Special promotions are available! Don't miss out on great deals!

Car exhaust system

Tools and machines for servicing car exhaust system

Products

Exhaust pipe and tailpipe cutter

Exhaust pipe and tailpipe cutter

This is designed for precision cutting of exhaust pipes and both steel and copper tubing. This versatile cutter is an essential item for automotive repair, maintenance tasks, and custom exhaust system creation.

Product code: MG97577

Discount: 35% (until 30/09/2025)
Gross price: 18,91 € 12,29 €
You save: 6,62 €
🟢 In stock
Oxygen sensor wrench with flexible handle, 22mm

Oxygen sensor wrench with flexible handle, 22mm

This Oxygen Sensor Wrench is designed for the efficient removal and installation of oxygen sensors.

Product code: MG92572

Discount: 10% (until 30/09/2025)
Gross price: 9,64 € 8,67 €
You save: 0,97 €
🟢 In stock
Lambda probe tester and simulator

Lambda probe tester and simulator

The lambda probe tester and simulator tests zirconia and titania lambda sensors and the ECU (engine control unit, which monitors the parts necessary for the proper operation of internal combustion engines for proper performance). Designed to accommodate 1, 2, 3, and 4 wire sensors, both heated and unheated, this versatile device takes your automotive diagnostics to the next level.

Product code: MG04D7015

Gross price: 74,80 €
🟢 In stock
Exhaust backpressure test kit

Exhaust backpressure test kit

The tool allows auto mechanics and vehicle owners to easily check that the exhaust system is working properly and that there are no issues with exhaust backpressure.

Product code: MG04A2167

Gross price: 22,97 €
🟢 In stock
Exhaust pipe rubber ring mounting tool set, 2pcs

Exhaust pipe rubber ring mounting tool set, 2pcs

Two T-handle tools allow for easy installation of exhaust assemblies. The product consists of 1 piece with a straight end and 1 piece with a hook end to fit the block and ring holders.

Product code: MG04A2086

Gross price: 4,18 €
🟢 In stock
Citroen, Peugeot exhaust pipe clamp remover

Citroen, Peugeot exhaust pipe clamp remover

Especially for removing and installing Citroen, Peugeot, Renault exhaust clamps.

Product code: MG50485

Gross price: 8,62 €
🟢 In stock
Exhaust Hanger Removal Pliers

Exhaust Hanger Removal Pliers

Removal pliers are a special tool that allows you to easily and safely remove and reassemble the exhaust system without damaging the connections or seals. It enables easy, quick and one-handed use when removing the rubber strap.

Product code: MG04A2301

Gross price: 8,62 €
🟢 In stock
Exhaust spring clamp remover

Exhaust spring clamp remover

An exhaust spring clamp remover is required for the professional and safe installation of the spring. Used to remove and install fasteners. Made of high quality steel. Can be used with a 17 mm socket or wrench.

Product code: MG04A2087

Gross price: 7,99 €
🟢 In stock
Universal Tail Pipe Cutter Exhaust Pipe Cutting Wrench

Universal Tail Pipe Cutter Exhaust Pipe Cutting Wrench

Wrench designed for cutting steel exhaust pipes, but can also be used to cut copper steel pipes, PVC, etc. The Universal Exhaust Pipe Cutter is the best tool for exhaust system repair and maintenance. Easy to use and versatile to adapt to any exhaust pipe.

Product code: CKB07414

Gross price: 21,58 €
🟢 In stock
Exhaust pipe expander, 29-44, 38-62, 54-87mm

Exhaust pipe expander, 29-44, 38-62, 54-87mm

A spacer is used to expand a length of pipe in equal proportions so that the pipe has the same diameter and is not tapered. It provides a perfect fit without leakage and removes dents and pinch marks.

Product code: MG50076

Gross price: 23,10 €
🟢 In stock
Oxygen sensor socket 22mm, 8mm cut-out, 3/8" square drive

Oxygen sensor socket 22mm, 8mm cut-out, 3/8" square drive

This Oxygen Sensor Socket is specifically crafted for the efficient removal and installation of oxygen sensors on vehicles with computer-controlled engines.

Product code: MG92576

Gross price: 4,00 €
🟢 In stock
Oxygen sensor thread chasers, 2pcs

Oxygen sensor thread chasers, 2pcs

The Oxygen sensor thread chasers comes with tools that allow you to repair a damaged or damaged lambda sensor thread instead of having to replace the entire lambda sensor.

Product code: MG04A6021

Gross price: 3,43 €
🟢 In stock
Spark plug and lambda probe thread repair kit

Spark plug and lambda probe thread repair kit

Spark plug and lambda probe thread repair kit is suitable for deaning corrosion and carbon build-up from spark plug / sensor threads.

Product code: MG04A6020

Gross price: 3,43 €
🟢 In stock
Spark/Glow plug and oxygen sensor master service set, 11pcs

Spark/Glow plug and oxygen sensor master service set, 11pcs

Forged Chrome Vanadium master service set for the professional. Includes all the sockets and extensions required to remove/install sprak/glow plugs and oxygen sensors on most modern vehicles.

Product code: MG92585

Gross price: 27,17 €
🟢 In stock
Oxygen sensor socket set

Oxygen sensor socket set

This kit allows quick and damage-free replacement of lambda sensors, which are an important part of exhaust gas treatment systems. Different sizes and types of keys ensure that all lambda probe types are suitable, maximizing flexibility and applicability.

Product code: MG50627

Gross price: 14,97 €
🟢 In stock
Oxygen sensor socket 22mm, 20mm cut-out, 3/8" square drive

Oxygen sensor socket 22mm, 20mm cut-out, 3/8" square drive

This Oxygen Sensor Socket is specifically crafted for the efficient removal and installation of oxygen sensors on vehicles with computer-controlled engines.

Product code: MG92577

Gross price: 4,00 €
🟢 In stock
Oxygen sensor socket 22mm, 1/2" square drive

Oxygen sensor socket 22mm, 1/2" square drive

This Oxygen Sensor Socket is a specialized tool designed for the removal and installation of oxygen sensors in vehicles equipped with computer-controlled engines. The built-in offset allows for more leverage on the socket in tight spaces by inserting a 1/2-inch square drive tool or breaker bar.

Product code: MG92574

Gross price: 3,43 €
🟢 In stock
Offset oxygen sensor socket. Diameter: 22mm, Drive: 3/8" square

Offset oxygen sensor socket. Diameter: 22mm, Drive: 3/8" square

Common 6 point, 7/8 in (22mm) socket, suitable for most oxygen sensors.

Product code: G02686

Gross price: 4,98 €
🟢 In stock
Oxygen sensor socket 22mm, 3/8" square drive

Oxygen sensor socket 22mm, 3/8" square drive

This Oxygen Sensor Socket is a specialized tool designed for the removal and installation of oxygen sensors in vehicles equipped with computer-controlled engines. The built-in offset allows for more leverage on the socket in tight spaces by inserting a 3/8-inch square drive tool or breaker bar.

Product code: MG92571

Gross price: 2,86 €
🟢 In stock
Set of lambda probe oxygen sensor, vacuum switch remover

Set of lambda probe oxygen sensor, vacuum switch remover

Professional set of lambda probe caps 7 pcs. 1/2", 3/8" x 22, 27, 29 mm. Suitable for removing and installing oxygen sensors, oil pressure switches, oil pressure sending units, thermal sensor switches, vacuum switches and break light switches.

Product code: CKB04042

Gross price: 33,45 €
🟢 In stock
Show more products
This site uses cookies to offer you a better browsing experience. Find out more on how we use cookies. If you continue to use this site without explicit acceptance, we will assume that you accept only essential cookies.