Viscous clutch wrench Mercedes Sprinter 906 218, 318, 418, 518 CDI

3” Piston Ring Compressor

A 3" piston ring compressor is essential when it comes to engine repair. It can be used to connect the piston with rings, and also helps to secure the piston to the engine body. Allows pistons to be assembled without damaging the piston rings.

Product code: MG04A1001

VW Crankshaft Sealing Flange Removing and Installing Tool (Petrol)

This crankshaft seal installer tool is designed for Volkswagen, Audi, Skoda 16v 1,4, 1,6 engines and it’s also used on Fiat BAG 1,6 engines.

Product code: MG04A1026

Piston ring groove cleaning tool set, 7 pcs

Quickly and reliably removes soot deposits from the groove. It has easily replaceable blades.

Product code: MG04A1040

4“ Piston Ring Compressor

A 4" piston ring compressor is essential when it comes to engine repair. It can be used to connect the piston with rings, and also helps to secure the piston to the engine body. Allows pistons to be assembled without damaging the piston rings.

Product code: MG04A1042

2“ PISTON RING COMPRESSOR

A piston ring compressor is essential when it comes to engine repair. It can be used to connect the piston with rings, and also helps to secure the piston to the engine body. Allows pistons to be assembled without damaging the piston rings.

Product code: MG04A1049

Stretch belt tool set, 2pcs

A universal tool set for installing tension belts on modern vehicles, which does not damage the belt or the pulley.

Product code: MG04A2313

Leak tester for cylinder head gasket

CO2 Combustion leak detect. This tool is designed to check for the leaks between combustion and cooling system of water-cooled engines. With 3 adapters.

Product code: MG04A4052

Engine Block Stethoscope

It is indispensable for almost every workshop. It can be used to reveal hidden errors in the engine. Its use is simple and comfortable. During its operation it amplifies noises so their source can be easily determined

Product code: MG04D2021

Ignition coils puller set

Ignition coils puller set, VW: Bora, Golf, new Beetle, Passat Polo, Touran, Luppo, Phaeton, Sharan, Tuareg, T5

Product code: MG50144

Piston ring pliers, 40-100mm

Designed for installing and removing piston rings. The jaws are designed to protect the piston ring from damage.

Product code: MG50335A

Piston ring pliers, 80-120mm

Designed for installing and removing piston rings. The jaws are designed to protect the piston ring from damage.

Product code: MG50335B

Piston ring pliers, 110-160mm

Designed for installing and removing piston rings. The jaws are designed to protect the piston ring from damage.

Product code: MG50335C

Timing belt tension meter

A two-sided scale allows measurements to be made from either side, showing the tension in Nm

Product code: MG50607

Piston ring service tool set, 9pcs

This 9-piece piston ring service tool set simplifies engine maintenance, featuring 3 piston compressors, a ring expander, groove cleaner, and a master kit. Fits diameters 53-175mm.

Product code: MG50608

Engine cylinder bore dial gauge set

Precision bore gauge set for measuring internal diameters from 50mm to 160mm with 0.01mm tolerance. Includes self-centering heads, 12 rods, spacer rings, and a durable case.

Product code: MG90130

Universal pulley and fan clutch holder set

Designed specifically for the removal and installation of fan clutches and the rotation or restraint of camshaft pulleys. Adjustable jaw spread and interchangeable pins. Supplied in storage case.

Product code: MG91620

Universal pulley and fan clutch holder set

This tool kit designed with grooved pins that hold the camshaft pulley firmly in place.

Product code: MG91630

Stretch belt removal and installation tool set, 5pcs

This tool set is designed for the precise removal and installation of elastic or automatic stretching belts found in modern auxiliary propulsion systems, including alternators and servo-steering systems. Suitable for use with a variety of vehicle brands including BMW, Chrysler, Citroen, Ford, Iveco, Mazda, Mercedes, Peugeot, Volvo, and Fiat, among others.

Product code: MG92944

Ignition coil puller tool for VAG engines

This Ignition Coil Puller is an indispensable tool designed for the proper removal of "pencil style" ignition coils on various VAG engines. It is specifically tailored for use with 4 cylinder 1.2, 1.4, 1.8, and 2.0 FSI/TFSI engines, making it a versatile tool for a wide range of applications.

Product code: MG96504

Ignition coil puller tool for VAG engines

The tool is a specifically designed apparatus for the proper extraction of "pencil style" ignition coils from 4 cylinder 1.2, 1.4, 1.8, and 2.0 FSI/TFSI engines used in various VAG models.

Product code: MG97037

Fan clutch remover for BMW

BMW fan viscous clutch remover. Double-sided holding tool with a spacing of 38mm and 44.5mm.

Product code: W0676

Crankshaft front oil seal puller for Iveco 3.0

The crankshaft front oil seal puller is a specialized tool designed to remove the front oil seal without causing damage to the crankshaft or engine components.

Product code: W0434

Viscous clutch wrench Mercedes Sprinter 3.0 V6 CDI

Viscous clutch wrench for Mercedes Sprinter 3.0 V6 CDI, 4.0 V8 CDI, 642 3.0 CDI.

Product code: W0228

Rear crankshaft rear oil seal replacement tool for 3.0 HPI / HDI engines

Rear crankshaft rear oil seal replacement tool for Iveco, Fiat Ducato, Peugeot Boxer, Citroen Jumper 3.0 HPI / HDI engines.

Product code: C05/0202

Crankshaft rear oil seal replacement tool for Iveco, Fiat Ducato 2.3 engines

Replacement tool for crankshaft rear oil seal tool for Iveco, Fiat Ducato 2.3

Product code: C05/0216

High energy ignition tester

The high energy ignition tester is used to check the strength and consistency of the spark produced by the ignition system. This can help diagnose problems with the system, such as a weak spark or misfire.

Product code: MG04A6011

Chain link splitter tool set

Specially curated for chain drives and timing chains, this kit is tailored to handle a range of chains (from 420 to 630) with unparalleled accuracy. Accommodating various pin sizes.

Product code: MG50095

Carburetor synchroniser and vacuum/pressure tester, 0-1bar

With this kit you can synchronize the values of up to 4 carburettors and fine tune and adjust them.

Product code: MG50504

Oxygen sensor socket set

This kit allows quick and damage-free replacement of lambda sensors, which are an important part of exhaust gas treatment systems. Different sizes and types of keys ensure that all lambda probe types are suitable, maximizing flexibility and applicability.

Product code: MG50627

Oxygen sensor socket 22mm, 3/8" square drive

This Oxygen Sensor Socket is a specialized tool designed for the removal and installation of oxygen sensors in vehicles equipped with computer-controlled engines. The built-in offset allows for more leverage on the socket in tight spaces by inserting a 3/8-inch square drive tool or breaker bar.

Product code: MG92571

Oxygen sensor wrench with flexible handle, 22mm

This Oxygen Sensor Wrench is designed for the efficient removal and installation of oxygen sensors.

Product code: MG92572

Oxygen sensor socket 22mm, 1/2" square drive

This Oxygen Sensor Socket is a specialized tool designed for the removal and installation of oxygen sensors in vehicles equipped with computer-controlled engines. The built-in offset allows for more leverage on the socket in tight spaces by inserting a 1/2-inch square drive tool or breaker bar.

Product code: MG92574

Oxygen sensor socket 22mm, 8mm cut-out, 3/8" square drive

This Oxygen Sensor Socket is specifically crafted for the efficient removal and installation of oxygen sensors on vehicles with computer-controlled engines.

Product code: MG92576

Oxygen sensor socket 22mm, 20mm cut-out, 3/8" square drive

This Oxygen Sensor Socket is specifically crafted for the efficient removal and installation of oxygen sensors on vehicles with computer-controlled engines.

Product code: MG92577

Torque angle gauge with magnetic arm

Torque angle gauge with magnetic arm is a special tool used to measure the angle of rotation during torque tightening operations.

Product code: MG04Z0018

Torque angle gauge

The torque angle meter is a special tool used to measure the angle of rotation during torque tightening operations.

Product code: MG04J1073

Diesel injector line socket flexi head wrench set (12-19mm)

Durable, flexible-head wrench set (12-19 mm) for diesel injectors, fuel lines, and hydraulics, with 220° flexibility and extra-long neck for hard-to-reach areas.

Product code: MG93374

Diesel Camshaft Head Rebuild Kit for VAG, Porsche, Audi, Skoda

This kit is allows you to overhaul the camshaft and cylinder head on VAG, Porsche or Audi common rail diesel engines. It holds the camshaft in the correct position when installing it. Equivalent to the OEM tooling required to allow the camshafts to be correctly fitted into the cylinder head. This is necessary as the cylinder heads on these engines are designed with a camshaft retaining frame that splits from the cylinder head along the centre line of the cam bearing caps.

Product code: MG04A1030

Universal timing belt tensioner and remover

The Stretch Belt Mate Kit help install or remove stretch belts. Stretch belts can be difficult to install or remove without the proper tools. Improper installation or removal of a stretch belt can cause damage to the belt or other engine components.

Product code: MG04A2304

Cambelt tension wrench set, 14pcs

Cambelt tension wrench set with 13 interchangeable adapters, suitable for almost all types of vehicles.

Product code: MG04A2305

Lambda probe tester and simulator

The lambda probe tester and simulator tests zirconia and titania lambda sensors and the ECU (engine control unit, which monitors the parts necessary for the proper operation of internal combustion engines for proper performance). Designed to accommodate 1, 2, 3, and 4 wire sensors, both heated and unheated, this versatile device takes your automotive diagnostics to the next level.

Product code: MG04D7015

Vacuum and pressure gauge

Measuring range (pressure) 0.1bar, 14, 18mm coupling adapter

Product code: MG50190

Ribbed belt remover and installer tool set, universal

Effortlessly remove and install ribbed belts with our universal tool set. Includes two tools - one for installation and one for removal. Compatible with Alfa Romeo, Audi, BMW, Chrysler, Fiat, Ford, Mercedes, Seat, Skoda, Smart, PSA, Volvo, VW. Save time and money.

Product code: MG50370

Adjustable camshaft pulley holder, length 420mm

For tensioning or loosening the belt pulleys, adjustable opening 12-150mm.

Product code: MG50673

Universal camshaft bearing tool installation and removal set

Universal camshaft bearing tool set for easy installation and removal of camshaft bearings in various engine types.

Product code: MG91562

Crankshaft seal removing and installing tool for VAG (2.5 diesel engines)

This tool is designed for the precise and safe removal and installation of the crankshaft seal on various VAG 2.5 diesel engines. It is an essential tool for mechanics and technicians working on compatible Volkswagen models, ensuring the correct alignment of the main seal housing and the crankshaft sensor.

Product code: MG97035

Stud extractor set, 4pcs

This four-piece stud extractor set is a highly efficient tool designed for the quick and easy removal and installation of hard-to-reach studs.

Product code: MG93264

Scraper Service Set

Scraper Service Set is a versatile tool kit designed for removing adhesives or paint from glass or metal surfaces.

Product code: MG04C1080

Universal camshaft pulley holding tool, 21-100mm

Universal camshaft pulley holding tool, 21-100mm. For Mercedes Benz, Bmw, Ford, Mitsubishi, Honda, VW, Audi, Nissan, Toyota, Volvo, etc.

Product code: W0132

Viscous clutch key for Mercedes Sprinter 3.0 V6 CDI

The Viscous Clutch Key for Mercedes Sprinter 3.0 V6 CDI engines is a specialized tool designed to remove and install the viscous clutch in the cooling fan assembly. This key provides a secure grip on the clutch, allowing for efficient and safe maintenance or replacement of this critical component.

Product code: W0641

Rear crankshaft oil seal replacement tool for Iveco 3.0, Mitsubishi Fuso 3.0 Euro 5

Rear crankshaft oil seal replacement tool for Iveco 3.0, Mitsubishi Fuso 3.0 Euro 5

Product code: W0619

The viscous clutch key Volkswagen LT 2.5 TDI

The viscous clutch key Volkswagen LT 2.5 TDI is a specialized tool designed to assist in the removal and installation of the viscous clutch unit.

Product code: W0550

Crankshaft rear oil seal replacement tool for Iveco, Fiat, Citroen, Peugeot 3.0

Crankshaft rear oil seal replacement tool for Iveco, Fiat, Citroen, Peugeot 3.0, 13x12.5 (Corteco, DT, LEMA, Ajusa)

Product code: W0522

Front crankshaft oil seal puller for Iveco, Fiat 2.3

This tool is designed to extract the front oil seal safely and efficiently without causing damage to the seal or the crankshaft.

Product code: W0437

Timing belt tightener for VAG car engines

Timing belt tensioner wrench for VAG car engines.

Product code: W0039

BMW crankshaft pulley wrench (E39, E46, E60, E61, E81, E83, E90, E91)

Crankshaft pulley holding tool for BMW 3 and 5 Series. Holds the vibration damper when loosening or tightening the central crankshaft bolt.

Product code: W0084

Mercedes Benz M272 / M273 pulley unscrewing wrench

Pulley unscrewing wrench for Mercedes Benz M272 and M273 engines, designed for easy and precise removal of pulleys on V6 and V8 engines in various Mercedes models from 2004 to 2014.

Product code: W0677

Belt pulley wrench for BMW diesel engines

Belt pulley wrench for BMW diesel, E87, E46, E60, E61, E90, E91.

Product code: W0082

Universal belt tensioner wrench set

Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm

Product code: MG50635B

VAG crankshaft rear oil seal installer tool set

A professional toolset for correctly installing rear crankshaft oil seals on VAG engines (VW/Audi 1.8T, 2.0T, 3.0 V6, 3.2, 4.2L). Includes precision-machined guides and thrust pieces to ensure a damage-free and accurate seal installation.

Product code: MG98545

Car stethoscope

The car stethoscope is used for auscultation diagnosis. Eliminates sounds from other points than auscultated. 

Product code: CHS-A1022

Piston ring compressor pliers

Piston ring compressor pliers. Operating range: 110-160mm.

Product code: CKB04082

Camshaft timing chain tensioner for Audi, VW, Seat

Camshaft timing chain tensioner. For Audi and VW 1.8L Turbo I4, 2.7L Bi-Turbo V6, 2.8L V6 and 4.2L V8 engines.

Product code: CKB10035

Head gasket tester kit

Head gasket tester kit. Allows easy diagnosis and quick detection of head gasket failures.

Product code: CKBA4052

Piston ring compressor 6"x90 to 175mm

Piston ring compressor 6"x90 to 175mm. Allows the assembly of pistons without damaging the piston rings.

Product code: G02622

Piston ring compressor tool set

Pliers are used to remove and install piston rings without the risk of damaging the components. Three bladed discs and a tool for cleaning the piston grooves from accumulated carbon deposits. The piston ring tensioning band helps to fit the piston into the cylinder.

Product code: G02623

Combustion leak tester fluid

Combustion leak tester fluid

Product code: JBM14563

Piston ring compressor 6", 60-175mm

6" piston ring compressor. Ø 60-175mm

Product code: JBM52697

Universal belt tensioner wrench set

Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm

Product code: JBM52832

Piston ring compression set

Piston ring service tool set for install piston rings; 3 pcs piston ring plates/compressors; 1 piston ring expander; Piston ring groove cleaner; 3 blades

Product code: JBM53251

Leak tester for cylinder head gasket

CO2 Combustion leak detect. This tool is designed to check for the leaks between combustion and cooling system of water-cooled engines. With 3 adapters.

Product code: JBM53662

Lambda probe oxygen sensor socket set

Lambda (hot) end cap 22 mm x 50 mm, 1/2" square drive. Vacuum sensor and lambda probe (for low-seated probes) 22 mm x 30 mm, 3/8" square drive.

Product code: CKB02575

Ribbed belt remover and installer tool set, universal

Ribbed belt remover and installer tool set, for Alfa Romeo, Audi, BMW, Chrysler, Fiat, Ford, Mercedes, Seat, Skoda, Smart, PSA, Volvo, VW

Product code: JBM51927

Universal pulley fan clutch holder

Designed to remove and install fan clutch and rotate or restrain the camshaft pulley. Adjustable jaw spread and interchangeable pins.

Product code: CKB04049

Piston ring compressor, 4"x90 - 175mm

Piston ring compressor, 4"x90 - 175mm. Allows the assembly of pistons without damaging the piston rings.

Product code: G02621

Vacuum gauge and fuel pump pressure tester set with adapters

Measures vacuum up to 70cmHg and pressure up to 0.7bar. Fittings included for compatibility with most cars.

Product code: G02508

Crankshaft seal installing tool for VAG (petrol and diesel engines)

Special purpose tool for the precise installation of shim rings/shim ring housings with a speed sensor on the rear (transmission side) side of the crankshaft.

Product code: MG04A1028

Ignition adjustment stroboscope lamp

This ignition adjustment stroboscope lamp is an important tool in car repair, especially for diagnosing and repairing problems related to the ignition system. A strobe light can be used to precisely adjust the mechanical or electronic glow system to match engine speed, resulting in greater fuel efficiency and improved performance.

Product code: MG04A6014

Face mill cutter for Fiat 1.4 16V shafts

This face mill is specially designed for cutting and preparing Fiat 1.4 16V engine shafts. The cutting diameter of the tool is 32 mm, which is the ideal size for machining the front surface of Fiat 1.4 16V engine shafts. Thanks to the M12x1 thread size, it fits easily to shafts with the appropriate thread.

Product code: W0699

Rear crankshaft oil seal replacement tool for Iveco, Fiat, Citroen, Peugeot 3.0

Rear crankshaft oil seal replacement tool for Reinz, Erling, Glaser 13.65mm seals.

Product code: W0640

Crankshaft rear oil seal replacement tool for Iveco, Fiat 2.3

Crankshaft rear oil seal (gearbox side) replacement tool for Iveco, Fiat 2.3

Product code: W0438

Viscous Clutch Key Ford Transit 2.3 2.4 3.2 (2001 – 2006)

This viscous clutch key is specifically designed for tightening or loosening the viscous clutch on Ford Transit vehicles. It is an ideal tool for precise and efficient maintenance, ensuring the proper functioning of the clutch.

Product code: W0416

Viscous clutch key Volkswagen Crafter 2.5 TDI

The Volkswagen Crafter 2.5 TDI viscous clutch wrench is a special tool that helps remove and install the viscous clutch unit. For Volkswagen Crafter models with a TDI common rail engine.

Product code: W0404

Water Pump Pulley Remover VW / AUDI

This tool is specifically designed for the removal of the water pump pulley during the timing belt replacement process.

Product code: W0328

Tool for fitting and removing stretch ribbed belts

This tool is a versatile and essential tool for fitting and removing stretch ribbed belts. This specialized tool is designed to simplify the process of working with stretch ribbed belts.

Product code: W0267

Face mill for crankshaft, VW TDI 1.9, 2.5

Face mill for the crankshafts of VW TDI 1.9, 2.5 engines.

Product code: W0017

Universal camshaft pulley locking tool set, 4 pairs of bit adapters

Universal camshaft pulley locking tool set, 4 pairs of bit adapters.

Product code: W0238

Puller (32x1,25) To pull sprocket a chain and the sleeve damper crankshaft in the DKW SB 350, NZ 250, NZ 350, F8 other model

Product code: W426K

Crankshaft rear oil seal replacement tool for VW 1.4, 1.6, 2.0 TDI

Crankshaft rear oil seal replacement tool for VW, Seat, Skoda 1.4, 1.6, 2.0 TDI both petrol and diesel engines.

Product code: C05/0069

Face mill for VW, Seat, Skoda 1.9, 2.0, 2.4, 2.5, 3.3 V5, V6, V8 TDI, 5 guide pins

Face mill for VW, Seat, Skoda 1.9, 2.0, 2.4, 2.5, 3.3, V5, V6, V8, TDI injector seats. Includes 5 guide pins.

Product code: W0630

Variator wrench Audi A6 , A7 , A8 - 4.0 L TFSI

Variator wrench for Audi A6, A7, and A8 4.0L TFSI engines, designed for timing chain tensioning and precise adjustments during maintenance.

Product code: W0673

Face mill cutter for the shaft Porsche 911 G 2.7, 3.0 and 3.2

This face mill cutter is specifically designed for cutting and preparing Porsche 911 G 2.7, 3.0 and 3.2 engine shafts. Thanks to the M12x1.5 thread size, it fits easily on shafts with the appropriate thread.

Product code: W0672

Wrench for shaft belt pulley unscrewing, VW, Audi, Volvo

A special tool that can be used to unscrew the axle disc for VW, Audi and Volvo vehicles.

Product code: W0085

Wrench for loosening the shaft pulley Land Rover 2.0 TD, Rover 2.0 CDTi

The Wrench for loosening the shaft pulley is a specialized tool designed specifically for Land Rover 2.0 TD and Rover 2.0 CDTi engines.

Product code: W0690

Crankshaft rear oil seal replacement tool for VW 2.5 TDI engines

Crankshaft rear oil seal replacement tool for VW Crafter 5-cylinder diesel engines 2.5 TDI common rail (2006-2013).

Product code: C05/0084

Carburettor jet cleaning tool set, 16pcs

16-piece tool set for cleaning carburetor jets and welding nozzles, with brushes, needles, files, and storage box.

Product code: BGS-74438

V-ribbed belt tool set, 5pcs

5-piece tool set for mounting and dismounting stretchfit V-ribbed belts without tensioners, fits various pulley sizes.

Product code: BGS-70109

Exhaust gas temperature sensor special socket set (EGT / NOx), 6pcs

6-piece EGT/NOx sensor socket set, 13–17mm sizes in straight and offset design, for cars, vans, and trucks.

Product code: BGS-6678

Ignition coil extractor set for VAG, 8pcs

8-piece VAG ignition coil extractor set for removing coils, connectors, and oil drain plugs; compatible with VW, Audi, Seat, Skoda engines.

Product code: BGS-70326

Ignition coil extractor set for VAG, 4pcs

4-piece extractor set for VAG ignition coils, includes OEM-type tools T10094A, T10095A, T10166, and T40039 for safe removal on various engines.

Product code: BGS-68340

Spark plug socket set hexagon, 12.5mm (1/2") drive, 14–21mm, 5pcs

5-piece spark plug socket set, 1/2" drive, sizes 14–21mm, includes rubber inlays and thin-walled socket for tight spaces.

Product code: BGS-6641

Tool tray 1/6: face hole nut wrench for truck rear axles

Adjustable face hole nut wrench for truck rear axles, includes 3 pin pairs and 50–100mm spigot range.

Product code: BGS-74338

Tensioner Pulley Wrench Set, 12-point, special Shape, 13 - 19 mm, 5 pcs.

5-piece 12-point tensioner pulley wrench set, 13–19mm, chrome plated Cr-V steel, 460mm long, 2270g.

Product code: BGS-1314

Cam belt tension gauge

The timing belt tension indicator can be used to adjust the timing belt movement in ranges of 1daN to 10daN. 

Product code: CKB01597

Slide hammer oil seals extractor

Slide hammer tool for extracting hydraulic steering rack control valve oil seals, preventing pinion damage during power steering system repairs. Manufactured by MSG Equipment.

Product code: MS00005

Piston Ring Compressor Set

Complete tool set for piston ring cleaning, assembly, and compression. Includes tension bands, cleaner, pliers, and screwdriver.

Product code: BGS-1890

Ignition timing lamp

A strobe lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines. 

Product code: CKB04795

Piston ring groove cleaning tool set 4pcs

For the removal of carbon deposits from piston ring grooves. Three six sided wheel cutters cover all standard size piston grooves.

Product code: CKBA1040

Piston ring compressor, 3"x125

Piston ring compressor, 3"x125. Allows the assembly of pistons without damaging the piston rings.

Product code: G02620

Piston ring compressor 3", 53-175mm

3" piston ring compressor. Ø 53/175mm

Product code: JBM52696

Carburettor testing kit

A kit for testing the fuel pump carburettor and automatic gearboxes. It is used for the synchronization of car and motorcycle carburettors, 2T and 4T. 

Product code: CKB0112