft Puller / Extractor Set is suitable for pulling the half-axle into the wheel hub. In order to be able to carefully and evenly insert the half-axle into the wheel hub, it is necessary to use the appropriate adapters and accessories from the drive-in tool, so that the half-axle goes in securely and straight.

Product code: MG50046

Camshaft lock BMW N43 1.6, 2.0 (B16, B20 - on the chain)

This tool helps to secure the camshafts, thus allowing accurate and safe work in the maintenance or replacement of the timing system.

Product code: W0347

Timing lock for Citroen, Peugeot 1.8, 2.0 16V engines

Timing lock for Peugeot and Citroen gasoline engines 1.8 16V, 2.0 16V and 2.2 16V manufactured starting from 1999.

Product code: W0346

4 adapters to block the timing Renault / Opel / Nissan 1.5; 1.9; 2.0; 2.2 DCI (in box)

The Timing Adapter Set designed specifically for Renault, Opel, and Nissan vehicles with 1.5, 1.9, 2.0, and 2.2 DCI engines. This comprehensive set includes four adapters.

Product code: W0345

Camshaft locking pins for 1.5, 1.9, 2.2, 2.5 DCi engines

A set of 3 timing locking pins for 1.5, 1.9, 2.2, 2.5 DCi engines.

Product code: W0343

Timing locking pin fo Renault, Opel, Nissan 1.9 DCI engines

TDC timing pin used on a variety of diesel and petrol Renault engines.

Product code: W0342

Brake fluid tester

Brake fluid tester is designed to analyze the amount of moisture content within the brake system.

Product code: MG04D7012

Timing locking pin for Renault, Opel, Nissan 1.5 DCI

For locking the crankshaft on Renault 1.5 DCI engines.

Product code: W0341

Cam lock VW 2.5 / 4.9 D / TDI PD - 5-cyl and 10-cyl

Product code: W0340

Cam Lock Alfa Romeo 1.7; 1.8 TBI

Cam Lock Alfa Romeo 1.7; 1.8 TBI is used for locking the camshafts in place during various engine maintenance and repair procedures.

Product code: W0336

Camshaft lock (locking plates) for Renault, Nissan, Opel 2.2, 2.5 dCi

A timing setting tool (setting plates) for Renault, Opel, Nissan 1.5, 1.9, 2.2, 2.5 dCI engines.

Product code: W0335

Timing lock for Ford, Mazda petrol Zetec engines

Camshaft locking bar and 3 pins. For 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V and 1.8 TDI petrol engines.

Product code: W0333

Timing lock for Ford 1.25, 1.4, 1.6 16V engines

Timing lock for Ford 1.25, 1.4, 1.6 16V engines.

Product code: W0332

Puller bushings rear beam Renault Laguna II (to no of original sleeves with flat his back)

Product code: W0329

Lock Flywheel Renault 1.2 / 1.6 Petrol, 1.9 D / TD

Lock Flywheel Renault 1.2 / 1.6 Petrol, 1.9 D / TD is a specialized tool designed to securely lock the flywheel in place during various maintenance and repair tasks. This lock is specifically tailored for Renault vehicles, including models such as Clio, Kangoo, Megane, Twingo, Scenic, Laguna, Express, and Expert, equipped with 1.2, 1.6, 1.9 D / TD engines.

Product code: W0327

Mercedes Benz CDI Diesel Engine Glow Plug Extractor Remover and Repair Kit

Mercedes Benz CDI Diesel Engine Glow Plug Extractor Remover and Repair 3-pieces Kit.1 pc tapered reamer hex:6x10mm, 1pc tapered reamer hex 7x13mm, 1pc glow plug extractor for glow plug threads hex 10x19mm

Product code: MG04A6016

Camshaft lock for Fiat Panda 1.1 Eco and 1.2 engines

Camshaft and crankshaft locking kit for changing the timing belt. Allows you to set the timing in the correct position. Includes camshaft alignment bracket and crankshaft lock.

Product code: W0325

Wrench for the injection pump of diesel Mercedes Benz engines

Key for MRSF-ERE injection pumps found in Benz diesel engines.

Product code: W0324

Flywheel lock for Peugeot and Citroen 1.8, 2.0, 2.2

Flywheel lock for Citroen: C4, C5, Xsara, Picasso, Evasion, Synergie, C8, Jumpy, Dispatch and Peugeot: 206, 307, 406, 607, 806, 807, Expert petrol engines.

Product code: W0323

Camshaft Lock Volkswagen Audi 2.6, 2.8 V6 / V8

Specifically designed for V6 and V8 gasoline engines manufactured between 1991 and 2000. Precise design ensures accurate and reliable control adjustment during critical engine repair and maintenance tasks.

Product code: W0322

Adapter for pulling Denso injectors for Toyota 2.2 170hp engines

Adapter for pulling Denso injectors for Toyota Avensis, Auris, Corolla, Rav 4 2.2 170hp engines. OEM: 23670-0R090.

Product code: W0320

Injection pump lock for Renault , Volvo , Opel 1.9 D/TD (brass)

This injection pump lock tool is made from high-quality brass, ensuring resilience against wear while providing an exact fit during pump securing processes.

Product code: W0319

Camshaft control valve socket for Audi, VW, Seat, Skoda 1.8, 2.0 FSi, TFSI

Camshaft control valve socket for Audi, VW, Seat, Skoda 1.8, 2.0 FSi, TFSI engines.

Product code: W0318

Lock Belt VW / Audi / Seat / Skoda 1.8 FSI / TFSI

A Lock Belt is a special tool used to secure the pulleys of cars during service or repair. Can be used specifically for VW / Audi / Seat / Skoda 1.8 FSI / TFSI models.

Product code: W0317

Injectors puller for Renault, Opel, Nissan, Suzuki 1.9 DCI / CDTI engines

Tool for dismantling and pulling out Renault, Nissan, Opel, Suzuki 1.9 DCI / CDTI injectors.

Product code: W0315

Puller Injectors for Citroen, Peugeot 1.6 HDI engines

This tool is specifically designed for the safe and efficient removal of injectors in Citroen and Peugeot 1.6 HDI engines.

Product code: W0314

Press the upper crossover pins Jeep Cherokee, Grand Cherokee, Wrangler

Product code: W0313

Kingpin adapters for crossovers Jeep - Cherokee, Grand Cherokee, Wrangler

Our set of 4 adapters is designed to simplify the mounting and dismounting of kingpins without the need to remove the steering knuckle.

Product code: W0312

Wheel hub nut socket wrench for Renault

Wheel hub nut socket wrench for Renault Mascott, Midlum, Premium (nut OEM 5010372353).

Product code: W0309

Puller for replacement hydraulic tappets - Opel 8V

Product code: W0307

Puller for wheel hub / bearing VW Polo, Seat, Skoda, Audi A2-puller with ABS and without ABS

This puller is specifically designed to handle wheel hubs and bearings on VW Polo, Seat, Skoda, and Audi A2 vehicles. Whether your vehicle is equipped with ABS or without ABS, this versatile tool ensures a secure grip and effortless removal.

Product code: W0306

Puller for wheel hub / bearing Ford Focus II, C-Max, Volvo, Mazda 3,-puller with ABS and without ABS

Product code: W0305

Pulley puller, universal

Using the tool, the timing wheel can be removed from the shaft quickly and without damage. Its design allows it to be used in many types of cars. Solid metal design. The puller fits well in the wheel, with 8 grooves, the legs can be fixed in several positions.

Product code: MG04A2240

The key to the timing belt tensioner VW, Audi bent

The timing belt tensioner wrench is specially designed to provide a precise fit and ease of use. It allows precise adjustment of the belt tension.

Product code: W0304

The key to lock the crankshaft VW / Audi / Seat / Skoda 1.8 TDI TFSI

Product code: W0303

Camshaft lock for Land Rover / Jaguar Diesel 2.0 Tdi, 2.5 Tds, 2.7 TDV6

This tool helps to secure the camshafts, thus allowing accurate and safe work in the maintenance or replacement of the timing system.

Product code: W0302

Timing lock for Ford, Peugeot, Volvo - 2.0, 2.2 D

Timing lock for Ford and Peugeot 807, 607, 407, Volvo - 2.0, 2.2 D.

Product code: W0300

Cam lock Fiat Bravo / Brava / Marea, Lancia Delta / Debra 1 set. - Petrol 1.8 16V 115 KM (dark green)

Product code: W0299

Timing lock set for Ford diesel and petrol engines

Universal timing lock set for Ford diesel and petrol engines. With 3 interchangeable adapters.

Product code: W0298

Cam lock set for Ford 1.6 Ti-VCT petrol engines

Camshaft, crankshaft, flywheel lock set for Ford 1.6 Ti-VCT petrol engines

Product code: W0297

Diesel engine auxiliary belt tensioning tool for Ford 2.0, 2.2, 2.4 TDDI, TDCI

Belt tensioning tool for Ford 2.0D, 2.2D Di/TDdi/TDCi and 2.4D TDdi engines with chain drive.

Product code: W0296

Cam lock for Fiat, Alfa Romeo, Lancia 1.4 MultiAir

Camshaft lock for Fiat, Alfa Romeo, Lancia 1.4 MultiAir engines.

Product code: W0295

Diesel glow plug socket set 3/8", 4pcs

This set includes four sockets, each with a 3/8" drive size, specifically designed to fit and remove diesel glow plugs.

Product code: MG96446

Cam lock Ford, Peugeot, Fiat 2.2 TDCi, JTD, HDI chain (Ford engine 120HP)

This cam lock is compatible with various models, including Peugeot/Citroen HDi, Fiat Ducato JTD, and Ford Transit TDCi.

Product code: W0294

Cam lock VW, Seat, Skoda and Audi 1.2 TSI, TFSI engines

Cam lock tool for VW, Skoda, Seat, Audi 1.2 TSI chain driven petrol engines.

Product code: W0292

Key variator Volkswagen

On Volkswagen vehicles, the variator key (CVT variator tool) is a special tool used to disassemble or maintain the continuously variable transmission (CVT) variator. The variator key helps to disassemble and assemble the variator unit, which is responsible for the operation of the transmission.

Product code: W0290

Camshaft lock VW, Audi, Seat, Skoda 1.4, 1.6 FSI

Camshaft lock VW, Audi, Seat, Skoda 1.4, 1.6 FSI. Engine codes: ARR, AVY.

Product code: W0287

Camshaft locking set Peugeot Citroen 2.7 HDI V6

Camshaft locking set Peugeot Citroen 2.7 HDI V6.

Product code: W0284

Timing lock set for 1.4 FSI and TFSI, 1.6 FSI engines with timing chain

Camshaft lock set for 1.4 FSI and TFSI, 1.6 FSI engines with timing chain. For VW, Audi, Skoda, Seat engines.

Product code: W0283

Bushing injection pump BMW Common-Rail 2.0d N47 / N47S (06-10)

When disassembling or assembling the pump, it preserves the position of the gear wheel.

Product code: W0282

Adapter for Opel, Fiat, Alfa Romeo 1.9 JTD injector pulling

Adapter for Opel, Fiat, Alfa Romeo 1.9 JTD injector pulling.

Product code: W0281

Engine timing tool set for Ford, Fiat, Iveco, Citroen, Peugeot 2.2 engines

Engine timing tool set for Ford, Fiat, Iveco, Citroen, Peugeot 2.2 engines.

Product code: W0280

Tool for setting the oil pump Ducato, Iveco, Citroen Jumper - 2.3 Diesel Common Rail

Efficiently set the oil pump on Ducato, Iveco, Citroen Jumper 2.3 Diesel Common Rail engines with this reliable, easy-to-use tool designed for accurate alignment and optimal performance.

Product code: W0278

Cam lock Fiat Brava / Bravo / Marea 2.0 20V - petrol (pink)

Product code: W0277

Timing tool set Volkswagen Touareg, Phaeton 5.0 V10 TDI

Timing tool set Volkswagen Touareg, Phaeton 5.0 V10 TDI

Product code: W0276

The key to lock the crankshaft Volkswagen Audi Skoda 1.4-1.6 16V petrol

This tool is designed to fit into the engine's timing components and secure the crankshaft in place during procedures such as timing belt replacement or engine timing adjustment.

Product code: W0275

Puller injection pump sprocket Renault 1.9 D / TD / Volvo / Opel

This is a special tool used to remove the injection pump sprocket on Renault 1.9 D and TD engines and Volvo and Opel vehicles. This tool allows the injection pump sprocket to be safely and efficiently removed from the engine for maintenance or service.

Product code: W0274

Timing tool set Fiat Coupe/Barchetta, Lancia, Alfa 1.8 16V (Grey)

This tool is used to fix the engine control system during maintenance or repair work. This is an especially important tool when replacing a timing chain or timing belt, when correct timing is critical to engine performance and operation.

Product code: W0272

Timing tool set Lancia Kappa 5 cyl. 2.0 20v (Silver)

Timing tool set Lancia Kappa 5 cyl. 2.0 20v (Silver)

Product code: W0271

Timing tool for Audi, VW 3.3, 3.7, 4.2 A6 A8

Timing tool for Audi, VW 3.3, 3.7, 4.2 A6 A8.

Product code: W0270

Timing tool set Audi VW Skoda Seat 2.4, 2.7, 2.8, 3.0 V6 30V

Timing tool set Audi VW Skoda Seat 2.4, 2.7, 2.8, 3.0 V6 30V

Product code: W0269

Timing tool set Audi 3.6 / 4.2 V8

This comprehensive tool set is specifically designed to precise timing adjustments for Audi vehicles equipped with 3.6 and 4.2 V8 engines.

Product code: W0268

Timing tool set Opel Vectra C 2.8 V6 timing chain, petrol

This Timing tool set helps secure the engine timing chain, allowing you to work safely and accurately when maintaining or replacing the timing system.

Product code: W0266

Air conditioning clutch wrench, 28-29mm

Designed for securely locking the air conditioning clutch, ensuring reliable maintenance and repairs on vehicle AC systems. With it's size allowing for a versatile fit across various air conditioning clutches.

Product code: W0265