Injector puller for Fiat, Citroen, Iveco 3.0 HPI
Product code: W0558
Brand: Lincos
Product description
Description
Diesel injector tips are a key component of diesel engines as they are responsible for injecting fuel into the cylinder during the compression stroke. Over time or when problems occur, the injector tips may require maintenance, cleaning or replacement. The tip puller design allows the tips to be removed from the injector cavity accurately and safely without damage to the tip or cavity. The precise fit and reinforcement of the tool allows the application of the correct force for reliable removal of the injector tips.
Applicaion
- 3.0 HPI engines: Iveco Daily, Fiat Ducato, Citroen, Peugeot
Product packing
| Pack number | Dimensions | Weight |
|---|---|---|
| 1 | 34 x 24 x 5 cm | 2.8 kg |
Delivery fee
| Delivery method | Gross price |
|---|---|
| Pickup in Nagytarcsa | 0,00 € |
| Pickup in Debrecen | 0,00 € |
| DHL Worldwide Express | 87,16 € |
More products in this category
Pneumatic injector puller set, 24pcs
Pneumatic injector puller set, 24pcs is a specialized tool set designed for removing injectors from automotive engines using pneumatic power.
Product code: MG98784
Pneumatic injector puller set, 21pcs
Pneumatic injector puller set, 21pcs is a specialized tool set designed for removing injectors from automotive engines using pneumatic power. The set includes a pneumatic puller, a black BMC (Blow Molded Case) for storage, and color stickers for organization and identification.
Product code: MG98782A
Injector puller tool set, with slide hammer
Injector puller tool set, with slide hammer. For Delphi, Bosch, Denso, Siemens injectors
Product code: MG50348
Pneumatic Injector Puller
A pneumatic injector puller is a tool used to easily and efficiently remove injectors from diesel vehicles. The tool uses pneumatic power to safely pull the injectors out of the engine, allowing for easy replacement or repair.
Product code: JBM54186
Fuel injector puller and installer tool set for BMW, Mercedes Benz
Designed to facilitate the removal and installation of fuel injectors in BMW and Mercedes Benz vehicles. Made with the highest quality materials to ensure the effective removal and installation of fuel injectors without causing damage.
Product code: JBM54220
Injector gasket puller
For the extraction of copper sealing gaskets and washers within injector seats.
Product code: MG04A3079
Injector removal set for Ford EcoBlue 2.0 diesel
Injector removal set for Ford Edge, Focus, Galaxy, Kuga, Mondeo, Ranger, S-Max, Tourneo Custom, Transit, Transit Custom EcoBlue 2.0 diesel. OEM: 303-1706.
Product code: C04/0244
Slide hammer for injector pulling, weight 2.5kg, M12/M16
Slide hammer for injector pulling, weight 2.5kg, M12/M16.
Product code: W0067
Master injector extractor kit with hydraulic cylinder
Universal kit complete with hydraulic cylinder for removing seized fuel injectors. Suitable for the extraction of various diesel fuel injectors.
Product code: MG04A3117
Injector nozzle extractor set for Mercedes-Benz, Chrysler
Mercedes C-Class, E-Class, Sprinter (611, 612, 613) Chrysler Grand Cherokee 27crd (00'-)
Product code: MG50357
Injector removing tool set VAG FSI
Injector removing tool set VAG FSI
Product code: MG50363
Injector nozzle extractor set
This injector seat removal tool kit is the perfect tool for common rail systems, specifically designed for MERCEDES-BENZ CDI engines.
Product code: MG50350
BMW Common Rail injector puller set
Allows to remove the injector without disassembling the cylinder head. For BMW M47TU, M57, M57TU engines.
Product code: MG50630
Injector nozzle extractor set
The Injector Nozzle Extractor Set is a specialized toolkit designed for the precise task of removing injector nozzles from specific diesel engines. This set is particularly tailored for use with PSA 2.0 HDI engines found in Peugeot and Citroën vehicles, as well as PSA 2.0 JTD engines utilized in Fiat and Lancia models.
Product code: MG50638
Mercedes CDI injector puller, with slide hammer
For removal of stuck injectors without dismantling the cylinder head. Mercedes 611, 612, 613
Product code: MG50154
Universal injector extractor set with hydraulic cylinder
Universal extractor set for pulling out engine injectors. Includes adapters for Bosch, Delphi, Denso and Siemens injectors.
Product code: C04/0027S
Universal injector extractor set
Universal extractor set for pulling out engine injectors. Includes adaptors for Bosch, Delphi, Denso and Siemens injectors.
Product code: C04/0027
Injector puller with sliding hammer for Mercedes CDI injectors
Injector puller with sliding hammer for Mercedes CDI injectors in OM611, 612 and 613 engines.
Product code: C04/0095WF
Injector puller with sliding hammer for Mercedes CDI injectors
Injector puller with sliding hammer for Mercedes CDI injectors 611, 612, 613
Product code: C04/0095
Injector puller for VW 2.0 TDI engines
Injector puller for VW 2.0 TDI engines.
Product code: C04/0093
Adapter for Mercedes CDI injectors
13mm claw puller for Mercedes CDI injectors.
Product code: C04/0102
Adapter for extracting VW TDI PD injectors
Adapter for extracting VW TDI PD injectors
Product code: C04/0097
Injector removal set for Mercedes A Class CDI
Injector removal set for Mercedes A Class CDI
Product code: W0206
Hydraulic cylinder to the pullers, press and injectors - 15 Ton
With a 15-ton pressing force, this hydraulic cylinder delivers exceptional power to handle tasks. Whether you need to remove stubborn parts, press components together or work with injectors, this cylinder provides the necessary force to get the job done efficiently.
Product code: W0432
Puller adapter for Denso M25x0.5 Toyota and Mazda injectors
Puller adapter for Denso M25x0.5 Toyota and Mazda injectors
Product code: W0534
Adapter for loosening stuck M12x1 injectors
Adapter for loosening stuck M12x1 injectors
Product code: W0531
Adapter for loosening stuck M14x1 injectors
Adapter for loosening stuck M14x1 injectors
Product code: W0536
Puller injectors Citroen Jumper; Peugeot Boxer; Fiat 2.3 JTD HPI
Product code: W0560
Injector puller adapter HDI 2.0, 1.3 CDTI
Injector puller adapter HDI 2.0, 1.3 CDTI
Product code: W0409
Injector puller HDI Siemens M25 x 1 (hardened)
This injector puller is specially designed for HDI Siemens injectors with M25 x 1 thread.
Product code: W0394
Puller injectors Fiat; Citroen; Iveco 2.2 TDCI, HDI, JTD
Product code: W0556
Puller Injectors 2.0 2.2 HDI Bosch
The Puller for Injectors on 2.0 and 2.2 HDI engines with Bosch injectors is a specialized tool used for removing the injectors from the cylinder head. This puller is designed to securely fasten to two specific points: behind the valve seat and the injector body.
Product code: W0583
Puller Injectors Chrysler Voyager 2.5; 2.8 CRD
Product code: W0538
Injector puller for Fiat, Citroen, Iveco 3.0 HPI
Specialized puller for removing injectors from the engine block.
Product code: W0558
Adapter / Puller Injector Opel Renault 2.0 DCI / CDTI and others (hardened)
Product code: W0380
Injector puller adapter, VW TDI PD
Adapter for injector pulling, VW TDI PD.
Product code: W0094
Injector puller Fiat Opel 1.9 JTD ; CDTI
The injector puller is a specialized tool used for removing injectors from the cylinder head of diesel engines. It is specifically designed for use with Fiat, Opel, and Lancia vehicles equipped with 1.9 JTD/CDTI diesel engines.
Product code: W0551
Puller Injectors Fiat Opel Suzuki 1.3 JTD CDTI DDIS
Product code: W0494
Injector pulling adapter, Fiat Ducato 2.3 JTD, 15.5mm
Injector pulling adapter, Fiat Ducato 2.3 JTD. Diameter: 15.5mm
Product code: W0184
Injectors puller for Renault, Opel, Nissan, Suzuki 1.9 DCI / CDTI engines
Tool for dismantling and pulling out Renault, Nissan, Opel, Suzuki 1.9 DCI / CDTI injectors.
Product code: W0315
Puller Injectors for Citroen, Peugeot 1.6 HDI engines
This tool is specifically designed for the safe and efficient removal of injectors in Citroen and Peugeot 1.6 HDI engines.
Product code: W0314
KIT to pull the injector, 10mm hex wrench, thread adapter (W0104, W0135)
Kit for removing the particularly difficult-to-extract injector.
Product code: W0137
Inertial puller for car injectors, HDI
Injector puller with slide hammer, HDI, 19 mm is a high quality and professional tool designed for the maintenance and repair of gasoline direct injection systems. This sliding hammer is specially designed for the efficient removal of injectors of HDI type engines.
Product code: W0062
Adapter for injector pulling, 1.5 DCI Delphi (14x1.5) Renault, Nissan
The injector puller adapter is specifically designed for Renault and Nissan 1.5 DCI Delphi (14x1.5) engines to provide a professional and precise tool for injector removal.
Product code: W0248
Inertial puller for car injectors, CDI
Inertial puller for car injectors, CDI
Product code: W0061
Set for dismantling of injectors, Bosch and others
Set for dismantling of injectors, Bosch and others
Product code: W0091
Set for removing injectors Delphi 2.0 HDI (12mm) (Delphi 28388960)
The purpose of the kit is to safely and efficiently remove the injectors from the given type of engine. Delphi 2.0 HDI (12mm) injectors require special handling and tools, and the tools in the kit allow professional work with these parts.
Product code: W0661
Injector puller with Bosch M17x1 system, with screw
Injector puller with system Bosch M17x1 is a specialized tool designed for removing injectors from vehicles equipped with the Bosch injection system. It is particularly suitable for cars with this specific injection system and features hardened components for enhanced durability. The injector is removed by mounting the adapter in place of the coil and the injector valve.
Product code: W0599
Adapter + screw of injector puller, Mercedes CDI, VW TDI; Bosch
The tool allows the safe and efficient removal of injectors from the respective engines.
Product code: W0029
Injector puller adapter, 2.0 HDI, 12mm
Puller adapter for 2.0 BlueHDi, HDI, TDCi Delphi, DS, Ford, Citroen, Peugeot injectors, 12mm.
Product code: W0663
Inertial puller for car injectors, CDI and others, with 3 axles
Injector puller with sliding hammer, for CDI and other engines, with 3 shafts (200mm, 240mm, 280mm)
Product code: W0063
Injector removal adapter for Renault 2.3 DCI, after 2012, 20mm
Injector removal adapter for Renault 2.3 DCI, after 2012, 20mm.
Product code: W0467
Inertial puller for car injectors + attachment, CDI and others
Inertial puller for car injectors + attachment, CDI and others
Product code: W0088
Inertial puller for car injectors, Audi, VW / TD, TDI, with 2 axles
Inertial puller for car injectors, Audi, VW / TD, TDI, with 2 axles (125mm, 250mm)
Product code: W0064
Injector puller set 1.5 DCI Delphi (14x1.5) Renault, Nissan
Injector puller set 1.5 DCI Delphi (14x1.5) Renault, Nissan
Product code: W0247
Adapter for Opel, Fiat, Alfa Romeo 1.9 JTD injector pulling
Adapter for Opel, Fiat, Alfa Romeo 1.9 JTD injector pulling.
Product code: W0281
Adapter for injector valve pulling Opel DTI - diesel
Adapter for injector valve pulling Opel DTI - diesel
Product code: W0226
Set for knocking injectors Opel Renault 2.0 DCI / CDTI and others (hardened)
Product code: W0389
Injector puller DTI Opel - Diesel common rail
This injector puller can be used to remove common rail diesel engine injectors from Opel vehicles.
Product code: W0221
Injector puller for removing Denso injectors M25x0,5 on Toyota and Mazda
The Injector Puller designed specifically for removing Denso injectors with an M25x0.5 thread on Toyota and Mazda vehicles is a versatile and reliable tool engineered to simplify the injector removal process.
Product code: W0535
Inertial puller for car injectors, Mercedes CDI, VW 1.9TDI and 2.5TDI
It helps apply a strong and controlled force to pull the injectors out of their seating.
Product code: W0018
Adapter for injector pulling, Mercedes CDI (hardened)
The adapter for pulling the injector is a special tool used in Mercedes CDI diesel engines. This adapter is made of hardened material to withstand the high pressure and load generated when removing the injectors.
Product code: W0053
Denso injector adapter puller M20x1 (hardened)
Product code: W0639
Injector puller Opel Vivaro 2.0 CDTI
Injector puller Opel Vivaro 2.0 CDTI
Product code: W0220
Set of 3 Adaptors For Pneumatic Injector Puller (REF.JBM54186)
These adapters are an addition to our pneumatic injector puller product (JBM54186) line to provide additional versatility and compatibility with different types of injectors, allowing for a wider range of applications.