Adapters for removing and installing the rocker pin Mercedes W124

Hot stapler plastic repair set

Hot stapler plastic repair set. Easy-to-use tool for quick and efficient repairing.

Product code: 804064

Puller to the hub / bearings VW T5

Puller to the hub / bearings VW T5

Product code: W0129

Puller for wheel hub / bearing Ford Focus II, C-Max, Volvo, Mazda 3,-puller with ABS and without ABS

Product code: W0305

Lock Flywheel Renault 1.2 / 1.6 Petrol, 1.9 D / TD

Product code: W0327

Flywheel locking tool set Ford Mazda Volvo

Flywheel locking tool set Ford Mazda Volvo petrol engines (1991-2010), 1.4 / 1.6 / 1.7 / 1.8 / 2.0 16V

Product code: W0148

Lock pulley shaft Volvo (T4, T5) 1.6, 2.0 GDTI

Product code: W0486

Timing tool set Opel 2.2 16v chain engine

Timing tool set Opel 2.2 16v chain engine

Product code: W0154

Press, puller for bolts, 20 adapters Master, Movano, Iveco, Vw Lt etc.

Press, puller for bolts, 20 adapters Master, Movano, Iveco, Vw Lt, Ctrafter, Sprinter

Product code: W0162

Central bolt puller upper arm VW, Audi after 2005

Central bolt puller upper arm VW, Audi after 2005

Product code: W0164

Sleeve puller, rear beams BMW E39 (sleeve oe no. 3317 1090 389)

Sleeve puller, rear beams BMW E39 (sleeve oe no. 3317 1090 389)

Product code: W0165

Sleeve puller, Golf IV, Audi A3, Skoda Octavia for the sleeve FEBI

Sleeve puller, Golf IV, Audi A3, Skoda Octavia for the sleeve FEBI

Product code: W0172

Timing tool set Honda, petrol and diesel 1.6, 1.8, 2.0, 2.3, 3.0 engines

Timing tool set Honda, petrol and diesel 1.6, 1.8, 2.0, 2.3, 3.0 engines

Product code: W0174

Wheel bolt for injection pump lock Volkswagen, Audi, Seat, Skoda

Wheel bolt for injection pump lock Volkswagen, Audi, Seat, Skoda

Product code: W0176

Timing tool set Volvo V 50 16 V 1.8 / 2.0 with chain - petrol

Timing tool set Volvo V 50 16 V 1.8 / 2.0 with chain - petrol

Product code: W0177

Timing tool set, Ford, Mazda, Diesel 1.8 TDCi, TCI

Timing tool set, Ford, Mazda, Diesel 1.8 TDCi, TCI

Product code: W0178

Camshaft sprocket puller Ford, Mazda 1.8 / 2.5 TDCI, TCI, TDDI

Camshaft sprocket puller Ford, Mazda 1.8 / 2.5 TDCI, TCI, TDDI

Product code: W0182

Camber angle setting tool

Camber angle setting tool

Product code: W0183

Adapter for injection units pulling, Fiat Ducato 2.3 JTD 15.5 mm

Adapter for injection units pulling, Fiat Ducato 2.3 JTD 15.5 mm

Product code: W0184

Timing tool set for Ford, Mazda, Volvo chain driven gasoline engines

Timing tool set Ford, Mazda 16V Zetec and Volvo V50 16V 1.8, 2.0 chain driven gasoline engines.

Product code: W0185

Timing tool set VW, Audi, Skoda, Seat, 2.0, 1.2, 1.4, 1.6, 1.9 TDI

Timing tool set for VW, Audi, Skoda, Seat, 2.0, 1.2, 1.4, 1.6, 1.9 TDI engines.

Product code: W0187

Timing tool set BMW / Rover Diesel Common Rail System

Timing tool set BMW / Rover Diesel Common Rail System

Product code: W0188

Timing tool set VW / Audi 2.4 / 3.2 TDI / 4.2 TDI - petrol

Timing tool set VW / Audi 2.4 / 3.2 TDI / 4.2 TDI - petrol

Product code: W0198

Tensioning key Fiat / Alfa Romeo / Lancia (male)

Tensioning key Fiat / Alfa Romeo / Lancia (male)

Product code: W0201

Puller sleeve the arm forward (lower) L / R BMW X5 (E70) X6 (E71, E72), 3.0-4.8 (oe sleeve 31106778015)

Product code: W0501

Tensioning key Alfa Romeo / Lancia (female)

Tensioning key Alfa Romeo / Lancia (female)

Product code: W0202

Timing tool set Fiat Ducato 2.2 JTD

Timing tool set Fiat Ducato 2.2 JTD

Product code: W0204

Injector removal set for Mercedes A Class CDI

Injector removal set for Mercedes A Class CDI

Product code: W0206

Crankshaft locking tool set VW, Audi TDI Diesel 3, 4, 5, 6 cylinders

Crankshaft locking tool set VW, Audi TDI Diesel 3, 4, 5, 6 cylinders

Product code: W0207

Cam lock Renault 16V / 2.5 20V Volvo 1.6/1.8/1.9/2.0/2.2/2.3/2.4/2.5 (bar)

Product code: W0301

Timing belt tensioner key Audi / VW

Timing belt tensioner key Audi / VW

Product code: W0210

Timing belt tensioner key, Chrysler Voyager, Jeep Cherokee 2.5, 2.8 CRD

Timing belt tensioner key, Chrysler Voyager, Jeep Cherokee 2.5, 2.8 CRD diesel engines

Product code: W0219

Viscous clutch wrench Mercedes Sprinter 3.0 V6 CDI

Viscous clutch wrench Mercedes Sprinter 3.0 V6 CDI

Product code: W0228

Injection pump gear removal BMW, Opel, Land Rover

Injection pump gear removal BMW, Opel, Land Rover

Product code: W0229

Puller / press sleeve "candy" longitudinal link back FORD Focus

Puller / Press sleeve "candy" longitudinal link back FORD Focus (Oe: 1061670 or 98AG-5K896-AB)

Product code: W0230

Timing belt tensioner key, Lancia, Fiat 1.1, 1.2, 1.4

Timing belt tensioner key, Lancia, Fiat 1.1, 1.2, 1.4

Product code: W0237

Broken glow plug reamer ⌀9mm

Broken glow plug reamer ⌀9mm

Product code: W0633

Timing tool set, Opel 1.6D, 1.7D, TD, DTI, DTL - Diesel

Timing tool set, Opel Kadett, Astra, Vectra 1.6D, 1.7D, TD, DTI, DTL - Diesel

Product code: W0244

Dial strip Opel Kadett, Astra, Vectra, 1.6 / 1.7 - Diesel

Dial strip Opel Kadett, Astra, Vectra, 1.6 / 1.7 - Diesel

Product code: W0245

Injector puller set 1.5 DCI Delphi (14x1.5) Renault, Nissan

Injector puller set 1.5 DCI Delphi (14x1.5) Renault, Nissan

Product code: W0247

Shaft puller for manual gearbox, Fiat Ducato 2.8 JTD

Shaft puller for manual gearbox, Fiat Ducato 2.8 JTD

Product code: W0253

Timing tool set Citroen / Peugeot 2.0 16V with variable phase timing

Timing tool set Citroen / Peugeot 2.0 16V with variable phase timing

Product code: W0255

Press the front control arm bolts Renault Scenic II; Grand Scenic II; Megane II; Dacia Logan

Product code: W0352

The key to the water pump timing belt tensioning - Opel / Daewoo / Chevrolet 41 mm

The key to the water pump timing belt tensioning - Opel / Daewoo / Chevrolet 41 mm

Product code: W0257

The key to the water pump timing belt tensioning- Opel / Daewoo / Chevrolet 46mm

The key to the water pump timing belt tensioning- Opel / Daewoo / Chevrolet 46mm

Product code: W0258

Timing tool set, Volkswagen, Audi, Seat 1.9 SDI / TDI

Timing tool set, Volkswagen, Audi, Seat 1.9 SDI / TDI

Product code: W0259

Adapters for mounting and dismounting the front control arm bolts Renault Scenic II; Grand Scenic II; Megane II; Dacia Logan

Product code: W0353

Timing tool set Ford 1.8 SCI, Mazda 2.0 / 2.3 turbo timing chain

Timing tool set Ford 1.8 SCI, Mazda 2.0 / 2.3 turbo timing chain

Product code: W0262

Timing tool set Mini One, Cooper 1.6, Cooper 1.6s, petrol, chain

Timing tool set Mini One, Cooper 1.6, Cooper 1.6s, petrol, chain

Product code: W0264

Timing tool set Opel Vectra C 2.8 V6 timing chain, petrol

Timing tool set Opel Vectra C 2.8 V6 timing chain, petrol

Product code: W0266

Timing tool set Audi 3.6 / 4.2 V8

Timing tool set Audi 3.6 / 4.2 V8

Product code: W0268

Timing tool set Audi VW Skoda Seat 2.4, 2.7, 2.8, 3.0 V6 30V

Timing tool set Audi VW Skoda Seat 2.4, 2.7, 2.8, 3.0 V6 30V

Product code: W0269

Timing tool set Lancia Kappa 5 cyl. 2.0 20v (Silver)

Timing tool set Lancia Kappa 5 cyl. 2.0 20v (Silver)

Product code: W0271

Key fuel filter Mercedes CDI - 47 teeth

Product code: W0357

Cam lock Citroen / Peugeot 1.4 16V "ET"

Product code: W0358

Key crankshaft Citroen / Peugeot, petrol 1.8/2.0/2.2 16V HPI "EW" belt

Key crankshaft Citroen / Peugeot, petrol 1.8/2.0/2.2 16V HPI "EW" belt

Product code: W0273

Puller injection pump sprocket Renault 1.9 D / TD / Volvo / Opel

Puller injection pump sprocket Renault 1.9 D / TD / Volvo / Opel

Product code: W0274

The key to lock the crankshaft Volkswagen Audi Skoda 1.4-1.6 16V petrol

The key to lock the crankshaft Volkswagen Audi Skoda 1.4-1.6 16V petrol

Product code: W0275

Tool for setting the oil pump Ducato, Iveco, Citroen Jumper - 2.3 Diesel CR

Product code: W0278

Fuel filter wrench Fiat, Opel - 1.3, 1.9, Iveco 2.2, 2.3, 3.0

Product code: W0279

Bushing injection pump BMW Common-Rail 2.0d N47 / N47S (06-10)

Product code: W0282

Internal bearing puller ⌀35mm

Two-arm puller for gearbox bearings with internal diameter 35mm

Product code: W0291

Puller for wheel hub / bearing rear swingarm Mercedes Vito Viano 2.2 CDI after 2003

Product code: W0361

Camshaft lock for Land Rover / Jaguar Diesel 2.0 Tdi, 2.5 Tds, 2.7 TDV6

Camshaft lock for Land Rover / Jaguar Diesel 2.0 Tdi, 2.5 Tds, 2.7 TDV6

Product code: W0302

Cam lock VW, Seat, Skoda and Audi 1.2 TSI, TFSI engines

Cam lock tool for VW, Skoda, Seat, Audi 1.2 TSI chain driven petrol engines.

Product code: W0292

Cam lock Fiat, Alfa Romeo, Lancia 1.4 MultiAir

Product code: W0295

Flywheel engines FORD diesel and petrol

Product code: W0298

Lock Camshaft Opel 1.6 / 1.7 Diesel

Product code: W0363

The key to lock the crankshaft VW / Audi / Seat / Skoda 1.8 TDI TFSI

Product code: W0303

The key to the timing belt tensioner VW, Audi bent

Product code: W0304

Key injector Volkswagen 24 angle

Product code: W0365

Lock injection pump Mercedes Benz Diesel OM 601, OM 602, OM 603

Product code: W0367

Adapter for pulling Denso injectors for Toyota 2.2 170hp engines

Adapter for pulling Denso injectors for Toyota 2.2 170hp engines

Product code: W0320

Camshaft Lock Volkswagen Audi 2.6, 2.8 V6 / V8

Product code: W0322

Lock flywheel Peugeot Citroen 1.8, 2.0, 2.2

Product code: W0323

Camshaft lock for Fiat Panda 1.1 Eco and 1.2 engines

Camshaft and crankshaft locking kit for changing the timing belt. Allows you to set the timing in the correct position. Includes camshaft alignment bracket and crankshaft lock.

Product code: W0325

Timing lock for Ford 1.25, 1.4, 1.6 16V engines

Timing lock for Ford 1.25, 1.4, 1.6 16V engines.

Product code: W0332

A key for locking the pulley shaft Ford / Volvo 1.4, 1.6, 1.8, 2.0, 2.3 16v Duratec

Product code: W0566

Puller sleeves left front beam Ford Focus II; III; C-Max; Volvo (no oe sleeves 1695011, 1355621, 1695011,23032, 30666042, FM-FOC

Product code: W0369

Camshaft lock (locking plates) for Renault, Nissan, Opel 2.2, 2.5 dCi

A timing setting tool (setting plates) for Renault, Opel, Nissan 1.5, 1.9, 2.2, 2.5 dCI engines.

Product code: W0335

Cam lock VW 2.5 TDI PD (Transporter T5, Touareg)

Product code: W0339

Cam lock VW 2.5 / 4.9 D / TDI PD - 5-cyl and 10-cyl

Product code: W0340

Lock (pin; adapter) timing Renault / Opel / Nissan 1.9 DCI

Product code: W0342

Lock timing Ford 1.8, Mazda 2.0 / 2.3 turbo

Product code: W0373

Denso injector valve socket

Denso injector valve socket

Product code: W0391

Adapter to pull the injectors HDI Siemens M25 x 1 (hardened)

Product code: W0393

Puller Injector HDI Siemens M25 x 1 (hardened)

Product code: W0394

Press the down crossover pins Jeep Cherokee, Grand Cherokee, Wrangler

Product code: W0399

Lock camshaft Opel Corsa D 1.0

Product code: W0402

Key clutch viscotic Volkswagen Crafter 2.5 TDI

Product code: W0404

Blockade camshaft Ford / Volvo 1.6 EcoBoost

Product code: W0405

Key locking the crankshaft Ford Mondeo, Transit 2.0 2.2 2.4 3.2 Duratorq TDCi (01-)

Product code: W0407

Lock the timing VW Transporter 2.4D (95-03), Volkswagen Crafter 2.5 TDi (06-09)

Product code: W0408

Key to lock the crankshaft pulley Volkswagen LT; transporter

Product code: W0410

Key to timing belt tensioner VW, Audi, Seat, Skoda 1.2 / 1.4 TSI / TFSI (2013) (T10499)

Product code: W0419

Puller sleeve rear beam AUDI A4, A4 Avant 94-01 (only for pressing)

Product code: W0421

Injection pump removal tool for BMW N47, N47S Common Rail engines

Pinion extractor for diesel injection pumps in BMW N47, N47S and N57 1.8d, 2.0d, 2.5d, 3.0d engines manufactured in 2007 - 2015. This extractor is compatible with new generation BMW engines that have the distribution in the back (at the flywheel).

Product code: W0423

Wheel Puller magnetic (Magneto) Suzuki M50x1,5

Product code: W0429

Puller for hub booster pumps

Product code: W0430

Key clutch disc air conditioning Denso 22 mm (hardened)

Product code: W0447

Lock timing Land Rover 2.5D / Td5 on a chain

Product code: W0466

Timing lock for Opel, Fiat, Alfa Romeo, Chevrolet 1.4, 1.6, 1.8 16V engines

Tool set for GM 16-valve engines found in Opel, Chevrolet, Fiat and Alfa Romeo models from 2003 to 2014.

Product code: W0497

Puller hub / bearing Fiat Ducato Citroen Jumper

Product code: W0499

Timing lock for Opel 1.6 CDTI and EcoFlex CDTI engines (2013 and onwards)

A comprehensive kit to lock the 1.6L diesel engine into its timed position for the removal and replacement of the timing chain.

Product code: W0528

Camshaft Lock Opel 2.0 / 2.4 Ecotec with timing chain

Product code: W0529

Adapter for loosening stuck M12x1 injectors

Adapter for loosening stuck M12x1 injectors

Product code: W0531

Camshaft Lock BMW M62 Vanos

Product code: W0543

Device for mounting and dismounting the clutch Audi and VW – DSG

Product code: W0537

Cap rear hub Ford Transit after 2014

Product code: W0574

Lock the timing of VW, Audi, Seat, Skoda - 2.0 FSI / TFSI – petrol

Product code: W0554

Puller injectors Fiat; Citroen; Iveco 2.2 TDCI, HDI, JTD

Product code: W0556

Lock timing KIA, Hyundai

Product code: W0557

Tool for setting the magnetic ring Citroen, Peugeot, Jaguar, Land Rover 2.7 ans 3.0 TD V6 HDI

Tool for setting the magnetic rings in Citroen , Peugeot , Jaguar , Land Rover 2.7 and 3.0 TD V6 HDI engines.

Product code: W0576

High pressure pump sprocket lock for VW, Audi 3.6 V6 engines

High pressure pump sprocket locking tool for VW, Audi 3.6 V6 4V engines (OEM T10332)

Product code: W0580

Key to the oil plug Volkswagen, Audi, Seat, Skoda TSI; TFSI

Product code: W0581

Timing Lock Jaguar, Land Rover, Range Rover 2.7 TDV6 Diesel

Product code: W0582

Locking of the flywheel and the pulley shaft Renault Nissan 1.4, 1.6; 2.0; 2.3

Product code: W0584

Puller injection pump Vw Seat skoda 1.6 / 2.0 TDI CR

Product code: W0586

Delphi piezoelectric injector puller for Mercedes, Kia, Hyundai

Delphi piezoelectric injector puller for Mercedes, Kia, Hyundai

Product code: W0589

Timing lock for BMW E30, E36, E46, E34, E39, E38 engines

Timing lock for BMW M42, M44, M50, M52, M54, M56, M52TU, S50US, S52US.

Product code: W0595

The key to the timing belt tensioner VW, Audi, Skoda 1.4 TSI / TFSI 16mm

Product code: W0597

Camshaft Mercedes-Benz M642, 3.0 24v V6

Product code: W0600

Injection pump removal tool for Renault, Opel, Nissan 2.2, 2.5 DTI, CDTi

A tool to remove the diesel pump sprocket to allow the removal of the fuel pump without disturbing the timing belt on Renault 2.5 and 2.2 diesel engines found in Renault, Opel and Nissan vans.

Product code: W0602

The variator's key VW, Audi, Seat, Skoda 1,4; 1.6 TSI

Product code: W0603

The keys for locking the pulley shaft Mercedes M112, M113, M271, M272, M273, M642

Product code: W0604

Timing lock Jaguar, Land Rover 4.0, 4.2, 4.4 petrol by 2010

Product code: W0609

Broken glow plug reamer ⌀11mm

Broken glow plug reamer ⌀11mm

Product code: W0634

Tool for timing cover seal Ford 1.8 TDCI, TDDI

Product code: W0635

viscous key Mercedes Sprinter 3.0 V6 CDI - Reinforced, stronger

Product code: W0641

Puller sleeve rear trailing arm KIA Creed I, II, Hyundai I 30 (oe sleeve 55543-2H000)

Product code: W0643

Camshaft lock for Opel 1.4 without Turbo

Product code: W0654

Camshaft locking tool for Mercedes M271, C200, C180, E260

Use this tool to accurately position and align the TDC to fix the camshaft in the timed position (direct center), so that the cam phaser can be effectively removed while tightening and loosening the phaser bolt. (Note that the camshaft must be aligned when removing and installing the timing chain)

Product code: W0662

Adapter for pulling the injectors 2.0 HDI Delphi (12mm) ( Delphi 28388960 )

Product code: W0663

Puller gear injection pump Peugeot Citroen Toyota 1.6 HDI

Product code: W0697

Fan clutch remover for BMW

BMW fan viscous clutch remover. Double-sided holding tool with a spacing of 38mm and 44.5mm.

Product code: W0676

Variator key VW, Audi 3.0 L

Product code: W0674

Key variator VW, Audi 4.2, 2.5, 5.0

Product code: W0675

Crankshaft lock Fiat Opel 1.9 D; 1.9 TD; 1.9 JTD; 2.4 JTD

Product code: W0691

Tool to adjust the variable cam timing Vanos BMW M60, M62 V8 Land Rover

Product code: W0678

Face milling cutter for the shaft Fiat min 1.4 16V

Product code: W0699

Timing lock Ford 1.6 Ecoboost SCTi / Ti-VCT Ecoboost

Product code: W0703

Wrench for unscrewing the nut of the injector unit body Vw, Audi 2.0 - Siemens (30mm)

Product code: W0709

The key to block the Ford A / C compressor pulley

Product code: W0711

The key to blocking the Ford Transit air conditioning pulley

Product code: W0713

Battery tester, Telwin

Tester used to verify the charge status of the 6/12V batteries. Easy to use and allows operations without disconnecting the battery from the vehicle.

Product code: 802517

Rear Suspension Bush Puller Ford Mondeo

Rear Suspension Bush Puller Ford Mondeo

Product code: W0020

Puller sleeve front beam Renault Laguna II / Trafic II (oe sleeves 8200000512)

Product code: W0368

Puller sleeve rear beam Opel Zafira B; Astra H, Meriva B (oe sleeve OPEL 4 02 952; 54 02 637)

Product code: W0372

Pin to the crankshaft Ford Fiesta 1.25, 1.4, 1.6 Zetec, Duratec

Product code: W0406

Puller sleeve rear beam, RENAULT LAGUNA III , Renault Laguna Coupe

Product code: W0503

Timing chain and camshaft locking tool set for Mercedes engines

This timing chain and camshaft locking tool set is to be used on M271, DE18ML, E16ML, DE18LA, 4 cylinder, 2003-2005 Mercedes engines.

Product code: MG04A2121

Suspension bush puller, Opel Vectra B, BMW E36

Ideal for removal and refitting of the suspension bushes without removing the trailing arm assembly from the vehicle

Product code: W0001

Pilot bearing puller. For bearing with inner diameters: 12-38mm

Suitable for removing tight fitted sleeve type bearings and bushings with inner ring diameters of 12 to 38mm.

Product code: G30300

Multifunctional socket wrench 48in1. Socket diameters: 8-19mm

It can replace wrenches intended for 12-point, 6-point, 4-point, E-Torx and spline screws and nuts.

Product code: G15030

14pcs E4-E24 Torx socket set

14pcs E4-E24 Torx socket set. Use with 1/2", 3/8", 1/4" drives.

Product code: G13566

Car mini bladed fuse set, 140pcs

Car mini bladed fuse set, 140pcs

Product code: G02825

Brake caliper sockets for Audi Q5, A4, A5

Designed to loosen or tighten brake caliper bolts in Audi vehicles.

Product code: W0552

Alternator key with 6 point 17mm outter drive. Length 30mm

Bosch alternator clutch wrench. A specialist wrench for assembly and disassembly of the pulley clutch of Bosch alternators.

Product code: G02782

Tube flaring tool set with pipe cutter

Tube flaring tool set with pipe cutter. For tube sizes: 5, 6, 8, 10, 12, 14, 18mm.

Product code: G02722

Oil drain pan 10L

A container ideal for the recovery of oil and antifreeze liquids.

Product code: G02634

Ball joint seperator for pin diameters up to 19mm

Professional ball joint pin puller. It is made of durable, high-quality tool steel. It is adapted to work with pins with a diameter of not more than 19mm.

Product code: G02587

Oil filter strap wrench 85-95mm

Band wrench for replacing oil filters in cars and vans. Designed for filters with a diameter of 85 to 95mm.

Product code: G02562

Universal three arms oil filter wrench 3/8" (65-130mm)

Oil filter wrench with 3 arms can be adjusted from 65 - 130mm in diameter. Comes with an adapter so it fits any 3/8" and 1/2" square drive ratchets or extensions.

Product code: G02550

Vacuum gauge and fuel pump pressure tester set with adapters

Measures vacuum up to 70cmHg and pressure up to 0.7bar. Fittings included for compatibility with most cars.

Product code: G02508

Puller sleeve rear beam Renault Megane II; Scenic II; Grand Scenic II (oe sleeve 7701479190)

Product code: W0379

Fuel feed pipe pliers

Suitable for the removal of connectors on in-line fuel filter.

Product code: G01659

Stud Wrench 8" 12-21mm

Fully adjustable with a one-handed squeeze. Efficient ratcheting by releasing, then re-gripping the object. Often removes nuts and bolts damaged by other tools.

Product code: G00860

Fish tape, 30m, red

30m steel cable fish tape in plastic red case. Flat metal tape, size 3x1mm. Insertion head size 40x10x3mm.

Product code: FT100-RED

Engine timing tool kit for BMW S54 engines

Specifically designed for the popular BMW M3 fitted with the chain driven 3.2 litre 6 cylinder 24-valve petrol engines. Engine code S54 (32 6S 4)

Product code: CKB01062

Hex key for Bosch injector valve

H10 hex wrench with a 7.5mm hole for disassembly of Bosch injector valves.

Product code: C04/0087

Renault and Peugeot rear axle bush remover and installer

Designed for the removal, installation and alignment of rear axle bushes on Renault Laguna II and Peugeot 207.

Product code: C02/0094

Engine timing kit for Hyundai, Kia 1.6 Diesel engines

Engine timing kit for Hyundai, Kia 1.6 CRDi, D4FE, D4FE (U3) Diesel engines.

Product code: C01/0231

Timing lock set for Ford 1.0 EcoBoost (Fox) LT

Ford timing lock for 1.0 Eco Boost (Fox) LT engines from 2018.

Product code: C01/0229

Camshaft lock for BMW M52 M54 M56 M52TU engines

Camshaft lock for BMW M52 M54 M56 M52TU engines.

Product code: C01/0033

Timing lock set for Citroen, Peugeot, Fiat, Iveco, Renault, Opel

Timing lock set for Citroen, Peugeot, Fiat, Iveco, Renault, Opel 2.5, 2.8 diesel engines.

Product code: C01/0015

Timing locks for Ford, Mazda, Volvo 1.4, 1.6, 2.0 16V

Timing locks for Ford, Mazda, Volvo 1.4, 1.6, 2.0 16V.

Product code: C01/0014

Timing locks for Ford, Mazda 1.8 / 2.5 D, TD, DI, TDCI, TCI

Timing locks for Ford, Mazda 1.8 / 2.5 D, TD, DI, TDCI, TCI.

Product code: C01/0008

Timing lock set for Ford, Mazda, Volvo 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V

Timing lock set for Ford, Mazda, Volvo 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V. Locking pin for the shaft and two camshafts and pins for blocking the crankshaft.

Product code: C01/0002

Camshaft locking bar for Ford 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V engines

Camshaft locking bar for Ford 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V engines

Product code: C01/0001

Adapters to bolts down Jeep - Cherokee, Grand Cherokee, Wrangler

Product code: W0398

Puller bushings rear beam Renault Laguna II (to no of original sleeves with flat his back)

Product code: W0329

Key - Lock crankshaft pulley Honda

Product code: W0308

Puller for replacement hydraulic tappets - Opel 8V

Product code: W0307

Puller for wheel hub / bearing VW Polo, Seat, Skoda, Audi A2-puller with ABS and without ABS

Product code: W0306

Timing Lock Ford, Peugeot, Volvo - 2.0, 2.2 D

Product code: W0300

Camshaft lock for BMW engines M52, M54, M56

Camshaft lock for BMW Vanos engines M52, M54, M56. Tools for setting variators, cylinders, chain, main chain tension and the chain tensioner lock. 

Product code: C01/0010

Timing lock for BMW and Mini B37, B47, B57 1.5, 2.0, 3.0 diesel engines with chains

Timing lock for BMW and Mini B37, B47, B57 1.5, 2.0, 3.0 diesel engines with chains.

Product code: C01/0223

Bushing and silent press for Mercedes, VW, Renault, Opel, Nissan

The tool is used for pressing in and out the pins and silents without the disassembly of the control arm, thus saving you time and energy.

Product code: C02/0140

Ball joint removal tool set

Designed for easy removal of most popular types of pitman arms, tie rods and ball joints. Operation range: 17, 19, 21, 23, 27mm

Product code: CKB04340

Fish tape, 30m, green

30m steel cable fish tape in plastic green case. Flat metal tape, size 3x1mm. Insertion head size 40x10x3mm.

Product code: FT100-GREEN

Hydraulic jaw puller kit 5t

Multi-function puller with adjustable two or three leg function. Allows bearings, gears, etc. to be easily removed with minimal effort by use of the hydraulic puller.

Product code: G00910

Hydraulic jaw puller set 10t

Multi-function puller with adjustable two or three leg function. Allows bearings, gears, etc. to be easily removed with minimal effort by use of the hydraulic puller.

Product code: G00911

CV joint clamp banding tool

CV joint clamp banding tool is suitable for installation and tightening of band-style clamps on CV joint boots, power steering rack and pinion steering gear boots.

Product code: G01653

CV boot clamp pliers (ear type)

CV boot clamp pliers suitable for Oetiker CV drive shaft boot securing clips. Plier's plate presses a flat on the top of the clip so that it forms the spring loop correctly.

Product code: G01656

Oil funnel with built in filter

Oil funnel with built in filter and flexible hose. Dia.: 140mm

Product code: G02150

Brake piston presser. Max 70mm jaw spread.

Essential tool for pressing in the brake piston to allow insertion of new brake pads.

Product code: G02534

Oil filter strap wrench 60-105mm

Band wrench for dismounting all types of oil filters with a diameter of 60 to 105mm.

Product code: G02564

Lever style valve spring extractor. For 8, 16, 24V engines

Lever press designed to disassemble and remove valve springs in 8V/12V/16V/24V OHV, OHC and CVH engines. Adapters: 24, 30, 35mm

Product code: G02573

Hook and pick set 6pcs (Lenght: 240mm)

Hook and pick set for removing seals, O-rings and gaskets.

Product code: G02706

Hook and pick set, 9pcs

Hook and pick set for removing oil seals, o-rings and gaskets

Product code: G02708

Tube flaring set 3-19mm

Tube flaring set for tubes with diameters: 3, 5, 6, 8, 10, 12, 15, 16, 18, 19mm.

Product code: G02720

5pcs strut nut tool set for Audi, VW and Mercedes

A set of nut tools for tightening and loosening shock absorber mounts.

Product code: G02785

Car non-insulated terminal connector set, 750pcs

Car non-insulated terminal connector set, 750pcs

Product code: G02828

Universal socket adapter 7 to 19mm diameters

The universal socket is designed to automatically adjust to fit any nut or bolt with 7 to 19mm (1/4" to 3/4") diameters.

Product code: G15020

Universal socket adapter 7 to 19mm diameters

Universal socket adapter. For nuts and bolts with 7 to 19mm diameters.

Product code: G15021

Pilot bearing puller. For bearing with inner diameters: 12-38mm

Suitable for removing tight fitted sleeve type bearings and bushings with inner ring diameters of 12 to 38mm.

Product code: G30301

Puller hub / bearing Mondeo IV; Focus II RS (FORD 1 463 833)

Product code: W0506

Key viscous clutch Ford Transit 2.3 2.4 3.2 (2001 – 2006)

Product code: W0416

Lock Crankshaft VW AUDI V6 diesel; gasoline

Product code: W0418

Wrench for alternator, VW, Audi, Mercedes (length 30mm, width 19.6mm)

Wrench for alternator, VW, Audi, Mercedes (length 30mm, width 19.6mm)

Product code: W0015

Puller arm forward bushing Renault Laguna I (under a hydraulic press)

Puller arm forward bushing Renault Laguna I (under a hydraulic press) (nr. oe 77 00 822 503)

Product code: W0170

Puller arm forward bushing Renault Laguna I

Puller arm forward bushing Renault Laguna I (nr. oe 77 00 824 042)

Product code: W0171

Rear beam bushing puller BMW E32 / E34 (nr. oe 3331112670)

Rear beam bushing puller BMW E32 / E34 (nr. oe 3331112670)

Product code: W0181

Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot

Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot

Product code: W0195

Front suspension bush axle beam tool L, R, Opel Astra G, H, Zafira

Front suspension bush axle beam tool Left, Right, Opel Astra G, H, Zafira (nr. oe 352 364)

Product code: W0175

Refractometer optical fluid tester

Professional optical fluid tester, automotive refractometer is used to measure the freezing temperature of the refrigerant fluid, washer fluid and electrolyte density.

Product code: CKB04033

Puller sleeve (only for pressing) of the rear beam Citroen / Peugeot

Puller sleeve (only for pressing) of the rear beam Citroen C4 / Peugeot 307

Product code: W0186

Wrench for rim unscrewing, ABS Renault Maskot, Master

Wrench for rim unscrewing, ABS Renault Maskot, Master

Product code: W0095

Tool for hub removal (set of 15 screws)

Tool for hub removal – cars of A, B, C class and others. Set of 15 screws.

Product code: W0072

19pcs 1/2" socket set for 6 (torx) and 12 point screws. Sizes: 8-32mm

Suitable for both metric and inch (SAE) standards 6 and 12 point screws with 8 to 32mm sizes.

Product code: G13546

Puller sleeve rear beam Mercedes S Class W220 C215 (oe numbers 220 351 11 42 221 350 01 75)

Product code: W0453

Beam puller for timing wheels

Beam puller for timing wheels

Product code: W0033

Puller hub bearings Renault Trafic, Opel Vivaro 2.0 DCI

Product code: W0487

Puller sleeve rubber front, rear sleds BMW Series 5, 6, 7 (33316775781, 33316792873)

Product code: W0444

Suspension support rod measuring tool

The device is designed for precise measurements of the curvature of the front suspension support pipes. Dial indicator not included.

Product code: C06/0212

Piston ring compressor pliers

Piston ring compressor pliers. Operating range: 110-160mm.

Product code: CKB04082

Puller arm bushing rear Fiat Bravo II (No.sleeves 50700796 )

Product code: W0377

Piston ring compressor 3", 53-175mm

3" piston ring compressor. Ø 53/175mm

Product code: JBM52696

Drain plug wrench

Drain plug wrench. Square heads 8mm and 10mm. For vehicles Citroën, Renault, Peugeot.

Product code: JBM52617

Cylinder leakage tester

Quickly determines piston, ring and valve faults. Measuring range 0-7bar (0-100psi), spark plug adapters 10, 12, 14mm

Product code: MG50185

Oil pressure tester kit, hose with quick couplers, 10 adapters

For oil pump, pressure tester, oil pressure switch testing. Hose with quick couplers, with 10 adapters

Product code: MG50188

Piston ring expander, 120-160mm

Piston ring expander, clamping capacity 120-160mm

Product code: MG50335C

Valve spring removal tool for 8V, 12V, 16V engines

Valve spring removal tool for 8V, 12V, 16V engines.

Product code: W0024

Crankshaft pulley puller VW / Audi 4 and 5 cylinder

Crankshaft pulley puller VW / Audi 4 and 5 cylinder

Product code: W0173

Brake piston driver

Device for screwing the brake pistons.

Product code: CKB04078

O-ring and oil seal removal tool

Universal double hook puller for removing O-rings and oil seals.

Product code: CKB04117

Engine cylinder honing tool 45-88mm

Has 3 grinding stones and a spring to grant smooth operation. For sleeves with diameters of 45-88mm. Attachable to drills.

Product code: CKB04137

Wrench for timing belt tightener, motors of VAG cars

Wrench for timing belt tightener, motors of VAG cars

Product code: W0039

Adapter puller valve springs 16V

Product code: W0440

Key fuel filter Ford Transit 2.2 TDCI

Product code: W0625

Puller for 'swinging bushing 'rear suspension arm BMW 1, 2, 3, 4, X1, X3, X4, i8 (33 32 6 792 553)

Product code: W0627

Engine timing tool set for Opel 1.6 CDTI Ecoflex

Engine timing tool set for Opel 1.6 CDTI Ecoflex

Product code: C01/0237

Ball joint press set

For the removal of ball joints, U-joints, brake anchor pins, and more on most 2 wheel drive (2WD) and 4 wheel drive (4WD) vehicles without removing the control arm from the vehicle.

Product code: CKB04009

Hydraulic hose crimping tool set

Set contains the hand-operated hydraulic crimping tool, four sets of dies for standard fittings and four sets of dies for reduced barrier fittings.

Product code: G00905

Internal bearing extractor set. Diameters: 8-58mm

Precision puller for tight-fitting, internal bearings and bushings.

Product code: G02577

Non-marring hook, pick and prying tool set, 6pcs

This set allows you to remove, clean, and work on trim clips, oil seals, grommets, O-rings, air vent assemblies, tight gaps in interior automotive compartments, delicate wiring, composite electrical connectors, and other sensitive finished components.

Product code: JBM54142

Jointed glow plug socket set, 8-16mm

Jointed glow plug socket set, 3/8", length 158mm, sizes 8, 9, 10, 12, 14, 16mm

Product code: MG50377

Universal pulley fan clutch holder

Designed to remove and install fan clutch and rotate or restrain the camshaft pulley. Adjustable jaw spread and interchangeable pins.

Product code: CKB04049

Bearing and gear puller with 3 jaws. Working range: up to 10" (254mm)

Bearing and gear puller with 3 jaws. Working range: up to 10" (254mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02234

Compression pressure test set for diesel engines

With the help of the gauge you can measure the pressure in each cylinder. It allows you to quickly identify damaged fuel pumps. Max. pressure 70bars (1000psi).

Product code: G02515

Universal oil filter wrench 80-105mm

Two way filter wrench is designed for the removal and installation of oil filters in cars. For diameter (min-max): 80 - 105mm.

Product code: G02559

Tube double flaring tool set, 10pcs

Tube double flaring tool set, 10pcs, tube sizes: 3/16", 1/4", 5/6", 3/8", 7/6", 1/2", 5/8"

Product code: G02721

Clutch aligning tool with 3 sleeves

A high-quality universal tool for locking the clutch disc, ideal for manual alignment (centering) and applying the clutch disc to the pressure plate in cars and vans.

Product code: G02766

Self-adjusting oil filter wrench, 63-102mm

1/2" self-adjusting oil filter wrench, opening 63-102mm, the jaws are adjustable by applying torque to the square drive

Product code: MG50033

Sleeve puller, rear beams BMW E39 (sleeve oe no. 3317 1093 008)

Sleeve puller, rear beams BMW E39 (sleeve oe no. 3317 1093 008)

Product code: W0158

Press, puller for bolts, strengthened (W0027, W0102)

Press, puller for bolts, strengthened (W0027, W0102)

Product code: W0134

Adapter for removing bolts VW Crafter, Mercedes Sprinter 906

Adapter for removing bolts VW Crafter, Mercedes Sprinter 906. Cooperate with W0027, W0133, W0134 etc.

Product code: W0141

Crankshaft front oil seal puller for Iveco, Fiat 2.3

Crankshaft front oil seal puller for Iveco, Fiat 2.3

Product code: W0437

Puller sleeve rocker back Fiat Doblo 2010 - (oem sleeve FIAT 51930337)

Product code: W0523

Timing locks for BMW M60 and M62 3.0, 3.5, 4.0, 4.4, 4.6 engines

Applicable for engines: M60 - 730i, 740i (94-96), M62 - 535i, 540i (96-00), 735i, 740i (96-02), 840i (93-99), X5 4, 4.6 (99-03).

Product code: C01/0060

Cam belt tension gauge

The timing belt tension indicator can be used to adjust the timing belt movement in ranges of 1daN to 10daN. 

Product code: CKB01597

Puller sleeve right front beam Ford Focus II; III; C-Max; Volvo (no oe. 1326988, 4M515L021AB, 1326988, 23033, 30714550, FM-FOC5

Product code: W0370

Pneumatic ATF fluid extractor / dispenser 10l

Pneumatic fluid changer for replacing oil in automatic gearboxes and differential gearboxes. The set includes 13 adapters for a wide range of automatic gearboxes (VAG, BMW, Ford and Mercedes-Benz)

Product code: CKB03689

Ball joint separator and installer tool set

This ball joint tool kit is suitable for removing and fitting press-fit type ball joints without removing the vehicle's control arm. The pressing device's gap size is 152mm.

Product code: CKB04011

Puller / Press sleeve "candy" trailing arm rear FORD Focus complete

Product code: W0385

Fish tape, 15m, red

15m steel cable fish tape in plastic red case. Flat metal tape, size 3x1mm. Insertion head size 40x10x3mm.

Product code: FT50-RED

Sleeve puller, rear beams FIAT Panda 2003-

Sleeve puller, rear beams FIAT Panda 2003-

Product code: W0107

Puller sleeve back beam BMW 5 (E 60, E61) BMW 6 (E63, E64) (OE 33 31 6 770 826)

Product code: W0519

Rear beam puller for Opel Corsa B, C, Tigra (oe bushes 24443815; 5402636)

Product code: W0539

Bearing and gear puller with 3 jaws. Working range: up to 3" (75mm)

Bearing and gear puller with 3 jaws. Working range: up to 3" (75mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02230

Bearing and gear puller with 3 jaws. Working range: up to 6" (152mm)

Bearing and gear puller with 3 jaws. Working range: up to 6" (152mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02243

Digital compression tester

Digital compression tester with clear LCD display. Measures the pressure in the combustion chamber of the petrol engine.

Product code: G02509

Adapter set for gearbox fluid change (ATF)

Adapter set for gearbox fluid change (ATF).

Product code: G02733

Transmission oil dipstick for Mercedes-Benz

Transmission oil dipstick for Mercedes-Benz. Lenght: 1220mm

Product code: G03260

Injector puller with system Bosch M17x1 with screw

Product code: W0599

Windshield wiper puller

Windshield wiper puller, max. diameter 45mm, min. diameter 17mm, simple handling, safe mechanism, design with thin legs and brass-finished ends. Weight 0.2kg.

Product code: JBM52454

Universal belt tensioner wrench set

Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm

Product code: JBM52832

Anti-freeze tester

Anti-freeze tester, Measuring range: -43ºC to 131ºC

Product code: JBM53453

Cup-type oil filter wrench set, 30pcs

Twin-function oil filter wrench set (65-120mm), square drive: 1/2", 3/8", self-setting oil filter wrench. For almost every car type.

Product code: MG50038

Turbo Pressure Gauge, 1 to 3bar

It is fitted with 2m tubes within 1-3 bar. When the performance of the car falls, it is worth checking the turbo charge when it comes to heavy acceleration.

Product code: MG04A3069D

Scriber

Curved/straight scriber

Product code: MG50252

Wheel Bearing tool VW

Bearing installation and removal tool for 85mm bearings. Application Volkswagen Touareg, Transporter, Multivan & T5

Product code: MG50432A

Set for dismantling of injectors, Bosch and others

Set for dismantling of injectors, Bosch and others

Product code: W0091

Adapters for press, puller for bolts, Master, Movano, Interstar

Adapters for press, puller for bolts, Renault Master, Opel Movano, Nissan Interstar

Product code: W0102

Puller for rear beam sleeve, Ford Fiesta, Ka

Puller for rear beam sleeve, Ford Fiesta, Ka

Product code: W0114

Press, puller for bolts Renault Master / Opel Movano

Press, puller for bolts Renault Master / Opel Movano + W0160 adapter

Product code: W0161

Puller bushings rear beam Renault Laguna II set (5 adapters to org and not of original sleeves)

Product code: W0330

Crankshaft front oil seal puller for Iveco 3.0

Crankshaft front oil seal puller for Iveco 3.0

Product code: W0434

Adapter puller valve springs 20V

Product code: W0441

Adapter puller valve springs 8V

Product code: W0442

Key clutch disc air conditioning Denso 47,5 mm (hardened)

Product code: W0446

Nut wrench fuel pump Fiat Ducato Peugeot Boxer Jumper

Product code: W0620

Rear crankshaft seal replacement tool for Iveco, Fiat, Citroen, Peugeot 3.0

Rear crankshaft seal replacement tool for Reinz, Erling, Glaser 13.65mm seals

Product code: W0640

Opel rear axle bushing removal tool (OE: 4 02 952, 54 02 637)

Opel Astra H, Zafira B, Meriva B rear axle bushing removal tool (OE: 4 02 952, 54 02 637)

Product code: W0652

Wave staples for hot stapler, 0.8mm

Wave staples for hot stapler ø=0.8mm wire, 100pcs

Product code: 804078

Puller bush Front swingarm VOLVO S60 I, S80 (TX, XY), V70 I and II (oe sleeves 9461626)

Product code: W0482

Face mill for crankshaft, VW TDI 1.9 2.5

Face mill for crankshaftshaft for VW TDI 1.9, 2.5 engines

Product code: W0017

Puller / Press sleeve "candy" of the trailing arm rear Ford Mondeo MK 4 2007 -

Product code: W0364

Wrench for alternator coupler, VALEO-Renault, Volvo (hardened)

Wrench for alternator coupler, VALEO-Renault, Volvo (hardened)

Product code: W0052

Puller for belt pulleys, three-arm

A puller for removing gears. Central screw diameter: 16mm. Adjustable clamping diameter: 42-82mm. Arm length: 35mm. Full length: 55mm.

Product code: W0068

Puller for belt pulleys, three-arm with extended arms

Puller for belt pulleys, three-arm with extended arms

Product code: W0070

Wrench for shaft belt pulley unscrewing, BMW diesel

Wrench for shaft belt pulley unscrewing, BMW diesel, E87,E46, E60,,E61,E90,E91

Product code: W0082

Puller for belt pulleys, four-arm, 60mm

Puller for belt pulleys, four-arm, 60mm

Product code: W0089

Wrench for damper pin locking/unscrewing, Ducato, Jumper, Boxer

Wrench for damper pin locking/unscrewing, Ducato, Jumper, Boxer

Product code: W0090

Universal puller (screw L=100mm, hole distance 27-62mm)

Universal puller (screw L=100mm, hole distance 27-62mm)

Product code: W0136

Hardened M12 nut with bearing for pullers

Hardened M12 nut with bearing for pullers

Product code: W0149

Timing tool set VW Transporter / Touareg / Phaeton, 2.5 TDI PD

Timing tool set VW Transporter / Touareg / Phaeton, 2.5 TDI PD

Product code: W0199

Injection pump wrench set for Bosch, Lucas etc., 6 pcs special keys

Injection pump wrench set for Bosch, Lucas etc., 6 pcs special keys

Product code: W0235

Injector puller for Fiat Ducato, Iveco Daily, Iveco Turbo Daily 2.3, 2.8, 3.0

Injector puller for Fiat Ducato, Iveco Daily, Iveco Turbo Daily 2.3, 2.8, 3.0 (from 1999 onwards)

Product code: W0310

Key oil filter Fiat, Opel, Alfa Romeo 1.3, 1.6, 1.9. 2.0 - 75.3 x 16 hexagonal

Product code: W0484

Broken glow plug reamer ⌀7mm

Broken glow plug reamer ⌀7mm

Product code: W0632

Puller (32x1,25) To pull sprocket a chain and the sleeve damper crankshaft in the DKW SB 350, NZ 250, NZ 350, F8 other model

Product code: W426K

Puller injector adapter HDI 2.0, 1.3 CDTI – Hardened

Product code: W0409

Puller injectors 2.0 HDI

Product code: W0411

Puller arm sleeve Front Peugeot 406 ( oe. 352360 )

Product code: W0422

Tool for setting the bearings of the VW Audi 7 speed DSG gearbox

Product code: W0692

Valve stem seal remover and installer kit

Valve stem seal remover and installer kit. Adapter sizes: 5, 5.5, 6, 6.5, 7, 8, 9.53, 10.8, 14.8mm.

Product code: CKB04046

Cylinder honing tool. For diameters: 51-177mm

Cylinder honing tool. For diameters: 51-177mm

Product code: CKB04138

Puller for double-row bearings of wheel hub

Puller for double-row bearings of wheel hub

Product code: W0037

Plastic vacuum pump set

It is perfect for performing such works as: bleeding brake systems and checking vacuum sensors, brake boosters, throttle valves, exhaust gas recirculation valves, pressure modulators in automatic transmissions, etc.

Product code: G01157

Universal ball joint puller for pins up to 20mm in diameter.

Universal ball joint puller with lever. Made of forged steel. Its compact size allows you to work in hard to reach areas.

Product code: G02583

Slide hammer, weight 1kg, M12/M16

Slide hammer, weight 1kg, M12/M16

Product code: W0065

Valve seal removal and installer set

Set for removing and installing valve seals in multi-valve engines. 5, 5.5, 6, 6.5, 7, 8, 10mm adapters and 2 tips for inserting long sealants.

Product code: G02611

Chain breaking and riveting tool set

Designed for breaking and riveting drive chains. Suitable for car, motorcycle, bicycle chains.

Product code: G02682

Chain tensioner BMW N40, N42, N45, N46, N52 and N54 / Mini N12, N14, N16 and N18

Product code: W0585

Pneumatic CV boot installation tool (8bar)

The CV boot installation tool is to be used solely for the stretching of flexible CV boots onto drive-shaft assemblies of automotive vehicles.

Product code: JBM52994

Slide hammer, weight 2.5kg, M12/M16

Slide hammer, weight 2.5kg, M12/M16

Product code: W0067

VW Crankshaft sealing flange removing and installing tool (diesel)

Specially designed tool to renew crankshaft sealing flange.

Product code: MG04A1028

Puller / Adapter to pull the injector Renault 2.3 after 2012 (20mm)

Product code: W0467

Wheel bearing removal/installation tool set 50-88mm

Diminishes the possibility of wheel bearing damage during removal and installation. Sizes (d) 50, 55, 60, 64, 67, 70, 72, 74, 75, 78, 82, 84, 88mm.

Product code: MG50075

Valve stem seal pliers set

Valve stem seal pliers, deep seal driving sockets diameter 10.8-14.8mm, seal driving adapters 5, 5.5, 6, 6.6, 7, 8mm and 3/8"

Product code: MG50105

Panel removal tool set, 11pcs

Panel removal tool set, 11pcs. Material: very hard, special plastic. Suitable for working on doortrims, body line mouldings, O-rings

Product code: MG50200

Lock crankshaft BMW 1.6 / 2.0 / 3.0 - N47 / N57

Product code: W0489

Engine Timing BMW 2.0 , 3.0D N47 / N47S / N57 Diesel (2007 - 2012)

Product code: W0491

Oxygen sensor socket set

Sizes: 3/8" drive, 22mm, 6-point, 3/8" drive, 22mm, 6-point, dep, 1/2" drive 22mm, 12-point

Product code: MG50627

Puller Injectors Fiat Opel Suzuki 1.3 JTD CDTI DDIS

Product code: W0494

Puller hub bearing the brake disc Ford Transit

Product code: W0500

Puller sleeve back beam BMW 1, 3, X1, oe sleeve 33 17 6 760 287, 33176760287

Product code: W0505

Puller sleeve back beam (middle) BMW 5 (E 60, E61) BMW 6 (E63, E64) (oem 33176770825)

Product code: W0520

Valve lapping tool set for drills, 6pcs

This tool smoothens the surfaces of new valves, ensuring that they fit firmly into the cylinders. Suction cup diameters: 16, 20, 30, 35, 40mm.

Product code: JBM54033

Adapter for loosening stuck M14x1 injectors

Adapter for loosening stuck M14x1 injectors

Product code: W0536

Fuel line disconnect plier set, 3pcs

3pcs fuel line coupling disconnect pliers

Product code: JBM53445

Puller injectors Citroen Jumper; Peugeot Boxer; Fiat 2.3 JTD HPI

Product code: W0560

Clutch centering mandrel, 2pcs

2pcs clutch centering mandrel, Ø20-26mm, Ø15-19mm

Product code: JBM53392

The key to the timing belt ribbed Ford 2.0, 2.2, 2.4 TDDI / TDCI

Product code: W0296

Oil pressure tester kit, hose with quick couplers, 10 adapters

For oil pump, pressure tester, oil pressure switch testing. Hose with quick couplers, with 10 adapters

Product code: JBM52754

Removal tool soft grip swivel 500mm

Removal tool soft grip swivel 500mm. Polymer strap (high resistance) 540 x 20 mm. Ø 150mm. Dentated surface for optimal grip.

Product code: JBM52416

Injector puller Opel Vivaro 2.0 CDTI

Injector puller Opel Vivaro 2.0 CDTI

Product code: W0220

Double-row bearing puller and wheel hubs II version (BMW, Mercedes etc.)

Double-row bearing puller and wheel hubs II version (BMW, Mercedes etc.)

Product code: W0205

Puller sleeve rear beam Opel Zafira A; Astra G; Combo; Meriva A (oe number 402644)

Product code: W0371

Puller sleeve rear beam (small) for BMW X5 E53, M57 etc.

Puller sleeve rear beam (small) (No. oe 33 17 6 770 457) for BMW X5 E53, M57, M57N, M54 etc

Product code: W0250

Puller sleeve rear beam (large) for BMW X5 E53, M57 etc.

Puller sleeve rear beam (large) (OE no. 33 31 1 093 662, 33 31 6 770 454) for BMW X5 E53, M57 etc.

Product code: W0251

Puller sleeve upper arm rear lateral (crescent / banana)

Puller sleeve upper arm rear lateral (crescent / banana) Ford Focus I, II Sedan, Combi, Ford C-Max, Mazda 3, 5; Volvo S40 II, V5

Product code: W0254

Timing tool set Audi VW 3.3 ; 3.7 ; 4.2 A6 A8

Timing tool set Audi VW 3.3 ; 3.7 ; 4.2 A6 A8

Product code: W0270

Universal fuel pump wrench 45-190mm

Universal fuel pump wrench 45-190mm.

Product code: W0387

Press the king pins the upper and lower Jeep - Cherokee, Grand Cherokee, Wrangler

Product code: W0401

Fuel pump wrench for Volkswagen Crafter 2006-2016

Wrench for loosening the fuel pump nut on Volkswagen Crafter 2006-2016

Product code: W0483

Puller sleeve rear beam Front Bmw Series 5,6,7 / F 10, F11, F12, 13, F01 (33316790573, 33 31 6 775 780)

Product code: W0488

Short bolt M12 L 150 mm / used in sleeve pullers

Product code: W0530

Injector puller for for removing Denso injectors M25x0,5 on Toyota and Mazda

Injector puller for for removing Denso injectors M25x0,5 on Toyota and Mazda

Product code: W0535

The viscous clutch key Volkswagen LT 2.5 TDI

Product code: W0550

Lock (adapter; pin) timing Renault / Nissan 1.6 DCI R9M

Product code: W0553

The key to the oil filter Kia / Hyundai 2.0 2.2 CRDI - 42-43 mm

Product code: W0594

The key to the unscrewing of the valve of the injector Siemens

Product code: W0657

Set for removing injectors Delphi 2.0 HDI (12mm) ( Delphi 28388960 )

Product code: W0661

Key to block unscrewing of the pulley Mercedes-Benz M272 / M273 engine

Product code: W0677

Pin socket wrench arm Citroen / Peugeot 405 (hardened)

Pin socket wrench arm Citroen / Peugeot 405 (hardened)

Product code: W0194