Leak tester for cylinder head gasket
Product code: MG04A4052
Brand: Lincos
- Budapest: 24
- Debrecen: 27
Product description
Description
Thanks to the universal adapter with a wide measuring range (25-55mm), we can check among other things: cars, trucks, road tractors, excavators, motorcycles and forklifts.
The RELD tester is designed to detect damage to the cylinder head and gasket of combustion, liquid-cooled engines (petrol, diesel, LPG). The tester has the same working principle and the same efficiency as expensive testers and its price is affordable thanks to the innovative method of production.
In case of a damaged gasket under the cylinder head or the cylinder head itself, a part of the exhaust gas containing CO2 enters the cooling system. The operating principle of the device is based on measuring the CO2 content. With an increased content of CO2, the liquid reacts with the gas and changes colour. The whole process takes only 5 minutes. Our tester offers almost 100% safety.
Contains
- Test tube
- Bayonet adapter (diameters: 40, 47, 55mm)
- 200ml round bottle
- 250ml square bottle
Adapters
- Small: Suzuki, Toyota, Mitsubishi
- Medium: Suzuki, Toyota, Mitsubishi, Subaru, Peugeot, Nissan, Lexus, Mazda,
- Big: Ford, GM, Mercedes-Benz, Jeep
Product packing
| Pack number | Dimensions | Weight |
|---|---|---|
| 1 | 34.5 x 25 x 8.5 cm | 1.17 kg |
Delivery fee
| Delivery method | Gross price |
|---|---|
| Pickup in Nagytarcsa | 0,00 € |
| Pickup in Debrecen | 0,00 € |
| DHL Worldwide Express | 72,56 € |
Available accessories
Combustion leak tester fluid
Combustion leak tester fluid
Product code: JBM14563
Alternative products
More products in this category
Lambda probe tester and simulator
The lambda probe tester and simulator tests zirconia and titania lambda sensors and the ECU (engine control unit, which monitors the parts necessary for the proper operation of internal combustion engines for proper performance). Designed to accommodate 1, 2, 3, and 4 wire sensors, both heated and unheated, this versatile device takes your automotive diagnostics to the next level.
Product code: MG04D7015
Vacuum and pressure gauge
Measuring range (pressure) 0.1bar, 14, 18mm coupling adapter
Product code: MG50190
Carburetor synchroniser and vacuum/pressure tester, 0-1bar
With this kit you can synchronize the values of up to 4 carburettors and fine tune and adjust them.
Product code: MG50504
Combustion leak tester fluid
Combustion leak tester fluid
Product code: JBM14563
Piston ring compressor pliers
Piston ring compressor pliers. Operating range: 110-160mm.
Product code: CKB04082
Piston ring compressor 3", 53-175mm
3" piston ring compressor. Ø 53/175mm
Product code: JBM52696
Piston ring compressor 6", 60-175mm
6" piston ring compressor. Ø 60-175mm
Product code: JBM52697
Piston ring service tool set, 9pcs
This 9-piece piston ring service tool set simplifies engine maintenance, featuring 3 piston compressors, a ring expander, groove cleaner, and a master kit. Fits diameters 53-175mm.
Product code: MG50608
Cambelt tension wrench set, 14pcs
Cambelt tension wrench set with 13 interchangeable adapters, suitable for almost all types of vehicles.
Product code: MG04A2305
Tool for fitting and removing stretch ribbed belts
This tool is a versatile and essential tool for fitting and removing stretch ribbed belts. This specialized tool is designed to simplify the process of working with stretch ribbed belts.
Product code: W0267
Universal belt tensioner wrench set
Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm
Product code: MG50635B
Universal belt tensioner wrench set
Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm
Product code: JBM52832
Adjustable camshaft pulley holder, length 420mm
For tensioning or loosening the belt pulleys, adjustable opening 12-150mm.
Product code: MG50673
Key to block unscrewing of the pulley Mercedes-Benz M272 / M273 engine
Product code: W0677
Viscous clutch wrench Mercedes Sprinter 906 218, 318, 418, 518 CDI
Viscous clutch wrench Mercedes Sprinter 906 218, 318, 418, 518 CDI
Product code: W0239
Viscous Clutch Key Ford Transit 2.3 2.4 3.2 (2001 – 2006)
This viscous clutch key is specifically designed for tightening or loosening the viscous clutch on Ford Transit vehicles. It is an ideal tool for precise and efficient maintenance, ensuring the proper functioning of the clutch.
Product code: W0416
Wrench for shaft belt pulley unscrewing, VW, Audi, Volvo
A special tool that can be used to unscrew the axle disc for VW, Audi and Volvo vehicles.
Product code: W0085
Belt pulley wrench for BMW diesel engines
Belt pulley wrench for BMW diesel, E87, E46, E60, E61, E90, E91.
Product code: W0082
Timing belt tightener for VAG car engines
Timing belt tensioner wrench for VAG car engines.
Product code: W0039
Water Pump Pulley Remover VW / AUDI
This tool is specifically designed for the removal of the water pump pulley during the timing belt replacement process.
Product code: W0328
Universal camshaft pulley locking tool set, 4 pairs of bit adapters
Universal camshaft pulley locking tool set, 4 pairs of bit adapters.
Product code: W0238
VW Crankshaft Sealing Flange Removing and Installing Tool (Petrol)
This crankshaft seal installer tool is designed for Volkswagen, Audi, Skoda 16v 1,4, 1,6 engines and it’s also used on Fiat BAG 1,6 engines.
Product code: MG04A1026
Crankshaft seal installing tool for VAG (petrol and diesel engines)
Special purpose tool for the precise installation of shim rings/shim ring housings with a speed sensor on the rear (transmission side) side of the crankshaft.
Product code: MG04A1028
Puller (32x1,25) To pull sprocket a chain and the sleeve damper crankshaft in the DKW SB 350, NZ 250, NZ 350, F8 other model
Product code: W426K
Face mill cutter for the shaft Porsche 911 G 2.7, 3.0 and 3.2
This face mill cutter is specifically designed for cutting and preparing Porsche 911 G 2.7, 3.0 and 3.2 engine shafts. Thanks to the M12x1.5 thread size, it fits easily on shafts with the appropriate thread.
Product code: W0672
Face mill for crankshaft, VW TDI 1.9, 2.5
Face mill for the crankshafts of VW TDI 1.9, 2.5 engines.
Product code: W0017
Face mill cutter for Fiat 1.4 16V shafts
This face mill is specially designed for cutting and preparing Fiat 1.4 16V engine shafts. The cutting diameter of the tool is 32 mm, which is the ideal size for machining the front surface of Fiat 1.4 16V engine shafts. Thanks to the M12x1 thread size, it fits easily to shafts with the appropriate thread.