Crankshaft front oil seal puller for Iveco 3.0

Cylinder honing tool. For diameters: 51-177mm

Cylinder honing tool. For diameters: 51-177mm

Product code: CKB04138

Piston ring groove cleaning tool set 4pcs

For the removal of carbon deposits from piston ring grooves. Three six sided wheel cutters cover all standard size piston grooves.

Product code: CKBA1040

Cam belt tension gauge

The timing belt tension indicator can be used to adjust the timing belt movement in ranges of 1daN to 10daN. 

Product code: CKB01597

Universal pulley fan clutch holder

Designed to remove and install fan clutch and rotate or restrain the camshaft pulley. Adjustable jaw spread and interchangeable pins.

Product code: CKB04049

Car stethoscope

The car stethoscope is used for auscultation diagnosis. Eliminates sounds from other points than auscultated. 

Product code: CHS-A1022

Ignition timing lamp

A strobe lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

Product code: CKB04795

Piston ring expander, 120-160mm

Piston ring expander, clamping capacity 120-160mm

Product code: MG50335C

Carburettor testing kit

A kit for testing the fuel pump carburettor and automatic gearboxes. It is used for the synchronization of car and motorcycle carburettors, 2T and 4T. 

Product code: CKB0112

Hand held vacuum pump

Accepts many kinds of adapters to fit most types of vehicles. The body has a switch to control two kinds of pressure conditions. Pressure ranges: positive pressure 0-60psi (1-4inhg) and negative pressure 0-30psi (0 to -1inhg).

Product code: CHS-A998A

Piston ring compressor pliers

Piston ring compressor pliers. Operating range: 110-160mm.

Product code: CKB04082

Engine cylinder honing tool 45-88mm

Has 3 grinding stones and a spring to grant smooth operation. For sleeves with diameters of 45-88mm. Attachable to drills.

Product code: CKB04137

Piston ring compressor tool set

Pliers are used to remove and install piston rings without the risk of damaging the components. Three bladed discs and a tool for cleaning the piston grooves from accumulated carbon deposits. The piston ring tensioning band helps to fit the piston into the cylinder.

Product code: G02623

Head gasket tester kit

Head gasket tester kit. Allows easy diagnosis and quick detection of head gasket failures.

Product code: CKBA4052

Adjustable camshaft pulley holder, length 420mm

For tensioning or loosening the belt pulleys, adjustable opening 12-150mm.

Product code: MG50673

Ribbed belt remover and installer tool set, universal

Ribbed belt remover and installer tool set, for Alfa Romeo, Audi, BMW, Chrysler, Fiat, Ford, Mercedes, Seat, Skoda, Smart, PSA, Volvo, VW

Product code: MG50370

Oxygen sensor socket set

Sizes: 3/8" drive, 22mm, 6-point, 3/8" drive, 22mm, 6-point, dep, 1/2" drive 22mm, 12-point

Product code: MG50627

VW Crankshaft Sealing Flange Removing and Installing Tool (Petrol)

This crankshaft seal installer tool is designed for Volkswagen, Audi, Skoda 16v 1,4, 1,6 engines and it’s also used on Fiat BAG 1,6 engines.

Product code: MG04A1026

VW Crankshaft sealing flange removing and installing tool (diesel)

Specially designed tool to renew crankshaft sealing flange.

Product code: MG04A1028

Universal belt tensioner wrench set

Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm

Product code: MG50635B

Leak tester for cylinder head gasket

CO2 Combustion leak detect. This tool is designed to check for the leaks between combustion and cooling system of water-cooled engines. With 3 adapters.

Product code: JBM53662

Combustion leak tester fluid

Combustion leak tester fluid

Product code: JBM14563

Piston ring compression set

Piston ring service tool set for install piston rings; 3 pcs piston ring plates/compressors; 1 piston ring expander; Piston ring groove cleaner; 3 blades

Product code: JBM53251

Piston ring compressor 3", 53-175mm

3" piston ring compressor. Ø 53/175mm

Product code: JBM52696

Piston ring compressor 6", 60-175mm

6" piston ring compressor. Ø 60-175mm

Product code: JBM52697

Ribbed belt remover and installer tool set, universal

Ribbed belt remover and installer tool set, for Alfa Romeo, Audi, BMW, Chrysler, Fiat, Ford, Mercedes, Seat, Skoda, Smart, PSA, Volvo, VW

Product code: JBM51927

Universal belt tensioner wrench set

Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm

Product code: JBM52832

Vacuum gauge and fuel pump pressure tester set with adapters

Measures vacuum up to 70cmHg and pressure up to 0.7bar. Fittings included for compatibility with most cars.

Product code: G02508

Lambda probe oxygen sensor socket set

Lambda (hot) end cap 22 mm x 50 mm, 1/2" square drive. Vacuum sensor and lambda probe (for low-seated probes) 22 mm x 30 mm, 3/8" square drive.

Product code: CKB02575

Rear crankshaft rear oil seal replacement tool for 3.0 HPI / HDI engines

Rear crankshaft rear oil seal replacement tool for Iveco, Fiat Ducato, Peugeot Boxer, Citroen Jumper 3.0 HPI / HDI engines.

Product code: C05/0202

Crankshaft rear oil seal replacement tool for VW 2.5 TDI engines

Crankshaft rear oil seal replacement tool for VW Crafter 5-cylinder diesel engines 2.5 TDI common rail (2006-2013).

Product code: C05/0084

Crankshaft rear oil seal replacement tool for VW 1.4, 1.6, 2.0 TDI

Crankshaft rear oil seal replacement tool for VW, Seat, Skoda 1.4, 1.6, 2.0 TDI both petrol and diesel engines.

Product code: C05/0069

Crankshaft rear oil simering tool for Iveco, Fiat Ducato 2.3 engines

Gasket replacement tool - Rear crankshaft simering tool for Iveco, Fiat Ducato 2.3

Product code: C05/0216

Key clutch viscotic Volkswagen Crafter 2.5 TDI

Product code: W0404

Puller cushion suspension of the engine and gearbox Volkswagen VW, Audi, Seat, Skoda (1K0 199 868 1K0199867)

Product code: W0521

Viscous clutch wrench Mercedes Sprinter 3.0 V6 CDI

Viscous clutch wrench Mercedes Sprinter 3.0 V6 CDI

Product code: W0228

Face milling cutter for the shaft Fiat min 1.4 16V

Product code: W0699

Key to block unscrewing of the pulley Mercedes-Benz M272 / M273 engine

Product code: W0677

Viscous clutch wrench Mercedes Sprinter 906 218, 318, 418, 518 CDI

Viscous clutch wrench Mercedes Sprinter 906 218, 318, 418, 518 CDI

Product code: W0239

Key viscous clutch Ford Transit 2.3 2.4 3.2 (2001 – 2006)

Product code: W0416

The key to the viscous clutch BMW

Product code: W0676

viscous key Mercedes Sprinter 3.0 V6 CDI - Reinforced, stronger

Product code: W0641

The viscous clutch key Volkswagen LT 2.5 TDI

Product code: W0550

Crankshaft rear oil seal replacement tool for Iveco, Fiat 2.3

Crankshaft rear oil seal (gearbox side) replacement tool for Iveco, Fiat 2.3

Product code: W0438

Wrench for shaft belt pulley unscrewing, BMW diesel E39, E46

Wrench for shaft belt pulley unscrewing, BMW diesel E39, E46

Product code: W0084

Wrench for shaft belt pulley unscrewing, VW, Audi, Volvo

Wrench for shaft belt pulley unscrewing, VW LT, T4, Audi, Volvo, 2.5 TDI, SDI, 2.4 D

Product code: W0085

Wrench for shaft belt pulley unscrewing, BMW diesel

Wrench for shaft belt pulley unscrewing, BMW diesel, E87,E46, E60,,E61,E90,E91

Product code: W0082

Crankshaft rear oil seal replacement tool for Iveco, Fiat, Citroen Peugeot 3.0

Crankshaft rear oil seal replacement tool for Iveco, Fiat, Citroen Peugeot 3.0, 13x12.5 (Corteco, DT, LEMA, Ajusa)

Product code: W0522

Rear crankshaft seal replacement tool for Iveco, Fiat, Citroen, Peugeot 3.0

Rear crankshaft seal replacement tool for Reinz, Erling, Glaser 13.65mm seals

Product code: W0640

Wrench for timing belt tightener, motors of VAG cars

Wrench for timing belt tightener, motors of VAG cars

Product code: W0039

Crankshaft front oil seal puller for Iveco, Fiat 2.3

Crankshaft front oil seal puller for Iveco, Fiat 2.3

Product code: W0437

Universal camshaft pulley locking tool set, hardened

Universal camshaft pulley locking tool set, hardened

Product code: W0132

Wrench for loosening the shaft pulley Land Rover 2.0 TD, Rover 2.0 CDTi

Product code: W0690

Rear crankshaft oil seal replacement tool for Iveco 3.0, Mitsubishi Fuso 3.0 Euro 5

Rear crankshaft oil seal replacement tool for Iveco 3.0, Mitsubishi Fuso 3.0 Euro 5

Product code: W0619

Face mill for crankshaft, VW TDI 1.9 2.5

Face mill for crankshaftshaft for VW TDI 1.9, 2.5 engines

Product code: W0017

Puller (32x1,25) To pull sprocket a chain and the sleeve damper crankshaft in the DKW SB 350, NZ 250, NZ 350, F8 other model

Product code: W426K