Waste oil heater, 8-30kW, black

Description

This device combines medium and high power furnaces thanks to a wide range of operation. A high-precision, low-speed gear fuel pump, specially designed for our devices, taking into account the specific conditions of use, pumps any type of oil, regardless of its density. Thanks to this, you do not have to check the density of the oil at your disposal and you do not have to remember to select the appropriate operating mode - the pump installed in our devices pumps both thick used oils and thinner heating oils and their mixtures.

Main features

• Combustion chamber: The combustion chamber is made of stainless steel, while the fire bowl is made of cast iron, not of rapidly cooling steel.
• Fuel filler: The fuel filler is designed in such a way as to easily and quickly add fuel, without fear that we will flood the controller or larger contaminants will get into the tank. The easy-to-remove filter allows you to clean it quickly and efficiently.
• Overflow protection: New, improved system to prevent oil overflow in the combustion chamber, thanks to a more sensitive micro-switch.
• Automation: Improved device electronics. Now you do not have to wonder what voltage you have in the network, because in our latest controller we have used a voltage stabilization system. Over-voltage protection increases the service life of the controller. This product is equipped with an adjustment knob and an On / Off button.
• High thermal efficiency: This heater effectively heats rooms up to 800m³ (with good insulation of the building).
• Type of fuels that can be used: 
  • vegetable oils (biofuels)
  • raw vegetable oils (rapeseed, sunflower and others), including post-frying (gastronomy)
  • mineral oils (used engine, gear, hydraulic and diesel oils of HBO I, II, III type with a viscosity not higher than SAE80)
  • heating oil

Specifications

• 3-stage power regulation - 8kW, 19kW, 30kW
• Oil consumption from 0.8 to 3 L/h
• Air flow 1460 m3/h (Blowing in 1460 m3 / h of warm air)
• Rated current 0,44A
• Electric supply 230V/50Hz
• Power consumption 100W
• The diameter of the flue 130mm
• Dimensions W x D x Height 540 x 920 x 1350mm
• Weight 50kg
• Tank capacity 25L
• Heater overheating protection
• Protection against overflow of the furnace
• Simple and failure-free controller
• Fuel tank covered with a powder coating
• The combustion chamber is made of steel with increased temperature resistance
• Manual ignition
• Warm air exhaust to the sides
• Maximum temperature of hot air outlet 50-70 degrees C (at air temperature inside the room about 12 degrees C)
• Black color