The key to the BMW N54 differential nut

Fuel Tank Sender Wrench

Universal fuel tank cap wrench, which can be adjusted between 89mm-170mm, so it is a suitable choice for many types of cars. With 15mm drive.

Product code: MG04A3067

Puller arm forward bushing Renault Laguna I (under a hydraulic press)

Puller arm forward bushing Renault Laguna I (under a hydraulic press) (nr. oe 77 00 822 503)

Product code: W0170

Puller arm forward bushing Renault Laguna I

Puller arm forward bushing Renault Laguna I (nr. oe 77 00 824 042)

Product code: W0171

Rear beam bushing puller BMW E32 / E34 (nr. oe 3331112670)

When working on a BMW 5 Sedan (E34), BMW 5 Touring (E34) or BMW 7 (E32), the rear suspension bushing puller makes it easy to remove the bushings from the suspension. This tool provides the proper grip and power transfer to easily and safely remove bushings from the suspension.

Product code: W0181

Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot

Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot

Product code: W0195

Wrench for the injection pump of diesel Mercedes Benz engines

Key for MRSF-ERE injection pumps found in Benz diesel engines.

Product code: W0324

Injection pump lock for Mercedes Benz diesel engines

Injection pump lock for Mercedes Benz diesel engines. OE: 601, 602, 603, 605, 606, 617.

Product code: W0367

Puller for wheel hub / bearing with and without Abs - Ford Mondeo, Focus, C-Max, Mazda 3, Volvo C30 C70 S40 V50

Product code: W0359

Front control arm bushing puller Renault Laguna II, Trafic II

Front control arm bushing puller Renault Laguna II, Trafic II. Renault silent OE: 8200000512.

Product code: W0368

Rear beam sleeve puller Opel Zafira A; Astra G ; Combo ; Meriva A (oe number 402644)

This rear beam sleeve puller is designed to assist installing and removing bushings directly on the vehicle. Built to be compatible with various Opel models, it provides a tight fit and smooth operation, eliminating potential damage to the bushing or vehicle.

Product code: W0371

Timing lock set for Ford 2.0 EcoBoost SCTi and Ti-VCT, 2010 and on

Timing lock set for Ford 2.0 EcoBoost SCTi and Ti-VCT petrol engines. Manufactured 2010 and onwards.

Product code: W0375

Puller sleeve rear beam Renault Megane II; Scenic II; Grand Scenic II (oe sleeve 7701479190)

The Puller sleeve rear beam is a specialized tool to assist in the assembly and disassembly of rear beam bushings. This puller is specially designed for Renault Megane II, Scenic II and Grand Scenic II models.

Product code: W0379

The key to rotate the crankshaft VW, Audi 2.4 / 3.2 FSI / 3.0, 4.2, 5.2 TDI Common Rail

This crankshaft turning wrench is specially designed for Volkswagen and Audi vehicles.

Product code: W0381

Timing lock for BMW 2.5, 3.0 petrol engines: N51, N52, N52K, N53, N54

Timing lock for BMW 2.5, 3.0 petrol engines with chain: N51, N52, N52K, N53, N54.

Product code: W0382

Adapter to pull the injectors HDI Siemens M25 x 1 (hardened)

The precision-engineered threads of this adapter ensure a perfect fit, ensuring a secure connection with the injector.

Product code: W0393

Viscous clutch key Volkswagen Crafter 2.5 TDI

The Volkswagen Crafter 2.5 TDI viscous clutch wrench is a special tool that helps remove and install the viscous clutch unit. For Volkswagen Crafter models with a TDI common rail engine.

Product code: W0404

Crankshaft locking pin Ford, Volvo, Mazda 1.25, 1.4, 1.6 Zetec, Duratec

Crankshaft locking pin Ford Fiesta, Focus, Volvo C30, S40, V50 Mazda 1.25, 1.4, 1.6 Zetec, Duratec engines.

Product code: W0406

Injector puller adapter HDI 2.0, 1.3 CDTI

Injector puller adapter HDI 2.0, 1.3 CDTI

Product code: W0409

Puller sleeves of rear beam / bridge Mercedes W210, W202, W203, W140 (OE 129 351 21 42)

The bushing puller is used to remove and install the rear axle bushing.

Product code: W0424

Injection pump removal tool for BMW N47, N47S Common Rail engines

Pinion extractor for diesel injection pumps in BMW N47, N47S and N57 1.8d, 2.0d, 2.5d, 3.0d engines manufactured in 2007 - 2015. This extractor is compatible with new generation BMW engines that have the distribution in the back (at the flywheel).

Product code: W0423

Ball joint socket wrench for Renault Master III, Opel Movano B

Ball joint socket wrench for Renault Master III, Opel Movano B.

Product code: W0469

The key to the lock nut KM9

The socket wrench is designed for safe and easy tightening and loosening of bearing nuts.

Product code: W0472

Ball joint wrench for Kia, Hyundai front arm pins, hexagonal extension

Ball joint wrench for Kia Creed, Hyundai i30 front arm pins, hexagonal extension. OE: J4860323, KI-BJ-13409, V53-0107.

Product code: W0474

Lock timing MERCEDES-BENZ 1.8-2.1 engines M651 MB (07-)

The kit allows positioning the camshafts in the installed position, as well as for turning, installing and removing the crankshaft pulleys.

Product code: W0478

Puller hub bearings Renault Trafic, Opel Vivaro 2.0 DCI

Product code: W0487

Timing lock set for BMW 2.0, 3.0D N47, N47S, N57 diesel (2007 - 2012)

Timing lock set for BMW 2.0, 3.0D N47, N47S, N57 diesel (2007 - 2012).

Product code: W0491

Puller hub / bearing Fiat Ducato Citroen Jumper

Product code: W0499

Socket wrench for KM10 lock nuts, 78.5mm

Socket wrench for KM10 lock nuts, 78.5mm, hexagonal drive

Product code: W0507

Bearing nut socket wrench, KM 12, internal pins

Bearing nut socket wrench with internal pins. For KM12 M60 x 2 nuts.

Product code: W0510

Puller sleeve rocker back Fiat Doblo 2010-

It simplifies the process of removing and installing the rocker back assembly, contributing to the overall maintenance and repair of the engine's valvetrain system.

Product code: W0523

Injector puller for removing Denso injectors M25x0,5 on Toyota and Mazda

The Injector Puller designed specifically for removing Denso injectors with an M25x0.5 thread on Toyota and Mazda vehicles is a versatile and reliable tool engineered to simplify the injector removal process.

Product code: W0535

Lock nut socket wrench, grooved, KM7

Lock nut socket wrench, grooved, KM7.

Product code: W0545

Rear crankshaft oil seal replacement tool for Iveco 3.0, Mitsubishi Fuso 3.0 Euro 5

Rear crankshaft oil seal replacement tool for Iveco 3.0, Mitsubishi Fuso 3.0 Euro 5

Product code: W0619

A key for locking the pulley shaft Ford / Volvo 1.4, 1.6, 1.8, 2.0, 2.3 16v Duratec

Product code: W0566

Key/nut for the bearing nut KM 10, internal stud bolt

This tool is provide a secure fit and facilitate the proper tightening or loosening of the locknut during bearing installation or removal processes. The key/nut is manufactured using hardened, high-grade materials to ensure durability and strength, making it capable of withstanding the forces involved in working with bearings and locknuts.

Product code: W0573

Wrench / Cap for KM 5 grooved nut from the inside

The tool is allows for reliable and powerful tightening or loosening and ensures that the nut is properly fixed.

Product code: W0579

Injection pump puller VW, Seat, Skoda 1.6, 2.0 TDI CR

Remove your VW, Seat, or Skoda's high-pressure pump hub with ease using our Injection Pump Puller. Designed for 1.6L and 2.0L TDI CR diesel engines. OEM code: T40064.

Product code: W0586

Wrench for KM13 bearing nuts

Wrench for KM13 bearing nuts with an outer diameter of 91mm and an inner diameter of 78mm, this wrench provides a secure and accurate grip on the specific size of KM13 bearing nuts.

Product code: W0592

Pulley puller three-armed 40-85mm

The Three-Armed Pulley Puller is a versatile tool designed for removing pulleys from various mechanical systems. It is particularly useful for pulleys with a diameter ranging from 40mm to 85mm.

Product code: W0601

The keys for locking the pulley shaft Mercedes M112, M113, M271, M272, M273, M642

Product code: W0604

Lock nut wrench for KM16 locknuts

Lock nut wrench for KM16 locknuts. O.D.: 109mm. I.D.: 97.6mm.

Product code: W0624

Fuel filter wrench for Ford Transit 2.2 TDCI

Fuel filter wrench for Ford Transit and Tourneo 2.2 TDCI. Used for the removal and installation of fuel filters in the specified vehicles. Provides a secure and reliable grip on the fuel filter, facilitating easy loosening and tightening. Constructed with robust materials to ensure long-lasting performance.

Product code: W0625

Face mill for VW, Seat, Skoda 1.9, 2.0, 2.4, 2.5, 3.3 V5, V6, V8 TDI, 5 guide pins

Face mill for VW, Seat, Skoda 1.9, 2.0, 2.4, 2.5, 3.3, V5, V6, V8, TDI injector seats. Includes 5 guide pins.

Product code: W0630

Glow plug reamer, 11mm

Tool for reaming broken glow plug shafts. Diameter: 11mm. Length: 11cm.

Product code: W0634

Windscreen nozzle adjusting tool Opel Astra J, Insignia, Cascada, Zafira

Designed specifically for the unique washer jets fitted to vauxhall/opel vehicles. Ideal for adjusting stuck windscreen nozzles. With four gripping claws and angled profile.

Product code: W0638

Rear crankshaft oil seal replacement tool for Iveco, Fiat, Citroen, Peugeot 3.0

Rear crankshaft oil seal replacement tool for Reinz, Erling, Glaser 13.65mm seals.

Product code: W0640

Lock nut socket wrench KM13 for bearing nuts

Lock nut socket wrench KM13, 6 teeth, thread: M65 x 2, internal teeth.

Product code: W0648

Synchronizer wheel puller, Volvo AT03112C

Tool for removing the gear synchronizer wheel for high and low gears in Volvo truck AT03112C manual transmissions with retarder (decelerator).

Product code: W0649

Key camshaft actuator BMW / Mini B38 B46 B48

Product code: W0660

Camshaft pulley locking wrench for Subaru

Camshaft pulley locking wrench for Subaru. Removes the intake and exhaust cam sprockets on AVCS without damage.

Product code: W0680

Socket wrench for lock nuts, KM14

Designed for safe and easy tightening and loosening of lock nuts.

Product code: W0694

Timing lock set for Audi 2.8 FSI, 3.2 FSI, 3.0 TFSI

Timing lock set for Audi A4, A5, A6, A7, A8, Q7, S4, S5, Q5, SQ5 2.8 FSI, 3.2 FSI, 3.0 TFSI. OEM: T40133-1, T40133-2, T40069.

Product code: W0704

2-jaw and 3-jaw gear puller set

2 or 3 jaws that can be adjusted to fit various sizes of gears, pulleys, bearings, and other components.

Product code: MG04J1125

Internal bearing puller tool set, 8-58mm

This internal bearing puller tool set can handle jobs requiring clamping, with a capacity of 8-58mm. Includes 3 threaded adapters and 11 gripping sizes. Easy and efficient!

Product code: MG50148

Piston ring pliers, 80-120mm

Designed for installing and removing piston rings. The jaws are designed to protect the piston ring from damage.

Product code: MG50335B

Piston ring pliers, 110-160mm

Designed for installing and removing piston rings. The jaws are designed to protect the piston ring from damage.

Product code: MG50335C

Glow plug puller set

Glow plug puller set for removing glow plugs attached to the engine. Comprehensive kit for removing stubborn glow plugs. Ideal for removing plugs that have been unscrewed but jammed due to build-up or where the filament is distorted.

Product code: MG04A6033

Oxygen sensor thread chasers, 2pcs

The Oxygen sensor thread chasers comes with tools that allow you to repair a damaged or damaged lambda sensor thread instead of having to replace the entire lambda sensor.

Product code: MG04A6021

Universal injector seat cleaning set

Universal injector seat cleaning set. Nylon brushes: 15mm, 20mm. Steel wire brushes: 18mm, 22mm, 25mm.

Product code: MG04A3064

Wrench for BMW & Mercedes Steering Gear Side Nut

This is a dedicated wrench, purposefully designed for the assembly, disassembly, and adjustment of the side nut in BMW and Mercedes steering gears.

Product code: W0729

Injection pump gear puller Hyundai, KIA 2.5 CRDI

This injection pump gear puller is engineered specifically for removing the sprocket of the high-pressure pump, ensuring smooth and damage-free operations.

Product code: W0730

MAN front axle cap, 6 teeth, 92.50mm

Designed specifically for MAN trucks, ensuring seamless integration and optimal performance. Meticulously crafted with a 6-teeth configuration, providing superior fit.

Product code: W0732

Fuel injector puller and installer tool set for BMW, Mercedes Benz

Designed to facilitate the removal and installation of fuel injectors in BMW and Mercedes Benz vehicles. Made with the highest quality materials to ensure the effective removal and installation of fuel injectors without causing damage.

Product code: JBM54220

Double flaring brake line tool kit, 13pcs

Double flaring brake line tool kit the primary tool for chip-free and parallel cutting as well as pipe flanging.

Product code: MG99066

Pulley puller, universal

Using the tool, the timing wheel can be removed from the shaft quickly and without damage. Its design allows it to be used in many types of cars. Solid metal design. The puller fits well in the wheel, with 8 grooves, the legs can be fixed in several positions.

Product code: MG04A2240

Valve Lapping Tool Attachment, 6 parts

Using a Valve Lapping Tool Attachment to grind the valves.

Product code: MG04A2269A

Oil filter chain wrench

Oil filter chain wrench

Product code: MG04A5098

Mercedes Benz CDI Diesel Engine Glow Plug Extractor Remover and Repair Kit

Mercedes Benz CDI Diesel Engine Glow Plug Extractor Remover and Repair 3-pieces Kit.1 pc tapered reamer hex:6x10mm, 1pc tapered reamer hex 7x13mm, 1pc glow plug extractor for glow plug threads hex 10x19mm

Product code: MG04A6016

Ball joint separator set, 5pcs

Ball joint separator set, 5pcs ideal for assembling and disassembling wishbones,, ball joints, socket joints, tir rods and individual gimbal joints.

Product code: MG04B3051

Brake fluid tester

Brake fluid tester is designed to analyze the amount of moisture content within the brake system.

Product code: MG04D7012

3-Jaw Internal & External Puller Set

Can be used for pulling automotive parts, wheel bearings, gears and more. Comfortable T handle provides secure grip while working.

Product code: MG04J1011

Glow/Spark Plug Socket Set, 6pcs, 3/8"

The tool set are specially designed to fit and securely grip the spark plugs or glow plugs during installation or removal.

Product code: MG50377

Spring compressor set

For the removal and fitting of suspension springs on all types of McPherson struts with conical and cylindrical springs on the front and rear axle. 65-125mm, 88-160mm, 125-215mm

Product code: DK-230579A

Spark/Glow plug and oxygen sensor master service set, 11pcs

Forged Chrome Vanadium master service set for the professional. Includes all the sockets and extensions required to remove/install sprak/glow plugs and oxygen sensors on most modern vehicles.

Product code: MG92585

Flywheel locking tool for 1.3 TCe engines

Flywheel locking tool for Mercedes-Benz 1.3M, Dacia, Nissan 1.3 TCe, Dacia 0.9, 1.6 petrol engines

Product code: C01/0262

Puller for replacement hydraulic tappets - Opel 8V

Product code: W0307

Puller for wheel hub / bearing Ford Focus II, C-Max, Volvo, Mazda 3,-puller with ABS and without ABS

Product code: W0305

Adapters to bolts down Jeep - Cherokee, Grand Cherokee, Wrangler

Product code: W0398

Rear axle bushing press for Toyota Yaris, Passo, Echo

The Rear Axle Bushing Press is designed to facilitate the installation or replacement of rear axle bushings in Toyota Yaris, Passo, and Echo models. Rear axle bushing press for Toyota Yaris, Passo, Echo. Bushing

Product code: W0720

Hyundai / Kia fuel filter key (108mm)

For those working on fuel filter changes, this tool is essential.

Product code: W0712

Wishbone lever tool

Wishbone lever tool, Length: 1180mm, Tube: Ø 3.5cm, Brace distance: 50 - 45 - 40 - 35 - 30cm, Fastening support: 15 x 13cm

Product code: JBM51902

Oil filter wrench for VAG DSG gearboxes. 24mm

Oil filter wrench for DSG gearboxes. 24mm and 1/2" square drives.

Product code: CKB10094

Ratcheting brake caliper press

Effortlessly maintain your brake calipers with our ratcheting brake caliper press. Its 360° rotation and centrally located ratchet evenly spread force to prevent misalignment. Works on twin and quad piston fixed calipers, as well as single calipers. Comfortable ergonomic handle included.

Product code: MG04B4069

Mercedes-Benz, BMW Visco cooling fan clutch tool set

Special tools for Mercedes Benz, BMW, Ford cooling fan clutches, water pumps

Product code: MG50702

Axial joint tool, 27-42mm

Axial joint tool, 27-42mm can be used to remove and attach the axial joints.

Product code: MG50444

Clutch centering mandrel, 11pcs

11pcs clutch centering mandrel with accessories, Ø20-26.6mm, Ø15-19mm, Ø23-36mm, Accessories diameters: 12, 14, 15, 16, 17, 18, 19, 20mm

Product code: JBM53410

Oil cap socket set with ratchet and wrench

A set for unscrewing oil filter caps.

Product code: CKB04111

Brake piston driver

Device for screwing the brake pistons.

Product code: CKB04078

Universal wiper arm puller

Universal wiper arm puller. Two paws type.

Product code: W0123

Crankshaft front oil seal puller for Iveco 3.0

The crankshaft front oil seal puller is a specialized tool designed to remove the front oil seal without causing damage to the crankshaft or engine components.

Product code: W0434

Puller / Press sleeve metal - rubber arm rear longitudinal Honda Civic, CR-V, Concerto, CRX, Rover 200 (OE-sleeve 52385 SR3-000)

Product code: W0485

Puller sleeve rear beam Front Bmw Series 5,6,7 / F 10, F11, F12, 13, F01 (33316790573, 33 31 6 775 780)

This tool is a great help in installing and removing the bushing. Puller sleeve rear beam is a high quality tool specially designed for Bmw Series 5,6,7 / F 10, F11, F12, 13, F01 models. This tool fits the vehicle perfectly and guarantees perfect operation and durability.

Product code: W0488

Cap / key of the bearing grooves 8 hp; 58mm

This cap/key is designed for bearings with 8 grooves and a diameter of 58mm. It is constructed using high-grade materials, ensuring durability and reliability during use. The purpose of the Bearing Groove Cap/Key is to provide a secure fit over the bearing, allowing for easy installation, removal, or adjustment.

Product code: W0544

Air conditioner clutch wrench, Denso 28mm (hardened)

Pin wrench for A/C compressor pulley clutch discs. This tool allows for accurate and safe tightening and tightening when replacing or servicing A/C compressor clutch pulleys. The 28 mm hole spacing allows the device to fit precisely to the pulleys, thus ensuring stable and efficient operation.

Product code: W0666

Socket / Wrench For lock nuts, KM 20

The Socket/Wrench is designed to fit lock nuts with KM20 specifications, ensuring a precise and snug fit. The outer diameter of 130mm and internal diameter of 121mm are tailored to match the dimensions of the lock nut for optimal functionality.

Product code: W0702

Bearing and gear puller with 3 jaws. Working range: up to 12" (305mm)

Bearing and gear puller with 3 jaws. Working range: up to 12" (305mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02235

Key to loosening the rear hub nuts M55X1,5 Mercedes Sprinter, VW Crafter after 2006 (hardened)

Key to loosening the rear hub nuts is designed to fit the specific dimensions of the hub nut and provide the necessary grip and torque for loosening it.

Product code: W0403

Press the king pins the upper and lower Jeep - Cherokee, Grand Cherokee, Wrangler

The tool is used to remove and install the kingpins in the steering knuckle assembly. Use the king pin press tool to press out the king pin from the steering knuckle. The tool will apply force to push the pin out of its housing. Once the king pin is pressed out, you can inspect it for wear or damage and replace it if necessary.

Product code: W0401

Press the down crossover pins Jeep Cherokee, Grand Cherokee, Wrangler

Product code: W0399

Wrench nut bolt Mercedes ML - W 163 ML ; W 164 ML

Wrench nut bolt specifically designed to fit and loosen/tighten the nut bolts used in various components of the vehicle. These nut bolts can be found in different areas of the ML, such as the suspension, engine, or other mechanical parts.

Product code: W0366

Puller bushings rear beam Renault Laguna II (to no of original sleeves with flat his back)

Product code: W0329

Lock Flywheel Renault 1.2 / 1.6 Petrol, 1.9 D / TD

Lock Flywheel Renault 1.2 / 1.6 Petrol, 1.9 D / TD is a specialized tool designed to securely lock the flywheel in place during various maintenance and repair tasks. This lock is specifically tailored for Renault vehicles, including models such as Clio, Kangoo, Megane, Twingo, Scenic, Laguna, Express, and Expert, equipped with 1.2, 1.6, 1.9 D / TD engines.

Product code: W0327

Lock Belt VW / Audi / Seat / Skoda 1.8 FSI / TFSI

A Lock Belt is a special tool used to secure the pulleys of cars during service or repair. Can be used specifically for VW / Audi / Seat / Skoda 1.8 FSI / TFSI models.

Product code: W0317

Timing lock for Ford, Peugeot, Volvo - 2.0, 2.2 D

Timing lock for Ford and Peugeot 807, 607, 407, Volvo - 2.0, 2.2 D.

Product code: W0300

Adapter for Opel, Fiat, Alfa Romeo 1.9 JTD injector pulling

Adapter for Opel, Fiat, Alfa Romeo 1.9 JTD injector pulling.

Product code: W0281

Puller to the hub / bearings VW T5

Puller to the hub / bearings VW T5

Product code: W0129

Puller for belt pulleys, three-arm with extended arms

Puller for belt pulleys, three-arm with extended arms

Product code: W0070

Plastic bushing puller for Skoda Octavia II, VW, Seat

Plastic silent puller for Skoda Octavia II, VW Touran, Golf IV, Jetta III, Golf V, Seat Ibiza IV, Toledo III. Sleeve OE: 6Q0 407 183.

Product code: W0155

Valve spring extractor adapter 8V

A special tool designed to remove valve springs in 8 valve engines.

Product code: W0442

Camshaft locking bar for Ford 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V engines

Camshaft locking bar for Ford 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V engines

Product code: C01/0001

Timing lock set for Ford, Mazda, Volvo 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V

Timing lock set for Ford, Mazda, Volvo 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V. Locking pin for the shaft and two camshafts and pins for blocking the crankshaft.

Product code: C01/0002

Camshaft lock for BMW engines M52, M54, M56

Camshaft lock for BMW Vanos engines M52, M54, M56. Tools for setting variators, cylinders, chain, main chain tension and the chain tensioner lock. 

Product code: C01/0010

Timing locks for Ford, Mazda, Volvo 1.4, 1.6, 2.0 16V

Timing locks for Ford, Mazda, Volvo 1.4, 1.6, 2.0 16V.

Product code: C01/0014

Engine timing lock set for Ford, Mazda, Peugeot, Citroen 1.4 and 1.6 diesel

Engine timing lock set for Ford, Mazda, Peugeot, Citroen 1.4 and 1.6 diesel.

Product code: C01/0017

Camshaft lock for BMW M52 M54 M56 M52TU engines

Camshaft lock for BMW M52 M54 M56 M52TU engines.

Product code: C01/0033

Belt pulley wrench for BMW diesel engines

Belt pulley wrench for BMW diesel engines.

Product code: C01/0100

Camshaft lock for Volvo 2.5 Turbo petrol engines

Camshaft lock for Volvo and Ford 2.5 Turbo petrol engines. (S40, S60, S80, V50, V70, C70, XC70, XC90, Ford Focus, S-Max, Galaxy, Mondeo).

Product code: C01/0114

Camshaft, crankshaft and chain locking tool for BMW, Mini 1.4 and 1.6 16V

Camshaft, crankshaft and chain locking tool for BMW, Mini with 1.4 and 1.6 16V engines.

Product code: C01/0115

Timing lock for Ford, Fiat, Citroen, Peugeot 2.2 TDCI engines

Timing lock for Ford, Fiat, Citroen, Peugeot 2.2 TDCI engines.

Product code: C01/0179

Crankshaft lock for BMW and Mini petrol and diesel engines (2014-)

Locks the crankshaft pulley in BMW and Mini petrol engines B38, B48, B58 and diesel engines B37, B47, B57.

Product code: C01/0224

Engine timing kit for Hyundai, Kia 1.6 Diesel engines

Engine timing kit for Hyundai, Kia 1.6 CRDi, D4FE, D4FE (U3) Diesel engines.

Product code: C01/0231

Renault and Peugeot rear axle bush remover and installer

Designed for the removal, installation and alignment of rear axle bushes on Renault Laguna II and Peugeot 207.

Product code: C02/0094

Bushing and silent press for Mercedes, VW, Renault, Opel, Nissan

The tool is used for pressing in and out the pins and silents without the disassembly of the control arm, thus saving you time and energy.

Product code: C02/0140

Hex key for Bosch injector valve

H10 hex wrench with a 7.5mm hole for disassembly of Bosch injector valves.

Product code: C04/0087

Injector puller with sliding hammer for Mercedes CDI injectors

Injector puller with sliding hammer for Mercedes CDI injectors in OM611, 612 and 613 engines.

Product code: C04/0095WF

Engine timing tool kit for BMW S54 engines

Specifically designed for the popular BMW M3 fitted with the chain driven 3.2 litre 6 cylinder 24-valve petrol engines. Engine code S54 (32 6S 4)

Product code: CKB01062

Ball joint removal tool set

Designed for easy removal of most popular types of pitman arms, tie rods and ball joints. Operation range: 17, 19, 21, 23, 27mm

Product code: CKB04340

Fish tape, 30m, green

30m steel cable fish tape in plastic green case. Flat metal tape, size 3x1mm. Insertion head size 40x10x3mm.

Product code: FT100-GREEN

Valve lapping tool attachment set for drill

Improve engine valve sealing ability and prevent leaks with our Valve Lapping Tool Attachment Set for drill. Use with drills and fine grinding compound. Features 8mm shaft and 4 suction cup diameters. Working speed 1000-1250rpm.

Product code: MG04A2269

Fish tape, 30m, red

30m steel cable fish tape in plastic red case. Flat metal tape, size 3x1mm. Insertion head size 40x10x3mm.

Product code: FT100-RED

Stud Wrench 8" 12-21mm

Fully adjustable with a one-handed squeeze. Efficient ratcheting by releasing, then re-gripping the object. Often removes nuts and bolts damaged by other tools.

Product code: G00860

Hydraulic jaw puller kit 5t

Multi-function puller with adjustable two or three leg function. Allows bearings, gears, etc. to be easily removed with minimal effort by use of the hydraulic puller.

Product code: G00910

Hydraulic jaw puller set 10t

Multi-function puller with adjustable two or three leg function. Allows bearings, gears, etc. to be easily removed with minimal effort by use of the hydraulic puller.

Product code: G00911

CV joint clamp banding tool

CV joint clamp banding tool is suitable for installation and tightening of band-style clamps on CV joint boots, power steering rack and pinion steering gear boots.

Product code: G01653

CV boot clamp pliers (ear type)

CV boot clamp pliers suitable for Oetiker CV drive shaft boot securing clips. Plier's plate presses a flat on the top of the clip so that it forms the spring loop correctly.

Product code: G01656

Fuel feed pipe pliers

Suitable for the removal of connectors on in-line fuel filter.

Product code: G01659

Oil funnel with built in filter

Oil funnel with built in filter and flexible hose. Dia.: 140mm

Product code: G02150

Vacuum gauge and fuel pump pressure tester set with adapters

Measures vacuum up to 70cmHg and pressure up to 0.7bar. Fittings included for compatibility with most cars.

Product code: G02508

Brake piston presser. Max 70mm jaw spread.

Essential tool for pressing in the brake piston to allow insertion of new brake pads.

Product code: G02534

Universal three arms oil filter wrench 3/8" (65-130mm)

Oil filter wrench with 3 arms can be adjusted from 65 - 130mm in diameter. Comes with an adapter so it fits any 3/8" and 1/2" square drive ratchets or extensions.

Product code: G02550

Oil filter strap wrench 85-95mm

Band wrench for replacing oil filters in cars and vans. Designed for filters with a diameter of 85 to 95mm.

Product code: G02562

Oil filter strap wrench 95-110mm

Band wrench for replacing oil filters in cars and vans. It is designed for automotive repair.

Product code: G02563

Oil filter strap wrench 60-105mm

Band wrench for dismounting all types of oil filters with a diameter of 60 to 105mm.

Product code: G02564

Lever style valve spring extractor. For 8, 16, 24V engines

Lever press designed to disassemble and remove valve springs in 8V/12V/16V/24V OHV, OHC and CVH engines. Adapters: 24, 30, 35mm

Product code: G02573

Ball joint seperator for pin diameters up to 19mm

Professional ball joint pin puller. It is made of durable, high-quality tool steel. It is adapted to work with pins with a diameter of not more than 19mm.

Product code: G02587

Hook and pick set 6pcs (Lenght: 240mm)

Hook and pick set for removing seals, O-rings and gaskets.

Product code: G02706

Hook and pick set, 9pcs

Hook and pick set for removing oil seals, o-rings and gaskets

Product code: G02708

Tube flaring set 3-19mm

Tube flaring set for tubes with diameters: 3, 5, 6, 8, 10, 12, 15, 16, 18, 19mm.

Product code: G02720

Wiper arm puller

Wiper arm puller. The puller is used to remove car wiper arms. Made of durable chrome-molybdenum steel.

Product code: G02770

Alternator key with 6 point 17mm outter drive. Length 30mm

Bosch alternator clutch wrench. A specialist wrench for assembly and disassembly of the pulley clutch of Bosch alternators.

Product code: G02782

5pcs strut nut tool set for Audi, VW and Mercedes

A set of nut tools for tightening and loosening shock absorber mounts.

Product code: G02785

Ball joint press set

For the removal of ball joints, U-joints, brake anchor pins, and more on most 2 wheel drive (2WD) and 4 wheel drive (4WD) vehicles without removing the control arm from the vehicle.

Product code: CKB04009

Break piston removal tool

Essential tool for retracting the brake piston to allow insertion of new brake pads.

Product code: CKB04066

Car mini bladed fuse set, 140pcs

Car mini bladed fuse set, 140pcs

Product code: G02825

Car non-insulated terminal connector set, 750pcs

Car non-insulated terminal connector set, 750pcs

Product code: G02828

Gear and bearing puller with 3 jaws. Max capacity: 14" (350mm)

Gear puller with 3 jaws 14" (350mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02247

Heat shrink tubes with tin, 50pcs set

The use of tin shrinkable tubing allows for a durable and waterproof connection of two wires, which is possible thanks to the inner layer of glue.

Product code: G03607

Heat shrink tubes with tin, 100pcs set

The use of tin-shrinkable tubing allows for a durable and waterproof connection of two wires, which is possible thanks to the inner layer of glue.

Product code: G03608

10pcs bolt extractor set

Set for removing damaged nuts and bolts with sizes of 9 - 19mm.

Product code: G30032

14pcs E4-E24 Torx socket set

14pcs E4-E24 Torx socket set. Use with 1/2", 3/8", 1/4" drives.

Product code: G13566

Universal socket adapter 7 to 19mm diameters

The universal socket is designed to automatically adjust to fit any nut or bolt with 7 to 19mm (1/4" to 3/4") diameters.

Product code: G15020

Universal socket adapter 7 to 19mm diameters

Universal socket adapter. For nuts and bolts with 7 to 19mm diameters.

Product code: G15021

Multifunctional socket wrench 48in1. Socket diameters: 8-19mm

It can replace wrenches intended for 12-point, 6-point, 4-point, E-Torx and spline screws and nuts.

Product code: G15030

Pilot bearing puller. For bearing with inner diameters: 12-38mm

Suitable for removing tight fitted sleeve type bearings and bushings with inner ring diameters of 12 to 38mm.

Product code: G30300

Pilot bearing puller. For bearing with inner diameters: 12-38mm

Suitable for removing tight fitted sleeve type bearings and bushings with inner ring diameters of 12 to 38mm.

Product code: G30301

Bearing puller set, 14pcs

Designed for pulling bearing off shaft and separating bearing housings.

Product code: DK-230589

Tube double flaring set, 9pcs

Tube double flaring set, 9pcs for brake line tubings.

Product code: K00180

Timing chain and camshaft locking tool set for Mercedes engines

This timing chain and camshaft locking tool set is to be used on M271, DE18ML, E16ML, DE18LA, 4 cylinder, 2003-2005 Mercedes engines.

Product code: MG04A2121

Diesel injector puller set with Common Rail adaptors

Efficiently remove stuck and seized diesel injectors with ease using our Diesel Injector Extractor Set with Common Rail adaptors. Featuring robust construction, this specialized sliding hammer allows for rapid withdrawal, even for the most severely seized injectors. Includes various adapters and sizes for all injection nozzle cars.

Product code: MG50633

Heavy-duty oil filter belt strap wrench, 9"

An oil filter strip wrench is a special tool used to remove oil filters. By placing the band wrench on the filter and turning the wrench, it grips the filter tightly, making it easy and safe to remove. Using an oil filter wrench is much more efficient than conventional oil filter pliers, because the wrench can exert much more force and does not slip on the surface of the filter.

Product code: CKB08200

Petrol & Diesel Engine Compression and Leakage Test Kit

Petrol & diesel engine compression and leakage test kit, with glow plug-, injector-, and spark plug adaptors

Product code: MG04A1066D

Fuel pump remover/installer, 3 claws

The 3-claw fuel pump wrench is a special tool used to disassemble and maintain fuel pumps. This wrench has three adjustable toothed flanges to easily fit different sizes and types of pumps.

Product code: MG50644

Shock absorber spring compression, heavy duty, 2,3T

Macpherson spring compression tool. Adjustable 100-265mm. Fits most car models. Drive: 24mm allen.

Product code: MG04B2116

Petrol engine compression test kit, 0-20bar

Suitable for passenger cars and motorcycles, double scale gauge 0-20bar (0-290psi), adapters M10, M12, M14 (64, 94mm), M18

Product code: MG50184

Cup-type oil filter wrench set, 30pcs

Twin-function oil filter wrench set (65-120mm), square drive: 1/2", 3/8", self-setting oil filter wrench. For almost every car type. Withstand up to 115Nm (851b.ft) of torque.

Product code: MG50038

Transmission oil filling system (ATF) with 8 adaptors

The ATF (Automatic Transmission Fluid) transmission oil filling system is a professional tool designed to accurately and cleanly refill transmission oil.

Product code: MG04B1101

Piston ring compressor 3", 53-175mm

3" piston ring compressor. Ø 53/175mm

Product code: JBM52696

Universal press and pull sleeve kit, 34-82mm

Spindle: M10, M12, M14, M16, M18, Adapters (Outer/inner diameter): 74/54mm, 76/56mm, 78/58mm, 72/52mm, 70/50mm, 68/48mm, 80/60mm, 82/62mm, 66/46mm, 64/44mm

Product code: JBM52494

Chain breaking and riveting tool set

Designed for breaking and riveting drive chains. Suitable for car, motorcycle, bicycle chains.

Product code: G02682

Chain type oil filter wrench

Chain type oil filter wrench. Widely used for pipeline construction and oil filter removal.

Product code: G02555

Bearing and gear puller with 3 jaws. Working range: 12" (305mm)

Bearing and gear puller with 3 jaws. Working range: 12" (305mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02246

Ball joint separator and installer tool set

This ball joint tool kit is suitable for removing and fitting press-fit type ball joints without removing the vehicle's control arm. The pressing device's gap size is 152mm.

Product code: CKB04011

Front arm bushing puller BMW E39

The Front Arm Bushing Puller BMW E39 is a tool designed to remove the front arm bushing from the BMW E39 model.

Product code: W0057

Universal press for bolts and sleeves

Universal, strengthened press for bolts and sleeves of trailing arms.

Product code: W0099

Press, puller for bolts Renault Master / Opel Movano

Press, puller for bolts Renault Master / Opel Movano + W0160 adapter

Product code: W0161

Rocker arm nut wrench for Citroen, Peugeot

Rocker arm nut wrench for Citroen XM, Xantia X1i, X2, C5 I / II , Peugeot 405 I / II ,406 ,605 ,607 cars.

Product code: W0194

Universal camshaft pulley locking tool set, 4 pairs of bit adapters

Universal camshaft pulley locking tool set, 4 pairs of bit adapters.

Product code: W0238

Puller sleeve rear beam (small) for BMW X5 E53, M57 etc.

Puller sleeve rear beam (small) (No. oe 33 17 6 770 457) for BMW X5 E53, M57, M57N, M54 etc

Product code: W0250

Socket wrench for M52x1.5 Mercedes Vario rear hub nuts

Our Socket Wrench for M52x1.5 Mercedes Vario rear hub nuts is the perfect tool for unscrewing wheel hub nuts on the rear axle of your Mercedes Vario (1996-2013). With an OE code of 6743560126, this wrench offers precise and efficient performance. Get yours today!

Product code: W0338

Lock the timing VW Transporter 2.4D (95-03), Volkswagen Crafter 2.5 TDi (06-09)

The timing lock tool is a special tool used for VW Transporter 2.4D (1995-2003) and Volkswagen Crafter 2.5 TDi (2006-2009) engines.

Product code: W0408

Puller injectors 2.0 HDI

Product code: W0411

Key viscous clutch Ford Transit 2.3 2.4 3.2 (2001 – 2006)

Product code: W0416

Puller arm sleeve Front Peugeot 406

This is a special tool that helps to stretch or remove the rocker arm bushing from the arm while minimizing the potential for damage and making the job easier.

Product code: W0422

Front crankshaft oil seal puller for Iveco, Fiat 2.3

This tool is designed to extract the front oil seal safely and efficiently without causing damage to the seal or the crankshaft.

Product code: W0437

Rear bushing puller BMW 1, 3, X1. BMW OE code: 33176760287, 33176760287

Rear silent puller BMW 1, 3, X1. OE codes: 33176760287, 20926439, 31471 0002, 26439, 51022, 6 760 287, FTR5226, 34643 01.

Product code: W0505

Diesel injector seat cutter for VW, Seat, Skoda 2.0 TDI, M16x1.5

Thread: M16 x 1.5, right. Diesel injector seat milling cutter for VW, Seat, Skoda 2.0 TDI. Cutter diameter: 38mm.

Product code: W0629

The key to the lock nut KM 12, 6 teeth

A special tool that can be used to tighten or loosen lock nuts. It provides great help, thanks to its hardened design and high load capacity.

Product code: W0650

Ford A/C compressor pulley locking wrench

The Ford A/C compressor pulley locking wrench is a specialized tool designed to immobilize the pulley of the air conditioning (A/C) compressor in Ford vehicles.

Product code: W0711

Puller (32x1,25) To pull sprocket a chain and the sleeve damper crankshaft in the DKW SB 350, NZ 250, NZ 350, F8 other model

Product code: W426K

Valve sealing install set, 6mm, 7mm, 8mm, universal

Valve sealing install set, 6mm, 7mm, 8mm, universal

Product code: W0059

Universal camshaft pulley holding tool, 21-100mm

Universal camshaft pulley holding tool, 21-100mm. For Mercedes Benz, Bmw, Ford, Mitsubishi, Honda, VW, Audi, Nissan, Toyota, Volvo, etc.

Product code: W0132

Short screw for bushing pullers M12, 150mm

This M12 short screw for bushing pullers is 150mm long and perfect for silent pullers. Get the job done quickly and efficiently with this durable tool.

Product code: W0530

Key / nut for the bearing nut KM 6 , studs internal

Product code: W0572

Oil filter key Kia / Hyundai 2.0 2.2 CRDI - 42-43 mm

The oil filter wrench is specially designed for tightening and loosening the oil filters used in Kia and Hyundai 2.0 and 2.2 CRDI engines. This tool helps in reliable and efficient handling of oil filters. The oil filter wrench allows for an easy and precise fit to the oil filters, providing an easy and safe way to tighten or loosen them in place.

Product code: W0594

7pcs Drive Shaft Puller / Extractor Set

The 7pcs Drive Shaft Puller / Extractor Set is suitable for pulling the half-axle into the wheel hub. In order to be able to carefully and evenly insert the half-axle into the wheel hub, it is necessary to use the appropriate adapters and accessories from the drive-in tool, so that the half-axle goes in securely and straight.

Product code: MG50046

Oil drain plug socket set of 23pcs

Oil drain plug socket set, 23 pieces for quick and easy oil change.

Product code: DK-122303

Steering rack knuckle tool set, 30-45mm

This steering rack knuckle tool set makes removing and installing steering knuckles fast and easy. With interchangeable heads to fit racks with hex drive, two flats, and round ends from 30-45mm, it's versatile and effective. Drive: 32mm Hex, 1/2" square.

Product code: MG50423

Universal brake caliper wind back tool kit, 16pcs

Pneumatic rewind tool for disc brake pistons with adapters. Brand new practical and convenient kit for replacing front and rear disc brake pads.

Product code: DK-230540

Socket 6 Teeth, 107mm for Low Floor Trailers

This is an essential tool for professionals working on low floor trailers. Featuring a robust 6-teeth configuration, it ensures accurate engagement and superior grip.

Product code: W0733

Ball joint separator 19-22mm

Steering rods, stabilizers, etc. designed to remove ball-jointed rotating parts.

Product code: MG04B3022

Diesel Camshaft/Head Rebuild Kit - VAG/Porsche/AUDI T40094/T40095/T40096

This kit is allows you to overhaul the camshaft and cylinder head on VAG, Porsche or Audi common rail diesel engines. It holds the camshaft in the correct position when installing it. Equivalent to the OEM tooling required to allow the camshafts to be correctly fitted into the cylinder head. This is necessary as the cylinder heads on these engines are designed with a camshaft retaining frame that splits from the cylinder head along the centre line of the cam bearing caps.

Product code: MG04A1030

Cooling system and radiator cap pressure test kit, 27pcs

Kit contains 27 pieces of equipment including 22 different test caps, a vacuum pump, pressure pump, cone adapter, and air bleeding/coolant hoses

Product code: DK-230547

Oil filter wrench set, cup type, 15pcs

The set includes 14 filter removal wrenches and a narrowing adapter. All wrenches have 3/8″ square drives. 65 - 100mm

Product code: DK-230525-15

Timing tool set suitable for VW Group 1.6 - 2.0 TDI CR engines - year 2012

This Timing Tool Set is compatible with a diverse lineup of VW Group vehicles, ensuring it covers a broad spectrum of popular models.

Product code: MG04A2184

High pressure pump sprocket remover for Hyundai and KIA

High pressure pump sprocket remover and flywheel lock for Hyundai and KIA. For chain driven 1.1, 1.4, 1.5, 1.6, 1.7 CRD diesel engines.

Product code: MG04A2331

Engine timing tool kit for Vauxhall and Opel 1.6 CDTi diesel engines

Engine timing tool kit for Vauxhall and Opel 1.6 (from 2013 to 2018) CDTi EcoFlex engines. Engine codes: B16DTC, B16DTE, B16DTH, B16DTJ, B16DTL, B16DTN, B16DTR, B16DTU.

Product code: MG04A2370

Engine timing tool kit for Ford 2.2, 3.2 TDCi

Engine timing tool kit for Ford Ranger, Transit, Everest, Mazda BT 2.2, 3.2 TDCi.

Product code: MG04A2432D

Petrol engine compression tester set

The petrol engine compression tester kit allows accurate measurement of the compression in the cylinders of car engines. The measuring kit allows you to quickly and easily diagnose the condition of the engine and possible problems.

Product code: G02502

Piston ring compressor, 4"x90 - 175mm

Piston ring compressor, 4"x90 - 175mm. Allows the assembly of pistons without damaging the piston rings.

Product code: G02621

Injector puller set, Bosch, Delphi, Denso, Toyota, Siemens, 10t

Injector puller set to be used with hydraulic hand pumps (not included). For M17 Bosch, M14 Delphi, M16 Toyota Adaptor, M20 Denso, M25 x 1.0 / M27 Siemens.

Product code: JBM54245

Spark plug and lambda probe thread repair kit

Spark plug and lambda probe thread repair kit is suitable for deaning corrosion and carbon build-up from spark plug / sensor threads.

Product code: MG04A6020

Injector gasket puller

For the extraction of copper sealing gaskets and washers within injector seats.

Product code: MG04A3079

Universaladjustable fuel tank lid remover

Universaladjustable fuel tank lid remover, which can be adjusted between 80mm-199mm, so it is a suitable choice for many types of cars.

Product code: MG04A3077

Extra-long pick and hook set, 6pcs

Suitable for removing O-ring clips or seals. Extra long pick and hook set is ideal for removing and replacing parts in hard-to-reach areas, as well as for precise handling of pipes, seals and wires.

Product code: MG92506

Brake fluid tester pen

Quick and easy method to accurately gauge the moisture content of all types of brake fluid.

Product code: G02731

Ball joint separator set, 3pcs

Ball joint separator designed for removing the track rod end from the steering arm without doing damage to the taper pin. Suitable for most small cars and light vans.

Product code: DK-230503

Oil drain pan, 10l

Oil drip tray is constructed of high quality, recyclable polythene plastic that is resistant to corrosion so your oil pan will remain durable for carrying oil, gasoline, and antifreeze. 385mm x 125mm

Product code: DK-230533-10

Universal silent and bearing puller kit, 24pcs

This professional tool set is designed for the removal and installation of bushings, silent bearings, hydraulic bearings and seals, etc.

Product code: DK-230581

Hydraulic bearing puller kit, 10T

Suitable for pulling hubs, flanges, gears and bearings.

Product code: DK-230584

Electric terminal release tool set, 23pcs

Perfectly removes terminals from coolant sensors, wiring harness connectors and terminal blocks. Fit for BMW, Mercedes, Opel, VW, Jaguar, Porsche, Saab, Seat, Skoda, Ford, Renault, Citroen, Fiat, Honda, Mazda, Mitsubishi, and Toyota vehicles.

Product code: DK-230588

Timing lock set for Ford, Volvo 1.6 GTDI, Ecoboost 1.8, 2.0 Duratec engines

The tool set is intended for adjusting the camshaft and crankshaft in Volvo and Ford 1.6, 1.8, 2.0 cars.

Product code: C01/0221

Timing tool set for Jaguar and Land Rover 2.0 GTDi

Tool set to replace the timing in Jaguar XE, XF, XJ and Land Rover Discovery Sport, Freelander, Range Rover, Evoque 2.0 GTDi. OEM codes: 303748, 3031565, 3031521, 3031595, 3031594.

Product code: C01/0234

Timing tool set for BMW N51, N52, N52K, N53, N54, N55 2.5 and 3.0 engines

Timing tool set for BMW N51, N52, N52K, N53, N54, N55 2.5 and 3.0 engines. OEM: 11.4.280, 11.4.281, 11.4.282, 11.4.283, 11.4.285, 11.4.290, 11.0.300, 11.8.520/521, 11.9.340.

Product code: C01/0235

Timing tool set for Mercedes Benz M177 and M178 V8 4.0L engines

Timing tool set for Mercedes Benz M177 and M178 BiTurbo V8 4.0L engines. OEM: 177589014000, 177589001500, 177589014000, 27158900100, 177589000900.

Product code: C01/0236

Crankshaft locks for BMW, Mini 1.6, 2.0 engines

Crankshaft lock for BMW and Mini 1.6 and 2.0 Diesel Common Rail N47 engines from 2013 and on.

Product code: C01/0245

Timing tool set for Ford 1.0 EcoBoost, 2012 and on

Timing tool set for Ford 1.0 EcoBoost, 2012 and on. OEM: 303-1661-1, 303-1661-2, 303-1661-3, 310-018, 303-1602, 303-1604, 303-1603, 303-732, 303-1054, 303-1661-1, 303-1661-2, 303-1661-3, 310-018,  303-1602, 303-1604, 303-1603, 303-732, 303-1054, 303-1605/1, 303-1605/2, 303-1606/1, 303-1606/2.

Product code: C01/0248

Injector removal set for Ford EcoBlue 2.0 diesel

Injector removal set for Ford Edge, Focus, Galaxy, Kuga, Mondeo, Ranger, S-Max, Tourneo Custom, Transit, Transit Custom EcoBlue 2.0 diesel. OEM: 303-1706.

Product code: C04/0244

Mercedes benz timing chain riveting tool set

Mercedes benz timing chain riveting tool set. For Mercedes Benz, Chrysler, Jeep 1.7 - 4.0 diesel engines.

Product code: MG04A2298

SAC clutch disassembly and assembly tool set

SAC clutch disassembly and assembly tool set for Audi, VW, Ford, Mercedes, BMW, Alfa Romeo, Fiat, Lancia

Product code: MG04B1083D

Pneumatic CV joint boot install tool

This pneumatic CV joint boot install tool makes installation fast and easy. It prevents boot damage and ensures a tight fit. Simply adjust the air control switch and place over the CV joint. Lubricate before use. Working pressure: 5-9bar. Perfect for auto mechanics!

Product code: MG04B1085

Piston ring compressor, 3"x125

Piston ring compressor, 3"x125. Allows the assembly of pistons without damaging the piston rings.

Product code: G02620

Piston ring compressor 6"x90 to 175mm

Piston ring compressor 6"x90 to 175mm. Allows the assembly of pistons without damaging the piston rings.

Product code: G02622

Hex Socket Adapter Kit

Hex socket wrench adapters for 1/4, 3/8, 1/2 sockets. It is made of 40Cr steel, the additional surface is oxidized. The perfect addition to any toolbox.

Product code: CKB01164

Oil drain plug socket set, 21pcs, 3/8"

Oil drain plug socket set, 21pcs, 3/8" for quick and easy oil changes. It includes several types and sizes of sockets, so the work will not be a headache.

Product code: CKB03949

Universal Tail Pipe Cutter Exhaust Pipe Cutting Wrench

Wrench designed for cutting steel exhaust pipes, but can also be used to cut copper steel pipes, PVC, etc. The Universal Exhaust Pipe Cutter is the best tool for exhaust system repair and maintenance. Easy to use and versatile to adapt to any exhaust pipe.

Product code: CKB07414

Professional dial gauge with magnetic base holder

Measuring the brake system is easier and more accurate than ever with the professional indicator watch magnetic base holder. The magnetic base ensures the fit, and the contact point detects even the smallest deviations. The dial pointer and the polished chrome control lever help with precise adjustment. The magnetic base can be easily removed with the on/off lever. Quickly check brake system play with this tool.

Product code: CKB03577

Dial indicator - metric version

The dial indicator is an element of industrial automation. It is used to check the geometrical shape of a given element and the proper preparation of the element for work on a given machine. It is mostly used in metalworking and the automotive industry but we can use in construction, research and development where high precision measurements are required.

Product code: CKB03578

Oil Filter Wrench - Nylon Strap

An oil filter wrench is a useful tool for removing and replacing the oil filter.

Product code: CKB01237

Exhaust Hanger Removal Pliers

Removal pliers are a special tool that allows you to easily and safely remove and reassemble the exhaust system without damaging the connections or seals. It enables easy, quick and one-handed use when removing the rubber strap.

Product code: MG04A2301

Fuel Feed Pipe Pliers

The Fuel Feed Pipe Pliers are excellent for disconnecting fuel connectors for fuel filter replacement or engine repair.

Product code: MG04A3074

Draing plug sockets set, 20pcs

Draing plug sockets set can be used to remove or fix oil drain plugs in cars.

Product code: MG04A5082

Axle nut socket set, 9pcs

Axle nut socket set, 9pcs is a special set of tools required for tightening and loosening vehicle axle nuts. These types of nuts are usually large and overtightened and require special wrenches to fit their size and shape.

Product code: MG04B1015

Mounting pad set for bearings, 52pcs

Mounting pad set for bearings, 52pcs is suitable for installing bearings or seals without damaging the bearing, seal or housing.

Product code: MG04B1035

CV Clamp Tool and CV Joint Boot Clamp Pliers Set

The 2-piece pliers set for quick and easy tightening and fastening of rubber bell clamps. Ideal for installing half-shaft rubber bells.

Product code: MG04B1007

Car air conditioner compressor clutch hub remover installer kit, 23pcs

Car air conditioner compressor clutch hub remover installer kit, 23pcs suitable for removing and installing clutch hubs and troubleshooting compressors and clutches.

Product code: MG04D1022

Radio removal tool set, 20pcs

Radio removal tool set, 20pcs for the removal of popular car stereos from Becker, Blaupunkt, Grundig, JVC and Pioneer systems. Ideal for Audi, BMW, Ford, Benz, Porsche, Skoda, Volkswagen.

Product code: MG04D2022

Bearing and seal drive-in set, 10 pcs

Bearing and seal drive-in set, 10 pcs. specially used for installing bearing rings and seals.

Product code: MG04J1040

Brake Disc Lathe Machine

Brake Disc Lathe Machine is suitable for discs of all cars and light commercial vehicles. The deformation that occurs on the surface of the disc over time can be removed by grinding with our machine. In this way, you can get a surface as if it were new. Lathe process can be done both automatically and manually. It is done by grinding both surfaces at the same time. All the tools required for the lathe process are available with the machine.

Product code: FDT6000

Drum Brake and Brake Disc Lathe Machine

Drum Brake and Brake Disc Lathe Machine is suitable for discs and drums of all cars and light commercial vehicles. The deformation that occurs on the surface of the drum over time can be removed by grinding with our machine. In this way, you can get a surface as if it were new. The turning process can be done automatically or manually. Thanks to the locking function of the disc lathe, the disc can also be turned if necessary.

Product code: KTM1000

Brake Disc Lathe Machine (Two-Functions)

Brake Disc Lathe Machine (Two-Functions) is specialized model to offer dual functionality. It has the feature of grinding both on the vehicle and outside with additional apparatuses to the existing disc lathe machine.

Product code: FDT7000

Onboard brake disc lathe machine

Using an on-board brake disc lathe saves time and reduces risk of misalignment by allowing precise resurfacing of brake discs without needing to remove them from the car.

Product code: FDT4000

Fuel System Cleaning Machine (Injection System)

Fuel System Cleaning Machine (Injection System) Designed to be a long-lasting, reliable, versatile and efficient machine, it is mechanically and electronically suitable for simultaneous testing and cleaning of diesel engines and petrol engines, including TDI, HDI and COMMON RAIL engines.

Product code: ETM1500

Radiator and Heating Core Cleaning Machine

Radiator and Heating Core Cleaning Machine is a tool used to clean the cooling systems of vehicles. Its main purpose is the effective cleaning of radiators and heating cores, which can accumulate deposits and dirt over time, thus reducing the cooling efficiency.

Product code: RDT3000

Brake Fluid Exchanging and Airing Machine

Brake Fluid Exchanging and Airing Machine is a device that is easy for one person to use, facilitates and speeds up the replacement of brake fluid, eliminates dirt and moisture in the brake system, and ensures adequate air removal for effective braking. It has the right cover kit for every vehicle.

Product code: FHD1000

Set of 3 Adaptors For Pneumatic Injector Puller (REF.JBM54186)

These adapters are an addition to our pneumatic injector puller product (JBM54186) line to provide additional versatility and compatibility with different types of injectors, allowing for a wider range of applications.

Product code: JBM16295

Timing lock and tools for high pressure fuel pump Renault 2.0 D Blue dCi from 2020

This tool is designed to ensure precise timing and secure removal of the high-pressure fuel pump and to fit the unique specifications of the Renault 2.0 D Blue dCi engine, guaranteeing compatibility and optimal performance.

Product code: C01/0261

Exhaust camshaft locking and wedging tool 1.2 VTI

This tool is a comprehensive set of tools designed for specific tasks related to the exhaust camshaft locking and alignment process. This kit includes various components and tools to ensure precise and efficient work.

Product code: C01/0270

Camshaft gear locking set with key VW / Audi / Seat / Skoda : 1.0 / 1.2 / 1.4 TSI and Bluemotion Petrol

By utilizing the Camshaft Gear Locking Set with Key, you can confidently perform timing-related tasks on the specified engines. It guarantees precise immobilization and alignment of the camshaft gear, facilitating accurate timing adjustments and ensuring optimal engine performance.

Product code: C01/0272

41 pcs Car Air Conditioning A/C Core Valves Assortment

41 pcs Car Air Conditioning A/C Core Valves Assortment with double ended valve core remover. This set is used for maintaining, repairing, and servicing car air conditioning systems. The valves included in this set are essential components that control the flow of refrigerant within the system.

Product code: G02814

Timing tool for PSA 1.2 GDI Puretech

The timing tool for PSA 1.2 GDI Puretech is specifically engineered for use with PSA 1.2 GDI (Gasoline Direct Injection) Puretech engines.

Product code: JBM54288

Flywheel lock kit for Mercedes, Renault, Dacia

The kit includes the necessary tools to lock the flywheel securely in place, preventing it from rotating during procedures such as clutch replacement, flywheel removal, or timing belt replacement. This ensures precise work and prevents damage to the engine components.

Product code: JBM54289

Terminal extractor with 6 connectors

Terminals can be easily removed with the help of this tool. With 6 pull-outs of different sizes, it is suitable for most electronic devices.

Product code: JBM54112

Exhaust camshaft locking and alignment tool

Exhaust camshaft locking and alignment tool for replacing the timing chain on cars.

Product code: C01/0271

Timing tool set for BMW, Land Rover, Opel 2.5 TDS

If you're working on BMW, Land Rover, or Opel 2.5 TDS engines, a dedicated timing tool set is crucial for efficient and successful maintenance and repairs.

Product code: W0285

Water pump locking tool for Opel 2.2 16V

This tool is designed to immobilize the water pump pulley, allowing for secure and efficient removal or installation of the water pump and associated components. To properly replace or service the water pump in an Opel 2.2 16V engine, a water pump locking tool is often necessary.

Product code: W0350

200cc fluid extractor set

The product has a capacity of up to 200 ml and is ideal for removing worn fluid in cylinders, transmissions, steering and coolant.

Product code: CKBA5132

Impact deep socket set 1/2", 3pcs

Impact deep socket set 1/2", 3pcs is a 3-piece set designed for loosening and tightening wheel nuts on light alloy wheels.

Product code: RT-010K

1/2" Deep Air Impact Socket Set, 13pcs

This comprehensive set features 13 robust sockets meticulously crafted from CR-MO material, renowned for its exceptional strength and durability.

Product code: RT-013K

Impact deep socket set 1/2", 16pcs

This comprehensive set features 16 robust sockets meticulously crafted from CR-MO material, renowned for its exceptional strength and durability.

Product code: RT-016K

Impact socket set 1", 10pcs

This tool is an impact socket set a collection of sockets specifically designed for use with impact wrenches or power tools.

Product code: RT-021K

KM10 socket wrench for unscrewing the wheel hub nut of the Mercedes G class

The socket wrench is specifically designed for the precise and safe removal and installation of the wheel hub nuts of Mercedes G class cars. With its dimensions and design, the socket wrench ensures an optimal fit with the wheel hub nuts, allowing them to be handled quickly, easily and without damage.

Product code: W0504

Flanging and Punch tool

The Flanging and Punch tool can make 10mm flanges and 6mm diameter holes on steel and aluminum plates. With PVC non-slip cover.

Product code: MG04C1007

Transmission fluid and engine oil level gauge (dipstick) set

Transmission fluid and engine oil level gauge (dipstick) set for Mercedes vehicles. Engine oil dipstick 930mm, transmission fluid level gauge 920, 1220mm.

Product code: MG50931

Special wrench for turbocharger

Special wrench for turbocharger, 3/8", 12-pt, size: 12mm

Product code: MG50800

Timing tool set for Peugeot

1.0, 1.1, 1.4, 1.6, 1.8, 1.9, 2.0 and 1.6, 1.8, 2.0, 2.2 16V (Turbo, Twin cam.) petrol, 1.4, 1.5, 1.7, 1.8, 1.9, 2.1, 2.5 D,TD,TDI, 1.4, 1.6, 2.0, 2.2 HDI

Product code: MG50685

Adjustable camshaft pulley holder, length 420mm

For tensioning or loosening the belt pulleys, adjustable opening 12-150mm.

Product code: MG50673

Oil drain pan, 15l

Oil drip tray is constructed of high quality, recyclable polythene plastic that is resistant to corrosion so your oil pan will remain durable for carrying oil, gasoline, and antifreeze. 450mm x 145mm

Product code: DK-230533-15

Timing tool set for VAG 1.2 TFSI

For 1.2 TFSI engines manufactured from 2010, crankshaft, camshaft locking tools.

Product code: MG50661

Camshaft timing tool set for BMW, N42, N46, N46T

Camshaft timing tool set for BMW, N42, N46, N46T

Product code: MG50659

Timing tool set for Ford, Mazda

Camshaft and crankshaft locking tool for 1.25-2.0 diesel and petrol engines

Product code: MG50658

Timing tool set for GM, Opel, 16V 1.6 and 1.8 engines

Alfa Romeo: 159, Chevrolet: Aveo, Cruze, Orlando. Fiat: Croma, Opel: Corsa, Astra G, Astra H, Meriva A, Zafira B, Vectra C, Signum

Product code: MG50651

Injector nozzle extractor set

Injector nozzle extractor set, bridge puller, for PSA 2.0 HDI engines (Peugeot, Citroen), PSA 2.0 JTD (Fiat, Lancia), bridge puller, puller 10, 25, 29mm, pin M25x1P, M17X1P. Suitable only for 8 valve engines.

Product code: MG50638

Timing tool set for Alfa Romeo, Fiat, Lancia

For Alfa Romeo, Fiat, Lancia 1.4, 1.6, 1.8, 2.0 engines

Product code: MG50632

Timing tool set for Alfa Romeo, Fiat, Lancia

For Alfa Romeo 1.4, 1.6, 1.8, 2.0, 3.0 4-cylinder engines. Fiat, Lancia 1.2, 1.4, 1.6, 1.8, 2.0

Product code: MG50631

BMW Common Rail injector puller set

Allows to remove the injector without disassembling the cylinder head. For BMW M47TU, M57, M57TU engines.

Product code: MG50630

Timing tool set for Renault

Timing tool set for Renault 16v engines. Laguna, Safrane, TDC 2.0, 2.5 16v 1996-2001

Product code: MG50620

Timing tool set for Ford

1.25, 1.4, 1.6, 2.0, 2.3, 1.6 v16, 2.0 RS, 1.6 Ti-VRC, 1.8 SCi, 2.0 ST 150, 2.0 XHR petrol, 1.8 TDdi, 1.8 TD, 1.8, 2.2, 2.2 TDCI engines. 1.6 Ti-VCT, 2.0 TDCi engines, Focus, C-Max.

Product code: MG50619

Timing tool set for VAG

For 1.6, 2.0 TDi CR, fifth generation Common Rail diesel (Blue Motion) engines.

Product code: MG50618

Timing tool set for VW

Timing tool set for VW, 2.5TDI PD, 4.9 D/TDI PD

Product code: MG50617

Tensioner pulley wrench for VW, Audi 32mm

Tensioner pulley wrench for VW, Audi (32mm) 2.5 TDi, Sdi engines

Product code: MG50615

Timing belt tension meter

A two-sided scale allows measurements to be made from either side, showing the tension in Nm

Product code: MG50607

Universal silent block remover/installer set, 34-72mm, 44-82mm

Our universal silent block remover/installer set makes extracting and installing silent blocks, hydraulic bearings, and more a breeze! With spindles and press adapters in various sizes, this set is perfect for any job.

Product code: MG50605

Injection nozzle socket set

25, 27, 28, 29, 30mm Siemens, Bosch, for Peugeot and Citroen 2.0 HDI engines

Product code: MG50604

Timing tool set for VW, Audi, Skoda, Seat

Timing belt tensioner, upper dead centre measurer, camshaft locking tool, for VW 1.4, 1.6 FSI, 1.8 Turbo, 1.8 V16, 1.8 Cupra R petrol engines

Product code: MG50603

Cooling system pressure tester

For coolant leakage testing, cleaning, pressure testing (measuring range 0-2.5 bar), 17 caps, radiator cap adapter. Suitable for coolant change and refilling.

Product code: MG50508

Pneumatic brake fluid exchanger, 0.75l

For draining and filling in oil, bleeding, suitable for cars, motorcycles. Accurate and quick operation.

Product code: MG50445

Axial joint tool, 33-42mm

High-quality axle joint installation tool, specially designed for quick and efficient removal and installation of vehicle axle joints. Thanks to its 1/2" drive, the tool is easy to use with many manual and pneumatic wrench systems.

Product code: MG50443

Ball joint separator tool set, replaceable heads, 20, 22, 24, 27, 30mm

Ball joint and tie rod separator tool set, capacity 20, 22, 24, 27, 30mm

Product code: MG50436

Wheel Bearing tool VW

Bearing installation and removal tool for 85mm bearings. Application Volkswagen Touareg, Transporter, Multivan & T5

Product code: MG50432A

Wishbone lever tool, sliding type, lockable at 5 points

The device helps to ensure that the swingarms are stably and securely fixed, only they are maintained or installed.

Product code: MG50417

Rear bush installation tool, for VW, Audi

Rear bush installation tool, for VW: Golf IV, Bora 1.4, 1.6, 1.8, 2.0, 1.9D (01-03), Audi: A3

Product code: MG50412

Vacuum/pressure test kit

Vacuum range 0-1bar, pressure 0-3bar, tank (2x120ml), hose 600mm, couplers, adapters

Product code: MG50411

Front wheel drive kit, 55.5-91mm, axle 380mm

Sizes(d) 55.5, 59, 62, 65, 66, 71.5, 73, 78, 84, 86, 91mm, axle 380mm

Product code: MG50405

Alternator tool set, 24pcs

Alternator tool set, 24pcs

Product code: MG50398

Timing tool set for BMW, N52, N53, N54, 2.5, 3.0 engines

BMW, N51, N52, N53, N54, camshaft, flywheel locking tools, camshaft sensor setting tool, for 2.5, 3.0 6-cylinder DOHC 24V double Vanos aluminium/magnesium alloy petrol engines

Product code: MG50393

Timing tool set for VW, Audi, Skoda, Seat

Timing tool set for VW, Audi, Skoda, Seat, 2.0 FSI, TFSI 1.8 V16. 1.8 Cupra R petrol, 1.4, 1.9, 2.0 TDI PD engines

Product code: MG50392

Timing tool set for BMW, Mini, PSA

BMW Mini camshaft, flywheel locking tools, timing chain tensioner, for 1.4, 1.6 V16 petrol engines

Product code: MG50390

Timing tool set for Chrysler, Jeep and LDV

For 2.5 és 2.8 CRD timing belt engines, Chrysler, Jeep and LDV.

Product code: MG50386

1/2" impact XZN bit socket set for VW brake calipers

1/2" impact XZN bit socket set for VW Transporter, LT M14 (length 43, 78mm), Golf M18 (length 43, 78mm), Sharan M16 (length 43, 78mm)

Product code: MG50385

M16 XZN bit, for transmission fluid drain plugs, brake calipers

M16 XZN bit, for Brembo back brake calipers VW Tuareg, Audi Q7. For cylinder head screws and drive chain parts for several German vehicle types (Audi, BMW, Mercedes, VW)

Product code: MG50383

Timing tool set for Mercedes-Benz, Chrysler, Jeep

Flywheel and camshaft locking tool, for petrol and diesel, 2.2, 2.7 CDI engines

Product code: MG50378

Timing tool set for Ford

For 1.25, 1.4, 1.6, 2.0, 2.3, 1.6 v16, 2.0 RS, 1.6 Ti-VRC, 1.8 SCi, 2.0 ST 150, 2.0 XHR petrol, 1.8 TDdi, 1.8 TD, 1.8, 2.2, 2.2 TDCI engines

Product code: MG50375

Timing tool set for BMW, Land Rover

Camshaft, crankshaft locking tools, timing belt tensioner, injection pump puller, chain tension setting tool, for 4- and 6-cylinder 2.0D 16V, 1.8, 2.0, 2.5, 3.0D, 5.2 TD, TDS engines

Product code: MG50374

Timing tool set for Fiat, Ford

For 1.2 and 1.4 8V petrol engines

Product code: MG50372

Ribbed belt remover and installer tool set, universal

Effortlessly remove and install ribbed belts with our universal tool set. Includes two tools - one for installation and one for removal. Compatible with Alfa Romeo, Audi, BMW, Chrysler, Fiat, Ford, Mercedes, Seat, Skoda, Smart, PSA, Volvo, VW. Save time and money.

Product code: MG50370

Timing tool set for VW, Audi, Skoda, Seat

1.2. 1.4, 1.9, 2.0 TDI PD crankshaft pulley locking tool (for oval and round pulley teeth), injection pump locking tool, holding plate for ribbed belt tensioner

Product code: MG50365

Injector removing tool set VAG FSI

Injector removing tool set VAG FSI

Product code: MG50363

Common rail diesel high pressure tester kit

Our Common Rail Diesel High Pressure Tester Kit is an essential tool for accurately measuring high pressure fuel circuits in diesel common rail systems. With a safety release of 1500bar, it includes a 2000bar dial gauge, high pressure flexible hoses, adapters, screws, and holding bottle. Perfect for engine pressure tests, pump pressure tests, regulator tests, and injector leakage tests.

Product code: MG04A3100D

Universal Clutch Aligning Tool Kit, 17pcs

Universal Clutch Aligning Tool Kit for centering the clutch plate. The 16 cones make it possible to center clutch discs of different sizes. Using a centering kit helps to extend the life of the clutch and ensure reliable operation.

Product code: MG50362

Injector nozzle extractor set for Mercedes-Benz, Chrysler

Mercedes C-Class, E-Class, Sprinter (611, 612, 613) Chrysler Grand Cherokee 27crd (00'-)

Product code: MG50357

Timing tool set for VW, Audi

Crankshaft locking tool, camshaft locking tool, panel removal tool, shock absorber tool, ribbed belt tensioner, for 2.8 V30, 2.7 Turbo, 4.2 V40, 4.2, 5.2 FSI, 2.4, 2.6, 2.7, 2.8, 4.2, 6.0 petrol engines, 2.5, 2.7, 3.0 TDI, 3.0 TDI CR

Product code: MG50356

Front suspension bush tool set for VW

Ensures easy and safe removal and installation directly in the car, without dismantling. For VW Polo, Audi A2, Skoda Fabia, Seat Cordoba/Altea.

Product code: MG50351

Injector puller tool set, with slide hammer

Injector puller tool set, with slide hammer. For Delphi, Bosch, Denso, Siemens injectors

Product code: MG50348

VAG injector puller set, SDI, TDI (PD)

Suitable for 1.4 SDI, TDI, 1.9D, SDI, TDI (PD), 2.0TDI (PD), 2.5 TDI, 2.5 TDI (PD), 2.8TDI (PD), 2.7 TDI, 3.0 TDI

Product code: MG50347

Timing tool set for Opel, Nissan, Dacia, Renault

2.2, 2.5 DCI, DTI Renault, 2.2 16V petrol engines

Product code: MG50345

Timing tool set for BMW, N47, N47S

BMW, N47, N47S, camshaft, flywheel locking tools, crankshaft pulley holding tool, injection pump locking tool, for 4-cylinder straight 2.0 TD engines

Product code: MG50344

Timing tool set for Volvo

For 4-, 5- and 6-cylinder Twin Cam (except the 3.2l) engines

Product code: MG50340

Injector seat cutter tool set, 5 reamers

Flat and angled reamers for Mercedes-Benz CDI, Delphi, Bosch (BMW, PSA, Renault, Ford), Bosch (Mercedes-Benz CRD), Fiat, Iveco, T-handle, pilot post

Product code: MG50337

Timing tool set for Fiat

For Twin Spark 1.4, 1.6, 1.8, 2.0 16V double camshaft engines

Product code: MG50327

Timing tool set, for BMW, N42, N46, N46T

Timing tool set for BMW, NN42, N46, N46T

Product code: MG50326

Timing tool set for Ford

For 2.0, 2.2, 2.4 TDDI, TDCI, engines with timing chain

Product code: MG50325

Oil drain plug repair kit M13, M15, M17, M20

This repair kit is designed to quickly and effectively restore damaged or worn threads. The kit includes 5 oil pan bolts in four different sizes, so it can be used to repair a wide range of vehicles and applications. Each screw is made according to the strictest quality requirements, guaranteeing a long service life and reliable use.

Product code: MG50324

O2 sensor and injector nozzle socket set, 7pcs

O2 sensor and injector nozzle socket set, 1/2": 29X90mm, 27X82mm (12-point), 22X50mm, 3/8": 7/8"X90mm, 1-1/16"X74mm, 7/8"X80mm, 22X31mm

Product code: MG50323

O2 sensor and injector nozzle socket set, 4pcs

O2 sensor and injector nozzle socket set, 8x78mm (12-point): Alfa Romeo, Fiat, Rover, Opel, 27X82mm (12-point), 22x80mm (12lapos), 22x108mm (6-point)

Product code: MG50322

Timing tool set for Opel, Fiat

Camshaft, twin camshaft, flywheel locking tools, for 1.0, 1.2, 1.4, 1.6 CNG, V16, 1.8i, V16, 2.0 OPC, VXR, 2.2 petrol, 1.7 D, TD, 1.3, 1.9 D, TD, JTD, CDTi, DDIS, 2.0, 2.2 TD, TiD, TDi 2.4JTD engines

Product code: MG50321

Camshaft gear puller for Ford

Camshaft gear puller for Ford

Product code: MG50320

Timing tool set for Fiat

Timing tool set for Fiat, 1.2 1.4 1.6 1.8 16V petrol, 2.4 V10, V20 JTD, 2.0, 2.1 TD engines

Product code: MG50318

Timing tool set for VW, Audi

For 2.8 V30, 2.7 Turbo, 4.2 V40, 4.2, 5.2 FSI, 2.4, 2.6, 2.7, 2.8, 4.2, 6.0 petrol, 2.5, 2.7, 3.0 TDI, 3.0 TDI CR engines, crankshaft, camshaft locking tools

Product code: MG50316