Key arm pivot cap Citroen / Peugeot 305/405/605/607 (hardened)
Product code: W0289
Brand: Lincos
Product description
Product packing
| Pack number | Dimensions | Weight |
|---|---|---|
| 1 | 15 x 15 x 6 cm | 0.8 kg |
Delivery fee
| Delivery method | Gross price |
|---|---|
| Pickup in Nagytarcsa | 0,00 € |
| Pickup in Debrecen | 0,00 € |
| DHL Worldwide Express | 67,48 € |
More products in this category
Timing tool set for Alfa, Fiat, Opel 1.7, 1.9, 2.0 TD/JTD, 2.4 JTD
Timing tool set for Alfa Romeo, Fiat, Opel, Saab, Lancia 1.7, 1.9, 2.0 TD/JTD, 2.4 JTD
Product code: W0035
Puller arm forward bushing Renault Laguna I (under a hydraulic press)
Puller arm forward bushing Renault Laguna I (under a hydraulic press) (nr. oe 77 00 822 503)
Product code: W0170
Puller arm forward bushing Renault Laguna I
Puller arm forward bushing Renault Laguna I (nr. oe 77 00 824 042)
Product code: W0171
Rear beam bushing puller BMW E32 / E34 (nr. oe 3331112670)
Rear beam bushing puller BMW E32 / E34 (nr. oe 3331112670)
Product code: W0181
Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot
Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot
Product code: W0195
Crankshaft lock BMW, Mini B37 B38 B47 B48 B58
Product code: W0607
Denso injector adapter puller M20x1 (hardened)
Product code: W0639
Fuel filter wrench for Ford Transit 2.2 TDCI
Fuel filter wrench for Ford Transit and Tourneo 2.2 TDCI.
Product code: W0625
Locking balancing shafts Citroen, Peugeot, Ford, Land Rover 2.2
Product code: W0611
Fuel filter key for Volvo S60, V50, XC90, S80, C30, C70 engines
The diesel fuel filter wrench is for the removal and installation of the fuel filter on Volvo diesel engines.
Product code: W0593
Lock timing Mercedes M112 / M113
Product code: W0591
Short bolt M12 L 150 mm / used in sleeve pullers
Product code: W0530
Lock timing Mercedes M271: E18ML DE18ML E16ML Gasoline compressor
Product code: W0555
Lock timing Jeep Grand Cherokee CRD; Grand Cherokee Multijet 3.0 CRD V6
Product code: W0563
Locking pin for Renault and Nissan 1.6 DCI R9M timing locks
Locking pin for Renault Megane, Scenic, Grand Scenic, Nissan Qashqai , Qashqai 2, 1.6 DCI R9M engine timing tool.
Product code: W0553
Puller injectors Fiat Opel 1.9 JTD; CDTI
Product code: W0551
Puller Injectors Chrysler Voyager 2.5; 2.8 CRD
Product code: W0538
Puller adapter for Denso M25x0.5 Toyota and Mazda injectors
Puller adapter for Denso M25x0.5 Toyota and Mazda injectors
Product code: W0534
Silent puller for VW, Audi, Seat, Skoda engines and gearboxes
Allows the replacement of engine and gearbox silent blocks in VAG engines.
Product code: W0521
Puller sleeve back beam (middle) BMW 5 (E 60, E61) BMW 6 (E63, E64) (oem 33176770825)
Product code: W0520
Key for setting the crankshaft Fiat; Opel 1.3 CDTI
Product code: W0512
Puller hub bearing the brake disc Ford Transit
Product code: W0500
Key oil filter Fiat, Opel, Alfa Romeo 1.3, 1.6, 1.9. 2.0 - 75.3 x 16 hexagonal
Product code: W0484
A key for locking the pulley shaft Opel / Renault
Product code: W0495
Puller sleeve rear beam back Bmw Series 5,6,7 / F 10, F11, F12, 13, F01 (33 31 6775792, 33 31 6 793 864)
Product code: W0490
Lock crankshaft BMW 1.6 / 2.0 / 3.0 - N47 / N57
Product code: W0489
Lock Timing BMW 2.5 / 3.0 Petrol; Engines N51, N52, N52K, N53, N54 (timing chain)
Product code: W0382
Lock belt pulley shaft Ford 1.6
Product code: W0459
A/C clutch hub removal tool, 21mm (hardened)
Fits universally for Audi, BMW, Mercedes-Benz, Porsche, Smart, Volkswagen, Skoda, Seat, Cadillac, Chevrolet, Vauxhall, Ford, Dodge, Jeep, Alfa Romeo, Fiat, Lancia, Opel, Suzuki, Peugeot, Citroen, Renault, Mitsubishi, Toyota, Puch, Proton, Hyundai, etc. models and makes.
Product code: W0445
Adapter / puller injector BMW 1.8 / 2.0 N47
Product code: W0443
Tool to block the balance shafts BMW N40, N42, N45, N46
Product code: W0417
Lock, pin, shaft Ford 1.8 / 2.0
Product code: W0413
Set for knocking injectors Opel Renault 2.0 DCI / CDTI and others (hardened)
Product code: W0389
Universal fuel pump wrench 45-190mm
Universal fuel pump wrench 45-190mm.
Product code: W0387
Lock camshaft BMW N43 1.6, 2.0 (B16, B20 - on the chain)
Product code: W0347
Timing lock for Citroen, Peugeot 1.8, 2.0 16V engines
Timing lock for Peugeot and Citroen gasoline engines 1.8 16V, 2.0 16V and 2.2 16V manufactured starting from 1999.
Product code: W0346
Timing lock for Ford, Mazda petrol Zetec engines
Camshaft locking bar and 3 pins. For 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V and 1.8 TDI petrol engines.
Product code: W0333
Lock injection pump Renault, Volvo, Opel 1.9 D / TD (brass)
Product code: W0319
Timing tool set Fiat Coupe/Barchetta, Lancia, Alfa 1.8 16V (Grey)
Timing tool set Fiat Coupe/Barchetta, Lancia, Alfa 1.8 16V (Grey)
Product code: W0272
Timing tool for Audi, VW 3.3, 3.7, 4.2 A6 A8
Timing tool for Audi, VW 3.3, 3.7, 4.2 A6 A8.
Product code: W0270
Timing tool set, Renault, Nissan, Opel, 1.6 16V engines
Timing tool set, Renault, Nissan, Opel, 1.6 16V engines.
Product code: W0260
Timing tool set Chevrolet, Opel Antara 2.0 Diesel common rail
Timing tool set Chevrolet Nubira, Evanda, Captiva, Opel Antara 2.0 Diesel common rail
Product code: W0256
Timing tool set Fiat Bravo, Brava, Marea, Lancia Delta, Debra 1 set
Timing tool set Fiat Bravo, Brava, Marea, Lancia Delta, Debra 1 set. - Petrol 1.8 16V 115 PS (green)
Product code: W0240
Wrench for injection pumps, hexagon 13mm
Wrench for injection pumps, hex 13mm, drive diam. 12mm, 9x7mm rectangular fixing, hardened
Product code: W0234
Timing tool set Audi A8 3.7 / 4.2 V8 (engine ABZ, AEW, AHC)
Timing tool set Audi A8 3.7 / 4.2 V8 (engine ABZ, AEW, AHC)
Product code: W0227
Adapter for injector pulling Opel DTI - diesel
Adapter for injector pulling Opel DTI - diesel
Product code: W0226
Adapter for injector pulling Opel Vivaro 2.0 CDTI - hardened
Adapter for injector pulling Opel Vivaro 2.0 CDTI - hardened
Product code: W0225
Injector puller DTI Opel - Diesel common rail
Injector puller DTI Opel - Diesel common rail
Product code: W0221
Injector puller Opel Vivaro 2.0 CDTI
Injector puller Opel Vivaro 2.0 CDTI
Product code: W0220
Timing tool set VW LT 2.8 TDI
Timing tool set VW LT 2.8 TDI + special wrench for the camshaft
Product code: W0189
Timing tool set VW Transporter / Touareg / Phaeton, 2.5 TDI PD
Timing tool set VW Transporter / Touareg / Phaeton, 2.5 TDI PD
Product code: W0199
Puller arm sleeve Volkswagen T5 - rear arm
Puller arm sleeve Volkswagen T5 - rear arm
Product code: W0191
Timing tool set Alfa Romeo 1.8 / 2.0 16V, 2.0 TS (blue)
Timing tool set Alfa Romeo 1.8 / 2.0 16V, 2.0 TS (blue)
Product code: W0169
Universal puller small metal-rubber sleeve
Universal puller small metal-rubber sleeve. Length: up to 54, external diam. 34mm, internal diam. 24mm
Product code: W0167
Oil drain repair cutter, Volkswagen
Oil drain repair cutter, Volkswagen
Product code: W0166
Timing tool set for Renault 2.0, 2.3 DCI and CDTI
Timing tool set for Renault, Nissan, Opel 2.0, 2.3 DCI and CDTI
Product code: W0153
Timing tool set Renault Laguna, Megane II 2.0 IDE F5R
Timing tool set Renault Laguna, Megane II 2.0 IDE F5R
Product code: W0152
Adapters for press, puller for bolts VW T4, LT, Mercedes Sprinter
Adapters for press, puller for bolts VW T4, LT, Mercedes Sprinter
Product code: W0147
Key to the wheel hub assembly Mercedes, inner diam. 55mm
Key to the wheel hub assembly Mercedes, inner diam. 55mm
Product code: W0146
VCT alignment tool for Ford 1.6 Ti-VCT Focus, C-Max
VCT alignment tool for Ford 1.6 Ti-VCT Focus, C-Max. Engine code: HXDA. OEM: 303-1097.
Product code: W0127
Press for dismantling and mounting of lower bolts, IVECO
Press for dismantling and mounting of lower bolts, IVECO
Product code: W0115
Wrench for injection pumps, hexagon 14mm
Wrench for injection pumps, hexagon 14mm, guidance diam. 9mm, triangular fixing
Product code: W0112
Wrench for injection pumps, hexagon 15mm
Wrench for injection pumps, hexagon 15mm, guidance diam. 15mm, rectangular fixing
Product code: W0111
Sleeve puller, rear beams FIAT Panda 2003-
Sleeve puller, rear beams FIAT Panda 2003-
Product code: W0107
Adapters for press, puller for bolts, Master, Movano, Interstar
Adapters for press, puller for bolts, Renault Master, Opel Movano, Nissan Interstar
Product code: W0098
Press, puller for bolts of suspension arm Master/Movano/Interstar
Press, puller for bolts of suspension arm Master/Movano/Interstar (upper and lower)
Product code: W0100
Wrench for rim unscrewing, ABS Renault Maskot, Master
Wrench for rim unscrewing, ABS Renault Maskot, Master
Product code: W0095
Injector puller adapter, VW TDI PD
Adapter for injector pulling, VW TDI PD.
Product code: W0094
Puller for suspension arm sleeves – front, BMW E 39 M5
Puller for suspension arm sleeves – front, BMW 5 (E39), 01.96-06.04 535i/540i/M5 BMW 7 (E38), 04.94-12.01
Product code: W0086
Valve sealing install set, 6mm, 7mm, 8mm, universal
Valve sealing install set, 6mm, 7mm, 8mm, universal
Product code: W0059
Press, puller for bolts, Renault Master, Opel Movano
Press, puller for bolts, Renault Master, Opel Movano
Product code: W0045
Tool for setting the upper dead point of the piston Fiat, Alfa, Lancia
Tool for setting the upper dead point of the piston Fiat, Alfa, Lancia
Product code: W0041
Timing tool set, VW, Seat, Skoda 1.2 6V and 12V
A set of timing locks for 3-cylinder VW Seat Skoda 1.2 6/12V (chain driven) engines.
Product code: W0031
Timing tool set 1.4 1.6 FSI VW/AUDI/SKODA
Timing tool set 1.4 1.6 FSI VW/AUDI/SKODA
Product code: W0026
Timing lock set for Renault, Nissan, Opel and Dacia
Timing lock Renault 1.4, 1.6, 1.8, 2.0 16V dCI gasoline enginesand 1.5 diesel engines.
Product code: W0011
Hex key for Bosch injector valve
H10 hex wrench with a 7.5mm hole for disassembly of Bosch injector valves.
Product code: C04/0087
Fish tape, 30m, red
30m steel cable fish tape in plastic red case. Flat metal tape, size 3x1mm. Insertion head size 40x10x3mm.
Product code: FT100-RED
Car mini bladed fuse set, 140pcs
Car mini bladed fuse set, 140pcs
Product code: G02825
Press the down crossover pins Jeep Cherokee, Grand Cherokee, Wrangler
Product code: W0399
Timing chain and camshaft locking tool set for Mercedes engines
This timing chain and camshaft locking tool set is to be used on M271, DE18ML, E16ML, DE18LA, 4 cylinder, 2003-2005 Mercedes engines.
Product code: MG04A2121
Rear Suspension Bush Puller Ford Mondeo
Rear Suspension Bush Puller Ford Mondeo
Product code: W0020
Fish tape, 30m, green
30m steel cable fish tape in plastic green case. Flat metal tape, size 3x1mm. Insertion head size 40x10x3mm.
Product code: FT100-GREEN
Tube flaring set 3-19mm
Tube flaring set for tubes with diameters: 3, 5, 6, 8, 10, 12, 15, 16, 18, 19mm.
Product code: G02720
Puller sleeve front beam Renault Laguna II / Trafic II (oe sleeves 8200000512)
Product code: W0368
Pin to the crankshaft Ford Fiesta 1.25, 1.4, 1.6 Zetec, Duratec
Product code: W0406
Adapters to bolts down Jeep - Cherokee, Grand Cherokee, Wrangler
Product code: W0398
Universal socket adapter 7 to 19mm diameters
Universal socket adapter. For nuts and bolts with 7 to 19mm diameters.
Product code: G15021
Lock Flywheel Renault 1.2 / 1.6 Petrol, 1.9 D / TD
Product code: W0327
Timing lock set for Ford 1.0 EcoBoost (Fox) LT
Ford timing lock for 1.0 Eco Boost (Fox) LT engines from 2018.
Product code: C01/0229
Renault and Peugeot rear axle bush remover and installer
Designed for the removal, installation and alignment of rear axle bushes on Renault Laguna II and Peugeot 207.
Product code: C02/0094
Lock Belt VW / Audi / Seat / Skoda 1.8 FSI / TFSI
Product code: W0317
Oil drain pan 10L
A container ideal for the recovery of oil and antifreeze liquids.
Product code: G02634
Tube flaring tool set with pipe cutter
Tube flaring tool set with pipe cutter. For tube sizes: 5, 6, 8, 10, 12, 14, 18mm.
Product code: G02722
Wiper arm puller
Wiper arm puller. The puller is used to remove car wiper arms. Made of durable chrome-molybdenum steel.
Product code: G02770
14pcs E4-E24 Torx socket set
14pcs E4-E24 Torx socket set. Use with 1/2", 3/8", 1/4" drives.
Product code: G13566
Press the king pins the upper and lower Jeep - Cherokee, Grand Cherokee, Wrangler
Product code: W0401
Puller for wheel hub / bearing VW Polo, Seat, Skoda, Audi A2-puller with ABS and without ABS
Product code: W0306
Camshaft, crankshaft and chain locking tool for BMW, Mini 1.4 and 1.6 16V
Camshaft, crankshaft and chain locking tool for BMW, Mini with 1.4 and 1.6 16V engines.
Product code: C01/0115
Timing lock for Ford, Fiat, Citroen, Peugeot 2.2 TDCI engines
Timing lock for Ford, Fiat, Citroen, Peugeot 2.2 TDCI engines.
Product code: C01/0179
Oil funnel with built in filter
Oil funnel with built in filter and flexible hose. Dia.: 140mm
Product code: G02150
Hook and pick set, 9pcs
Hook and pick set for removing oil seals, o-rings and gaskets
Product code: G02708
Hook and pick set 6pcs (Lenght: 240mm)
Hook and pick set for removing seals, O-rings and gaskets.
Product code: G02706
5pcs strut nut tool set for Audi, VW and Mercedes
A set of nut tools for tightening and loosening shock absorber mounts.
Product code: G02785
Car non-insulated terminal connector set, 750pcs
Car non-insulated terminal connector set, 750pcs
Product code: G02828
Puller for wheel hub / bearing Ford Focus II, C-Max, Volvo, Mazda 3,-puller with ABS and without ABS
Product code: W0305
Sleeve puller for Opel rear beams
Rear bushing puller for Zafira B, Astra H, Meriva. For the assembly and disassembly of sleeves in cars.
Product code: W0372
Rear beam silent puller for Renault Laguna III and Laguna Coupe
Rear beam bushing puller for Renault Laguna III and Laguna Coupe. OEM: 55 04 400 01R, 55 04 466 24R, 55 04 500 01R.
Product code: W0503
Oil filter wrench for Toyota, Lexus, Scion, 80mm
Oil filter wrench for Toyota, Lexus, Scion, Daihatsu, Subaru, Pontiac cartridge oil filters, 80mm.
Product code: W0687
Adapter set for pulling Bosch injector M17x1
Adapter set for pulling Bosch injector M17x1.
Product code: W0596
Fish tape, 60m, red
60m steel cable fish tape in plastic red case. Flat metal tape, size 3x1mm. Insertion head size 40x10x3mm.
Product code: FT200-RED
Two jaw gear and bearing puller. Operating range: up to 200mm
Two jaw gear and bearing puller with adjustable clamping depth and width. For both internal and external bearings.
Product code: G02202
Bearing and gear puller with 3 jaws. Working range: up to 4" (102mm)
Bearing and gear puller with 3 jaws. Working range: up to 4" (102mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.
Product code: G02242
Ball joint and silent block remover/installer set
Suitable for any passenger car, utility trucks and SUV vehicles, in which the ball joints have an interference fit. The tools allow for easy removal and installing without large-scale demounting.
Product code: MG50042
Universal bearing removing/installing kit, 34-84mm
Spindle: M10xP1.5, M12xP1.75, M14xP2.0, M16xP2.0, length/Ø A 44/34, 46/36, 54/44, 56/46, 58/48, 66/56, 68/58, 70/60, 78/68, 80/70, 84/72, B 48/38, 50/40, 52/42, 60/50, 62/52, 64/54, 72/62, 74/64, 76/66mm
Product code: MG50093
Front wheel drive kit, 55.5-91mm, axle 380mm
Sizes(d) 55.5, 59, 62, 65, 66, 71.5, 73, 78, 84, 86, 91mm, axle 380mm
Product code: MG50405
Piston ring compression set
Piston ring service tool set for install piston rings; 3 pcs piston ring plates/compressors; 1 piston ring expander; Piston ring groove cleaner; 3 blades
Product code: JBM53251
Valve lapping tool set for drills, 6pcs
This tool smoothens the surfaces of new valves, ensuring that they fit firmly into the cylinders. Suction cup diameters: 16, 20, 30, 35, 40mm.
Product code: JBM54033
Valve stem seal pliers
For replacing valve stem seals.
Product code: MG50106
Bearing separator set
Bearing separator set, capacity 30-50mm, 50-75mm, 2 separators, 1 forcing screw, 4X2 extensions
Product code: MG50132
Brake cylinder wind-back tool
Brake cylinder wind-back tool, for Audi, Ford, Honda, Jaguar, Mazda, Mitsubishi, Nissan, Rover, Saab, Subaru, Toyota, VW
Product code: MG50407
Viscous clutch wrench Mercedes Sprinter 906 218, 318, 418, 518 CDI
Viscous clutch wrench Mercedes Sprinter 906 218, 318, 418, 518 CDI
Product code: W0239
Puller sleeve rubber front, rear sleds BMW Series 5, 6, 7 (33316775781, 33316792873)
Product code: W0444
Timing belt tightener for VAG car engines
Timing belt tensioner wrench for VAG car engines.
Product code: W0039
Slide hammer M12/16, ⌀85mm, weight 1,3 kg
Slide hammer M12/16, ⌀85mm, weight 1,3 kg
Product code: W0048
Puller sleeve rear beam Opel Zafira A; Astra G; Combo; Meriva A (oe number 402644)
Product code: W0371
Glow plug reamer, 9mm, length 175mm
Tool for reaming broken glow plug shafts. Diameter: 9mm. Length: 175mm.
Product code: W0637
Universal puller (screw L=100mm, hole distance 27-62mm)
Universal puller (screw L=100mm, hole distance 27-62mm)
Product code: W0136
Crankshaft front oil seal puller for Iveco 3.0
Crankshaft front oil seal puller for Iveco 3.0
Product code: W0434
Key viscous clutch Ford Transit 2.3 2.4 3.2 (2001 – 2006)
Product code: W0416
Adjustable clutch plate spanner wrench air conditioning
Product code: W0616
Timing lock for BMW M43, M70, M73 engines with timing chain
Timing lock for BMW M43, M70, M73 engines with timing chain.
Product code: C01/0050
Glow plug reamer, 11mm
Tool for reaming broken glow plug shafts. Diameter: 11mm. Length: 11cm.
Product code: W0634
Special wrench for turbocharger
Special wrench for turbocharger, 3/8", 12-pt, size: 12mm
Product code: MG50800
Silent puller for BMW E38, E39, E60, E63, E65, E53, X5, Z8 passanger cars
Extractor for removing and fitting the silent block on the rear axle link arm on BMW passanger cars.
Product code: W0087
Extra feet puller for beam puller (W0033)
Extra feet puller for beam puller (W0033)
Product code: W0150
Press, puller for bolts, 20 adapters Master, Movano, Iveco, Vw Lt etc.
Press, puller for bolts, 20 adapters Master, Movano, Iveco, Vw Lt, Ctrafter, Sprinter
Product code: W0162
Puller arm bushing rear Fiat Bravo II (No.sleeves 50700796 )
Product code: W0377
Puller sleeve rocker back Fiat Doblo 2010 - (oem sleeve FIAT 51930337)
Product code: W0523
The keys for locking the pulley shaft Mercedes M112, M113, M271, M272, M273, M642
Product code: W0604
Puller hub / bearing Mondeo IV; Focus II RS (FORD 1 463 833)
Product code: W0506
Front suspension bush axle beam tool L, R, Opel Astra G, H, Zafira
Front suspension bush axle beam tool Left, Right, Opel Astra G, H, Zafira (nr. oe 352 364)
Product code: W0175
Pin socket wrench arm Citroen / Peugeot 405 (hardened)
Pin socket wrench arm Citroen / Peugeot 405 (hardened)
Product code: W0194
Sleeve puller for Ford Mondeo MK 4 (2007- ) rear swingarm
Tool for assembly and disassembly of the sleeve without the need to disassemble the swingarm.
Product code: W0364
Bearing separator set
Bearing separator set, capacity 30-50mm, 50-75mm, 2 separators, 1 forcing screw, 4X2 extensions
Product code: JBM51125
Windshield wiper puller
Windshield wiper puller, max. diameter 45mm, min. diameter 17mm, simple handling, safe mechanism, design with thin legs and brass-finished ends. Weight 0.2kg.
Product code: JBM52454
Leak tester for cylinder head gasket
CO2 Combustion leak detect. This tool is designed to check for the leaks between combustion and cooling system of water-cooled engines. With 3 adapters.
Product code: MG04A4052
Sleeve and silent puller for BMW 1, 3, X1 rear arms
Sleeve and silent puller for BMW 1 3, X1 Hatchback, Coupe, Convertible, Saloon, Touring rear arms. (OE 33326763092)
Product code: W0587
Brake caliper sockets for Audi Q5, A4, A5
Designed to loosen or tighten brake caliper bolts in Audi vehicles.
Product code: W0552
Sleeve puller, rear beams, BMW E39 sedan
Sleeve puller, rear beams, BMW E39 sedan
Product code: W0096
Clutch centering mandrel, 2pcs
2pcs clutch centering mandrel, Ø20-26mm, Ø15-19mm
Product code: JBM53392
Bearing puller set, 9pcs
It’s ideal for removing small gears, wheels, and fittings from shafts also can be used to replace the steering pump, perfect for wiper arm assembly, rebuilding your alternator, removing tightly fitted pulleys, and reaches places that regular gear pullers can’t access.
Product code: DK-230590
Service wrench for initial chamber 1/2", 60mm
Service wrench for initial chamber 1/2", 60mm
Product code: W0081
Sleeve puller, rear beams BMW E39 (sleeve oe no. 3317 1090 389)
Sleeve puller, rear beams BMW E39 (sleeve oe no. 3317 1090 389)
Product code: W0165
The cap / wrench for loosening the hub nut Land Rover DEFENDER 1999-2016. ( nut number RFD100000)
Product code: W0642
Puller synchronizer gearbox Volvo AT03112C
Product code: W0649
Compression test kit
For passenger cars, utility trucks, measuring range 0-20 bar, hose length 330 mm, quick coupler
Product code: MG50191
Petrol engine compression tester kit
Measuring range 0-21bar, straight extension, angled extension, extension hose, adapters M10x1.0, M12x1.25, M14x1.25, M18x1.5
Product code: MG50192
Clutch alignment tool set, 16 cone adapters
Aligning shaft, 16 cone adapters, for Audi, Citroen, Fiat, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Toyota, VW, Volvo
Product code: MG50362
Vacuum/pressure test kit
Vacuum range 0-1bar, pressure 0-3bar, tank (2x120ml), hose 600mm, couplers, adapters
Product code: MG50411
Timing tool set for Ford, Mazda
Camshaft and crankshaft locking tool for 1.25-2.0 diesel and petrol engines
Product code: MG50658
Rear crankshaft oil seal replacement tool for Iveco 3.0, Mitsubishi Fuso 3.0 Euro 5
Rear crankshaft oil seal replacement tool for Iveco 3.0, Mitsubishi Fuso 3.0 Euro 5
Product code: W0619
Flaring tool kit for brake lines
For making ends of brake lines or copper, copper-nickel and thin-walled steel pipes. Adapters: 4.75, 6.35, 7.95, 9.50, 11.10, 12.70, 15.87mm
Product code: CKB09065
Press for bushings and silents for hydraulic cylinder 12T
Press for pins and bushings without adapters. Can be used with a hydraulic cylinder.
Product code: C02/0149
Hub Puller VW, Seat, Skoda-Puller with ABS and without ABS
Hub Puller VW, Seat, Skoda-Puller with ABS and without ABS
Product code: W0163
Steering rod wrench
Allows the inner tie rod to be removed and installed without removing the rack.
Product code: W0168
Sleeve puller, rear beams BMW E39 (sleeve oe no. 3317 1093 008)
Sleeve puller, rear beams BMW E39 (sleeve oe no. 3317 1093 008)
Product code: W0158
Puller sleeve right front beam Ford Focus II; III; C-Max; Volvo (no oe. 1326988, 4M515L021AB, 1326988, 23033, 30714550, FM-FOC5
Product code: W0370
Tool for setting the GMP Volkswagen 2.5 TDI
Product code: W0374
Adapter puller valve springs 16V
Product code: W0440
Puller hub / bearing Fiat Ducato Citroen Jumper
Product code: W0499
Key to block unscrewing of the pulley Mercedes-Benz M272 / M273 engine
Product code: W0677
Valve-spring compressor tool set
High capacity valve-spring compressor tool, for passenger cars, adjustable rod and arm
Product code: MG50103A
Puller bushings rear beam Renault Laguna II (to no of original sleeves with flat his back)
Product code: W0329
Timing tool set Volvo V 50 16 V 1.8 / 2.0 with chain - petrol
Timing tool set Volvo V 50 16 V 1.8 / 2.0 with chain - petrol
Product code: W0177
Key clutch viscotic Volkswagen Crafter 2.5 TDI
Product code: W0404
Valve-spring compressor tool set
High load capacity valve-spring compressor tool set, for passenger cars, adjustable rod and arm
Product code: MG50103
Hydraulic body repair kit 10t
Hydraulic push and pull rams, capacity 10t, thrust 135mm
Product code: TL0010-2
Universal clutch and clutch drive plate aligning kit
Clutch alingment tool set 16 adapters, 1 shaft.
Product code: CKB04227
Bearing and gear puller with 3 jaws. Working range: up to 6" (152mm)
Bearing and gear puller with 3 jaws. Working range: up to 6" (152mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.
Product code: G02243
Universal press for bolts and sleeves
Universal, strengthened press for bolts and sleeves of trailing arms.
Product code: W0099
Stripper down the front of the arm sleeve, Opel Astra G, H, Zafira, Vectra B
Stripper down the front of the arm sleeve, Opel Astra G, H, Zafira, Vectra B (big tube)
Product code: W0190
10pcs bolt extractor set
Set for removing damaged nuts and bolts with sizes of 9 - 19mm.
Product code: G30032
Bearing and gear puller with 3 jaws. Working range: up to 3" (75mm)
Bearing and gear puller with 3 jaws. Working range: up to 3" (75mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.
Product code: G02230
Exhaust pipe expander
Sizes: 29-44mm (1 1/8"-1 3/4"), 38-62mm (1 1/2"- 2 7/16"), 54-87mm (2 1/8"-3 7/16")
Product code: MG50076
Petrol engine compression test kit, 0-20bar
Suitable for passenger cars and motorcycles, double scale gauge 0-20bar (0-290psi), adapters M10, M12, M14 (64, 94mm), M18
Product code: MG50184
SAC clutch alignment tool set
SAC clutch alignment tool set, ensures quick removal and precise installation. 3- and 4-hole division
Product code: MG50442
Tube double flaring tool set, 10pcs
Tube double flaring tool set, 10pcs, tube sizes: 3/16", 1/4", 5/6", 3/8", 7/6", 1/2", 5/8"
Product code: G02721
Tube bending tool. For diameters: 6-10mm
Designed for bending copper tubes, aluminium tubes and stainless steel tubes.
Product code: G02723
Piston ring compressor 6", 60-175mm
6" piston ring compressor. Ø 60-175mm
Product code: JBM52697
Cam lock Renault 16V / 2.5 20V Volvo 1.6/1.8/1.9/2.0/2.2/2.3/2.4/2.5 (bar)
Product code: W0301
Camshaft Lock Volkswagen Audi 2.6, 2.8 V6 / V8
Product code: W0322
Mercedes-Benz, BMW Visco cooling fan clutch tool set
Special tools for Mercedes Benz, BMW, Ford cooling fan clutches, water pumps
Product code: MG50702
BMW Common Rail injector puller set
Allows to remove the injector without disassembling the cylinder head. For BMW M47TU, M57, M57TU engines.
Product code: MG50630
Wheel Bearing tool VW
Bearing installation and removal tool for 85mm bearings. Application Volkswagen Touareg, Transporter, Multivan & T5
Product code: MG50432A
Ball joint separator tool set, replaceable heads, 20, 22, 24, 27, 30mm
Ball joint and tie rod separator tool set, capacity 20, 22, 24, 27, 30mm
Product code: MG50436
Crankshaft rear oil seal replacement tool for Iveco, Fiat 2.3
Crankshaft rear oil seal (gearbox side) replacement tool for Iveco, Fiat 2.3
Product code: W0438
Key to rotate the crankshaft Volkswagen 2.5 TDI, Touareg, Transporter T5
Product code: W0452
Puller sleeve rear beam Mercedes S Class W220 C215 (oe numbers 220 351 11 42 221 350 01 75)
Product code: W0453
Puller / Press sleeve metal - rubber arm rear longitudinal Honda Civic, CR-V, Concerto, CRX, Rover 200 (OE-sleeve 52385 SR3-000)
Product code: W0485
Oil pressure tester kit, hose with quick couplers, 10 adapters
For oil pump, pressure tester, oil pressure switch testing. Hose with quick couplers, with 10 adapters
Product code: MG50188
Cylinder leakage tester
Quickly determines piston, ring and valve faults. Measuring range 0-7bar (0-100psi), spark plug adapters 10, 12, 14mm
Product code: MG50185
Valve grinder, wooden
Valve grinder, wooden, with suction cups, sizes: 5/8", 13/16", 1 1/8", 1 3/8"
Product code: MG50104
Camshaft lock for Mercedes Benz M642, 3.0 24v V6
Timing lock for Mercedes Benz M642, 3.0, 24v, V6 diesel engines.
Product code: W0600
Timing box cover tools for Ford 1.8 TDCI, TDDI
Timing box cover tools for Ford Focus, C-Max, Tourneo Connect, Mondeo, Transit Connect 1.8 TDCI, TDDI.
Product code: W0635
Viscous clutch key for Mercedes Sprinter 3.0 V6 CDI
Viscous clutch key for Mercedes passenger cars with 3.0 V6 CDI and 4.0 V8 CDI engines.
Product code: W0641
Adapter for pulling the injectors 2.0 HDI Delphi (12mm) ( Delphi 28388960 )
Product code: W0663
Anti-freeze tester
Anti-freeze tester, Measuring range: -43ºC to 131ºC
Product code: JBM53453
Timing tool set, for BMW, N42, N46, N46T
Timing tool set for BMW, NN42, N46, N46T
Product code: JBM53259
Universal belt tensioner wrench set
Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm
Product code: JBM52832
Piston ring compressor 3", 53-175mm
3" piston ring compressor. Ø 53/175mm
Product code: JBM52696
Wheel bearing removal/installation tool set 55.7-88.4mm
Diminishes the possibility of wheel bearing damage during removal and installation. Sizes (d) 55.7, 63.3, 67.8, 70.7, 71.9, 71.7, 72.8, 73.4, 74.7, 77.4, 81.4, 83.3, 88.4mm.
Product code: JBM52551
Wishbone lever tool
Wishbone lever tool, Length: 1180mm, Tube: Ø 3.5cm, Brace distance: 50 - 45 - 40 - 35 - 30cm, Fastening support: 15 x 13cm
Product code: JBM51902
Adapter for testing fuel injection Diesel trucks
Adapter for testing fuel injection Diesel trucks - MAN 0826, 0824
Product code: W0144
Puller for plastic sleeves Skoda Octavia II / VW Touran / Golf V
Puller for plastic sleeves Skoda Octavia II / VW Touran / Golf V (sleeve oe no. 6Q0 407 183)
Product code: W0155
Camshaft locking tool Fiat 1.2 8V
Camshaft locking tool Fiat 1.2 8V
Product code: W0120
Beam puller for timing wheels
Beam puller for timing wheels
Product code: W0033
Press for silents and ball joints, for VW T4, Mercedes Sprinter, VW LT
Press for mounting and removing silents in the suspension arm in VW T4, VW LT and Mercedes Sprinter 1999-2006 without having to remove the arm from the vehicle.
Product code: W0027
Valve spring removal tool for 8V, 12V, 16V engines
Valve spring removal tool for 8V, 12V, 16V engines.
Product code: W0024
Injector puller set 1.5 DCI Delphi (14x1.5) Renault, Nissan
Injector puller set 1.5 DCI Delphi (14x1.5) Renault, Nissan
Product code: W0247
Axial joint puller 35-45mm
Capacity 35-45mm, length 400mm, hex end 27mm (1/2" drive)
Product code: MG50045
6pcs Trim pad removal tool kit
The door trim removes the patents simply and without damaging them. Can be applied to both metal and plastic fastening elements. The upholstery kit has three types of heads with two different lengths.
Product code: MG04C1024
Diesel compression tester kit, with injector, glow plug adapters
For passenger cars, light trucks, for diesel engines with direct injection and combustion chambers, measuring range: 0-70 bar, hose length: 355mm
Product code: MG50181
Oxygen sensor socket set
Sizes: 3/8" drive, 22mm, 6-point, 3/8" drive, 22mm, 6-point, dep, 1/2" drive 22mm, 12-point
Product code: MG50627
Puller injectors Fiat; Citroen; Iveco 3.0 HPI
Product code: W0558
Puller for plastic sleeves, Skoda Fabia, VW Polo
Puller for plastic sleeves, Skoda Fabia, VW Polo.
Product code: W0005
Sleeve puller, Golf IV, Audi A3, Skoda Octavia
Sleeve puller, Golf IV, Audi A3, Skoda Octavia
Product code: W0006
Face mill for crankshaft, VW TDI 1.9, 2.5
Face mill for the crankshafts of VW TDI 1.9, 2.5 engines.
Product code: W0017
Timing tool set, Alfa Romeo, Opel, Fiat, Saab 1.6, 1.9, 2.0, 2.4 JTD CDTI engines
Timing tool set, Alfa Romeo, Opel, Fiat, Saab 1.6, 1.9, 2.0, 2.4 JTD CDTI engines.
Product code: W0034
Wrench for alternator coupler, VALEO-Renault, Volvo (hardened)
Wrench for alternator coupler, VALEO-Renault, Volvo (hardened)
Product code: W0052
Inertial puller for car injectors, HDI
Inertial puller for car injectors, HDI
Product code: W0062
Tool for hub removal (set of 15 screws)
Tool for hub removal – cars of A, B, C class and others. Set of 15 screws.
Product code: W0072
Wrench for damper pin locking/unscrewing, Ducato, Jumper, Boxer
Wrench for damper pin locking/unscrewing, Ducato, Jumper, Boxer
Product code: W0090
Puller for rear beam sleeve, BMW E39 touring
Puller for rear beam sleeve, BMW E39 touring
Product code: W0113
Lock timing Audi 2.8 FSI / FSI 3.2 / 3.0 TFSI
Product code: W0481
Sleeve puller, Citroen C5
Sleeve puller, Citroen C5 (sleeve OE no. 352384)
Product code: W0196
Puller sleeve rear beam (large) for BMW X5 E53, M57 etc.
Puller sleeve rear beam (large) (OE no. 33 31 1 093 662, 33 31 6 770 454) for BMW X5 E53, M57 etc.
Product code: W0251
Camshaft lock for Mercedes 2.0, 2.1, 2.2 CDI
Camshaft lock for Mercedes 2.0, 2.1, 2.2 CDI
Product code: W0386
Wrench for the injection pump of diesel Mercedes Benz engines
Key for MRSF-ERE injection pumps found in Benz diesel engines.
Product code: W0324
Crankshaft locking tool for BMW N12, N14, N40, N42, N45, N46, N52
Crankshaft locking tool for BMW N12, N14, N40, N42, N45, N46, N52
Product code: W0390
Key clutch disc air conditioning Denso 23 mm (hardened)
Product code: W0448
Puller hub bearings Renault Trafic, Opel Vivaro 2.0 DCI
Product code: W0487
Timing lock set for BMW 2.0, 3.0D N47, N47S, N57 diesel (2007 - 2012)
Timing lock set for BMW 2.0, 3.0D N47, N47S, N57 diesel (2007 - 2012).
Product code: W0491
Bearing and silent puller for BMW rear axles
Extractor for the removal and installation of the ball joint bearing on the wheel support of the rear axle on BMW 1, 2, 3, 4, X1, X3, X4, i8 series.
Product code: W0627
Bush, bearing and seal driver set 52pcs
Bush, bearing and seal driver set 52pcs. Discs: 18 - 65mm and 74mm
Product code: CKBB1035
Adapter sleeve (diameter 57mm) for belt pulley wrench for BMW diesel engines
Adapter sleeve (diameter 57mm) for belt pulley wrench for BMW diesel engines.
Product code: C01/0134
Timing lock for BMW N63, N74 and S63 4.4l V8 engines
For setting the timing when changing the timing chain, repairing the cylinder head, replacing the cylinder head gasket, etc.
Product code: C01/0227
Hand held vacuum pump
Accepts many kinds of adapters to fit most types of vehicles. The body has a switch to control two kinds of pressure conditions. Pressure ranges: positive pressure 0-60psi (1-4inhg) and negative pressure 0-30psi (0 to -1inhg).
Product code: CHS-A998A
Internal bearing puller set
Internal bearing puller 10-32 mm. A professional set, necessary in every workshop.
Product code: CKB04004
Drum brake pliers
Drum brake pliers. For removing and installing return springs on drum brakes.
Product code: JBM52625
Transmission oil filling system (ATF)
Transmission oil filling system. Capacity: 7.5l, Outlet: 80cc cycle, Viscosity range up to SAE140. Includes 15 accessories for Ford 1/8 - 27, universal BMW, Honda, Nissan, VW, Audi, Skoda, Porsche, Mini Cooper, Mercedes, Hyundai. Universal and flexible 300mm hose.
Product code: JBM52797
Transmission fluid and engine oil level gauge (dipstick) set, Mercedes Benz/Audi
5pcs transmission fluid and engine oil level gauge (dipstick) set for vehicles Mercedes Benz and Audi. Length: 920 - 930 - 1160 - 1200mm.
Product code: JBM53206
Universal cooling system pressure test kit, 5pcs
This tool has been designed to check for leaks in the car cooling system. The four universal cone adapters fit a wide range of vehicles and cap sizes. (17-24mm, 28-31.5mm, 37-39.5mm, 47-48.5mm)
Product code: JBM54139
Non-marring hook, pick and prying tool set, 6pcs
This set allows you to remove, clean, and work on trim clips, oil seals, grommets, O-rings, air vent assemblies, tight gaps in interior automotive compartments, delicate wiring, composite electrical connectors, and other sensitive finished components.
Product code: JBM54142
Adapter to remove the pins down on the Renault Master 2006
Adapter to remove the pins down on the Renault Master 2006
Product code: W0160
VW Crankshaft sealing flange removing and installing tool (diesel)
Specially designed tool to renew crankshaft sealing flange.
Product code: MG04A1028
Axial joint puller 28-35mm
Capacity 28-35mm, length 400mm, hex end 27mm (1/2" drive)
Product code: MG50045A
Universal puller set
Universal puller set, jaw length 100, 200, 250mm
Product code: MG50131
Air conditioner line tool set
Air conditioner line tool set, sizes 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"
Product code: MG50129
Puller assembly and disassembly sleeve rear beam AUDI A4, A4 Avant 94-01
Product code: W0479
Universal sliding hammer hub puller, with 15 screws
Universal sliding hammer hub puller, with 15 screws
Product code: W0002
Slide hammer, diameter 70mm, weight 0.9kg, length 300mm
Slide hammer, diameter 70mm, weight 0.9kg, length 300mm
Product code: W0060
Puller for belt pulleys, four-arm
Puller for belt pulleys, four-arm
Product code: W0073
Inertial puller for car injectors + attachment, CDI and others
Inertial puller for car injectors + attachment, CDI and others
Product code: W0088
Timing tool set BMW M42, M44 M50, M52, M52TU, M54, M56, S50US & S52US
Timing tool set BMW M42, M44 M50, M52, M52TU, M54, M56, S50US & S52US
Product code: W0159
Timing tool set BMW 2.0d N47 / N47S common rail, diesel
Timing tool set BMW 2.0d N47 / N47S common rail, diesel
Product code: W0180
Injection pump wrench set for Bosch, Lucas etc., 6 pcs special keys
Injection pump wrench set for Bosch, Lucas etc., 6 pcs special keys
Product code: W0235
Lock (adapter; pin) timing Renault 2.0 DCi
Product code: W0344
3 bolts, adapter for locking the volkswagen audi 2.0 – 4.2
Product code: W0492
Camshaft Lock Opel 1.0 / 1.4 SIDI, EcoFlex Turbo Petrol
Product code: W0527
Adapter for loosening stuck M14x1 injectors
Adapter for loosening stuck M14x1 injectors
Product code: W0536
Shaft locking pin for VW TSI, FSI, TFSI engines
Shaft locking pin for VW TSI, FSI, TFSI engines
Product code: C01/0090
AC and fuel line disconnect set
Set for disconnecting fuel and air-conditioning quick connectors.Â
Product code: CKB09042
Fuel pump removal tool
Fuel pump removal tool. Adjustable arms: 89mm - 170mm. Universal use.
Product code: CKBA3067
Bearing and gear puller with 3 jaws. Working range: up to 8" (203mm)
Bearing and gear puller with 3 jaws. Working range: up to 8" (203mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.
Product code: G02233
Wire terminal release set 23pcs
Wire terminal release set 23pcs. For removing terminals from electrical connectors of BMW, Mercedes, VW, Audi, Jaguar, Porsche, Saab, Skoda, Ford, Renault, Citroen, Chrysler, Flat, Honda, Mazda, Mitsubishi, Toyota, Opel, Seat brand cars.
Product code: CKBD2035
Bearing and gear puller with 3 jaws. Working range: up to 12" (305mm)
Bearing and gear puller with 3 jaws. Working range: up to 12" (305mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.
Product code: G02235
Adapter set for gearbox fluid change (ATF)
Adapter set for gearbox fluid change (ATF).
Product code: G02733
Timing lock set for BMW 2.0 - 3.0 petrol engines
Timing lock set for BMW 2.0, 2.2, 2.3, 2.5, 2.8, 3.0 petrol engines.
Product code: C01/0034
Timing lock for Opel and Chevrolet 1.0, 1.2, 1.4
For chain driven petrol engines: 1.0, 1.2, 1.4 liters (2010-).
Product code: C01/0054
Engine timing lock for Ford 2.0 and 2.4 diesel engines
Engine timing lock for Ford 2.0 and 2.4 diesel engines.
Product code: C01/0074
Mini wire cutter
The micro wire cutter can be used to cut copper wire, aluminum wire, zip tie, plastic burrs, jewelry craft, soft copper wire, soft iron wire, etc, not for steel wires. Tip opening: 13mm.
Product code: JBM53411
Shaft locking pin Volkswagen / Audi 2.0 / 2.4 / 3.2 FSI / 2.5 / 3.2 V6 TDI
Product code: W0431
Adjustable timing pulley puller
Adjustable timing pulley puller
Product code: MG04A2213
Valve stem seal pliers
For valve stem seal replacement
Product code: MG50106A
Glow plug removal set, for 8, 10mm glow plugs
For 8, 10mm glow plugs, allows for easy removal and installing, for cleaning plug tips, rethreading, removal of damaged glow plugs.
Product code: MG50339
Universal belt tensioner wrench set
Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm
Product code: MG50635B
Wrench for truck injectors, MAN, Mercedes, Scania and others
Wrench for truck injectors, MAN, Mercedes, Scania and others
Product code: W0016
Wrench for shaft belt pulley unscrewing, BMW diesel E39, E46
Wrench for shaft belt pulley unscrewing, BMW diesel E39, E46
Product code: W0084
Puller to the wiper arms - universal 50x40
Puller to the wiper arms - universal 50x40
Product code: W0119
Timing tool set Opel 2.2 16v chain engine
Timing tool set Opel 2.2 16v chain engine
Product code: W0154
Timing tool set Honda, petrol and diesel 1.6, 1.8, 2.0, 2.3, 3.0 engines
Timing tool set Honda, petrol and diesel 1.6, 1.8, 2.0, 2.3, 3.0 engines
Product code: W0174
Camber angle setting tool
Camber angle setting tool
Product code: W0183
Air conditioning clutch wrench
Air conditioning clutch wrench, 28-29mm
Product code: W0265
Puller sleeves left front beam Ford Focus II; III; C-Max; Volvo (no oe sleeves 1695011, 1355621, 1695011,23032, 30666042, FM-FOC
Product code: W0369
Timing tool set Fiat Ducato 2.2 JTD
Timing tool set Fiat Ducato 2.2 JTD
Product code: W0204
Viscous clutch wrench Mercedes Sprinter 3.0 V6 CDI
Viscous clutch wrench Mercedes Sprinter 3.0 V6 CDI
Product code: W0228
Key crankshaft Citroen / Peugeot, petrol 1.8/2.0/2.2 16V HPI "EW" belt
Key crankshaft Citroen / Peugeot, petrol 1.8/2.0/2.2 16V HPI "EW" belt
Product code: W0273
Internal bearing puller ⌀35mm
Two-arm puller for gearbox bearings with internal diameter 35mm
Product code: W0291
Press the front control arm bolts Renault Scenic II; Grand Scenic II; Megane II; Dacia Logan
Product code: W0352
Lock Camshaft Opel 1.6 / 1.7 Diesel
Product code: W0363
Crankshaft front oil seal puller for Iveco, Fiat 2.3
Crankshaft front oil seal puller for Iveco, Fiat 2.3
Product code: W0437
Adapter puller valve springs 8V
Product code: W0442
Key clutch disc air conditioning Denso 47,5 mm (hardened)
Product code: W0446
Timing lock for VW LT 2.8 TDI
Timing lock for VW LT 2.8 TDI. Engine codes: AGK, ATA, AUH, BCQ.
Product code: W0532
Puller Injectors 2.0 2.2 HDI Bosch
Product code: W0583
Glow plug reamer, 9mm
Tool for reaming broken glow plugs shafts. Diameter: 9mm. Length: 11cm.
Product code: W0633
Puller sleeve rear trailing arm KIA Creed I, II, Hyundai I 30 (oe sleeve 55543-2H000)
Product code: W0643
Fan clutch remover for BMW
BMW fan viscous clutch remover. Double-sided holding tool with a spacing of 38mm and 44.5mm.
Product code: W0676
Hyundai / Kia fuel filter key (108mm)
Product code: W0712
Timing lock for BMW N40, N45 engines
Timing lock for camshafts and variators for BMW N40, N45, N45T (B16) 2001-2009 engines.
Product code: C01/0096
Pneumatic ATF fluid extractor / dispenser 10l
Pneumatic fluid changer for replacing oil in automatic gearboxes and differential gearboxes. The set includes 13 adapters for a wide range of automatic gearboxes (VAG, BMW, Ford and Mercedes-Benz)
Product code: CKB03689
Bearing and gear puller with 3 jaws. Working range: up to 4" (102mm)
Bearing and gear puller with 3 jaws. Working range: up to 4" (102mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.
Product code: G02231
Ignition timing lamp
A strobe lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines.Â
Product code: CKB04795
Puller to the hub / bearings VW T5
Puller to the hub / bearings VW T5
Product code: W0129
Puller for wheel hub / bearing rear swingarm Mercedes Vito Viano 2.2 CDI after 2003
Product code: W0361
Lock injection pump Mercedes Benz Diesel OM 601, OM 602, OM 603
Product code: W0367
Bushing press for Ford Focus, Mazda, Volvo
Press for extracting and installing rear axle bushings Ford Focus, Mazda 3 and 5, Volvo V50. OEM: 1061670, 98AG-5K896-AB.
Product code: W0230
Cam lock set for Ford 1.6 Ti-VCT petrol engines
Camshaft, crankshaft, flywheel lock set for Ford 1.6 Ti-VCT petrol engines
Product code: W0297
Key - Lock crankshaft pulley Honda
Product code: W0308
Adapters Bolt crossover top Jeep - Cherokee, Grand Cherokee, Wrangler
Product code: W0312
Press the upper crossover pins Jeep Cherokee, Grand Cherokee, Wrangler
Product code: W0313
Puller Injectors Citroen Peugeot 1.6 HDI
Product code: W0314
Key to lock the pulley Renault, Peugeot, Citroen 3.0 V6
Product code: W0435
Timing tool set Audi 3.6 / 4.2 V8
Timing tool set Audi 3.6 / 4.2 V8
Product code: W0268
Adapter puller valve springs 20V
Product code: W0441
Lock timing MERCEDES-BENZ 1.8-2.1 engines M651 MB (07-)
Product code: W0478
Lock timing BMW M52 M54 M56 M52TU VANOS
Product code: W0480
The key for assembly and disassembly, and locking pulley BMW M52 / M54 / M56
Product code: W0458
The key to rotate the pulley shaft BMW N47 / M57
Product code: W0498
Bushing installer press for Audi A4 Avant 94-01 rear beam (only for pressing)
Silent installer press for Audi A4 Avant 94-01 rear beam (only for pressing).
Product code: W0421
Stud remover
Stud remover, capacity 6.35-20mm.
Product code: MG50047
Professional diesel injector seat cleaning kit
Universal for most diesel engines. The brushes are specially engineered to fit injector seats. Used to remove rust, carbon and other debris from seats and cups without damage.
Product code: MG01Z9480
Timing tool set VW, AUDI, VAG 1.8 and 2.0 TSI TFSI
Control mount for four-cylinder 1.8, 2.0 16V TSI, TFSI engines. For Audi, VW, Seat, Skoda models
Product code: MG04A2176
Timing tool set for VW, Audi, Skoda, Seat
It helps to avoid damages of valves and pistons. Suitable for models with 1.0L 3 cylinder engines and 1.2L/1.4L engines.
Product code: MG04A3059
Self-adjusting oil filter wrench, 64-102mm
1/2" self-adjusting oil filter wrench, opening 43-102mm, the jaws are adjustable by applying torque to the square drive
Product code: MG50033
Flywheel and camshaft locking pin set, universal
Flywheel and camshaft locking pin for diesel and petrol engines.
Product code: MG50088
Special socket set for A/C and ECU repair
For special safety screws. Suitable for A/C units for MAFs, for ECUs, for the injector air supply, for mass sensors.
Product code: MG50128
Radiator pressure tester kit, 8 adapters
Radiator pressure and leakage tester kit, suitable for almost all car types
Product code: MG50180
Timing tool set for Renault, Opel, Nissan
For 1.5, 1.9, 2.2, 2.5 DCI, DT engines
Product code: MG50306
Timing tool set for Fiat
Timing tool set for Fiat 1.2 16V petrol engines
Product code: MG50308
Timing tool set for BMW, Land Rover, Opel 2.5 TD5
Timing tool set for BMW, Land Rover, Opel 2.5 TD5 diesel engines.
Product code: MG50311
Timing tool set for Ford
For 2.0, 2.2, 2.4 TDDI, TDCI, engines with timing chain
Product code: MG50325
Piston ring expander, 120-160mm
Piston ring expander, clamping capacity 120-160mm
Product code: MG50335C
Timing tool set for Opel, Nissan, Dacia, Renault
2.2, 2.5 DCI, DTI Renault, 2.2 16V petrol engines
Product code: MG50345
Injector puller tool set, with slide hammer
Injector puller tool set, with slide hammer. For Delphi, Bosch, Denso, Siemens injectors
Product code: MG50348
Combined socket set for alternator, 13pcs
Combined socket set for alternator, 13pcs
Product code: MG50352
Injector removing tool set VAG FSI
Injector removing tool set VAG FSI
Product code: MG50363
Timing tool set for BMW, Mini, PSA
BMW Mini camshaft, flywheel locking tools, timing chain tensioner, for 1.4, 1.6 V16 petrol engines
Product code: MG50390
Pneumatic brake fluid exchanger, 0.75l
For draining and filling in oil, bleeding, suitable for cars, motorcycles. Accurate and quick operation.
Product code: MG50445
Copper washer removal tool for diesel injector
Copper washer removal tool for diesel injector, length 230mm
Product code: MG50629
Timing tool set for Alfa Romeo, Fiat, Lancia
For Alfa Romeo, Fiat, Lancia 1.4, 1.6, 1.8, 2.0 engines
Product code: MG50632
Camshaft timing tool set for BMW, N42, N46, N46T
Camshaft timing tool set for BMW, N42, N46, N46T
Product code: MG50659
Central bolt puller upper arm VW, Audi after 2005
Central bolt puller upper arm VW, Audi after 2005
Product code: W0164
Tool for setting the bearings of the VW Audi 7 speed DSG gearbox
Product code: W0692
A key for locking the pulley shaft Ford / Volvo 1.4, 1.6, 1.8, 2.0, 2.3 16v Duratec
Product code: W0566
Puller injection pump Vw Seat skoda 1.6 / 2.0 TDI CR
Product code: W0586
Lock the timing VW Transporter 2.4D (95-03), Volkswagen Crafter 2.5 TDi (06-09)
Product code: W0408
Puller for suspension arm sleeve, Cinquecento,Seicento
Puller for suspension arm sleeve, Cinquecento,Seicento
Product code: W0004
Universal tool for brake pistons pushing – front
Universal tool for brake pistons pushing – front
Product code: W0003
Universal AC clutch remover
Universal disc with a centering mandrel for the removal of car air conditioning clutches.
Product code: W0013
Wrench for alternator, VW, Audi, Mercedes (length 30mm, width 19.6mm)
Wrench for alternator, VW, Audi, Mercedes (length 30mm, width 19.6mm)
Product code: W0015
Timing tool set for VW, Audi, Skoda 2.4 - 2.8, 3.7, 4.2 engines
Timing tool set for VW, Audi, Skoda 2.4, 2.5, 2.6, 2.7, 2.8, 3.7, 4.2 V6, V8 diesel and petrol engines.
Product code: W0019
Tool to adjust the variable cam timing Vanos BMW M60, M62 V8 Land Rover
Product code: W0678
Timing tool set for Fiat Multijet and Opel CDTI engines
Timing tool set 1.3 CDTI/JTD (Fiat Multijet, Opel CDTI).
Product code: W0025
Adapter + screw of injector puller, Mercedes CDI, VW TDI; Bosch
Adapter + screw of injector puller, Mercedes CDI, VW TDI; Bosch
Product code: W0029
Timing tool set for Opel 1.0, 1.2 DOHC twin cam engines
The kit allows to set and lock the camshafts In Opel Agila, Astra-G, Corsa-B, Meriva 1.0, 1.2 12V twin cam ecotec engines.
Product code: W0030
Timing tool set for Audi, Seat, Skoda, VW 1.4, 1.6 16V petrol engines
It is used to set the correct position of the camshafts on 1.4 and 1.6 petrol engines with double camshafts.
Product code: W0032
Adapter for injector pulling, Mercedes CDI (hardened)
Adapter for injector pulling, Mercedes CDI (hardened)
Product code: W0053
Inertial puller for car injectors, CDI
Inertial puller for car injectors, CDI
Product code: W0061
Inertial puller for car injectors, CDI and others, with 3 axles
Inertial puller for car injectors, CDI and others, with 3 axles (200mm, 240mm, 280mm)
Product code: W0063
Wrench for injection pump, electromagnetic, Ford Ford 1.8i, 2.0, 2.2, 2.4 TDCi | TDDDi
Product code: W0706
Timing tool set, Fiat and Iveco 2.3, 3.0 JTD
Timing tool set for Fiat and Iveco 2.3, 3.0 JTD engines.
Product code: W0078
Set for dismantling of injectors, Bosch and others
Set for dismantling of injectors, Bosch and others
Product code: W0091
Rocker pin puller and press for T4, Master, Movano, Interstar, Sprinter, VW LT
Press for upper bolts T4, Master, Movano, Interstar and lower bolts Sprinter, VW LT
Product code: W0093
Lock timing Ford 1.8, Mazda 2.0 / 2.3 turbo
Product code: W0373
Adapters for press, puller for bolts, Master, Movano, Interstar
Adapters for press, puller for bolts, Renault Master, Opel Movano, Nissan Interstar
Product code: W0102
Lock timing Ford Mondeo, Focus, C-Max 2.0 EcoBoost after 2010
Product code: W0375
Set of wrenches for injection pumps, 5 pcs of special wrenches
Set of wrenches for injection pumps, 5 pcs of special wrenches
Product code: W0108
Puller sleeve rear beam Renault Megane II; Scenic II; Grand Scenic II (oe sleeve 7701479190)
Product code: W0379
Universal wiper arm puller
Universal wiper arm puller. Two paws type.
Product code: W0123
Camshaft locking tool for Fiat 1.4 Fire Evo
Camshaft locking tool for Fiat 1.4 Fire Evo petrol engines.
Product code: W0124
Camshaft locking tool BMW Common Rail 2.0 d, 3.0d (TU)
Camshaft locking tool BMW Common Rail 2.0 d, 3.0d (TU) with rack and pinion drive wheels.
Product code: W0126
Timing tool set Ford 1.6 /1.8 / 2.5 D/TD
Timing tool set Ford 1.6 /1.8 / 2.5 D/TD
Product code: W0128
Camshaft locking tool VAG, VW, Ford 2.3, 2.8, 2.9 (1991-2005), steel
Camshaft locking tool VAG, VW, Ford 2.3, 2.8, 2.9 (1991-2005), steel
Product code: W0130
Universal camshaft pulley locking tool set, hardened
Universal camshaft pulley locking tool set, hardened
Product code: W0132
Lock camshaft BMW M40, M43 models E30, E34, E36
Lock camshaft BMW M40, M43 models E30, E34, E36
Product code: W0139
Sleeve puller for control arm rear axles for Fiat, Opel, Saab etc.
Sleeve puller for control arm rear axles for Fiat, Opel, Saab etc.
Product code: W0142
Flywheel locking tool set Ford Mazda Volvo
Flywheel locking tool set Ford Mazda Volvo petrol engines (1991-2010), 1.4 / 1.6 / 1.7 / 1.8 / 2.0 16V
Product code: W0148
Timing tool set Renault 1.2, 1.4, 1.6 1.8, 2.0, 2.0 16v Turbo, 1.5 dCi
Timing tool set Renault 1.2, 1.4, 1.6 1.8, 2.0, 2.0 16v Turbo, 1.5 dCi
Product code: W0156
Sleeve puller, Golf IV, Audi A3, Skoda Octavia for the sleeve FEBI
Sleeve puller, Golf IV, Audi A3, Skoda Octavia for the sleeve FEBI
Product code: W0172
Wheel bolt for injection pump lock Volkswagen, Audi, Seat, Skoda
Wheel bolt for injection pump lock Volkswagen, Audi, Seat, Skoda
Product code: W0176
Timing tool set, Ford, Mazda, Diesel 1.8 TDCi, TCI
Timing tool set, Ford, Mazda, Diesel 1.8 TDCi, TCI
Product code: W0178
Adapter for injection units pulling, Fiat Ducato 2.3 JTD 15.5 mm
Adapter for injection units pulling, Fiat Ducato 2.3 JTD 15.5 mm
Product code: W0184
Puller sleeve (only for pressing) of the rear beam Citroen, Peugeot
Puller sleeve (only for pressing) of the rear beam Citroen C4, Peugeot 307.
Product code: W0186
Timing tool set BMW / Rover Diesel Common Rail System
Timing tool set BMW / Rover Diesel Common Rail System
Product code: W0188
Injector removal set for Mercedes A Class CDI
Injector removal set for Mercedes A Class CDI
Product code: W0206
Tensioning key Fiat / Alfa Romeo / Lancia (male)
Tensioning key Fiat / Alfa Romeo / Lancia (male)
Product code: W0201
Timing belt tensioner key, Chrysler Voyager, Jeep Cherokee 2.5, 2.8 CRD
Timing belt tensioner key, Chrysler Voyager, Jeep Cherokee 2.5, 2.8 CRD diesel engines
Product code: W0219
Injection pump gear removal BMW, Opel, Land Rover
Injection pump gear removal BMW, Opel, Land Rover
Product code: W0229
Dial strip Opel Kadett, Astra, Vectra, 1.6 / 1.7 - Diesel
Dial strip Opel Kadett, Astra, Vectra, 1.6 / 1.7 - Diesel
Product code: W0245
Timing tool set for Citroen and Peugeot 2.0 16V
Timing tool set for Citroen and Peugeot 2.0 16V with variable phase timing
Product code: W0255
The key to the water pump timing belt tensioning- Opel / Daewoo / Chevrolet 46mm
The key to the water pump timing belt tensioning- Opel / Daewoo / Chevrolet 46mm
Product code: W0258
Timing tool set, Volkswagen, Audi, Seat 1.9 SDI / TDI
Timing tool set, Volkswagen, Audi, Seat 1.9 SDI / TDI
Product code: W0259
Timing tool set Mini One, Cooper 1.6, Cooper 1.6s, petrol, chain
Timing tool set Mini One, Cooper 1.6, Cooper 1.6s, petrol, chain
Product code: W0264
Timing tool set Opel Vectra C 2.8 V6 timing chain, petrol
Timing tool set Opel Vectra C 2.8 V6 timing chain, petrol
Product code: W0266
Timing tool set Audi VW Skoda Seat 2.4, 2.7, 2.8, 3.0 V6 30V
Timing tool set Audi VW Skoda Seat 2.4, 2.7, 2.8, 3.0 V6 30V
Product code: W0269
Puller bushings rear beam Renault Laguna II set (5 adapters to org and not of original sleeves)
Product code: W0330
Puller injection pump sprocket Renault 1.9 D / TD / Volvo / Opel
Puller injection pump sprocket Renault 1.9 D / TD / Volvo / Opel
Product code: W0274
The key to lock the crankshaft Volkswagen Audi Skoda 1.4-1.6 16V petrol
The key to lock the crankshaft Volkswagen Audi Skoda 1.4-1.6 16V petrol
Product code: W0275
Tool for setting the oil pump Ducato, Iveco, Citroen Jumper - 2.3 Diesel CR
Product code: W0278
Bushing injection pump BMW Common-Rail 2.0d N47 / N47S (06-10)
Product code: W0282
Cam lock VW, Seat, Skoda and Audi 1.2 TSI, TFSI engines
Cam lock tool for VW, Skoda, Seat, Audi 1.2 TSI chain driven petrol engines.
Product code: W0292
Timing lock set for Ford diesel and petrol engines
Universal timing lock set for Ford diesel and petrol engines. With 3 interchangeable adapters.
Product code: W0298
Timing Lock Ford, Peugeot, Volvo - 2.0, 2.2 D
Product code: W0300
Camshaft lock for Land Rover / Jaguar Diesel 2.0 Tdi, 2.5 Tds, 2.7 TDV6
Camshaft lock for Land Rover / Jaguar Diesel 2.0 Tdi, 2.5 Tds, 2.7 TDV6
Product code: W0302
The key to lock the crankshaft VW / Audi / Seat / Skoda 1.8 TDI TFSI
Product code: W0303
Adapter for pulling Denso injectors for Toyota 2.2 170hp engines
Adapter for pulling Denso injectors for Toyota 2.2 170hp engines
Product code: W0320
Puller Injector HDI Siemens M25 x 1 (hardened)
Product code: W0394
Camshaft lock (locking plates) for Renault, Nissan, Opel 2.2, 2.5 dCi
A timing setting tool (setting plates) for Renault, Opel, Nissan 1.5, 1.9, 2.2, 2.5 dCI engines.
Product code: W0335
Adapters for mounting and dismounting the front control arm bolts Renault Scenic II; Grand Scenic II; Megane II; Dacia Logan
Product code: W0353
Lock (pin; adapter) timing Renault / Opel / Nissan 1.9 DCI
Product code: W0342
Cam lock Citroen / Peugeot 1.4 16V "ET"
Product code: W0358
Denso injector valve wrench
3-pin key for removing and installing the return valve on Denso Common Rail diesel injectors.
Product code: W0391
Lock camshaft Opel Corsa D 1.0
Product code: W0402
Key locking the crankshaft Ford Mondeo, Transit 2.0 2.2 2.4 3.2 Duratorq TDCi (01-)
Product code: W0407
Injection pump removal tool for BMW N47, N47S Common Rail engines
Pinion extractor for diesel injection pumps in BMW N47, N47S and N57 1.8d, 2.0d, 2.5d, 3.0d engines manufactured in 2007 - 2015. This extractor is compatible with new generation BMW engines that have the distribution in the back (at the flywheel).
Product code: W0423
Lock camshaft - Opel, Chevrolet, SAAB 2.8; 3.0; 3.2; 3.6
Product code: W0454
Lock camshaft Ford 1.6 EcoBoost
Product code: W0457
Lock timing Mercedes 2.0 2.1 2.2 CDI set
Product code: W0477
Lock timing Land Rover 2.5D / Td5 on a chain
Product code: W0466
Puller sleeve for BMW bushings
Pulling tool for the assembly and thedisassembly of bushings on the car. BMW: 5 (E60), 5 Touring (E61), 6 (E63), 6 convertible (E64).
Product code: W0519
The key pulley shaft Opel 1.6 SIDI gasoline
Product code: W0511
Lock and pulley puller Jaguar and Land Rover
Product code: W0525
Rear beam puller for Opel Corsa B, C, Tigra (oe bushes 24443815; 5402636)
Product code: W0539
Injection pump gear puller for KIA, Hyundai 2.0, 2.2 CRDI
This tool allows the fuel pump sprocket to be pulled from the pump. Essential for sprocket removal.
Product code: W0541
Lock the timing of VW, Audi, Seat, Skoda - 2.0 FSI / TFSI – petrol
Product code: W0554
Puller injectors Fiat; Citroen; Iveco 2.2 TDCI, HDI, JTD
Product code: W0556
Key to the oil plug Volkswagen, Audi, Seat, Skoda TSI; TFSI
Product code: W0581
Locking of the flywheel and the pulley shaft Renault Nissan 1.4, 1.6; 2.0; 2.3
Product code: W0584
The key to the timing belt tensioner VW, Audi, Skoda 1.4 TSI / TFSI 16mm
Product code: W0597
Timing lock for BMW E30, E36, E46, E34, E39, E38 engines
Timing lock for BMW M42, M44, M50, M52, M54, M56, M52TU, S50US, S52US.
Product code: W0595
Timing lock Jaguar, Land Rover 4.0, 4.2, 4.4 petrol by 2010
Product code: W0609
Injection pump removal tool for Renault, Opel, Nissan 2.2, 2.5 DTI, CDTi
A tool to remove the diesel pump sprocket to allow the removal of the fuel pump without disturbing the timing belt on Renault 2.5 and 2.2 diesel engines found in Renault, Opel and Nissan vans.
Product code: W0602
Variator key for VAG 1.4, 1.6 TSI and TFSI engines
Variator key for VW, Audi, Seat, Skoda 1.4, 1.6 TSI and TFSI engines.
Product code: W0603
Fuel pump nut wrench for Fiat, Citroen, Peugeot
Fuel pump nut wrench for Fiat Ducato, Citroen Jumper, Peugeot Boxer.
Product code: W0620
Camshaft locking tool for Mercedes M271, C200, C180, E260
Use this tool to accurately position and align the TDC to fix the camshaft in the timed position (direct center), so that the cam phaser can be effectively removed while tightening and loosening the phaser bolt. (Note that the camshaft must be aligned when removing and installing the timing chain)
Product code: W0662
Key clutch disc air conditioning Denso 28 mm (hardened)
Product code: W0666
Injection pump puller for Hyundai and KIA 1.6 CRDi engines
Injection pump puller for Hyundai and KIA 1.6 CRDi engines.
Product code: W0683
Puller gear injection pump Peugeot Citroen Toyota 1.6 HDI
Product code: W0697
Timing lock Ford 1.6 Ecoboost SCTi / Ti-VCT Ecoboost
Product code: W0703
Wrench for unscrewing the nut of the injector unit body Vw, Audi 2.0 - Siemens (30mm)
Product code: W0709
The key to block the Ford A / C compressor pulley
Product code: W0711
The key to blocking the Ford Transit air conditioning pulley
Product code: W0713
Flat staples for hot stapler 0.8mm
Flat staples for hot stapler ø=0.8mm wire, 100pcs
Product code: 804076
Inside corner staples for hot stapler 0.6mm
Inside corner staples for hot stapler ø=0.6mm wire, 100pcs
Product code: 804080
Pneumatic reciprocating saw, 10000 rpm
Pneumatic reciprocating saw, adjustable guard/guide allows to set depth of cut, rotation speed 10000rpm, air consumption: 113l/min
Product code: ATW-RT-3702
Timing lock set for Opel 1.0, 1.2, 1.4 petrol engines with timing chain
Timing lock set for Opel and Chevrolet 1.0, 1.2, 1.4 petrol engines with timing chain (2010-).
Product code: C01/0028
Crankshaft lock for Ford 1.8 / 2.0 TDDI TDCI
Crankshaft lock for Ford 1.8 / 2.0 TDDI TDCI
Product code: C01/0004
Camshaft lock for VW 2.5 TDI 5-cylinder diesel engines
Camshaft lock for VW, Audi 2.5 TDI 5-cylinder diesel engines.
Product code: C01/0020
Timing lock for BMW M60, M62 engines
Timing lock for BMW M60, M62, 730i, 740i, 535i, 540i, 735i, 840i, X5 engines.
Product code: C01/0038
Timing lock set for BMW M40, M42, M43, M44, M50, M52, M54 engines
Timing lock set for BMW M40, M42, M43, M44, M50, M52, M54 engines.
Product code: C01/0042
Timing lock set for BMW M60 and M62 3.0, 3.5, 4.0, 4.4, 4.6 engines
Timing lock set for BMW M60 and M62 3.0, 3.5, 4.0, 4.4, 4.6 engines.
Product code: C01/0059
Timing lock for BMW 2.5 and 3.0 engines N51, N52, N52K, N55
Application: N51, N52, N52K with Valvetronic and N55.
Product code: C01/0070
Timing lock for BMW dual engine block M52, M54 and M56 with Vanos
Timing lock for BMW dual engine block M52, M54 and M56 with Vanos.
Product code: C01/0065
Timing lock for BMW chain pulley 2.5 and 3.0 engines N53, N54
Timing lock for BMW chain pulley 2.5 and 3.0 engines N53, N54.
Product code: C01/0073
Timing lock for BMW, Mini N47 and N57 1.6, 2.0, 3.0 engines
Timing lock for BMW, Mini N47 and N57 1.6, 2.0, 3.0 engines.
Product code: C01/0075
Camshaft lock for Opel, Saab, Chevrolet 2.0l and 2.4l Turbo
Camshaft lock for Opel, Saab, Chevrolet 2.0l and 2.4l Turbo (2008-2015)
Product code: C01/0125
Belt pulley wrench for BMW diesel engines, 57mm
The BMW pulley wrench has a diameter of 57mm. It holds the belt pulley and the crankshaft in place.
Product code: C01/0137
Socket for removing rear axle nut in Mercedes Vario
Socket for removing rear axle nut in Mercedes Vario.
Product code: C01/0164
Timing lock for Renault, Nissan, Opel 2.0 DCi diesel engines
Timing lock for Renault, Nissan, Opel 2.0 DCi diesel engines.
Product code: C01/0173
Timing tool for BMW, Mini, Peugeot, Citroen 1.4 and 1.6 engines
Timing tool for BMW, Mini, Peugeot, Citroen 1.4 and 1.6 engines.
Product code: C01/0184
Timing lock Ford 2.2 TDCI engines
Timing lock Ford 2.2 TDCI Transit, Econetic HDT diesel engines.
Product code: C01/0191
Camshaft timing tool Mercedes Benz M156 and M159 engines
Tool for adjusting the timing during chain change for Mercedes Benz 6.2L V8 engines.
Product code: C01/0217
Fuel pump tool for Land Rover and Jaguar 2.0 diesel engines
The tool is used to remove the fuel pump without damaging the chain.
Product code: C01/0255
Adapter set for bushings of swingarm pins for VW T4, LT, Crafter, Mercedes Sprinter
Adapter set for bushings of swingarm pins for VW T4, LT, Crafter, Mercedes Sprinter
Product code: C02/0146
Adapter for Mercedes CDI injectors
13mm claw puller for Mercedes CDI injectors.
Product code: C04/0102
Adapter for air conditioning system - low pressure
Adapter for air conditioning system - low pressure
Product code: C05/0021
Suspension support rod measuring tool
The device is designed for precise measurements of the curvature of the front suspension support pipes. Dial indicator not included.
Product code: C06/0212
Oil drain socket set 12pcs
Oil drain hex and square sockets set. Square: 8, 11, 13mm. Hex: 8, 9, 10, 12, 14, 17mm.
Product code: CHS-E1156
Fuel injector pressure tester kit
Fuel injector pressure tester for petrol engines.
Product code: CHS-A1011
Oil pan thread repair set for M14x1.5 pans
Oil pan thread repair set for M14x1.5 pans
Product code: CKB0025-3
Timing belt tensioner wrench for VW, Audi
Timing belt tensioner wrench for VW, Audi
Product code: CKB01629
7pcs air conditioning and fuel line disconnect set
A practical set of 7pcs of quick disconnect tools for AC and fuel lines.