
Wishbone lever tool, sliding type, lockable at 5 points
Product code: MG50417
- Budapest: 3
- Debrecen: 6

Product description
Description
The design of the swing arm tensioner with sliding rails allows the mounting rails to be placed in the desired position and adjusted to the part to be fastened. This makes the tensioner easily compatible with different types of swingarms or other components that it can be used to secure. It can be used to fix rocker arms or other parts at five different points. This increases stability and safety and minimizes movement or vibrations in the swingarms.
Made of steel, this product is also strong and durable, and its thoughtful rubber grip design allows you to hold it comfortably for long periods and without slippage.
With this lever tool, car chassis separation can be done safely and comfortably by one person.
Specifications
- Sliding type
- Lockable at 5 points
- For replacing and installing swingarms and suspensions
- Length: 1170mm
Product packing
Pack number | Dimensions | Weight |
---|---|---|
1 | 115 x 32 x 5 cm | 4.8 kg |
Delivery fee
Delivery method | Gross price |
---|---|
Pickup in Nagytarcsa | 0,00 € |
Pickup in Debrecen | 0,00 € |
DHL Worldwide Express | 104,97 € |
More products in this category

Rear axle nut wrench for Renault, Nissan, VW, Opel, Mercedes
For loosening the groove nut on rear wheel hubs. OEM codes: T50017, CH50112, 906589000700, 8201079089
Product code: W0608

Ball joint separator set, 3pcs
Ball joint separator designed for removing the track rod end from the steering arm without doing damage to the taper pin. Suitable for most small cars and light vans.
Product code: DK-230503

Wrench for damper pin locking/unscrewing, Ducato, Jumper, Boxer
Wrench for damper pin locking/unscrewing, Ducato, Jumper, Boxer
Product code: W0090

Ball joint socket wrench for Renault Master III, Opel Movano B
Ball joint socket wrench for Renault Master III, Opel Movano B.
Product code: W0469

Front axle hub socket wrench for Suzuki Jimny, Vitara, Grand Vitara
Front axle hub socket wrench for Suzuki Jimny, Vitara, Grand Vitara. Diameter: 56mm, hexagonal drive.
Product code: W0562

Pneumatic CV joint boot install tool
This pneumatic CV joint boot install tool makes installation fast and easy. It prevents boot damage and ensures a tight fit. Simply adjust the air control switch and place over the CV joint. Lubricate before use. Working pressure: 5-9bar. Perfect for auto mechanics!
Product code: MG04B1085

Wrench for the front wheel hub nuts of Iveco 35 vehicles
Special key for mounting and dismounting the front hub nut of Iveco 35 vehicles. Inner diameter: 62.5mm.
Product code: W0502

Socket wrench key for Citroen and Peugeot swingarms
Socket wrench key for Citroen Berlingo, C4 and Peugeot 307, 308, 5008 swingarms.
Product code: W0362

Wheel hub nut socket wrench for Renault
Wheel hub nut socket wrench for Renault Mascott, Midlum, Premium (nut OEM 5010372353).
Product code: W0309

Rocker pin puller and press for T4, Master, Movano, Interstar, Sprinter, VW LT
Press for upper bolts T4, Master, Movano, Interstar and lower bolts Sprinter, VW LT
Product code: W0093

Puller for front control arm pins of Renault Master, Opel Movano
Puller for front control arm pins of Renault Master, Opel Movano
Product code: W0045

Ball joint removal set, 5pcs
Designed for easy removal of most popular types of pitman arms, tie rods and ball joints. Operation range: 17, 19, 21, 23, 27mm
Product code: DK-230506

Pneumatic CV boot installation tool (8bar)
The CV boot installation tool is to be used solely for the stretching of flexible CV boots onto drive-shaft assemblies of automotive vehicles.
Product code: JBM52994

Wrench for Iveco 35 front wheel hub nuts
Wrench for Iveco 35S, 35C front wheel hub nuts.
Product code: W0664

Wishbone lever tool
Wishbone lever tool, Length: 1180mm, Tube: Ø 3.5cm, Brace distance: 50 - 45 - 40 - 35 - 30cm, Fastening support: 15 x 13cm
Product code: JBM51902

Axial joint tool, 27-42mm
Axial joint tool, 27-42mm can be used to remove and attach the axial joints.
Product code: MG50444

Axial joint tool, 33-42mm
Axial joint puller/installer. 1/2", clamping capacity: 33-42mm
Product code: MG50443

Ball joint and silent block remover/installer set
Suitable for any passenger car, utility trucks and SUV vehicles, in which the ball joints have an interference fit. The tools allow for easy removal and installing without large-scale demounting.
Product code: MG50042

Hydraulic cylinder press for silents 12T
Press for extruding bolts and ball joints with a 12 ton press capacity.
Product code: C02/0136

Universal press for extracting and pressing pins and silents
Its main purpose is the disassembly and assembly of silents in the suspension. Adapters not included.
Product code: C02/0135

Suspension support rod measuring tool
The device is designed for precise measurements of the curvature of the front suspension support pipes. Dial indicator not included.
Product code: C06/0212

Press, puller for bolts of suspension arms Opel, Renault, Nissan
Press, puller for upper and lower ball bolts of the suspension arms in Master, Movano, Interstar.
Product code: W0100

Press the king pins the upper and lower Jeep - Cherokee, Grand Cherokee, Wrangler
Product code: W0401

Adapters to bolts down Jeep - Cherokee, Grand Cherokee, Wrangler
Product code: W0398

Adapters Bolt crossover top Jeep - Cherokee, Grand Cherokee, Wrangler
Product code: W0312

Adapters for mounting and dismounting the front control arm bolts Renault Scenic II; Grand Scenic II; Megane II; Dacia Logan
Product code: W0353

Press the upper crossover pins Jeep Cherokee, Grand Cherokee, Wrangler
Product code: W0313

Press, puller for bolts of suspension arm, front Master/Movano/Interstar
Press, puller for bolts of suspension arm, front Renault Master / Opel Movano / Nissan Interstar
Product code: W0097

Press the down crossover pins Jeep Cherokee, Grand Cherokee, Wrangler
Product code: W0399

Silent puller for VW, Audi, Seat, Skoda engines and gearboxes
Allows the replacement of engine and gearbox silent blocks in VAG engines.
Product code: W0521

Steering rod wrench
Allows the inner tie rod to be removed and installed without removing the rack.
Product code: W0168

Press the front control arm bolts Renault Scenic II; Grand Scenic II; Megane II; Dacia Logan
Product code: W0352

Camber angle setting tool
Camber angle setting tool
Product code: W0183
