Front control arm bushing puller Renault Laguna II, Trafic II
Product code: W0368
Brand: Lincos
Product description
Description
Designed to remove the old rubber bushings from the control arm without damaging the arm or the new bushings. The central bolt is tightened using a wrechs, which applies pressure to the bushing and forces it out of the control arm.
Application
- Renault: Laguna mk2 2001-, Laguna mk2 Grandtour, Espace mk4 2002- \ , Vel Satis 2002-
OE codes
- Renault 8200002868
- Birth 2475
- Boge 88-289-a
- Delphi Td581w
- First Line Fsk6489
- Hutchinson 590151
- Lemförder 27722
- Lemförder 27722 01
- Mapco 33121
- Metalcaucho 4487
- Metzger 52023308
- Metzger R-sb22
- Meyle 16-14 610 0003
- Monroe L25818
- Moog Re-sb-2830
- Renault 82 00 002 868
- Rts 017-00424
- Swag 60 92 2821
- Topran 700 287
- Triscan 8500 25818
- Vemo V46-9591
Product packing
| Pack number | Dimensions | Weight |
|---|---|---|
| 1 | 22 x 21 x 7 cm | 2.7 kg |
Delivery fee
| Delivery method | Gross price |
|---|---|
| Pickup in Nagytarcsa | 0,00 € |
| Pickup in Debrecen | 0,00 € |
| DHL Worldwide Express | 87,16 € |
More products in this category
Universal bearing removing/installing kit, 34-84mm
Spindle: M10xP1.5, M12xP1.75, M14xP2.0, M16xP2.0, length/Ø A 44/34, 46/36, 54/44, 56/46, 58/48, 66/56, 68/58, 70/60, 78/68, 80/70, 84/72, B 48/38, 50/40, 52/42, 60/50, 62/52, 64/54, 72/62, 74/64, 76/66mm
Product code: MG50093
Sleeve, bearing and silent press kit, 27pcs
Inside diameters from 34-80mm in 2mm steps, outside diameters from 44-80mm in 2mm steps, pulling spindles with nuts.
Product code: DK-230581A
Universal silent block remover/installer set, 34-72mm, 44-82mm
Our universal silent block remover/installer set makes extracting and installing silent blocks, hydraulic bearings, and more a breeze! With spindles and press adapters in various sizes, this set is perfect for any job.
Product code: MG50605
Universal press and pull sleeve kit, 34-82mm
Spindle: M10, M12, M14, M16, M18, Adapters (Outer/inner diameter): 74/54mm, 76/56mm, 78/58mm, 72/52mm, 70/50mm, 68/48mm, 80/60mm, 82/62mm, 66/46mm, 64/44mm
Product code: JBM52494
Puller arm bushings front / rear, SEAT Leon, Toledo II, Skoda Octavia, VW Bora, Golf IV
The bushing puller is a tool for removing front and rear wheel hub bushings for SEAT Leon, Toledo II, Skoda Octavia and VW Bora, Golf IV models.
Product code: W0231
Puller bushings front control arm Renault Clio II; Renault kangoo I; Thalia I ( nr oe tulei 7700424399 )
Product code: W0337
Puller for swingarm bushing rear top Toyota Avensis II, Celica, Auris, Lexus CT (bushing 48770-05010, 48770-21011)
Product code: W0628
Rear beam bushing puller Ford Fiesta V, MK5; Fusion; Mazda 2 (Febi 27245; Ford 1 426 699)
The Rear Beam Bushing Puller is a specialized tool designed for the assembly and disassembly of rear beam bushings in Ford Fiesta V (MK5), Fusion, and Mazda 2 vehicles. This tool is specifically engineered to simplify the process of removing and installing rear beam bushings.
Product code: W0705
Puller front lower bushing control arm Renault Laguna, Espace Trafic, Opel Vivaro (No. oe bushings 82 00 002 869)
Product code: W0326
Puller arm bushings rear axle Ford Galaxy, Seat Alhambra, VW Sharan
Puller arm bushings rear axle Ford Galaxy, Seat Alhambra, VW Sharan (oe VW 7M0 407 181 A)
Product code: W0233
Rear control arm bushing puller for BMW
Rear control arm bushing puller for BMW E60, E61, E63, E64, E65, E53.
Product code: W0376
Bushing puller and press for Fiat, Opel rear arms
Silent puller and press for Fiat Doblo (2009 and on) rear arms.
Product code: W0658
Puller arm forward bushing Renault Laguna I
Puller arm forward bushing Renault Laguna I (nr. oe 77 00 824 042)
Product code: W0171
Puller arm forward bushing Renault Laguna I (under a hydraulic press)
Puller arm forward bushing Renault Laguna I (under a hydraulic press) (nr. oe 77 00 822 503)
Product code: W0170
Rear axle bushing press for Toyota Yaris, Passo, Echo
The Rear Axle Bushing Press is designed to facilitate the installation or replacement of rear axle bushings in Toyota Yaris, Passo, and Echo models. Rear axle bushing press for Toyota Yaris, Passo, Echo. Bushing
Product code: W0720
Puller for rear steering knuckle bushing for KIA and Hyundai
Rear steering knuckle silent puller for KIA, Hyundai.
Product code: W0667
Puller bushing front control arm Renault Laguna II; Espace IV ( nr oe 8200002868 ; FE22821 )
Product code: W0334
Silent puller for VW, Audi, Seat, Skoda engines and gearboxes
Allows the replacement of engine and gearbox silent blocks in VAG engines.
Product code: W0521
Rear bushing puller for Opel Corsa B, C, Tigra
Rear silent puller for Opel Corsa B, C, Tigra. Opel OEM: 24443815, 5402636.
Product code: W0539
Rear beam bushing puller BMW E32 / E34 (nr. oe 3331112670)
When working on a BMW 5 Sedan (E34), BMW 5 Touring (E34) or BMW 7 (E32), the rear suspension bushing puller makes it easy to remove the bushings from the suspension. This tool provides the proper grip and power transfer to easily and safely remove bushings from the suspension.
Product code: W0181
Puller the rear axle bushings Volkswagen / Audi / Seat after 2004
Product code: W0311
Rear beam bushing puller for BMW X5 E53
Rear beam bushing puller (No. oe 33 17 6 770 456) for BMW X5 E53
Product code: W0246
Puller for removing bushing the rear control arm Fiat Bravo II (No. oe bushing 50700796)
Product code: W0378
Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot
Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot
Product code: W0195
Rear control arm bushing puller Ford, Volvo
Rear control arm bushing press and puller for Ford and Volvo. Puller and press tool for rear trailing arm bushes. The tool is used to assemble and disassemble bushings without the need to dismantle the swing arm. Threads should be lubricated with grease before use.
Product code: W0671
Hollow hydraulic cylinder 20t
Hydraulic cylinder with through and threaded hole. It can be used with various types of mechanical presses that are designed for the extraction of metal and rubber silents, pins, joints, etc.
Product code: C07/0112
Press for bushings and silents for hydraulic cylinder 12T
Press for pins and bushings without adapters. Can be used with a hydraulic cylinder.
Product code: C02/0149
Universal press for extracting and pressing pins and silents
Its main purpose is the disassembly and assembly of silents in the suspension. Adapters not included.
Product code: C02/0135
Adapter set for bushings of swingarm pins for VW T4, LT, Crafter, Mercedes Sprinter
Adapter set for bushings of swingarm pins for VW T4, LT, Crafter, Mercedes Sprinter
Product code: C02/0146
Silent remover and installer press with adapters for Movano, Master, Nissan
Press with bushing sleeves for the top link of the swingarm of Opel Movano, Renault Master, Nissan Interstar. Universal press for extruding and pressing pins, metal-rubber sleeves, ball pins and many elements that are within the dimensions of the press.
Product code: C02/0145
Hydraulic cylinder press for silents 12T
Press for extruding bolts and ball joints with a 12 ton press capacity.
Product code: C02/0136
Bushing and silent puller adapter set for VW T4, LT, Sprinter, Movano, Master
Bushing and silent puller adapter set for VW T4, VW LT, Mercedes Sprinter, Opel Movano, Renault Master.
Product code: C02/0141
Sleeve puller, Golf IV, Audi A3, Skoda Octavia
Sleeve puller, Golf IV, Audi A3, Skoda Octavia
Product code: W0006
Sleeve puller for control arm rear axles for Fiat, Opel, Saab
Sleeve puller for control arm rear axles for Fiat, Opel, Saab
Product code: W0142
Puller sleeve for BMW bushings
Pulling tool for the assembly and thedisassembly of bushings on the car. BMW: 5 (E60), 5 Touring (E61), 6 (E63), 6 convertible (E64).
Product code: W0519
Puller for plastic sleeves, Skoda Fabia, VW Polo
Puller for plastic sleeves, Skoda Fabia, VW Polo.
Product code: W0005
Puller sleeve front beam Mercedes ML W163 (oe bushings 163 330 02 75/1633300275)
Product code: W0428
Sleeve puller for Ford Mondeo MK 4 (2007- ), Volvo rear swingarm
Tool for assembly and disassembly of the sleeve without the need to disassemble the swingarm.
Product code: W0364
Puller sleeves left front beam Ford Focus II; III; C-Max; Volvo (no oe sleeves 1695011, 1355621, 1695011,23032, 30666042, FM-FOC
Product code: W0369
Rear control arm bushing puller Hyundai, Kia
The rear control arm bushing puller Hyundai, Kia is a special tool used to install and remove rear steering linkage bushings on Hyundai and Kia vehicles. Rear steering link bushings are components that are found in the steering system and are important for stable steering and control of the vehicle.
Product code: W0668
Puller sleeve rear beam Front Bmw Series 5,6,7 / F 10, F11, F12, 13, F01 (33316790573, 33 31 6 775 780)
This tool is a great help in installing and removing the bushing. Puller sleeve rear beam is a high quality tool specially designed for Bmw Series 5,6,7 / F 10, F11, F12, 13, F01 models. This tool fits the vehicle perfectly and guarantees perfect operation and durability.
Product code: W0488
Sleeve puller, rear beams, BMW E39 sedan
The sleeve puller is used to remove and install the rear axle bushing.
Product code: W0096
Suspension bushing puller, Opel Vectra B, BMW E36
Ideal for the removal and refitting of the suspension bushes without removing the trailing arm assembly from the vehicle.
Product code: W0001
Sleeve puller, rear beams FIAT Panda 2003-
Suitable for disassembling and assembling the bushings on the car for FIAT Panda models after 2003.
Product code: W0107
Puller bushings rear beam Renault Laguna II (to no of original sleeves with flat his back)
Product code: W0329
Sleeve puller, Golf IV, Audi A3, Skoda Octavia for the sleeve FEBI
Sleeve Puller designed specifically for Golf IV, Audi A3, and Skoda Octavia vehicles, compatible with FEBI sleeves. Ensures a precise and secure grip for effective removal.
Product code: W0172
Sleeve puller, rear beams Mercedes Benz S Class W / V 220 and C215 CL
The bushing puller is used to remove and install the rear axle bushing.
Product code: W0157
Puller sleeve rear beam Renault Megane II; Scenic II; Grand Scenic II (oe sleeve 7701479190)
The Puller sleeve rear beam is a specialized tool to assist in the assembly and disassembly of rear beam bushings. This puller is specially designed for Renault Megane II, Scenic II and Grand Scenic II models.
Product code: W0379
Bushing puller, Citroen C5
Silent puller, Citroen C5 (sleeve OE no. 352384)
Product code: W0196
Puller for suspension arm bushings, Cinquecento, Seicento
Puller for suspension arm silent blocks, Cinquecento, Seicento
Product code: W0004
Front arm bushing puller BMW E39
The Front Arm Bushing Puller BMW E39 is a tool designed to remove the front arm bushing from the BMW E39 model.
Product code: W0057
Control arm bushing puller lower front Opel Astra G, H, Zafira, Vectra B
The control arm bushing puller for the lower front of Opel Astra G, Astra H, Zafira, and Vectra B is a specialized tool used to remove the control arm bushings in the front suspension of these vehicles.
Product code: W0190
Puller sleeve the arm forward (lower) L / R BMW X5 (E70) X6 (E71, E72), 3.0-4.8 (oe sleeve 31106778015)
The tool is used to remove and install the bushing sleeve without the need to disassemble the entire suspension system or remove the swing arm from the vehicle. It helps save time and effort during maintenance or repair procedures related to the front lower swing arm bushings.
Product code: W0501
Puller of bushings of the front control arm Volkswagen T4
The puller is used to install and remove control arm bushings on the car.
Product code: W0427
Puller sleeve back beam (middle) BMW 5 (E 60, E61) BMW 6 (E63, E64) (oem 33176770825)
This tool allows easy and safe removal of the center silencer from the rear beam without disassembling other components or the entire beam system.
Product code: W0520
Universal puller small metal-rubber sleeve
Universal puller small metal-rubber sleeve. It is a perfect and ideal tool for effective and safe bushing removal.
Product code: W0167
Front control arm bushing puller Renault Laguna II, Trafic II
Front control arm bushing puller Renault Laguna II, Trafic II. Renault silent OE: 8200000512.
Product code: W0368
Puller for suspension arm sleeves – front, BMW E 39 M5
This suspension arm sleeves puller is specially designed for BMW E39 535i ;540i M5 ; BMW 7 E38 models. The tool helps technicians to remove the suspension bushing easily and safely without damaging surrounding parts or the bushing.
Product code: W0086
Puller sleeves of rear beam / bridge Mercedes W210, W202, W203, W140 (OE 129 351 21 42)
The bushing puller is used to remove and install the rear axle bushing.
Product code: W0424
Puller sleeve right front beam Ford Focus II; III; C-Max; Volvo (no oe. 1326988, 4M515L021AB, 1326988, 23033, 30714550, FM-FOC5
Product code: W0370
Sleeve puller, rear beams, Fiat Punto
Sleeve puller, rear beams, Fiat Punto
Product code: W0058
Sleeve puller, rear beams BMW E39 (sleeve oe no. 3317 1093 008)
The tool is used to press in and out the bushing number oe 3317 1093 008 in cars.
Product code: W0158
Puller bushings rear beam Renault Laguna II set (5 adapters to org and not of original sleeves)
Product code: W0330
Bushing puller for BMW E36, Z3, E46 rear suspension arms
Bushing puller for BMW E36, Z3, E46 rear suspension arms.
Product code: W0083
Puller screw, M12, 250mm
Screw for bushing and sleeve pullers, M12, 250mm.
Product code: W0101
Rear beam silent puller for Renault Laguna III and Laguna Coupe
Rear beam bushing puller for Renault Laguna III and Laguna Coupe. OEM: 55 04 400 01R, 55 04 466 24R, 55 04 500 01R.
Product code: W0503
Sleeve and silent puller for BMW 1, 3, X1 rear arms
Sleeve and silent puller for BMW 1 3, X1 Hatchback, Coupe, Convertible, Saloon, Touring rear arms. (OE 33326763092)
Product code: W0587
Rear beam sleeve puller, Bmw Series 5,6,7 / F 10, F11, F12, 13, F01 (33 31 6775792, 33 31 6 793 864)
This puller helps you safely and efficiently remove the bushings that attach to the rear axle. The purpose of the tool is accurate and powerful removal, minimizing the risk of injury and facilitating service work.
Product code: W0490
Rear Suspension Bush Puller Ford Mondeo
Rear Suspension Bush Puller Ford Mondeo
Product code: W0020
Rear beam bushing puller for Mercedes S-Class (W220) CL-Class (C215)
The rear beam bushing puller is a specialized tool designed to remove the rear beam bushings from Mercedes-Benz S-Class (W220) and CL-Class (C215) vehicles. The rear beam bushings are essential components of the rear suspension system, and they help provide stability and control to the rear axle assembly.
Product code: W0453
Rear beam sleevepuller for assembly and disassembly AUDI A4, A4 Avant 94-01
Tool for installing and removing rear beam bushings, especially for Audi A4/A4 Avant 94-01 models.
Product code: W0479
Rear beam sleeve puller Opel Zafira A; Astra G ; Combo ; Meriva A (oe number 402644)
This rear beam sleeve puller is designed to assist installing and removing bushings directly on the vehicle. Built to be compatible with various Opel models, it provides a tight fit and smooth operation, eliminating potential damage to the bushing or vehicle.
Product code: W0371
Rear suspension bushing tool Renault Laguna II
Rear suspension bushing tool Renault Laguna II
Product code: W0047
Puller for rear beam sleeve, Ford Fiesta, Ka
Puller for rear beam sleeve is a specialized tool designed for Ford Fiesta and Ka models. This puller is an essential accessory for removing the rear beam sleeve, facilitating efficient and precise maintenance or replacement procedures.
Product code: W0114
