The cap / wrench for loosening the hub nut Land Rover DEFENDER 1999-2016. ( nut number RFD100000)
Product code: W0642
Brand: Lincos
Product description
Product packing
Pack number | Dimensions | Weight |
---|---|---|
1 | 15 x 8 x 8 cm | 0.7 kg |
Delivery fee
Delivery method | Gross price |
---|---|
Pickup in Nagytarcsa | 0,00 € |
Pickup in Debrecen | 0,00 € |
DHL Worldwide Express | 67,48 € |
More products in this category
Puller for wheel hub / bearing Ford Focus II, C-Max, Volvo, Mazda 3,-puller with ABS and without ABS
Product code: W0305
Axial joint tool, 33-42mm
High-quality axle joint installation tool, specially designed for quick and efficient removal and installation of vehicle axle joints. Thanks to its 1/2" drive, the tool is easy to use with many manual and pneumatic wrench systems.
Product code: MG50443
Universal bearing removing/installing kit, 34-84mm
Spindle: M10xP1.5, M12xP1.75, M14xP2.0, M16xP2.0, length/Ø A 44/34, 46/36, 54/44, 56/46, 58/48, 66/56, 68/58, 70/60, 78/68, 80/70, 84/72, B 48/38, 50/40, 52/42, 60/50, 62/52, 64/54, 72/62, 74/64, 76/66mm
Product code: MG50093
Pneumatic CV joint boot install tool
This pneumatic CV joint boot install tool makes installation fast and easy. It prevents boot damage and ensures a tight fit. Simply adjust the air control switch and place over the CV joint. Lubricate before use. Working pressure: 5-9bar. Perfect for auto mechanics!
Product code: MG04B1085
Steering readout scale, 270-350mm
This Steering wheel level is a specialized tool designed to assist in the accurate leveling of a vehicle's steering wheel before it is locked into position. This step is crucial prior to checking or adjusting the front wheel alignment.
Product code: MG99230
Rear Suspension Bush Puller Ford Mondeo
Rear Suspension Bush Puller Ford Mondeo
Product code: W0020
Puller to the hub / bearings VW T5
Puller to the hub / bearings VW T5
Product code: W0129
Puller bushings rear beam Renault Laguna II (to no of original sleeves with flat his back)
Product code: W0329
Front control arm bushing puller Renault Laguna II, Trafic II
Front control arm bushing puller Renault Laguna II, Trafic II. Renault silent OE: 8200000512.
Product code: W0368
Adapters to bolts down Jeep - Cherokee, Grand Cherokee, Wrangler
Product code: W0398
Press the down crossover pins Jeep Cherokee, Grand Cherokee, Wrangler
Product code: W0399
Press the king pins the upper and lower Jeep - Cherokee, Grand Cherokee, Wrangler
The tool is used to remove and install the kingpins in the steering knuckle assembly. Use the king pin press tool to press out the king pin from the steering knuckle. The tool will apply force to push the pin out of its housing. Once the king pin is pressed out, you can inspect it for wear or damage and replace it if necessary.
Product code: W0401
Puller for wheel hub / bearing VW Polo, Seat, Skoda, Audi A2-puller with ABS and without ABS
This puller is specifically designed to handle wheel hubs and bearings on VW Polo, Seat, Skoda, and Audi A2 vehicles. Whether your vehicle is equipped with ABS or without ABS, this versatile tool ensures a secure grip and effortless removal.
Product code: W0306
Hydraulic wheel hub puller 10T
Hydraulic wheel hub puller 10T
Product code: MG04B1044B
Puller front lower bushing control arm Renault Laguna, Espace Trafic, Opel Vivaro (No. oe bushings 82 00 002 869)
Product code: W0326
CV Boot Tool
CV Boot Tool is allows the convenient and efficient installation of rubber bells on the half-axle of the vehicle.
Product code: MG04B1099
Bushing and silent puller adapter set for VW T4, LT, Sprinter, Movano, Master
Bushing and silent puller adapter set for VW T4, VW LT, Mercedes Sprinter, Opel Movano, Renault Master.
Product code: C02/0141
Rear axle bushing press for Toyota Yaris, Passo, Echo
The Rear Axle Bushing Press is designed to facilitate the installation or replacement of rear axle bushings in Toyota Yaris, Passo, and Echo models. Rear axle bushing press for Toyota Yaris, Passo, Echo. Bushing
Product code: W0720
Ball joint separator 39mm
Steering rods, stabilizers, etc. designed to remove ball-jointed rotating parts.
Product code: MG04B3022D
Ball joint separator 18mm
Steering rods, stabilizers, etc. designed to remove ball-jointed rotating parts.
Product code: MG04B3022A
Ball joint separator 19-22mm
Steering rods, stabilizers, etc. designed to remove ball-jointed rotating parts.
Product code: MG04B3022
Cv boot clamp tool with cutter
Cv boot clamp tool with cutter is suitable for installing and tightening tape-type clamps. It has a built-in cutter for cutting tape. With the built-in cutting and winding mechanism, the tape can be pulled and cut quickly and efficiently.
Product code: MG04B1008
Bushing puller for BMW E36, Z3, E46 rear suspension arms
Bushing puller for BMW E36, Z3, E46 rear suspension arms.
Product code: W0083
Universal press for bolts and sleeves
Universal, strengthened press for bolts and sleeves of trailing arms.
Product code: W0099
Press and puller for ball joints Renault, Opel, Iveco, VW, Nissan, Mercedes etc., 20 adapters
Universal press and puller for ball joints Renault, Opel, Iveco, VW, Nissan, Mercedes etc., with 20 adapters. For models manufactured in 2006 and on.
Product code: W0162
Hub Puller VW, Seat, Skoda-Puller with ABS and without ABS
The tool is suitable for removing the wheel hubs of both vehicles with and without ABS. Therefore, it can be widely used when servicing VW, Seat and Skoda models. The tool fits exactly on the hub and provides the right grip to pull the hub off efficiently and safely.
Product code: W0163
Puller arm bushings rear axle Ford Galaxy, Seat Alhambra, VW Sharan
Puller arm bushings rear axle Ford Galaxy, Seat Alhambra, VW Sharan (oe VW 7M0 407 181 A)
Product code: W0233
Rear bearing hub puller, Citroen; Peugeot ; Toyota ; Opel after 2016
This tool is designed for the removal and installation of wheel bearings, especially on specific vehicles models after 2016. The design eliminates the need to remove the steering knuckle and ABS sensor and simplifies the repair process.
Product code: W0736
Adapters for removing and installing the rocker pin Mercedes W124
Product code: W0349
Puller sleeve right front beam Ford Focus II; III; C-Max; Volvo (no oe. 1326988, 4M515L021AB, 1326988, 23033, 30714550, FM-FOC5
Product code: W0370
Puller sleeve rear beam Front Bmw Series 5,6,7 / F 10, F11, F12, 13, F01 (33316790573, 33 31 6 775 780)
This tool is a great help in installing and removing the bushing. Puller sleeve rear beam is a high quality tool specially designed for Bmw Series 5,6,7 / F 10, F11, F12, 13, F01 models. This tool fits the vehicle perfectly and guarantees perfect operation and durability.
Product code: W0488
Rear beam sleeve puller, Bmw Series 5,6,7 / F 10, F11, F12, 13, F01 (33 31 6775792, 33 31 6 793 864)
This puller helps you safely and efficiently remove the bushings that attach to the rear axle. The purpose of the tool is accurate and powerful removal, minimizing the risk of injury and facilitating service work.
Product code: W0490
Wrenches for unscrewing / fixing shock absorbers (4 types )
The wrenches for unscrewing and fixing shock absorbers are specialized tools designed for specific applications. They are made of hardened and higher-grade materials to withstand the forces and torque required for working with shock absorbers. The wrenches are categorized by the size of the hexagon, and each size is suited for different car makes and models.
Product code: W0549
Steering rack knuckle tool set, 30-45mm
This steering rack knuckle tool set makes removing and installing steering knuckles fast and easy. With interchangeable heads to fit racks with hex drive, two flats, and round ends from 30-45mm, it's versatile and effective. Drive: 32mm Hex, 1/2" square.
Product code: MG50423
CV Boot Clamp Pliers, 184mm
CV Boot Clamp Pliers, 184mm 1/2" holes on the handles can be used as keys.
Product code: MG50110
Rear beam bushing puller Ford Fiesta V, MK5; Fusion; Mazda 2 (Febi 27245; Ford 1 426 699)
The Rear Beam Bushing Puller is a specialized tool designed for the assembly and disassembly of rear beam bushings in Ford Fiesta V (MK5), Fusion, and Mazda 2 vehicles. This tool is specifically engineered to simplify the process of removing and installing rear beam bushings.
Product code: W0705
The wrench for the side pressing nut of the Mercedes steering rack
This tool is ideal for professionals and DIY enthusiasts alike, this tool ensures seamless installation, removal, and adjustment of the steering gear side pressure nut.
Product code: W0728
Axial joint tool, 27-42mm
Axial joint tool, 27-42mm can be used to remove and attach the axial joints.
Product code: MG50444
Press for disassembly and assembly, bolts Ford Transit VI MK6
This press tool is a special tool used to disassemble and reassemble the kingpin of a Ford Transit VI (MK6) type vehicle.
Product code: W0681
Rear control arm bushing puller Ford, Volvo
Rear control arm bushing press and puller for Ford and Volvo. Puller and press tool for rear trailing arm bushes. The tool is used to assemble and disassemble bushings without the need to dismantle the swing arm. Threads should be lubricated with grease before use.
Product code: W0671
Rocker Arm Pin puller and press for Renault Scenic II, Clio III;
It is used for the disassembly and assembly of the wishbone pin at the front bottom of the vehicle.
Product code: W0670
Rear control arm bushing puller Hyundai, Kia
The rear control arm bushing puller Hyundai, Kia is a special tool used to install and remove rear steering linkage bushings on Hyundai and Kia vehicles. Rear steering link bushings are components that are found in the steering system and are important for stable steering and control of the vehicle.
Product code: W0668
Puller for rear steering knuckle bushing for KIA and Hyundai
Rear steering knuckle silent puller for KIA, Hyundai.
Product code: W0667
Bushing puller and press for Fiat, Opel rear arms
Silent puller and press for Fiat Doblo (2009 and on) rear arms.
Product code: W0658
Puller for swingarm bushing rear top Toyota Avensis II, Celica, Auris, Lexus CT (bushing 48770-05010, 48770-21011)
Product code: W0628
Sleeve and silent puller for BMW 1, 3, X1 rear arms
Sleeve and silent puller for BMW 1 3, X1 Hatchback, Coupe, Convertible, Saloon, Touring rear arms. (OE 33326763092)
Product code: W0587
Rear bushing puller for Opel Corsa B, C, Tigra
Rear silent puller for Opel Corsa B, C, Tigra. Opel OEM: 24443815, 5402636.
Product code: W0539
Silent puller for VW, Audi, Seat, Skoda engines and gearboxes
Allows the replacement of engine and gearbox silent blocks in VAG engines.
Product code: W0521
Puller sleeve for BMW bushings
Pulling tool for the assembly and thedisassembly of bushings on the car. BMW: 5 (E60), 5 Touring (E61), 6 (E63), 6 convertible (E64).
Product code: W0519
Puller hub / bearing Mondeo IV; Focus II RS (FORD 1 463 833)
This tool is designed for the assembly and disassembly of the front hub and bearing on Ford Mondeo IV and Focus II RS vehicles.
Product code: W0506
Puller sleeve the arm forward (lower) L / R BMW X5 (E70) X6 (E71, E72), 3.0-4.8 (oe sleeve 31106778015)
The tool is used to remove and install the bushing sleeve without the need to disassemble the entire suspension system or remove the swing arm from the vehicle. It helps save time and effort during maintenance or repair procedures related to the front lower swing arm bushings.
Product code: W0501
Puller hub bearing the brake disc Ford Transit
The puller hub bearing the brake disc is a special tool used for mounting and dismounting brake disc bearings on Ford Transit vehicles.
Product code: W0500
Puller hub / bearing Fiat Ducato Citroen Jumper
Product code: W0499
Puller hub bearings Renault Trafic, Opel Vivaro 2.0 DCI
Product code: W0487
Puller / Press sleeve metal - rubber arm rear longitudinal Honda Civic, CR-V, Concerto, CRX, Rover 200 (OE-sleeve 52385 SR3-000)
Product code: W0485
Rear beam sleevepuller for assembly and disassembly AUDI A4, A4 Avant 94-01
Tool for installing and removing rear beam bushings, especially for Audi A4/A4 Avant 94-01 models.
Product code: W0479
Ball joint socket wrench for Renault Master III, Opel Movano B
Ball joint socket wrench for Renault Master III, Opel Movano B.
Product code: W0469
Rear beam bushing puller for Mercedes S-Class (W220) CL-Class (C215)
The rear beam bushing puller is a specialized tool designed to remove the rear beam bushings from Mercedes-Benz S-Class (W220) and CL-Class (C215) vehicles. The rear beam bushings are essential components of the rear suspension system, and they help provide stability and control to the rear axle assembly.
Product code: W0453
Power steering pump puller
This tool facilitates the safe removal of the power steering pump.
Product code: W0430
Puller sleeve front beam Mercedes ML W163 (oe bushings 163 330 02 75/1633300275)
Product code: W0428
Puller of bushings of the front control arm Volkswagen T4
The puller is used to install and remove control arm bushings on the car.
Product code: W0427
Puller sleeves of rear beam / bridge Mercedes W210, W202, W203, W140 (OE 129 351 21 42)
The bushing puller is used to remove and install the rear axle bushing.
Product code: W0424
Puller sleeve rear beam Renault Megane II; Scenic II; Grand Scenic II (oe sleeve 7701479190)
The Puller sleeve rear beam is a specialized tool to assist in the assembly and disassembly of rear beam bushings. This puller is specially designed for Renault Megane II, Scenic II and Grand Scenic II models.
Product code: W0379
Puller for removing bushing the rear control arm Fiat Bravo II (No. oe bushing 50700796)
Product code: W0378
Rear control arm bushing puller for BMW
Rear control arm bushing puller for BMW E60, E61, E63, E64, E65, E53.
Product code: W0376
Rear beam sleeve puller Opel Zafira A; Astra G ; Combo ; Meriva A (oe number 402644)
This rear beam sleeve puller is designed to assist installing and removing bushings directly on the vehicle. Built to be compatible with various Opel models, it provides a tight fit and smooth operation, eliminating potential damage to the bushing or vehicle.
Product code: W0371
Puller sleeves left front beam Ford Focus II; III; C-Max; Volvo (no oe sleeves 1695011, 1355621, 1695011,23032, 30666042, FM-FOC
Product code: W0369
Sleeve puller for Ford Mondeo MK 4 (2007- ), Volvo rear swingarm
Tool for assembly and disassembly of the sleeve without the need to disassemble the swingarm.
Product code: W0364
Puller for wheel hub / bearing with and without Abs - Ford Mondeo, Focus, C-Max, Mazda 3, Volvo C30 C70 S40 V50
Product code: W0359
Adapters for mounting and dismounting the front control arm bolts for Renault, Dacia
These adapters work with our universal press tool (W0099 - Universal press for bolts and sleeves). Adapters for mounting and dismounting the front control arm bolts.
Product code: W0353
Puller bushings front control arm Renault Clio II; Renault kangoo I; Thalia I ( nr oe tulei 7700424399 )
Product code: W0337
Puller bushing front control arm Renault Laguna II; Espace IV ( nr oe 8200002868 ; FE22821 )
Product code: W0334
Puller bushings rear beam Renault Laguna II set (5 adapters to org and not of original sleeves)
Product code: W0330
Press the upper crossover pins Jeep Cherokee, Grand Cherokee, Wrangler
Product code: W0313
Puller the rear axle bushings Volkswagen / Audi / Seat after 2004
Product code: W0311
Rear beam bushing puller for BMW X5 E53
Rear beam bushing puller (No. oe 33 17 6 770 456) for BMW X5 E53
Product code: W0246
Puller arm bushings front / rear, SEAT Leon, Toledo II, Skoda Octavia, VW Bora, Golf IV
The bushing puller is a tool for removing front and rear wheel hub bushings for SEAT Leon, Toledo II, Skoda Octavia and VW Bora, Golf IV models.
Product code: W0231
Double-row bearing puller and wheel hubs II version (BMW, Mercedes etc.)
Double-row bearing puller and wheel hubs II version (BMW, Mercedes etc.)
Product code: W0205
Bushing puller, Citroen C5
Silent puller, Citroen C5 (sleeve OE no. 352384)
Product code: W0196
Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot
Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot
Product code: W0195
Control arm bushing puller lower front Opel Astra G, H, Zafira, Vectra B
The control arm bushing puller for the lower front of Opel Astra G, Astra H, Zafira, and Vectra B is a specialized tool used to remove the control arm bushings in the front suspension of these vehicles.
Product code: W0190
Rear beam bushing puller BMW E32 / E34 (nr. oe 3331112670)
When working on a BMW 5 Sedan (E34), BMW 5 Touring (E34) or BMW 7 (E32), the rear suspension bushing puller makes it easy to remove the bushings from the suspension. This tool provides the proper grip and power transfer to easily and safely remove bushings from the suspension.
Product code: W0181
Sleeve puller, Golf IV, Audi A3, Skoda Octavia for the sleeve FEBI
Sleeve Puller designed specifically for Golf IV, Audi A3, and Skoda Octavia vehicles, compatible with FEBI sleeves. Ensures a precise and secure grip for effective removal.
Product code: W0172
Puller arm forward bushing Renault Laguna I
Puller arm forward bushing Renault Laguna I (nr. oe 77 00 824 042)
Product code: W0171
Puller arm forward bushing Renault Laguna I (under a hydraulic press)
Puller arm forward bushing Renault Laguna I (under a hydraulic press) (nr. oe 77 00 822 503)
Product code: W0170
Steering rod wrench
Allows the inner tie rod to be removed and installed without removing the rack.
Product code: W0168
Universal puller small metal-rubber sleeve
Universal puller small metal-rubber sleeve. It is a perfect and ideal tool for effective and safe bushing removal.
Product code: W0167
Upper control arm central bolt puller for VW, Audi after 2005
Upper control arm central bolt puller for VW, Audi after 2005.
Product code: W0164
Press, puller for bolts Renault Master / Opel Movano
Press, puller for bolts Renault Master / Opel Movano + W0160 adapter
Product code: W0161
Sleeve puller, rear beams BMW E39 (sleeve oe no. 3317 1093 008)
The tool is used to press in and out the bushing number oe 3317 1093 008 in cars.
Product code: W0158
Sleeve puller, rear beams Mercedes Benz S Class W / V 220 and C215 CL
The bushing puller is used to remove and install the rear axle bushing.
Product code: W0157
Adapters for press, puller for bolts VW T4, LT, Mercedes Sprinter
The adapters allow the removal and installation of bolts in VW T4, LT and Mercedes Sprinter vehicles.
Product code: W0147
Sleeve puller for control arm rear axles for Fiat, Opel, Saab
Sleeve puller for control arm rear axles for Fiat, Opel, Saab
Product code: W0142
Press, puller for bolts (W0027, W0102, W0116), Mercedes, VW, Opel etc.
Press, puller for bolts (W0027, W0102, W0116), Mercedes, VW, Opel etc.
Product code: W0133
Set of adapters for dismantling and mounting of lower bolts, IVECO
The adapter kit is precisely engineered and durable, and allows reliable and efficient removal and installation of lower suspension bolts. Designed to IVECO vehicle specifications to fit perfectly with the lower suspension bolts and allow smooth and safe operations.
Product code: W0116
Press for dismantling and mounting of lower bolts, IVECO
Press for dismantling and mounting of lower bolts, IVECO
Product code: W0115
Puller for rear beam sleeve, Ford Fiesta, Ka
Puller for rear beam sleeve is a specialized tool designed for Ford Fiesta and Ka models. This puller is an essential accessory for removing the rear beam sleeve, facilitating efficient and precise maintenance or replacement procedures.
Product code: W0114
Sleeve puller, rear beams FIAT Panda 2003-
Suitable for disassembling and assembling the bushings on the car for FIAT Panda models after 2003.
Product code: W0107
Adapters for press, puller for bolts, Master, Movano, Interstar
Adapters for press, puller for bolts, Renault Master, Opel Movano, Nissan Interstar
Product code: W0102
Puller screw, M12, 250mm
Screw for bushing and sleeve pullers, M12, 250mm.
Product code: W0101
Press, puller for bolts of suspension arms Opel, Renault, Nissan
Press, puller for upper and lower ball bolts of the suspension arms in Master, Movano, Interstar.
Product code: W0100
Adapters for press, puller for bolts, Master, Movano, Interstar
Adapters for press, puller for bolts, Renault Master, Opel Movano, Nissan Interstar
Product code: W0098
Press, puller for bolts of suspension arm, front Master/Movano/Interstar
This tool has a combined press and puller function, which allows convenient and efficient handling of the suspension arm pins. With the press function, the tool is able to press or unpress the pins from the rocker arms, ensuring accurate and stable pin insertion or removal.
Product code: W0097
Sleeve puller, rear beams, BMW E39 sedan
The sleeve puller is used to remove and install the rear axle bushing.
Product code: W0096
Puller for suspension arm sleeves – front, BMW E 39 M5
This suspension arm sleeves puller is specially designed for BMW E39 535i ;540i M5 ; BMW 7 E38 models. The tool helps technicians to remove the suspension bushing easily and safely without damaging surrounding parts or the bushing.
Product code: W0086
Tool for hub removal (set of 15 screws)
Tool for hub removal – cars of A, B, C class and others. Set of 15 screws.
Product code: W0072
Sleeve puller, rear beams, Fiat Punto
Sleeve puller, rear beams, Fiat Punto
Product code: W0058
Front arm bushing puller BMW E39
The Front Arm Bushing Puller BMW E39 is a tool designed to remove the front arm bushing from the BMW E39 model.
Product code: W0057
Rear suspension bushing tool Renault Laguna II
Rear suspension bushing tool Renault Laguna II
Product code: W0047
Adapters for press, puller for bolts, Renault Master, Opel Movano
Adapters for press, puller for bolts, Renault Master, Opel Movano. It cooperate with W0027 and W0045 presses.
Product code: W0046
Puller for double-row wheel hub bearings
Puller for double-row wheel hub bearings. Mechanical kit to facilitate work with double-row front and rear axle bearings. The purpose of the puller is to safely remove this type of bearing from the wheel hub.
Product code: W0037
Sleeve puller, Golf IV, Audi A3, Skoda Octavia
Sleeve puller, Golf IV, Audi A3, Skoda Octavia
Product code: W0006
Puller for plastic sleeves, Skoda Fabia, VW Polo
Puller for plastic sleeves, Skoda Fabia, VW Polo.
Product code: W0005
Puller for suspension arm bushings, Cinquecento, Seicento
Puller for suspension arm silent blocks, Cinquecento, Seicento
Product code: W0004
Universal sliding hammer hub puller, with 15 screws
Universal sliding hammer hub puller, with 15 screws
Product code: W0002
Suspension bushing puller, Opel Vectra B, BMW E36
Ideal for the removal and refitting of the suspension bushes without removing the trailing arm assembly from the vehicle.
Product code: W0001
Universal press for extracting and pressing pins and silents
Its main purpose is the disassembly and assembly of silents in the suspension. Adapters not included.
Product code: C02/0135
Hydraulic cylinder press for silents 12T
Press for extruding bolts and ball joints with a 12 ton press capacity.
Product code: C02/0136
Silent remover and installer press with adapters for Movano, Master, Nissan
Press with bushing sleeves for the top link of the swingarm of Opel Movano, Renault Master, Nissan Interstar. Universal press for extruding and pressing pins, metal-rubber sleeves, ball pins and many elements that are within the dimensions of the press.
Product code: C02/0145
Adapter set for bushings of swingarm pins for VW T4, LT, Crafter, Mercedes Sprinter
Adapter set for bushings of swingarm pins for VW T4, LT, Crafter, Mercedes Sprinter
Product code: C02/0146
Press for bushings and silents for hydraulic cylinder 12T
Press for pins and bushings without adapters. Can be used with a hydraulic cylinder.
Product code: C02/0149
Hollow hydraulic cylinder 20t
Hydraulic cylinder with through and threaded hole. It can be used with various types of mechanical presses that are designed for the extraction of metal and rubber silents, pins, joints, etc.
Product code: C07/0112
Ball joint press set
For the removal of ball joints, U-joints, brake anchor pins, and more on most 2 wheel drive (2WD) and 4 wheel drive (4WD) vehicles without removing the control arm from the vehicle.
Product code: CKB04009
Clamp 50-125mm
This tool is designed to hold, clamp or encircle one or more objects, e.g., cables or pipes.
Product code: JBM11890
Clamp 15-45mm
This tool is designed to hold, clamp or encircle one or more objects, e.g., cables or pipes.
Product code: JBM11891
Universal press and pull sleeve kit, 34-82mm
Spindle: M10, M12, M14, M16, M18, Adapters (Outer/inner diameter): 74/54mm, 76/56mm, 78/58mm, 72/52mm, 70/50mm, 68/48mm, 80/60mm, 82/62mm, 66/46mm, 64/44mm
Product code: JBM52494
CV joint boot clamp pliers
CV joint boot clamp pliers. Holes of 1/2" on the handles to use as keys. Opening: 0-20mm.
Product code: JBM52619
Pneumatic CV boot installation tool (8bar)
The CV boot installation tool is to be used solely for the stretching of flexible CV boots onto drive-shaft assemblies of automotive vehicles.
Product code: JBM52994
Ball joint and silent block remover/installer set
Suitable for any passenger car, utility trucks and SUV vehicles, in which the ball joints have an interference fit. The tools allow for easy removal and installing without large-scale demounting.
Product code: MG50042
Front wheel drive kit, 55.5-91mm, axle 380mm
Sizes(d) 55.5, 59, 62, 65, 66, 71.5, 73, 78, 84, 86, 91mm, axle 380mm
Product code: MG50405
Wheel bearing removal/installing tool set
For the VAG group, wheel hub size 72mm, Audi A2, Skoda Fabia after 2000, VW Polo, Fox after 2005, Seat Ibiza after 2002.
Product code: MG50432
Wheel Bearing tool VW
Bearing installation and removal tool for 85mm bearings. Application Volkswagen Touareg, Transporter, Multivan & T5
Product code: MG50432A
Universal silent block remover/installer set, 34-72mm, 44-82mm
Our universal silent block remover/installer set makes extracting and installing silent blocks, hydraulic bearings, and more a breeze! With spindles and press adapters in various sizes, this set is perfect for any job.
Product code: MG50605
Puller sleeve back beam (middle) BMW 5 (E 60, E61) BMW 6 (E63, E64) (oem 33176770825)
This tool allows easy and safe removal of the center silencer from the rear beam without disassembling other components or the entire beam system.
Product code: W0520
Axle nut socket set, 9pcs
Axle nut socket set, 9pcs is a special set of tools required for tightening and loosening vehicle axle nuts. These types of nuts are usually large and overtightened and require special wrenches to fit their size and shape.
Product code: MG04B1015
Wishbone lever tool
Wishbone lever tool, Length: 1180mm, Tube: Ø 3.5cm, Brace distance: 50 - 45 - 40 - 35 - 30cm, Fastening support: 15 x 13cm
Product code: JBM51902
Wrench for the front wheel hub nuts of Iveco 35 vehicles
Special key for mounting and dismounting the front hub nut of Iveco 35 vehicles. Inner diameter: 62.5mm.
Product code: W0502
Puller for front control arm pins of Renault Master, Opel Movano
Puller for front control arm pins of Renault Master, Opel Movano
Product code: W0045
Adapter for mounting pin BMW 3 and Z 3 (BMW E36) BMW 31126758510
The Adapter for Mounting Pin BMW 3 and Z3 is a specialized tool designed to facilitate the precise installation or pressing of pins in BMW 3 Series and Z3 models. This adapter is specifically designed to work with a hydraulic or manual press, ensuring a secure and accurate pin installation process.
Product code: W0707
Socket wrench key for Citroen and Peugeot swingarms
Socket wrench key for Citroen Berlingo, C4 and Peugeot 307, 308, 5008 swingarms.
Product code: W0362
Steering Knuckle Nut Wrench for Mercedes Actros, Axor, Antos, Arocs
This wrench is designed for unscrewing the steering knuckle nut of specific Mercedes trucks. It offers a precise fit and is compatible with both OEM and certain aftermarket parts.
Product code: W0735
Rocker Arm Nut Wrench for Iveco Daily 2006 E4
This tool is specifically tailored to unscrew the nut of the rocker arm.
Product code: W0734
Wheel hub nut socket wrench for Renault
Wheel hub nut socket wrench for Renault Mascott, Midlum, Premium (nut OEM 5010372353).