
Pressing screw for hub and pulley of power steering pump (М8×1,25)
Product code: MS00129
Brand: MSG





Product description
The MS00129 pressing screw is a specialized tool designed for securely press-fitting a hub or a pulley onto the shaft of a power steering pump. With an M8×1.25 internal thread, this tool is intended to be used in combination with the MS00126 base unit, forming a complete assembly toolset that ensures precise and efficient mounting.
Thanks to its universal design, the MS00129 is compatible with power steering pumps across all vehicle makes and models. It is especially useful during the reassembly phase after pump repair, helping to avoid damage to components and ensuring correct alignment.
To operate this tool, nut wrenches sized 17 and 27 are required.
Specification | Value |
---|---|
Wrench size, mm | 17 |
Thread diameter 1, mm | M8×1.25 |
Thread diameter 2, mm | M16×1.5 |
Thread length 1, mm | 35 |
Total thread length, mm | 110 |
Total bolt length, mm | 125 |
Product packing
Pack number | Dimensions | Weight |
---|---|---|
1 | 0 x 0 x 0 cm | 0.15 kg |
Delivery fee
Delivery method | Gross price |
---|---|
Pickup in Nagytarcsa | 0,00 € |
Pickup in Debrecen | 0,00 € |
DHL Worldwide Express | 61,67 € |
More products in this category

Specialized Straight Crown Wrench for Steering Gear Nut Removal – Jeep Grand Cherokee (1992-1998)
A specialized straight crown wrench designed for hydraulic steering rack repair. Allows safe removal and installation of the gearbox nut in Jeep Grand Cherokee (1992-1998) models without damage.
Product code: MS00087

Specialized tool for removal of the steering gear nut for Mitsubishi L200, Pajero models
A specialized tool for hydraulic steering rack repair, designed for safe disassembly of the gearbox nut. Prevents damage while loosening or tightening.
Product code: MS00085

Wrench for dismantling Mercedes Benz oil filter 84mm; Angle 14
This special wrench for disassembling the oil filter is specially designed for certain models of Mercedes-Benz and Chrysler. The 84mm x 14kt size and 1/2" drive ensure it fits the filter perfectly, making it easy to remove or replace the filter.
Product code: W0737

Nut cap for Goldhofer THP/SL4 trailer; 6 teeth, teeth inside
The Nut Cap with 6 internal teeth and a tooth distance of 107 mm is a specialized component used in Goldhofer THP/SL4 semi-trailers to secure and maintain critical parts of the trailer's assembly.
Product code: W0726

Rubber hose for A/C chargers, red, 6m
Flexible red rubber hose for A/C chargers with 1/4 SAE couplings, 6 meters long.
Product code: 0TG074CR056

Timing tool set BMW N62, N73 engines
Timing tool set BMW N62 engines; N62TU; N73 / PETROL V8 3.6/4.0/4.4/4.8 N62/N62TU + 6.0 V12 N73 timing chain
Product code: W0252

Valve Lapping Tool Attachment, 6 parts
Using a Valve Lapping Tool Attachment to grind the valves.
Product code: MG04A2269A

Steering Rack Bearing Bushing Nut Socket for Chevrolet Aveo
Specialized nut socket for the installation and removal of the steering rack bearing bushing. Designed for hydraulic steering rack repairs, ensuring safe disassembly and reassembly of the support sleeve.
Product code: MS00077

Pneumatic injector and bearing puller set, 35pcs
Pneumatic injector puller set with air hammer, 35pcs is a specialized tool set designed for removing injectors from automotive engines using pneumatic power.
Product code: MG99091

Timing tool set Volkswagen Touareg, Phaeton 5.0 V10 TDI
Timing tool set Volkswagen Touareg, Phaeton 5.0 V10 TDI
Product code: W0276

Turbocharger tester kit, 9pcs
A 9-piece turbocharger tester kit designed to detect air leaks and cracks in intercooler tubes and pipes, featuring 8 conical adapters (35-80mm), a pressure gauge (0-70psi), and quick-connect regulating and discharge valves.
Product code: MG90150

Steering Rack Side Nut Wrench for Opel models
This specialized wrench is designed for quick and efficient installation or removal of steering rack side tightening locknuts. It ensures safe operation by eliminating the risk of damaging the locknut during use. Manufactured by MSG Equipment, the tool is compatible with various Opel models.
Product code: MS00006

Wrench for upper nut of worm gear steering rack for Toyota Corolla 2002-2007
Specialized nut socket for efficient and safe installation/removal of the upper nut of the worm gear in steering racks. Suitable for Toyota Corolla (2002-2007).
Product code: MS00031

Pressing screw for hub and pulley of power steering pump (М8×1,25) for MS00125 tool
A special tool for press-fitting a hub or a pulley on the power steering pump shaft. The tool is universal and applicable to all vehicle makes and models. The purpose of the tool is to assist in the pump assembly after its repair.
Product code: MS00056

Fitting for testing power steering pump on a test bench for Honda Accord, CR-V
Fitting for diagnosing power steering pumps on a test bench. Compatible with multiple OEM part numbers and suitable for Honda Accord (2003-2008) and Honda CR-V (2001-2012).
Product code: MS00070

Hydraulic steering rack support sleeve wrench for Subaru models
Specialized wrench designed for the disassembly and assembly of the support sleeve in hydraulic steering racks of Subaru vehicles. Ensures precise work while preserving part integrity.
Product code: MS00107

Hydraulic steering rack retaining ring installer (d26)
Universal tool for installing and removing hydraulic steering rack piston retaining rings. This tool ensures easy and efficient installation or removal of retaining rings securing the piston to the steering rack rod.
Product code: MS00119

Bearing nut wrench for hydraulic steering rack repair for Citroen, Peugeot models
Specialized wrench for disassembling, assembling, and adjusting the side preload nut in hydraulic steering racks. Precision-fit for select Citroën and Peugeot models.
Product code: MS00136

Rotor position sensor puller for electric steering racks
The puller is designed for the safe dismantling of the steering rack rotor position sensor. It provides preserving the integrity of the rack and sensor, eliminates deformation and other types of damage during dismantling.
Product code: MS00143

Special wrench for installation/removal of ball screw bearing nuts of steering racks
Precision tool for securing the ball screw pulley during bearing locknut removal in electric steering rack repairs. Fits various Audi, BMW, Ford, and other models.
Product code: MS00144

Test bench for diagnostics of power steering racks
The MS502M test bench is designed for hydraulic power steering (HPS) rack diagnostics, allowing real-time performance simulation and detection of faults like leaks, packing seal wear, unit body damage, and Teflon ring deterioration.
Product code: MS502M

Test bench for diagnostics of alternators, starters and voltage regulators (12/24V,200A/100A,6kW,400V)
MS002 COМ – multifunctional test bench designed for the quick and the accurate diagnostics of the automotive alternators and starters of the passenger cars and the light commercial vehicles.
Product code: MS002 COM

Shaft seals installer (d26)
A specialized tool for installing seals on hydraulic steering rack rods, ensuring a secure fit without damage. Designed for shafts with a 26mm diameter, this tool simplifies the repair process and prevents seal deformation.
Product code: MS00122

Tool for air spring sleeve spreading
Efficient tool for repairing air spring bellows, designed to fit universal air spring sleeves with a 140 mm diameter.
Product code: MS20003

Wrench for upper nut of worm gear steering rack for Nissan Navara, Pathfinder models
Specialized tool for quick and safe installation/removal of the upper nut of the worm gear in steering racks. Designed for Nissan Navara (D40) and Pathfinder (R51), ensuring quality repair.
Product code: MS00033

Oil drain pan, 15l
Oil drip tray is constructed of high quality, recyclable polythene plastic that is resistant to corrosion so your oil pan will remain durable for carrying oil, gasoline, and antifreeze. 450mm x 145mm
Product code: DK-230533-15

Specialized tool for removal of the steering gear nut for Jeep Grand Cherokee models
A specialized tool designed for hydraulic steering rack repair in Jeep Grand Cherokee models (1992-1998). Allows safe removal and installation of the gearbox nut without damage.
Product code: MS00086

ATF fluid extractor and dispenser, pneumatic, 8L
Our pneumatic ATF fluid extractor and dispenser with a capacity of 8L is a must-have for any mechanic. Prevent spills and control fluid flow easily with the volume guide. Equipped with safety release and various adapters for different transmissions.
Product code: MG04B1091

Wrench for installation/removal of ball screw bearing nuts of steering racks, Lexus LS
This wrench is used in electric steering rack repair to unscrew the ball screw bearing locknut, ensuring the integrity of rack components during disassembly.
Product code: MS00155

Timing tool set for Renault
Timing tool set for Renault 16v engines. Laguna, Safrane, TDC 2.0, 2.5 16v 1996-2001
Product code: MG50620

Valve stem seal pliers
For replacing valve stem seals.
Product code: MG50106

Steering rack shaft polishing machine
The MS402 polishing machine is designed for grinding and polishing steering rack shafts and other cylindrical components. It removes corrosion and ensures precise surface roughness. Works with 900mm max shaft length and operates at 1500 RPM.
Product code: MS402

Piston ring compressor 6", 60-175mm
6" piston ring compressor. Ø 60-175mm
Product code: JBM52697

Piston ring compressor 3", 53-175mm
3" piston ring compressor. Ø 53/175mm
Product code: JBM52696

Specialized nut socket for installation/removal of bearing bushing of steering rack
A specialized nut socket designed for the precise installation and removal of support bushings in hydraulic steering racks, ensuring component integrity during maintenance.
Product code: MS00068

Cylinder pressure test set
A tester that allows you to quickly and easily diagnose leaks in the combustion chamber.
Product code: G02735

Cam belt tension gauge
The timing belt tension indicator can be used to adjust the timing belt movement in ranges of 1daN to 10daN.
Product code: CKB01597

Valve stem seal pliers
For valve stem seal replacement
Product code: MG50106A

Wrench for wheel bearing nut, rear axle, Mercedes Sprinter, VW LT
A tool designed for the removal and installation of rear axle wheel bearing nuts.
Product code: W0236

Timing lock for BMW 1.6 N43, B16, B20 engines
Timing lock for BMW 1.6 N43, B16, B20 engines.
Product code: C01/0024

Air conditioning compressor clutch removal set
A/C compressor clutch removal set for cars (GM, Ford, Chrysler).
Product code: CKB04040

Pneumatic ATF fluid extractor / dispenser 10l
Pneumatic fluid changer for replacing oil in automatic gearboxes and differential gearboxes. The set includes 13 adapters for a wide range of automatic gearboxes (VAG, BMW, Ford and Mercedes-Benz)
Product code: CKB03689

Fuel pump wrench for Volkswagen Crafter 2006-2016
The Fuel Pump Wrench Volkswagen Crafter 2006-2016 is a specially designed wrench ideal for loosening the fuel pump nut. This key is made of high quality material and perfectly fits Volkswagen Crafter 2006-2016 vehicles. Thanks to its ease of use, you can easily and quickly carry out the necessary maintenance work.
Product code: W0483

Camshaft lock for BMW M60, M62 engines
Camshaft lock for BMW M60, M62, 730i, 740i, 535i, 540i, 735i, 740i, 840i, X5 engines.
Product code: C01/0039

Lock nut wrench for KM16 locknuts
Lock nut wrench for KM16 locknuts. O.D.: 109mm. I.D.: 97.6mm.
Product code: W0624

Face mill cutter for Fiat 1.4 16V shafts
This face mill is specially designed for cutting and preparing Fiat 1.4 16V engine shafts. The cutting diameter of the tool is 32 mm, which is the ideal size for machining the front surface of Fiat 1.4 16V engine shafts. Thanks to the M12x1 thread size, it fits easily to shafts with the appropriate thread.
Product code: W0699

Face mill for crankshaft, VW TDI 1.9, 2.5
Face mill for the crankshafts of VW TDI 1.9, 2.5 engines.
Product code: W0017

Adapter + screw of injector puller, Mercedes CDI, VW TDI; Bosch
The tool allows the safe and efficient removal of injectors from the respective engines.
Product code: W0029

Timing tool set Ford 1.6, 1.8, 2.5 D and TD
Timing tool set Ford 1.6, 1.8, 2.5 D and TD
Product code: W0128

Adapter for injector valve pulling Opel DTI - diesel
Adapter for injector valve pulling Opel DTI - diesel
Product code: W0226

Tool for fitting and removing stretch ribbed belts
This tool is a versatile and essential tool for fitting and removing stretch ribbed belts. This specialized tool is designed to simplify the process of working with stretch ribbed belts.
Product code: W0267

Key variator Volkswagen
On Volkswagen vehicles, the variator key (CVT variator tool) is a special tool used to disassemble or maintain the continuously variable transmission (CVT) variator. The variator key helps to disassemble and assemble the variator unit, which is responsible for the operation of the transmission.
Product code: W0290

Key clutch disc air conditioning Denso 23 mm (hardened)
Product code: W0448

Valve spring extractor adapter 8V
A special tool designed to remove valve springs in 8 valve engines.
Product code: W0442

Bearing nut socket wrench, KM 12, internal pins
Bearing nut socket wrench with internal pins. For KM12 M60 x 2 nuts.
Product code: W0510

Universal belt tensioner wrench set
Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm
Product code: MG50635B

Glow plug reamer, 7mm
Tool for reaming broken glow plug shafts. Diameter: 7mm. Length: 11cm.
Product code: W0632

Puller for rear steering knuckle bushing for KIA and Hyundai
Rear steering knuckle silent puller for KIA, Hyundai.
Product code: W0667

Socket wrench for lock nuts, KM14
Designed for safe and easy tightening and loosening of lock nuts.
Product code: W0694

Adapter for mounting pin BMW 3 and Z 3 (BMW E36) BMW 31126758510
The Adapter for Mounting Pin BMW 3 and Z3 is a specialized tool designed to facilitate the precise installation or pressing of pins in BMW 3 Series and Z3 models. This adapter is specifically designed to work with a hydraulic or manual press, ensuring a secure and accurate pin installation process.
Product code: W0707

Lock nut socket wrench, KM3
Outer diameter: 32mm, inner diameter: 25mm, teeth: 3.6mm, length 45mm.
Product code: W0718

The key to loosening the nut of crankshaft bearings for motorcycles DKW SB other models
Product code: W425K

Glow plug reamer, 8mm
The 8mm diameter, 11cm long Chisel for glow plug reamer is a specialized tool that removes deposits between glow plugs and sockets. It is recommended to use it before installing new glow plugs to clean the sockets of the glow plugs. This router bit can be used universally on most types of vehicles with M9x1 thread glow plug sockets.
Product code: W0698

Forming Gas Leak Detector
Leak detector for forming gas (5% H₂ + 95% N₂), with flexible probe, LED bar, buzzer alarm, adjustable sensitivity, and carry case.
Product code: BGS3401

Blind Hole Bearing Puller Set, 15pcs
15-piece puller set for removing bearings from blind holes, ideal for gearbox repairs and other tight-fit applications.
Product code: BGS70108

Socket / Wrench For grooved bearing nuts KM 13 ; teeth from the inside
This socket wrench is tailored to fit grooved bearing nuts of KM 13 type. It has teeth on the inside to ensure a snug grip on the bearing nut, allowing for efficient loosening and tightening.
Product code: W0727

Timing tool set for Ford
For 1.6 Ti-VCT, 2.0 TDCi engines, Focus, C-Max
Product code: MG50305

Rotor nut dismounting tool for LEXUS GS/IS
Special tool for safely removing the castle nut securing the steering shaft in LEXUS GS and IS models.
Product code: MS00135

Puller sleeves for the left front beam Ford Focus II; III; C-Max; Volvo
Puller sleeves for the left front beam in Ford Focus II, III, C-Max, and Volvo S40 II, V50. For mounting and removing bushings directly on the car. Compatible with OE bushings: FM-FOC4, 1695011, 1355621, 23032, 30666042.
Product code: W0369

Universal silent block removing and installing kit, 34-84mm
Spindle: M10xP1.5, M12xP1.75, M14xP2.0, M16xP2.0, length/Ø A 44/34, 46/36, 54/44, 56/46, 58/48, 66/56, 68/58, 70/60, 78/68, 80/70, 84/72, B 48/38, 50/40, 52/42, 60/50, 62/52, 64/54, 72/62, 74/64, 76/66mm
Product code: MG50093

Automotive short and open circuit finder
Automotive short and open circuit finder is a tool designed for diagnosing electrical issues in DC circuits. It is used to quickly identify short circuits, locate open circuits, perform wire identification, and trace wires within the electrical system of a vehicle.
Product code: MG04D7003

Wrench for upper nut of worm gear steering rack for Lexus, Toyota and VW models
Specialized nut socket for efficient and safe installation/removal of the upper nut of the worm gear in steering racks, compatible with select Lexus, Toyota and VW models.
Product code: MS00020

Steering rack bearing bushing nut socket for SsangYong models, 36mm
This specialized 36mm nut socket is designed for removing and installing the bearing bushing of hydraulic steering racks, ensuring precise disassembly and assembly while preserving part integrity. Compatible with SsangYong Actyon, Kyron, and Rexton models.
Product code: MS00101

Glow plug puller set
Glow plug puller set for removing glow plugs attached to the engine. Comprehensive kit for removing stubborn glow plugs. Ideal for removing plugs that have been unscrewed but jammed due to build-up or where the filament is distorted.
Product code: MG04A6033

Bearing puller set, 9pcs
It’s ideal for removing small gears, wheels, and fittings from shafts also can be used to replace the steering pump, perfect for wiper arm assembly, rebuilding your alternator, removing tightly fitted pulleys, and reaches places that regular gear pullers can’t access.
Product code: DK-230590

Engine timing tool set for Ford (1.0 EcoBoost engines)
Engine timing tool set for Ford 1.0 EcoBoost engines. Essential for setting and locking the engine and adjusting variable cam timing units. Suitable for Ford B-MAX, C-MAX, EcoSport, Fiesta, Focus, Grand C-MAX.
Product code: MG91784

Viscous Clutch Key Ford Transit 2.3 2.4 3.2 (2001 – 2006)
This viscous clutch key is specifically designed for tightening or loosening the viscous clutch on Ford Transit vehicles. It is an ideal tool for precise and efficient maintenance, ensuring the proper functioning of the clutch.
Product code: W0416

Valve sping puller adapter 20V
This specialized adapter is designed for use with valve spring pullers on 20-valve engines.
Product code: W0441

Timing Lock Set for Mercedes 2.0, 2.1, 2.2 CDI
Ensure precise and efficient engine maintenance with the Timing Lock Set, specifically designed for Mercedes-Benz 2.0, 2.1, and 2.2 CDI engines. This tool is essential for securing engine components during timing adjustments, ensuring accurate alignment and preventing potential damage.
Product code: W0477

Adapter for loosening stuck M14x1 injectors
Hardened adapter for loosening stuck M14x1 injectors. Designed for durability and precision.
Product code: W0536

BMW N20/N26 Balancer Shaft Lock + Oil Pump Gasket Repair Kit
Balancer shaft lock and oil pump gasket repair kit for BMW N20/N26 engines. Compatible with BMW 1, 2, 3, 4 Series, X1, X3, X4, and Z4 models (2011-2017) with 1.6L/2.0L petrol engines.
Product code: W0618

DPF Cleaning machine (on-car)
DPF Cleaning machine (on-car) is a device used to clean the DPF (Diesel Particulate Filter) directly in the car. The machine uses special technology to help clean and remove accumulated dirt and particles from the DPF.
Product code: AD3030S

Valve Spring Compressor Set, 7pcs
Compresses valve springs for seal or spring replacement. Fits most SOHC and DOHC engines. Includes 7 components.
Product code: BGS8255

Oil Pressure Test Kit
Oil pressure diagnostic kit with gauge and multiple adaptors. 0–10 bar scale. For detecting leaks in oil systems.
Product code: BGS98007

Test bench for diagnostics of brake calipers
The MS301 test bench is designed for diagnostics of brake calipers of passenger cars and light commercial vehicles. The bench allows you to determine the tightness of the unit by creating hydraulic pressure in it.
Product code: MS301

Test bench for diagnostics of alternators and starters
The MS005A is a multifunctional test bench for quick and precise diagnostics of automotive alternators and starters in passenger cars and trucks. It supports 12V, 24V, and 48V belt starter generators controlled via CAN bus.
Product code: MS005A

Tester for diagnostics of power steering system
The MS510 tester is used for diagnosing the hydraulic power steering system by determining the pressure generated by the vehicle's power steering pump in different operating modes (with load and without).
Product code: MS510

Test bench for diagnostics of power steering pumps
Test Bench MS504 is used for evaluation of the technical condition and output characteristics of mechanically driven single- and double-circuit pumps. The bench simulates operation of the tested unit in a car.
Product code: MS504

Test bench for diagnostics of alternators, starters and voltage regulators (12/24V, 100A/50A, 4kW, 230V)
MS004 COМ – multifunctional test bench designed for the quick and accurate testing of 12/24V alternators, starters, and voltage regulators in passenger cars and light commercial vehicles.
Product code: MS004 COM

Tester for diagnostics of alternator's voltage regulators
The MS012 COM tester enables accurate diagnostics of 12/24V voltage regulators independently from alternators. It simulates alternator operation to evaluate regulator performance and determine the correct replacement.
Product code: MS012 COM

Tester for diagnostics of electromagnetic valves and clutches of vehicle air conditioner compressors
A compact tester for evaluating electromagnetic clutches and control valves in automotive climate systems, ensuring quick and accurate diagnostics.
Product code: MS121

Steering rack bushing tool for Honda models
Specialized tool for safely mounting and dismounting steering rack bushings, preserving aluminum alloy nuts. Compatible with Honda Accord VIII sedans and wagons. Work with this device is carried out with a wrench.
Product code: MS00023

Steering rack adjusting tool for side nuts for Lexus, Mazda and Toyota models
Effortlessly mount, dismount, and adjust side tightening nuts of steering racks without deformation. Compatible with various Lexus, Mazda, and Toyota models.
Product code: MS00029

Steering Rack Side Nut Wrench for Nissan and Samsung models
Specialized tool for easy and safe installation, removal, and adjustment of the steering rack side tightening nut. Designed to prevent nut damage and ensure smooth maintenance for various Nissan models and Samsung SM5 (A32).
Product code: MS00034

Steering Rack Side Nut Wrench for MITSUBISHI LANCER IX
Specialized tool for easy installation, removal, and adjustment of the steering rack side tightening nut. Designed for Mitsubishi Lancer IX models, ensuring damage-free maintenance.
Product code: MS00035

Steering Rack Side Nut Wrench for Ford USA Probe, Mazda 626 III, IV and Xedos 6 models
Specialized tool for the installation, removal, and adjustment of the steering rack side tightening nut. Designed for Ford Probe II and Mazda 626 III, IV and Xedos 6 models, ensuring precise and damage-free maintenance.
Product code: MS00036

Steering rack bushing tool for Ford and Nissan models
Specialized tool for quick installation and removal of steering rack bearing bushings. Manufactured by MSG Equipment, designed for Ford and Nissan models, ensuring efficient and deformation-free maintenance.
Product code: MS00039

Pressing screw for hub and pulley of power steering pump (BSW 3/8") for MS00126 tool
A special tool for press-fitting a hub or a pulley on the power steering pump shaft. The tool is universal and applicable to all vehicle makes and models. The purpose of the tool is to assist in the pump assembly after its repair.
Product code: MS00057

Set of fittings for connection of steering rack to a test bench for Audi A4, A5, A8, Q5 models
A set of fittings for securely connecting steering racks to a test bench, designed for diagnostics of steering rack technical conditions, compatible with specified Audi models.
Product code: MS00061

Steering Rack Bearing Bushing Nut Socket for Hyundai Tucson, KIA Sportage
Specialized nut socket for installing and removing the bearing bushing of the steering rack. Designed for hydraulic steering rack repairs, ensuring precise disassembly and assembly of the support sleeve.
Product code: MS00071

Steering rack bearing bushing crown socket for Great Wall Hover and Opel Frontera
Specialized nut socket for installing and removing the bearing bushing of the steering rack. Designed for hydraulic steering rack repairs, ensuring precise disassembly and assembly while preserving the part’s integrity.
Product code: MS00073

Steering rack bushing tool for Seat and VW models
This specialized wrench is an essential tool for hydraulic steering rack repairs. It simplifies the disassembly and assembly of the support sleeve, ensuring the part remains intact and undamaged for future use.
Product code: MS00078

Steering Gear Side Preload Nut Wrench
A specialized adjusting nut socket designed for the precise disassembly, assembly, and adjustment of the side preload nut in hydraulic steering racks. It ensures secure operation while preserving the integrity of the nut.
Product code: MS00089

Tool for mounting and dismounting of steering rack pinion bottom nut
An external star wrench designed for mounting and dismounting the steering rack pinion bottom nut in electric power steering racks. Ensures secure tightening and loosening without damaging the nut.
Product code: MS00090

Specialized nut socket for installation/removal of bearing bushing of steering rack
A specialized nut socket designed for disassembling and assembling the support sleeve during hydraulic steering rack repairs. Ensures safe and precise work while preserving the integrity of the part.
Product code: MS00091

Steering rack worm gear upper nut socket, 36mm
Designed for electric power steering racks, this wrench removes or installs the worm mechanism's upper nut without causing damage. Designed for Alfa Romeo, Fiat, Ford, Honda, Jeep, and Lancia vehicles
Product code: MS00102

Steering rack bearing bushing nut sucket for Kia Carens/Rio/Sephia, 27mm
This wrench is used during hydraulic steering rack repairs for disassembly and assembly of the support sleeve. It facilitates the process while preserving the integrity of the part for further use.
Product code: MS00105

Steering rack nut removal wrench for Acura, Honda, Mazda models
The MS50117-EPS wrench is designed for steering rack repairs with electric power assist. It ensures safe disassembly of couplings and shafts from the rack housing while preserving the nut's integrity.
Product code: MS00117

Shaft seals installer (d30)
A specialized tool for installing seals on hydraulic steering rack rods, ensuring a secure fit without damage. Designed for shafts with a 30mm diameter, this tool simplifies the repair process and prevents seal deformation.
Product code: MS00124

Swivel Vise for shock absorbers and steering racks
Swivel vise for safe and efficient assembling and disassembling of shock absorbers and steering racks.
Product code: MS20002

Blind Hole Bearing Puller Set with Slide Hammer, 5pcs
5-piece puller set for removing bearings and bushings from blind holes. Includes slide hammer.
Product code: BGS8598

Wheel Bearing Mounting Disc Set, 52 pcs
52-piece set for mounting bearing shells, seals, and bushings. Ø18–65 mm + 74 mm discs. Usable with press or hammer.
Product code: BGS98467

Brake Disc Lathe Machine (Two-Functions)
Brake Disc Lathe Machine (Two-Functions) is specialized model to offer dual functionality. It has the feature of grinding both on the vehicle and outside with additional apparatuses to the existing disc lathe machine.
Product code: FDT7000

Bearing puller set, 14pcs
Designed for pulling bearing off shaft and separating bearing housings.
Product code: DK-230589

DPF Cleaning machine (on-car)
DPF Cleaning machine (on-car) is a device used to clean the DPF (Diesel Particulate Filter) directly in the car. DPF is a system in diesel engines that helps reduce harmful exhaust gas emissions with the particulate filter. The machine uses special technology to help clean and remove accumulated dirt and particles from the DPF.
Product code: AD3030

Timing tool set for VW, Audi
Crankshaft locking tool, camshaft locking tool, panel removal tool, shock absorber tool, ribbed belt tensioner, for 2.8 V30, 2.7 Turbo, 4.2 V40, 4.2, 5.2 FSI, 2.4, 2.6, 2.7, 2.8, 4.2, 6.0 petrol engines, 2.5, 2.7, 3.0 TDI, 3.0 TDI CR
Product code: MG50356

Injection nozzle socket set
25, 27, 28, 29, 30mm Siemens, Bosch, for Peugeot and Citroen 2.0 HDI engines
Product code: MG50604

Key / nut for the bearing nut KM 9 , studs internal
This wrench is specifically designed to fit the KM 9 groove nut with teeth on the inside.
Product code: W0564

Timing tool set for Land Rover, Jaguar
For 2.7TD V6 engines
Product code: MG50307

Petrol engine compression tester kit
A Petrol engine compression tester kit is a tool that can be used to check the tightness and performance of engine pistons in the combustion chamber.
Product code: MG50192

Bearing separator set
Bearing separator set, capacity 30-50mm, 50-75mm, 2 separators, 1 forcing screw, 4X2 extensions
Product code: MG50132

Clutch centering mandrel, 2pcs
2pcs clutch centering mandrel, Ø20-26mm, Ø15-19mm
Product code: JBM53392

Universal belt tensioner wrench set
Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm
Product code: JBM52832

21pcs 12 point socket set. Sizes: 8-36mm
Suitable for both metric and inch (SAE) standard 6 point Torx and 12 point screws.
Product code: G13547

Adapter set for gearbox fluid change (ATF)
Adapter set for gearbox fluid change (ATF).
Product code: G02733

Bearing and gear puller with 3 jaws. Working range: up to 10" (254mm)
Bearing and gear puller with 3 jaws. Working range: up to 10" (254mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.
Product code: G02245

Wire terminal release set 23pcs
Wire terminal release set 23pcs. For removing terminals from electrical connectors of BMW, Mercedes, VW, Audi, Jaguar, Porsche, Saab, Skoda, Ford, Renault, Citroen, Chrysler, Flat, Honda, Mazda, Mitsubishi, Toyota, Opel, Seat brand cars.
Product code: CKBD2035

Oil cap socket set with ratchet and wrench
A set for unscrewing oil filter caps.
Product code: CKB04111

Injector puller for VW 2.0 TDI engines
Injector puller for VW 2.0 TDI engines.
Product code: C04/0093

Timing lock for BMW N40, N45 engines
Timing lock for camshafts and variators for BMW N40, N45, N45T (B16) 2001-2009 engines.
Product code: C01/0096

Timing lock for BMW M42, M44, M50, M52, M54, M60, M62 engines
Timing lock for BMW M42, M44, M50, M52, M54, M60, M62 engines.
Product code: C01/0053

Timing lock for BMW M60, M62 engines
Timing lock for BMW M60, M62, 730i, 740i, 535i, 540i, 735i, 840i, X5 engines.
Product code: C01/0038

Camshaft lock for VW 2.5 TDI 5-cylinder diesel engines
Camshaft lock for VW, Audi 2.5 TDI 5-cylinder diesel engines.
Product code: C01/0020

Injection pump wrench for VW, Audi TDI engines
Injection pump wrench for VW, Audi TDI engines.
Product code: W0040

Slide hammer M12/16, ⌀85mm, weight 1,3 kg
A slide hammer can be a useful tool when installing or removing fasteners that are difficult to move or fit tightly. The large diameter and weight of the M12/16 slide hammer allows for greater impact force, which can more effectively drive in or squeeze out these elements.
Product code: W0048

Service wrench for initial chamber 1/2", 60mm
Service wrench for initial chamber 1/2", 60mm
Product code: W0081

Sleeve puller, rear beams, BMW E39 sedan
The sleeve puller is used to remove and install the rear axle bushing.
Product code: W0096

Wrench for injection pumps, hexagon 24mm, universal
Wrench for injection pumps, hexagon 24mm, universal.
Product code: W0109

Camshaft locking tool BMW Common Rail 2.0 d, 3.0d (TU)
Camshaft locking tool BMW Common Rail 2.0 d, 3.0d (TU) with rack and pinion drive wheels.
Product code: W0126

Hub Puller VW, Seat, Skoda-Puller with ABS and without ABS
The tool is suitable for removing the wheel hubs of both vehicles with and without ABS. Therefore, it can be widely used when servicing VW, Seat and Skoda models. The tool fits exactly on the hub and provides the right grip to pull the hub off efficiently and safely.
Product code: W0163

Crankshaft pulley puller VW / Audi 4 and 5 cylinder
Engineered specifically for the removal of crankshaft pulleys in certain VW and Audi vehicles. Ensures smooth and damage-free extraction of crankshaft pulleys, a vital component in the engine's belt system.
Product code: W0173

Rocker arm nut wrench for Citroen, Peugeot
Rocker arm nut wrench for Citroen XM, Xantia X1i, X2, C5 I / II , Peugeot 405 I / II ,406 ,605 ,607 cars.
Product code: W0194

Timing tool set, Volvo / Ford 2.5 Turbo petrol
Timing tool set, Volvo / Ford 2.5 Turbo petrol
Product code: W0197

Crankshaft locking tool Opel 3.0 CDTI
The Crankshaft Locking Tool for Opel 3.0 CDTI is a specialized tool used to lock the crankshaft in place when working with the crankshaft pulley during maintenance or repair tasks on Opel vehicles equipped with the 3.0 CDTI diesel engine.
Product code: W0286

Timing lock for Ford 1.25, 1.4, 1.6 16V engines
Timing lock for Ford 1.25, 1.4, 1.6 16V engines.
Product code: W0332

Lock camshaft Chrysler 2.8L Diesel after 2007
Lock camshaft Chrysler 2.8L Diesel after 2007
Product code: W0355

Timing lock for BMW 2.5, 3.0 petrol engines: N51, N52, N52K, N53, N54
Timing lock for BMW 2.5, 3.0 petrol engines with chain: N51, N52, N52K, N53, N54.
Product code: W0382

Timing lock for Opel EcoFlex 1.0, 1.2, 1.4 16 valve engines (2009 and on)
Timing lock for Opel EcoFlex 1.0, 1.2, 1.4 16 valve engines (2009 and on).
Product code: W0383

Camshaft lock for Mercedes 2.0, 2.1, 2.2 CDI
A camshaft lock tool for Mercedes 2.0, 2.1, and 2.2 CDI engines is a specialized tool used to lock the camshafts in place during maintenance or repair procedures. These engines are commonly found in various Mercedes-Benz models.
Product code: W0386

Key clutch disc air conditioning Denso 22 mm (hardened)
Product code: W0447

BMW crankshaft pulley turning tool
BMW crankshaft pulley turning tool for M47, M57, N47, N57.
Product code: W0498

Socket wrench for KM10 lock nuts, 78.5mm
Socket wrench for KM10 lock nuts, 78.5mm, hexagonal drive
Product code: W0507

Crankshaft holding wrench Opel 1.6 SIDI
Crankshaft holding wrench for Opel Cascade, Astra J, Zephyr C, Insignia 1.6 Turbo SIDI, SIDI Turbo, EcoFLEX petrol.
Product code: W0511

Lock nut socket wrench, grooved, KM7
Lock nut socket wrench, grooved, KM7.
Product code: W0545

Key / nut for the bearing nut KM 8 , studs internal
This wrench is specifically designed to fit the KM 8 groove nut with teeth on the inside.
Product code: W0567

Timing tool set for BMW N45 B20 SI engines
Timing tool set for BMW N45 B20 SI with camshaft adjuster is a special tool developed for BMW N45 B20 SI engines, which helps to fix and stabilize the engine control unit during maintenance or repair work.
Product code: W0653

Injection pump puller 1.4, 1.6, 2.0 TDI CR
Removes the high pressure diesel pump on VAG Group 1.4, 1.6 and 2.0 TDI CR engines. OEM: T10489.
Product code: W0656

Glow plug reamer, 11mm
Tool for reaming broken glow plug shafts. Diameter: 11mm. Length: 11cm.
Product code: W0634

Fuel solenoid wrench, Ford Ford 1.8i, 2.0, 2.2, 2.4 TDCi, TDDDi
Injection pump wrench, Ford Ford 1.8i, 2.0, 2.2, 2.4 TDCi, TDDDi. 1/2" square drive.
Product code: W0706

Puller (32x1,25) To pull sprocket a chain and the sleeve damper crankshaft in the DKW SB 350, NZ 250, NZ 350, F8 other model
Product code: W426K

Socket / Wrench For lock nuts, KM 18
The socket wrench is designed for safe and easy tightening and loosening of lock nuts.
Product code: W0722

Camshaft pulley locking tool - VW 1.8 / 2.0 TFSI
The Camshaft Pulley Locking Tool for VW 1.8/2.0 TFSI is a precision-engineered device designed to assist in the maintenance and repair of gasoline engines equipped with direct injection technology, particularly the 1.0, 1.8, and 2.0 TFSI engines commonly found in Audi, Seat, Skoda, and VW vehicles.
Product code: W0723

Timing lock Opel 1.2, 1.2L-T (RPO LIH)
Designed specifically for the Opel 1.2 1.2L-T (RPO LIH) engine, guaranteeing exact alignment and fit during use.
Product code: W0731

Steering Knuckle Nut Wrench for Mercedes Actros, Axor, Antos, Arocs
This wrench is designed for unscrewing the steering knuckle nut of specific Mercedes trucks. It offers a precise fit and is compatible with both OEM and certain aftermarket parts.
Product code: W0735

Crankshaft locking kit for Ford Transit 2.2 TDCi
By securing the crankshaft and flywheel in position, it ensures that the TDC (Top Dead Center) sensor can be accurately set, especially crucial after its removal when working on the cam chain drive system.
Product code: MG91722

Engine timing tool set for Audi (2.0, 2.8, 3.0 engines)
This comprehensive Engine Timing Tool Set is specifically designed for Audi vehicles, providing all the necessary tools for alignment, adjustment of the camshaft, and replacement of the timing chain.
Product code: MG91666

Rear axle bushing press for Toyota Yaris, Passo, Echo
The Rear Axle Bushing Press is designed to facilitate the installation or replacement of rear axle bushings in Toyota Yaris, Passo, and Echo models. Rear axle bushing press for Toyota Yaris, Passo, Echo. Bushing
Product code: W0720

Diesel engine locking set for VAG (1.2, 1.4, 1.9 belt driven engines)
This diesel engine locking set is designed for VAG (Volkswagen Auto Group) vehicles equipped with 1.2D, 1.4D, and 1.9D TDi PD (Pumpe Duse) engines featuring hydraulic belt tensioners.
Product code: MG91637

Engine timing tool set for PSA, Toyota (1.0, 1.2 VTi Pure-Tech engines)
This tool set is meticulously crafted for timing belt replacement on PSA 1.0 and 1.2 VTi Pure-Tech three-cylinder belt drive petrol engines. It is essential to working on compatible Citroën, Peugeot, and Toyota models, ensuring precise timing adjustments.
Product code: MG91785

Brake and clutch fluid vacuum bleeding pump, 3L+1L
It is designed to maintain the hydraulic system of the brake system and clutch.
Product code: MG93683

Universal drum and disc brake tool set, 15pcs
This 15-piece universal drum and disc brake tool set is a comprehensive kit designed for the replacement and cleaning of front and rear brakes on various car models. This set includes a wide range of tools to handle different aspects of brake maintenance and repair.
Product code: MG97012

Engine timing tool set for Fiat, Alfa Romeo, Lancia (1.2, 1.4 engines)
This tool set is curated for the specific requirements of Fiat, Alfa Romeo, and Lancia vehicles equipped with 1.2 and 1.4 engines. It is an indispensable kit for everyone undertaking belt replacement and other timing-related tasks on these vehicles, encompassing both early and later variants of these engines.
Product code: MG98071

Engine timing tool set for VAG (1.6, 2.0 TDi engines)
This comprehensive tool set is specifically designed for the popular 1.6 and 2.0 VAG TDi CR diesel engines found across various VAG ranges from 2012 onwards. It's an essential toolkit for the removal and fitting of the camshaft drive belt, ensuring the engine's timing is accurately maintained.
Product code: MG98511A

Engine timing tool set for BMW (N43)
This tool set is meticulously tailored for BMW vehicles equipped with the N43 engine. It is a comprehensive kit designed for checking, adjusting, and setting camshaft timing, as well as removing and replacing the cam chain.
Product code: MG98515

Engine timing tool set for BMW (N51/N52/N53/N54/N55)
This tool set is specifically designed for a wide range of BMW 2.5 and 3.0 chain drive, six-cylinder, twin camshaft petrol engines. It is tailored for use with N51/N52/N52K Valvetronic engines and N53/N54/N55 direct injection engines.
Product code: MG98519

Flat staples for hot stapler 0.8mm
Flat staples for hot stapler ø=0.8mm wire, 100pcs
Product code: 804076

Wave staples for hot stapler, 0.8mm
Wave staples for hot stapler ø=0.8mm wire, 100pcs
Product code: 804078

Timing tool set for BMW, Mini, PSA (N13, N18 engines)
Suitable for BMW, Mini Cooper N13 and N18 engines for locking camshaft. The set contains tools for locking the camshaft and the crankshaft.
Product code: MG04A2233

Timing tool set for VW, Audi, Skoda, Seat
It helps to avoid damages of valves and pistons. Suitable for models with 1.0L 3 cylinder engines and 1.2L/1.4L engines.
Product code: MG04A3059

Timing tool set for BMW, Land Rover
This timing lock set is designed for BMW and Land Rover vehicles, featuring components essential for locking the camshaft and crankshaft, tensioning the timing belt, removing the injector pump, and adjusting the chain tension. It's suitable for a wide range of engine types, including 4 and 6 cylinder 2.0D 16V, 1.8, 2.0, 2.5, 3.0D, 5.2 TD, and TDS engines.
Product code: MG50374

Wrench for injection pumps, hexagon 17mm
Wrench for injection pumps, hexagon 17mm, guidance diam. 16mm, triangular fixing
Product code: W0110

Fuel pump lock ring removal tool, adjustable 100-180mm
Fuel pump lock ring removal tool, adjustable 100-180mm.
Product code: W0721

Universal Brake Piston Reset Tool Set, 8pcs
This 8-piece set includes unique adjustable 2-pin, 3-pin, and 4-pin adapters along with a 3/8" adapter with a magnet. Designed for both clockwise and left-handed use, it allows for a centered reset of the brake piston, preventing tilting and avoiding damage to boots, pistons, and piston bores in the brake caliper.
Product code: MG94015K

Inner tie rod master tool kit with 12 adaptors
Inner tie rod master tool kit with 12 adaptors. Long socket and crowfoot design for easy removal and installation without removing the rack. Includes crowsfeet sizes from 29mm to 42mm and 1-3/16" to 1-1/2".
Product code: MG91049

Brake and clutch system extractor, refiller and bleeder, 2l
Pneumatic brake and clutch system extractor, refiller, and bleeder with a 2L capacity. Designed for standard and ABS brake systems, featuring an integrated silencer, adjustable swivel clamp, and long silicone hoses for convenience.
Product code: MG93680D

Engine timing tool set for Audi, VW (2.0, 2.8, 3.0 TFSI engines)
Specialized engine timing tool set for Audi and VW 2.0, 2.8, 3.0 TFSI engines. Essential for aligning camshafts when adjusting timing in models including Audi A6, Q5 2.0T, A6L 3.0T.
Product code: MG98516A

Oil drainer with vacuum cleaner
This is an innovative and highly efficient product tailored for diverse applications in the automotive, heavy-duty, industrial, marine and farm sectors. This tool is designed to revolutionize the way you handle oil and fluid changes, providing a cleaner, safer, and more environmentally friendly method of draining and disposing of used oil.
Product code: LN-ODT30-E

Danfos drier filter for air conditioner charger
Danfoss drier filter for air conditioner charging systems, featuring a Spin 162 1/4" connection with a 100% molecular sieve desiccant, designed for Group II refrigerants. PS: 45 bar, TS min/max: -40℃/+120℃.
Product code: 0AA025CR000

Rubber hose for A/C chargers, blue, 6m
Flexible blue rubber hose for A/C chargers with 1/4 SAE couplings, 6 meters long.
Product code: 0TG075CR056

Tool for hub removal (set of 15 screws)
Tool for hub removal – cars of A, B, C class and others. Set of 15 screws.
Product code: W0072

Valve sealing install set, 6mm, 7mm, 8mm, universal
Valve sealing install set, 6mm, 7mm, 8mm, universal
Product code: W0059

Universal sliding hammer hub puller, with 15 screws
Universal sliding hammer hub puller with 15 screws, ideal for removing seized hubs. The tool weighs 13kg and comes with three types of 5 screws for various applications. Size range: 90mm-155mm (±5mm), with an external flange dimension of 185mm.
Product code: W0002

Double-row bearing puller and wheel hubs II version (BMW, Mercedes etc.)
Double-row bearing puller and wheel hubs II version (BMW, Mercedes etc.)
Product code: W0205

Timing tool set, Mini Cooper (06-10) 1.6 Diesel
This timing lock tool is specifically designed for Mini 1.6 Diesel engines.
Product code: W0209

Rear beam bushing puller for BMW X5 E53
Rear beam bushing puller (No. oe 33 17 6 770 456) for BMW X5 E53
Product code: W0246

Shaft puller for manual gearbox, Fiat Ducato 2.8 JTD
Shaft puller for manual gearbox, Fiat Ducato 2.8 JTD
Product code: W0253

Timing tool set Lancia Kappa 5 cyl. 2.0 20v (Silver)
Timing tool set for Lancia Kappa 5-cylinder 2.0 20V engines. Silver edition for precise engine timing.
Product code: W0271

Oil pump setting tool for Ducato, Iveco, Citroen Jumper - 2.3 Diesel Common Rail
Oil pump setting tool for 2.3 Diesel Common Rail engines in Fiat Ducato, Iveco, Citroen Jumper, and Peugeot Boxer. Diameter: 80mm (outer), 50mm (inner). Suitable for models after 2006.
Product code: W0278

Cam lock Fiat Bravo / Brava / Marea, Lancia Delta / Debra 1 set. - Petrol 1.8 16V 115 KM (dark green)
Cam lock tool set for Fiat Bravo, Brava, Marea, and Lancia Delta, Dedra with 1.8 16V 115 HP petrol engines. Dark green edition for precise timing alignment.
Product code: W0299

Front control arm bush puller Renault Laguna, Espace, Trafic, Opel Vivaro
Front control arm bush puller for Renault Laguna, Espace, Trafic, and Opel Vivaro. Compatible with OE bushings No. 82 00 002 869. Ideal for bushing removal and installation.
Product code: W0326

Front control arm bushing puller Renault Clio II; Renault kangoo I; Thalia I (7700424399 )
Front control arm bushing puller for Renault Clio II, Kangoo I, and Thalia I. Suitable for mounting and dismounting both bushings in the swingarm.
Product code: W0337

Injector key for Volkswagen, 24mm
Volkswagen injector key, 24mm, designed for precise removal and installation of unit injectors in VW cars.
Product code: W0365

Tool for setting TDC (Top Dead Center) for Volkswagen 2.5 TDI
A specialized tool for accurately setting the Top Dead Center (TDC) position on Volkswagen 2.5 TDI engines. Suitable for Touareg 2003 and Transporter 2004 models with 5-cylinder diesel engines.
Product code: W0374

Key for assembly, disassembly and locking of the pulley wheel for BMW M52 / M54 / M56
Key for assembly, disassembly, and locking of pulley wheels for BMW M52/M54/M56 engines. Fits various models and pulley diameters (32mm inner, 194mm & 129mm outer).
Product code: W0458

Camshaft drive belt pulley puller for VW, Audi
Camshaft drive belt pulley puller for VW, Audi, 17mm and 23mm puller arms
Product code: MG50329

Adapter for loosening stuck M12x1 injectors
Hardened adapter for loosening stuck M12x1 injectors. Ensures safe and efficient removal of seized injectors.
Product code: W0531

Engine timing tool kit for VW, Audi TSI, TFSI 1.8/2.0
A set used for the correct blocking and setting of the timing in 4-cylinder EA888 1.8 R4 16v TSI/TFSI, 2.0 R4 16v TSI/TFSI 2006-2013 VAG petrol engines in the TSI, TFSI EA888 engine series (1.8/2.0).
Product code: CKB10188

Spark plug thread repair kit, 14mm
Spark plug thread repair kit is suitable for damaged spark plug threads, cleans and rethreads spark plug ports. A spark plug thread repair kit is used to repair damaged or stripped threads in the cylinder head.
Product code: MG04A6019

Axial joint tool, 27-42mm
Axial joint tool, 27-42mm can be used to remove and attach the axial joints.
Product code: MG50444

Axial joint tool, 33-42mm
High-quality axle joint installation tool, specially designed for quick and efficient removal and installation of vehicle axle joints. Thanks to its 1/2" drive, the tool is easy to use with many manual and pneumatic wrench systems.
Product code: MG50443

Wheel Bearing tool VW
Bearing installation and removal tool for 85mm bearings. Application Volkswagen Touareg, Transporter, Multivan & T5
Product code: MG50432A

Timing tool set for Opel, Suzuki
For 1.3 CDTI, DDIS diesel engines with timing chain
Product code: MG50310

Vacuum and pressure gauge
Measuring range (pressure) 0.1bar, 14, 18mm coupling adapter
Product code: MG50190

CV Boot Clamp Pliers, 184mm
CV Boot Clamp Pliers, 184mm 1/2" holes on the handles can be used as keys.
Product code: MG50110

Brake rewind tool set, 21pcs
This 21-piece tool set is a powerful tool to properly rotate and push the piston back into the caliper during brake maintenance or replacement tasks. The set is suitable for many vehicles, making it a versatile addition to any workshop.
Product code: MG50061

Brake fluid tester
Brake fluid tester is designed to analyze the amount of moisture content within the brake system.
Product code: MG04D7012

5PCS Wire Loom Threading Kit
The 5PCS Wire Loom Threading Kit is a set of tools designed specifically for automotive wiring tasks. It includes various pieces that facilitate the threading and routing of wires through harnesses and grommet holes.
Product code: MG04C2006

Steel line stopper kit, 8pcs
This kit is designed to provide solutions for various applications involving fuel lines, flare type steel brake lines, fuel and AC lines, banjo fittings on brakes and power steering, as well as transmission cooler lines.
Product code: MG04B4106

6pcs brake bleeder socket & wrench set
The 6pcs brake bleeder socket & wrench set helps to drain the oil easily, and with the help of different sizes of wrenches, the brake oil drain screws can be easily removed, so maintenance work will be faster and more efficient.
Product code: MG04B4105

10pcs double pipe flaring tool set
The pipe flaring is particularly important for the installation of brake pipes used in the brake system, where precise and safe fitting is essential. It can also be a useful tool for air conditioner pipes.
Product code: MG04B4092A

Brake pressure test kit
Brake pressure test kit is a comprehensive kit for accurate brake pressure measurement, suitable for testing front and rear brakes.
Product code: MG04B4055

Hand held vacuum pump
A multifunction vacuum diagnostic tool with robust compact design.
Product code: MG04B4028

Pneumatic CV joint boot install tool
This pneumatic CV joint boot install tool makes installation fast and easy. It prevents boot damage and ensures a tight fit. Simply adjust the air control switch and place over the CV joint. Lubricate before use. Working pressure: 5-9bar. Perfect for auto mechanics!
Product code: MG04B1085

Spring compressor set
For the removal and fitting of suspension springs on all types of McPherson struts with conical and cylindrical springs on the front and rear axle. 65-125mm, 88-160mm, 125-215mm
Product code: DK-230579A

Pneumatic fluid extractor, 9-liter
9-Liter Pneumatic Fluid Extractor a versatile and efficient tool designed for effortless fluid extraction. This extractor offers both automatic operation using standard shop air and manual operation using a hand pump, providing flexibility and convenience for various applications.
Product code: MG04A5117

Ignition adjustment stroboscope lamp
This ignition adjustment stroboscope lamp is an important tool in car repair, especially for diagnosing and repairing problems related to the ignition system. A strobe light can be used to precisely adjust the mechanical or electronic glow system to match engine speed, resulting in greater fuel efficiency and improved performance.
Product code: MG04A6014

Oil filter chain wrench
Oil filter chain wrench
Product code: MG04A5098

Brake piston wind back tool set, 18pcs
Designed to push back or wind back brake pistons. Includes left-handed and right-handed thrust bolt assemblies.
Product code: DK-230542

Cooling system vacuum purge and refill kit, 6pcs
A cooling system vacuum purge and refill kit is used for servicing a vehicle's cooling system. The kit helps to remove any air pockets or bubbles that may be trapped in the cooling system, which can cause the engine to overheat.
Product code: MG04A4010

Injector gasket puller
For the extraction of copper sealing gaskets and washers within injector seats.
Product code: MG04A3079

Fuel line connector pliers
Fuel line connector pliers is suitable for releasing connections on fuel pipes during maintenance or when replacing fuel filters. It is designed to compress the quick connect lugs for easy removal without damaging the connector.
Product code: MG04A3034

Timing tool set suitable for VAG 1.6 - 2.0 TDI CR engines (2012-)
This Timing Tool Set is compatible with a diverse lineup of VW Group vehicles, ensuring it covers a broad spectrum of popular models.
Product code: MG04A2184

Exhaust backpressure test kit
The tool allows auto mechanics and vehicle owners to easily check that the exhaust system is working properly and that there are no issues with exhaust backpressure.
Product code: MG04A2167

Exhaust pipe rubber ring mounting tool set, 2pcs
Two T-handle tools allow for easy installation of exhaust assemblies. The product consists of 1 piece with a straight end and 1 piece with a hook end to fit the block and ring holders.
Product code: MG04A2086

Oil drain plug socket set of 23pcs
Oil drain plug socket set, 23 pieces for quick and easy oil change.
Product code: DK-122303

Timing lock for Citroen, Peugeot, Opel 1.2 Vti (VVT), GDI
This tool kit makes it easy to change the timing belt without having to disassemble multiple components. Allows you to determine if the belt needs to be replaced without having to disassemble the engine.
Product code: C01/0230A

Brake Fluid Tester
Compact brake fluid tester with 4 LED indicators. Compatible with DOT3, DOT4, DOT5.1 fluids.
Product code: BGS67241

Timing tool set for VAG
For 1.6, 2.0 TDi CR, fifth generation Common Rail diesel (Blue Motion) engines.
Product code: MG50618

Spark/Glow plug and oxygen sensor master service set, 11pcs
Forged Chrome Vanadium master service set for the professional. Includes all the sockets and extensions required to remove/install sprak/glow plugs and oxygen sensors on most modern vehicles.
Product code: MG92585

Engine timing tool set for VAG (EA888 engine)
The VAG EA888 engine timing tool set ensures precise camshaft and crankshaft alignment for Mk5, Mk6, B6 CC, A3, A4, A5, A6, Q5, TT 2.0 T engines. Made from high-quality steel, it guarantees durability and performance.
Product code: MG94111B

Crankshaft pulley set for Jaguar, Land Rover (3.0L V6, 5.0L V8 engines)
Designed for use with Jaguar and Land Rover vehicles equipped with 3.0L V6 and 5.0L V8 petrol engines. Facilitates the removal of the front crankshaft pulley (crankshaft vibration damper).
Product code: MG95604

Pneumatic injector puller set, 21pcs
Pneumatic injector puller set, 21pcs is a specialized tool set designed for removing injectors from automotive engines using pneumatic power. The set includes a pneumatic puller, a black BMC (Blow Molded Case) for storage, and color stickers for organization and identification.
Product code: MG98782

Puller for wheel hub / bearing Ford Focus II, C-Max, Volvo, Mazda 3,-puller with ABS and without ABS
This tool is designed for the assembly and disassembly of wheel hubs and bearings on the car, compatible with both ABS and non-ABS systems.
Product code: W0305

Water Pump Pulley Remover VW / AUDI
This tool is specifically designed for the removal of the water pump pulley during the timing belt replacement process.
Product code: W0328

Rear beam bushing puller for Renault Laguna II (for non-factory bushings with flat back)
This rear beam bushing puller is designed specifically for Renault Laguna II, making the removal of non-factory bushings with a flat back efficient and safe.
Product code: W0329

Front control arm bush puller Renault Laguna II; Espace IV ( nr oe 8200002868; FE22821 )
This tool is used for mounting and dismounting the bushing.
Product code: W0334

Crankshaft Locking Wrench Ford Mondeo, Transit 2.0 2.2 2.4 3.2 Duratorq TDCi (01-)
The Crankshaft Locking Wrench for Ford Mondeo and Transit 2.0, 2.2, 2.4, and 3.2 Duratorq Di, TDDi, and TDCi diesel engines (2001 onwards) as well as the 2.3 Duratec Petrol engine is a specialized tool designed to hold the crankshaft in a fixed position during maintenance or repair work.
Product code: W0407

Puller Magneto 139FMB 4T ENDURO CROSS; CHOPPER KING, JOLLY LOS etc.
This puller features a ball end and an M28x1 right-hand thread.
Product code: W0395

Injector puller 2.0 HDI
The injector puller for the 2.0 HDI engine with a 12 mm lug spacing is a specialized tool designed for removing fuel injectors.
Product code: W0411

Front Sledge Bush Puller for MERCEDES ML W163
The front sledge bush puller is specifically designed for Mercedes ML W163 models, suitable for the removal and installation of front suspension bushings. This tool allows for efficient work directly on the vehicle, simplifying and speeding up the maintenance process.
Product code: W0428

Timing lock BMW N53 Vanos ,BMW N54 Vanos
Ensure accurate and efficient engine maintenance with the Timing Lock tool, specifically designed for BMW N53 and N54 engines equipped with VANOS. This tool is essential for securing engine components during timing adjustments, ensuring precise alignment and preventing potential damage.
Product code: W0475

Rear axle silent puller
The rear axle silent puller is a special tool used to remove and install the metal-rubber bushings in the rear suspension of vehicles on various Honda and Rover models (Honda Civic, CR-V, Concerto, CRX, Rover 200).
Product code: W0485

Hub and Bearing Puller for Fiat Ducato and Citroen Jumper
This hub and bearing puller is specifically designed for Fiat Ducato and Citroen Jumper vehicles, allowing for the quick and efficient mounting and dismounting of hubs and bearings on the vehicle without the need to disassemble the suspension.
Product code: W0499

Crankshaft lock Fiat Opel 1.9 D; 1.9 TD; 1.9 JTD; 2.4 JTD
The Crankshaft Lock for Fiat Opel 1.9 D, 1.9 TD, 1.9 JTD, and 2.4 JTD engines is a specialized tool designed to assist in precise and safe engine maintenance. The crankshaft lock ensures the crankshaft remains fixed in place, preventing any unintended movement during the disassembly or assembly process.
Product code: W0691

Lock nut socket wrench, KM17
Designed for safe and easy tightening and loosening of lock nuts.
Product code: W0700

Lock nut socket wrench, KM15
A hardened socket wrench with 4 gripping claws for KM15 bearing retaining locknuts KM15. Inner diameter: 90mm. Hex drive.
Product code: W0701

Camshaft Lock BMW M62 Vanos
Camshaft lock tool for BMW M62 VANOS engines (1999-2002). OEM Number: 116452, 116451.
Product code: W0543

Fiat injector puller Citroen, Iveco 2.2 TDCI, HDI, JTD
Injector puller for 2.2 TDCI, HDI, and JTD engines in Citroen, Peugeot, Fiat, Ford, and Iveco vehicles. Ideal for Citroen Jumper, Peugeot Boxer, Fiat Ducato, Ford Transit, and Iveco models.
Product code: W0556

Injector puller for Citroen Jumper, Peugeot Boxer, Fiat 2.3 JTD HPI
Injector puller for 2.3 HPI, JTD, and HDI engines in Citroen, Peugeot, Fiat, and Iveco vehicles. Compatible with Citroen Jumper, Peugeot Boxer, Fiat Ducato Power, and Iveco Daily models.
Product code: W0560

Key / nut for the bearing nut KM 4 , studs internal
Tempered key/nut for bearing nut KM4 with internal studs, 43mm outer diameter, 28.3mm inner diameter.
Product code: W0570

Timing lock Jaguar 2.0 GTDi, Land Rover 2.0 Si4
Timing lock tool kit for Jaguar 2.0 GTDi and Land Rover 2.0 Si4 engines. Includes camshaft lock, shaft pulley lock, flywheel lock, shaft sensor lock, and shaft lock. Compatible with specific Jaguar and Land Rover models.
Product code: W0578

Flywheel and shaft pulley lock Renault Nisan 1.4, 1.6 , 2.0, 2.3
Flywheel and shaft pulley lock tool for Renault and Nissan vehicles with 1.4, 1.6, 2.0, 2.3, 2.5, and 3.5 engines. Designed for precise and secure engine timing during maintenance.
Product code: W0584

Air conditioning pulley lock wrench Ford C-max , Focus , Kuga
Air conditioning pulley lock wrench for Ford C-Max, Focus, Kuga, and other Ford models. Ensures secure locking of the AC pulley during maintenance. Compatible with models from 2010 and newer.
Product code: W0719

Lock nut wrench for KM 15 locknuts, teeth from the inside
This is a professional quality tool specially designed and developed for easy and efficient tightening or loosening of KM15 size lock nuts. O.D.: 108mm. I.D.: 90.5mm. Teeth from the inside.
Product code: W0743

Ball joint extractor set, 24/27/32/36mm
Ball joint extractor set with sizes 24mm, 27mm, 32mm, and 36mm. Ideal for removing ball joints from various vehicles efficiently.
Product code: MG99075

Torque multiplier set for Ford 1.0/1.1 Ecoboost petrol engines
Pulley bolt torque booster for FORD EcoBoost engines, featuring a 1:5 ratio for precise tightening. Handles up to 1500Nm output torque, compatible with various FORD models and engine types.
Product code: MG98055

Crankshaft pulley lock for Renault, Dacia, Smart 0.9/1.2 engines
A crankshaft pulley lock designed for securing the pulley during loosening and tightening of the pulley bolt in 0.9L and 1.2L petrol engines of Renault, Dacia, and Smart vehicles.
Product code: W0744

Timing tool set for Ford
For 2.0, 2.2, 2.4 TDDI, TDCI, engines with timing chain
Product code: MG50325

Radiator pressure tester kit, 8 adapters
Radiator pressure and leakage tester kit, suitable for almost all car types
Product code: MG50180

Engine timing tool for Renault, Nissan, Opel (2.0, 2.3 DCi/CDTi)
This specialized tool is designed for locking the camshaft and crankshaft in place during timing adjustments, ensuring precision alignment and guaranteeing optimal engine performance.
Product code: MG04A2310

Engine timing tool set for Opel, Saab, Chevrolet (2.0, 2.4 Turbo engines)
A specialized timing tool set for setting and holding camshafts, crankshaft, and chain tensioner components in 2.0 and 2.4 Turbo engines. Suitable for Opel, Saab, and Chevrolet models.
Product code: MG95608

Loosening Tool for Wheel Nut Covers
Removes wheel nut covers without rim damage. Ideal for aluminum rims. Spring steel claws. T-handle design.
Product code: BGS8257

Shock absorber spring compressor, heavy duty, 2.3t
Macpherson spring compression tool. Adjustable 100-265mm. Fits most car models. Drive: 24mm allen.
Product code: MG94227

Universal camshaft bearing tool installation and removal set
Universal camshaft bearing tool set for easy installation and removal of camshaft bearings in various engine types.
Product code: MG91562

Engine timing tool set for BMW B38, B46, B48, B58 engines
13-piece engine timing tool set for BMW and Mini petrol engines (1.2L, 1.5L, and 2.0L). Designed for precise timing chain adjustments and control time settings on models from 2014 onwards.
Product code: MG98303B

Pneumatic brake fluid exchange kit (10 - 40psi)
This brake bleeder kit is suitable for bleeding brake and clutch systems in vehicles with an ABS system.
Product code: MG04B4023

Fuel injector seat and shaft cleaning set
Universal for most diesel engines. The brushes are specially engineered to fit injector seats. Used to remove rust, carbon and other debris from seats and cups without damage.
Product code: MG91089B

Injector tester with adapters
Dual-scale fuel injection tester with a 0–600 bar and 0–8000 PSI measuring range, 750mL fuel tank capacity, and a sleek, transparent design for precise diesel vehicle maintenance.
Product code: MG91571

Camshaft timing tool set for VAG 1.0/1.2/1.4 EA 211 engines
Comprehensive camshaft timing tool set for VAG EA211 engines, compatible with 1.0L, 1.2L, 1.4L turbo, and 2.0L FSi, TSi, TFSi engines. Includes OEM-equivalent tools and versatile adaptors.
Product code: MG91664

Universal silent block hydraulic extractor and installer set
Comprehensive silent block extractor and installer set with hydraulic capability, 44 mandrels (short and deep), power screws, and a hydraulic cylinder for universal automotive applications.
Product code: MG92611A

Extra deep socket set 12pt, 15-19mm
A 5-piece extra deep socket set with 12-point design, covering sizes from 15mm to 19mm, ideal for accessing recessed fasteners and providing secure grip. 1/2" drive.
Product code: MG93247A

Brake caliper socket set, 10pcs for VAG, BMW, Mercedes, Porsche
10-piece brake caliper socket set made from durable CR-MO and 50BV30 steel, compatible with VAG, BMW, Mercedes, Porsche, and more. Includes a range of 10pt, 7pt, Hex, and Metric sockets.
Product code: MG93256A

Camshaft timing tool set for BMW, N42, N46, N46T
Camshaft timing tool set for BMW, N42, N46, N46T
Product code: MG50659

Wrench for air conditioning clutch disc Denso 5SE12C for Toyota cars, 47.5 mm
A durable and precisely engineered tool designed for servicing air conditioning clutch discs in Denso 5SE12C compressors. This hardened wrench ensures secure handling during removal and installation.
Product code: W0745

External snap ring assortment set, 300pcs
A 300-piece external snap ring assortment set, including 18 different sizes ranging from 3mm to 32mm. Made from durable, corrosion-resistant material and organized in a partitioned storage box for easy access.
Product code: AST-3602

Tester for diagnostics of electric power steering units
The MS561 PRO is a professional diagnostic tester for standalone Electric Power Steering (EPS) units, supporting CAN, CAN-FD, and FlexRay protocols. It enables in-depth diagnostics, VIN programming, and error clearing for nearly 4000 car models.
Product code: MS561 PRO

Mechanism for testing hps racks under load
The MS521 mechanism simulates load resistance on HPS/EPS racks, allowing precise fault detection, including leaking valves, worn seals, and cylinder wear. Works with MS502M test bench and MS561 controller.
Product code: MS521

Tester for diagnostics of power steering system
The MS511 tester is designed for diagnosing power steering system components such as steering racks and pumps without removal from the vehicle. It evaluates fluid pressure and flow rate, helping determine if repairs are needed.
Product code: MS511

Test bench for diagnostics and flushing of power steering system
MS503N is a universal test bench for power steering systems operated from 230V mains. The test bench for system flushing and evaluation of the technical condition of a power steering rack or pump.
Product code: MS503N

Universal FlexRay Cable
The MS39000 Universal FlexRay Cable enables diagnostics of FlexRay-controlled EPS units removed from a vehicle. It works with the MS561 PRO tester, providing error reading, real-time data viewing, and control unit analysis with a single cable.
Product code: MS39000

Tester for voltage regulators of alternators
The MS016 tester is a compact multifunctional device for diagnosing 12/24V alternators, Stop-Start alternators, starters, and voltage regulators without removing them from the vehicle. It supports LIN-bus communication analysis and offers precise testing for various alternator types.
Product code: MS016

Test bench for diagnostics of alternators
A compact and versatile test bench for diagnosing 12/24V automotive alternators, including 12V ‘start-stop’ and 24V I-ELOOP models. Features manual and automatic diagnostic modes, smooth speed and load adjustment, and Bluetooth printing capability.
Product code: MS006

Universal valve spring remover and installer kit
A universal valve spring removal and installation kit, designed for replacing valve springs and valve stem seals without removing the cylinder head. Ideal for narrow engine compartments.
Product code: MG94026A

Tester for diagnostics of alternator's voltage regulators
The MS013 COM tester is a compact device for express diagnostics of 12V automotive alternators and voltage regulators, either directly on a vehicle or separately on a test bench.
Product code: MS013 COM

Test bench for diagnostics of brake calipers
The MS300 test bench is designed for diagnosing and repairing brake calipers, including electromechanical parking brakes. It assesses performance, air-tightness, and enables effective repairs.
Product code: MS300

Steering Rack Side Nut Wrench for Citroen and Peugeot models
Specialized nut socket for easy installation, removal, and adjustment of steering rack side tightening nuts, ensuring damage-free and precise repairs. Compatible with select Citroen and Peugeot models. Manufactured by MSG Equipment.
Product code: MS00008

Steering Rack Side Nut Wrench for Lexus and Toyota models
Specialized nut socket for easy installation, removal, and adjustment of steering rack side tightening nuts, ensuring damage-free and precise repairs. Compatible with select Toyota models. Manufactured by MSG Equipment.
Product code: MS00007

Injector Extractor for BMW M47TU, M57, M57TU Engines
Special tool for extracting stuck common rail injectors on BMW engines without cylinder head removal.
Product code: BGS8782

Steering Rack Side Nut Wrench for Dodge, Mercedes-Benz, VW
This specialized nut socket is designed for efficient mounting, dismounting, and adjustment of steering rack side tightening nuts. Manufactured by MSG Equipment, it ensures safe and damage-free handling during steering system maintenance and repair.
Product code: MS00010

Wrench for upper nut of worm gear steering rack for Nissan models
Specialized nut socket for efficient and safe installation/removal of the upper nut of the worm gear in steering racks, compatible with select Nissan models (Murano Z50, Teana J31, 2003-2008).
Product code: MS00018

Wrench for upper nut of worm gear steering rack for Infiniti and Nissan models
Specialized nut socket for efficient and safe installation/removal of the upper nut of the worm gear in steering racks, compatible with select Infiniti and Nissan models.
Product code: MS00019

Steering rack bushing tool for Ford and Mazda models
Specialized tool for safely mounting and dismounting steering rack bushings, preserving aluminum alloy nuts. Compatible with Ford Fiesta V, Ford Fiesta Van, Ford Fusion and Mazda 2.
Product code: MS00024

Wrench for upper nut of worm gear steering rack for Toyota models
Specialized nut socket for efficient and safe installation/removal of the upper nut of the worm gear in steering racks, compatible with select Toyota (Avensis, Echo, Prius, Vitz, Yaris) models.
Product code: MS00026

Fitting for testing power steering pump on a test bench for Audi, BMW, Mercedes, Opel and VW models
A fitting for connecting power steering pumps to a test bench for diagnostics, compatible with a wide range of Audi, BMW, Mercedes-Benz, Opel, and VW models.
Product code: MS00063

Steering rack bushing tool for Lexus GX and Toyota models
Specialized tool for safely mounting and dismounting steering rack bushings. This tool eliminates the risk to damage bushing in the process of its assembling and disassembing. Compatible with Lexus GX (2001-2009) and Toyota models.
Product code: MS00028

Steering gear lock nut removal tool for Hyundai, Mitsubishi and Nissan models
A specialized tool designed to safely remove the steering gear lock nut in select Hyundai, Mitsubishi, and Nissan models, preventing damage during disassembly.
Product code: MS00047

Pressing screw for hub and pulley of power steering pump (BSW 3/8") for MS00125 tool
A special tool for press-fitting a hub or a pulley on the power steering pump shaft. The tool is universal and applicable to all vehicle makes and models. The purpose of the tool is to assist in the pump assembly after its repair.
Product code: MS00055

Fitting for testing power steering pump on a test bench for Mercedes-Benz S-Class and SL models
A fitting for securely connecting power steering pumps to a test bench for diagnostics, compatible with Mercedes-Benz S-Class (W221), S-Class Coupe (C216), and SL (R230).
Product code: MS00062

Set of fitting for testing power steering rack on the test bench
A universal set of fittings for securely connecting a steering rack to a test bench during diagnostics. Includes fittings and clamping plates to minimize mechanical damage, even in heavy-duty operations.
Product code: MS00553

Specialized nut socket for installation/removal of bearing bushing of steering rack
A specialized nut socket designed for the installation and removal of the bearing bushing in hydraulic steering racks. Ensures safe disassembly and reassembly, preserving the part for future use. Compatible with CHERY TIGGO 2005 and newer models.
Product code: MS00067

Specialized Tool for Steering Gear Lock Nut Removal for KIA Sportage models
A specialized tool designed for hydraulic steering rack repair, ensuring safe removal and installation of the steering gear lock nut in KIA Sportage (1994-2004) models.