Puller arm bushings rear axle Ford Galaxy, Seat Alhambra, VW Sharan

Sleeve puller for Opel rear beams

Rear bushing puller for Zafira B, Astra H, Meriva. For the assembly and disassembly of sleeves in cars.

Product code: W0372

Puller arm forward bushing Renault Laguna I (under a hydraulic press)

Puller arm forward bushing Renault Laguna I (under a hydraulic press) (nr. oe 77 00 822 503)

Product code: W0170

Puller arm forward bushing Renault Laguna I

Puller arm forward bushing Renault Laguna I (nr. oe 77 00 824 042)

Product code: W0171

Rear beam bushing puller BMW E32 / E34 (nr. oe 3331112670)

Rear beam bushing puller BMW E32 / E34 (nr. oe 3331112670)

Product code: W0181

Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot

Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot

Product code: W0195

Adapter puller valve springs 8V

Product code: W0442

Key clutch disc air conditioning Denso 47,5 mm (hardened)

Product code: W0446

Lock pulley shaft Volvo (T4, T5) 1.6, 2.0 GDTI

Product code: W0486

Timing lock for Opel, Fiat, Alfa Romeo, Chevrolet 1.4, 1.6, 1.8 16V engines

Tool set for GM 16-valve engines found in Opel, Chevrolet, Fiat and Alfa Romeo models from 2003 to 2014.

Product code: W0497

Timing lock for Opel 1.6 CDTI and EcoFlex CDTI engines (2013 and onwards)

A comprehensive kit to lock the 1.6L diesel engine into its timed position for the removal and replacement of the timing chain.

Product code: W0528

Adapter for loosening stuck M12x1 injectors

Adapter for loosening stuck M12x1 injectors

Product code: W0531

Timing lock for VW LT 2.8 TDI

Timing lock for VW LT 2.8 TDI. Engine codes: AGK, ATA, AUH, BCQ.

Product code: W0532

Device for mounting and dismounting the clutch Audi and VW – DSG

Product code: W0537

Lock timing KIA, Hyundai

Lock timing KIA, Hyundai

Product code: W0557

Tool for setting the magnetic ring Citroen, Peugeot, Jaguar, Land Rover 2.7 ans 3.0 TD V6 HDI

Tool for setting the magnetic rings in Citroen , Peugeot , Jaguar , Land Rover 2.7 and 3.0 TD V6 HDI engines.

Product code: W0576

High pressure pump sprocket lock for VW, Audi 3.6 V6 engines

High pressure pump sprocket locking tool for VW, Audi 3.6 V6 4V engines (OEM T10332)

Product code: W0580

Timing Lock Jaguar, Land Rover, Range Rover 2.7 TDV6 Diesel

Product code: W0582

Puller Injectors 2.0 2.2 HDI Bosch

Product code: W0583

Delphi piezoelectric injector puller for Mercedes, Kia, Hyundai

Delphi piezoelectric injector puller for Mercedes, Kia, Hyundai

Product code: W0589

Wave staples for hot stapler, 0.8mm

Wave staples for hot stapler ø=0.8mm wire, 100pcs

Product code: 804078

Camshaft lock for Opel 1.4 without Turbo

Product code: W0654

Glow plug reamer, 9mm

Tool for reaming broken glow plugs shafts. Diameter: 9mm. Length: 11cm.

Product code: W0633

Rear crankshaft silent replacement tool for Iveco, Fiat, Citroen, Peugeot 3.0

Rear crankshaft silent and simering replacement tool for Reinz, Erling, Glaser 13.65mm silents.

Product code: W0640

Puller sleeve rear trailing arm KIA Creed I, II, Hyundai I 30 (oe sleeve 55543-2H000)

Product code: W0643

Key camshaft actuator BMW / Mini B38 B46 B48

Product code: W0660

Variator key VW, Audi 3.0 L

Product code: W0674

Key variator VW, Audi 4.2, 2.5, 5.0

Product code: W0675

Fan clutch remover for BMW

BMW fan viscous clutch remover. Double-sided holding tool with a spacing of 38mm and 44.5mm.

Product code: W0676

Face mill cutter for Fiat 1.4 16V shafts

Face mill cutter for Fiat 1.4 16V shafts.

Product code: W0699

Wrench for unscrewing the injector nut for Volkswagen, Audi 2.0 TDI - Siemens (17mm)

Product code: W0710

Hyundai / Kia fuel filter key (108mm)

Product code: W0712

Timing lock for Citroen, Peugeot 1.8, 2.0, 2.2

Timing lock for Citroen, Peugeot 1.8, 2.0, 2.2

Product code: C01/0006

Timing locks for Ford, Mazda 1.8 / 2.5 D, TD, DI, TDCI, TCI

Timing locks for Ford, Mazda 1.8 / 2.5 D, TD, DI, TDCI, TCI.

Product code: C01/0008

Timing lock for BMW 1.6 N43, B16, B20 engines

Timing lock for BMW 1.6 N43, B16, B20 engines.

Product code: C01/0024

Timing lock BMW, Mini N47 and N57 1.6 - 3.0 engines

BMW, Mini timing lock for N47, N47S, N57S and N57 1.6, 1.8, 2.0, 2.3, 2.5, 3.0 diesel engines.

Product code: C01/0076

Timing lock for Ford 1.8 Duratec, Mazda 2.0

Timing lock for Ford 1.8 Duratec - SCI, Mazda 2.0, 2.3 TURBO with timing chain. Flywheel lock.

Product code: C01/0046

Oil drain hose for VW and AUDI direct shift gearbox filter (DSG)

Oil drain hose for VW and AUDI direct shift gearbox filter. Allows the controlled draining of the oil.

Product code: C01/0048

Timing lock for Opel, Suzuki 1.0 12V, 1.2 and 1.4 16V petrol engines

Timing lock for Opel, Suzuki 1.0 12V, 1.2 and 1.4 16V petrol engines with timing chain.

Product code: C01/0056

Timing lock for Ford, Mazda 1.8 and 2.5 diesel, 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V petrol engines

Timing lock for Ford, Mazda 1.8 and 2.5 diesel, 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V petrol engines

Product code: C01/0061

Timing lock for BMW engines M52, M54, M56, M52TU

Lock for setting the BMW M52, M54, M56, M52TU timing differentials in Vanos systems.

Product code: C01/0068

Timing tool for BMW 1.8 and 2.0 N42, N46 engines with Valvetronic

Timing tool for BMW 1.8 and 2.0 N42, N46 engines with Valvetronic.

Product code: C01/0078

Shaft locking pin for Audi, VW 2.4 / 2.8 30V 2.7 Turbo engines

Shaft locking pin for Audi, VW 2.4 / 2.8 30V 2.7 Turbo engines

Product code: C01/0086

Camshaft timing lock for VW 1.4 and 1.6 FSI, TFSI engines

Camshaft timing lock for Audi, VW, Seat, Skoda 1.4 and 1.6 FSI, TFSI engines with a timing chain.

Product code: C01/0088

Timing lock for BMW N40, N45 engines

Timing lock for camshafts and variators for BMW N40, N45, N45T (B16) 2001-2009 engines.

Product code: C01/0096

Injection pump sprocket lock for BMW, Mini engines N47 N57 2.0

Injection pump sprocket lock for BMW and Mini N47 2.0 D20 CU20. BMW N47 / N47S injection pump bushing to maintain gear position during disassembly of the BMW diesel pump.

Product code: C01/0099

Timing lock set for Opel, Fiat 1.9 CDTI / 1.9 JTD

Timing lock set for Opel, Fiat, Alfa Romeo, Jeep, Suzuki 1.6, 1.9, 2.0 CDTI / JTD /MultiJet

Product code: C01/0171

Timing lock for Renault, Nissan 1.2, 1.4, 1.6, 1.8, 2.0 16V and 1.5 DCI engines

Timing lock for Renault, Nissan 1.2, 1.4, 1.6 1.8, 2.0, 2.0 Turbo 16v (98-08), 1.5 dCi.

Product code: C01/0174

Timing locking pins for Fiat 1.2, 1.4 T-Jet

Timing locking pins for Fiat, Lancia 1.2, 1.4 16V T-Jet petrol engines.

Product code: C01/0180

Timing tool for Renault, Nissan, Opel, Mercedes 1.6, 2.0, 2.3 engines

Timing tool for Renault, Nissan, Vauxhall, Opel, Mercedes-Benz 1.6, 2.0, 2.3 engines.

Product code: C01/0199

Engine timing tool set for 1.5, 1.9, 2.2, 2.5 DCi Renault, Opel, Nissan diesel engines with chain

Engine timing tool set for 1.5, 1.9, 2.2, 2.5 DCi Renault, Opel, Nissan, Suzuki, Mitsubishi, Dacia diesel engines with chain.

Product code: C01/0215

Timing lock for Citroen, Peugeot, Opel 1.2 Vti (VVT), GDI

This tool kit makes it easy to change the timing belt without having to disassemble multiple components. Allows you to determine if the belt needs to be replaced without having to disassemble the engine.

Product code: C01/0230

Hydraulic cylinder press for silents 12T

Press for extruding bolts and ball joints with a 12 ton press capacity.

Product code: C02/0136

Silent remover and installer press with adapters for Movano, Master, Nissan

Press with bushing sleeves for the top link of the swingarm of Opel Movano, Renault Master, Nissan Interstar. Universal press for extruding and pressing pins, metal-rubber sleeves, ball pins and many elements that are within the dimensions of the press.

Product code: C02/0145

Injector puller with sliding hammer for Mercedes CDI injectors

Injector puller with sliding hammer for Mercedes CDI injectors 611, 612, 613

Product code: C04/0095

Bushing extractor and installer for Ford and Volvo

The tool is used to install and extract bushings and silents without disassembling the control arm. Enables the replacement of bushings in 4-wheel drive (4x4) cars.

Product code: C04/0211

Hollow hydraulic cylinder 12t

Hydraulic cylinder with through and threaded hole. It can be used with various types of mechanical presses that are designed for the extraction of metal and rubber silents, pins, joints, etc.

Product code: C07/0098

Cylinder leak-down tester

A classic device for checking the tightness of cylinders with compressed air in a compact design. Adapters: M14x1.25 (short), M18x1.5, M14x1.25 (long).

Product code: CHS-A0021

Universal fuel injector test set 41pcs

The gauges are designed to measure fuel pressure in both low and high pressure systems. The kit includes two gauges, adapters and hoses.

Product code: CHS-A0125

Carburettor testing kit

A kit for testing the fuel pump carburettor and automatic gearboxes. It is used for the synchronization of car and motorcycle carburettors, 2T and 4T. 

Product code: CKB0112

Pulley holding double pin wrench set for VW, Audi 1.9 TDI PD, 1.4 TDI engines

Pulley holding double pin wrench set for VW, Audi 1.9 TDI PD, 1.4 TDI engines. 3pcs.

Product code: CKB01886

Pneumatic ATF fluid extractor / dispenser 10l

Pneumatic fluid changer for replacing oil in automatic gearboxes and differential gearboxes. The set includes 13 adapters for a wide range of automatic gearboxes (VAG, BMW, Ford and Mercedes-Benz)

Product code: CKB03689

Ball joint separator and installer tool set

This ball joint tool kit is suitable for removing and fitting press-fit type ball joints without removing the vehicle's control arm. The pressing device's gap size is 152mm.

Product code: CKB04011

Coil spring compressor kit

Coil spring compressor kit for passenger cars and vans. Max working lenght: 300mm. Max. pressure: 2.651kg.

Product code: CKB04027B

Oil filter pliers 10"

Oil filter pliers 10". For universal use.

Product code: CKB04061

Piston ring compressor pliers

Piston ring compressor pliers. Operating range: 110-160mm.

Product code: CKB04082

Oil cap socket set with ratchet and wrench

A set for unscrewing oil filter caps.

Product code: CKB04111

3pcs Fuel line disconnector plier set.

3pcs Fuel line disconnector plier set. For G.M., Chevrolet, Buick, Pontiac, Renault, Fiat, Ford, Mercury, Opel, Dodge, Chrysler vehicles.

Product code: CKB04225

Ignition timing lamp

A strobe lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

Product code: CKB04795

Fish tape, 15m, red

15m steel cable fish tape in plastic red case. Flat metal tape, size 3x1mm. Insertion head size 40x10x3mm.

Product code: FT50-RED

Handheld vacuum tester and brake bleeding kit

Professional vacuum and pressure diagnostics tool used to test a variety of essential engine and associated functions including fuel, ignition, transmission and emissions.

Product code: G01156

Manual oil pump 1.5L

Manual suction device with a capacity of 1.5l. The device is designed to suck out or dispense oil and other operating fluids in hard-to-reach places.

Product code: G02124

Bearing and gear puller with 3 jaws. Working range: up to 4" (102mm)

Bearing and gear puller with 3 jaws. Working range: up to 4" (102mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02231

Gear and bearing puller with 3 jaws. Max capacity: 14" (350mm)

Gear puller with 3 jaws 14" (350mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02247

Clutch aligning tool with 3 sleeves

A high-quality universal tool for locking the clutch disc, ideal for manual alignment (centering) and applying the clutch disc to the pressure plate in cars and vans.

Product code: G02766

Car non-insulated terminal connector set, 600pcs

Car non-insulated terminal connector set, 600pcs. For many applications such as car alarms, headlight, remote start, relay,stereos etc.

Product code: G02829

Press the down crossover pins Jeep Cherokee, Grand Cherokee, Wrangler

Product code: W0399

Hydraulic wheel hub puller 10T

Hydraulic wheel hub puller 10T

Product code: MG04B1044B

Lock Belt VW / Audi / Seat / Skoda 1.8 FSI / TFSI

Product code: W0317

Press the king pins the upper and lower Jeep - Cherokee, Grand Cherokee, Wrangler

Product code: W0401

Timing locks for Ford, Mazda, Volvo 1.4, 1.6, 2.0 16V

Timing locks for Ford, Mazda, Volvo 1.4, 1.6, 2.0 16V.

Product code: C01/0014

Engine timing lock set for Ford, Mazda, Peugeot, Citroen 1.4 and 1.6 diesel

Engine timing lock set for Ford, Mazda, Peugeot, Citroen 1.4 and 1.6 diesel.

Product code: C01/0017

Belt pulley wrench for BMW diesel engines

Belt pulley wrench for BMW diesel engines.

Product code: C01/0100

Camshaft lock for Volvo 2.5 Turbo petrol engines

Camshaft lock for Volvo and Ford 2.5 Turbo petrol engines. (S40, S60, S80, V50, V70, C70, XC70, XC90, Ford Focus, S-Max, Galaxy, Mondeo).

Product code: C01/0114

Crankshaft lock for BMW and Mini petrol and diesel engines (2014-)

Locks the crankshaft pulley in BMW and Mini petrol engines B38, B48, B58 and diesel engines B37, B47, B57.

Product code: C01/0224

Hex key for Bosch injector valve

H10 hex wrench with a 7.5mm hole for disassembly of Bosch injector valves.

Product code: C04/0087

Fish tape, 30m, red

30m steel cable fish tape in plastic red case. Flat metal tape, size 3x1mm. Insertion head size 40x10x3mm.

Product code: FT100-RED

Ball joint seperator for pin diameters up to 19mm

Professional ball joint pin puller. It is made of durable, high-quality tool steel. It is adapted to work with pins with a diameter of not more than 19mm.

Product code: G02587

Alternator key with 6 point 17mm outter drive. Length 30mm

Bosch alternator clutch wrench. A specialist wrench for assembly and disassembly of the pulley clutch of Bosch alternators.

Product code: G02782

Car mini bladed fuse set, 140pcs

Car mini bladed fuse set, 140pcs

Product code: G02825

Multifunctional socket wrench 48in1. Socket diameters: 8-19mm

It can replace wrenches intended for 12-point, 6-point, 4-point, E-Torx and spline screws and nuts.

Product code: G15030

Puller for replacement hydraulic tappets - Opel 8V

Product code: W0307

Timing chain and camshaft locking tool set for Mercedes engines

This timing chain and camshaft locking tool set is to be used on M271, DE18ML, E16ML, DE18LA, 4 cylinder, 2003-2005 Mercedes engines.

Product code: MG04A2121

Camshaft lock for BMW engines M52, M54, M56

Camshaft lock for BMW Vanos engines M52, M54, M56. Tools for setting variators, cylinders, chain, main chain tension and the chain tensioner lock. 

Product code: C01/0010

Timing tool set for Jaguar and Land Rover (V8 5.0)

The timing tool set enables the set up of correct the engine timing when replacing the timing belt.

Product code: C01/0220

Ball joint removal tool set

Designed for easy removal of most popular types of pitman arms, tie rods and ball joints. Operation range: 17, 19, 21, 23, 27mm

Product code: CKB04340

Puller sleeve front beam Renault Laguna II / Trafic II (oe sleeves 8200000512)

Product code: W0368

Pin to the crankshaft Ford Fiesta 1.25, 1.4, 1.6 Zetec, Duratec

Product code: W0406

Fish tape, 30m, green

30m steel cable fish tape in plastic green case. Flat metal tape, size 3x1mm. Insertion head size 40x10x3mm.

Product code: FT100-GREEN

CV joint clamp banding tool

CV joint clamp banding tool is suitable for installation and tightening of band-style clamps on CV joint boots, power steering rack and pinion steering gear boots.

Product code: G01653

Hydraulic jaw puller kit 5t

Multi-function puller with adjustable two or three leg function. Allows bearings, gears, etc. to be easily removed with minimal effort by use of the hydraulic puller.

Product code: G00910

CV boot clamp pliers (ear type)

CV boot clamp pliers suitable for Oetiker CV drive shaft boot securing clips. Plier's plate presses a flat on the top of the clip so that it forms the spring loop correctly.

Product code: G01656

Oil filter strap wrench 60-105mm

Band wrench for dismounting all types of oil filters with a diameter of 60 to 105mm.

Product code: G02564

Tube flaring set 3-19mm

Tube flaring set for tubes with diameters: 3, 5, 6, 8, 10, 12, 15, 16, 18, 19mm.

Product code: G02720

Heat shrink tubes with tin, 100pcs set

The use of tin shrinkable tubing allows for a durable and waterproof connection of two wires, which is possible thanks to the inner layer of glue.

Product code: G03609

Universal socket adapter 7 to 19mm diameters

Universal socket adapter. For nuts and bolts with 7 to 19mm diameters.

Product code: G15021

Tube double flaring set, 9pcs

Tube double flaring set, 9pcs for brake line tubings.

Product code: K00180

Lock Flywheel Renault 1.2 / 1.6 Petrol, 1.9 D / TD

Product code: W0327

Timing lock set for Ford, Mazda, Volvo 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V

Timing lock set for Ford, Mazda, Volvo 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V. Locking pin for the shaft and two camshafts and pins for blocking the crankshaft.

Product code: C01/0002

Timing lock set for Citroen, Peugeot, Fiat, Iveco, Renault, Opel

Timing lock set for Citroen, Peugeot, Fiat, Iveco, Renault, Opel 2.5, 2.8 diesel engines.

Product code: C01/0015

Timing lock set for Ford 1.0 EcoBoost (Fox) LT

Ford timing lock for 1.0 Eco Boost (Fox) LT engines from 2018.

Product code: C01/0229

Engine timing kit for Hyundai, Kia 1.6 Diesel engines

Engine timing kit for Hyundai, Kia 1.6 CRDi, D4FE, D4FE (U3) Diesel engines.

Product code: C01/0231

Fuel pump tool for Land Rover and Jaguar 2.0 diesel engines

The tool is used to remove the fuel pump without damaging the chain.

Product code: C01/0255

Renault and Peugeot rear axle bush remover and installer

Designed for the removal, installation and alignment of rear axle bushes on Renault Laguna II and Peugeot 207.

Product code: C02/0094

Engine timing tool kit for BMW S54 engines

Specifically designed for the popular BMW M3 fitted with the chain driven 3.2 litre 6 cylinder 24-valve petrol engines. Engine code S54 (32 6S 4)

Product code: CKB01062

Stud Wrench 8" 12-21mm

Fully adjustable with a one-handed squeeze. Efficient ratcheting by releasing, then re-gripping the object. Often removes nuts and bolts damaged by other tools.

Product code: G00860

Fuel feed pipe pliers

Suitable for the removal of connectors on in-line fuel filter.

Product code: G01659

Vacuum gauge and fuel pump pressure tester set with adapters

Measures vacuum up to 70cmHg and pressure up to 0.7bar. Fittings included for compatibility with most cars.

Product code: G02508

Universal three arms oil filter wrench 3/8" (65-130mm)

Oil filter wrench with 3 arms can be adjusted from 65 - 130mm in diameter. Comes with an adapter so it fits any 3/8" and 1/2" square drive ratchets or extensions.

Product code: G02550

Oil filter strap wrench 85-95mm

Band wrench for replacing oil filters in cars and vans. Designed for filters with a diameter of 85 to 95mm.

Product code: G02562

Oil filter strap wrench 95-110mm

Band wrench for replacing oil filters in cars and vans. It is designed for automotive repair.

Product code: G02563

Oil drain pan 10L

A container ideal for the recovery of oil and antifreeze liquids.

Product code: G02634

Tube flaring tool set with pipe cutter

Tube flaring tool set with pipe cutter. For tube sizes: 5, 6, 8, 10, 12, 14, 18mm.

Product code: G02722

Wiper arm puller

Wiper arm puller. The puller is used to remove car wiper arms. Made of durable chrome-molybdenum steel.

Product code: G02770

14pcs E4-E24 Torx socket set

14pcs E4-E24 Torx socket set. Use with 1/2", 3/8", 1/4" drives.

Product code: G13566

Pilot bearing puller. For bearing with inner diameters: 12-38mm

Suitable for removing tight fitted sleeve type bearings and bushings with inner ring diameters of 12 to 38mm.

Product code: G30300

Puller bushings rear beam Renault Laguna II (to no of original sleeves with flat his back)

Product code: W0329

Timing Lock Ford, Peugeot, Volvo - 2.0, 2.2 D

Product code: W0300

Timing lock for Opel 1.4

Timing lock for camshaft and chain sprocket on Opel 1.4 petrol engines (2010-)

Product code: C01/0025

Camshaft, crankshaft and chain locking tool for BMW, Mini 1.4 and 1.6 16V

Camshaft, crankshaft and chain locking tool for BMW, Mini with 1.4 and 1.6 16V engines.

Product code: C01/0115

Timing lock for Ford, Fiat, Citroen, Peugeot 2.2 TDCI engines

Timing lock for Ford, Fiat, Citroen, Peugeot 2.2 TDCI engines.

Product code: C01/0179

Timing lock for BMW and Mini B37, B47, B57 1.5, 2.0, 3.0 diesel engines with chains

Timing lock for BMW and Mini B37, B47, B57 1.5, 2.0, 3.0 diesel engines with chains.

Product code: C01/0223

Set of hooks 4 pieces

Set of 4 hooks. Hooks have hardened chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135mm.

Product code: CKB04710

Hydraulic jaw puller set 10t

Multi-function puller with adjustable two or three leg function. Allows bearings, gears, etc. to be easily removed with minimal effort by use of the hydraulic puller.

Product code: G00911

Oil funnel with built in filter

Oil funnel with built in filter and flexible hose. Dia.: 140mm

Product code: G02150

Lever style valve spring extractor. For 8, 16, 24V engines

Lever press designed to disassemble and remove valve springs in 8V/12V/16V/24V OHV, OHC and CVH engines. Adapters: 24, 30, 35mm

Product code: G02573

Hook and pick set 6pcs (Lenght: 240mm)

Hook and pick set for removing seals, O-rings and gaskets.

Product code: G02706

Hook and pick set, 9pcs

Hook and pick set for removing oil seals, o-rings and gaskets

Product code: G02708

Alternator clutch key with socket stem

A key dedicated to alternators with a clutch, enabling unscrewing the bolt securing the pulley for easy removal of the V-belt.

Product code: G02783

5pcs strut nut tool set for Audi, VW and Mercedes

A set of nut tools for tightening and loosening shock absorber mounts.

Product code: G02785

Car non-insulated terminal connector set, 750pcs

Car non-insulated terminal connector set, 750pcs

Product code: G02828

Heat shrink tubes with tin, 50pcs set

The use of tin shrinkable tubing allows for a durable and waterproof connection of two wires, which is possible thanks to the inner layer of glue.

Product code: G03607

Heat shrink tubes with tin, 100pcs set

The use of tin-shrinkable tubing allows for a durable and waterproof connection of two wires, which is possible thanks to the inner layer of glue.

Product code: G03608

Universal socket adapter 7 to 19mm diameters

The universal socket is designed to automatically adjust to fit any nut or bolt with 7 to 19mm (1/4" to 3/4") diameters.

Product code: G15020

Pilot bearing puller. For bearing with inner diameters: 12-38mm

Suitable for removing tight fitted sleeve type bearings and bushings with inner ring diameters of 12 to 38mm.

Product code: G30301

Puller to the hub / bearings VW T5

Puller to the hub / bearings VW T5

Product code: W0129

Puller for wheel hub / bearing Ford Focus II, C-Max, Volvo, Mazda 3,-puller with ABS and without ABS

Product code: W0305

Crankshaft rear oil seal replacement tool for VW 2.5 TDI engines

Crankshaft rear oil seal replacement tool for VW Crafter 5-cylinder diesel engines 2.5 TDI common rail (2006-2013).

Product code: C05/0084

Pneumatic CV boot installation tool (8bar)

The CV boot installation tool is to be used solely for the stretching of flexible CV boots onto drive-shaft assemblies of automotive vehicles.

Product code: JBM52994

Valve stem seal remover and installer kit

Valve stem seal remover and installer kit. Adapter sizes: 5, 5.5, 6, 6.5, 7, 8, 9.53, 10.8, 14.8mm.

Product code: CKB04046

O-ring and oil seal removal tool

Universal double hook puller for removing O-rings and oil seals.

Product code: CKB04117

Valve lapper set

A reliable set of two valve lappers for engine valves. The ends have rubber suction cups. Diameters: 16, 20.5, 28.5, 30mm

Product code: CKB04220

Camshaft lock for BMW M52 M54 M56 M52TU engines

Camshaft lock for BMW M52 M54 M56 M52TU engines.

Product code: C01/0033

Fuel line disconnect plier set, 3pcs

3pcs fuel line coupling disconnect pliers

Product code: JBM53445

Ball joint separator set, 3pcs

Ball joint separator designed for removing the track rod end from the steering arm without doing damage to the taper pin. Suitable for most small cars and light vans.

Product code: DK-230503

Oil drain pan, 15l

Oil drip tray is constructed of high quality, recyclable polythene plastic that is resistant to corrosion so your oil pan will remain durable for carrying oil, gasoline, and antifreeze. 450mm x 145mm

Product code: DK-230533-15

Fish tape, 60m, red

60m steel cable fish tape in plastic red case. Flat metal tape, size 3x1mm. Insertion head size 40x10x3mm.

Product code: FT200-RED

Hydraulic hose crimping tool set

Set contains the hand-operated hydraulic crimping tool, four sets of dies for standard fittings and four sets of dies for reduced barrier fittings.

Product code: G00905

Two jaw gear and bearing puller. Operating range: up to 200mm

Two jaw gear and bearing puller with adjustable clamping depth and width. For both internal and external bearings.

Product code: G02202

Bearing and gear puller with 3 jaws. Working range: up to 4" (102mm)

Bearing and gear puller with 3 jaws. Working range: up to 4" (102mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02242

Valve seal removal and installer set

Set for removing and installing valve seals in multi-valve engines. 5, 5.5, 6, 6.5, 7, 8, 10mm adapters and 2 tips for inserting long sealants.

Product code: G02611

18pcs socket set for oil drain plugs

Specialized socket set for unscrewing drain plugs in oil pans. The set includes 17 sockets with 3/8" drives.

Product code: G02711

CV joint assembly removal tool

Can be used in almost all vehicles. It is suitable for replacing damaged, worn out axle hinges quickly and without any problems.

Product code: MG04B1012

Ball joint and silent block remover/installer set

Suitable for any passenger car, utility trucks and SUV vehicles, in which the ball joints have an interference fit. The tools allow for easy removal and installing without large-scale demounting.

Product code: MG50042

Universal bearing removing/installing kit, 34-84mm

Spindle: M10xP1.5, M12xP1.75, M14xP2.0, M16xP2.0, length/Ø A 44/34, 46/36, 54/44, 56/46, 58/48, 66/56, 68/58, 70/60, 78/68, 80/70, 84/72, B 48/38, 50/40, 52/42, 60/50, 62/52, 64/54, 72/62, 74/64, 76/66mm

Product code: MG50093

Front wheel drive kit, 55.5-91mm, axle 380mm

Sizes(d) 55.5, 59, 62, 65, 66, 71.5, 73, 78, 84, 86, 91mm, axle 380mm

Product code: MG50405

Piston ring compression set

Piston ring service tool set for install piston rings; 3 pcs piston ring plates/compressors; 1 piston ring expander; Piston ring groove cleaner; 3 blades

Product code: JBM53251

Heat shrinkable solder sleeve set 100pcs

Allows an easy and quick connection of cables, soldering and sealing by placing the cables in the solder sleeve for the subsequent heat application. For wire 0.25-6.0mm2 (26-10AWG)

Product code: JBM53992

Valve lapping tool set for drills, 6pcs

This tool smoothens the surfaces of new valves, ensuring that they fit firmly into the cylinders. Suction cup diameters: 16, 20, 30, 35, 40mm.

Product code: JBM54033

Injector puller set, Bosch, Delphi, Denso, Toyota, Siemens, 10t

Injector puller set to be used with hydraulic hand pumps (not included). For M17 Bosch, M14 Delphi, M16 Toyota Adaptor, M20 Denso, M25 x 1.0 / M27 Siemens.

Product code: JBM54245

Cam lock set for Fiat Ducato 2.3, 3.0 JTD Iveco, Peugeot, Citroen

Cam lock set Fiat Ducato 2.3, 3.0 JTD Iveco, Peugeot, Citroen. Pins and bolts for locking and blocking the crankshaft, camshafts.

Product code: C01/0003

Pneumatic brake fluid exchange kit (10 - 40psi)

This brake bleeder kit is suitable for bleeding brake and clutch systems in vehicles with an ABS system.

Product code: MG04B4023

Brake rewind tool set, 21pcs

Right- and left-hand helix bolts, suitable for almost every car type, like Citroen, Audi, Fiat, Ford, BMW, Mercedes-Benz, Toyota, Volvo, VW, Renault, Opel

Product code: MG50061

Valve stem seal pliers

For replacing valve stem seals.

Product code: MG50106

Bearing separator set

Bearing separator set, capacity 30-50mm, 50-75mm, 2 separators, 1 forcing screw, 4X2 extensions

Product code: MG50132

Brake cylinder wind-back tool

Brake cylinder wind-back tool, for Audi, Ford, Honda, Jaguar, Mazda, Mitsubishi, Nissan, Rover, Saab, Subaru, Toyota, VW

Product code: MG50407

Timing tool set for Renault

Timing tool set for Renault 16v engines. Laguna, Safrane, TDC 2.0, 2.5 16v 1996-2001

Product code: MG50620

Timing tool set for Peugeot

1.0, 1.1, 1.4, 1.6, 1.8, 1.9, 2.0 and 1.6, 1.8, 2.0, 2.2 16V (Turbo, Twin cam.) petrol, 1.4, 1.5, 1.7, 1.8, 1.9, 2.1, 2.5 D,TD,TDI, 1.4, 1.6, 2.0, 2.2 HDI

Product code: MG50685

Wrench for rim unscrewing, ABS Renault Maskot, Master

Wrench for rim unscrewing, ABS Renault Maskot, Master

Product code: W0095

Injector puller with sliding hammer for Mercedes CDI injectors

Injector puller with sliding hammer for Mercedes CDI injectors in OM611, 612 and 613 engines.

Product code: C04/0095WF

Viscous clutch wrench Mercedes Sprinter 906 218, 318, 418, 518 CDI

Viscous clutch wrench Mercedes Sprinter 906 218, 318, 418, 518 CDI

Product code: W0239

Puller sleeve rubber front, rear sleds BMW Series 5, 6, 7 (33316775781, 33316792873)

Product code: W0444

Puller sleeve rear beam, RENAULT LAGUNA III , Renault Laguna Coupe

Product code: W0503

Inner tie rod remover and installer tool. For rod diameters: 28-35mm

Inner tie rod remover and installer tool. For rod diameters: 28-35mm. Length: 400mm.

Product code: G02547

Timing belt tightener for VAG car engines

Timing belt tensioner wrench for VAG car engines.

Product code: W0039

Set for removing injectors Delphi 2.0 HDI (12mm) (Delphi 28388960)

Product code: W0661

Slide hammer M12/16, ⌀85mm, weight 1,3 kg

Slide hammer M12/16, ⌀85mm, weight 1,3 kg

Product code: W0048

Cam lock Alfa Romeo 1.7; 1.8 TBI

Product code: W0336

Puller sleeve rear beam Opel Zafira A; Astra G; Combo; Meriva A (oe number 402644)

Product code: W0371

Lock Timing BMW 2.5 / 3.0 Petrol; Engines N51, N52, N52K, N53, N54 (timing chain)

Product code: W0382

Puller injectors 2.0 HDI

Product code: W0411

Puller sleeves (two) control arm front Volkswagen T4 ( 7D0 407 140 VW )

Product code: W0427

Key oil filter Fiat, Opel, Alfa Romeo 1.3, 1.6, 1.9. 2.0 - 75.3 x 16 hexagonal

Product code: W0484

Puller sleeve back beam (middle) BMW 5 (E 60, E61) BMW 6 (E63, E64) (oem 33176770825)

Product code: W0520

Crankshaft rear oil seal replacement tool for Iveco, Fiat, Citroen Peugeot 3.0

Crankshaft rear oil seal replacement tool for Iveco, Fiat, Citroen Peugeot 3.0, 13x12.5 (Corteco, DT, LEMA, Ajusa)

Product code: W0522

Short bolt M12 L 150 mm / used in sleeve pullers

Product code: W0530

Puller adapter for Denso M25x0.5 Toyota and Mazda injectors

Puller adapter for Denso M25x0.5 Toyota and Mazda injectors

Product code: W0534

Puller injectors Fiat Opel 1.9 JTD; CDTI

Product code: W0551

Fuel filter wrench for Ford Transit 2.2 TDCI

Fuel filter wrench for Ford Transit and Tourneo 2.2 TDCI.

Product code: W0625

Glow plug reamer, 9mm, length 175mm

Tool for reaming broken glow plug shafts. Diameter: 9mm. Length: 175mm.

Product code: W0637

52pcs radio release tool kit

Wrenches, hooks, suitable for Kenwood 1998-2001, Sony II 2002, Kenwood III 2002, Pioner + JVC, Sony I 2001, Sony Idic 2005, Panasonic 2006, Kenwood I 1998, Kenwood Mask, Blaupunkt, Grundig

Product code: JBM53388

Universal puller (screw L=100mm, hole distance 27-62mm)

Universal puller (screw L=100mm, hole distance 27-62mm)

Product code: W0136

Oil drain repair cutter, Volkswagen

Oil drain repair cutter, Volkswagen

Product code: W0166

Electric terminal release tool set, 23pcs

Perfectly removes terminals from coolant sensors, wiring harness connectors and terminal blocks. Fit for BMW, Mercedes, Opel, VW, Jaguar, Porsche, Saab, Seat, Skoda, Ford, Renault, Citroen, Fiat, Honda, Mazda, Mitsubishi, and Toyota vehicles.

Product code: DK-230588

Brake piston presser. Max 70mm jaw spread.

Essential tool for pressing in the brake piston to allow insertion of new brake pads.

Product code: G02534

Inner tie rod remover and installer tool. For rod diameters: 35-41mm

Inner tie rod remover and installer tool. For rod diameters: 28-35mm. Length: 400mm.

Product code: G02548

Puller arm sleeve Volkswagen T5 - rear arm

Puller arm sleeve Volkswagen T5 - rear arm

Product code: W0191

Rear Suspension Bush Puller Ford Mondeo

Rear Suspension Bush Puller Ford Mondeo

Product code: W0020

Camshaft locking bar for Ford 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V engines

Camshaft locking bar for Ford 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V engines

Product code: C01/0001

Crankshaft front oil seal puller for Iveco 3.0

Crankshaft front oil seal puller for Iveco 3.0

Product code: W0434

Adapter for injector pulling Opel Vivaro 2.0 CDTI - hardened

Adapter for injector pulling Opel Vivaro 2.0 CDTI - hardened

Product code: W0225

Key viscous clutch Ford Transit 2.3 2.4 3.2 (2001 – 2006)

Product code: W0416

Adapters to bolts down Jeep - Cherokee, Grand Cherokee, Wrangler

Product code: W0398

Universal camshaft pulley locking tool set, hardened

Universal camshaft pulley locking tool set, hardened

Product code: W0132

Bushing and silent press for Mercedes, VW, Renault, Opel, Nissan

The tool is used for pressing in and out the pins and silents without the disassembly of the control arm, thus saving you time and energy.

Product code: C02/0140

Lock timing Fiat 1.1, 1.2, 1.4 8v L

Product code: W0695

Adapter + screw of injector puller, Mercedes CDI, VW TDI; Bosch

Adapter + screw of injector puller, Mercedes CDI, VW TDI; Bosch

Product code: W0029

Adjustable clutch plate spanner wrench air conditioning

Product code: W0616

Adapter to pull the injector Opel Fiat Alfa Romeo 1.9 JTD (hardened )

Product code: W0281

Timing lock for BMW M43, M70, M73 engines with timing chain

Timing lock for BMW M43, M70, M73 engines with timing chain.

Product code: C01/0050

Glow plug reamer, 11mm

Tool for reaming broken glow plug shafts. Diameter: 11mm. Length: 11cm.

Product code: W0634

Timing lock for crankshaft and balancing shafts for BMW 2.0 and 3.0 engines

Timing lock for crankshaft and balancing shafts for BMW 2.0 and 3.0 engines N47, N47S.

Product code: C01/0077

Injector seat milling and cleaning kit

The kit is suitable for renovating a diesel injector housing, cleaning an injector housing and bore, as well as a glow plug bore using milling cutters.

Product code: MG04A3065D

Self-adjusting oil filter wrench, 64-102mm

1/2" self-adjusting oil filter wrench, opening 43-102mm, the jaws are adjustable by applying torque to the square drive

Product code: MG50033

Cup-type oil filter wrench set, 30pcs

Twin-function oil filter wrench set (65-120mm), square drive: 1/2", 3/8", self-setting oil filter wrench. For almost every car type.

Product code: MG50038

Stud remover

Stud remover, capacity 6.35-20mm.

Product code: MG50047

Combined socket set for alternator, 13pcs

Combined socket set for alternator, 13pcs

Product code: MG50352

Special wrench for turbocharger

Special wrench for turbocharger, 3/8", 12-pt, size: 12mm

Product code: MG50800

Piston ring expander, 120-160mm

Piston ring expander, clamping capacity 120-160mm

Product code: MG50335C

Universal valve spring compressor kit

Universal valve spring compressor kit. Designed to enable the replacement of valve springs and valve stem oil seals. Diameters: 34mm, 26mm, 20mm.

Product code: CKBA2308

Puller for suspension arm sleeve, Cinquecento,Seicento

Puller for suspension arm sleeve, Cinquecento,Seicento

Product code: W0004

Adapter for injector pulling, Mercedes CDI (hardened)

Adapter for injector pulling, Mercedes CDI (hardened)

Product code: W0053

Silent puller for BMW E38, E39, E60, E63, E65, E53, X5, Z8 passanger cars

Extractor for removing and fitting the silent block on the rear axle link arm on BMW passanger cars.

Product code: W0087

Camshaft locking tool for Fiat 1.4 Fire Evo

Camshaft locking tool for Fiat 1.4 Fire Evo petrol engines.

Product code: W0124

Lock camshaft BMW M40, M43 models E30, E34, E36

Lock camshaft BMW M40, M43 models E30, E34, E36

Product code: W0139

Extra feet puller for beam puller (W0033)

Extra feet puller for beam puller (W0033)

Product code: W0150

Press, puller for bolts, 20 adapters Master, Movano, Iveco, Vw Lt etc.

Press, puller for bolts, 20 adapters Master, Movano, Iveco, Vw Lt, Ctrafter, Sprinter

Product code: W0162

Dial strip Opel Kadett, Astra, Vectra, 1.6 / 1.7 - Diesel

Dial strip Opel Kadett, Astra, Vectra, 1.6 / 1.7 - Diesel

Product code: W0245

Puller injection pump sprocket Renault 1.9 D / TD / Volvo / Opel

Puller injection pump sprocket Renault 1.9 D / TD / Volvo / Opel

Product code: W0274

Key - Lock crankshaft pulley Honda

Product code: W0308

Press the upper crossover pins Jeep Cherokee, Grand Cherokee, Wrangler

Product code: W0313

Adapter for pulling Denso injectors for Toyota 2.2 170hp engines

Adapter for pulling Denso injectors for Toyota 2.2 170hp engines

Product code: W0320

Lambda probe socket set 7pcs

A set of professional sockets with special shapes and cuts for unscrewing lambda probes (oxygen sensors) and injectors without dismantling the wires.

Product code: G02687

Lock timing Ford Mondeo, Focus, C-Max 2.0 EcoBoost after 2010

Product code: W0375

Puller arm bushing rear Fiat Bravo II (No.sleeves 50700796 )

Product code: W0377

Lock camshaft Opel Corsa D 1.0

Product code: W0402

Injection pump removal tool for BMW N47, N47S Common Rail engines

Pinion extractor for diesel injection pumps in BMW N47, N47S and N57 1.8d, 2.0d, 2.5d, 3.0d engines manufactured in 2007 - 2015. This extractor is compatible with new generation BMW engines that have the distribution in the back (at the flywheel).

Product code: W0423

Lock camshaft Ford 1.6 EcoBoost

Product code: W0457

Lock timing Mercedes 2.0 2.1 2.2 CDI set

Product code: W0477

Puller sleeve rocker back Fiat Doblo 2010 - (oem sleeve FIAT 51930337)

Product code: W0523

The keys for locking the pulley shaft Mercedes M112, M113, M271, M272, M273, M642

Product code: W0604

Fuel pump nut wrench for Fiat, Citroen, Peugeot

Fuel pump nut wrench for Fiat Ducato, Citroen Jumper, Peugeot Boxer.

Product code: W0620

Key to the oil filter Toyota, Lexus, Scion 80 mm

Product code: W0687

Compression pressure test set for diesel engines

The set allows for quick identification of damages to the cylinders and injectors.

Product code: G02510

Axial joint tool, 33-42mm

Axial joint puller/installer. 1/2", clamping capacity: 33-42mm

Product code: MG50443

Rear suspension bushing tool Renault Laguna II

Rear suspension bushing tool Renault Laguna II

Product code: W0047

Slide hammer, weight 1.5kg, M12/M16

Slide hammer, weight 1.5kg, M12/M16

Product code: W0066

Puller hub / bearing Mondeo IV; Focus II RS (FORD 1 463 833)

Product code: W0506

Hardened M12 nut with bearing for pullers

Hardened M12 nut with bearing for pullers

Product code: W0149

The viscous clutch key Volkswagen LT 2.5 TDI

Product code: W0550

Front suspension bush axle beam tool L, R, Opel Astra G, H, Zafira

Front suspension bush axle beam tool Left, Right, Opel Astra G, H, Zafira (nr. oe 352 364)

Product code: W0175

Key to the wheel hub assembly Mercedes, inner diam. 55mm

Key to the wheel hub assembly Mercedes, inner diam. 55mm

Product code: W0146

Pin socket wrench arm Citroen / Peugeot 405 (hardened)

Pin socket wrench arm Citroen / Peugeot 405 (hardened)

Product code: W0194

Universal puller small metal-rubber sleeve

Universal puller small metal-rubber sleeve. Length: up to 54, external diam. 34mm, internal diam. 24mm

Product code: W0167

Timing lock for BMW M60, M62 engines

Timing lock for BMW M60, M62, 730i, 740i, 535i, 540i, 735i, 840i, X5 engines.

Product code: C01/0038

Glow plug reamer, 8mm

Tool for reaming broken glow plug shafts. Diameter: 8mm. Length: 11cm.

Product code: W0698

Timing lock for BMW 2.5 and 3.0 N51, N52, N52K, N53, N54 engines

The timing lock is used in N51 engines, N52 and N52K with Valvetronic, N53 and N54 engines with direct injection.

Product code: C01/0064

Timing lock Ford 2.2 TDCI engines

Timing lock Ford 2.2 TDCI Transit, Econetic HDT diesel engines.

Product code: C01/0191

Sleeve puller for Ford Mondeo MK 4 (2007- ) rear swingarm

Tool for assembly and disassembly of the sleeve without the need to disassemble the swingarm.

Product code: W0364

Oil pan thread repair set for M14x1.5 pans

Oil pan thread repair set for M14x1.5 pans

Product code: CKB0025-3

Ball joint, tie rod, and pitman arm separator set (5pcs)

Ball joint, tie rod, and pitman arm separator for cars and light trucks. 5pcs set. Forks are designed to interchange with either of the handles.

Product code: CKB04028

Adjustable timing pulley remover 42 - 82mm

Adjustable timing pulley remover 42 - 82mm

Product code: CKBA2213

ATF refill adapter set for automatic gearboxes

ATF refill adapter set for automatic gearboxes. 13 pcs.

Product code: CKBB1093

Oil drain pan, 10l

Oil drip tray is constructed of high quality, recyclable polythene plastic that is resistant to corrosion so your oil pan will remain durable for carrying oil, gasoline, and antifreeze. 385mm x 125mm

Product code: DK-230533-10

Universal silent and bearing puller kit, 27pcs

This professional tool set is designed for the removal and installation of bushings, silent bearings, hydraulic bearings and seals, etc.

Product code: DK-230581

Self-adjusting crimping tool, 0.25 - 10mm²

Self-adjusting crimping pliers for conductor end-sleeves. Wire ferrules are crimped onto a stranded wire in a four point crimp profile, protecting the fine strands from fraying, and then it is inserted into the terminal compartment.

Product code: G01772

Pneumatic ATF and oil filling pump set for gearboxes, 15pcs

Pneumatic ATF and oil filling pump set for gearboxes, 15pcs. For Ford, BMW, Honda, Nissan, VW, Audi, Skoda, Porsche, Mini Cooper, Mercedes Benz, Honda, Hyundai, Kia, Nissan, Infinity, Volvo, Toyota, Lexus.

Product code: G02117

Bearing and gear puller with 3 jaws. Working range: up to 8" (203mm)

Bearing and gear puller with 3 jaws. Working range: up to 8" (203mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02244

Universal oil filter wrench 80-105mm

Two way filter wrench is designed for the removal and installation of oil filters in cars. For diameter (min-max): 80 - 105mm.

Product code: G02559

3pcs Ball joint remover set. Diameters: 23, 28, 34mm

Pullers for ball joints on stabilizers and torsion bars. Suitable for cars and vans.

Product code: G02585

Inner bearing puller set. For diameters: 10-32mm

The internal bearing puller designed for dismounting internal bearings with an internal diameter of 10-32mm.

Product code: G02747

Combustion leak tester fluid

Combustion leak tester fluid

Product code: JBM14563

Bearing separator set

Bearing separator set, capacity 30-50mm, 50-75mm, 2 separators, 1 forcing screw, 4X2 extensions

Product code: JBM51125

Windshield wiper puller

Windshield wiper puller, max. diameter 45mm, min. diameter 17mm, simple handling, safe mechanism, design with thin legs and brass-finished ends. Weight 0.2kg.

Product code: JBM52454

Clutch centering mandrel, 11pcs

11pcs clutch centering mandrel with accessories, Ø20-26.6mm, Ø15-19mm, Ø23-36mm, Accessories diameters: 12, 14, 15, 16, 17, 18, 19, 20mm

Product code: JBM53410

Universal wiper arm puller

Universal wiper arm puller. Two paws type.

Product code: W0123

Leak tester for cylinder head gasket

CO2 Combustion leak detect. This tool is designed to check for the leaks between combustion and cooling system of water-cooled engines. With 3 adapters.

Product code: JBM53662

Sleeve puller, Golf IV, Audi A3, Skoda Octavia for the sleeve FEBI

Sleeve puller, Golf IV, Audi A3, Skoda Octavia for the sleeve FEBI

Product code: W0172

Wishbone lever tool, sliding type, lockable at 5 points

Wishbone lever tool, sliding type, lockable at 5 points

Product code: MG50417

Petrol fuel pump pressure test kit, 0-7bar, 1/4", 3/8" adapters

For petrol fuel pump pressure testing. For injection systems (except the CIS-Jetronic, Bosch and the GM throttle valve systems).Measuring range 0-7bar(0-100psi)

Product code: MG50195

Timing tool set for Opel, Saab

Camshaft, crankshaft locking tools, 1.9 CDTI/TID engines with timing belt

Product code: MG50087

Leak tester for cylinder head gasket

CO2 Combustion leak detect. This tool is designed to check for the leaks between combustion and cooling system of water-cooled engines. With 3 adapters.

Product code: MG04A4052

DSG clutch removal kit for VW, Audi, Seat, Skoda

The necessary kit for the correct replacement of the clutch in DSG (dry double clutch) gearboxes. For 1.2, 1.4, 1.8 TSi and 1.6 TDi engines.

Product code: C05/0213

Sleeve and silent puller for BMW 1, 3, X1 rear arms

Sleeve and silent puller for BMW 1 3, X1 Hatchback, Coupe, Convertible, Saloon, Touring rear arms. (OE 33326763092)

Product code: W0587

Puller injectors Citroen Jumper; Peugeot Boxer; Fiat 2.3 JTD HPI

Product code: W0560

Brake caliper sockets for Audi Q5, A4, A5

Designed to loosen or tighten brake caliper bolts in Audi vehicles.

Product code: W0552

Puller Injectors Fiat Opel Suzuki 1.3 JTD CDTI DDIS

Product code: W0494

Puller sleeve rear beam Front Bmw Series 5,6,7 / F 10, F11, F12, 13, F01 (33316790573, 33 31 6 775 780)

Product code: W0488

Puller / Adapter to pull the injector Renault 2.3 after 2012 (20mm)

Product code: W0467

Lock (adapter) flywheel BMW

Product code: W0460

Puller sleeve front beam Mercedes ML W163 (oe bushings 163 330 02 75/1633300275)

Product code: W0428

Puller arm sleeve Front Peugeot 406 ( oe. 352360 )

Product code: W0422

Lock Crankshaft VW AUDI V6 diesel; gasoline

Product code: W0418

The key to the timing belt ribbed Ford 2.0, 2.2, 2.4 TDDI / TDCI

Product code: W0296

Puller sleeve upper arm rear lateral (crescent / banana)

Puller sleeve upper arm rear lateral (crescent / banana) Ford Focus I, II Sedan, Combi, Ford C-Max, Mazda 3, 5; Volvo S40 II, V5

Product code: W0254

Adapter for injector pulling, 1.5 DCI Delphi (14x1.5) Renault, Nissan

Adapter for injector pulling, 1.5 DCI Delphi (14x1.5) Renault, Nissan

Product code: W0248

Adapter for testing fuel injection Diesel trucks

Adapter for testing fuel injection Diesel trucks MAN 2866, 2566, DB OM 401, 421, 441

Product code: W0145

Press, puller for bolts (W0027, W0102, W0116), Mercedes, VW, Opel etc.

Press, puller for bolts (W0027, W0102, W0116), Mercedes, VW, Opel etc.

Product code: W0133

Timing tool set VW/AUDI 2.3/2.8, petrol (2002-2005)

Timing tool set VW/AUDI 2.3/2.8, petrol (2002-2005)

Product code: W0118

Sleeve puller suspension arms, front BMW E39

Sleeve puller suspension arms, front BMW E39 - 520d, 520i, 523i, 535d, 525i, 525td, 525tds, 528i

Product code: W0057

Timing tool set, Fiat Ducato, Iveco Daily 2.3 and 3.0 JTD

Timing tool set for Fiat Ducato, Iveco Daily 2.3 and 3.0 JTD diesel engines.

Product code: W0042

Fuel line pliers

Fuel line pliers for removal and replacement of the connections on the in-line fuel filter. Required when replacing the fuel filter or during engine repairs. Suitable for VW, Audi, Mercedes, Fiat, Opel/GM.

Product code: JBM53487

Suspension bushing puller, Opel Vectra B, BMW E36

Ideal for the removal and refitting of the suspension bushes without removing the trailing arm assembly from the vehicle.

Product code: W0001

Universal injector extractor set

Universal extractor set for pulling out engine injectors. Includes adaptors for Bosch, Delphi, Denso and Siemens injectors.

Product code: C04/0027

Rear crankshaft rear oil seal replacement tool for 3.0 HPI / HDI engines

Rear crankshaft rear oil seal replacement tool for Iveco, Fiat Ducato, Peugeot Boxer, Citroen Jumper 3.0 HPI / HDI engines.

Product code: C05/0202

Refractometer optical fluid tester

Professional optical fluid tester, automotive refractometer is used to measure the freezing temperature of the refrigerant fluid, washer fluid and electrolyte density.

Product code: CKB04033

Opel 1.0, 1.2, 1.4 turbo engine timing tools set

For Opel 1.0, 1.2 and 1.4 twin cam turbocharged, chain driven, petrol engines. The kit is suitable for fixing the camshaft and the crankshaft position when removing and replacing the timing chain.

Product code: CKBA2193

Cylinder pressure test set

A tester that allows you to quickly and easily diagnose leaks in the combustion chamber.

Product code: G02735

23pcs oil filter wrench set

Set of 21 sockets for unscrewing oil filters. It fits most passenger cars produced on the European, American and Asian markets.

Product code: G10402

Sleeve puller, rear beams, BMW E39 sedan

Sleeve puller, rear beams, BMW E39 sedan

Product code: W0096

Seal and plug removal hook set

Seal and plug removal hook set. 3 pcs. (15.5, 16.5, 12cm)

Product code: JBM53053

Clutch centering mandrel, 2pcs

2pcs clutch centering mandrel, Ø20-26mm, Ø15-19mm

Product code: JBM53392

Timing tool set 1.4 1.6 FSI VW/AUDI/SKODA

Timing tool set 1.4 1.6 FSI VW/AUDI/SKODA

Product code: W0026

Bearing puller set, 9pcs

It’s ideal for removing small gears, wheels, and fittings from shafts also can be used to replace the steering pump, perfect for wiper arm assembly, rebuilding your alternator, removing tightly fitted pulleys, and reaches places that regular gear pullers can’t access.

Product code: DK-230590

Slide hammer, weight 2.5kg, M12/M16

Slide hammer, weight 2.5kg, M12/M16

Product code: W0067

Service wrench for initial chamber 1/2", 60mm

Service wrench for initial chamber 1/2", 60mm

Product code: W0081

Puller for belt pulleys, four-arm, 60mm

Puller for belt pulleys, four-arm, 60mm

Product code: W0089

Jointed glow plug socket set, 8-16mm

Jointed glow plug socket set, 3/8", length 158mm, sizes 8, 9, 10, 12, 14, 16mm

Product code: MG50377

Puller sleeve rear beam (small) for BMW X5 E53, M57 etc.

Puller sleeve rear beam (small) (No. oe 33 17 6 770 457) for BMW X5 E53, M57, M57N, M54 etc

Product code: W0250

Timing tool set, Fiat and Iveco 2.3, 3.0 JTD

Timing tool set for Fiat and Iveco 2.3, 3.0 JTD engines.

Product code: W0078

Press for upper bolts T4, Master, Movano, Interstar and lower bolts Sprinter, VW LT

Press for upper bolts T4, Master, Movano, Interstar and lower bolts Sprinter, VW LT

Product code: W0093

Lock balancer shaft BMW N20 / N26 + Repair kit seal oil pump

Product code: W0618

Glow plug reamer, 7mm

Tool for reaming broken glow plug shafts. Diameter: 7mm. Length: 11cm.

Product code: W0632

Central bolt puller upper arm VW, Audi after 2005

Central bolt puller upper arm VW, Audi after 2005

Product code: W0164

Sleeve puller, rear beams BMW E39 (sleeve oe no. 3317 1090 389)

Sleeve puller, rear beams BMW E39 (sleeve oe no. 3317 1090 389)

Product code: W0165

Puller bushings rear beam Renault Laguna II set (5 adapters to org and not of original sleeves)

Product code: W0330

Denso injector valve wrench

3-pin key for removing and installing the return valve on Denso Common Rail diesel injectors.

Product code: W0391

Puller sleeve rear beam AUDI A4, A4 Avant 94-01 (only for pressing)

Product code: W0421

Puller for hub booster pumps

Product code: W0430

Timing lock for BMW 2.5 and 3.0 N51, N52, N52K, N53, N54 engines

Timing lock for BMW 2.5 and 3.0 N51, N52, N52K engines with Valvetronic and N53, N54 engines with direct injection.

Product code: C01/0023

The cap / wrench for loosening the hub nut Land Rover DEFENDER 1999-2016. ( nut number RFD100000)

Product code: W0642

Puller synchronizer gearbox Volvo AT03112C