Special promotions are available! Don't miss out on great deals!
Constant velocity joint tools
Products
7pcs Drive Shaft Puller / Extractor Set
The 7pcs Drive Shaft Puller / Extractor Set is suitable for pulling the half-axle into the wheel hub. In order to be able to carefully and evenly insert the half-axle into the wheel hub, it is necessary to use the appropriate adapters and accessories from the drive-in tool, so that the half-axle goes in securely and straight.
Product code: MG50046
CV boot clamp pliers
Special pliers for installing and tightening CV boot clamps on driveshafts and axle joints.
Product code: MG94126A
CV boot band pliers
For stainless steel CV boot bands. Also for bands, where special torque has to be used, Volkswagen, Audi, Opel, Ford
Product code: MG50111
Cv boot clamp tool with cutter
Cv boot clamp tool with cutter is suitable for installing and tightening tape-type clamps. It has a built-in cutter for cutting tape. With the built-in cutting and winding mechanism, the tape can be pulled and cut quickly and efficiently.
Product code: MG04B1008
CV Clamp Tool and CV Joint Boot Clamp Pliers Set
The 2-piece pliers set for quick and easy tightening and fastening of rubber bell clamps. Ideal for installing half-shaft rubber bells.
Product code: MG04B1007
Pneumatic CV joint boot install tool
This pneumatic CV joint boot install tool makes installation fast and easy. It prevents boot damage and ensures a tight fit. Simply adjust the air control switch and place over the CV joint. Lubricate before use. Working pressure: 5-9bar. Perfect for auto mechanics!
Product code: MG04B1085
CV joint assembly removal tool
Can be used in almost all vehicles. It is suitable for replacing damaged, worn out axle hinges quickly and without any problems.
Product code: MG04B1012
Clamp 15-45mm
This tool is designed to hold, clamp or encircle one or more objects, e.g., cables or pipes.
Product code: JBM11891
Boot clamp set 2pcs
After removing a broken CV boot use these clamps to fasten the new CV boot to the vehicle's axle-shaft. Covers sizes from 15 to 125mm (15 to 45mm and 50 - 125mm).
Product code: JBM52633
CV Boot Air Assembly Tool, 20 - 110 mm
Air-powered CV boot installer with 8 reinforced arms, adjustable from 20 to 110mm, compatible with universal and OEM axle boots. Max. pressure: 8bar.
Product code: BGS-9825
CV joint clamp banding tool
CV joint clamp banding tool is suitable for installation and tightening of band-style clamps on CV joint boots, power steering rack and pinion steering gear boots.
Product code: G01653
Pneumatic CV boot installation tool (8bar)
The CV boot installation tool is to be used solely for the stretching of flexible CV boots onto drive-shaft assemblies of automotive vehicles.
Product code: JBM52994
CV Boot Clamp Pliers, 184mm
CV Boot Clamp Pliers, 184mm 1/2" holes on the handles can be used as keys.
Product code: MG50110
Clamp 50-125mm
This tool is designed to hold, clamp or encircle one or more objects, e.g., cables or pipes.
Product code: JBM11890
CV boot clamp pliers (ear type)
CV boot clamp pliers suitable for Oetiker CV drive shaft boot securing clips. Plier's plate presses a flat on the top of the clip so that it forms the spring loop correctly.
Product code: G01656
CV Boot Tool
CV Boot Tool is allows the convenient and efficient installation of rubber bells on the half-axle of the vehicle.
Product code: MG04B1099
CV Joint boot clamp pliers set, 2pcs
The 2pcs CV joint boot clamps pliers set is a banding tool for fast and simple tensioning and securing of CV boot banding straps. Ideal for installing bellows.
Product code: CKB04121-D
CV boot clamp pliers
The Half Shaft Joint Clamp Pliers is a special tool that can be used for crimping stainless steel strips. The tool comes with an adapter that is 3/8" in size, making it compatible for use with a torque wrench. For smooth operation of the tool, it is recommended to grease the lead screw thread. This will help reduce friction and result in smoother operation.
Product code: CKBA1093
CV joint boot clamp pliers
CV joint boot clamp pliers. Holes of 1/2" on the handles to use as keys. Opening: 0-20mm.