Offset oxygen sensor socket. Diameter: 22mm, Drive: 3/8" square
Product code: G02686
Brand: Geko
- Budapest: 9
- Debrecen: 3
Product description
Description
Common 6 point, 7/8 in (22mm) socket, suitable for most oxygen sensors. Use with any 3/8" square drive ratchet or breaker bar. The socket is slotted so that you can remove the oxygen sensor while it is still connected to the wiring harness. The offset socket allows users to exert maximum torque while the precision casting ensures accurate fit and function.
Product packing
| Pack number | Dimensions | Weight |
|---|---|---|
| 1 | 0 x 0 x 0 cm | 0.17 kg |
Delivery fee
| Delivery method | Gross price |
|---|---|
| Pickup in Nagytarcsa | 0,00 € |
| Pickup in Debrecen | 0,00 € |
| DHL Worldwide Express | 61,67 € |
Alternative products
Oxygen sensor socket 22mm, 3/8" square drive
This Oxygen Sensor Socket is a specialized tool designed for the removal and installation of oxygen sensors in vehicles equipped with computer-controlled engines. The built-in offset allows for more leverage on the socket in tight spaces by inserting a 3/8-inch square drive tool or breaker bar.
Product code: MG92571
More products in this category
Lambda probe tester and simulator
The lambda probe tester and simulator tests zirconia and titania lambda sensors and the ECU (engine control unit, which monitors the parts necessary for the proper operation of internal combustion engines for proper performance). Designed to accommodate 1, 2, 3, and 4 wire sensors, both heated and unheated, this versatile device takes your automotive diagnostics to the next level.
Product code: MG04D7015
Exhaust backpressure test kit
The tool allows auto mechanics and vehicle owners to easily check that the exhaust system is working properly and that there are no issues with exhaust backpressure.
Product code: MG04A2167
Puller spring muffler mounting position VW / AUDI
Product code: W0125
Exhaust pipe rubber ring mounting tool set, 2pcs
Two T-handle tools allow for easy installation of exhaust assemblies. The product consists of 1 piece with a straight end and 1 piece with a hook end to fit the block and ring holders.
Product code: MG04A2086
Citroen, Peugeot exhaust pipe clamp remover
Especially for removing and installing Citroen, Peugeot, Renault exhaust clamps.
Product code: MG50485
Exhaust Hanger Removal Pliers
Removal pliers are a special tool that allows you to easily and safely remove and reassemble the exhaust system without damaging the connections or seals. It enables easy, quick and one-handed use when removing the rubber strap.
Product code: MG04A2301
Exhaust pipe clamp pliers
Special tool for removal or installation of exhaust pipe clamps on Citroen, Peugeot, Renault models
Product code: JBM53396
Exhaust spring clamp remover
An exhaust spring clamp remover is required for the professional and safe installation of the spring. Used to remove and install fasteners. Made of high quality steel. Can be used with a 17 mm socket or wrench.
Product code: MG04A2087
Universal Tail Pipe Cutter Exhaust Pipe Cutting Wrench
Wrench designed for cutting steel exhaust pipes, but can also be used to cut copper steel pipes, PVC, etc. The Universal Exhaust Pipe Cutter is the best tool for exhaust system repair and maintenance. Easy to use and versatile to adapt to any exhaust pipe.
Product code: CKB07414
Exhaust pipe and tailpipe cutter
This is designed for precision cutting of exhaust pipes and both steel and copper tubing. This versatile cutter is an essential item for automotive repair, maintenance tasks, and custom exhaust system creation.
Product code: MG97577
Exhaust pipe expander, 29-44, 38-62, 54-87mm
A spacer is used to expand a length of pipe in equal proportions so that the pipe has the same diameter and is not tapered. It provides a perfect fit without leakage and removes dents and pinch marks.
Product code: MG50076
Oxygen sensor socket 22mm, 8mm cut-out, 3/8" square drive
This Oxygen Sensor Socket is specifically crafted for the efficient removal and installation of oxygen sensors on vehicles with computer-controlled engines.
Product code: MG92576
Oxygen sensor thread chasers, 2pcs
The Oxygen sensor thread chasers comes with tools that allow you to repair a damaged or damaged lambda sensor thread instead of having to replace the entire lambda sensor.
Product code: MG04A6021
Spark plug and lambda probe thread repair kit
Spark plug and lambda probe thread repair kit is suitable for deaning corrosion and carbon build-up from spark plug / sensor threads.
Product code: MG04A6020
Spark/Glow plug and oxygen sensor master service set, 11pcs
Forged Chrome Vanadium master service set for the professional. Includes all the sockets and extensions required to remove/install sprak/glow plugs and oxygen sensors on most modern vehicles.
Product code: MG92585
Oxygen sensor socket set
This kit allows quick and damage-free replacement of lambda sensors, which are an important part of exhaust gas treatment systems. Different sizes and types of keys ensure that all lambda probe types are suitable, maximizing flexibility and applicability.
Product code: MG50627
Oxygen sensor socket 22mm, 20mm cut-out, 3/8" square drive
This Oxygen Sensor Socket is specifically crafted for the efficient removal and installation of oxygen sensors on vehicles with computer-controlled engines.
Product code: MG92577
Oxygen sensor wrench with flexible handle, 22mm
This Oxygen Sensor Wrench is designed for the efficient removal and installation of oxygen sensors.
Product code: MG92572
Oxygen sensor socket 22mm, 1/2" square drive
This Oxygen Sensor Socket is a specialized tool designed for the removal and installation of oxygen sensors in vehicles equipped with computer-controlled engines. The built-in offset allows for more leverage on the socket in tight spaces by inserting a 1/2-inch square drive tool or breaker bar.
Product code: MG92574
Oxygen sensor socket 22mm, 3/8" square drive
This Oxygen Sensor Socket is a specialized tool designed for the removal and installation of oxygen sensors in vehicles equipped with computer-controlled engines. The built-in offset allows for more leverage on the socket in tight spaces by inserting a 3/8-inch square drive tool or breaker bar.
Product code: MG92571
Set of lambda probe oxygen sensor, vacuum switch remover
Professional set of lambda probe caps 7 pcs. 1/2", 3/8" x 22, 27, 29 mm. Suitable for removing and installing oxygen sensors, oil pressure switches, oil pressure sending units, thermal sensor switches, vacuum switches and break light switches.
Product code: CKB04042
Exhaust fume extractor for motorcycles
Mobile exhaust fume extractor, suitable for motorcycles. Air flow 420m3/h, adjustable height 250-1350mm, hose thermal stability 110°C, diameter 121mm, length 6m
