Wrench for the front swingarm pivot pin caps on Citroen, Peugeot, Toyota

Timing tool set for Alfa, Fiat, Opel 1.7, 1.9, 2.0 TD/JTD, 2.4 JTD

Timing tool set for Alfa Romeo, Fiat, Opel, Saab, Lancia 1.7, 1.9, 2.0 TD/JTD, 2.4 JTD

Product code: W0035

Puller arm forward bushing Renault Laguna I (under a hydraulic press)

Puller arm forward bushing Renault Laguna I (under a hydraulic press) (nr. oe 77 00 822 503)

Product code: W0170

Puller arm forward bushing Renault Laguna I

Puller arm forward bushing Renault Laguna I (nr. oe 77 00 824 042)

Product code: W0171

Rear beam bushing puller BMW E32 / E34 (nr. oe 3331112670)

Rear beam bushing puller BMW E32 / E34 (nr. oe 3331112670)

Product code: W0181

Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot

Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot

Product code: W0195

Lock timing Volvo V8 4.4

Product code: W0659

Crankshaft lock BMW, Mini B37 B38 B47 B48 B58

Product code: W0607

Denso injector adapter puller M20x1 (hardened)

Product code: W0639

Fuel filter wrench for Ford Transit 2.2 TDCI

Fuel filter wrench for Ford Transit and Tourneo 2.2 TDCI.

Product code: W0625

Locking balancing shafts Citroen, Peugeot, Ford, Land Rover 2.2

Product code: W0611

Fuel filter key for Volvo S60, V50, XC90, S80, C30, C70 engines

The diesel fuel filter wrench is for the removal and installation of the fuel filter on Volvo diesel engines.

Product code: W0593

Lock timing Mercedes M112 / M113

Product code: W0591

Short bolt M12 L 150 mm / used in sleeve pullers

Product code: W0530

Lock timing Mercedes M271: E18ML DE18ML E16ML Gasoline compressor

Product code: W0555

Lock timing Jeep Grand Cherokee CRD; Grand Cherokee Multijet 3.0 CRD V6

Product code: W0563

Locking pin for Renault and Nissan 1.6 DCI R9M timing locks

Locking pin for Renault Megane, Scenic, Grand Scenic, Nissan Qashqai , Qashqai 2, 1.6 DCI R9M engine timing tool.

Product code: W0553

Puller injectors Fiat Opel 1.9 JTD; CDTI

Product code: W0551

Socket wrench for setting the variable valve timing in Audi, VW, Seat, Skoda 1.8, 2.0 TSI

Camshaft adjustment socket wrench for Audi, VW, Seat, Skoda 1.8, 2.0 TSI. Valve OEM number: 06L109257B.

Product code: W0540

Puller Injectors Chrysler Voyager 2.5; 2.8 CRD

Product code: W0538

Puller adapter for Denso M25x0.5 Toyota and Mazda injectors

Puller adapter for Denso M25x0.5 Toyota and Mazda injectors

Product code: W0534

Silent puller for VW, Audi, Seat, Skoda engines and gearboxes

Allows the replacement of engine and gearbox silent blocks in VAG engines.

Product code: W0521

Puller sleeve back beam (middle) BMW 5 (E 60, E61) BMW 6 (E63, E64) (oem 33176770825)

Product code: W0520

Key for setting the crankshaft Fiat; Opel 1.3 CDTI

Product code: W0512

Puller hub bearing the brake disc Ford Transit

Product code: W0500

Key oil filter Fiat, Opel, Alfa Romeo 1.3, 1.6, 1.9. 2.0 - 75.3 x 16 hexagonal

Product code: W0484

A key for locking the pulley shaft Opel / Renault

Product code: W0495

Puller sleeve rear beam back Bmw Series 5,6,7 / F 10, F11, F12, 13, F01 (33 31 6775792, 33 31 6 793 864)

Product code: W0490

Lock crankshaft BMW 1.6 / 2.0 / 3.0 - N47 / N57

Product code: W0489

Lock Timing BMW 2.5 / 3.0 Petrol; Engines N51, N52, N52K, N53, N54 (timing chain)

Product code: W0382

Lock belt pulley shaft Ford 1.6

Product code: W0459

A/C clutch hub removal tool, 21mm (hardened)

Fits universally for Audi, BMW, Mercedes-Benz, Porsche, Smart, Volkswagen, Skoda, Seat, Cadillac, Chevrolet, Vauxhall, Ford, Dodge, Jeep, Alfa Romeo, Fiat, Lancia, Opel, Suzuki, Peugeot, Citroen, Renault, Mitsubishi, Toyota, Puch, Proton, Hyundai, etc. models and makes.

Product code: W0445

Adapter / puller injector BMW 1.8 / 2.0 N47

Product code: W0443

Tool to block the balance shafts BMW N40, N42, N45, N46

Product code: W0417

Lock, pin, shaft Ford 1.8 / 2.0

Product code: W0413

Set for knocking injectors Opel Renault 2.0 DCI / CDTI and others (hardened)

Product code: W0389

Universal fuel pump wrench 45-190mm

Universal fuel pump wrench 45-190mm.

Product code: W0387

Lock camshaft BMW N43 1.6, 2.0 (B16, B20 - on the chain)

Product code: W0347

Timing lock for Citroen, Peugeot 1.8, 2.0 16V engines

Timing lock for Peugeot and Citroen gasoline engines 1.8 16V, 2.0 16V and 2.2 16V manufactured starting from 1999.

Product code: W0346

Timing lock for Ford, Mazda petrol Zetec engines

Camshaft locking bar and 3 pins. For 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V and 1.8 TDI petrol engines.

Product code: W0333

Lock injection pump Renault, Volvo, Opel 1.9 D / TD (brass)

Product code: W0319

Injector puller for Fiat Ducato, Iveco Daily, Iveco Turbo Daily 2.3, 2.8, 3.0

Injector puller for Fiat Ducato, Iveco Daily, Iveco Turbo Daily 2.3, 2.8, 3.0 (from 1999 onwards).

Product code: W0310

Timing tool set Fiat Coupe/Barchetta, Lancia, Alfa 1.8 16V (Grey)

Timing tool set Fiat Coupe/Barchetta, Lancia, Alfa 1.8 16V (Grey)

Product code: W0272

Timing tool for Audi, VW 3.3, 3.7, 4.2 A6 A8

Timing tool for Audi, VW 3.3, 3.7, 4.2 A6 A8.

Product code: W0270

Timing tool set, Renault, Nissan, Opel, 1.6 16V engines

Timing tool set, Renault, Nissan, Opel, 1.6 16V engines.

Product code: W0260

Timing tool set Chevrolet, Opel Antara 2.0 Diesel common rail

Timing tool set Chevrolet Nubira, Evanda, Captiva, Opel Antara 2.0 Diesel common rail

Product code: W0256

Timing tool set Fiat Bravo, Brava, Marea, Lancia Delta, Debra 1 set

Timing tool set Fiat Bravo, Brava, Marea, Lancia Delta, Debra 1 set. - Petrol 1.8 16V 115 PS (green)

Product code: W0240

Wrench for injection pumps, hexagon 13mm

Wrench for injection pumps, hex 13mm, drive diam. 12mm, 9x7mm rectangular fixing, hardened

Product code: W0234

Timing tool set Alfa Romeo 145, 146, 147, 155, 156, 1.4, 1.6 16V TS

Timing tool set Alfa Romeo 145, 146, 147, 155, 156 (1996-2008) 1.4, 1.6 16V TS

Product code: W0232

Timing tool set Audi A8 3.7 / 4.2 V8 (engine ABZ, AEW, AHC)

Timing tool set Audi A8 3.7 / 4.2 V8 (engine ABZ, AEW, AHC)

Product code: W0227

Adapter for injector pulling Opel DTI - diesel

Adapter for injector pulling Opel DTI - diesel

Product code: W0226

Adapter for injector pulling Opel Vivaro 2.0 CDTI - hardened

Adapter for injector pulling Opel Vivaro 2.0 CDTI - hardened

Product code: W0225

Injector puller DTI Opel - Diesel common rail

Injector puller DTI Opel - Diesel common rail

Product code: W0221

Injector puller Opel Vivaro 2.0 CDTI

Injector puller Opel Vivaro 2.0 CDTI

Product code: W0220

Timing tool set for Chrysler, Jeep 2.5, 2.8 CRD

Timing tool set for Chrysler Voyager, Jeep Cherokee 2.5, 2.8 CRD diesel belt driven engines.

Product code: W0218

Timing tool set VW LT 2.8 TDI

Timing tool set VW LT 2.8 TDI + special wrench for the camshaft

Product code: W0189

Timing tool set VW Transporter / Touareg / Phaeton, 2.5 TDI PD

Timing tool set VW Transporter / Touareg / Phaeton, 2.5 TDI PD

Product code: W0199

Puller arm sleeve Volkswagen T5 - rear arm

Puller arm sleeve Volkswagen T5 - rear arm

Product code: W0191

Timing tool set Alfa Romeo 1.8 / 2.0 16V, 2.0 TS (blue)

Timing tool set Alfa Romeo 1.8 / 2.0 16V, 2.0 TS (blue)

Product code: W0169

Universal puller small metal-rubber sleeve

Universal puller small metal-rubber sleeve. Length: up to 54, external diam. 34mm, internal diam. 24mm

Product code: W0167

Oil drain repair cutter, Volkswagen

Oil drain repair cutter, Volkswagen

Product code: W0166

Timing tool set for Renault 2.0, 2.3 DCI and CDTI

Timing tool set for Renault, Nissan, Opel 2.0, 2.3 DCI and CDTI

Product code: W0153

Timing tool set Renault Laguna, Megane II 2.0 IDE F5R

Timing tool set Renault Laguna, Megane II 2.0 IDE F5R

Product code: W0152

Adapters for press, puller for bolts VW T4, LT, Mercedes Sprinter

Adapters for press, puller for bolts VW T4, LT, Mercedes Sprinter

Product code: W0147

Key to the wheel hub assembly Mercedes, inner diam. 55mm

Key to the wheel hub assembly Mercedes, inner diam. 55mm

Product code: W0146

VCT alignment tool for Ford 1.6 Ti-VCT Focus, C-Max

VCT alignment tool for Ford 1.6 Ti-VCT Focus, C-Max. Engine code: HXDA. OEM: 303-1097.

Product code: W0127

Press for dismantling and mounting of lower bolts, IVECO

Press for dismantling and mounting of lower bolts, IVECO

Product code: W0115

Wrench for injection pumps, hexagon 14mm

Wrench for injection pumps, hexagon 14mm, guidance diam. 9mm, triangular fixing

Product code: W0112

Wrench for injection pumps, hexagon 15mm

Wrench for injection pumps, hexagon 15mm, guidance diam. 15mm, rectangular fixing

Product code: W0111

Sleeve puller, rear beams FIAT Panda 2003-

Sleeve puller, rear beams FIAT Panda 2003-

Product code: W0107

Adapters for press, puller for bolts, Master, Movano, Interstar

Adapters for press, puller for bolts, Renault Master, Opel Movano, Nissan Interstar

Product code: W0098

Press, puller for bolts of suspension arm Master/Movano/Interstar

Press, puller for bolts of suspension arm Master/Movano/Interstar (upper and lower)

Product code: W0100

Wrench for rim unscrewing, ABS Renault Maskot, Master

Wrench for rim unscrewing, ABS Renault Maskot, Master

Product code: W0095

Injector puller adapter, VW TDI PD

Adapter for injector pulling, VW TDI PD.

Product code: W0094

Puller for suspension arm sleeves – front, BMW E 39 M5

Puller for suspension arm sleeves – front, BMW 5 (E39), 01.96-06.04 535i/540i/M5 BMW 7 (E38), 04.94-12.01

Product code: W0086

Two-pieces wrench for truck injectors - Mercedes, Man (Euro-2)

Two-pieces wrench for truck injectors - Mercedes, Man (Euro-2). Edzett, 4 fogú, két részes (32mm, 22mm), belső hüvely átmérő 22mm. M14 menetes

Product code: W0074

Puller for belt pulleys, three-arm

A puller for removing gears. Central screw diameter: 16mm. Adjustable clamping diameter: 42-82mm. Arm length: 35mm. Full length: 55mm.

Product code: W0068

Valve sealing install set, 6mm, 7mm, 8mm, universal

Valve sealing install set, 6mm, 7mm, 8mm, universal

Product code: W0059

Press, puller for bolts, Renault Master, Opel Movano

Press, puller for bolts, Renault Master, Opel Movano

Product code: W0045

Tool for setting the upper dead point of the piston Fiat, Alfa, Lancia

Tool for setting the upper dead point of the piston Fiat, Alfa, Lancia

Product code: W0041

Timing tool set, VW, Seat, Skoda 1.2 6V and 12V

A set of timing locks for 3-cylinder VW Seat Skoda 1.2 6/12V (chain driven) engines.

Product code: W0031

Timing tool set 1.4 1.6 FSI VW/AUDI/SKODA

Timing tool set 1.4 1.6 FSI VW/AUDI/SKODA

Product code: W0026

Timing lock set for Renault, Nissan, Opel and Dacia

Timing lock Renault 1.4, 1.6, 1.8, 2.0 16V dCI gasoline enginesand 1.5 diesel engines.

Product code: W0011

Timing tool set, Fiat 1.6 16V with belt tensioner

Timing tool set, Fiat 1.6 16V with belt tensioner. Fiat: Brava/Bravo, Doblo/Cargo, Marea/Weekend, Multipla, Palio Weekend, Siena, Stilo, Lancia: Delta, Lybra.

Product code: W0009

Car wheel dolly

Allows movement of vehicles wit damaged, stuck wheels by placing the dolly directly under the wheel. Loading capacity 680kg, clamping size 305mm(12").

Product code: TL2005-2

Engine timing lock set for Ford, Mazda, Peugeot, Citroen 1.4 and 1.6 diesel

Engine timing lock set for Ford, Mazda, Peugeot, Citroen 1.4 and 1.6 diesel.

Product code: C01/0017

Camshaft lock for Volvo 2.5 Turbo petrol engines

Camshaft lock for Volvo and Ford 2.5 Turbo petrol engines. (S40, S60, S80, V50, V70, C70, XC70, XC90, Ford Focus, S-Max, Galaxy, Mondeo).

Product code: C01/0114

Crankshaft lock for BMW and Mini petrol and diesel engines (2014-)

Locks the crankshaft pulley in BMW and Mini petrol engines B38, B48, B58 and diesel engines B37, B47, B57.

Product code: C01/0224

Hex key for Bosch injector valve

H10 hex wrench with a 7.5mm hole for disassembly of Bosch injector valves.

Product code: C04/0087

Fish tape, 30m, red

30m steel cable fish tape in plastic red case. Flat metal tape, size 3x1mm. Insertion head size 40x10x3mm.

Product code: FT100-RED

Ball joint seperator for pin diameters up to 19mm

Professional ball joint pin puller. It is made of durable, high-quality tool steel. It is adapted to work with pins with a diameter of not more than 19mm.

Product code: G02587

Alternator key with 6 point 17mm outter drive. Length 30mm

Bosch alternator clutch wrench. A specialist wrench for assembly and disassembly of the pulley clutch of Bosch alternators.

Product code: G02782

Car mini bladed fuse set, 140pcs

Car mini bladed fuse set, 140pcs

Product code: G02825

Multifunctional socket wrench 48in1. Socket diameters: 8-19mm

It can replace wrenches intended for 12-point, 6-point, 4-point, E-Torx and spline screws and nuts.

Product code: G15030

Press the down crossover pins Jeep Cherokee, Grand Cherokee, Wrangler

Product code: W0399

Timing chain and camshaft locking tool set for Mercedes engines

This timing chain and camshaft locking tool set is to be used on M271, DE18ML, E16ML, DE18LA, 4 cylinder, 2003-2005 Mercedes engines.

Product code: MG04A2121

Camshaft lock for BMW engines M52, M54, M56

Camshaft lock for BMW Vanos engines M52, M54, M56. Tools for setting variators, cylinders, chain, main chain tension and the chain tensioner lock. 

Product code: C01/0010

Timing lock for Opel engines 1.3 CDTi

A set of tools for setting, adjusting and locking the engine timing on the latest 1.3 CDTi (2015-2018) diesel engines in Opel cars.

Product code: C01/0228

Ball joint removal tool set

Designed for easy removal of most popular types of pitman arms, tie rods and ball joints. Operation range: 17, 19, 21, 23, 27mm

Product code: CKB04340

Rear Suspension Bush Puller Ford Mondeo

Rear Suspension Bush Puller Ford Mondeo

Product code: W0020

Fish tape, 30m, green

30m steel cable fish tape in plastic green case. Flat metal tape, size 3x1mm. Insertion head size 40x10x3mm.

Product code: FT100-GREEN

Hydraulic jaw puller kit 5t

Multi-function puller with adjustable two or three leg function. Allows bearings, gears, etc. to be easily removed with minimal effort by use of the hydraulic puller.

Product code: G00910

CV joint clamp banding tool

CV joint clamp banding tool is suitable for installation and tightening of band-style clamps on CV joint boots, power steering rack and pinion steering gear boots.

Product code: G01653

CV boot clamp pliers (ear type)

CV boot clamp pliers suitable for Oetiker CV drive shaft boot securing clips. Plier's plate presses a flat on the top of the clip so that it forms the spring loop correctly.

Product code: G01656

Tube flaring set 3-19mm

Tube flaring set for tubes with diameters: 3, 5, 6, 8, 10, 12, 15, 16, 18, 19mm.

Product code: G02720

Puller sleeve front beam Renault Laguna II / Trafic II (oe sleeves 8200000512)

Product code: W0368

Pin to the crankshaft Ford Fiesta 1.25, 1.4, 1.6 Zetec, Duratec

Product code: W0406

Adapters to bolts down Jeep - Cherokee, Grand Cherokee, Wrangler

Product code: W0398

Universal socket adapter 7 to 19mm diameters

Universal socket adapter. For nuts and bolts with 7 to 19mm diameters.

Product code: G15021

Lock Flywheel Renault 1.2 / 1.6 Petrol, 1.9 D / TD

Product code: W0327

Timing lock set for Ford, Mazda, Volvo 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V

Timing lock set for Ford, Mazda, Volvo 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V. Locking pin for the shaft and two camshafts and pins for blocking the crankshaft.

Product code: C01/0002

Timing lock set for Citroen, Peugeot, Fiat, Iveco, Renault, Opel

Timing lock set for Citroen, Peugeot, Fiat, Iveco, Renault, Opel 2.5, 2.8 diesel engines.

Product code: C01/0015

Timing lock set for Ford 1.0 EcoBoost (Fox) LT

Ford timing lock for 1.0 Eco Boost (Fox) LT engines from 2018.

Product code: C01/0229

Engine timing kit for Hyundai, Kia 1.6 Diesel engines

Engine timing kit for Hyundai, Kia 1.6 CRDi, D4FE, D4FE (U3) Diesel engines.

Product code: C01/0231

Renault and Peugeot rear axle bush remover and installer

Designed for the removal, installation and alignment of rear axle bushes on Renault Laguna II and Peugeot 207.

Product code: C02/0094

Engine timing tool kit for BMW S54 engines

Specifically designed for the popular BMW M3 fitted with the chain driven 3.2 litre 6 cylinder 24-valve petrol engines. Engine code S54 (32 6S 4)

Product code: CKB01062

Lock Belt VW / Audi / Seat / Skoda 1.8 FSI / TFSI

Product code: W0317

Stud Wrench 8" 12-21mm

Fully adjustable with a one-handed squeeze. Efficient ratcheting by releasing, then re-gripping the object. Often removes nuts and bolts damaged by other tools.

Product code: G00860

Vacuum gauge and fuel pump pressure tester set with adapters

Measures vacuum up to 70cmHg and pressure up to 0.7bar. Fittings included for compatibility with most cars.

Product code: G02508

Universal three arms oil filter wrench 3/8" (65-130mm)

Oil filter wrench with 3 arms can be adjusted from 65 - 130mm in diameter. Comes with an adapter so it fits any 3/8" and 1/2" square drive ratchets or extensions.

Product code: G02550

Oil drain pan 10L

A container ideal for the recovery of oil and antifreeze liquids.

Product code: G02634

Tube flaring tool set with pipe cutter

Tube flaring tool set with pipe cutter. For tube sizes: 5, 6, 8, 10, 12, 14, 18mm.

Product code: G02722

Wiper arm puller

Wiper arm puller. The puller is used to remove car wiper arms. Made of durable chrome-molybdenum steel.

Product code: G02770

14pcs E4-E24 Torx socket set

14pcs E4-E24 Torx socket set. Use with 1/2", 3/8", 1/4" drives.

Product code: G13566

Pilot bearing puller. For bearing with inner diameters: 12-38mm

Suitable for removing tight fitted sleeve type bearings and bushings with inner ring diameters of 12 to 38mm.

Product code: G30300

Press the king pins the upper and lower Jeep - Cherokee, Grand Cherokee, Wrangler

Product code: W0401

Puller for wheel hub / bearing VW Polo, Seat, Skoda, Audi A2-puller with ABS and without ABS

Product code: W0306

Camshaft, crankshaft and chain locking tool for BMW, Mini 1.4 and 1.6 16V

Camshaft, crankshaft and chain locking tool for BMW, Mini with 1.4 and 1.6 16V engines.

Product code: C01/0115

Timing lock for Ford, Fiat, Citroen, Peugeot 2.2 TDCI engines

Timing lock for Ford, Fiat, Citroen, Peugeot 2.2 TDCI engines.

Product code: C01/0179

BMW and Mini timing lock N13, N18 1.6 pre-tensioning tool set

Timing lock set for BMW and Mini petrol engines N13,N18 timing chains.

Product code: C01/0222

Bushing and silent press for Mercedes, VW, Renault, Opel, Nissan

The tool is used for pressing in and out the pins and silents without the disassembly of the control arm, thus saving you time and energy.

Product code: C02/0140

Hydraulic jaw puller set 10t

Multi-function puller with adjustable two or three leg function. Allows bearings, gears, etc. to be easily removed with minimal effort by use of the hydraulic puller.

Product code: G00911

Oil funnel with built in filter

Oil funnel with built in filter and flexible hose. Dia.: 140mm

Product code: G02150

Hook and pick set, 9pcs

Hook and pick set for removing oil seals, o-rings and gaskets

Product code: G02708

Hook and pick set 6pcs (Lenght: 240mm)

Hook and pick set for removing seals, O-rings and gaskets.

Product code: G02706

Alternator clutch key with socket stem

A key dedicated to alternators with a clutch, enabling unscrewing the bolt securing the pulley for easy removal of the V-belt.

Product code: G02783

5pcs strut nut tool set for Audi, VW and Mercedes

A set of nut tools for tightening and loosening shock absorber mounts.

Product code: G02785

Car non-insulated terminal connector set, 750pcs

Car non-insulated terminal connector set, 750pcs

Product code: G02828

Heat shrink tubes with tin, 50pcs set

The use of tin shrinkable tubing allows for a durable and waterproof connection of two wires, which is possible thanks to the inner layer of glue.

Product code: G03607

Universal socket adapter 7 to 19mm diameters

The universal socket is designed to automatically adjust to fit any nut or bolt with 7 to 19mm (1/4" to 3/4") diameters.

Product code: G15020

Pilot bearing puller. For bearing with inner diameters: 12-38mm

Suitable for removing tight fitted sleeve type bearings and bushings with inner ring diameters of 12 to 38mm.

Product code: G30301

Puller for wheel hub / bearing Ford Focus II, C-Max, Volvo, Mazda 3,-puller with ABS and without ABS

Product code: W0305

Sleeve puller for Opel rear beams

Rear bushing puller for Zafira B, Astra H, Meriva. For the assembly and disassembly of sleeves in cars.

Product code: W0372

Rear beam silent puller for Renault Laguna III and Laguna Coupe

Rear beam bushing puller for Renault Laguna III and Laguna Coupe. OEM: 55 04 400 01R, 55 04 466 24R, 55 04 500 01R.

Product code: W0503

Oil filter wrench for Toyota, Lexus, Scion, 80mm

Oil filter wrench for Toyota, Lexus, Scion, Daihatsu, Subaru, Pontiac cartridge oil filters, 80mm.

Product code: W0687

Adapter set for pulling Bosch injector M17x1

Adapter set for pulling Bosch injector M17x1.

Product code: W0596

Camshaft pulley holding wrench Audi, VW, Seat, Skoda 1.0, 1.2, 1.4, 1.6 TSI

Crankshaft pulley (vibration damper) holding tool for crankshaft pulley replacement on 1.0, 1.2, 1.4, 1.6 TSI engines. Designed for VAG group cars.

Product code: W0679

Crankshaft rear oil seal replacement tool for VW 2.5 TDI engines

Crankshaft rear oil seal replacement tool for VW Crafter 5-cylinder diesel engines 2.5 TDI common rail (2006-2013).

Product code: C05/0084

Fish tape, 60m, red

60m steel cable fish tape in plastic red case. Flat metal tape, size 3x1mm. Insertion head size 40x10x3mm.

Product code: FT200-RED

Two jaw gear and bearing puller. Operating range: up to 200mm

Two jaw gear and bearing puller with adjustable clamping depth and width. For both internal and external bearings.

Product code: G02202

Bearing and gear puller with 3 jaws. Working range: up to 4" (102mm)

Bearing and gear puller with 3 jaws. Working range: up to 4" (102mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02242

Ball joint and silent block remover/installer set

Suitable for any passenger car, utility trucks and SUV vehicles, in which the ball joints have an interference fit. The tools allow for easy removal and installing without large-scale demounting.

Product code: MG50042

Universal bearing removing/installing kit, 34-84mm

Spindle: M10xP1.5, M12xP1.75, M14xP2.0, M16xP2.0, length/Ø A 44/34, 46/36, 54/44, 56/46, 58/48, 66/56, 68/58, 70/60, 78/68, 80/70, 84/72, B 48/38, 50/40, 52/42, 60/50, 62/52, 64/54, 72/62, 74/64, 76/66mm

Product code: MG50093

Front wheel drive kit, 55.5-91mm, axle 380mm

Sizes(d) 55.5, 59, 62, 65, 66, 71.5, 73, 78, 84, 86, 91mm, axle 380mm

Product code: MG50405

Piston ring compression set

Piston ring service tool set for install piston rings; 3 pcs piston ring plates/compressors; 1 piston ring expander; Piston ring groove cleaner; 3 blades

Product code: JBM53251

Heat shrinkable solder sleeve set 100pcs

Allows an easy and quick connection of cables, soldering and sealing by placing the cables in the solder sleeve for the subsequent heat application. For wire 0.25-6.0mm2 (26-10AWG)

Product code: JBM53992

Valve lapping tool set for drills, 6pcs

This tool smoothens the surfaces of new valves, ensuring that they fit firmly into the cylinders. Suction cup diameters: 16, 20, 30, 35, 40mm.

Product code: JBM54033

Valve stem seal pliers

For replacing valve stem seals.

Product code: MG50106

Bearing separator set

Bearing separator set, capacity 30-50mm, 50-75mm, 2 separators, 1 forcing screw, 4X2 extensions

Product code: MG50132

Brake cylinder wind-back tool

Brake cylinder wind-back tool, for Audi, Ford, Honda, Jaguar, Mazda, Mitsubishi, Nissan, Rover, Saab, Subaru, Toyota, VW

Product code: MG50407

Viscous clutch wrench Mercedes Sprinter 906 218, 318, 418, 518 CDI

Viscous clutch wrench Mercedes Sprinter 906 218, 318, 418, 518 CDI

Product code: W0239

Puller sleeve rubber front, rear sleds BMW Series 5, 6, 7 (33316775781, 33316792873)

Product code: W0444

Timing belt tightener for VAG car engines

Timing belt tensioner wrench for VAG car engines.

Product code: W0039

Slide hammer M12/16, ⌀85mm, weight 1,3 kg

Slide hammer M12/16, ⌀85mm, weight 1,3 kg

Product code: W0048

Puller sleeve rear beam Opel Zafira A; Astra G; Combo; Meriva A (oe number 402644)

Product code: W0371

Crankshaft rear oil seal replacement tool for Iveco, Fiat, Citroen Peugeot 3.0

Crankshaft rear oil seal replacement tool for Iveco, Fiat, Citroen Peugeot 3.0, 13x12.5 (Corteco, DT, LEMA, Ajusa)

Product code: W0522

Glow plug reamer, 9mm, length 175mm

Tool for reaming broken glow plug shafts. Diameter: 9mm. Length: 175mm.

Product code: W0637

Universal puller (screw L=100mm, hole distance 27-62mm)

Universal puller (screw L=100mm, hole distance 27-62mm)

Product code: W0136

Crankshaft front oil seal puller for Iveco 3.0

Crankshaft front oil seal puller for Iveco 3.0

Product code: W0434

Key viscous clutch Ford Transit 2.3 2.4 3.2 (2001 – 2006)

Product code: W0416

Adjustable clutch plate spanner wrench air conditioning

Product code: W0616

Timing lock for BMW M43, M70, M73 engines with timing chain

Timing lock for BMW M43, M70, M73 engines with timing chain.

Product code: C01/0050

Glow plug reamer, 11mm

Tool for reaming broken glow plug shafts. Diameter: 11mm. Length: 11cm.

Product code: W0634

Special wrench for turbocharger

Special wrench for turbocharger, 3/8", 12-pt, size: 12mm

Product code: MG50800

Silent puller for BMW E38, E39, E60, E63, E65, E53, X5, Z8 passanger cars

Extractor for removing and fitting the silent block on the rear axle link arm on BMW passanger cars.

Product code: W0087

Extra feet puller for beam puller (W0033)

Extra feet puller for beam puller (W0033)

Product code: W0150

Press, puller for bolts, 20 adapters Master, Movano, Iveco, Vw Lt etc.

Press, puller for bolts, 20 adapters Master, Movano, Iveco, Vw Lt, Ctrafter, Sprinter

Product code: W0162

Lambda probe socket set 7pcs

A set of professional sockets with special shapes and cuts for unscrewing lambda probes (oxygen sensors) and injectors without dismantling the wires.

Product code: G02687

Puller arm bushing rear Fiat Bravo II (No.sleeves 50700796 )

Product code: W0377

Puller sleeve rocker back Fiat Doblo 2010 - (oem sleeve FIAT 51930337)

Product code: W0523

The keys for locking the pulley shaft Mercedes M112, M113, M271, M272, M273, M642

Product code: W0604

Puller hub / bearing Mondeo IV; Focus II RS (FORD 1 463 833)

Product code: W0506

Front suspension bush axle beam tool L, R, Opel Astra G, H, Zafira

Front suspension bush axle beam tool Left, Right, Opel Astra G, H, Zafira (nr. oe 352 364)

Product code: W0175

Pin socket wrench arm Citroen / Peugeot 405 (hardened)

Pin socket wrench arm Citroen / Peugeot 405 (hardened)

Product code: W0194

Sleeve puller for Ford Mondeo MK 4 (2007- ) rear swingarm

Tool for assembly and disassembly of the sleeve without the need to disassemble the swingarm.

Product code: W0364

Ball joint, tie rod, and pitman arm separator set (5pcs)

Ball joint, tie rod, and pitman arm separator for cars and light trucks. 5pcs set. Forks are designed to interchange with either of the handles.

Product code: CKB04028

Inner bearing puller set. For diameters: 10-32mm

The internal bearing puller designed for dismounting internal bearings with an internal diameter of 10-32mm.

Product code: G02747

Bearing separator set

Bearing separator set, capacity 30-50mm, 50-75mm, 2 separators, 1 forcing screw, 4X2 extensions

Product code: JBM51125

Windshield wiper puller

Windshield wiper puller, max. diameter 45mm, min. diameter 17mm, simple handling, safe mechanism, design with thin legs and brass-finished ends. Weight 0.2kg.

Product code: JBM52454

Leak tester for cylinder head gasket

CO2 Combustion leak detect. This tool is designed to check for the leaks between combustion and cooling system of water-cooled engines. With 3 adapters.

Product code: MG04A4052

Sleeve and silent puller for BMW 1, 3, X1 rear arms

Sleeve and silent puller for BMW 1 3, X1 Hatchback, Coupe, Convertible, Saloon, Touring rear arms. (OE 33326763092)

Product code: W0587

Brake caliper sockets for Audi Q5, A4, A5

Designed to loosen or tighten brake caliper bolts in Audi vehicles.

Product code: W0552

Puller sleeve upper arm rear lateral (crescent / banana)

Puller sleeve upper arm rear lateral (crescent / banana) Ford Focus I, II Sedan, Combi, Ford C-Max, Mazda 3, 5; Volvo S40 II, V5

Product code: W0254

Fuel line pliers

Fuel line pliers for removal and replacement of the connections on the in-line fuel filter. Required when replacing the fuel filter or during engine repairs. Suitable for VW, Audi, Mercedes, Fiat, Opel/GM.

Product code: JBM53487

Rear crankshaft rear oil seal replacement tool for 3.0 HPI / HDI engines

Rear crankshaft rear oil seal replacement tool for Iveco, Fiat Ducato, Peugeot Boxer, Citroen Jumper 3.0 HPI / HDI engines.

Product code: C05/0202

Refractometer optical fluid tester

Professional optical fluid tester, automotive refractometer is used to measure the freezing temperature of the refrigerant fluid, washer fluid and electrolyte density.

Product code: CKB04033

Sleeve puller, rear beams, BMW E39 sedan

Sleeve puller, rear beams, BMW E39 sedan

Product code: W0096

Clutch centering mandrel, 2pcs

2pcs clutch centering mandrel, Ø20-26mm, Ø15-19mm

Product code: JBM53392

Bearing puller set, 9pcs

It’s ideal for removing small gears, wheels, and fittings from shafts also can be used to replace the steering pump, perfect for wiper arm assembly, rebuilding your alternator, removing tightly fitted pulleys, and reaches places that regular gear pullers can’t access.

Product code: DK-230590

Service wrench for initial chamber 1/2", 60mm

Service wrench for initial chamber 1/2", 60mm

Product code: W0081

Valve lapping tool set. Attachable to drills.

This tool smoothens the surfaces of new valves, ensuring that they fit firmly into the cylinders. With 4 different suction cups with 20, 30, 35, 45mm diameters.

Product code: CKBA2269

Sleeve puller, rear beams BMW E39 (sleeve oe no. 3317 1090 389)

Sleeve puller, rear beams BMW E39 (sleeve oe no. 3317 1090 389)

Product code: W0165

Puller for hub booster pumps

Product code: W0430

The cap / wrench for loosening the hub nut Land Rover DEFENDER 1999-2016. ( nut number RFD100000)

Product code: W0642

Puller synchronizer gearbox Volvo AT03112C

Product code: W0649

Compression test kit

For passenger cars, utility trucks, measuring range 0-20 bar, hose length 330 mm, quick coupler

Product code: MG50191

Petrol engine compression tester kit

Measuring range 0-21bar, straight extension, angled extension, extension hose, adapters M10x1.0, M12x1.25, M14x1.25, M18x1.5

Product code: MG50192

Clutch alignment tool set, 16 cone adapters

Aligning shaft, 16 cone adapters, for Audi, Citroen, Fiat, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Toyota, VW, Volvo

Product code: MG50362

Vacuum/pressure test kit

Vacuum range 0-1bar, pressure 0-3bar, tank (2x120ml), hose 600mm, couplers, adapters

Product code: MG50411

Timing tool set for Ford, Mazda

Camshaft and crankshaft locking tool for 1.25-2.0 diesel and petrol engines

Product code: MG50658

Crankshaft rear oil seal replacement tool for Iveco, Fiat Ducato 2.3 engines

Replacement tool for crankshaft rear oil seal tool for Iveco, Fiat Ducato 2.3

Product code: C05/0216

Rear crankshaft oil seal replacement tool for Iveco 3.0, Mitsubishi Fuso 3.0 Euro 5

Rear crankshaft oil seal replacement tool for Iveco 3.0, Mitsubishi Fuso 3.0 Euro 5

Product code: W0619

Piston ring groove cleaning tool set 4pcs

For the removal of carbon deposits from piston ring grooves. Three six sided wheel cutters cover all standard size piston grooves.

Product code: CKBA1040

Flaring tool kit for brake lines

For making ends of brake lines or copper, copper-nickel and thin-walled steel pipes. Adapters: 4.75, 6.35, 7.95, 9.50, 11.10, 12.70, 15.87mm

Product code: CKB09065

Press for bushings and silents for hydraulic cylinder 12T

Press for pins and bushings without adapters. Can be used with a hydraulic cylinder.

Product code: C02/0149

Hub Puller VW, Seat, Skoda-Puller with ABS and without ABS

Hub Puller VW, Seat, Skoda-Puller with ABS and without ABS

Product code: W0163

Steering rod wrench

Allows the inner tie rod to be removed and installed without removing the rack.

Product code: W0168

Sleeve puller, rear beams BMW E39 (sleeve oe no. 3317 1093 008)

Sleeve puller, rear beams BMW E39 (sleeve oe no. 3317 1093 008)

Product code: W0158

Puller sleeve right front beam Ford Focus II; III; C-Max; Volvo (no oe. 1326988, 4M515L021AB, 1326988, 23033, 30714550, FM-FOC5

Product code: W0370

Tool for setting the GMP Volkswagen 2.5 TDI

Product code: W0374

Adapter puller valve springs 16V

Product code: W0440

Puller hub / bearing Fiat Ducato Citroen Jumper

Product code: W0499

Key to block unscrewing of the pulley Mercedes-Benz M272 / M273 engine

Product code: W0677

Valve-spring compressor tool set

High capacity valve-spring compressor tool, for passenger cars, adjustable rod and arm

Product code: MG50103A

Puller bushings rear beam Renault Laguna II (to no of original sleeves with flat his back)

Product code: W0329

VW Crankshaft Sealing Flange Removing and Installing Tool (Petrol)

This crankshaft seal installer tool is designed for Volkswagen, Audi, Skoda 16v 1,4, 1,6 engines and it’s also used on Fiat BAG 1,6 engines.

Product code: MG04A1026

Timing tool set Volvo V 50 16 V 1.8 / 2.0 with chain - petrol

Timing tool set Volvo V 50 16 V 1.8 / 2.0 with chain - petrol

Product code: W0177

Key clutch viscotic Volkswagen Crafter 2.5 TDI

Product code: W0404

Valve-spring compressor tool set

High load capacity valve-spring compressor tool set, for passenger cars, adjustable rod and arm

Product code: MG50103

Hydraulic body repair kit 10t

Hydraulic push and pull rams, capacity 10t, thrust 135mm

Product code: TL0010-2

Universal clutch and clutch drive plate aligning kit

Clutch alingment tool set 16 adapters, 1 shaft.

Product code: CKB04227

Bearing and gear puller with 3 jaws. Working range: up to 6" (152mm)

Bearing and gear puller with 3 jaws. Working range: up to 6" (152mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02243

Universal press for bolts and sleeves

Universal, strengthened press for bolts and sleeves of trailing arms.

Product code: W0099

Stripper down the front of the arm sleeve, Opel Astra G, H, Zafira, Vectra B

Stripper down the front of the arm sleeve, Opel Astra G, H, Zafira, Vectra B (big tube)

Product code: W0190

10pcs bolt extractor set

Set for removing damaged nuts and bolts with sizes of 9 - 19mm.

Product code: G30032

Bearing and gear puller with 3 jaws. Working range: up to 3" (75mm)

Bearing and gear puller with 3 jaws. Working range: up to 3" (75mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02230

19pcs 1/2" socket set for 6 (torx) and 12 point screws. Sizes: 8-32mm

Suitable for both metric and inch (SAE) standards 6 and 12 point screws with 8 to 32mm sizes.

Product code: G13546

Exhaust pipe expander

Sizes: 29-44mm (1 1/8"-1 3/4"), 38-62mm (1 1/2"- 2 7/16"), 54-87mm (2 1/8"-3 7/16")

Product code: MG50076

Petrol engine compression test kit, 0-20bar

Suitable for passenger cars and motorcycles, double scale gauge 0-20bar (0-290psi), adapters M10, M12, M14 (64, 94mm), M18

Product code: MG50184

Two jaw gear and bearing puller. Operating range: up to 100mm

Two jaw gear and bearing puller with adjustable clamping depth and width.

Product code: G02200

SAC clutch alignment tool set

SAC clutch alignment tool set, ensures quick removal and precise installation. 3- and 4-hole division

Product code: MG50442

Tube double flaring tool set, 10pcs

Tube double flaring tool set, 10pcs, tube sizes: 3/16", 1/4", 5/6", 3/8", 7/6", 1/2", 5/8"

Product code: G02721

Tube bending tool. For diameters: 6-10mm

Designed for bending copper tubes, aluminium tubes and stainless steel tubes.

Product code: G02723

Piston ring compressor, 3"x125

Piston ring compressor, 3"x125. Allows the assembly of pistons without damaging the piston rings.

Product code: G02620

Piston ring compressor 6", 60-175mm

6" piston ring compressor. Ø 60-175mm

Product code: JBM52697

Cam lock Renault 16V / 2.5 20V Volvo 1.6/1.8/1.9/2.0/2.2/2.3/2.4/2.5 (bar)

Product code: W0301

Camshaft Lock Volkswagen Audi 2.6, 2.8 V6 / V8

Product code: W0322

Flywheel lock for Peugeot and Citroen 1.8, 2.0, 2.2

Flywheel lock for Citroen: C4, C5, Xsara, Picasso, Evasion, Synergie, C8, Jumpy, Dispatch and Peugeot: 206, 307, 406, 607, 806, 807, Expert petrol engines.

Product code: W0323

Mercedes-Benz, BMW Visco cooling fan clutch tool set

Special tools for Mercedes Benz, BMW, Ford cooling fan clutches, water pumps

Product code: MG50702

BMW Common Rail injector puller set

Allows to remove the injector without disassembling the cylinder head. For BMW M47TU, M57, M57TU engines.

Product code: MG50630

Wheel Bearing tool VW

Bearing installation and removal tool for 85mm bearings. Application Volkswagen Touareg, Transporter, Multivan & T5

Product code: MG50432A

Ball joint separator tool set, replaceable heads, 20, 22, 24, 27, 30mm

Ball joint and tie rod separator tool set, capacity 20, 22, 24, 27, 30mm

Product code: MG50436

Crankshaft rear oil seal replacement tool for Iveco, Fiat 2.3

Crankshaft rear oil seal (gearbox side) replacement tool for Iveco, Fiat 2.3

Product code: W0438

Key to rotate the crankshaft Volkswagen 2.5 TDI, Touareg, Transporter T5

Product code: W0452

Puller sleeve rear beam Mercedes S Class W220 C215 (oe numbers 220 351 11 42 221 350 01 75)

Product code: W0453

Scriber

Curved/straight scriber

Product code: MG50252

Puller / Press sleeve metal - rubber arm rear longitudinal Honda Civic, CR-V, Concerto, CRX, Rover 200 (OE-sleeve 52385 SR3-000)

Product code: W0485

Oil pressure tester kit, hose with quick couplers, 10 adapters

For oil pump, pressure tester, oil pressure switch testing. Hose with quick couplers, with 10 adapters

Product code: MG50188

Cylinder leakage tester

Quickly determines piston, ring and valve faults. Measuring range 0-7bar (0-100psi), spark plug adapters 10, 12, 14mm

Product code: MG50185

Valve grinder, wooden

Valve grinder, wooden, with suction cups, sizes: 5/8", 13/16", 1 1/8", 1 3/8"

Product code: MG50104

Camshaft lock for Mercedes Benz M642, 3.0 24v V6

Timing lock for Mercedes Benz M642, 3.0, 24v, V6 diesel engines.

Product code: W0600

Timing box cover tools for Ford 1.8 TDCI, TDDI

Timing box cover tools for Ford Focus, C-Max, Tourneo Connect, Mondeo, Transit Connect 1.8 TDCI, TDDI.

Product code: W0635

Viscous clutch key for Mercedes Sprinter 3.0 V6 CDI

Viscous clutch key for Mercedes passenger cars with 3.0 V6 CDI and 4.0 V8 CDI engines.

Product code: W0641

Adapter for pulling the injectors 2.0 HDI Delphi (12mm) ( Delphi 28388960 )

Product code: W0663

Anti-freeze tester

Anti-freeze tester, Measuring range: -43ºC to 131ºC

Product code: JBM53453

Timing tool set, for BMW, N42, N46, N46T

Timing tool set for BMW, NN42, N46, N46T

Product code: JBM53259

Universal belt tensioner wrench set

Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm

Product code: JBM52832

Piston ring compressor 3", 53-175mm

3" piston ring compressor. Ø 53/175mm

Product code: JBM52696

Wheel bearing removal/installation tool set 55.7-88.4mm

Diminishes the possibility of wheel bearing damage during removal and installation. Sizes (d) 55.7, 63.3, 67.8, 70.7, 71.9, 71.7, 72.8, 73.4, 74.7, 77.4, 81.4, 83.3, 88.4mm.

Product code: JBM52551

Wishbone lever tool

Wishbone lever tool, Length: 1180mm, Tube: Ø 3.5cm, Brace distance: 50 - 45 - 40 - 35 - 30cm, Fastening support: 15 x 13cm

Product code: JBM51902

Adapter for testing fuel injection Diesel trucks

Adapter for testing fuel injection Diesel trucks - MAN 0826, 0824

Product code: W0144

Puller for plastic sleeves Skoda Octavia II / VW Touran / Golf V

Puller for plastic sleeves Skoda Octavia II / VW Touran / Golf V (sleeve oe no. 6Q0 407 183)

Product code: W0155

Camshaft locking tool Fiat 1.2 8V

Camshaft locking tool Fiat 1.2 8V

Product code: W0120

Beam puller for timing wheels

Beam puller for timing wheels

Product code: W0033

Press for silents and ball joints, for VW T4, Mercedes Sprinter, VW LT

Press for mounting and removing silents in the suspension arm in VW T4, VW LT and Mercedes Sprinter 1999-2006 without having to remove the arm from the vehicle.

Product code: W0027

Valve spring removal tool for 8V, 12V, 16V engines

Valve spring removal tool for 8V, 12V, 16V engines.

Product code: W0024

Injector puller set 1.5 DCI Delphi (14x1.5) Renault, Nissan

Injector puller set 1.5 DCI Delphi (14x1.5) Renault, Nissan

Product code: W0247

Axial joint puller 35-45mm

Capacity 35-45mm, length 400mm, hex end 27mm (1/2" drive)

Product code: MG50045

Transmission oil filling system (ATF) with 8 adaptors

Transmission oil filling system. Capacity: 7l, Outlet: 80cc cycle, Viscosity range up to SAE140. Includes 8 adaptors for wide range of cars.

Product code: MG04B1101

6pcs Trim pad removal tool kit

The door trim removes the patents simply and without damaging them. Can be applied to both metal and plastic fastening elements. The upholstery kit has three types of heads with two different lengths.

Product code: MG04C1024

A/C Compressor clutch remover kit

A special kit with elements that fit into a wide variety of A/C compressors. It is easy to remove and mount the Clutch Compressor Clutch Disc.

Product code: MG04D1003

Diesel compression tester kit, with injector, glow plug adapters

For passenger cars, light trucks, for diesel engines with direct injection and combustion chambers, measuring range: 0-70 bar, hose length: 355mm

Product code: MG50181

Oxygen sensor socket set

Sizes: 3/8" drive, 22mm, 6-point, 3/8" drive, 22mm, 6-point, dep, 1/2" drive 22mm, 12-point

Product code: MG50627

Puller injectors Fiat; Citroen; Iveco 3.0 HPI

Product code: W0558

Puller for plastic sleeves, Skoda Fabia, VW Polo

Puller for plastic sleeves, Skoda Fabia, VW Polo.

Product code: W0005

Sleeve puller, Golf IV, Audi A3, Skoda Octavia

Sleeve puller, Golf IV, Audi A3, Skoda Octavia

Product code: W0006

Face mill for crankshaft, VW TDI 1.9, 2.5

Face mill for the crankshafts of VW TDI 1.9, 2.5 engines.

Product code: W0017

Timing tool set, Alfa Romeo, Opel, Fiat, Saab 1.6, 1.9, 2.0, 2.4 JTD CDTI engines

Timing tool set, Alfa Romeo, Opel, Fiat, Saab 1.6, 1.9, 2.0, 2.4 JTD CDTI engines.

Product code: W0034

Wrench for alternator coupler, VALEO-Renault, Volvo (hardened)

Wrench for alternator coupler, VALEO-Renault, Volvo (hardened)

Product code: W0052

Inertial puller for car injectors, HDI

Inertial puller for car injectors, HDI

Product code: W0062

Puller for valve springs for 8V, 12V, 16V motors, with additional adapters

Puller for valve springs for 8V, 12V, 16V motors, with additional adapters

Product code: W0071

Tool for hub removal (set of 15 screws)

Tool for hub removal – cars of A, B, C class and others. Set of 15 screws.

Product code: W0072

Wrench for damper pin locking/unscrewing, Ducato, Jumper, Boxer

Wrench for damper pin locking/unscrewing, Ducato, Jumper, Boxer

Product code: W0090

Puller for rear beam sleeve, BMW E39 touring

Puller for rear beam sleeve, BMW E39 touring

Product code: W0113

Lock timing Audi 2.8 FSI / FSI 3.2 / 3.0 TFSI

Product code: W0481

Sleeve puller, Citroen C5

Sleeve puller, Citroen C5 (sleeve OE no. 352384)

Product code: W0196

Puller sleeve rear beam (large) for BMW X5 E53, M57 etc.

Puller sleeve rear beam (large) (OE no. 33 31 1 093 662, 33 31 6 770 454) for BMW X5 E53, M57 etc.

Product code: W0251

Camshaft lock for Mercedes 2.0, 2.1, 2.2 CDI

Camshaft lock for Mercedes 2.0, 2.1, 2.2 CDI

Product code: W0386

Wrench for the injection pump of diesel Mercedes Benz engines

Key for MRSF-ERE injection pumps found in Benz diesel engines.

Product code: W0324

Crankshaft locking tool for BMW N12, N14, N40, N42, N45, N46, N52

Crankshaft locking tool for BMW N12, N14, N40, N42, N45, N46, N52

Product code: W0390

Key clutch disc air conditioning Denso 23 mm (hardened)

Product code: W0448

Puller hub bearings Renault Trafic, Opel Vivaro 2.0 DCI

Product code: W0487

Timing lock set for BMW 2.0, 3.0D N47, N47S, N57 diesel (2007 - 2012)

Timing lock set for BMW 2.0, 3.0D N47, N47S, N57 diesel (2007 - 2012).

Product code: W0491

Bearing and silent puller for BMW rear axles

Extractor for the removal and installation of the ball joint bearing on the wheel support of the rear axle on BMW 1, 2, 3, 4, X1, X3, X4, i8 series.

Product code: W0627

Bush, bearing and seal driver set 52pcs

Bush, bearing and seal driver set 52pcs. Discs: 18 - 65mm and 74mm

Product code: CKBB1035

Timing lock for BMW 1.8 and 2.0, N42, N46, N46T Valvetronic petrol engines

Timing lock for BMW 1.8 and 2.0, N42, N46, N46T Valvetronic petrol engines.

Product code: C01/0012

Adapter sleeve (diameter 57mm) for belt pulley wrench for BMW diesel engines

Adapter sleeve (diameter 57mm) for belt pulley wrench for BMW diesel engines.

Product code: C01/0134

Timing lock for Ford Transit TDCI EcoBlue 2016-

Tool for dismantling the injection pump assembly in Ford 2.0 D EcoBlue TDCi (2016 and onward) engines. Using the tool, no adjustment required on the pump after reassembly.

Product code: C01/0195

Timing lock for BMW N63, N74 and S63 4.4l V8 engines

For setting the timing when changing the timing chain, repairing the cylinder head, replacing the cylinder head gasket, etc.

Product code: C01/0227

Hand held vacuum pump

Accepts many kinds of adapters to fit most types of vehicles. The body has a switch to control two kinds of pressure conditions. Pressure ranges: positive pressure 0-60psi (1-4inhg) and negative pressure 0-30psi (0 to -1inhg).

Product code: CHS-A998A

Internal bearing puller set

Internal bearing puller 10-32 mm. A professional set, necessary in every workshop.

Product code: CKB04004

Drum brake pliers

Drum brake pliers. For removing and installing return springs on drum brakes.

Product code: JBM52625

Transmission oil filling system (ATF)

Transmission oil filling system. Capacity: 7.5l, Outlet: 80cc cycle, Viscosity range up to SAE140. Includes 15 accessories for Ford 1/8 - 27, universal BMW, Honda, Nissan, VW, Audi, Skoda, Porsche, Mini Cooper, Mercedes, Hyundai. Universal and flexible 300mm hose.

Product code: JBM52797

Transmission fluid and engine oil level gauge (dipstick) set, Mercedes Benz/Audi

5pcs transmission fluid and engine oil level gauge (dipstick) set for vehicles Mercedes Benz and Audi. Length: 920 - 930 - 1160 - 1200mm.

Product code: JBM53206

Universal cooling system pressure test kit, 5pcs

This tool has been designed to check for leaks in the car cooling system. The four universal cone adapters fit a wide range of vehicles and cap sizes. (17-24mm, 28-31.5mm, 37-39.5mm, 47-48.5mm)

Product code: JBM54139

Non-marring hook, pick and prying tool set, 6pcs

This set allows you to remove, clean, and work on trim clips, oil seals, grommets, O-rings, air vent assemblies, tight gaps in interior automotive compartments, delicate wiring, composite electrical connectors, and other sensitive finished components.

Product code: JBM54142

Adapter to remove the pins down on the Renault Master 2006

Adapter to remove the pins down on the Renault Master 2006

Product code: W0160

VW Crankshaft sealing flange removing and installing tool (diesel)

Specially designed tool to renew crankshaft sealing flange.

Product code: MG04A1028

Axial joint puller 28-35mm

Capacity 28-35mm, length 400mm, hex end 27mm (1/2" drive)

Product code: MG50045A

Universal puller set

Universal puller set, jaw length 100, 200, 250mm

Product code: MG50131

Air conditioner line tool set

Air conditioner line tool set, sizes 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"

Product code: MG50129

Cooling system pressure tester

For coolant leakage testing, cleaning, pressure testing (measuring range 0-2.5 bar), 17 caps, radiator cap adapter. Suitable for coolant change and refilling.

Product code: MG50508

Puller assembly and disassembly sleeve rear beam AUDI A4, A4 Avant 94-01

Product code: W0479

Universal sliding hammer hub puller, with 15 screws

Universal sliding hammer hub puller, with 15 screws

Product code: W0002

Slide hammer, diameter 70mm, weight 0.9kg, length 300mm

Slide hammer, diameter 70mm, weight 0.9kg, length 300mm

Product code: W0060

Puller for belt pulleys, four-arm

Puller for belt pulleys, four-arm

Product code: W0073

Inertial puller for car injectors + attachment, CDI and others

Inertial puller for car injectors + attachment, CDI and others

Product code: W0088

Timing tool set BMW M42, M44 M50, M52, M52TU, M54, M56, S50US & S52US

Timing tool set BMW M42, M44 M50, M52, M52TU, M54, M56, S50US & S52US

Product code: W0159

Timing tool set BMW 2.0d N47 / N47S common rail, diesel

Timing tool set BMW 2.0d N47 / N47S common rail, diesel

Product code: W0180

Injection pump wrench set for Bosch, Lucas etc., 6 pcs special keys

Injection pump wrench set for Bosch, Lucas etc., 6 pcs special keys

Product code: W0235

Lock (adapter; pin) timing Renault 2.0 DCi

Product code: W0344

3 bolts, adapter for locking the volkswagen audi 2.0 – 4.2

Product code: W0492

Camshaft Lock Opel 1.0 / 1.4 SIDI, EcoFlex Turbo Petrol

Product code: W0527

Adapter for loosening stuck M14x1 injectors

Adapter for loosening stuck M14x1 injectors

Product code: W0536

Timing tool set for BMW 1.8 and 2.0 N42, N46, N46T petrol engines

Timing tool set for disassembly and assembly of the intake camshaft of BMW 1.8 and 2.0 N42, N46, N46T Valvetronic petrol engines.

Product code: C01/0030

Shaft locking pin for VW TSI, FSI, TFSI engines

Shaft locking pin for VW TSI, FSI, TFSI engines

Product code: C01/0090

Crankshaft holding tool for BMW N47 and N57 2.0, 3.0 engines with chain

Crankshaft holding tool for BMW N47 and N57 diesel engines. Essential for securing the crankshaft when replacing the timing chain.

Product code: C01/0232

Car stethoscope

The car stethoscope is used for auscultation diagnosis. Eliminates sounds from other points than auscultated. 

Product code: CHS-A1022