Fitting for testing power steering rack on the test bench
Product code: MS00128
Brand: MSG
Product description
- This fitting is designed for efficient testing of power steering racks on hydraulic diagnostic benches.
- It enables a quick and secure connection between the test bench's hydraulic system and the steering rack using a fast make-up coupling.
- Ideal for precise and repeatable diagnostics, it supports streamlined testing procedures without the need for permanent modifications.
- The fitting is compatible with BMW 5 Series (2010–2017) and 7 Series (2008–2015), ensuring a direct and reliable fit for these vehicle models.
It corresponds to several OEM part numbers, including: 01092870, 2GS0905, 32106788693, 32106793201, 32106795225, 32102472856, 7882434221, 7882993226, 7882993252, 8002211, ATGR23291RB, BW235, BW235R, BW9235, DSR2414L, and R2329.
Product packing
| Pack number | Dimensions | Weight |
|---|---|---|
| 1 | 0 x 0 x 0 cm | 0.15 kg |
Delivery fee
| Delivery method | Gross price |
|---|---|
| Pickup in Nagytarcsa | 0,00 € |
| Pickup in Debrecen | 0,00 € |
| DHL Worldwide Express | 61,67 € |
More products in this category
Key to loosening the rear hub nuts M55X1,5 Mercedes Sprinter, VW Crafter after 2006 (hardened)
Key to loosening the rear hub nuts is designed to fit the specific dimensions of the hub nut and provide the necessary grip and torque for loosening it.
Product code: W0403
Puller to the hub / bearings VW T5
Puller to the hub / bearings VW T5
Product code: W0129
Rear axle bushing press for Toyota Yaris, Passo, Echo
The Rear Axle Bushing Press is designed to facilitate the installation or replacement of rear axle bushings in Toyota Yaris, Passo, and Echo models. Rear axle bushing press for Toyota Yaris, Passo, Echo. Bushing
Product code: W0720
Rear control arm bushing puller for BMW
Rear control arm bushing puller for BMW E60, E61, E63, E64, E65, E53.
Product code: W0376
Rear control arm bushing puller Ford, Volvo
Rear control arm bushing press and puller for Ford and Volvo. Puller and press tool for rear trailing arm bushes. The tool is used to assemble and disassemble bushings without the need to dismantle the swing arm. Threads should be lubricated with grease before use.
Product code: W0671
Bearing nut wrench for hydraulic steering rack repair for Citroen, Peugeot models
Specialized wrench for disassembling, assembling, and adjusting the side preload nut in hydraulic steering racks. Precision-fit for select Citroën and Peugeot models.
Product code: MS00136
Inner tie rod master tool kit with 12 adaptors
Inner tie rod master tool kit with 12 adaptors. Long socket and crowfoot design for easy removal and installation without removing the rack. Includes crowsfeet sizes from 29mm to 42mm and 1-3/16" to 1-1/2".
Product code: MG91049
Tool for hub removal (set of 15 screws)
Tool for hub removal – cars of A, B, C class and others. Set of 15 screws.
Product code: W0072
Universal sliding hammer hub puller, with 15 screws
Universal sliding hammer hub puller with 15 screws, ideal for removing seized hubs. The tool weighs 13kg and comes with three types of 5 screws for various applications. Size range: 90mm-155mm (±5mm), with an external flange dimension of 185mm.
Product code: W0002
Double-row bearing puller and wheel hubs II version (BMW, Mercedes etc.)
Double-row bearing puller and wheel hubs II version (BMW, Mercedes etc.)
Product code: W0205
Front control arm bushing puller Renault Clio II; Renault kangoo I; Thalia I (7700424399 )
Front control arm bushing puller for Renault Clio II, Kangoo I, and Thalia I. Suitable for mounting and dismounting both bushings in the swingarm.
Product code: W0337
Axial joint tool, 33-42mm
High-quality axle joint installation tool, specially designed for quick and efficient removal and installation of vehicle axle joints. Thanks to its 1/2" drive, the tool is easy to use with many manual and pneumatic wrench systems.
Product code: MG50443
Wheel Bearing tool VW
Bearing installation and removal tool for 85mm bearings. Application Volkswagen Touareg, Transporter, Multivan & T5
Product code: MG50432A
CV Boot Clamp Pliers, 184mm
CV Boot Clamp Pliers, 184mm 1/2" holes on the handles can be used as keys.
Product code: MG50110
Universal silent block removing and installing kit, 34-84mm
Spindle: M10xP1.5, M12xP1.75, M14xP2.0, M16xP2.0, length/Ø A 44/34, 46/36, 54/44, 56/46, 58/48, 66/56, 68/58, 70/60, 78/68, 80/70, 84/72, B 48/38, 50/40, 52/42, 60/50, 62/52, 64/54, 72/62, 74/64, 76/66mm
Product code: MG50093
Front control arm bush puller Renault Laguna II; Espace IV ( nr oe 8200002868; FE22821 )
This tool is used for mounting and dismounting the bushing.
Product code: W0334
Front Sledge Bush Puller for MERCEDES ML W163
The front sledge bush puller is specifically designed for Mercedes ML W163 models, suitable for the removal and installation of front suspension bushings. This tool allows for efficient work directly on the vehicle, simplifying and speeding up the maintenance process.
Product code: W0428
Rear axle silent puller
The rear axle silent puller is a special tool used to remove and install the metal-rubber bushings in the rear suspension of vehicles on various Honda and Rover models (Honda Civic, CR-V, Concerto, CRX, Rover 200).
Product code: W0485
Hub and Bearing Puller for Fiat Ducato and Citroen Jumper
This hub and bearing puller is specifically designed for Fiat Ducato and Citroen Jumper vehicles, allowing for the quick and efficient mounting and dismounting of hubs and bearings on the vehicle without the need to disassemble the suspension.
Product code: W0499
Steering rack adjusting tool for side nuts for Lexus, Mazda and Toyota models
Effortlessly mount, dismount, and adjust side tightening nuts of steering racks without deformation. Compatible with various Lexus, Mazda, and Toyota models.
Product code: MS00029
Wrench for upper nut of worm gear steering rack for Nissan Navara, Pathfinder models
Specialized tool for quick and safe installation/removal of the upper nut of the worm gear in steering racks. Designed for Nissan Navara (D40) and Pathfinder (R51), ensuring quality repair.
Product code: MS00033
Steering Rack Side Nut Wrench for Ford USA Probe, Mazda 626 III, IV and Xedos 6 models
Specialized tool for the installation, removal, and adjustment of the steering rack side tightening nut. Designed for Ford Probe II and Mazda 626 III, IV and Xedos 6 models, ensuring precise and damage-free maintenance.
Product code: MS00036
Fitting for testing power steering pump on a test bench for Honda Accord, CR-V
Fitting for diagnosing power steering pumps on a test bench. Compatible with multiple OEM part numbers and suitable for Honda Accord (2003-2008) and Honda CR-V (2001-2012).
Product code: MS00070
Specialized tool for removal of the steering gear nut for Mitsubishi L200, Pajero models
A specialized tool for hydraulic steering rack repair, designed for safe disassembly of the gearbox nut. Prevents damage while loosening or tightening.
Product code: MS00085
Tool for mounting and dismounting of steering rack pinion bottom nut
An external star wrench designed for mounting and dismounting the steering rack pinion bottom nut in electric power steering racks. Ensures secure tightening and loosening without damaging the nut.
Product code: MS00090
Hydraulic steering rack retaining ring installer (d26)
Universal tool for installing and removing hydraulic steering rack piston retaining rings. This tool ensures easy and efficient installation or removal of retaining rings securing the piston to the steering rack rod.
Product code: MS00119
Shaft seals installer (d30)
A specialized tool for installing seals on hydraulic steering rack rods, ensuring a secure fit without damage. Designed for shafts with a 30mm diameter, this tool simplifies the repair process and prevents seal deformation.
Product code: MS00124
Universal silent block hydraulic extractor and installer set
Comprehensive silent block extractor and installer set with hydraulic capability, 44 mandrels (short and deep), power screws, and a hydraulic cylinder for universal automotive applications.
Product code: MG92611A
Rear beam bushing puller for BMW X5 E53
Rear beam bushing puller (No. oe 33 17 6 770 456) for BMW X5 E53
Product code: W0246
Puller sleeves for the left front beam Ford Focus II; III; C-Max; Volvo
Puller sleeves for the left front beam in Ford Focus II, III, C-Max, and Volvo S40 II, V50. For mounting and removing bushings directly on the car. Compatible with OE bushings: FM-FOC4, 1695011, 1355621, 23032, 30666042.
Product code: W0369
Axial joint tool, 27-42mm
Axial joint tool, 27-42mm can be used to remove and attach the axial joints.
Product code: MG50444
Tester for diagnostics of electric power steering units
The MS561 PRO is a professional diagnostic tester for standalone Electric Power Steering (EPS) units, supporting CAN, CAN-FD, and FlexRay protocols. It enables in-depth diagnostics, VIN programming, and error clearing for nearly 4000 car models.
Product code: MS561 PRO
Mechanism for testing hps racks under load
The MS521 mechanism simulates load resistance on HPS/EPS racks, allowing precise fault detection, including leaking valves, worn seals, and cylinder wear. Works with MS502M test bench and MS561 controller.
Product code: MS521
Tester for diagnostics of power steering system
The MS511 tester is designed for diagnosing power steering system components such as steering racks and pumps without removal from the vehicle. It evaluates fluid pressure and flow rate, helping determine if repairs are needed.
Product code: MS511
Tester for diagnostics of power steering system
The MS510 tester is used for diagnosing the hydraulic power steering system by determining the pressure generated by the vehicle's power steering pump in different operating modes (with load and without).
Product code: MS510
Test bench for diagnostics of power steering pumps
Test Bench MS504 is used for evaluation of the technical condition and output characteristics of mechanically driven single- and double-circuit pumps. The bench simulates operation of the tested unit in a car.
Product code: MS504
Test bench for diagnostics and flushing of power steering system
MS503N is a universal test bench for power steering systems operated from 230V mains. The test bench for system flushing and evaluation of the technical condition of a power steering rack or pump.
Product code: MS503N
Test bench for diagnostics of power steering racks
The MS502M test bench is designed for hydraulic power steering (HPS) rack diagnostics, allowing real-time performance simulation and detection of faults like leaks, packing seal wear, unit body damage, and Teflon ring deterioration.
Product code: MS502M
Steering rack shaft polishing machine
The MS402 polishing machine is designed for grinding and polishing steering rack shafts and other cylindrical components. It removes corrosion and ensures precise surface roughness. Works with 900mm max shaft length and operates at 1500 RPM.
Product code: MS402
Universal FlexRay Cable
The MS39000 Universal FlexRay Cable enables diagnostics of FlexRay-controlled EPS units removed from a vehicle. It works with the MS561 PRO tester, providing error reading, real-time data viewing, and control unit analysis with a single cable.
Product code: MS39000
Steering Rack Side Nut Wrench for Opel models
This specialized wrench is designed for quick and efficient installation or removal of steering rack side tightening locknuts. It ensures safe operation by eliminating the risk of damaging the locknut during use. Manufactured by MSG Equipment, the tool is compatible with various Opel models.
Product code: MS00006
Steering Rack Side Nut Wrench for Lexus and Toyota models
Specialized nut socket for easy installation, removal, and adjustment of steering rack side tightening nuts, ensuring damage-free and precise repairs. Compatible with select Toyota models. Manufactured by MSG Equipment.
Product code: MS00007
Steering Rack Side Nut Wrench for Citroen and Peugeot models
Specialized nut socket for easy installation, removal, and adjustment of steering rack side tightening nuts, ensuring damage-free and precise repairs. Compatible with select Citroen and Peugeot models. Manufactured by MSG Equipment.
Product code: MS00008
Steering Rack Side Nut Wrench for Dodge, Mercedes-Benz, VW
This specialized nut socket is designed for efficient mounting, dismounting, and adjustment of steering rack side tightening nuts. Manufactured by MSG Equipment, it ensures safe and damage-free handling during steering system maintenance and repair.
Product code: MS00010
Steering rack bushing tool for Ford and Mazda models
Specialized tool for safely mounting and dismounting steering rack bushings, preserving aluminum alloy nuts. Compatible with Ford Fiesta V, Ford Fiesta Van, Ford Fusion and Mazda 2.
Product code: MS00024
Steering rack bushing tool for Lexus GX and Toyota models
Specialized tool for safely mounting and dismounting steering rack bushings. This tool eliminates the risk to damage bushing in the process of its assembling and disassembing. Compatible with Lexus GX (2001-2009) and Toyota models.
Product code: MS00028
Wrench for upper nut of worm gear steering rack for Toyota Corolla 2002-2007
Specialized nut socket for efficient and safe installation/removal of the upper nut of the worm gear in steering racks. Suitable for Toyota Corolla (2002-2007).
Product code: MS00031
Steering Rack Side Nut Wrench for Nissan and Samsung models
Specialized tool for easy and safe installation, removal, and adjustment of the steering rack side tightening nut. Designed to prevent nut damage and ensure smooth maintenance for various Nissan models and Samsung SM5 (A32).
Product code: MS00034
Steering Rack Side Nut Wrench for MITSUBISHI LANCER IX
Specialized tool for easy installation, removal, and adjustment of the steering rack side tightening nut. Designed for Mitsubishi Lancer IX models, ensuring damage-free maintenance.
Product code: MS00035
Pressing screw for hub and pulley of power steering pump (М8×1,25) for MS00125 tool
A special tool for press-fitting a hub or a pulley on the power steering pump shaft. The tool is universal and applicable to all vehicle makes and models. The purpose of the tool is to assist in the pump assembly after its repair.
Product code: MS00056
Fitting for testing power steering pump on a test bench for Mercedes-Benz S-Class and SL models
A fitting for securely connecting power steering pumps to a test bench for diagnostics, compatible with Mercedes-Benz S-Class (W221), S-Class Coupe (C216), and SL (R230).
Product code: MS00062
Specialized nut socket for installation/removal of bearing bushing of steering rack
A specialized nut socket designed for the installation and removal of the bearing bushing in hydraulic steering racks. Ensures safe disassembly and reassembly, preserving the part for future use. Compatible with CHERY TIGGO 2005 and newer models.
Product code: MS00067
Specialized nut socket for installation/removal of bearing bushing of steering rack
A specialized nut socket designed for the precise installation and removal of support bushings in hydraulic steering racks, ensuring component integrity during maintenance.
Product code: MS00068
Steering rack bearing bushing crown socket for Great Wall Hover and Opel Frontera
Specialized nut socket for installing and removing the bearing bushing of the steering rack. Designed for hydraulic steering rack repairs, ensuring precise disassembly and assembly while preserving the part’s integrity.
Product code: MS00073
Steering rack bushing tool for Seat and VW models
This specialized wrench is an essential tool for hydraulic steering rack repairs. It simplifies the disassembly and assembly of the support sleeve, ensuring the part remains intact and undamaged for future use.
Product code: MS00078
Specialized Tool for Steering Gear Lock Nut Removal for KIA Sportage models
A specialized tool designed for hydraulic steering rack repair, ensuring safe removal and installation of the steering gear lock nut in KIA Sportage (1994-2004) models.
Product code: MS00088
Steering Gear Side Preload Nut Wrench
A specialized adjusting nut socket designed for the precise disassembly, assembly, and adjustment of the side preload nut in hydraulic steering racks. It ensures secure operation while preserving the integrity of the nut.
Product code: MS00089
Specialized nut socket for installation/removal of bearing bushing of steering rack
A specialized nut socket designed for disassembling and assembling the support sleeve during hydraulic steering rack repairs. Ensures safe and precise work while preserving the integrity of the part.
Product code: MS00091
Steering Rack Worm Gear Upper Nut Socket for Lexus, Mazda, Toyota models
A specialized nut socket designed for removing and installing the worm mechanism’s upper nut in electric power steering racks. Ensures a secure and damage-free operation.
Product code: MS00092
Steering rack worm gear upper nut socket, 36mm
Designed for electric power steering racks, this wrench removes or installs the worm mechanism's upper nut without causing damage. Designed for Alfa Romeo, Fiat, Ford, Honda, Jeep, and Lancia vehicles
Product code: MS00102
Steering rack bearing bushing nut sucket for Kia Carnival/Sorento, 27mm
This tool is used during hydraulic steering rack repairs for disassembly and assembly of the support sleeve. It facilitates the process while preserving the integrity of the part for further use.
Product code: MS00104
Hydraulic Steering Rack Shaft Limiter Set
This specially designed limiter set is intended for diagnosing and testing hydraulic steering racks. It restricts the movement of the steering rack shaft on a test bench, enabling precise and safe inspection.
Product code: MS00110
Tool for curling power steering rack pistons and power steering pump bearings
The tool is used for repairing hydraulic steering racks and hydraulic steering pumps. This tool is used for securely fixing pistons to steering rack rods or bearings in power steering pump housings by crimping during repairs.
Product code: MS00115
Steering Rack Side Nut Wrench for Audi, Seat, Skoda, VW models
Precision wrench designed for the removal, installation, and adjustment of the side preload nut in electric power steering racks. Ensures secure handling without damaging the component.
Product code: MS00116
Steering rack nut removal wrench for Acura, Honda, Mazda models
The MS50117-EPS wrench is designed for steering rack repairs with electric power assist. It ensures safe disassembly of couplings and shafts from the rack housing while preserving the nut's integrity.
Product code: MS00117
Hydraulic steering rack retaining ring installer (d22)
Universal tool for installing and removing hydraulic steering rack piston retaining rings. This tool ensures easy and efficient installation or removal of retaining rings securing the piston to the steering rack rod.
Product code: MS00121
Shaft seals installer (d26)
A specialized tool for installing seals on hydraulic steering rack rods, ensuring a secure fit without damage. Designed for shafts with a 26mm diameter, this tool simplifies the repair process and prevents seal deformation.
Product code: MS00122
Shaft seals installer (d22)
A specialized tool for installing seals on hydraulic steering rack rods, ensuring a secure fit without damage. Designed for shafts with a 22mm diameter, this tool simplifies the repair process and prevents seal deformation.
Product code: MS00123
Rotor position sensor puller for electric steering racks
The puller is designed for the safe dismantling of the steering rack rotor position sensor. It provides preserving the integrity of the rack and sensor, eliminates deformation and other types of damage during dismantling.
Product code: MS00143
Wrench for upper nut of worm gear steering rack for Nissan models
Specialized nut socket for efficient and safe installation/removal of the upper nut of the worm gear in steering racks, compatible with select Nissan models (Murano Z50, Teana J31, 2003-2008).
Product code: MS00018
Steering rack bushing tool for Honda models
Specialized tool for safely mounting and dismounting steering rack bushings, preserving aluminum alloy nuts. Compatible with Honda Accord VIII sedans and wagons. Work with this device is carried out with a wrench.
Product code: MS00023
Wrench for upper nut of worm gear steering rack for Toyota models
Specialized nut socket for efficient and safe installation/removal of the upper nut of the worm gear in steering racks, compatible with select Toyota (Avensis, Echo, Prius, Vitz, Yaris) models.
Product code: MS00026
Steering rack bushing tool for Ford and Nissan models
Specialized tool for quick installation and removal of steering rack bearing bushings. Manufactured by MSG Equipment, designed for Ford and Nissan models, ensuring efficient and deformation-free maintenance.
Product code: MS00039
Steering gear lock nut removal tool for Hyundai, Mitsubishi and Nissan models
A specialized tool designed to safely remove the steering gear lock nut in select Hyundai, Mitsubishi, and Nissan models, preventing damage during disassembly.
Product code: MS00047
Pressing screw for hub and pulley of power steering pump (BSW 3/8") for MS00125 tool
A special tool for press-fitting a hub or a pulley on the power steering pump shaft. The tool is universal and applicable to all vehicle makes and models. The purpose of the tool is to assist in the pump assembly after its repair.
Product code: MS00055
Pressing screw for hub and pulley of power steering pump (BSW 3/8") for MS00126 tool
A special tool for press-fitting a hub or a pulley on the power steering pump shaft. The tool is universal and applicable to all vehicle makes and models. The purpose of the tool is to assist in the pump assembly after its repair.
Product code: MS00057
Set of fittings for connection of steering rack to a test bench for Audi A4, A5, A8, Q5 models
A set of fittings for securely connecting steering racks to a test bench, designed for diagnostics of steering rack technical conditions, compatible with specified Audi models.
Product code: MS00061
Fitting for testing power steering pump on a test bench for Audi, BMW, Mercedes, Opel and VW models
A fitting for connecting power steering pumps to a test bench for diagnostics, compatible with a wide range of Audi, BMW, Mercedes-Benz, Opel, and VW models.
Product code: MS00063
Set of fitting for testing power steering rack on the test bench
A universal set of fittings for securely connecting a steering rack to a test bench during diagnostics. Includes fittings and clamping plates to minimize mechanical damage, even in heavy-duty operations.
Product code: MS00553
Steering Rack Bearing Bushing Nut Socket for Hyundai Tucson, KIA Sportage
Specialized nut socket for installing and removing the bearing bushing of the steering rack. Designed for hydraulic steering rack repairs, ensuring precise disassembly and assembly of the support sleeve.
Product code: MS00071
Steering Rack Bearing Bushing Nut Socket for Chevrolet Aveo
Specialized nut socket for the installation and removal of the steering rack bearing bushing. Designed for hydraulic steering rack repairs, ensuring safe disassembly and reassembly of the support sleeve.
Product code: MS00077
Hydraulic steering rack support sleeve wrench for Subaru models
Specialized wrench designed for the disassembly and assembly of the support sleeve in hydraulic steering racks of Subaru vehicles. Ensures precise work while preserving part integrity.
Product code: MS00107
Fitting for testing power steering pump on the test bench for Ford Focus
This specialized fitting is designed for diagnosing power steering pumps on a test bench, ensuring accurate and efficient fault detection. It is specifically compatible with Ford Focus models from 2011 to 2018.
Product code: MS00114
Hydraulic steering rack retaining ring installer (d30)
Universal tool for installing and removing hydraulic steering rack piston retaining rings. This tool ensures easy and efficient installation or removal of retaining rings securing the piston to the steering rack rod.
Product code: MS00120
Special wrench for installation/removal of ball screw bearing nuts of steering racks
Precision tool for securing the ball screw pulley during bearing locknut removal in electric steering rack repairs. Fits various Audi, BMW, Ford, and other models.
Product code: MS00144
Axle nut socket set, 9pcs
Axle nut socket set, 9pcs is a special set of tools required for tightening and loosening vehicle axle nuts. These types of nuts are usually large and overtightened and require special wrenches to fit their size and shape.
Product code: MG04B1015
Wrench for upper nut of worm gear steering rack for Infiniti and Nissan models
Specialized nut socket for efficient and safe installation/removal of the upper nut of the worm gear in steering racks, compatible with select Infiniti and Nissan models.
Product code: MS00019
Wrench for upper nut of worm gear steering rack for Lexus, Toyota and VW models
Specialized nut socket for efficient and safe installation/removal of the upper nut of the worm gear in steering racks, compatible with select Lexus, Toyota and VW models.
Product code: MS00020
Specialized Straight Crown Wrench for Steering Gear Nut Removal – Jeep Grand Cherokee (1992-1998)
A specialized straight crown wrench designed for hydraulic steering rack repair. Allows safe removal and installation of the gearbox nut in Jeep Grand Cherokee (1992-1998) models without damage.
Product code: MS00087
Steering rack bearing bushing nut sucket for Kia Carens/Rio/Sephia, 27mm
This wrench is used during hydraulic steering rack repairs for disassembly and assembly of the support sleeve. It facilitates the process while preserving the integrity of the part for further use.
Product code: MS00105
Rotor nut dismounting tool for LEXUS GS/IS
Special tool for safely removing the castle nut securing the steering shaft in LEXUS GS and IS models.
Product code: MS00135
Puller for plastic sleeves, Skoda Fabia, VW Polo
Puller for plastic sleeves, Skoda Fabia, VW Polo.
Product code: W0005
Sleeve puller, rear beams, BMW E39 sedan
The sleeve puller is used to remove and install the rear axle bushing.
Product code: W0096
Puller screw, M12, 250mm
Screw for bushing and sleeve pullers, M12, 250mm.
Product code: W0101
Press for bushings and silents for hydraulic cylinder 12T
Press for pins and bushings without adapters. Can be used with a hydraulic cylinder.
Product code: C02/0149
Silent remover and installer press with adapters for Movano, Master, Nissan
Press with bushing sleeves for the top link of the swingarm of Opel Movano, Renault Master, Nissan Interstar. Universal press for extruding and pressing pins, metal-rubber sleeves, ball pins and many elements that are within the dimensions of the press.
Product code: C02/0145
Sleeve puller, Golf IV, Audi A3, Skoda Octavia for the sleeve FEBI
Sleeve Puller designed specifically for Golf IV, Audi A3, and Skoda Octavia vehicles, compatible with FEBI sleeves. Ensures a precise and secure grip for effective removal.
Product code: W0172
Adapters for mounting and dismounting the front control arm bolts for Renault, Dacia
These adapters work with our universal press tool (W0099 - Universal press for bolts and sleeves). Adapters for mounting and dismounting the front control arm bolts.
Product code: W0353
Power steering pump puller
This tool facilitates the safe removal of the power steering pump.
Product code: W0430
Puller for rear steering knuckle bushing for KIA and Hyundai
Rear steering knuckle silent puller for KIA, Hyundai.
Product code: W0667
Sleeve puller, Golf IV, Audi A3, Skoda Octavia
Sleeve puller, Golf IV, Audi A3, Skoda Octavia
Product code: W0006
Puller for double-row wheel hub bearings
Puller for double-row wheel hub bearings. Mechanical kit to facilitate work with double-row front and rear axle bearings. The purpose of the puller is to safely remove this type of bearing from the wheel hub.
Product code: W0037
Rear suspension bushing tool Renault Laguna II
Rear suspension bushing tool Renault Laguna II
Product code: W0047
Front arm bushing puller BMW E39
The Front Arm Bushing Puller BMW E39 is a tool designed to remove the front arm bushing from the BMW E39 model.
Product code: W0057
Puller for suspension arm sleeves – front, BMW E 39 M5
This suspension arm sleeves puller is specially designed for BMW E39 535i ;540i M5 ; BMW 7 E38 models. The tool helps technicians to remove the suspension bushing easily and safely without damaging surrounding parts or the bushing.
Product code: W0086
Adapters for press, puller for bolts, Master, Movano, Interstar
Adapters for press, puller for bolts, Renault Master, Opel Movano, Nissan Interstar
Product code: W0098
Universal press for bolts and sleeves
Universal, strengthened press for bolts and sleeves of trailing arms.
Product code: W0099
Sleeve puller, rear beams FIAT Panda 2003-
Suitable for disassembling and assembling the bushings on the car for FIAT Panda models after 2003.
Product code: W0107
Press for dismantling and mounting of lower bolts, IVECO
Press for dismantling and mounting of lower bolts, IVECO
Product code: W0115
Set of adapters for dismantling and mounting of lower bolts, IVECO
The adapter kit is precisely engineered and durable, and allows reliable and efficient removal and installation of lower suspension bolts. Designed to IVECO vehicle specifications to fit perfectly with the lower suspension bolts and allow smooth and safe operations.
Product code: W0116
Press, puller for bolts (W0027, W0102, W0116), Mercedes, VW, Opel etc.
Press, puller for bolts (W0027, W0102, W0116), Mercedes, VW, Opel etc.
Product code: W0133
Wheel hub socket wrench Mercedes, inner diam.: 55mm
Wheel hub socket wrench Mercedes, inner diam.: 55mm.
Product code: W0146
Sleeve puller, rear beams Mercedes Benz S Class W / V 220 and C215 CL
The bushing puller is used to remove and install the rear axle bushing.
Product code: W0157
Press, puller for bolts Renault Master / Opel Movano
Press, puller for bolts Renault Master / Opel Movano + W0160 adapter
Product code: W0161
Press and puller for ball joints Renault, Opel, Iveco, VW, Nissan, Mercedes etc., 20 adapters
Universal press and puller for ball joints Renault, Opel, Iveco, VW, Nissan, Mercedes etc., with 20 adapters. For models manufactured in 2006 and on.
Product code: W0162
Hub Puller VW, Seat, Skoda-Puller with ABS and without ABS
The tool is suitable for removing the wheel hubs of both vehicles with and without ABS. Therefore, it can be widely used when servicing VW, Seat and Skoda models. The tool fits exactly on the hub and provides the right grip to pull the hub off efficiently and safely.
Product code: W0163
Steering rod wrench
Allows the inner tie rod to be removed and installed without removing the rack.
Product code: W0168
Puller arm forward bushing Renault Laguna I
Puller arm forward bushing Renault Laguna I (nr. oe 77 00 824 042)
Product code: W0171
Puller sleeve (only for pressing) of the rear beam Citroen, Peugeot
Puller sleeve (only for pressing) of the rear beam Citroen C4, Peugeot 307.
Product code: W0186
Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot
Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot
Product code: W0195
Bushing puller, Citroen C5
Silent puller, Citroen C5 (sleeve OE no. 352384)
Product code: W0196
Front hub nut wrench for Iveco Daily (2004-2019)
Front hub nut wrench for Iveco Daily (2004-2019).
Product code: W0354
Rear beam sleeve puller Opel Zafira A; Astra G ; Combo ; Meriva A (oe number 402644)
This rear beam sleeve puller is designed to assist installing and removing bushings directly on the vehicle. Built to be compatible with various Opel models, it provides a tight fit and smooth operation, eliminating potential damage to the bushing or vehicle.
Product code: W0371
Puller sleeve rear beam Renault Megane II; Scenic II; Grand Scenic II (oe sleeve 7701479190)
The Puller sleeve rear beam is a specialized tool to assist in the assembly and disassembly of rear beam bushings. This puller is specially designed for Renault Megane II, Scenic II and Grand Scenic II models.
Product code: W0379
Lower kingpin puller for Jeep Cherokee, Grand Cherokee, Wrangler
This lower kingpin puller is designed for the knuckle pin assembly and disassembly, specifically for use on the car's bottom. It ensures efficient and safe operations for Jeep models.
Product code: W0399
Puller of bushings of the front control arm Volkswagen T4
The puller is used to install and remove control arm bushings on the car.
Product code: W0427
Rear beam bushing puller for Mercedes S-Class (W220) CL-Class (C215)
The rear beam bushing puller is a specialized tool designed to remove the rear beam bushings from Mercedes-Benz S-Class (W220) and CL-Class (C215) vehicles. The rear beam bushings are essential components of the rear suspension system, and they help provide stability and control to the rear axle assembly.
Product code: W0453
Puller sleeve rear beam Front Bmw Series 5,6,7 / F 10, F11, F12, 13, F01 (33316790573, 33 31 6 775 780)
This tool is a great help in installing and removing the bushing. Puller sleeve rear beam is a high quality tool specially designed for Bmw Series 5,6,7 / F 10, F11, F12, 13, F01 models. This tool fits the vehicle perfectly and guarantees perfect operation and durability.
Product code: W0488
Rear beam sleeve puller, Bmw Series 5,6,7 / F 10, F11, F12, 13, F01 (33 31 6775792, 33 31 6 793 864)
This puller helps you safely and efficiently remove the bushings that attach to the rear axle. The purpose of the tool is accurate and powerful removal, minimizing the risk of injury and facilitating service work.
Product code: W0490
Ball joint and silent block remover/installer set
Suitable for any passenger car, utility trucks and SUV vehicles, in which the ball joints have an interference fit. The tools allow for easy removal and installing without large-scale demounting.
Product code: MG50042
Puller for wheel hub / bearing VW Polo, Seat, Skoda, Audi A2-puller with ABS and without ABS
This puller is specifically designed to handle wheel hubs and bearings on VW Polo, Seat, Skoda, and Audi A2 vehicles. Whether your vehicle is equipped with ABS or without ABS, this versatile tool ensures a secure grip and effortless removal.
Product code: W0306
Front control arm bush puller Renault Laguna, Espace, Trafic, Opel Vivaro
Front control arm bush puller for Renault Laguna, Espace, Trafic, and Opel Vivaro. Compatible with OE bushings No. 82 00 002 869. Ideal for bushing removal and installation.
Product code: W0326
Adapters to bolts down Jeep - Cherokee, Grand Cherokee, Wrangler
Product code: W0398
Puller for wheel hub / bearing Ford Focus II, C-Max, Volvo, Mazda 3,-puller with ABS and without ABS
This tool is designed for the assembly and disassembly of wheel hubs and bearings on the car, compatible with both ABS and non-ABS systems.
Product code: W0305
Rear beam bushing puller for Renault Laguna II (for non-factory bushings with flat back)
This rear beam bushing puller is designed specifically for Renault Laguna II, making the removal of non-factory bushings with a flat back efficient and safe.
Product code: W0329
Puller for front control arm pins of Renault Master, Opel Movano
Puller for front control arm pins of Renault Master, Opel Movano
Product code: W0045
Adapter for mounting pin BMW 3 and Z 3 (BMW E36) BMW 31126758510
The Adapter for Mounting Pin BMW 3 and Z3 is a specialized tool designed to facilitate the precise installation or pressing of pins in BMW 3 Series and Z3 models. This adapter is specifically designed to work with a hydraulic or manual press, ensuring a secure and accurate pin installation process.
Product code: W0707
Steering Knuckle Nut Wrench for Mercedes Actros, Axor, Antos, Arocs
This wrench is designed for unscrewing the steering knuckle nut of specific Mercedes trucks. It offers a precise fit and is compatible with both OEM and certain aftermarket parts.
