Steering and suspension tools

Steering and suspension tools that make replacing and fixing different parts of a vehicle's steering and suspension system easier and less time-consuming

Products

Universal silent and bearing puller kit, 24pcs

Universal silent and bearing puller kit, 24pcs

This professional tool set is designed for the removal and installation of bushings, silent bearings, hydraulic bearings and seals, etc.

Product code: DK-230581

Discount: 10% (until 31/05/2025)
Gross price: 83,69 € 75,32 €
You save: 8,37 €
🟢 In stock
Drive shaft impact socket set, 12pt 30-36mm, hex 14-19mm, 8pcs

Drive shaft impact socket set, 12pt 30-36mm, hex 14-19mm, 8pcs

A professional-grade drive shaft impact socket set, including 12-point sockets (30–36mm) and hex sockets (14–19mm), designed for heavy-duty applications.

Product code: MG93301

Gross price: 25,32 €
🟢 In stock
Power steering pump pulley service kit, 7pcs

Power steering pump pulley service kit, 7pcs

7-piece power steering pump pulley service kit for removing and installing pulleys with 1-1/8", 1-1/4", 1-5/16", and 1-3/8" hubs. Compatible with Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles.

Product code: MG94042

Gross price: 11,29 €
🟢 In stock
Silent block puller for BMW E38, E39, E60, E63, E65, E53, X5, Z8 passanger cars

Silent block puller for BMW E38, E39, E60, E63, E65, E53, X5, Z8 passanger cars

Extractor for removing and fitting the silent block on the rear axle link arm on BMW passanger cars.

Product code: W0087

Gross price: 50,24 €
🟢 In stock
Puller for suspension arm mounting bushes in VW Golf III, Passat, Vento, Corrado

Puller for suspension arm mounting bushes in VW Golf III, Passat, Vento, Corrado

Puller for suspension arm mounting bushes in VW Golf III, Passat, Vento, Corrado. Only suitable for these models.

Product code: W0010

Gross price: 56,68 €
🟢 In stock
Sleeve puller for Ford Mondeo MK 4 (2007- ), Volvo rear swingarm

Sleeve puller for Ford Mondeo MK 4 (2007- ), Volvo rear swingarm

Tool for assembly and disassembly of the sleeve without the need to disassemble the swingarm.

Product code: W0364

Gross price: 197,92 €
🟢 In stock
Bushing puller for the rear control arm of Renault suspensions

Bushing puller for the rear control arm of Renault suspensions

Sleeve puller for rear control arm of Renault Clio II, Thalia, Twingo II, III.

Product code: W0079

Gross price: 37,96 €
🟢 In stock
Sleeve puller for Opel rear beams

Sleeve puller for Opel rear beams

Rear bushing puller for Zafira B, Astra H, Meriva. For the assembly and disassembly of sleeves in cars.

Product code: W0372

Gross price: 105,08 €
🟢 In stock
Bushing installer press for Audi A4 Avant 94-01 rear beam (only for pressing)

Bushing installer press for Audi A4 Avant 94-01 rear beam (only for pressing)

Silent installer press for Audi A4 Avant 94-01 rear beam (only for pressing).

Product code: W0421

Gross price: 37,92 €
🟢 In stock
Opel rear axle bushing removal tool (OE: 4 02 952, 54 02 637)

Opel rear axle bushing removal tool (OE: 4 02 952, 54 02 637)

Opel Astra H, Zafira B, Meriva B rear axle bushing removal tool (OE: 4 02 952, 54 02 637)

Product code: W0652

Gross price: 50,00 €
🟢 In stock
CV boot band pliers

CV boot band pliers

For stainless steel CV boot bands. Also for bands, where special torque has to be used, Volkswagen, Audi, Opel, Ford

Product code: MG50111

Gross price: 18,40 €
🟢 In stock
Pneumatic CV joint boot install tool

Pneumatic CV joint boot install tool

This pneumatic CV joint boot install tool makes installation fast and easy. It prevents boot damage and ensures a tight fit. Simply adjust the air control switch and place over the CV joint. Lubricate before use. Working pressure: 5-9bar. Perfect for auto mechanics!

Product code: MG04B1085

Gross price: 38,60 €
🟢 In stock
CV Boot Tool

CV Boot Tool

CV Boot Tool is allows the convenient and efficient installation of rubber bells on the half-axle of the vehicle.

Product code: MG04B1099

Gross price: 8,50 €
🟢 In stock
Adjustable Steering Rod Wrench, 1/2", 25-55mm

Adjustable Steering Rod Wrench, 1/2", 25-55mm

The 1/2" Drive Steering Rack Wrench is used to loosen or tighten the bolts and nuts that secure the steering rack to the vehicle's chassis. The tool is designed with a 1/2" drive socket that allows it to fit over the nuts and bolts with ease. The wrench is typically adjustable, allowing it to fit various sizes of nuts and bolts.

Product code: MG04B3042

Gross price: 17,77 €
🟢 In stock
Inner tie rod master tool kit with 12 adaptors

Inner tie rod master tool kit with 12 adaptors

Inner tie rod master tool kit with 12 adaptors. Long socket and crowfoot design for easy removal and installation without removing the rack. Includes crowsfeet sizes from 29mm to 42mm and 1-3/16" to 1-1/2".

Product code: MG91049

Gross price: 35,42 €
🟢 In stock
Axial joint tool, 27-42mm

Axial joint tool, 27-42mm

Axial joint tool, 27-42mm can be used to remove and attach the axial joints.

Product code: MG50444

Gross price: 8,62 €
🟢 In stock
Axial joint tool, 33-42mm

Axial joint tool, 33-42mm

High-quality axle joint installation tool, specially designed for quick and efficient removal and installation of vehicle axle joints. Thanks to its 1/2" drive, the tool is easy to use with many manual and pneumatic wrench systems.

Product code: MG50443

Gross price: 9,13 €
🟢 In stock
Axial joint puller 35-45mm

Axial joint puller 35-45mm

Suitable for quick and easy removal/installation of the steering knuckle. Clamping size 35-45mm, length 400mm, hexagon end 27mm (1/2"DR)

Product code: MG50045

Gross price: 19,42 €
🟢 In stock
Wishbone lever tool, sliding type, lockable at 5 points

Wishbone lever tool, sliding type, lockable at 5 points

The device helps to ensure that the swingarms are stably and securely fixed, only they are maintained or installed.

Product code: MG50417

Gross price: 37,83 €
🟢 In stock
Socket wrench key for Citroen and Peugeot swingarms

Socket wrench key for Citroen and Peugeot swingarms

Socket wrench key for Citroen Berlingo, C4 and Peugeot 307, 308, 5008 swingarms.

Product code: W0362

Gross price: 25,39 €
🟢 In stock
Show more products
This site uses cookies to offer you a better browsing experience. Find out more on how we use cookies. If you continue to use this site without explicit acceptance, we will assume that you accept only essential cookies.