The key to unscrew the rear axle nuts Mercedes Sprinter W901 and W905
Product code: W0598
Product description
This specialized key is designed for unscrewing the rear axle nuts on Mercedes Sprinter W901 and W905 models. It is specifically crafted to fit nut 902 357 01 26 (B.9207) and is compatible with engine codes 741.407, 741.408, and 741.409. The tool ensures a precise fit, allowing for easy and safe removal or tightening of the rear axle nuts during maintenance or repair. Built from high-quality materials.
Application
- Mercedes Sprinter W901 and W905 models
- Engine codes: 741.407, 741.408, 741.409
- Fits nut 902 357 01 26 (B.9207)
Product packing
| Pack number | Dimensions | Weight |
|---|---|---|
| 1 | 0 x 0 x 0 cm | 0.4 kg |
Delivery fee
| Delivery method | Gross price |
|---|---|
| Pickup in Nagytarcsa | 0,00 € |
| Pickup in Debrecen | 0,00 € |
| DHL Worldwide Express | 61,67 € |
More products in this category
Sleeve, bearing and silent press kit, 27pcs
Inside diameters from 34-80mm in 2mm steps, outside diameters from 44-80mm in 2mm steps, pulling spindles with nuts.
Product code: DK-230581A
Wheel Bearing tool VW
Bearing installation and removal tool for 85mm bearings. Application Volkswagen Touareg, Transporter, Multivan & T5
Product code: MG50432A
CV boot band pliers
For stainless steel CV boot bands. Also for bands, where special torque has to be used, Volkswagen, Audi, Opel, Ford
Product code: MG50111
CV Boot Clamp Pliers, 184mm
CV Boot Clamp Pliers, 184mm 1/2" holes on the handles can be used as keys.
Product code: MG50110
Universal silent block removing and installing kit, 34-84mm
Spindle: M10xP1.5, M12xP1.75, M14xP2.0, M16xP2.0, length/Ø A 44/34, 46/36, 54/44, 56/46, 58/48, 66/56, 68/58, 70/60, 78/68, 80/70, 84/72, B 48/38, 50/40, 52/42, 60/50, 62/52, 64/54, 72/62, 74/64, 76/66mm
Product code: MG50093
7pcs Drive Shaft Puller / Extractor Set
The 7pcs Drive Shaft Puller / Extractor Set is suitable for pulling the half-axle into the wheel hub. In order to be able to carefully and evenly insert the half-axle into the wheel hub, it is necessary to use the appropriate adapters and accessories from the drive-in tool, so that the half-axle goes in securely and straight.
Product code: MG50046
Ball joint separator set, 5pcs
Ball joint separator set, 5pcs ideal for assembling and disassembling wishbones,, ball joints, socket joints, tir rods and individual gimbal joints.
Product code: MG04B3051
Adjustable Steering Rod Wrench, 1/2", 25-55mm
The 1/2" Drive Steering Rack Wrench is used to loosen or tighten the bolts and nuts that secure the steering rack to the vehicle's chassis. The tool is designed with a 1/2" drive socket that allows it to fit over the nuts and bolts with ease. The wrench is typically adjustable, allowing it to fit various sizes of nuts and bolts.
Product code: MG04B3042
Ball joint separator 39mm
Steering rods, stabilizers, etc. designed to remove ball-jointed rotating parts.
Product code: MG04B3022D
Ball joint separator 18mm
Steering rods, stabilizers, etc. designed to remove ball-jointed rotating parts.
Product code: MG04B3022A
Ball joint separator 19-22mm
Steering rods, stabilizers, etc. designed to remove ball-jointed rotating parts.
Product code: MG04B3022
Pneumatic CV joint boot install tool
This pneumatic CV joint boot install tool makes installation fast and easy. It prevents boot damage and ensures a tight fit. Simply adjust the air control switch and place over the CV joint. Lubricate before use. Working pressure: 5-9bar. Perfect for auto mechanics!
Product code: MG04B1085
CV Boot Tool
CV Boot Tool is allows the convenient and efficient installation of rubber bells on the half-axle of the vehicle.
Product code: MG04B1099
Cv boot clamp tool with cutter
Cv boot clamp tool with cutter is suitable for installing and tightening tape-type clamps. It has a built-in cutter for cutting tape. With the built-in cutting and winding mechanism, the tape can be pulled and cut quickly and efficiently.
Product code: MG04B1008
Wheel hub socket wrench set, 8 pcs
This set is specially designed for loosening and tightening nuts drilled into the upper part.
Product code: MG04A2268D
Wrenches for unscrewing / fixing shock absorbers (4 types )
The wrenches for unscrewing and fixing shock absorbers are specialized tools designed for specific applications. They are made of hardened and higher-grade materials to withstand the forces and torque required for working with shock absorbers. The wrenches are categorized by the size of the hexagon, and each size is suited for different car makes and models.
Product code: W0549
Front Sledge Bush Puller for MERCEDES ML W163
The front sledge bush puller is specifically designed for Mercedes ML W163 models, suitable for the removal and installation of front suspension bushings. This tool allows for efficient work directly on the vehicle, simplifying and speeding up the maintenance process.
Product code: W0428
Puller sleeve back beam (middle) BMW 5 (E 60, E61) BMW 6 (E63, E64) (oem 33176770825)
This tool allows easy and safe removal of the center silencer from the rear beam without disassembling other components or the entire beam system.
Product code: W0520
Rear control arm bushing puller for BMW
Rear control arm bushing puller for BMW E60, E61, E63, E64, E65, E53.
Product code: W0376
Bushing puller, Citroen C5
Silent puller, Citroen C5 (sleeve OE no. 352384)
Product code: W0196
Rear beam bushing puller BMW E32 / E34 (nr. oe 3331112670)
When working on a BMW 5 Sedan (E34), BMW 5 Touring (E34) or BMW 7 (E32), the rear suspension bushing puller makes it easy to remove the bushings from the suspension. This tool provides the proper grip and power transfer to easily and safely remove bushings from the suspension.
Product code: W0181
Clamp 15-45mm
This tool is designed to hold, clamp or encircle one or more objects, e.g., cables or pipes.
Product code: JBM11891
CV joint boot clamp pliers
CV joint boot clamp pliers. Holes of 1/2" on the handles to use as keys. Opening: 0-20mm.
Product code: JBM52619
Ball joint and silent block remover/installer set
Suitable for any passenger car, utility trucks and SUV vehicles, in which the ball joints have an interference fit. The tools allow for easy removal and installing without large-scale demounting.
Product code: MG50042
Ball joint separator tool set, replaceable heads, 20, 22, 24, 27, 30mm
The Ball Joint Separator Tool Set designed to facilitate the easy and safe removal of ball joints from vehicles. This set is particularly valuable due to its versatility and efficiency in handling different sizes of ball joints, which is achieved through its set of replaceable heads and adjustable features.
Product code: MG50436
Ball joint removal set, 5pcs
Designed for easy removal of most popular types of pitman arms, tie rods and ball joints. Operation range: 17, 19, 21, 23, 27mm
Product code: DK-230506
Tool for hub removal (set of 15 screws)
Tool for hub removal – cars of A, B, C class and others. Set of 15 screws.
Product code: W0072
Rear beam bushing puller for BMW X5 E53
Rear beam bushing puller (No. oe 33 17 6 770 456) for BMW X5 E53
Product code: W0246
Puller sleeves for the left front beam Ford Focus II; III; C-Max; Volvo
Puller sleeves for the left front beam in Ford Focus II, III, C-Max, and Volvo S40 II, V50. For mounting and removing bushings directly on the car. Compatible with OE bushings: FM-FOC4, 1695011, 1355621, 23032, 30666042.
Product code: W0369
Puller for wheel hub / bearing Ford Focus II, C-Max, Volvo, Mazda 3,-puller with ABS and without ABS
This tool is designed for the assembly and disassembly of wheel hubs and bearings on the car, compatible with both ABS and non-ABS systems.
Product code: W0305
Rear beam bushing puller for Renault Laguna II (for non-factory bushings with flat back)
This rear beam bushing puller is designed specifically for Renault Laguna II, making the removal of non-factory bushings with a flat back efficient and safe.
Product code: W0329
Front control arm bush puller Renault Laguna II; Espace IV ( nr oe 8200002868; FE22821 )
This tool is used for mounting and dismounting the bushing.
Product code: W0334
Puller for wheel hub / bearing with and without Abs - Ford Mondeo, Focus, C-Max, Mazda 3, Volvo C30 C70 S40 V50
The wheel hub/bearing puller allows you to install and remove the hub/bearing on the car without removing the ABS sensor.
Product code: W0359
Rear axle silent puller
The rear axle silent puller is a special tool used to remove and install the metal-rubber bushings in the rear suspension of vehicles on various Honda and Rover models (Honda Civic, CR-V, Concerto, CRX, Rover 200).
Product code: W0485
Hub and Bearing Puller for Fiat Ducato and Citroen Jumper
This hub and bearing puller is specifically designed for Fiat Ducato and Citroen Jumper vehicles, allowing for the quick and efficient mounting and dismounting of hubs and bearings on the vehicle without the need to disassemble the suspension.
Product code: W0499
Universal silent and bearing puller kit, 24pcs
This professional tool set is designed for the removal and installation of bushings, silent bearings, hydraulic bearings and seals, etc.
Product code: DK-230581
Axle nut socket set, 9pcs
Axle nut socket set, 9pcs is a special set of tools required for tightening and loosening vehicle axle nuts. These types of nuts are usually large and overtightened and require special wrenches to fit their size and shape.
Product code: MG04B1015
Universal silent block remover/installer set, 34-72mm, 44-82mm
Our universal silent block remover/installer set makes extracting and installing silent blocks, hydraulic bearings, and more a breeze! With spindles and press adapters in various sizes, this set is perfect for any job.
Product code: MG50605
Wheel bearing removal/installing tool set
For the VAG group, wheel hub size 72mm, Audi A2, Skoda Fabia after 2000, VW Polo, Fox after 2005, Seat Ibiza after 2002.
Product code: MG50432
Front wheel drive kit, 55.5-91mm, axle 380mm
Sizes(d) 55.5, 59, 62, 65, 66, 71.5, 73, 78, 84, 86, 91mm, axle 380mm
Product code: MG50405
Axial joint puller 28-35mm
Suitable for quick and easy removal/installation of the steering knuckle. Clamping size 28-35mm, length 400mm, hexagon end 27mm (1/2"DR)
Product code: MG50045A
Axial joint puller 35-45mm
Suitable for quick and easy removal/installation of the steering knuckle. Clamping size 35-45mm, length 400mm, hexagon end 27mm (1/2"DR)
Product code: MG50045
Hydraulic wheel hub puller 10T
Hydraulic wheel hub puller 10T
Product code: MG04B1044B
Pneumatic CV boot installation tool (8bar)
The CV boot installation tool is to be used solely for the stretching of flexible CV boots onto drive-shaft assemblies of automotive vehicles.
Product code: JBM52994
Wheel bearing removal/installation tool set 55.7-88.4mm
Diminishes the possibility of wheel bearing damage during removal and installation. Sizes (d) 55.7, 63.3, 67.8, 70.7, 71.9, 71.7, 72.8, 73.4, 74.7, 77.4, 81.4, 83.3, 88.4mm.
Product code: JBM52551
Universal press and pull sleeve kit, 34-82mm
Spindle: M10, M12, M14, M16, M18, Adapters (Outer/inner diameter): 74/54mm, 76/56mm, 78/58mm, 72/52mm, 70/50mm, 68/48mm, 80/60mm, 82/62mm, 66/46mm, 64/44mm
Product code: JBM52494
Clamp 50-125mm
This tool is designed to hold, clamp or encircle one or more objects, e.g., cables or pipes.
Product code: JBM11890
Press for bushings and silents for hydraulic cylinder 12T
Press for pins and bushings without adapters. Can be used with a hydraulic cylinder.
Product code: C02/0149
Adapter set for bushings of swingarm pins for VW T4, LT, Crafter, Mercedes Sprinter
Adapter set for bushings of swingarm pins for VW T4, LT, Crafter, Mercedes Sprinter
Product code: C02/0146
Silent remover and installer press with adapters for Movano, Master, Nissan
Press with bushing sleeves for the top link of the swingarm of Opel Movano, Renault Master, Nissan Interstar. Universal press for extruding and pressing pins, metal-rubber sleeves, ball pins and many elements that are within the dimensions of the press.
Product code: C02/0145
Bushing and silent puller adapter set for VW T4, LT, Sprinter, Movano, Master
Bushing and silent puller adapter set for VW T4, VW LT, Mercedes Sprinter, Opel Movano, Renault Master.
Product code: C02/0141
Hydraulic cylinder press for silents 12T
Press for extruding bolts and ball joints with a 12 ton press capacity.
Product code: C02/0136
Universal press for extracting and pressing pins and silents
Its main purpose is the disassembly and assembly of silents in the suspension. Adapters not included.
Product code: C02/0135
Suspension bushing puller, Opel Vectra B, BMW E36
Ideal for the removal and refitting of the suspension bushes without removing the trailing arm assembly from the vehicle.
Product code: W0001
Puller for suspension arm bushings, Cinquecento, Seicento
Puller for suspension arm silent blocks, Cinquecento, Seicento
Product code: W0004
Puller for plastic sleeves, Skoda Fabia, VW Polo
Puller for plastic sleeves, Skoda Fabia, VW Polo.
Product code: W0005
Sleeve puller, Golf IV, Audi A3, Skoda Octavia
Sleeve puller, Golf IV, Audi A3, Skoda Octavia
Product code: W0006
Puller for double-row wheel hub bearings
Puller for double-row wheel hub bearings. Mechanical kit to facilitate work with double-row front and rear axle bearings. The purpose of the puller is to safely remove this type of bearing from the wheel hub.
Product code: W0037
Adapters for press, puller for bolts, Renault Master, Opel Movano
Adapters for press, puller for bolts, Renault Master, Opel Movano. It cooperate with W0027 and W0045 presses.
Product code: W0046
Rear suspension bushing tool Renault Laguna II
Rear suspension bushing tool Renault Laguna II
Product code: W0047
Front arm bushing puller BMW E39
The Front Arm Bushing Puller BMW E39 is a tool designed to remove the front arm bushing from the BMW E39 model.
Product code: W0057
Bushing puller for BMW E36, Z3, E46 rear suspension arms
Bushing puller for BMW E36, Z3, E46 rear suspension arms.
Product code: W0083
Puller for suspension arm sleeves – front, BMW E 39 M5
This suspension arm sleeves puller is specially designed for BMW E39 535i ;540i M5 ; BMW 7 E38 models. The tool helps technicians to remove the suspension bushing easily and safely without damaging surrounding parts or the bushing.
Product code: W0086
Sleeve puller, rear beams, BMW E39 sedan
The sleeve puller is used to remove and install the rear axle bushing.
Product code: W0096
Adapters for press, puller for bolts, Master, Movano, Interstar
Adapters for press, puller for bolts, Renault Master, Opel Movano, Nissan Interstar
Product code: W0098
Universal press for bolts and sleeves
Universal, strengthened press for bolts and sleeves of trailing arms.
Product code: W0099
Press, puller for bolts of suspension arms Opel, Renault, Nissan
Press, puller for upper and lower ball bolts of the suspension arms in Master, Movano, Interstar.
Product code: W0100
Puller screw, M12, 250mm
Screw for bushing and sleeve pullers, M12, 250mm.
Product code: W0101
Adapters for press, puller for bolts, Master, Movano, Interstar
Adapters for press, puller for bolts, Renault Master, Opel Movano, Nissan Interstar
Product code: W0102
Sleeve puller, rear beams FIAT Panda 2003-
Suitable for disassembling and assembling the bushings on the car for FIAT Panda models after 2003.
Product code: W0107
Puller for rear beam sleeve, Ford Fiesta, Ka
Puller for rear beam sleeve is a specialized tool designed for Ford Fiesta and Ka models. This puller is an essential accessory for removing the rear beam sleeve, facilitating efficient and precise maintenance or replacement procedures.
Product code: W0114
Puller for rear beam sleeve, BMW E39 touring
The tool precisely fits the rear suspension bushings of the BMW E39 Touring and can be used to easily remove and install the bushings without damaging the components.
Product code: W0113
Press for dismantling and mounting of lower bolts, IVECO
Press for dismantling and mounting of lower bolts, IVECO
Product code: W0115
Set of adapters for dismantling and mounting of lower bolts, IVECO
The adapter kit is precisely engineered and durable, and allows reliable and efficient removal and installation of lower suspension bolts. Designed to IVECO vehicle specifications to fit perfectly with the lower suspension bolts and allow smooth and safe operations.
Product code: W0116
Puller to the hub / bearings VW T5
Puller to the hub / bearings VW T5
Product code: W0129
Press, puller for bolts (W0027, W0102, W0116), Mercedes, VW, Opel etc.
Press, puller for bolts (W0027, W0102, W0116), Mercedes, VW, Opel etc.
Product code: W0133
Sleeve puller for control arm rear axles for Fiat, Opel, Saab
Sleeve puller for control arm rear axles for Fiat, Opel, Saab
Product code: W0142
Sleeve puller, rear beams Mercedes Benz S Class W / V 220 and C215 CL
The bushing puller is used to remove and install the rear axle bushing.
Product code: W0157
Press, puller for bolts Renault Master / Opel Movano
Press, puller for bolts Renault Master / Opel Movano + W0160 adapter
Product code: W0161
Press and puller for ball joints Renault, Opel, Iveco, VW, Nissan, Mercedes etc., 20 adapters
Universal press and puller for ball joints Renault, Opel, Iveco, VW, Nissan, Mercedes etc., with 20 adapters. For models manufactured in 2006 and on.
Product code: W0162
Hub Puller VW, Seat, Skoda-Puller with ABS and without ABS
The tool is suitable for removing the wheel hubs of both vehicles with and without ABS. Therefore, it can be widely used when servicing VW, Seat and Skoda models. The tool fits exactly on the hub and provides the right grip to pull the hub off efficiently and safely.
Product code: W0163
Upper control arm central bolt puller for VW, Audi after 2005
Upper control arm central bolt puller for VW, Audi after 2005.
Product code: W0164
Universal puller small metal-rubber sleeve
Universal puller small metal-rubber sleeve. It is a perfect and ideal tool for effective and safe bushing removal.
Product code: W0167
Steering rod wrench
Allows the inner tie rod to be removed and installed without removing the rack.
Product code: W0168
Puller arm forward bushing Renault Laguna I
Puller arm forward bushing Renault Laguna I (nr. oe 77 00 824 042)
Product code: W0171
Sleeve puller, Golf IV, Audi A3, Skoda Octavia for the sleeve FEBI
Sleeve Puller designed specifically for Golf IV, Audi A3, and Skoda Octavia vehicles, compatible with FEBI sleeves. Ensures a precise and secure grip for effective removal.
Product code: W0172
Control arm bushing puller lower front Opel Astra G, H, Zafira, Vectra B
The control arm bushing puller for the lower front of Opel Astra G, Astra H, Zafira, and Vectra B is a specialized tool used to remove the control arm bushings in the front suspension of these vehicles.
Product code: W0190
Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot
Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot
Product code: W0195
Puller arm bushings front / rear, SEAT Leon, Toledo II, Skoda Octavia, VW Bora, Golf IV
The bushing puller is a tool for removing front and rear wheel hub bushings for SEAT Leon, Toledo II, Skoda Octavia and VW Bora, Golf IV models.
Product code: W0231
Puller arm bushings rear axle Ford Galaxy, Seat Alhambra, VW Sharan
Puller arm bushings rear axle Ford Galaxy, Seat Alhambra, VW Sharan (oe VW 7M0 407 181 A)
Product code: W0233
Rear transverse upper control arm bushing puller (crescent / banana)
This tool allows for the mounting and dismounting of bushings on a car or with a hydraulic press.
Product code: W0254
Puller for wheel hub / bearing VW Polo, Seat, Skoda, Audi A2-puller with ABS and without ABS
This puller is specifically designed to handle wheel hubs and bearings on VW Polo, Seat, Skoda, and Audi A2 vehicles. Whether your vehicle is equipped with ABS or without ABS, this versatile tool ensures a secure grip and effortless removal.
Product code: W0306
Adapters for mounting and dismounting the front control arm bolts for Renault, Dacia
These adapters work with our universal press tool (W0099 - Universal press for bolts and sleeves). Adapters for mounting and dismounting the front control arm bolts.
Product code: W0353
Rear beam sleeve puller Opel Zafira A; Astra G ; Combo ; Meriva A (oe number 402644)
This rear beam sleeve puller is designed to assist installing and removing bushings directly on the vehicle. Built to be compatible with various Opel models, it provides a tight fit and smooth operation, eliminating potential damage to the bushing or vehicle.
Product code: W0371
Puller sleeve rear beam Renault Megane II; Scenic II; Grand Scenic II (oe sleeve 7701479190)
The Puller sleeve rear beam is a specialized tool to assist in the assembly and disassembly of rear beam bushings. This puller is specially designed for Renault Megane II, Scenic II and Grand Scenic II models.
Product code: W0379
Adapters to bolts down Jeep - Cherokee, Grand Cherokee, Wrangler
Product code: W0398
Lower kingpin puller for Jeep Cherokee, Grand Cherokee, Wrangler
This lower kingpin puller is designed for the knuckle pin assembly and disassembly, specifically for use on the car's bottom. It ensures efficient and safe operations for Jeep models.
Product code: W0399
Press the king pins the upper and lower Jeep - Cherokee, Grand Cherokee, Wrangler
The tool is used to remove and install the kingpins in the steering knuckle assembly. Use the king pin press tool to press out the king pin from the steering knuckle. The tool will apply force to push the pin out of its housing. Once the king pin is pressed out, you can inspect it for wear or damage and replace it if necessary.
Product code: W0401
Puller sleeves of rear beam / bridge Mercedes W210, W202, W203, W140 (OE 129 351 21 42)
The bushing puller is used to remove and install the rear axle bushing.
Product code: W0424
Puller of bushings of the front control arm Volkswagen T4
The puller is used to install and remove control arm bushings on the car.
Product code: W0427
Power steering pump puller
This tool facilitates the safe removal of the power steering pump.
Product code: W0430
Rear beam bushing puller for Mercedes S-Class (W220) CL-Class (C215)
The rear beam bushing puller is a specialized tool designed to remove the rear beam bushings from Mercedes-Benz S-Class (W220) and CL-Class (C215) vehicles. The rear beam bushings are essential components of the rear suspension system, and they help provide stability and control to the rear axle assembly.
Product code: W0453
Ball joint socket wrench for Renault Master III, Opel Movano B
Ball joint socket wrench for Renault Master III, Opel Movano B.
Product code: W0469
Puller sleeve rear beam Front Bmw Series 5,6,7 / F 10, F11, F12, 13, F01 (33316790573, 33 31 6 775 780)
This tool is a great help in installing and removing the bushing. Puller sleeve rear beam is a high quality tool specially designed for Bmw Series 5,6,7 / F 10, F11, F12, 13, F01 models. This tool fits the vehicle perfectly and guarantees perfect operation and durability.
Product code: W0488
Rear beam sleeve puller, Bmw Series 5,6,7 / F 10, F11, F12, 13, F01 (33 31 6775792, 33 31 6 793 864)
This puller helps you safely and efficiently remove the bushings that attach to the rear axle. The purpose of the tool is accurate and powerful removal, minimizing the risk of injury and facilitating service work.
Product code: W0490
Puller hub bearing the brake disc Ford Transit
The puller hub bearing the brake disc is a special tool used for mounting and dismounting brake disc bearings on Ford Transit vehicles.
Product code: W0500
Puller sleeve the arm forward (lower) L / R BMW X5 (E70) X6 (E71, E72), 3.0-4.8 (oe sleeve 31106778015)
The tool is used to remove and install the bushing sleeve without the need to disassemble the entire suspension system or remove the swing arm from the vehicle. It helps save time and effort during maintenance or repair procedures related to the front lower swing arm bushings.
Product code: W0501
Puller hub / bearing Mondeo IV; Focus II RS (FORD 1 463 833)
This tool is designed for the assembly and disassembly of the front hub and bearing on Ford Mondeo IV and Focus II RS vehicles.
Product code: W0506
Silent puller for VW, Audi, Seat, Skoda engines and gearboxes
Allows the replacement of engine and gearbox silent blocks in VAG engines.
Product code: W0521
Rear bushing puller for Opel Corsa B, C, Tigra
Rear silent puller for Opel Corsa B, C, Tigra. Opel OEM: 24443815, 5402636.
Product code: W0539
Bushing puller and press for Fiat, Opel rear arms
Silent puller and press for Fiat Doblo (2009 and on) rear arms.
Product code: W0658
Puller for rear steering knuckle bushing for KIA and Hyundai
Rear steering knuckle silent puller for KIA, Hyundai.
Product code: W0667
Rear control arm bushing puller Hyundai, Kia
The rear control arm bushing puller Hyundai, Kia is a special tool used to install and remove rear steering linkage bushings on Hyundai and Kia vehicles. Rear steering link bushings are components that are found in the steering system and are important for stable steering and control of the vehicle.
Product code: W0668
Rocker Arm Pin puller and press for Renault Scenic II, Clio III;
It is used for the disassembly and assembly of the wishbone pin at the front bottom of the vehicle.
Product code: W0670
Rear control arm bushing puller Ford, Volvo
Rear control arm bushing press and puller for Ford and Volvo. Puller and press tool for rear trailing arm bushes. The tool is used to assemble and disassemble bushings without the need to dismantle the swing arm. Threads should be lubricated with grease before use.
Product code: W0671
Press for disassembly and assembly, bolts Ford Transit VI MK6
This press tool is a special tool used to disassemble and reassemble the kingpin of a Ford Transit VI (MK6) type vehicle.
Product code: W0681
Rear beam bushing puller Ford Fiesta V, MK5; Fusion; Mazda 2 (Febi 27245; Ford 1 426 699)
The Rear Beam Bushing Puller is a specialized tool designed for the assembly and disassembly of rear beam bushings in Ford Fiesta V (MK5), Fusion, and Mazda 2 vehicles. This tool is specifically engineered to simplify the process of removing and installing rear beam bushings.
Product code: W0705
The wrench for the side pressing nut of the Mercedes steering rack
This tool is ideal for professionals and DIY enthusiasts alike, this tool ensures seamless installation, removal, and adjustment of the steering gear side pressure nut.
Product code: W0728
Rear bearing hub puller, Citroen; Peugeot ; Toyota ; Opel after 2016
This tool is designed for the removal and installation of wheel bearings, especially on specific vehicles models after 2016. The design eliminates the need to remove the steering knuckle and ABS sensor and simplifies the repair process.
Product code: W0736
Rear axle bushing press for Toyota Yaris, Passo, Echo
The Rear Axle Bushing Press is designed to facilitate the installation or replacement of rear axle bushings in Toyota Yaris, Passo, and Echo models. Rear axle bushing press for Toyota Yaris, Passo, Echo. Bushing
Product code: W0720
Ball joint service set
This Ball Joint Service Set is an essential toolkit for automotive professionals focusing on the removal and installation of press-fit parts. Designed for versatility and efficiency, this set is perfect for working with ball joints, universal joints, and truck brake anchor pins.
Product code: MG99028
Front bearing hub extractor for VW Lupo, Audi A2 1.2 TDI
This Front Bearing Hub Extractor is a specialized automotive tool designed to facilitate the installation and removal of the front bearing hub on specific vehicle models, particularly the VW Lupo and Audi A2 with 1.2 TDI engines. This tool is engineered to make the process more efficient and to minimize the risk of damage to critical components such as the ABS sensor.
Product code: W0740
Front sled bushing puller Renault Laguna II, Trafic II
This is a tool used to remove the bushings in the front suspension of Renault Laguna II and Renault Trafic II cars.
Product code: W0368
Inner tie rod master tool kit with 12 adaptors
Inner tie rod master tool kit with 12 adaptors. Long socket and crowfoot design for easy removal and installation without removing the rack. Includes crowsfeet sizes from 29mm to 42mm and 1-3/16" to 1-1/2".
Product code: MG91049
Sleeve puller, rear beams, Fiat Punto
Sleeve puller for rear beams on Fiat Punto, designed to replace bushings. Can be used universally on a car or with a hydraulic press.
Product code: W0058
Rear Suspension Bush Puller Ford Mondeo
Rear beam bushing puller for Ford Mondeo, designed to press in and remove bushings without disassembling the swingarm.
Product code: W0020
Universal sliding hammer hub puller, with 15 screws
Universal sliding hammer hub puller with 15 screws, ideal for removing seized hubs. The tool weighs 13kg and comes with three types of 5 screws for various applications. Size range: 90mm-155mm (±5mm), with an external flange dimension of 185mm.
Product code: W0002
Puller arm forward bushing Renault Laguna I (under a hydraulic press)
Puller arm forward bushing Renault Laguna I (under a hydraulic press) (nr. oe 77 00 822 503)
Product code: W0170
Double-row bearing puller and wheel hubs II version (BMW, Mercedes etc.)
Double-row bearing puller and wheel hubs II version (BMW, Mercedes etc.)
Product code: W0205
Front control arm bush puller Renault Laguna, Espace, Trafic, Opel Vivaro
Front control arm bush puller for Renault Laguna, Espace, Trafic, and Opel Vivaro. Compatible with OE bushings No. 82 00 002 869. Ideal for bushing removal and installation.
Product code: W0326
Front control arm bushing puller Renault Clio II; Renault kangoo I; Thalia I (7700424399 )
Front control arm bushing puller for Renault Clio II, Kangoo I, and Thalia I. Suitable for mounting and dismounting both bushings in the swingarm.
Product code: W0337
Puller sleeves for the right front beam Ford Focus II; III; C-Max; Volvo S40II, V50
Puller Sleeves for Right Front Beam – Ford Focus, C-Max, and Volvo. These puller sleeves are designed for mounting and dismounting bushings on various models of Ford and Volvo vehicles, ensuring precise and efficient maintenance. Compatible with several Ford Focus and Volvo models from 2003 onwards.
Product code: W0370
Steering readout scale, 270-350mm
This Steering wheel level is a specialized tool designed to assist in the accurate leveling of a vehicle's steering wheel before it is locked into position. This step is crucial prior to checking or adjusting the front wheel alignment.
Product code: MG99230
Steering rack knuckle tool set, 30-45mm
This steering rack knuckle tool set makes removing and installing steering knuckles fast and easy. With interchangeable heads to fit racks with hex drive, two flats, and round ends from 30-45mm, it's versatile and effective. Drive: 32mm Hex, 1/2" square.
Product code: MG50423
Axial joint tool, 27-42mm
Axial joint tool, 27-42mm can be used to remove and attach the axial joints.
Product code: MG50444
Axial joint tool, 33-42mm
High-quality axle joint installation tool, specially designed for quick and efficient removal and installation of vehicle axle joints. Thanks to its 1/2" drive, the tool is easy to use with many manual and pneumatic wrench systems.
Product code: MG50443
Wishbone lever tool
Wishbone lever tool, Length: 1180mm, Tube: Ø 3.5cm, Brace distance: 50 - 45 - 40 - 35 - 30cm, Fastening support: 15 x 13cm
Product code: JBM51902
Wishbone lever tool, sliding type, lockable at 5 points
The device helps to ensure that the swingarms are stably and securely fixed, only they are maintained or installed.
Product code: MG50417
Puller for front control arm pins of Renault Master, Opel Movano
Puller for front control arm pins of Renault Master, Opel Movano
Product code: W0045
Adapter for mounting pin BMW 3 and Z 3 (BMW E36) BMW 31126758510
The Adapter for Mounting Pin BMW 3 and Z3 is a specialized tool designed to facilitate the precise installation or pressing of pins in BMW 3 Series and Z3 models. This adapter is specifically designed to work with a hydraulic or manual press, ensuring a secure and accurate pin installation process.
Product code: W0707
Socket wrench key for Citroen and Peugeot swingarms
Socket wrench key for Citroen Berlingo, C4 and Peugeot 307, 308, 5008 swingarms.
Product code: W0362
Steering Knuckle Nut Wrench for Mercedes Actros, Axor, Antos, Arocs
This wrench is designed for unscrewing the steering knuckle nut of specific Mercedes trucks. It offers a precise fit and is compatible with both OEM and certain aftermarket parts.
Product code: W0735
Rocker Arm Nut Wrench for Iveco Daily 2006 E4
This tool is specifically tailored to unscrew the nut of the rocker arm.
Product code: W0734
Wheel hub nut socket wrench for Renault
Wheel hub nut socket wrench for Renault Mascott, Midlum, Premium (nut OEM 5010372353).
