Cambelt tension wrench set, 14pcs
Product code: MG04A2305
Brand: Lincos
- Budapest: 174
- Debrecen: 118
Product description
Description
A Cambelt tension wrench set is a tool commonly used in the automotive industry to adjust and maintain timing belt tension. The key contains 13 replaceable adapters, which are suitable for almost all types of vehicles and allow you to precisely adjust the tension of the belt according to the specifications of the manufacturer of the specific vehicle. Cambelt tension wrench set affects the efficiency and durability of a car's engine. If the belt is too loose or too tight, the engine will not run properly and may cause serious damage to the car. Using a Cambelt tension wrench set allows you to precisely adjust the belt and ensure that your car's engine runs efficiently and reliably.
Specifications
- Long curved handle for easy access
- With 13 interchangeable adapters
- 5 Torx: E10, E12, E14, E16, E18
- 8 pcs 12-point: 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm
Product packing
| Pack number | Dimensions | Weight |
|---|---|---|
| 1 | 44 x 27 x 5.6 cm | 2.01 kg |
Delivery fee
| Delivery method | Gross price |
|---|---|
| Pickup in Nagytarcsa | 0,00 € |
| Pickup in Debrecen | 0,00 € |
| DHL Worldwide Express | 82,70 € |
More products in this category
Stretch belt tool set, 2pcs
A universal tool set for installing tension belts on modern vehicles, which does not damage the belt or the pulley.
Product code: MG04A2313
Stud extractor set, 4pcs
This four-piece stud extractor set is a highly efficient tool designed for the quick and easy removal and installation of hard-to-reach studs.
Product code: MG93264
Ignition coil puller tool for VAG engines
The tool is a specifically designed apparatus for the proper extraction of "pencil style" ignition coils from 4 cylinder 1.2, 1.4, 1.8, and 2.0 FSI/TFSI engines used in various VAG models.
Product code: MG97037
Oxygen sensor socket 22mm, 8mm cut-out, 3/8" square drive
This Oxygen Sensor Socket is specifically crafted for the efficient removal and installation of oxygen sensors on vehicles with computer-controlled engines.
Product code: MG92576
Ignition coil puller tool for VAG engines
This Ignition Coil Puller is an indispensable tool designed for the proper removal of "pencil style" ignition coils on various VAG engines. It is specifically tailored for use with 4 cylinder 1.2, 1.4, 1.8, and 2.0 FSI/TFSI engines, making it a versatile tool for a wide range of applications.
Product code: MG96504
Oxygen sensor socket 22mm, 1/2" square drive
This Oxygen Sensor Socket is a specialized tool designed for the removal and installation of oxygen sensors in vehicles equipped with computer-controlled engines. The built-in offset allows for more leverage on the socket in tight spaces by inserting a 1/2-inch square drive tool or breaker bar.
Product code: MG92574
Engine Block Stethoscope
It is indispensable for almost every workshop. It can be used to reveal hidden errors in the engine. Its use is simple and comfortable. During its operation it amplifies noises so their source can be easily determined
Product code: MG04D2021
Oxygen sensor socket 22mm, 3/8" square drive
This Oxygen Sensor Socket is a specialized tool designed for the removal and installation of oxygen sensors in vehicles equipped with computer-controlled engines. The built-in offset allows for more leverage on the socket in tight spaces by inserting a 3/8-inch square drive tool or breaker bar.
Product code: MG92571
Oxygen sensor socket 22mm, 20mm cut-out, 3/8" square drive
This Oxygen Sensor Socket is specifically crafted for the efficient removal and installation of oxygen sensors on vehicles with computer-controlled engines.
Product code: MG92577
Scraper Service Set
Scraper Service Set is a versatile tool kit designed for removing adhesives or paint from glass or metal surfaces.
Product code: MG04C1080
Oxygen sensor socket set
This kit allows quick and damage-free replacement of lambda sensors, which are an important part of exhaust gas treatment systems. Different sizes and types of keys ensure that all lambda probe types are suitable, maximizing flexibility and applicability.
Product code: MG50627
Chain link splitter tool set
Specially curated for chain drives and timing chains, this kit is tailored to handle a range of chains (from 420 to 630) with unparalleled accuracy. Accommodating various pin sizes.
Product code: MG50095
Ignition coils puller set
Ignition coils puller set, VW: Bora, Golf, new Beetle, Passat Polo, Touran, Luppo, Phaeton, Sharan, Tuareg, T5
Product code: MG50144
Torque angle gauge
The torque angle meter is a special tool used to measure the angle of rotation during torque tightening operations.
Product code: MG04J1073
Stretch belt removal and installation tool set, 5pcs
This tool set is designed for the precise removal and installation of elastic or automatic stretching belts found in modern auxiliary propulsion systems, including alternators and servo-steering systems. Suitable for use with a variety of vehicle brands including BMW, Chrysler, Citroen, Ford, Iveco, Mazda, Mercedes, Peugeot, Volvo, and Fiat, among others.
Product code: MG92944
Oxygen sensor wrench with flexible handle, 22mm
This Oxygen Sensor Wrench is designed for the efficient removal and installation of oxygen sensors.
Product code: MG92572
High energy ignition tester
The high energy ignition tester is used to check the strength and consistency of the spark produced by the ignition system. This can help diagnose problems with the system, such as a weak spark or misfire.
Product code: MG04A6011
Lambda probe tester and simulator
The lambda probe tester and simulator tests zirconia and titania lambda sensors and the ECU (engine control unit, which monitors the parts necessary for the proper operation of internal combustion engines for proper performance). Designed to accommodate 1, 2, 3, and 4 wire sensors, both heated and unheated, this versatile device takes your automotive diagnostics to the next level.
Product code: MG04D7015
Ignition adjustment stroboscope lamp
This ignition adjustment stroboscope lamp is an important tool in car repair, especially for diagnosing and repairing problems related to the ignition system. A strobe light can be used to precisely adjust the mechanical or electronic glow system to match engine speed, resulting in greater fuel efficiency and improved performance.
Product code: MG04A6014
Vacuum and pressure gauge
Measuring range (pressure) 0.1bar, 14, 18mm coupling adapter
Product code: MG50190
Leak tester for cylinder head gasket
CO2 Combustion leak detect. This tool is designed to check for the leaks between combustion and cooling system of water-cooled engines. With 3 adapters.
Product code: MG04A4052
Leak tester for cylinder head gasket
CO2 Combustion leak detect. This tool is designed to check for the leaks between combustion and cooling system of water-cooled engines. With 3 adapters.
Product code: JBM53662
Combustion leak tester fluid
Combustion leak tester fluid
Product code: JBM14563
Piston ring groove cleaning tool set, 7 pcs
Quickly and reliably removes soot deposits from the groove. It has easily replaceable blades.
Product code: MG04A1040
Piston ring pliers, 40-100mm
Designed for installing and removing piston rings. The jaws are designed to protect the piston ring from damage.
Product code: MG50335A
Piston ring pliers, 80-120mm
Designed for installing and removing piston rings. The jaws are designed to protect the piston ring from damage.
Product code: MG50335B
Piston ring pliers, 110-160mm
Designed for installing and removing piston rings. The jaws are designed to protect the piston ring from damage.
Product code: MG50335C
Piston ring compressor pliers
Piston ring compressor pliers. Operating range: 110-160mm.
Product code: CKB04082
2“ PISTON RING COMPRESSOR
A piston ring compressor is essential when it comes to engine repair. It can be used to connect the piston with rings, and also helps to secure the piston to the engine body. Allows pistons to be assembled without damaging the piston rings.
Product code: MG04A1049
3” Piston Ring Compressor
A 3" piston ring compressor is essential when it comes to engine repair. It can be used to connect the piston with rings, and also helps to secure the piston to the engine body. Allows pistons to be assembled without damaging the piston rings.
Product code: MG04A1001
4“ Piston Ring Compressor
A 4" piston ring compressor is essential when it comes to engine repair. It can be used to connect the piston with rings, and also helps to secure the piston to the engine body. Allows pistons to be assembled without damaging the piston rings.
Product code: MG04A1042
Piston ring compressor 3", 53-175mm
3" piston ring compressor. Ø 53/175mm
Product code: JBM52696
Piston ring compressor 6", 60-175mm
6" piston ring compressor. Ø 60-175mm
Product code: JBM52697
Piston ring service tool set, 9pcs
This 9-piece piston ring service tool set simplifies engine maintenance, featuring 3 piston compressors, a ring expander, groove cleaner, and a master kit. Fits diameters 53-175mm.
Product code: MG50608
Piston ring compression set
Piston ring service tool set for install piston rings; 3 pcs piston ring plates/compressors; 1 piston ring expander; Piston ring groove cleaner; 3 blades
Product code: JBM53251
Timing belt tension meter
A two-sided scale allows measurements to be made from either side, showing the tension in Nm
Product code: MG50607
Cam belt tension gauge
The timing belt tension indicator can be used to adjust the timing belt movement in ranges of 1daN to 10daN.
Product code: CKB01597
Cambelt tension wrench set, 14pcs
Cambelt tension wrench set with 13 interchangeable adapters, suitable for almost all types of vehicles.
Product code: MG04A2305
Tool for fitting and removing stretch ribbed belts
This tool is a versatile and essential tool for fitting and removing stretch ribbed belts. This specialized tool is designed to simplify the process of working with stretch ribbed belts.
Product code: W0267
Universal belt tensioner wrench set
Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm
Product code: MG50635B
Universal belt tensioner wrench set
Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm
Product code: JBM52832
Universal pulley and fan clutch holder set
This tool kit designed with grooved pins that hold the camshaft pulley firmly in place.
Product code: MG91630
Viscous clutch wrench Mercedes Sprinter 906 218, 318, 418, 518 CDI
Viscous clutch wrench Mercedes Sprinter 906 218, 318, 418, 518 CDI
Product code: W0239
Viscous Clutch Key Ford Transit 2.3 2.4 3.2 (2001 – 2006)
This viscous clutch key is specifically designed for tightening or loosening the viscous clutch on Ford Transit vehicles. It is an ideal tool for precise and efficient maintenance, ensuring the proper functioning of the clutch.
Product code: W0416
Wrench for shaft belt pulley unscrewing, VW, Audi, Volvo
A special tool that can be used to unscrew the axle disc for VW, Audi and Volvo vehicles.
Product code: W0085
Belt pulley wrench for BMW diesel engines
Belt pulley wrench for BMW diesel, E87, E46, E60, E61, E90, E91.
Product code: W0082
Timing belt tightener for VAG car engines
Timing belt tensioner wrench for VAG car engines.
Product code: W0039
Water Pump Pulley Remover VW / AUDI
This tool is specifically designed for the removal of the water pump pulley during the timing belt replacement process.
Product code: W0328
Universal camshaft pulley locking tool set, 4 pairs of bit adapters
Universal camshaft pulley locking tool set, 4 pairs of bit adapters.
Product code: W0238
VW Crankshaft Sealing Flange Removing and Installing Tool (Petrol)
This crankshaft seal installer tool is designed for Volkswagen, Audi, Skoda 16v 1,4, 1,6 engines and it’s also used on Fiat BAG 1,6 engines.
Product code: MG04A1026
Puller (32x1,25) To pull sprocket a chain and the sleeve damper crankshaft in the DKW SB 350, NZ 250, NZ 350, F8 other model
Product code: W426K
Face mill cutter for the shaft Porsche 911 G 2.7, 3.0 and 3.2
This face mill cutter is specifically designed for cutting and preparing Porsche 911 G 2.7, 3.0 and 3.2 engine shafts. Thanks to the M12x1.5 thread size, it fits easily on shafts with the appropriate thread.
Product code: W0672
Face mill for crankshaft, VW TDI 1.9, 2.5
Face mill for the crankshafts of VW TDI 1.9, 2.5 engines.
Product code: W0017
Face mill cutter for Fiat 1.4 16V shafts
This face mill is specially designed for cutting and preparing Fiat 1.4 16V engine shafts. The cutting diameter of the tool is 32 mm, which is the ideal size for machining the front surface of Fiat 1.4 16V engine shafts. Thanks to the M12x1 thread size, it fits easily to shafts with the appropriate thread.