Shield glass antifreeze large (95cm height / width 145-175cm)

Valve Spring Compressor

Valve Spring Compressor is compresses overhead valve springs with rocker arm studs. This tool can be used with the head either on or off the engine. Jaws adjust to fit most overhead valve engines. Adjustable handle allows for clearance in tight areas.

Product code: MG04A2170

Puller arm forward bushing Renault Laguna I (under a hydraulic press)

Puller arm forward bushing Renault Laguna I (under a hydraulic press) (nr. oe 77 00 822 503)

Product code: W0170

Puller arm forward bushing Renault Laguna I

Puller arm forward bushing Renault Laguna I (nr. oe 77 00 824 042)

Product code: W0171

Rear beam bushing puller BMW E32 / E34 (nr. oe 3331112670)

When working on a BMW 5 Sedan (E34), BMW 5 Touring (E34) or BMW 7 (E32), the rear suspension bushing puller makes it easy to remove the bushings from the suspension. This tool provides the proper grip and power transfer to easily and safely remove bushings from the suspension.

Product code: W0181

Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot

Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot

Product code: W0195

Motorcycle flywheel puller set, 10pcs

Motorcycle flywheel puller set to separate and remove the flywheel and to perform certain repair or maintenance tasks.

Product code: MG04A7005

The wrench for the side pressing nut of the Mercedes steering rack

This tool is ideal for professionals and DIY enthusiasts alike, this tool ensures seamless installation, removal, and adjustment of the steering gear side pressure nut.

Product code: W0728

Wrench for BMW & Mercedes Steering Gear Side Nut

This is a dedicated wrench, purposefully designed for the assembly, disassembly, and adjustment of the side nut in BMW and Mercedes steering gears.

Product code: W0729

Injection pump gear puller Hyundai, KIA 2.5 CRDI

This injection pump gear puller is engineered specifically for removing the sprocket of the high-pressure pump, ensuring smooth and damage-free operations.

Product code: W0730

Timing lock Opel 1.2, 1.2L-T (RPO LIH)

Designed specifically for the Opel 1.2 1.2L-T (RPO LIH) engine, guaranteeing exact alignment and fit during use.

Product code: W0731

MAN front axle cap, 6 teeth, 92.50mm

Designed specifically for MAN trucks, ensuring seamless integration and optimal performance. Meticulously crafted with a 6-teeth configuration, providing superior fit.

Product code: W0732

Socket 6 Teeth, 107mm for Low Floor Trailers

This is an essential tool for professionals working on low floor trailers. Featuring a robust 6-teeth configuration, it ensures accurate engagement and superior grip.

Product code: W0733

Rocker Arm Nut Wrench for Iveco Daily 2006 E4

This tool is specifically tailored to unscrew the nut of the rocker arm.

Product code: W0734

Rear bearing hub puller, Citroen; Peugeot ; Toyota ; Opel after 2016

This tool is designed for the removal and installation of wheel bearings, especially on specific vehicles models after 2016. The design eliminates the need to remove the steering knuckle and ABS sensor and simplifies the repair process.

Product code: W0736

Fuel injector puller and installer tool set for BMW, Mercedes Benz

Designed to facilitate the removal and installation of fuel injectors in BMW and Mercedes Benz vehicles. Made with the highest quality materials to ensure the effective removal and installation of fuel injectors without causing damage.

Product code: JBM54220

Jumbo plastic funnel 28cm

The jumbo plastic funnel is the perfect tool for oil and other liquids to prevent spillage and overflow during filling. Whether you're working with liquids or oils, this funnel makes pouring easy thanks to its long neck design that provides a precise and controlled flow, allowing you to pour exactly where you need it without spills or drips.

Product code: LN-PF-9102

Flexible funnel with filter, 2 in 1

The flexible neck funnel is an extremely practical tool for mechanics, which filters out unwanted particles with the help of a mesh screen and helps in precise and clean pouring of oil and other liquids. The device includes a flexible tube that allows easy access to hard-to-reach areas, making it a very convenient and efficient way to e.g. of the oil change process. The design and material of the device ensure durability and easy cleaning.

Product code: LN-PF-9105

Long neck funnel, 45cm

The 45 cm long neck funnel is the perfect tool for oil and other liquids to prevent spillage and overflow during filling. Whether you're working with liquids or oils, this funnel makes pouring easy thanks to its long neck design that provides a precise and controlled flow, allowing you to pour exactly where you need it without spills or drips.

Product code: LN-PF-9106

Wrench for dismantling Mercedes Benz oil filter 84mm; Angle 14

This special wrench for disassembling the oil filter is specially designed for certain models of Mercedes-Benz and Chrysler. The 84mm x 14kt size and 1/2" drive ensure it fits the filter perfectly, making it easy to remove or replace the filter.

Product code: W0737

Diesel glow plug socket set 3/8", 4pcs

This set includes four sockets, each with a 3/8" drive size, specifically designed to fit and remove diesel glow plugs.

Product code: MG96446

Double flaring brake line tool kit, 13pcs

Double flaring brake line tool kit the primary tool for chip-free and parallel cutting as well as pipe flanging.

Product code: MG99066

Double flaring brake line tool kit, 11pcs

It is suitable for making double edges of copper, aluminum, magnesium and brass pipes, as well as soft steel (max. 1mm thick) pipes. For vehicle brake pipes, cooling and heating pipes.

Product code: MG99071

Pulley puller, universal

Using the tool, the timing wheel can be removed from the shaft quickly and without damage. Its design allows it to be used in many types of cars. Solid metal design. The puller fits well in the wheel, with 8 grooves, the legs can be fixed in several positions.

Product code: MG04A2240

Valve Lapping Tool Attachment, 6 parts

Using a Valve Lapping Tool Attachment to grind the valves.

Product code: MG04A2269A

Fuel line connector pliers

Fuel line connector pliers is suitable for releasing connections on fuel pipes during maintenance or when replacing fuel filters. It is designed to compress the quick connect lugs for easy removal without damaging the connector.

Product code: MG04A3034

3-leg oil filter wrench, two way

3-leg oil filter wrench, two-way is a tool that helps you replace or remove oil filters. The tool has 3 adjustable claws that clamp the oil filter and allow it to be easily removed or installed.

Product code: MG04A5021

Oil filter chain wrench

Oil filter chain wrench

Product code: MG04A5098

Universal Clutch Aligning Tool Kit, 10pcs

The Universal Clutch Aligning Tool Kit can be used to adjust the position of the clutch shaft during installation or after replacement.

Product code: MG04B1082

Ball joint separator 19-22mm

Steering rods, stabilizers, etc. designed to remove ball-jointed rotating parts.

Product code: MG04B3022

Ball joint separator 18mm

Steering rods, stabilizers, etc. designed to remove ball-jointed rotating parts.

Product code: MG04B3022A

Hose clamp set, 4pcs

Hose clamp set, 4pcs are light and compact steel alloy construction for ease of use where space is limited.

Product code: MG04B4018

3-Jaw Internal & External Puller Set

Can be used for pulling automotive parts, wheel bearings, gears and more. Comfortable T handle provides secure grip while working.

Product code: MG04J1011

7pcs Drive Shaft Puller / Extractor Set

The 7pcs Drive Shaft Puller / Extractor Set is suitable for pulling the half-axle into the wheel hub. In order to be able to carefully and evenly insert the half-axle into the wheel hub, it is necessary to use the appropriate adapters and accessories from the drive-in tool, so that the half-axle goes in securely and straight.

Product code: MG50046

Valve spring compressor set

A kit used to remove and install a valve spring with the cylinder head still on the engine and in the car or with the cylinder head removed. High capacity valve spring compressor tool.

Product code: MG50103A

Glow/Spark Plug Socket Set, 6pcs, 3/8"

The tool set are specially designed to fit and securely grip the spark plugs or glow plugs during installation or removal.

Product code: MG50377

Extra-long pick and hook set, 6pcs

Suitable for removing O-ring clips or seals. Extra long pick and hook set is ideal for removing and replacing parts in hard-to-reach areas, as well as for precise handling of pipes, seals and wires.

Product code: MG92506

Spark/Glow plug and oxygen sensor master service set, 11pcs

Forged Chrome Vanadium master service set for the professional. Includes all the sockets and extensions required to remove/install sprak/glow plugs and oxygen sensors on most modern vehicles.

Product code: MG92585

Flywheel locking tool for 1.3 TCe engines

Flywheel locking tool for Mercedes-Benz 1.3M, Dacia, Nissan 1.3 TCe, Dacia 0.9, 1.6 petrol engines

Product code: C01/0262

Fuel Tank Sender Wrench

Universal fuel tank cap wrench, which can be adjusted between 89mm-170mm, so it is a suitable choice for many types of cars. With 15mm drive.

Product code: MG04A3067

Rear axle bushing press for Toyota Yaris, Passo, Echo

The Rear Axle Bushing Press is designed to facilitate the installation or replacement of rear axle bushings in Toyota Yaris, Passo, and Echo models. Rear axle bushing press for Toyota Yaris, Passo, Echo. Bushing

Product code: W0720

Oil drainer with vacuum cleaner

This is an innovative and highly efficient product tailored for diverse applications in the automotive, heavy-duty, industrial, marine and farm sectors. This tool is designed to revolutionize the way you handle oil and fluid changes, providing a cleaner, safer, and more environmentally friendly method of draining and disposing of used oil.

Product code: LN-ODT30-E

The Universal Flaring Tool Kit Adjustable (5-16mm)

The Universal Flaring Tool Kit Adjustable (5-16mm) is designed to create conical or tapered flares on brass and aluminum pipes. It is adjustable and can accommodate a range of sizes from 5mm to 16mm (3/16" - 5/8").

Product code: MG04D1013

A/C Compressor clutch remover kit

A special kit with elements that fit into a wide variety of A/C compressors. It is easy to remove and mount the Clutch Compressor Clutch Disc.

Product code: MG04D1003

Spoon Tip Seal Removal Set, 4 pcs

The 4-Piece Spoon Tip Seal Removal Kit includes tools to easily remove seals and O-rings. It is characterized by rounded tips and blended edges.

Product code: MG04C2007

Cylinder Scraper Set

This kit is designed for scraping cylinders. They can be of great help, e.g. during engine rebuilds or engine repairs, when, for example, the inner surfaces of the cylinders need to be cleaned or renewed.

Product code: MG04C1025

10pcs double pipe flaring tool set

The function of the double pipe flaring tool set is to strengthen and protect the end of the brake pipe at the connection point, thus ensuring safe operation and a longer service life. It is suitable for making double edges of pipes. For vehicle brake pipes, cooling and heating pipes.

Product code: MG04B4092M

10pcs double pipe flaring tool set

The function of the 10pcs double pipe flaring tool set is to strengthen and protect the end of the brake pipe at the connection point, thus ensuring safe operation and a longer service life. It is suitable for making double edges of pipes. For vehicle brake pipes, cooling and heating pipes.

Product code: MG04B4092A

Professional tube bending tool for diameters 5, 6, 8, 10mm

Makes perfect bends in aluminum, copper and steel pipes.

Product code: MG04B4019

Hose Clamp Pliers

Especially designed for working with progressively adjustable clamps commonly found on axle boots of vehicles from Volkswagen Audi Group (VAG), Mercedes, and Toyota. The pliers provide an efficient and safe way to install or remove these clamps, making them a valuable addition to any automotive toolkit.

Product code: MG04B1065

Digital Display Timing Light

A Digital Display Timing Light is an important tool in car repair, especially for diagnosing and repairing problems related to the ignition system. A strobe light can be used to precisely adjust the mechanical or electronic glow system to match engine speed, resulting in greater fuel efficiency and improved performance.

Product code: MG04A6014

Adjustable Seal Puller

Adjustable Seal Puller is easy to use and ideal for everyone to maintain and remove seals. It is most often used to remove seals found in car engines and other machinery. The tool is thin with a pointed tip to fit easily into tight spaces and to cause as little damage as possible to surrounding components.

Product code: MG04A5061

Condenser - Fin Comb

The Condenser - Fin Comb is a practical tool that enables easy and efficient maintenance of the radiator grills. The device is suitable for cleaning refrigerators, air conditioners, car coolers or any device that has fins. Removes dust, dirt and impurities easily.

Product code: MG04A4012

Fuel Feed Pipe Pliers

The Fuel Feed Pipe Pliers are excellent for disconnecting fuel connectors for fuel filter replacement or engine repair.

Product code: MG04A3074

Exhaust Hanger Removal Pliers

Removal pliers are a special tool that allows you to easily and safely remove and reassemble the exhaust system without damaging the connections or seals. It enables easy, quick and one-handed use when removing the rubber strap.

Product code: MG04A2301

Exhaust backpressure test kit

The tool allows auto mechanics and vehicle owners to easily check that the exhaust system is working properly and that there are no issues with exhaust backpressure.

Product code: MG04A2167

Exhaust spring clamp remover

An exhaust spring clamp remover is required for the professional and safe installation of the spring. Used to remove and install fasteners. Made of high quality steel. Can be used with a 17 mm socket or wrench.

Product code: MG04A2087

Wire Terminal Connect Tool, 2pcs

Wire Terminal Connect Tool, 2pcs is designed to remove wire connectors from terminal blocks without causing damage. Includes 12 different tool styles carefully designed to fit the most common connectors, ensuring compatibility and ease of use.

Product code: MG04D2038

Motorcycle front axle hex socket set, 6pcs

Motorcycle front axle hex socket set, 6pcs a comprehensive tool kit designed to simplify the process of tightening or loosening the wheel nut on your motorcycle. This set includes 6 different internal hexagon sizes.

Product code: MG04J1250

Vacuum and pressure gauge

Measuring range (pressure) 0.1bar, 14, 18mm coupling adapter

Product code: MG50190

Citroen, Peugeot exhaust pipe clamp remover

Especially for removing and installing Citroen, Peugeot, Renault exhaust clamps.

Product code: MG50485

Oil filter wrench 80mm 14 angles. Kia/Hyundai 1.6 CRDI

This precision-engineered 80mm 14-angle oil filter wrench is an essential tool for efficient oil filter replacement on select Kia and Hyundai models. The wrench is a perfect fit for 1.6L D4FE (U3) diesel engine codes, allowing for easy filter removal and installation. Its compatibility extends to newer models of both brands.

Product code: W0738

2-jaw and 3-jaw gear puller set

2 or 3 jaws that can be adjusted to fit various sizes of gears, pulleys, bearings, and other components.

Product code: MG04J1125

Brake piston wind back tool set, 18pcs

Designed to push back or wind back brake pistons. Includes left-handed and right-handed thrust bolt assemblies.

Product code: DK-230542

Universal brake caliper wind back tool kit, 16pcs

Pneumatic rewind tool for disc brake pistons with adapters. Brand new practical and convenient kit for replacing front and rear disc brake pads.

Product code: DK-230540

Bearing puller set, 9pcs

It’s ideal for removing small gears, wheels, and fittings from shafts also can be used to replace the steering pump, perfect for wiper arm assembly, rebuilding your alternator, removing tightly fitted pulleys, and reaches places that regular gear pullers can’t access.

Product code: DK-230590

Valve spring compression, for overhead valve O.H.C valves

For replacing valve springs and valve stem oil seals without removing the cylinder head. This tool allows you to compress the valves and remove the valve discs without damaging the engine.

Product code: MG50109

Steering rack knuckle tool set, 30-45mm

This steering rack knuckle tool set makes removing and installing steering knuckles fast and easy. With interchangeable heads to fit racks with hex drive, two flats, and round ends from 30-45mm, it's versatile and effective. Drive: 32mm Hex, 1/2" square.

Product code: MG50423

Engine oil filler set, 15pcs

Engine oil filling kit 15 pcs is used for changing the car's oil, it allows you to easily and cleanly fill the engine oil into the engine, minimizing the possibility of contamination and fluid leakage.

Product code: MG04A5115

Cooling system vacuum purge and refill kit, 6pcs

A cooling system vacuum purge and refill kit is used for servicing a vehicle's cooling system. The kit helps to remove any air pockets or bubbles that may be trapped in the cooling system, which can cause the engine to overheat.

Product code: MG04A4010

Steering Knuckle Nut Wrench for Mercedes Actros, Axor, Antos, Arocs

This wrench is designed for unscrewing the steering knuckle nut of specific Mercedes trucks. It offers a precise fit and is compatible with both OEM and certain aftermarket parts.

Product code: W0735

Ball joint separator 39mm

Steering rods, stabilizers, etc. designed to remove ball-jointed rotating parts.

Product code: MG04B3022D

Brake spring pliers

Brake spring clamp for drum brakes. For removing and installing drum brake springs.

Product code: MG04B4039

Spring compressor set

For the removal and fitting of suspension springs on all types of McPherson struts with conical and cylindrical springs on the front and rear axle. 65-125mm, 88-160mm, 125-215mm

Product code: DK-230579A

Sleeve, bearing and silent press kit, 27pcs

Inside diameters from 34-80mm in 2mm steps, outside diameters from 44-80mm in 2mm steps, pulling spindles with nuts.

Product code: DK-230581A

Adjustable timing pulley puller

An adjustable timing pulley puller is a special tool used in the assembly process of engines.

Product code: MG04A2213

Ball joint separator set, 5pcs

Ball joint separator set, 5pcs ideal for assembling and disassembling wishbones,, ball joints, socket joints, tir rods and individual gimbal joints.

Product code: MG04B3051

Stud Wrench 8" 12-21mm

Fully adjustable with a one-handed squeeze. Efficient ratcheting by releasing, then re-gripping the object. Often removes nuts and bolts damaged by other tools.

Product code: G00860

Brake piston presser. Max 70mm jaw spread.

Essential tool for pressing in the brake piston to allow insertion of new brake pads.

Product code: G02534

Wiper arm puller

Wiper arm puller. The puller is used to remove car wiper arms. Made of durable chrome-molybdenum steel.

Product code: G02770

Shaft locking pin for VW TSI, FSI, TFSI engines

Shaft locking pin for VW TSI, FSI, TFSI engines

Product code: C01/0090

Universaladjustable fuel tank lid remover

Universaladjustable fuel tank lid remover, which can be adjusted between 80mm-199mm, so it is a suitable choice for many types of cars.

Product code: MG04A3077

Timing lock Porsche 911, Boxster, Cayman 2.7, 3.2, 3.4, 3.6, 3.8

This tool is used to lock the engine's timing components in place during maintenance or repair procedures, ensuring precise alignment and synchronization of the camshafts and crankshaft. Accurate timing is essential for optimal engine performance and efficiency.

Product code: W0626

Fuel filter wrench for Ford Transit 2.2 TDCI

Fuel filter wrench for Ford Transit and Tourneo 2.2 TDCI. Used for the removal and installation of fuel filters in the specified vehicles. Provides a secure and reliable grip on the fuel filter, facilitating easy loosening and tightening. Constructed with robust materials to ensure long-lasting performance.

Product code: W0625

Lock balancer shaft BMW N20 / N26 + Repair kit seal oil pump

Product code: W0618

Air conditioner clutch holding wrench, adjustable

A/C clutch holding wrench, adjustable.

Product code: W0616

Wrench for KM13 bearing nuts

Wrench for KM13 bearing nuts with an outer diameter of 91mm and an inner diameter of 78mm, this wrench provides a secure and accurate grip on the specific size of KM13 bearing nuts.

Product code: W0592

Oil drain socket set 12pcs

Oil drain hex and square sockets set. Square: 8, 11, 13mm. Hex: 8, 9, 10, 12, 14, 17mm.

Product code: CHS-E1156

High pressure pump sprocket lock for VW, Audi 3.6 V6 engines

High pressure pump sprocket locking tool for VW, Audi 3.6 V6 4V engines (OEM T10332)

Product code: W0580

Wrench for the front swingarm pivot pin caps on Citroen, Peugeot, Toyota

Socket wrench for the front swingarm pivot pin caps on Citroen (Jumpy, SpaceTourer), Peugeot (Expert, Traveller), Toyota (Proace) suspensions. 2016 and on.

Product code: W0577

Key/nut for the bearing nut KM 10, internal stud bolt

This tool is provide a secure fit and facilitate the proper tightening or loosening of the locknut during bearing installation or removal processes. The key/nut is manufactured using hardened, high-grade materials to ensure durability and strength, making it capable of withstanding the forces involved in working with bearings and locknuts.

Product code: W0573

Key / nut for the bearing nut KM 7 , studs internal

Product code: W0569

Lock nut socket wrench, grooved, KM7

Lock nut socket wrench, grooved, KM7.

Product code: W0545

Cap / key of the bearing grooves 8 hp; 58mm

This cap/key is designed for bearings with 8 grooves and a diameter of 58mm. It is constructed using high-grade materials, ensuring durability and reliability during use. The purpose of the Bearing Groove Cap/Key is to provide a secure fit over the bearing, allowing for easy installation, removal, or adjustment.

Product code: W0544

Camshaft Lock BMW M62 Vanos

Product code: W0543

Rear bushing puller for Opel Corsa B, C, Tigra

Rear silent puller for Opel Corsa B, C, Tigra. Opel OEM: 24443815, 5402636.

Product code: W0539

Lock timing Opel 1.6 SIDI Pertol

Product code: W0533

Crankshaft rear oil seal replacement tool for Iveco, Fiat, Citroen, Peugeot 3.0

Crankshaft rear oil seal replacement tool for Iveco, Fiat, Citroen, Peugeot 3.0, 13x12.5 (Corteco, DT, LEMA, Ajusa)

Product code: W0522

Puller sleeve back beam (middle) BMW 5 (E 60, E61) BMW 6 (E63, E64) (oem 33176770825)

This tool allows easy and safe removal of the center silencer from the rear beam without disassembling other components or the entire beam system.

Product code: W0520

Puller hub bearing the brake disc Ford Transit

The puller hub bearing the brake disc is a special tool used for mounting and dismounting brake disc bearings on Ford Transit vehicles.

Product code: W0500

BMW crankshaft pulley turning tool

BMW crankshaft pulley turning tool for M47, M57, N47, N57.

Product code: W0498

Puller hub bearings Renault Trafic, Opel Vivaro 2.0 DCI

Product code: W0487

Lock pulley shaft Volvo (T4, T5) 1.6, 2.0 GDTI

Product code: W0486

Puller / Press sleeve metal - rubber arm rear longitudinal Honda Civic, CR-V, Concerto, CRX, Rover 200 (OE-sleeve 52385 SR3-000)

Product code: W0485

Fuel pump wrench for Volkswagen Crafter 2006-2016

The Fuel Pump Wrench Volkswagen Crafter 2006-2016 is a specially designed wrench ideal for loosening the fuel pump nut. This key is made of high quality material and perfectly fits Volkswagen Crafter 2006-2016 vehicles. Thanks to its ease of use, you can easily and quickly carry out the necessary maintenance work.

Product code: W0483

Lock timing Audi 2.8 FSI / FSI 3.2 / 3.0 TFSI

This tool helps immobilize various components during timing belt or chain replacements, ensuring precise alignment and preventing any unwanted movement.

Product code: W0481

Flywheel and injection pump locking pin for BMW

Flywheel and injection pump locking pin for BMW. M40, M42, M43, M44, M50, M52, M52TU, M54, M56 engines.

Product code: W0460

Key clutch disc air conditioning Denso 23 mm (hardened)

Product code: W0448

Front crankshaft oil seal puller for Iveco, Fiat 2.3

This tool is designed to extract the front oil seal safely and efficiently without causing damage to the seal or the crankshaft.

Product code: W0437

Crankshaft front oil seal puller for Iveco 3.0

The crankshaft front oil seal puller is a specialized tool designed to remove the front oil seal without causing damage to the crankshaft or engine components.

Product code: W0434

Oil suction gun. Capacity: 500ml

Oil suction gun is suitable for removing or replacing oil in engines and gearboxes.

Product code: G01150

Power steering pump puller

This tool facilitates the safe removal of the power steering pump.

Product code: W0430

Puller sleeve front beam Mercedes ML W163 (oe bushings 163 330 02 75/1633300275)

Product code: W0428

Puller of bushings of the front control arm Volkswagen T4

The puller is used to install and remove control arm bushings on the car.

Product code: W0427

Puller injectors 2.0 HDI

Product code: W0411

Press the king pins the upper and lower Jeep - Cherokee, Grand Cherokee, Wrangler

The tool is used to remove and install the kingpins in the steering knuckle assembly. Use the king pin press tool to press out the king pin from the steering knuckle. The tool will apply force to push the pin out of its housing. Once the king pin is pressed out, you can inspect it for wear or damage and replace it if necessary.

Product code: W0401

Timing lock for Ford 1.8, Mazda 2.0, 2.3 turbo

Timing lock for Ford 1.8, Mazda 2.0, 2.3 turbo. 2003-2013. Engine codes: CFBA, L3 Turbo, LF(MZR DISI), MZR 2.0(LF).

Product code: W0373

Puller sleeves left front beam Ford Focus II; III; C-Max; Volvo (no oe sleeves 1695011, 1355621, 1695011,23032, 30666042, FM-FOC

Product code: W0369

Wrench nut bolt Mercedes ML - W 163 ML ; W 164 ML

Wrench nut bolt specifically designed to fit and loosen/tighten the nut bolts used in various components of the vehicle. These nut bolts can be found in different areas of the ML, such as the suspension, engine, or other mechanical parts.

Product code: W0366

Key injector Volkswagen 24 angle

Product code: W0365

Socket wrench key for Citroen and Peugeot swingarms

Socket wrench key for Citroen Berlingo, C4 and Peugeot 307, 308, 5008 swingarms.

Product code: W0362

Puller for wheel hub / bearing rear swingarm Mercedes Vito Viano 2.2 CDI after 2003

This puller is designed to safely and efficiently separate the wheel hub or bearing from the swingarm assembly.

Product code: W0361

Front hub nut wrench for Iveco Daily (2014 and after)

Front hub nut wrench for Iveco Daily (2014 and after).

Product code: W0354

Brake fluid tester

Brake fluid tester is designed to analyze the amount of moisture content within the brake system.

Product code: MG04D7012

Puller bushings rear beam Renault Laguna II (to no of original sleeves with flat his back)

Product code: W0329

Mercedes Benz CDI Diesel Engine Glow Plug Extractor Remover and Repair Kit

Mercedes Benz CDI Diesel Engine Glow Plug Extractor Remover and Repair 3-pieces Kit.1 pc tapered reamer hex:6x10mm, 1pc tapered reamer hex 7x13mm, 1pc glow plug extractor for glow plug threads hex 10x19mm

Product code: MG04A6016

Camshaft lock for Fiat Panda 1.1 Eco and 1.2 engines

Camshaft and crankshaft locking kit for changing the timing belt. Allows you to set the timing in the correct position. Includes camshaft alignment bracket and crankshaft lock.

Product code: W0325

Wrench for the injection pump of diesel Mercedes Benz engines

Key for MRSF-ERE injection pumps found in Benz diesel engines.

Product code: W0324

Kingpin adapters for crossovers Jeep - Cherokee, Grand Cherokee, Wrangler

Our set of 4 adapters is designed to simplify the mounting and dismounting of kingpins without the need to remove the steering knuckle.

Product code: W0312

Wheel hub nut socket wrench for Renault

Wheel hub nut socket wrench for Renault Mascott, Midlum, Premium (nut OEM 5010372353).

Product code: W0309

Puller for wheel hub / bearing VW Polo, Seat, Skoda, Audi A2-puller with ABS and without ABS

This puller is specifically designed to handle wheel hubs and bearings on VW Polo, Seat, Skoda, and Audi A2 vehicles. Whether your vehicle is equipped with ABS or without ABS, this versatile tool ensures a secure grip and effortless removal.

Product code: W0306

Air conditioning clutch wrench, 28-29mm

Designed for securely locking the air conditioning clutch, ensuring reliable maintenance and repairs on vehicle AC systems. With it's size allowing for a versatile fit across various air conditioning clutches.

Product code: W0265

Timing tool set, Mitsubishi 1.8 - 3.5 16V

This Timing tool set is of high quality and precisely dimensioned to ensure a stable fixing of the engine timing system. The reliable fastening allows easy and efficient removal and installation of control discs, timing belts or other timing system components.

Product code: W0261

Puller sleeve upper arm rear lateral (crescent / banana)

Puller sleeve upper arm rear lateral (crescent / banana) Ford Focus I, II Sedan, Combi, Ford C-Max, Mazda 3, 5; Volvo S40 II, V5

Product code: W0254

Universal camshaft pulley locking tool set, 4 pairs of bit adapters

Universal camshaft pulley locking tool set, 4 pairs of bit adapters.

Product code: W0238

Double-row bearing puller and wheel hubs II version (BMW, Mercedes etc.)

Double-row bearing puller and wheel hubs II version (BMW, Mercedes etc.)

Product code: W0205

Timing tool set Fiat Ducato 2.2 JTD

Timing tool set Fiat Ducato 2.2 JTD

Product code: W0204

Puller sleeve (only for pressing) of the rear beam Citroen, Peugeot

Puller sleeve (only for pressing) of the rear beam Citroen C4, Peugeot 307.

Product code: W0186

Camber angle setting tool

A useful tool for adjusting the angle of the wheel, mounted between the rim and the body. Correct wheel angle adjustment is important for vehicle handling, steering and wheel wear.

Product code: W0183

Timing tool set Volvo V 50 16 V 1.8 / 2.0 with chain - petrol

This timing tool set is designed for Volvo V50 16V 1.8 and 2.0 inline petrol engines. The tools are designed to make engine control setup and maintenance easier and more accurate.

Product code: W0177

Front, lower suspension bushing press for Opel Astra G, H, Zafira

Front, lower swing arm bushing puller for Opel Astra G , H , Zafira. Removes and installs silent blocks. OE: 352 364.

Product code: W0175

Crankshaft pulley puller VW / Audi 4 and 5 cylinder

Engineered specifically for the removal of crankshaft pulleys in certain VW and Audi vehicles. Ensures smooth and damage-free extraction of crankshaft pulleys, a vital component in the engine's belt system.

Product code: W0173

Timing tool set Alfa Romeo 1.8 / 2.0 16V, 2.0 TS (blue)

This Timing Locking Tool allows you to lock engine camshafts, which is essential for timing chain replacement, timing pulleys, timing belts or other timing system component maintenance.

Product code: W0169

Hub Puller VW, Seat, Skoda-Puller with ABS and without ABS

The tool is suitable for removing the wheel hubs of both vehicles with and without ABS. Therefore, it can be widely used when servicing VW, Seat and Skoda models. The tool fits exactly on the hub and provides the right grip to pull the hub off efficiently and safely.

Product code: W0163

Press and puller for ball joints Renault, Opel, Iveco, VW, Nissan, Mercedes etc., 20 adapters

Universal press and puller for ball joints Renault, Opel, Iveco, VW, Nissan, Mercedes etc., with 20 adapters. For models manufactured in 2006 and on.

Product code: W0162

Adapter to remove the pins down on the Renault Master 2006

Adapter to remove the pins down on the Renault Master 2006

Product code: W0160

Adapter for testing fuel injection Diesel trucks

Adapter for testing fuel injection Diesel trucks MAN 2866, 2566, DB OM 401, 421, 441

Product code: W0145

Universal puller (screw L=100mm, hole distance 27-62mm)

Universal puller (screw L=100mm, hole distance 27-62mm)

Product code: W0136

Universal camshaft pulley holding tool, 21-100mm

Universal camshaft pulley holding tool, 21-100mm. For Mercedes Benz, Bmw, Ford, Mitsubishi, Honda, VW, Audi, Nissan, Toyota, Volvo, etc.

Product code: W0132

Injection pump gear remover tool for BMW 2.0, 3.0

For installing and removing the injection pump in BMW diesel engines.

Product code: W0122

Press for dismantling and mounting of lower bolts, IVECO

Press for dismantling and mounting of lower bolts, IVECO

Product code: W0115

Puller for rear beam sleeve, BMW E39 touring

The tool precisely fits the rear suspension bushings of the BMW E39 Touring and can be used to easily remove and install the bushings without damaging the components.

Product code: W0113

Adapters for press, puller for bolts, Master, Movano, Interstar

Adapters for press, puller for bolts, Renault Master, Opel Movano, Nissan Interstar

Product code: W0098

Wrench for damper pin locking/unscrewing, Ducato, Jumper, Boxer

This specialized wrench is exclusively designed for the precise task of locking and unscrewing damper pins on vehicles like the Ducato, Jumper, and Boxer.

Product code: W0090

Silent block puller for BMW E38, E39, E60, E63, E65, E53, X5, Z8 passanger cars

Extractor for removing and fitting the silent block on the rear axle link arm on BMW passanger cars.

Product code: W0087

Wrench for truck injectors, MAN, Mercedes (Euro-2), 72mm

Wrench for truck injectors, MAN, Mercedes (Euro-2). Length: 72mm, diameter 22mm, square drive: 1/2"

Product code: W0075

Puller for belt pulleys, four-arm

Puller for belt pulleys, four-arm is a high-quality and efficient tool that makes belt replacement and maintenance easier. This extremely useful tool allows precise adjustment of the tension of the belts.

Product code: W0073

Puller for valve springs for 8V, 12V, 16V motors, with additional adapters

Puller for valve springs for 8V, 12V, 16V motors, with additional adapters

Product code: W0071

Puller for belt pulleys, three-arm with extended arms

Puller for belt pulleys, three-arm with extended arms

Product code: W0070

Puller for belt pulleys, three-arm

A puller for removing gears. Central screw diameter: 16mm. Adjustable clamping diameter: 42-82mm. Arm length: 35mm. Full length: 55mm.

Product code: W0068

Inertial puller for car injectors, CDI and others, with 3 axles

Injector puller with sliding hammer, for CDI and other engines, with 3 shafts (200mm, 240mm, 280mm)

Product code: W0063

Valve sealing install set, 6mm, 7mm, 8mm, universal

Valve sealing install set, 6mm, 7mm, 8mm, universal

Product code: W0059

Sleeve puller, rear beams, Fiat Punto

Sleeve puller, rear beams, Fiat Punto

Product code: W0058

Front arm bushing puller BMW E39

The Front Arm Bushing Puller BMW E39 is a tool designed to remove the front arm bushing from the BMW E39 model.

Product code: W0057

Adapters for press, puller for bolts, Renault Master, Opel Movano

Adapters for press, puller for bolts, Renault Master, Opel Movano. It cooperate with W0027 and W0045 presses.

Product code: W0046

Glow plug removal and thread repair set for 8, 10mm glow plugs

Remove stubborn glow plugs with ease using our Glow Plug Removal and Thread Repair Set. Suitable for 8 and 10mm glow plugs, it allows for easy removal and installation while cleaning the seat and rethreading damaged plugs. Contents include a variety of adapters and rethreaders.

Product code: MG50339

Timing belt and injection pump pulley puller

This puller is a go-to tool for removing timing belt and injection pump pulleys from a wide range of engines, including those found in the VW Audi group and other compatible vehicles.

Product code: W0033

Press for silents and ball joints, for VW T4, Mercedes Sprinter, VW LT

Press for mounting and removing silents in the suspension arm in VW T4, VW LT and Mercedes Sprinter 1999-2006 without having to remove the arm from the vehicle.

Product code: W0027

Front swing arm bushing puller VOLVO S60 I, S80 (TX, XY), V70 I and II

This tool is meticulously designed for the installation and removal of front swing arm bushings in VOLVO vehicles.

Product code: W0482

Rear control arm bushing puller for BMW

Rear control arm bushing puller for BMW E60, E61, E63, E64, E65, E53.

Product code: W0376

Puller sleeve right front beam Ford Focus II; III; C-Max; Volvo (no oe. 1326988, 4M515L021AB, 1326988, 23033, 30714550, FM-FOC5

Product code: W0370

Socket wrench for M52x1.5 Mercedes Vario rear hub nuts

Our Socket Wrench for M52x1.5 Mercedes Vario rear hub nuts is the perfect tool for unscrewing wheel hub nuts on the rear axle of your Mercedes Vario (1996-2013). With an OE code of 6743560126, this wrench offers precise and efficient performance. Get yours today!

Product code: W0338

Universal ball joint puller for pins up to 20mm in diameter.

Universal ball joint puller with lever. Made of forged steel. Its compact size allows you to work in hard to reach areas.

Product code: G02583

Viscous clutch wrench Mercedes Sprinter 3.0 V6 CDI

Viscous clutch wrench for Mercedes Sprinter 3.0 V6 CDI, 4.0 V8 CDI, 642 3.0 CDI.

Product code: W0228

Oil drain repair cutter, Volkswagen

Oil drain repair cutter, Volkswagen

Product code: W0166

Alternator clutch pulley removal tool for VW, Seat, Skoda 2.0 TDI

The Alternator clutch pulley removal tool for VW, Seat, Skoda 2.0 TDI engines is a specialized tool for removing the alternator clutch disc. This tool ensures the stability and position of the generator shaft while spinning the disc, allowing for safe and efficient maintenance.

Product code: W0647

Exhaust fume extractor for motorcycles

Mobile exhaust fume extractor, suitable for motorcycles. Air flow 420m3/h, adjustable height 250-1350mm, hose thermal stability 110°C, diameter 121mm, length 6m

Product code: 5020

Service wrench for initial chamber 1/2", 60mm

Service wrench for initial chamber 1/2", 60mm

Product code: W0081

Oil drain plug socket set of 23pcs

Oil drain plug socket set, 23 pieces for quick and easy oil change.

Product code: DK-122303

Flat staples for hot stapler 0.8mm

Flat staples for hot stapler ø=0.8mm wire, 100pcs

Product code: 804076

Nut cap for Goldhofer THP/SL4 trailer; 6 teeth, teeth inside

The Nut Cap with 6 internal teeth and a tooth distance of 107 mm is a specialized component used in Goldhofer THP/SL4 semi-trailers to secure and maintain critical parts of the trailer's assembly.

Product code: W0726

Camshaft locking bar for Ford 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V engines

Camshaft locking bar for Ford 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V engines

Product code: C01/0001

Timing lock for Opel 1.4

Timing lock for camshaft and chain sprocket on Opel 1.4 petrol engines (2010-)

Product code: C01/0025

Camshaft lock for Opel 1.0 petrol engines with timing chain

Camshaft lock for Opel and Chevrolet 1.0 petrol engines with timing chain (2010-).

Product code: C01/0026

Timing lock set for Opel 1.0 petrol engines with control chain

Timing lock set for Opel 1.0 petrol engines with control chain (2010-).

Product code: C01/0029

Flywheel locking tool for Ford 1.8 TDi / TDdi / TDCi, 2.0 TDCi, 1.6 Ti-VCT engines

Flywheel locking tool set for Ford. The lock is needed for replacing the crankshaft pulley and timing belt. The set can be used petrol and diesel engines.

Product code: C01/0044

Timing lock for BMW M52, M54, M56, M52TU engines

Timing lock for BMW M52, M54, M56, M52TU engines with Vanos system.

Product code: C01/0051

Timing lock for Ford 2.0l Ecoboost engine

Timing lock for Ford 2.0l Ecoboost engines with direct injection and with chain variable timing.

Product code: C01/0055

Flywheel locking tool for Ford diesel, petrol and Ecoboost engines

Four interchangeable crankshaft locking adapters required for replacing and repairing the crankshaft pulley and replacing the Ford timing belt - for gasoline, diesel engines and Ecoboost 1.0.

Product code: C01/0063

Crankshaft lock for Audi 3.0 V6

Locking pin for crankshaft of Audi 3.0 V6 petrol engines

Product code: C01/0081

Camshafts and crankshaft locking tool for VW 1.4 / 1.6 FSI, TFSI engines

Camshaft and crankshaft locking tool for VW 1.4 / 1.6 FSI, TFSI engines. 1.4 and 1.6 FSI Twin Cam (03-11) - engines with a timing chain.

Product code: C01/0089

Socket for removing rear axle nut in Mercedes Vario

Socket for removing rear axle nut in Mercedes Vario.

Product code: C01/0164

Camshaft lock for Fiat 1.3 JTD Multijet, Opel 1.3 CDTI engines

Camshaft lock for Fiat 1.3 JTD Multijet, Opel 1.3 CDTI diesel engines (Opel Agila, Corsa, Combo, Astra, Tigra, Meriva, Fiat Panda, Idea, Doblo).

Product code: C01/0170

Timing locking pins for Fiat 1.2, 1.4 T-Jet

Timing locking pins for Fiat, Lancia 1.2, 1.4 16V T-Jet petrol engines.

Product code: C01/0180

Jaguar and Land Rover timing tools set for JLR 2.0 Diesel AJ200 engines

Jaguar and Land Rover timing tools set for JLR 2.0 Diesel AJ200 engines. The kit contains all the essential components required to lock the new JLR 2.0L “Ingenium”.

Product code: C01/0219

Timing tool for Fiat 500X and Jeep Renegade 1.0 and 1.3 petrol engines

A set of professional tools for setting, adjusting and locking the timing of the Fiat and Jeep Renegade engines (Petrol (2018-2022 and onwards).

Product code: C01/0258

Bushing and silent puller adapter set for VW T4, LT, Sprinter, Movano, Master

Bushing and silent puller adapter set for VW T4, VW LT, Mercedes Sprinter, Opel Movano, Renault Master.

Product code: C02/0141

Adapter set for link pivot pin bushings and silents in Renault, Opel and Nissan cars

Adapter set for silents of upper link pivot pins in Opel Movano, Renault Master, Nissan Interstar.

Product code: C02/0147

Hex key for Bosch injector valve

H10 hex wrench with a 7.5mm hole for disassembly of Bosch injector valves.

Product code: C04/0087

Injector puller for VW 2.0 TDI engines

Injector puller for VW 2.0 TDI engines.

Product code: C04/0093

Adapter for extracting VW TDI PD injectors

Adapter for extracting VW TDI PD injectors

Product code: C04/0097

Bushing extractor and installer for Ford and Volvo

The tool is used to install and extract bushings and silents without disassembling the control arm. Enables the replacement of bushings in 4-wheel drive (4x4) cars.

Product code: C04/0211

Crankshaft rear oil seal replacement tool for Iveco, Fiat Ducato 2.3 engines

Replacement tool for crankshaft rear oil seal tool for Iveco, Fiat Ducato 2.3

Product code: C05/0216

Suspension support rod measuring tool

The device is designed for precise measurements of the curvature of the front suspension support pipes. Dial indicator not included.

Product code: C06/0212

Universal fuel injector test set 41pcs

The gauges are designed to measure fuel pressure in both low and high pressure systems. The kit includes two gauges, adapters and hoses.

Product code: CHS-A0125

Car stethoscope

The car stethoscope is used for auscultation diagnosis. Eliminates sounds from other points than auscultated. 

Product code: CHS-A1022

Oil pan thread repair set for M14x1.5 pans

Oil pan thread repair set for M14x1.5 pans

Product code: CKB0025-3

Diesel fuel injection pump timing set

Tool for setting diesel injection pump's timing. For Bosch, Lukas, CAV. For cars: Fiat, Lancia, Alfa Romeo, VW, Audi, BMW, Ford, Renault, Rover, Iveco, Mitsubishi, Isuzu and others.

Product code: CKB01610

Pneumatic ATF fluid extractor / dispenser 10l

Pneumatic fluid changer for replacing oil in automatic gearboxes and differential gearboxes. The set includes 13 adapters for a wide range of automatic gearboxes (VAG, BMW, Ford and Mercedes-Benz)

Product code: CKB03689

Internal bearing puller set

Internal bearing puller 10-32 mm. A professional set, necessary in every workshop.

Product code: CKB04004

Set of lambda probe oxygen sensor, vacuum switch remover

Professional set of lambda probe caps 7 pcs. 1/2", 3/8" x 22, 27, 29 mm. Suitable for removing and installing oxygen sensors, oil pressure switches, oil pressure sending units, thermal sensor switches, vacuum switches and break light switches.

Product code: CKB04042

Valve stem seal remover and installer kit

Valve stem seal remover and installer kit. Adapter sizes: 5, 5.5, 6, 6.5, 7, 8, 9.53, 10.8, 14.8mm.

Product code: CKB04046

O-ring and oil seal removal tool

Universal double hook puller for removing O-rings and oil seals.

Product code: CKB04117

3pcs Fuel line disconnector plier set.

3pcs Fuel line disconnector plier set. For G.M., Chevrolet, Buick, Pontiac, Renault, Fiat, Ford, Mercury, Opel, Dodge, Chrysler vehicles.

Product code: CKB04225

Universal valve spring compressor kit

Universal valve spring compressor kit. Designed to enable the replacement of valve springs and valve stem oil seals. Diameters: 34mm, 26mm, 20mm.

Product code: CKBA2308

Diesel Camshaft/Head Rebuild Kit - VAG/Porsche/AUDI T40094/T40095/T40096

This kit is allows you to overhaul the camshaft and cylinder head on VAG, Porsche or Audi common rail diesel engines. It holds the camshaft in the correct position when installing it. Equivalent to the OEM tooling required to allow the camshafts to be correctly fitted into the cylinder head. This is necessary as the cylinder heads on these engines are designed with a camshaft retaining frame that splits from the cylinder head along the centre line of the cam bearing caps.

Product code: MG04A1030

Cooling system and radiator cap pressure test kit, 27pcs

Kit contains 27 pieces of equipment including 22 different test caps, a vacuum pump, pressure pump, cone adapter, and air bleeding/coolant hoses

Product code: DK-230547

Oil filter wrench set, cup type, 15pcs

The set includes 14 filter removal wrenches and a narrowing adapter. All wrenches have 3/8″ square drives. 65 - 100mm

Product code: DK-230525-15

Timing tool set suitable for VW Group 1.6 - 2.0 TDI CR engines - year 2012

This Timing Tool Set is compatible with a diverse lineup of VW Group vehicles, ensuring it covers a broad spectrum of popular models.

Product code: MG04A2184

Valve lapping tool attachment set for drill

Improve engine valve sealing ability and prevent leaks with our Valve Lapping Tool Attachment Set for drill. Use with drills and fine grinding compound. Features 8mm shaft and 4 suction cup diameters. Working speed 1000-1250rpm.

Product code: MG04A2269

Cambelt tension wrench set, 14pcs

Cambelt tension wrench set with 13 interchangeable adapters, suitable for almost all types of vehicles.

Product code: MG04A2305

High pressure pump sprocket remover for Hyundai and KIA

High pressure pump sprocket remover and flywheel lock for Hyundai and KIA. For chain driven 1.1, 1.4, 1.5, 1.6, 1.7 CRD diesel engines.

Product code: MG04A2331

Engine timing tool kit for Vauxhall and Opel 1.6 CDTi diesel engines

Engine timing tool kit for Vauxhall and Opel 1.6 (from 2013 to 2018) CDTi EcoFlex engines. Engine codes: B16DTC, B16DTE, B16DTH, B16DTJ, B16DTL, B16DTN, B16DTR, B16DTU.

Product code: MG04A2370

Engine timing tool kit for Ford 2.2, 3.2 TDCi

Engine timing tool kit for Ford Ranger, Transit, Everest, Mazda BT 2.2, 3.2 TDCi.

Product code: MG04A2432D

Fish tape, 30m, green

30m steel cable fish tape in plastic green case. Flat metal tape, size 3x1mm. Insertion head size 40x10x3mm.

Product code: FT100-GREEN

Hydraulic jaw puller set 10t

Multi-function puller with adjustable two or three leg function. Allows bearings, gears, etc. to be easily removed with minimal effort by use of the hydraulic puller.

Product code: G00911

Hydraulic jaw puller set 20t

Multi-function puller with adjustable two or three leg function. Allows bearings, gears, etc. to be easily removed with minimal effort by use of the hydraulic puller.

Product code: G00912

Self-adjusting crimping tool, 0.25 - 10mm²

Self-adjusting crimping pliers for conductor end-sleeves. Wire ferrules are crimped onto a stranded wire in a four point crimp profile, protecting the fine strands from fraying, and then it is inserted into the terminal compartment.

Product code: G01772

Manual oil pump 1.5L

Manual suction device with a capacity of 1.5l. The device is designed to suck out or dispense oil and other operating fluids in hard-to-reach places.

Product code: G02124

Oil funnel with built in filter

Oil funnel with built in filter and flexible hose. Dia.: 140mm

Product code: G02150

Two jaw gear and bearing puller. Operating range: up to 150mm

Two jaw gear puller with adjustable clamping depth and width.

Product code: G02201

Trim, radio and moulding removal tool set

Professional tool kit for removing car upholstery, radios, navigation, dashboard, gasket, grilles, door covers, etc.

Product code: G02703

Bearing and gear puller with 3 jaws. Working range: up to 3" (75mm)

Bearing and gear puller with 3 jaws. Working range: up to 3" (75mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02230

Bearing and gear puller with 3 jaws. Working range: up to 6" (152mm)

Bearing and gear puller with 3 jaws. Working range: up to 6" (152mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02232

Brake fluid tester pen

Quick and easy method to accurately gauge the moisture content of all types of brake fluid.

Product code: G02731

Gear and bearing puller with 3 jaws. Max capacity: 14" (350mm)

Gear puller with 3 jaws 14" (350mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02247

Vacuum gauge and fuel pump pressure tester set with adapters

Measures vacuum up to 70cmHg and pressure up to 0.7bar. Fittings included for compatibility with most cars.

Product code: G02508

Inner tie rod remover and installer tool. For rod diameters: 35-41mm

Inner tie rod remover and installer tool. For rod diameters: 35-41mm. Length: 400mm.

Product code: G02548

Chain type oil filter wrench

Chain type oil filter wrench. Widely used for pipeline construction and oil filter removal.

Product code: G02555

Overhead valve spring compressor for OHV, OHC and CVH engines

Overhead valve spring compressor. Suitable for use on a wide range of OHV, OHC and CVH engines. Not suitable for use on engines with deep seated valves.

Product code: G02574

Ball joint seperator for pin diameters up to 19mm

Professional ball joint pin puller. It is made of durable, high-quality tool steel. It is adapted to work with pins with a diameter of not more than 19mm.

Product code: G02587

Piston ring compressor tool set

Pliers are used to remove and install piston rings without the risk of damaging the components. Three bladed discs and a tool for cleaning the piston grooves from accumulated carbon deposits. The piston ring tensioning band helps to fit the piston into the cylinder.

Product code: G02623

Spark plug and lambda probe thread repair kit

Spark plug and lambda probe thread repair kit is suitable for deaning corrosion and carbon build-up from spark plug / sensor threads.

Product code: MG04A6020

18pcs socket set for oil drain plugs

Specialized socket set for unscrewing drain plugs in oil pans. The set includes 17 sockets with 3/8" drives.

Product code: G02711

Clutch aligning tool with 3 sleeves

A high-quality universal tool for locking the clutch disc, ideal for manual alignment (centering) and applying the clutch disc to the pressure plate in cars and vans.

Product code: G02766

Alternator key with 6 point 17mm outter drive. Length 30mm

Bosch alternator clutch wrench. A specialist wrench for assembly and disassembly of the pulley clutch of Bosch alternators.

Product code: G02782

Transmission oil dipstick for Mercedes-Benz

Transmission oil dipstick for Mercedes-Benz. Lenght: 1220mm

Product code: G03260

Spark plug thread repair kit, 14mm

Spark plug thread repair kit is suitable for damaged spark plug threads, cleans and rethreads spark plug ports. A spark plug thread repair kit is used to repair damaged or stripped threads in the cylinder head.

Product code: MG04A6019

Pilot bearing puller. For bearing with inner diameters: 12-38mm

Suitable for removing tight fitted sleeve type bearings and bushings with inner ring diameters of 12 to 38mm.

Product code: G30301

Drum brake pliers

Drum brake pliers. For removing and installing return springs on drum brakes.

Product code: JBM52625

Motorcycle front axle hex socket, 17, 19, 22, 24mm

3/8" Motorcycle hex axle socket is designed for easy installation, removal, or adjustment of front wheel axles on sport and dirt bikes with hexagonal axle holes.

Product code: G02685

Piston ring compressor 3", 53-175mm

3" piston ring compressor. Ø 53/175mm

Product code: JBM52696

Universal belt tensioner wrench set

Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm

Product code: JBM52832

SAC clutch adjusting tool kit

Clutch deformations are avoided using the pretensioner. Using the reset tool, we will bring the reset ring of the pressure plate to the new position when mounting a new clutch valve.

Product code: JBM53001

Duplex clutch repair kit for VAG DSG transmissions

Special tools for repair work on DSG transmissions for assembling and disassembling the clutch housing.

Product code: JBM53057

Mini wire cutter

The micro wire cutter can be used to cut copper wire, aluminum wire, zip tie, plastic burrs, jewelry craft, soft copper wire, soft iron wire, etc, not for steel wires. Tip opening: 13mm.

Product code: JBM53411

Universal cooling system pressure test kit, 5pcs

This tool has been designed to check for leaks in the car cooling system. The four universal cone adapters fit a wide range of vehicles and cap sizes. (17-24mm, 28-31.5mm, 37-39.5mm, 47-48.5mm)

Product code: JBM54139

Piston ring compressor 6"x90 to 175mm

Piston ring compressor 6"x90 to 175mm. Allows the assembly of pistons without damaging the piston rings.

Product code: G02622

Injector puller set, Bosch, Delphi, Denso, Toyota, Siemens, 10t

Injector puller set to be used with hydraulic hand pumps (not included). For M17 Bosch, M14 Delphi, M16 Toyota Adaptor, M20 Denso, M25 x 1.0 / M27 Siemens.

Product code: JBM54245

Injector seat milling and cleaning kit

The kit is suitable for renovating a diesel injector housing, cleaning an injector housing and bore, as well as a glow plug bore using milling cutters.

Product code: MG04A3065D

Leak tester for cylinder head gasket

CO2 Combustion leak detect. This tool is designed to check for the leaks between combustion and cooling system of water-cooled engines. With 3 adapters.

Product code: MG04A4052

Battery terminal cleaner

Quality stainless steel brush. Its use is quick, easy and has many comforts. Used to remove acid residues and corrosion traces that can prevent proper flow

Product code: MG04D2029

Axial joint puller 35-45mm

Suitable for quick and easy removal/installation of the steering knuckle. Clamping size 35-45mm, length 400mm, hexagon end 27mm (1/2"DR)

Product code: MG50045

Axial joint puller 28-35mm

Suitable for quick and easy removal/installation of the steering knuckle. Clamping size 28-35mm, length 400mm, hexagon end 27mm (1/2"DR)

Product code: MG50045A

Brake rewind tool set, 21pcs

Right- and left-hand helix bolts, suitable for almost every car type, like Citroen, Audi, Fiat, Ford, BMW, Mercedes-Benz, Toyota, Volvo, VW, Renault, Opel

Product code: MG50061

Wheel bearing removal/installation tool set 50-88mm

Diminishes the possibility of wheel bearing damage during removal and installation. Sizes (d) 50, 55, 60, 64, 67, 70, 72, 74, 75, 78, 82, 84, 88mm.

Product code: MG50075

Valve stem seal pliers set

Valve stem seal pliers, deep seal driving sockets diameter 10.8-14.8mm, seal driving adapters 5, 5.5, 6, 6.6, 7, 8mm and 3/8"

Product code: MG50105

Petrol engine compression tester kit

A Petrol engine compression tester kit is a tool that can be used to check the tightness and performance of engine pistons in the combustion chamber.

Product code: MG50192

Petrol fuel pump pressure test kit, 0-7bar, 1/4", 3/8" adapters

For petrol fuel pump pressure testing. For injection systems (except the CIS-Jetronic, Bosch and the GM throttle valve systems).Measuring range 0-7bar(0-100psi)

Product code: MG50195

Timing tool set for BMW, N47, N47S

BMW, N47, N47S, camshaft, flywheel locking tools, crankshaft pulley holding tool, injection pump locking tool, for 4-cylinder straight 2.0 TD engines

Product code: MG50344

Front wheel drive kit, 55.5-91mm, axle 380mm

Sizes(d) 55.5, 59, 62, 65, 66, 71.5, 73, 78, 84, 86, 91mm, axle 380mm

Product code: MG50405

Wheel Bearing tool VW

Bearing installation and removal tool for 85mm bearings. Application Volkswagen Touareg, Transporter, Multivan & T5

Product code: MG50432A

Pneumatic brake fluid exchanger, 0.75l

For draining and filling in oil, bleeding, suitable for cars, motorcycles. Accurate and quick operation.

Product code: MG50445

Common Rail injection pump pressure tester

For Bosch, Denso, Delphi and Siemens Common Rail injection pump pressure testing

Product code: MG50507

Cooling system pressure tester

For coolant leakage testing, cleaning, pressure testing (measuring range 0-2.5 bar), 17 caps, radiator cap adapter. Suitable for coolant change and refilling.

Product code: MG50508

Oxygen sensor socket set

This kit allows quick and damage-free replacement of lambda sensors, which are an important part of exhaust gas treatment systems. Different sizes and types of keys ensure that all lambda probe types are suitable, maximizing flexibility and applicability.

Product code: MG50627

KM10 socket wrench for unscrewing the wheel hub nut of the Mercedes G class

The socket wrench is specifically designed for the precise and safe removal and installation of the wheel hub nuts of Mercedes G class cars. With its dimensions and design, the socket wrench ensures an optimal fit with the wheel hub nuts, allowing them to be handled quickly, easily and without damage.

Product code: W0504

Water pump locking tool for Opel 2.2 16V

This tool is designed to immobilize the water pump pulley, allowing for secure and efficient removal or installation of the water pump and associated components. To properly replace or service the water pump in an Opel 2.2 16V engine, a water pump locking tool is often necessary.

Product code: W0350

Terminal extractor with 6 connectors

Terminals can be easily removed with the help of this tool. With 6 pull-outs of different sizes, it is suitable for most electronic devices.

Product code: JBM54112

Timing lock and tools for high pressure fuel pump Renault 2.0 D Blue dCi from 2020

This tool is designed to ensure precise timing and secure removal of the high-pressure fuel pump and to fit the unique specifications of the Renault 2.0 D Blue dCi engine, guaranteeing compatibility and optimal performance.

Product code: C01/0261

Short screw for bushing pullers M12, 150mm

This M12 short screw for bushing pullers is 150mm long and perfect for silent pullers. Get the job done quickly and efficiently with this durable tool.

Product code: W0530

Sleeve puller, rear beams, BMW E39 sedan

The sleeve puller is used to remove and install the rear axle bushing.

Product code: W0096

Puller for suspension arm sleeves – front, BMW E 39 M5

This suspension arm sleeves puller is specially designed for BMW E39 535i ;540i M5 ; BMW 7 E38 models. The tool helps technicians to remove the suspension bushing easily and safely without damaging surrounding parts or the bushing.

Product code: W0086

Socket wrench for KM1 lock nuts

Outer diameter: 26mm, inner diameter: 18.5mm, tooth: 2.3mm, length: 45mm. Helps to prevent damage to the nuts.

Product code: W0716

Adapter for mounting pin BMW 3 and Z 3 (BMW E36) BMW 31126758510

The Adapter for Mounting Pin BMW 3 and Z3 is a specialized tool designed to facilitate the precise installation or pressing of pins in BMW 3 Series and Z3 models. This adapter is specifically designed to work with a hydraulic or manual press, ensuring a secure and accurate pin installation process.

Product code: W0707

Radiator and Heating Core Cleaning Machine

Radiator and Heating Core Cleaning Machine is a tool used to clean the cooling systems of vehicles. Its main purpose is the effective cleaning of radiators and heating cores, which can accumulate deposits and dirt over time, thus reducing the cooling efficiency.

Product code: RDT3000

Fuel System Cleaning Machine (Injection System)

Fuel System Cleaning Machine (Injection System) is designed as a long-lasting, reliable, versatile and effective machine. It is mechanically and electronically designed to test and clean both diesel and gasoline engines, including TDI, HDI and COMMON RAIL engines. It has two separate tanks for diesel and benzin.

Product code: ETM2000

Brake bleeder tool, 1L

This compact and easy-to-use device enables a quick and efficient venting process. Up to 90-120psi

Product code: MG04B4091

Draing plug sockets set, 20pcs

Draing plug sockets set can be used to remove or fix oil drain plugs in cars.

Product code: MG04A5082

Socket/Wrench For bearing nuts KMT 19 (6 teeth)

It is specifically made to handle the demanding requirements of low loader trailers. The socket/wrench is hardened to ensure durability and withstand the high torque needed to tighten or loosen bearing nuts. It is made of high quality material for strength and reliability.

Product code: W0644

Dial indicator - metric version

The dial indicator is an element of industrial automation. It is used to check the geometrical shape of a given element and the proper preparation of the element for work on a given machine. It is mostly used in metalworking and the automotive industry but we can use in construction, research and development where high precision measurements are required.

Product code: CKB03578

Heavy-duty oil filter belt strap wrench, 9"

An oil filter strip wrench is a special tool used to remove oil filters. By placing the band wrench on the filter and turning the wrench, it grips the filter tightly, making it easy and safe to remove. Using an oil filter wrench is much more efficient than conventional oil filter pliers, because the wrench can exert much more force and does not slip on the surface of the filter.

Product code: CKB08200

Pneumatic CV joint boot install tool

This pneumatic CV joint boot install tool makes installation fast and easy. It prevents boot damage and ensures a tight fit. Simply adjust the air control switch and place over the CV joint. Lubricate before use. Working pressure: 5-9bar. Perfect for auto mechanics!

Product code: MG04B1085

SAC clutch disassembly and assembly tool set

SAC clutch disassembly and assembly tool set for Audi, VW, Ford, Mercedes, BMW, Alfa Romeo, Fiat, Lancia

Product code: MG04B1083D

Shock absorber spring compression, heavy duty, 2,3T

Macpherson spring compression tool. Adjustable 100-265mm. Fits most car models. Drive: 24mm allen.

Product code: MG04B2116

Brake caliper sockets for Audi Q5, A4, A5

Designed to loosen or tighten brake caliper bolts in Audi vehicles.

Product code: W0552

Glow plug reamer, 9mm

Tool for reaming broken glow plugs shafts. Diameter: 9mm. Length: 11cm.

Product code: W0633

DSG fluid change adapter for VAG

DSG fluid change adapter for VAG

Product code: C01/0247

Crankshaft locks for BMW, Mini 1.6, 2.0 engines

Crankshaft lock for BMW and Mini 1.6 and 2.0 Diesel Common Rail N47 engines from 2013 and on.

Product code: C01/0245

Timing tool set for Mercedes Benz M177 and M178 V8 4.0L engines

Timing tool set for Mercedes Benz M177 and M178 BiTurbo V8 4.0L engines. OEM: 177589014000, 177589001500, 177589014000, 27158900100, 177589000900.

Product code: C01/0236

Key / nut for the bearing nut KM 11

This tool is provide a secure fit and facilitate the proper tightening or loosening of the locknut during bearing installation or removal processes. The key/nut is manufactured using hardened, high-grade materials to ensure durability and strength, making it capable of withstanding the forces involved in working with bearings and locknuts.

Product code: W0509

Camshaft timing chain tensioner for Audi, VW, Seat

Camshaft timing chain tensioner. For Audi and VW 1.8L Turbo I4, 2.7L Bi-Turbo V6, 2.8L V6 and 4.2L V8 engines.

Product code: CKB10035

Bearing puller set, 14pcs

Designed for pulling bearing off shaft and separating bearing housings.

Product code: DK-230589

Ball joint socket wrench for Renault Master III, Opel Movano B

Ball joint socket wrench for Renault Master III, Opel Movano B.

Product code: W0469

Universal silent and bearing puller kit, 24pcs

This professional tool set is designed for the removal and installation of bushings, silent bearings, hydraulic bearings and seals, etc.

Product code: DK-230581

Sleeve puller for Opel rear beams

Rear bushing puller for Zafira B, Astra H, Meriva. For the assembly and disassembly of sleeves in cars.

Product code: W0372

Internal bearing puller ⌀35mm

Internal bearing puller is a special tool designed to remove gear bearings with an inner diameter of 35 mm.

Product code: W0291

Puller sleeve rear beam (large) for BMW X5 E53, M57 etc.

Crafted to meet the exacting standards associated with BMW vehicles, this tool ensures precision and ease during maintenance or repair tasks.

Product code: W0251

Control arm bushing puller lower front Opel Astra G, H, Zafira, Vectra B

The control arm bushing puller for the lower front of Opel Astra G, Astra H, Zafira, and Vectra B is a specialized tool used to remove the control arm bushings in the front suspension of these vehicles.

Product code: W0190

Sleeve puller for control arm rear axles for Fiat, Opel, Saab

Sleeve puller for control arm rear axles for Fiat, Opel, Saab

Product code: W0142

Universal wiper arm puller

Universal wiper arm puller. Two paws type.

Product code: W0123

Puller to the wiper arms - universal 50x40

Puller to the wiper arms - universal 50x40 designed to provide efficient and reliable removal of wiper arms from a wide range of vehicles, including newer car models. This puller has been developed based on the design by Machanikow and has undergone extensive testing on various new cars, ensuring its effectiveness and performance.

Product code: W0119

Set of adapters for dismantling and mounting of lower bolts, IVECO

The adapter kit is precisely engineered and durable, and allows reliable and efficient removal and installation of lower suspension bolts. Designed to IVECO vehicle specifications to fit perfectly with the lower suspension bolts and allow smooth and safe operations.

Product code: W0116

Puller screw, M12, 250mm

Screw for bushing and sleeve pullers, M12, 250mm.

Product code: W0101

Air conditioner line tool set

The Air conditioner line tool set can be used to assemble the lines used in the installation or maintenance of the air conditioner.

Product code: MG50129

Tool for hub removal (set of 15 screws)

Tool for hub removal – cars of A, B, C class and others. Set of 15 screws.

Product code: W0072

Suspension bushing puller, Opel Vectra B, BMW E36

Ideal for the removal and refitting of the suspension bushes without removing the trailing arm assembly from the vehicle.

Product code: W0001

O2 sensor and injector nozzle socket set, 7pcs

O2 sensor and injector nozzle socket set, 1/2": 29X90mm, 27X82mm (12-point), 22X50mm, 3/8": 7/8"X90mm, 1-1/16"X74mm, 7/8"X80mm, 22X31mm

Product code: MG50323

O2 sensor and injector nozzle socket set, 4pcs

O2 sensor and injector nozzle socket set, 8x78mm (12-point): Alfa Romeo, Fiat, Rover, Opel, 27X82mm (12-point), 22x80mm (12lapos), 22x108mm (6-point)

Product code: MG50322

Vacuum/pressure test kit

Vacuum range 0-1bar, pressure 0-3bar, tank (2x120ml), hose 600mm, couplers, adapters

Product code: MG50411

Alternator Freewheel Removal Set Removal Set, 13pcs

Alternator Freewheel Removal Set, 13pcs which is specifically designed to remove the alternator freewheel pulley.

Product code: MG50352

200CC Extraction & Fill Pump

200CC Extraction & Fill Pump is ideal for removing and filling brake fluid, antifreeze, transmission fluid, power steering fluid and other fluids.

Product code: MG01Z5830

Oil suction gun. Capacity: 1000ml

Oil suction gun is suitable for removing or replacing oil in engines and gearboxes.

Product code: G01151

1/2" impact XZN bit socket set for VW brake calipers

1/2" impact XZN bit socket set for VW Transporter, LT M14 (length 43, 78mm), Golf M18 (length 43, 78mm), Sharan M16 (length 43, 78mm)

Product code: MG50385

Pneumatic ATF and oil filling pump set for gearboxes, 15pcs

Pneumatic ATF and oil filling pump set for gearboxes, 15pcs. For Ford, BMW, Honda, Nissan, VW, Audi, Skoda, Porsche, Mini Cooper, Mercedes Benz, Honda, Hyundai, Kia, Nissan, Infinity, Volvo, Toyota, Lexus.

Product code: G02117

Two jaw gear and bearing puller. Operating range: up to 200mm

Two jaw gear and bearing puller with adjustable clamping depth and width. For both internal and external bearings.

Product code: G02202

Bearing and gear puller with 3 jaws. Working range: 12" (305mm)

Bearing and gear puller with 3 jaws. Working range: 12" (305mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02246

Offset oxygen sensor socket. Diameter: 22mm, Drive: 3/8" square

Common 6 point, 7/8 in (22mm) socket, suitable for most oxygen sensors.

Product code: G02686

Universal belt tensioner wrench set

Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm

Product code: MG50635B

Ball joint removal set, 5pcs

Designed for easy removal of most popular types of pitman arms, tie rods and ball joints. Operation range: 17, 19, 21, 23, 27mm

Product code: DK-230506

Oil drain pan, 10l

Oil drip tray is constructed of high quality, recyclable polythene plastic that is resistant to corrosion so your oil pan will remain durable for carrying oil, gasoline, and antifreeze. 385mm x 125mm

Product code: DK-230533-10

Electric terminal release tool set, 23pcs

Perfectly removes terminals from coolant sensors, wiring harness connectors and terminal blocks. Fit for BMW, Mercedes, Opel, VW, Jaguar, Porsche, Saab, Seat, Skoda, Ford, Renault, Citroen, Fiat, Honda, Mazda, Mitsubishi, and Toyota vehicles.

Product code: DK-230588

Timing lock set for Ford, Volvo 1.6 GTDI, Ecoboost 1.8, 2.0 Duratec engines

The tool set is intended for adjusting the camshaft and crankshaft in Volvo and Ford 1.6, 1.8, 2.0 cars.

Product code: C01/0221

Timing tool set for Jaguar and Land Rover 2.0 GTDi

Tool set to replace the timing in Jaguar XE, XF, XJ and Land Rover Discovery Sport, Freelander, Range Rover, Evoque 2.0 GTDi. OEM codes: 303748, 3031565, 3031521, 3031595, 3031594.

Product code: C01/0234

Timing tool set for BMW N51, N52, N52K, N53, N54, N55 2.5 and 3.0 engines

Timing tool set for BMW N51, N52, N52K, N53, N54, N55 2.5 and 3.0 engines. OEM: 11.4.280, 11.4.281, 11.4.282, 11.4.283, 11.4.285, 11.4.290, 11.0.300, 11.8.520/521, 11.9.340.

Product code: C01/0235

Timing tool set for Mercedes-Benz 1.6, 2.0 M133, M270 and M274

Timing tool set for Mercedes-Benz 1.6, 2.0 M133, M270 and M274. Engine codes: 270.910 A, 274.910 B, 133.980 A, 270.920 A, 274.920 B.

Product code: C01/0246

Timing tool set for Ford 1.0 EcoBoost, 2012 and on

Timing tool set for Ford 1.0 EcoBoost, 2012 and on. OEM: 303-1661-1, 303-1661-2, 303-1661-3, 310-018, 303-1602, 303-1604, 303-1603, 303-732, 303-1054, 303-1661-1, 303-1661-2, 303-1661-3, 310-018,  303-1602, 303-1604, 303-1603, 303-732, 303-1054, 303-1605/1, 303-1605/2, 303-1606/1, 303-1606/2.

Product code: C01/0248

Injector removal set for Ford EcoBlue 2.0 diesel

Injector removal set for Ford Edge, Focus, Galaxy, Kuga, Mondeo, Ranger, S-Max, Tourneo Custom, Transit, Transit Custom EcoBlue 2.0 diesel. OEM: 303-1706.

Product code: C04/0244

Piston ring compressor, 4"x90 - 175mm

Piston ring compressor, 4"x90 - 175mm. Allows the assembly of pistons without damaging the piston rings.

Product code: G02621

Oil pressure tester kit, hose with quick couplers, 10 adapters

For oil pump, pressure tester, oil pressure switch testing. Hose with quick couplers, with 10 adapters

Product code: JBM52754

Transmission oil filling system (ATF)

Transmission oil filling system. Capacity: 7.5l, Outlet: 80cc cycle, Viscosity range up to SAE140. Includes 15 accessories for Ford 1/8 - 27, universal BMW, Honda, Nissan, VW, Audi, Skoda, Porsche, Mini Cooper, Mercedes, Hyundai. Universal and flexible 300mm hose.

Product code: JBM52797

Rear trailing arm bushing removal tool for Ford and Volvo

Remove and install rear trailing arm bushings on Ford and Volvo vehicles without disconnecting brake lines or removing bolts. Fits multiple models. OEM code 205-1017.

Product code: MG04B2126

Ratcheting brake caliper press

Effortlessly maintain your brake calipers with our ratcheting brake caliper press. Its 360° rotation and centrally located ratchet evenly spread force to prevent misalignment. Works on twin and quad piston fixed calipers, as well as single calipers. Comfortable ergonomic handle included.

Product code: MG04B4069

Petrol & Diesel Engine Compression and Leakage Test Kit

Petrol & diesel engine compression and leakage test kit, with glow plug-, injector-, and spark plug adaptors

Product code: MG04A1066D

Mercedes benz timing chain riveting tool set

Mercedes benz timing chain riveting tool set. For Mercedes Benz, Chrysler, Jeep 1.7 - 4.0 diesel engines.

Product code: MG04A2298

Common rail diesel high pressure tester kit

Our Common Rail Diesel High Pressure Tester Kit is an essential tool for accurately measuring high pressure fuel circuits in diesel common rail systems. With a safety release of 1500bar, it includes a 2000bar dial gauge, high pressure flexible hoses, adapters, screws, and holding bottle. Perfect for engine pressure tests, pump pressure tests, regulator tests, and injector leakage tests.

Product code: MG04A3100D

Clutch centering mandrel, 11pcs

11pcs clutch centering mandrel with accessories, Ø20-26.6mm, Ø15-19mm, Ø23-36mm, Accessories diameters: 12, 14, 15, 16, 17, 18, 19, 20mm

Product code: JBM53410

ATF fluid extractor and dispenser, pneumatic, 8L

Our pneumatic ATF fluid extractor and dispenser with a capacity of 8L is a must-have for any mechanic. Prevent spills and control fluid flow easily with the volume guide. Equipped with safety release and various adapters for different transmissions.

Product code: MG04B1091

Hex Socket Adapter Kit

Hex socket wrench adapters for 1/4, 3/8, 1/2 sockets. It is made of 40Cr steel, the additional surface is oxidized. The perfect addition to any toolbox.

Product code: CKB01164

Universal Tail Pipe Cutter Exhaust Pipe Cutting Wrench

Wrench designed for cutting steel exhaust pipes, but can also be used to cut copper steel pipes, PVC, etc. The Universal Exhaust Pipe Cutter is the best tool for exhaust system repair and maintenance. Easy to use and versatile to adapt to any exhaust pipe.

Product code: CKB07414

Professional dial gauge with magnetic base holder

Measuring the brake system is easier and more accurate than ever with the professional indicator watch magnetic base holder. The magnetic base ensures the fit, and the contact point detects even the smallest deviations. The dial pointer and the polished chrome control lever help with precise adjustment. The magnetic base can be easily removed with the on/off lever. Quickly check brake system play with this tool.

Product code: CKB03577

Oil Filter Wrench - Nylon Strap

An oil filter wrench is a useful tool for removing and replacing the oil filter.

Product code: CKB01237

Oil drain pan, 15l

Oil drip tray is constructed of high quality, recyclable polythene plastic that is resistant to corrosion so your oil pan will remain durable for carrying oil, gasoline, and antifreeze. 450mm x 145mm

Product code: DK-230533-15

Axle nut socket set, 9pcs

Axle nut socket set, 9pcs is a special set of tools required for tightening and loosening vehicle axle nuts. These types of nuts are usually large and overtightened and require special wrenches to fit their size and shape.

Product code: MG04B1015