Groove nut socket external tooth KM7
Product code: BGS-8337-7
Brand: BGS
Product description
The groove nut socket external tooth KM7 is designed for reliable loosening and tightening of grooved nuts in compliance with DIN 981. Perfect for use on shafts, clamping sleeves, and pulling sleeves, it ensures accurate alignment and firm engagement.
Made of durable chrome vanadium steel, it combines strength with long-term performance. The internal square drive measures 12.5mm (1/2"), and the tool includes 4 positioning studs to securely interface with KM7 grooved nuts.
Key features
-
Drive profile: Internal square
-
Drive size: 12.5mm / 1/2"
-
Number of studs: 4
-
Standard: DIN 981
-
Material: Chrome vanadium steel
-
Gross weight: 348g
This socket provides dependable grip and efficiency, even under demanding operating conditions.
Product packing
| Pack number | Dimensions | Weight |
|---|---|---|
| 1 | 7.2 x 7 x 6.1 cm | 0.35 kg |
Delivery fee
| Delivery method | Gross price |
|---|---|
| Pickup in Nagytarcsa | 0,00 € |
| Pickup in Debrecen | 0,00 € |
| DHL Worldwide Express | 61,67 € |
More products in this category
Lock nut socket wrench, KM3
Outer diameter: 32mm, inner diameter: 25mm, teeth: 3.6mm, length 45mm.
Product code: W0718
Front hub nut wrench for Iveco Daily (2004-2019)
Front hub nut wrench for Iveco Daily (2004-2019).
Product code: W0354
Impact bit set, 9pcs
A 9-piece impact bit set designed for both manual and impact wrenches, featuring Spline (Ribe) bits from T20 to T70, compatible with 1/2" drives.
Product code: MG93360
1/2" Special socket wrench set for passenger cars
A versatile 1/2" drive socket set, featuring 6-point, 3-point, 10-point, and pentagon sockets for a variety of automotive tasks, including Toyota idler gear fixings, Nissan and Renault clutches, Honda Civic control arms, and more.
Product code: MG93289
Lock nut wrench for KM16 locknuts
Lock nut wrench for KM16 locknuts. O.D.: 109mm. I.D.: 97.6mm.
Product code: W0624
Lock nut socket wrench, grooved, KM7
Lock nut socket wrench, grooved, KM7.
Product code: W0545
Socket wrench for lock nuts, KM14
Designed for safe and easy tightening and loosening of lock nuts.
Product code: W0694
Socket / Wrench For grooved bearing nuts KM 13 ; teeth from the inside
This socket wrench is tailored to fit grooved bearing nuts of KM 13 type. It has teeth on the inside to ensure a snug grip on the bearing nut, allowing for efficient loosening and tightening.
Product code: W0727
Lock nut socket wrench, KM17
Designed for safe and easy tightening and loosening of lock nuts.
Product code: W0700
Wheel hub socket wrench Mercedes, inner diam.: 55mm
Wheel hub socket wrench Mercedes, inner diam.: 55mm.
Product code: W0146
Wheel lock nut removal impact socket set, 9pcs
Easily remove locking wheel nuts with this 9-piece impact socket set. Durable and versatile, it fits 19-22mm sizes, perfect for common needs.
Product code: MG91321
Service wrench for initial chamber 1/2", 60mm
Service wrench for initial chamber 1/2", 60mm
Product code: W0081
The key to loosening the nut of crankshaft bearings for motorcycles DKW SB other models
Product code: W425K
Rocker arm nut wrench for Citroen, Peugeot
Rocker arm nut wrench for Citroen XM, Xantia X1i, X2, C5 I / II , Peugeot 405 I / II ,406 ,605 ,607 cars.
Product code: W0194
Lock nut wrench for KM 15 locknuts, teeth from the inside
This is a professional quality tool specially designed and developed for easy and efficient tightening or loosening of KM15 size lock nuts. O.D.: 108mm. I.D.: 90.5mm. Teeth from the inside.
Product code: W0743
Windscreen nozzle adjusting tool Opel Astra J, Insignia, Cascada, Zafira
Designed specifically for the unique washer jets fitted to vauxhall/opel vehicles. Ideal for adjusting stuck windscreen nozzles. With four gripping claws and angled profile.
Product code: W0638
Wrench for wheel bearing nut, rear axle, Mercedes Sprinter, VW LT
A tool designed for the removal and installation of rear axle wheel bearing nuts.
Product code: W0236
Key/Socket for KM Bearing Nut, 16 Internal Teeth
Socket for KM 16 bearing nut, 16 inner teeth, 117.5mm outer Ø, 98mm inner Ø, 87mm total length.
Product code: W0746
Socket for loosening the crankshaft nut crankshaft and camshaft attacker SCANIA M44x1.5 mm
Crafted with precision and durability in mind, this socket is engineered to provide a secure grip on the crankshaft nut and camshaft attacker of SCANIA engines with M44x1.5 mm specifications. With its perfect fit and robust construction, it ensures efficient and reliable loosening.
Product code: W0646
Socket wrench for KM10 lock nuts, 78.5mm
Socket wrench for KM10 lock nuts, 78.5mm, hexagonal drive
Product code: W0507
Key / nut for the bearing nut KM 4 , studs internal
Tempered key/nut for bearing nut KM4 with internal studs, 43mm outer diameter, 28.3mm inner diameter.
Product code: W0570
Nut cap for Goldhofer THP/SL4 trailer; 6 teeth, teeth inside
The Nut Cap with 6 internal teeth and a tooth distance of 107 mm is a specialized component used in Goldhofer THP/SL4 semi-trailers to secure and maintain critical parts of the trailer's assembly.
Product code: W0726
Bearing nut socket wrench, KM 12, internal pins
Bearing nut socket wrench with internal pins. For KM12 M60 x 2 nuts.
Product code: W0510
The key to the lock nut KM9
The socket wrench is designed for safe and easy tightening and loosening of bearing nuts.
Product code: W0472
Key / nut for the bearing nut KM 9 , studs internal
This wrench is specifically designed to fit the KM 9 groove nut with teeth on the inside.
Product code: W0564
Key / nut for the bearing nut KM 12
This tool provides a secure fit and facilitates proper tightening or loosening of locknuts during bearing installation or removal processes. The key is made using hardened, high-quality materials, ensuring durability and strength, so it can withstand the forces that occur when working with bearings and lock nuts.
Product code: W0513
Socket / Wrench For lock nuts, KM 18
The socket wrench is designed for safe and easy tightening and loosening of lock nuts.
Product code: W0722
Cap / key of the bearing grooves 8 hp; 58mm
This cap/key is designed for bearings with 8 grooves and a diameter of 58mm. It is constructed using high-grade materials, ensuring durability and reliability during use. The purpose of the Bearing Groove Cap/Key is to provide a secure fit over the bearing, allowing for easy installation, removal, or adjustment.
Product code: W0544
Socket/Wrench For bearing nuts KMT 19 (6 teeth)
It is specifically made to handle the demanding requirements of low loader trailers. The socket/wrench is hardened to ensure durability and withstand the high torque needed to tighten or loosen bearing nuts. It is made of high quality material for strength and reliability.
Product code: W0644
Adapter to remove the pins down on the Renault Master 2006
Adapter to remove the pins down on the Renault Master 2006
Product code: W0160
Steering Knuckle Nut Wrench for Mercedes Actros, Axor, Antos, Arocs
This wrench is designed for unscrewing the steering knuckle nut of specific Mercedes trucks. It offers a precise fit and is compatible with both OEM and certain aftermarket parts.
Product code: W0735
Shaft puller for manual gearbox, Fiat Ducato 2.8 JTD
Shaft puller for manual gearbox, Fiat Ducato 2.8 JTD
Product code: W0253
Key to loosening the rear hub nuts M55X1,5 Mercedes Sprinter, VW Crafter after 2006 (hardened)
Key to loosening the rear hub nuts is designed to fit the specific dimensions of the hub nut and provide the necessary grip and torque for loosening it.
Product code: W0403
Socket for removing rear axle nut in Mercedes Vario
Socket for removing rear axle nut in Mercedes Vario.
Product code: C01/0164
Groove nut socket external tooth KM6
Socket for KM6 grooved nuts, 12.5mm (1/2") drive, 4 studs, DIN 981 compliant, chrome vanadium steel.
Product code: BGS-8337-6
Groove nut socket external tooth KM9
Socket for KM9 grooved nuts, 20mm (3/4") drive, 4 studs, DIN 981 compliant, chrome vanadium steel.
Product code: BGS-8337-9
Groove nut socket external tooth KM8
Socket for KM8 grooved nuts, 12.5mm (1/2") drive, 4 studs, DIN 981 compliant, chrome vanadium steel.
Product code: BGS-8337-8
Groove nut socket external tooth KM7
Socket for KM7 grooved nuts, 12.5mm (1/2") drive, 4 studs, DIN 981 compliant, chrome vanadium steel.
Product code: BGS-8337-7
Groove nut socket external tooth KM4
Socket for KM4 grooved nuts, 12.5mm (1/2") drive, 4 studs, DIN 981 compliant, chrome vanadium steel.
Product code: BGS-8337-4
Groove nut socket external tooth KM5
Socket for KM5 grooved nuts, 12.5mm (1/2") drive, 4 studs, DIN 981 compliant, chrome vanadium steel.
Product code: BGS-8337-5
Groove nut socket external tooth KM10
Socket for KM10 grooved nuts, 20mm (3/4") drive, 4 studs, DIN 981 compliant, chrome vanadium steel.
Product code: BGS-8337-10
Groove nut socket external tooth KM11
Socket for KM11 grooved nuts, 20mm (3/4") drive, 4 studs, DIN 981 compliant, chrome vanadium steel.
Product code: BGS-8337-11
Oxygen Sensor Socket Set, 7 pcs.
7-piece oxygen sensor socket set for sensors, switches, and diesel nozzles, multiple drives and profiles, 2202g.
Product code: BGS-1140
Oxygen Sensor Socket Set, 14 pcs.
14-piece oxygen sensor socket set, multiple sizes and drives for a wide range of vehicle brands, 4080g.
Product code: BGS-1149
Groove nut socket external tooth KM12
Socket for KM12 grooved nuts, 20mm (3/4") drive, 4 studs, DIN 981 compliant, chrome vanadium steel.
Product code: BGS-8337-12
Rim Lock Dismantling Tool Set, 10pcs
10-piece set for removing most rim locks without damaging the wheel. Made of high-strength steel.
Product code: BGS-8656
Steering Rack Side Nut Wrench for Lexus and Toyota models
Specialized nut socket for easy installation, removal, and adjustment of steering rack side tightening nuts, ensuring damage-free and precise repairs. Compatible with select Toyota models. Manufactured by MSG Equipment.
Product code: MS00007
Steering Rack Side Nut Wrench for Dodge, Mercedes-Benz, VW
This specialized nut socket is designed for efficient mounting, dismounting, and adjustment of steering rack side tightening nuts. Manufactured by MSG Equipment, it ensures safe and damage-free handling during steering system maintenance and repair.
Product code: MS00010
Steering Rack Side Nut Wrench for Citroen and Peugeot models
Specialized nut socket for easy installation, removal, and adjustment of steering rack side tightening nuts, ensuring damage-free and precise repairs. Compatible with select Citroen and Peugeot models. Manufactured by MSG Equipment.
Product code: MS00008
Steering Rack Bearing Bushing Nut Socket for Hyundai Tucson, KIA Sportage
Specialized nut socket for installing and removing the bearing bushing of the steering rack. Designed for hydraulic steering rack repairs, ensuring precise disassembly and assembly of the support sleeve.
Product code: MS00071
Steering rack bearing bushing crown socket for Great Wall Hover and Opel Frontera
Specialized nut socket for installing and removing the bearing bushing of the steering rack. Designed for hydraulic steering rack repairs, ensuring precise disassembly and assembly while preserving the part’s integrity.
Product code: MS00073
Steering Rack Bearing Bushing Nut Socket for Chevrolet Aveo
Specialized nut socket for the installation and removal of the steering rack bearing bushing. Designed for hydraulic steering rack repairs, ensuring safe disassembly and reassembly of the support sleeve.
Product code: MS00077
Steering rack bushing tool for Seat and VW models
This specialized wrench is an essential tool for hydraulic steering rack repairs. It simplifies the disassembly and assembly of the support sleeve, ensuring the part remains intact and undamaged for future use.
Product code: MS00078
Specialized nut socket for installation/removal of bearing bushing of steering rack
A specialized nut socket designed for the precise installation and removal of support bushings in hydraulic steering racks, ensuring component integrity during maintenance.
Product code: MS00068
Specialized nut socket for installation/removal of bearing bushing of steering rack
A specialized nut socket designed for the installation and removal of the bearing bushing in hydraulic steering racks. Ensures safe disassembly and reassembly, preserving the part for future use. Compatible with CHERY TIGGO 2005 and newer models.
Product code: MS00067
Brake Caliper Socket Set, 11, pcs
11-piece socket set for brake caliper disassembly during brake pad replacement. Compatible with multiple car brands.