180° tube bender 1/4" (6mm), 5/16" (8mm) and 3/8" (10mm)
Product code: JBM52905
Brand: JBM
- Budapest: 2
- Debrecen: 4
Product description
Description
It makes perfect bends in aluminum, copper and steel tubing. The lever action allows for easy and precise bending, without collapsing the tubing. Marked degrees gauge for accurate angles 0-180°. Solid cast steel construction with machined and painted surfaces. For tube diameters: 6, 8, 10 mm.
Product packing
Pack number | Dimensions | Weight |
---|---|---|
1 | 34 x 12.5 x 6 cm | 0.45 kg |
Delivery fee
Delivery method | Gross price |
---|---|
Pickup in Nagytarcsa | 0,00 € |
Pickup in Debrecen | 0,00 € |
DHL Worldwide Express | 61,67 € |
More products in this category
Brake rewind tool set, 21pcs
This 21-piece tool set is a powerful tool to properly rotate and push the piston back into the caliper during brake maintenance or replacement tasks. The set is suitable for many vehicles, making it a versatile addition to any workshop.
Product code: MG50061
Adjustable Brake Wind-Back Adaptor Set
This Adjustable Brake Wind-Back Adaptor Set is an essential toolkit for automotive professionals involved in brake maintenance and repair. The set features two adjustable brake caliper rewind adaptors, tailored to cater to a broad spectrum of vehicles.
Product code: MG94017
Universal brake caliper wind back tool kit, 16pcs
Pneumatic rewind tool for disc brake pistons with adapters. Brand new practical and convenient kit for replacing front and rear disc brake pads.
Product code: DK-230540
Ratcheting brake caliper press
Effortlessly maintain your brake calipers with our ratcheting brake caliper press. Its 360° rotation and centrally located ratchet evenly spread force to prevent misalignment. Works on twin and quad piston fixed calipers, as well as single calipers. Comfortable ergonomic handle included.
Product code: MG04B4069
Brake cylinder wind-back tool
Brake cylinder wind-back tool, for Audi, Ford, Honda, Jaguar, Mazda, Mitsubishi, Nissan, Rover, Saab, Subaru, Toyota, VW
Product code: MG50407
Break piston removal tool
Essential tool for retracting the brake piston to allow insertion of new brake pads.
Product code: CKB04066
Universal tool for front brake caliper push back
Universal tool for front brake caliper push back. Drive: hex, 17mm. Wheel diameter: 49mm.
Product code: W0003
Drum brake pliers
Drum brake pliers. For removing and installing return springs on drum brakes.
Product code: JBM52625
Brake and fuel hose clamp set, 2pcs
The 2-Piece Brake and Fuel Hose Clamp Set is an essential tool for any automotive repair task. Featuring a robust alloy body and a strong steel clamp arm, these clamps are specially designed for handling brake and fuel lines, as well as vacuum hoses.
Product code: MG92501
8 PCS professional brake repairing tool
Contains the most popular brake tools used for servicing drum brakes on the most vehicles.
Product code: MG04B4040
Universal drum and disc brake tool set, 15pcs
This 15-piece universal drum and disc brake tool set is a comprehensive kit designed for the replacement and cleaning of front and rear brakes on various car models. This set includes a wide range of tools to handle different aspects of brake maintenance and repair.
Product code: MG97012
Brake piston driver
Device for screwing the brake pistons.
Product code: CKB04078
Hose clamp set, 4pcs
Hose clamp set, 4pcs are light and compact steel alloy construction for ease of use where space is limited.
Product code: MG04B4018
Wrench for rim unscrewing, ABS Renault Maskot, Master
Wrench for rim unscrewing, ABS Renault Maskot, Master
Product code: W0095
Hand held vacuum pump
A multifunction vacuum diagnostic tool with robust compact design.
Product code: MG04B4028
Hand held vacuum pump
Accepts many kinds of adapters to fit most types of vehicles. The body has a switch to control two kinds of pressure conditions. Pressure ranges: positive pressure 0-60psi (1-4inhg) and negative pressure 0-30psi (0 to -1inhg).
Product code: CHS-A998A
Vacuum/pressure test kit
The Vacuum/Pressure Test Kit is a comprehensive diagnostic tool designed for a wide range of automotive testing and maintenance tasks. It is engineered to measure both vacuum and pressure levels within an automotive system.
Product code: MG50411
Brake pressure test kit
Brake pressure test kit is a comprehensive kit for accurate brake pressure measurement, suitable for testing front and rear brakes.
Product code: MG04B4055
Vacuum and pressure gauge
Measuring range (pressure) 0.1bar, 14, 18mm coupling adapter
Product code: MG50190
Brake system bleeding set
Pneumatic brake system bleeding set.
Product code: G02732
Brake fluid oil exchanger
Remove, and replace fluid from most types and models of vehicle brake systems. Also removes trapped air.
Product code: GS-432
Brake Fluid Exchanging and Airing Machine
Brake Fluid Exchanging and Airing Machine is a device that is easy for one person to use, facilitates and speeds up the replacement of brake fluid, eliminates dirt and moisture in the brake system, and ensures adequate air removal for effective braking. It has the right cover kit for every vehicle.
Product code: FHD1000
Brake fluid tester pen
Quick and easy method to accurately gauge the moisture content of all types of brake fluid.
Product code: G02731
180° tube bender 1/4" (6mm), 5/16" (8mm) and 3/8" (10mm)
Tube bender. Diameter range: 1/4" (6mm), 5/16" (8mm) and 3/8" (10mm). For aluminum, copper and steel tubes. 0-180° angles.
Product code: JBM52905
10pcs double pipe flaring tool set
The pipe flaring is particularly important for the installation of brake pipes used in the brake system, where precise and safe fitting is essential. It can also be a useful tool for air conditioner pipes.
Product code: MG04B4092A
10pcs double pipe flaring tool set
Suitable for flaring different pipes (Diameters: 5, 6, 8, 10, 12, 14, 16mm)
Product code: MG04B4092M
Tube flaring set 3-19mm
Tube flaring set for tubes with diameters: 3, 5, 6, 8, 10, 12, 15, 16, 18, 19mm.
Product code: G02720
Hand held brake pipe flaring tool
A manual brake pipe crimper is a tool used to seal brake lines by making SAE-type ends. The press allows the production of both single taper (OP1) and double taper (OP2) ends. Suitable for copper and copper-nickel joints. The press is designed for 3/16" or 4.75 mm diameter thin-walled steel pipes.
Product code: CKBB4128A
Tube double flaring set, 9pcs
Tube double flaring set, 9pcs for brake line tubings.
Product code: K00180
Brake Disc Lathe Machine (Two-Functions)
Brake Disc Lathe Machine (Two-Functions) is specialized model to offer dual functionality. It has the feature of grinding both on the vehicle and outside with additional apparatuses to the existing disc lathe machine.
Product code: FDT7000
Onboard brake disc lathe machine
Using an on-board brake disc lathe saves time and reduces risk of misalignment by allowing precise resurfacing of brake discs without needing to remove them from the car.