Pneumatic CV boot installation tool (8bar)
Product code: JBM52994
Brand: JBM
- Debrecen: 1
- Budapest: 2
Product description
Description
The CV boot installation tool is to be used solely for the stretching of flexible CV boots onto drive-shaft assemblies of automotive vehicles. The air adaptor may be exchanged if necessary. The body is threaded to accept 1/4" BSP connector.
Usage
1. Slide boot onto the arms, large end first. The arms should just protrude from the small end of the boot. To fit a boot to an inner joint, turn the boot inside out before sliding it onto the CV boot installation tool’s arms.
2. Press “+” button until arms open enough to pass over the joint. Keep hands clear of moving parts.
3. The air line can now be disconnected. The arms will remain open until the Minus button is pressed.
4. Place this tool over CV joint and press release Minus button. Keep hands away from moving parts.
5. Slide the boot from this tool onto the axle and withdraw the CV boot installation tool over the joint, leaving the boot in position. Complete the installation in the normal way.
Technical data
- Working pressure: 72-130Psi
- Dimensions: 460 x 140 x 140mm
- Maximum joint diameter: 120mm
Product packing
| Pack number | Dimensions | Weight |
|---|---|---|
| 1 | 46 x 15 x 14 cm | 2.37 kg |
Delivery fee
| Delivery method | Gross price |
|---|---|
| Pickup in Nagytarcsa | 0,00 € |
| Pickup in Debrecen | 0,00 € |
| DHL Worldwide Express | 82,70 € |
