MIG-MAG/FLUX/BRAZING/MMA/TIG DC-Lift inverter welder Technomig 180 Dual Synergic, 1Ph 230V, Telwin

• This welding machine is a source of current for arc welding, made specifically for MAG welding carbon steel or weak alloys with CO2 protective gas or Argon/CO2 mixes, using full or core electrode wires.It is also ideal for MIG welding stainless steel with Argon gas containing + 1-2% oxygen and aluminium and CuSi (brazing) with Argon gas, using electrode wires that are suitable for the workpiece to be welded.
• Suitable core wires can also be used without Flux protection gas, adapting torch polarity according to the indications of the wire producer. It is particularly suitable for light metalwork fabrication and in body shops, for welding galvanized plates, high stress stainless steel and aluminium.
• The welding machine can be used for TIG welding in direct current (DC), with arc striking upon contact (LIFT ARC mode). It welds all types of steel (carbon, low- and high-alloy) and heavy metals (copper, nickel, titanium and their alloys) with a gas shield of pure (99.9%) Ar or, for special uses, with an Argon/Helium mix.
• It can also be used for MMA electrode welding in direct current (DC) using coated electrodes (rutile, acid, basic).

Key features

• Microprocessor controlled MIG-MAG/FLUX/BRAZING/MMA/TIG DC-Lift inverter multiprocess welding machine.
• Technomig 180 Dual Synergic is confirmed as the perfect solution for a wide range of applications, from maintenance to installation and interventions in body shops, because of its flexibility and the different materials it can weld (steel, stainless steel, aluminium), or braze weld (galvanized sheet).
• The fast SYNERGIC adjustment of the welding parameters thanks to the "ONE TOUCH" technology, makes the product very easy to use. Just set the material thickness and start welding: the intelligent and automatic control of the arc, moment by moment, maintains high welding performance in all working conditions, with different materials and/or gases.
• The operator can also intervene manually along the arc length: this adjustment means the weld seam can be modified according to the welder's style.
• Can be used with 100 and 200mm reels, max. 5 kg
• Lightweight and very compact, Technomig can be moved around easily in all intervention areas, both indoors and outdoors.
• Polarity reversal for GAS MIG-MAG/BRAZING welding
• Thermostatic, overvoltage, undervoltage, motorgenerator (+/- 15%) protections
• Arc-force adjustment in MMA
• Euro torch connection
• Complete with MIG torch (M15,3m), work clamp and cable

MIG-MAG
- Synergic (automatic) operation.  9 pre-set synergic curves.
- Manual operation (version 220A only)
- Burn-back time based on wire speed
- Thermostatic safeguard: A heat-sensing system that shuts down the machine if the temperature rises too high, preventing overheating.
- Protection against accidental short-circuits caused by contact between torch and earth
- Protection against irregular power supplies (power supply voltage too high or too low)
- Compatible with the engine generator (230V, +/-15%). High stability of the welding current even when the supply voltage fluctuates, so the machine can maintain a consistent welding current even when the supply voltage fluctuates, thereby ensuring continuous, reliable welding performance.
- Polarity reversal (Flux Welding) 

TIG
- Start LIFT: The electric arc is struck by moving the tungsten electrode away from the piece to be welded. This strike mode causes less electrical-radiation disturbance and reduces tungsten inclusions and electrode wear to a minimum.

MMA
- Arc force: This helps maintain a stable arc even in difficult conditions, such as dense welds. With the Arc Force function, the inverter automatically adjusts the current depending on the length of the arc. If the arc accidentally touches the workpiece, the current increases, so it does not stick. If the two are too far apart, the current will be reduced and the arc will not extinguish.
- Hot start: it helps to ignite the arc more easily by automatically increasing the current at the beginning of the welding process. This can be especially useful for difficult-to-ignite electrodes. Facilitates arc ignition for materials that are too cold or too thick.
- Anti-stick: prevents the electrode from sticking to the workpiece, reducing the current connected to the electrode when it detects sticking. This makes it easier to remove the electrode and reduces the risk of overheating.
- Indication of recommended electrode diameter based on welding current

ACCESSORIES
- MIG (MT15, 3m) torch
- Return cable complete with earth clamp

Specifications

• Three phase mains voltage: 230V
• Mains frequency: 50/60Hz
• Current range: 20-170A
• Max. current: 140A@20%
• DC current: 80A
• Max. no load voltage: 44V
• Max. absorbed current: 22A
• Absorbed current at 60%: 11A
• Max. absorbed power: 3,2kW
• Absorbed power at 60%: 1,6kW
• Efficiency: 86%
• Power factor: 0,7
• Usable electrodes in DC: 1,6-3,2mm
• Steel welding wire diameter: 06-0,8mm
• Inox welding wire diameter: 0,8mm
• Aluminium welding wire diameter: 0,8-1mm
• Flux cored welding wire diameter: 0,8-1,2mm
• Brazing wire diameter: 0,8mm
• Protection degree: IP23
• Dimensions: 46x24x36cm
• Weight: 11kg