Ball joint separator and installer tool set

Product description

This ball joint tool kit is suitable for removing and fitting press-fit type ball joints without removing the vehicle's control arm. This set includes all essential receiver tubes and removing/installing adapters for press-fit upper and lower ball joints on most cars, vans, and light trucks. The pressing device's gap size is 152mm.

Application

Most US brands such as GM, Ford, Dodge 2WD and 4WD pick-ups (1997), as well as for many European delivery vans and SUVs.

Contents and sizes

• C frame pressing device
• Receiving adapter (tube) 44.5 x 50.8mm (1-3/4" x 2")
• Receiving adapter (tube) 44.5 x 63.5mm (1-3/4" x 2-1/2")
• Receiving adapter (tube) 57.2 x 76mm (2-1/4" x 3")
• Threaded pressing head
• Screw 22.2mm (7/8")
• Receiving adapter (tube) 57.2 x 63.5 x 19mm (2-1/4" x 2-1/2" x 3/4") 
• Receiving adapter (cup) 50.8 x 57.2 x 50.8mm (2" x 2-1/4" x 2" )
• Receiving adapter (cup) 44.5 x 54 x 12.7mm (1-3/4" x 2-1/8" x 1/2")
• Remover/installer 19 x 36.5 x 25.4mm (3/4" x 1-7/16" x 1")
• Receiving adapter (cup) 31.8 x 63.5 x 38mm (1-1/4" x 2-1/2" x 1-1/2")
• Receiving adapter (tube) 36.5 x 70 x 57.2mm (1-7/16" x 2-3/4" x 2-1/4")
• Receiving adapter (tube) 70 x 76.2 x 57.2mm (2-3/4" x 3" x 2-1/4")
• Receiving adapter (cup) 50.8 x 57.2 x 50.8mm (2" x 2-1/4" x 2")
• Receiving adapter (tube) 57.2 x 63.5 x 70mm (2-1/4" x 2-1/2" x 2-3/4")
• Receiving adapter (cup) 44.5 x 57.2 x 8mm (1-3/4" x 2" x 2-5/16")
• Receiving adapter (cup) 66.7 x 73 x 98.5mm (2-5/8" x 2-7/8" x 3-7/8")
• Receiving adapter (cup) 55.5 x 62 x 81mm (2-3/16 x 2-7/16" x 3-3/16")
• Receiving adapter (cup) 44.5 x 50.8 x 76.2mm (1-3/4" x 2" x 3")