Specialized tool for removal of the steering gear nut for Jeep Grand Cherokee models

Specialized Straight Crown Wrench for Steering Gear Nut Removal – Jeep Grand Cherokee (1992-1998)

A specialized straight crown wrench designed for hydraulic steering rack repair. Allows safe removal and installation of the gearbox nut in Jeep Grand Cherokee (1992-1998) models without damage.

Product code: MS00087

Steering rack side nut socket for BMW, Nissan, Renault models

Specialized tool for precise removal, installation, and adjustment of the side preload nut in electric power steering racks, ensuring part integrity and durability.

Product code: MS00079

Specialized tool for removal of the steering gear nut for Mitsubishi L200, Pajero models

A specialized tool for hydraulic steering rack repair, designed for safe disassembly of the gearbox nut. Prevents damage while loosening or tightening.

Product code: MS00085

Universal power steering pump hub puller

Specialized universal tool for safely removing power steering pump pulleys while preserving the integrity of both the pulley and the pump.

Product code: MS00080

Teflon Ring Installer tool for TRW Steering rack

Specialized tool for securing Teflon rings on the steering rack distributor after installation, ensuring a proper seal and preventing damage to the rings.

Product code: MS00076

MAN front axle cap, 6 teeth, 92.50mm

Designed specifically for MAN trucks, ensuring seamless integration and optimal performance. Meticulously crafted with a 6-teeth configuration, providing superior fit.

Product code: W0732

Wrench for dismantling Mercedes Benz oil filter 84mm; Angle 14

This special wrench for disassembling the oil filter is specially designed for certain models of Mercedes-Benz and Chrysler. The 84mm x 14kt size and 1/2" drive ensure it fits the filter perfectly, making it easy to remove or replace the filter.

Product code: W0737

Steering rack side nut socket for BMW, Ford, Iveco, Mercedes, Polestar, Volvo

Precision tool for removing, installing, and adjusting the side preload nut in electric power steering racks, ensuring part integrity for future use.

Product code: MS00084

Nut cap for Goldhofer THP/SL4 trailer; 6 teeth, teeth inside

The Nut Cap with 6 internal teeth and a tooth distance of 107 mm is a specialized component used in Goldhofer THP/SL4 semi-trailers to secure and maintain critical parts of the trailer's assembly.

Product code: W0726

O2 sensor and injector nozzle socket set, 4pcs

O2 sensor and injector nozzle socket set, 8x78mm (12-point): Alfa Romeo, Fiat, Rover, Opel, 27X82mm (12-point), 22x80mm (12lapos), 22x108mm (6-point)

Product code: MG50322

Oil filter wrench 80mm 14 angles. Kia/Hyundai 1.6 CRDI

This precision-engineered 80mm 14-angle oil filter wrench is an essential tool for efficient oil filter replacement on select Kia and Hyundai models. The wrench is a perfect fit for 1.6L D4FE (U3) diesel engine codes, allowing for easy filter removal and installation. Its compatibility extends to newer models of both brands.

Product code: W0738

Teflon ring installation tool for ZF steering rack

A specialized tool for securing Teflon rings on the steering rack pinion after installation, ensuring a perfect seal and preventing damage to the resilient material.

Product code: MS00075

2“ PISTON RING COMPRESSOR

A piston ring compressor is essential when it comes to engine repair. It can be used to connect the piston with rings, and also helps to secure the piston to the engine body. Allows pistons to be assembled without damaging the piston rings.

Product code: MG04A1049

Front sled bushing puller Renault Laguna II, Trafic II

This is a tool used to remove the bushings in the front suspension of Renault Laguna II and Renault Trafic II cars.

Product code: W0368

Rubber hose for A/C chargers, red, 6m

Flexible red rubber hose for A/C chargers with 1/4 SAE couplings, 6 meters long.

Product code: 0TG074CR056

Timing tool set BMW N62, N73 engines

Timing tool set BMW N62 engines; N62TU; N73 / PETROL V8 3.6/4.0/4.4/4.8 N62/N62TU + 6.0 V12 N73 timing chain

Product code: W0252

Valve Lapping Tool Attachment, 6 parts

Using a Valve Lapping Tool Attachment to grind the valves.

Product code: MG04A2269A

Steering Rack Bearing Bushing Nut Socket for Chevrolet Aveo

Specialized nut socket for the installation and removal of the steering rack bearing bushing. Designed for hydraulic steering rack repairs, ensuring safe disassembly and reassembly of the support sleeve.

Product code: MS00077

Diesel compression tester kit, with injector, glow plug adapters, 14pcs

Comprehensive range of glow plug adaptors and dummy injectors for checking the compression on diesel engines.

Product code: MG50181

Alternator bit socket T50, 1/2" square drive

Wrench for clutch generators that allows you to unscrew the bolt that secures the pulley for easy removal of the V-belt.

Product code: MG9872012

Clutch Aligner Tool kit, 15-28mm

Set for 15-28mm clutch discs. Enables precise centering of the clutch on vehicles with or without disc guide bearings. A clutch centralizer is a tool used in car assembly to repair and maintain the clutch system. Allows easy installation of the clutch disc.

Product code: MG04B1096

Pneumatic injector and bearing puller set, 35pcs

Pneumatic injector puller set with air hammer, 35pcs is a specialized tool set designed for removing injectors from automotive engines using pneumatic power.

Product code: MG99091

Automotive electric terminal disassembly tool set, 18pcs

The 18-piece Automotive Electric Terminal Disassembly Tool Set is a comprehensive collection of universal tools designed for the efficient separation of most connector terminals and wire harnesses found in cars and electric vehicles.

Product code: MG95115

Timing tool set Volkswagen Touareg, Phaeton 5.0 V10 TDI

Timing tool set Volkswagen Touareg, Phaeton 5.0 V10 TDI

Product code: W0276

Teflon ring installation tool for SMI-KOYO steering rack

A specialized tool for shrinking Teflon sealing rings after installation on SMI-KOYO steering rack distributors, ensuring a secure and precise fit.

Product code: MS00074

Taillight nut wrench for Tesla

Tail light nut wrench for Tesla vehicles. Specifically designed for quick and easy removal and installation of taillight nuts in Tesla models.

Product code: MG99610

Glow/Spark Plug Socket Set, 6pcs, 3/8"

The tool set are specially designed to fit and securely grip the spark plugs or glow plugs during installation or removal.

Product code: MG50377

Valve stem seal pliers set

Valve stem seal pliers, deep seal driving sockets diameter 10.8-14.8mm, seal driving adapters 5, 5.5, 6, 6.6, 7, 8mm and 3/8"

Product code: MG50105

Piston ring service tool set, 9pcs

This 9-piece piston ring service tool set simplifies engine maintenance, featuring 3 piston compressors, a ring expander, groove cleaner, and a master kit. Fits diameters 53-175mm.

Product code: MG50608

Universal adjustable fuel tank lid remover

Universal adjustable fuel tank lid remover, which can be adjusted between 80mm-199mm, so it is a suitable choice for many types of cars.

Product code: MG04A3077

Ford DPS6 dual clutch oil seal remover and installer set

The Ford DPS6 dual clutch oil seal remover and installer set ensures precise and easy removal and installation of oil seals for Ford DPS6 transmissions. Made of durable materials, it prevents leaks and saves time.

Product code: MG92532

Fuel Filter Tool For Diesel

The Fuel Filter Tool for Diesel, a specialized tool designed to facilitate the process of changing the fuel filter insert in various diesel vehicles, including Chevrolet, Citroen, Fiat, Saab, Suzuki, Opel, and Vauxhall models. This tool is specifically engineered to prevent damage to the housing assembly during the fuel filter replacement procedure.

Product code: MG04A3088

Turbocharger tester kit, 9pcs

A 9-piece turbocharger tester kit designed to detect air leaks and cracks in intercooler tubes and pipes, featuring 8 conical adapters (35-80mm), a pressure gauge (0-70psi), and quick-connect regulating and discharge valves.

Product code: MG90150

Oil filter wrench set, cup type, 15pcs

The set includes 14 filter removal wrenches and a narrowing adapter. All wrenches have 3/8″ square drives. 65 - 100mm

Product code: DK-230525-15

Valve lapper set, 15mm, 20mm, 28mm, 34mm

Suitable for grinding most engine valves. It has four sizes of rubber suction cups.

Product code: MG50104

Wheel lock nut removal impact socket set, 9pcs

Easily remove locking wheel nuts with this 9-piece impact socket set. Durable and versatile, it fits 19-22mm sizes, perfect for common needs.

Product code: MG91321

Engine Block Stethoscope

It is indispensable for almost every workshop. It can be used to reveal hidden errors in the engine. Its use is simple and comfortable. During its operation it amplifies noises so their source can be easily determined

Product code: MG04D2021

O2 sensor and injector nozzle socket set, 7pcs

O2 sensor and injector nozzle socket set, 1/2": 29X90mm, 27X82mm (12-point), 22X50mm, 3/8": 7/8"X90mm, 1-1/16"X74mm, 7/8"X80mm, 22X31mm

Product code: MG50323

1/2" Special socket wrench set for passenger cars

A versatile 1/2" drive socket set, featuring 6-point, 3-point, 10-point, and pentagon sockets for a variety of automotive tasks, including Toyota idler gear fixings, Nissan and Renault clutches, Honda Civic control arms, and more.

Product code: MG93289

Steering Rack Side Nut Wrench for Ford, Nissan, Renault, Volvo, Lincoln models

Special tool for safe mounting, dismounting, and adjusting aluminum alloy steering rack nuts, preventing damage. Works with a wrench for precise handling.

Product code: MS00011

Steering rack bushing tool for Toyota Avalon, Camry

Specialized nut socket for safe installation and removal of steering rack bearing bushings, compatible with Lexus ES and Toyota Avalon and Camry models.

Product code: MS00065

Cooling system and radiator cap pressure test kit, 27pcs

Kit contains 27 pieces of equipment including 22 different test caps, a vacuum pump, pressure pump, cone adapter, and air bleeding/coolant hoses

Product code: DK-230547

Transmission oil filter wrench for VAG DSG gearbox

Specialized 24mm wrench for VAG DSG gearbox filter housing, efficient servicing without battery removal.

Product code: MG96466A

Oil plug socket set, 26pcs

26-piece oil plug socket set – includes various hex, square, spline, and Torx bits for removing oil pan plugs. Compatible with pneumatic tools.

Product code: MG94271

Oil seals extractor head (20/30 mm)

Extractor head for quick removal of oil seals (20–30 mm) from hydraulic cylinders, designed to prevent deformation and damage. Compatible with MS00005 and MS00058 oil seals extractor tools.

Product code: MS00059

Valve lapping tool attachment set for drill

Improve engine valve sealing ability and prevent leaks with our Valve Lapping Tool Attachment Set for drill. Use with drills and fine grinding compound. Features 8mm shaft and 4 suction cup diameters. Working speed 1000-1250rpm.

Product code: MG04A2269

Special wrench for disassembling of power steering pump piston pressure

Special wrench for disassembling the plunger adjustment nut of power steering pumps in Mercedes-Benz vehicles.

Product code: MS00131

200CC Extraction & Fill Pump

200CC Extraction & Fill Pump is ideal for removing and filling brake fluid, antifreeze, transmission fluid, power steering fluid and other fluids.

Product code: MG01Z5830

Tester for diagnostics of alternator's voltage regulators

A user-friendly tester for diagnosing 12/24V automobile alternators with controlled or digital voltage regulators directly on the vehicle.

Product code: MS015A

Steering Rack Side Nut Wrench for Opel models

This specialized wrench is designed for quick and efficient installation or removal of steering rack side tightening locknuts. It ensures safe operation by eliminating the risk of damaging the locknut during use. Manufactured by MSG Equipment, the tool is compatible with various Opel models.

Product code: MS00006

Fitting for testing power steering pump on a test bench for Honda Civic, CR-V, HR-V

Fitting for connecting a power steering pump to a test bench for diagnostics.

Product code: MS00069

Wrench for upper nut of worm gear steering rack for Subaru models

Specialized nut socket for efficient and safe installation/removal of the upper nut of the worm gear in steering racks.

Product code: MS00025

Wrench for upper nut of worm gear steering rack for Toyota Corolla 2002-2007

Specialized nut socket for efficient and safe installation/removal of the upper nut of the worm gear in steering racks. Suitable for Toyota Corolla (2002-2007).

Product code: MS00031

Pressing screw for hub and pulley of power steering pump (М8×1,25) for MS00125 tool

A special tool for press-fitting a hub or a pulley on the power steering pump shaft. The tool is universal and applicable to all vehicle makes and models. The purpose of the tool is to assist in the pump assembly after its repair.

Product code: MS00056

Set of fittings for connection of steering rack to a test bench for BMW 7, BMW X3 models

A set of fittings for securely connecting steering racks to a test bench, compatible with BMW 7 (E65, E66) 2005–2008 and BMW X3 (E83) 2008–2011.

Product code: MS00060

Fitting for testing power steering pump on a test bench for Honda Accord, CR-V

Fitting for diagnosing power steering pumps on a test bench. Compatible with multiple OEM part numbers and suitable for Honda Accord (2003-2008) and Honda CR-V (2001-2012).

Product code: MS00070

Steering Rack Upper Nut Socket, VW Polo

Specialized nut socket for installing and removing the upper nut of the worm gear in electric power steering racks. Prevents damage during assembly and disassembly.

Product code: MS00072

Steering rack worm gear upper nut puller for Fiat Punto models, 32mm

Designed for electric power steering racks, this wrench removes or installs the worm mechanism's upper nut without causing damage.

Product code: MS00098

Steering rack worm gear upper nut socket for Ford Fiesta, 36mm

Designed for electric power steering racks, this wrench removes or installs the worm mechanism's upper nut without causing damage.

Product code: MS00103

Special tool for flaring power steering pump bearing

This tool is used in power steering pump repair. It facilitates grooving and radial flanging of a recess for a retaining ring in the pump cover using a lathe.

Product code: MS00106

Hydraulic steering rack support sleeve wrench for Subaru models

Specialized wrench designed for the disassembly and assembly of the support sleeve in hydraulic steering racks of Subaru vehicles. Ensures precise work while preserving part integrity.

Product code: MS00107

Steering Column Torque Sensor Adjustment Tool for Hyundai Accent

A specialized tool designed for calibrating torque sensors in electric power-assisted steering racks during repairs. Compatible with Hyundai Accent (2006-2010).

Product code: MS00108

Hydraulic Steering Rack Diagnostic Fitting Set

This fitting set is designed for diagnosing hydraulic steering racks on a test bench. It enables precise testing and fault detection, ensuring accurate and efficient inspection.

Product code: MS00111

Hydraulic steering rack retaining ring installer (d26)

Universal tool for installing and removing hydraulic steering rack piston retaining rings. This tool ensures easy and efficient installation or removal of retaining rings securing the piston to the steering rack rod.

Product code: MS00119

Bearing nut wrench for hydraulic steering rack repair for Citroen, Peugeot models

Specialized wrench for disassembling, assembling, and adjusting the side preload nut in hydraulic steering racks. Precision-fit for select Citroën and Peugeot models.

Product code: MS00136

Rotor position sensor puller for electric steering racks

The puller is designed for the safe dismantling of the steering rack rotor position sensor. It provides preserving the integrity of the rack and sensor, eliminates deformation and other types of damage during dismantling.

Product code: MS00143

Special wrench for installation/removal of ball screw bearing nuts of steering racks

Precision tool for securing the ball screw pulley during bearing locknut removal in electric steering rack repairs. Fits various Audi, BMW, Ford, and other models.

Product code: MS00144

Test bench for diagnostics of power steering racks

The MS502M test bench is designed for hydraulic power steering (HPS) rack diagnostics, allowing real-time performance simulation and detection of faults like leaks, packing seal wear, unit body damage, and Teflon ring deterioration.

Product code: MS502M

Test bench for diagnostics of alternators, starters and voltage regulators (12/24V,200A/100A,6kW,400V)

MS002 COМ – multifunctional test bench designed for the quick and the accurate diagnostics of the automotive alternators and starters of the passenger cars and the light commercial vehicles.

Product code: MS002 COM

Steering rack bushing tool for Nissan, Opel, Renault models

A specialized nut socket for safe installation and removal of steering rack bearing bushings for Nissan, Opel, and Renault models.

Product code: MS00064

Shaft seals installer (d26)

A specialized tool for installing seals on hydraulic steering rack rods, ensuring a secure fit without damage. Designed for shafts with a 26mm diameter, this tool simplifies the repair process and prevents seal deformation.

Product code: MS00122

Universal valve spring compressor kit (20, 26, 34mm)

The Universal Valve Spring Compressor Kit is a highly versatile and essential tool designed for the efficient replacement of valve springs and valve stem oil seals on overhead cam engines.

Product code: MG94032

Tool for air spring sleeve spreading

Efficient tool for repairing air spring bellows, designed to fit universal air spring sleeves with a 140 mm diameter.

Product code: MS20003

Steering rack bushing tool for Mazda 323 models

Specialized tool for safely mounting and dismounting steering rack bushings. This tool prevents bushing from deformation. Compatible with Mazda 323 C, F, S IV models.

Product code: MS00027

Wrench for upper nut of worm gear steering rack for Nissan Navara, Pathfinder models

Specialized tool for quick and safe installation/removal of the upper nut of the worm gear in steering racks. Designed for Nissan Navara (D40) and Pathfinder (R51), ensuring quality repair.

Product code: MS00033

Two-stage drill bit for broken glow plugs, diameter 7x4.5mm, 20cm

The drill is used for reaming out a broken M8 x 1 glow plug.

Product code: W0741

Oil drain pan, 15l

Oil drip tray is constructed of high quality, recyclable polythene plastic that is resistant to corrosion so your oil pan will remain durable for carrying oil, gasoline, and antifreeze. 450mm x 145mm

Product code: DK-230533-15

M16 XZN bit, for transmission fluid drain plugs, brake calipers

M16 XZN bit, for Brembo back brake calipers VW Tuareg, Audi Q7. For cylinder head screws and drive chain parts for several German vehicle types (Audi, BMW, Mercedes, VW)

Product code: MG50383

ATF fluid extractor and dispenser, pneumatic, 8L

Our pneumatic ATF fluid extractor and dispenser with a capacity of 8L is a must-have for any mechanic. Prevent spills and control fluid flow easily with the volume guide. Equipped with safety release and various adapters for different transmissions.

Product code: MG04B1091

Oil pressure tester kit, hose with quick couplers, 10 adapters

For oil pump, pressure tester, oil pressure switch testing. Hose with quick couplers, with 10 adapters

Product code: JBM52754

Drain plug wrench

Drain plug wrench. Square heads 8mm and 10mm. For vehicles Citroën, Renault, Peugeot.

Product code: JBM52617

Fuel System Cleaning Machine (Injection System)

Fuel System Cleaning Machine (Injection System) Designed to be a long-lasting, reliable, versatile and efficient machine, it is mechanically and electronically suitable for simultaneous testing and cleaning of diesel engines and petrol engines, including TDI, HDI and COMMON RAIL engines.

Product code: ETM1500

Radiator and Heating Core Cleaning Machine

Radiator and Heating Core Cleaning Machine is a tool used to clean the cooling systems of vehicles. Its main purpose is the effective cleaning of radiators and heating cores, which can accumulate deposits and dirt over time, thus reducing the cooling efficiency.

Product code: RDT3000

Wrench for installation/removal of ball screw bearing nuts of steering racks, Lexus LS

This wrench is used in electric steering rack repair to unscrew the ball screw bearing locknut, ensuring the integrity of rack components during disassembly.

Product code: MS00155

Electric terminal release tool set, 23pcs

Perfectly removes terminals from coolant sensors, wiring harness connectors and terminal blocks. Fit for BMW, Mercedes, Opel, VW, Jaguar, Porsche, Saab, Seat, Skoda, Ford, Renault, Citroen, Fiat, Honda, Mazda, Mitsubishi, and Toyota vehicles.

Product code: DK-230588

Compression pressure test set for diesel engines

The set allows for quick identification of damages to the cylinders and injectors.

Product code: G02510

Manual oil pump 1.5L

Manual suction device with a capacity of 1.5l. The device is designed to suck out or dispense oil and other operating fluids in hard-to-reach places.

Product code: G02124

Spanner rocker pin cap Citroen C5 III , C6 / Peugeot 305 / 405/ 605 / 607 (hardened)

The tool is allows access and fixing to the rocker arm pins for Citroen C5 III, C6 / Peugeot 305 / 405 / 605 / 607 models.

Product code: W0289

Oxygen sensor socket set

This kit allows quick and damage-free replacement of lambda sensors, which are an important part of exhaust gas treatment systems. Different sizes and types of keys ensure that all lambda probe types are suitable, maximizing flexibility and applicability.

Product code: MG50627

Timing tool set for Renault

Timing tool set for Renault 16v engines. Laguna, Safrane, TDC 2.0, 2.5 16v 1996-2001

Product code: MG50620

Wishbone lever tool, sliding type, lockable at 5 points

The device helps to ensure that the swingarms are stably and securely fixed, only they are maintained or installed.

Product code: MG50417

Oil drain plug socket set, 30pcs

Comprehensive 30-piece set compatible with most car brands. Includes hex, square, torx, and specialty sockets, plus accessories. Supplied in a sturdy carry case.

Product code: MG93291

Transmission fluid level gauge, for Mercedes 722.6

Fluid level gauge for Mercedes-Benz 5G-Tronic (or 722.6) automatic transmissions. Suitable for Mercedes-Benz, Jaguar, Maybach, Jaguar, Ssangyong, Porsche, Chrysler, Dodge.

Product code: MG50237

Valve stem seal pliers

For replacing valve stem seals.

Product code: MG50106

Valve spring compressor tool for motorcycles and cars

Ideal for cars, motorcycles and small bore engines. Various sized adaptors makes this item universal as it will remove and compress springs on most cylinder heads.

Product code: MG50101

Steering rack shaft polishing machine

The MS402 polishing machine is designed for grinding and polishing steering rack shafts and other cylindrical components. It removes corrosion and ensures precise surface roughness. Works with 900mm max shaft length and operates at 1500 RPM.

Product code: MS402

Fuel pump remover/installer, 3 claws

The 3-claw fuel pump wrench is a special tool used to disassemble and maintain fuel pumps. This wrench has three adjustable toothed flanges to easily fit different sizes and types of pumps.

Product code: MG50644

Transmission fluid and engine oil level gauge (dipstick) set, Mercedes Benz/Audi

5pcs transmission fluid and engine oil level gauge (dipstick) set for vehicles Mercedes Benz and Audi. Length: 920 - 930 - 1160 - 1200mm.

Product code: JBM53206

Universal clutch aligning tool kit, 17pcs

Universal Clutch Aligning Tool Kit for centering the clutch plate. The 16 cones make it possible to center clutch discs of different sizes. Using a centering kit helps to extend the life of the clutch and ensure reliable operation.

Product code: MG50362

Piston ring compressor 6", 60-175mm

6" piston ring compressor. Ø 60-175mm

Product code: JBM52697

Piston ring compressor 3", 53-175mm

3" piston ring compressor. Ø 53/175mm

Product code: JBM52696

Wishbone lever tool

Wishbone lever tool, Length: 1180mm, Tube: Ø 3.5cm, Brace distance: 50 - 45 - 40 - 35 - 30cm, Fastening support: 15 x 13cm

Product code: JBM51902

Specialized nut socket for installation/removal of bearing bushing of steering rack

A specialized nut socket designed for the precise installation and removal of support bushings in hydraulic steering racks, ensuring component integrity during maintenance.

Product code: MS00068

Universal cooling system pressure test kit, 5pcs

This tool has been designed to check for leaks in the car cooling system. The four universal cone adapters fit a wide range of vehicles and cap sizes. (17-24mm, 28-31.5mm, 37-39.5mm, 47-48.5mm)

Product code: JBM54139

Cylinder pressure test set

A tester that allows you to quickly and easily diagnose leaks in the combustion chamber.

Product code: G02735

Lambda probe socket set 7pcs

A set of professional sockets with special shapes and cuts for unscrewing lambda probes (oxygen sensors) and injectors without dismantling the wires.

Product code: G02687

Piston ring compression set

Piston ring service tool set for install piston rings; 3 pcs piston ring plates/compressors; 1 piston ring expander; Piston ring groove cleaner; 3 blades

Product code: JBM53251

Refractometer optical fluid tester

Professional optical fluid tester, automotive refractometer is used to measure the freezing temperature of the refrigerant fluid, washer fluid and electrolyte density.

Product code: CKB04033

Universal oil filter wrench 80-105mm

Two way filter wrench is designed for the removal and installation of oil filters in cars. For diameter (min-max): 80 - 105mm.

Product code: G02559

Transmission fluid and engine oil level gauge (dipstick) set

Transmission fluid and engine oil level gauge (dipstick) set for Mercedes vehicles. Engine oil dipstick 930mm, transmission fluid level gauge 920, 1220mm.

Product code: MG50931

Head gasket tester kit

Head gasket tester kit. Allows easy diagnosis and quick detection of head gasket failures.

Product code: CKBA4052

Valve lapping tool set. Attachable to drills.

This tool smoothens the surfaces of new valves, ensuring that they fit firmly into the cylinders. With 4 different suction cups with 20, 30, 35, 45mm diameters.

Product code: CKBA2269

Cam belt tension gauge

The timing belt tension indicator can be used to adjust the timing belt movement in ranges of 1daN to 10daN. 

Product code: CKB01597

Oil Plug Socket Thread Repair Kit M15x1.5

A complete kit for repairing and replacing damaged oil plug socket threads. Includes M15x1.5 tap, screw-in plugs, and copper washers for secure sealing.

Product code: CKB0025-3

Oil drain socket set 12pcs

Oil drain hex and square sockets set. Square: 8, 11, 13mm. Hex: 8, 9, 10, 12, 14, 17mm.

Product code: CHS-E1156

Valve stem seal pliers

For valve stem seal replacement

Product code: MG50106A

Chain breaking and riveting tool set

Designed for breaking and riveting drive chains. Suitable for car, motorcycle, bicycle chains.

Product code: G02682

Adapter sleeve (diameter 57mm) for belt pulley wrench for BMW diesel engines

Adapter sleeve (diameter 57mm) for belt pulley wrench for BMW diesel engines.

Product code: C01/0134

Viscous clutch wrench Mercedes Sprinter 3.0 V6 CDI

Viscous clutch wrench for Mercedes Sprinter 3.0 V6 CDI, 4.0 V8 CDI, 642 3.0 CDI.

Product code: W0228

Timing lock for BMW chain pulley 2.5 and 3.0 engines N53, N54

Timing lock for BMW chain pulley 2.5 and 3.0 engines N53, N54.

Product code: C01/0073

Wrench for wheel bearing nut, rear axle, Mercedes Sprinter, VW LT

A tool designed for the removal and installation of rear axle wheel bearing nuts.

Product code: W0236

Timing locks for BMW M60 and M62 3.0, 3.5, 4.0, 4.4, 4.6 engines

Applicable for engines: M60 - 730i, 740i (94-96), M62 - 535i, 540i (96-00), 735i, 740i (96-02), 840i (93-99), X5 4, 4.6 (99-03).

Product code: C01/0060

Timing lock for BMW M43, M70, M73 engines with timing chain

Timing lock for BMW M43, M70, M73 engines with timing chain.

Product code: C01/0049

Timing lock for BMW 1.6 N43, B16, B20 engines

Timing lock for BMW 1.6 N43, B16, B20 engines.

Product code: C01/0024

Clutch aligning tool with 3 sleeves

A high-quality universal tool for locking the clutch disc, ideal for manual alignment (centering) and applying the clutch disc to the pressure plate in cars and vans.

Product code: G02766

Universal pulley fan clutch holder

Designed to remove and install fan clutch and rotate or restrain the camshaft pulley. Adjustable jaw spread and interchangeable pins.

Product code: CKB04049

Air conditioning compressor clutch removal set

A/C compressor clutch removal set for cars (GM, Ford, Chrysler).

Product code: CKB04040

Pneumatic ATF fluid extractor / dispenser 10l

Pneumatic fluid changer for replacing oil in automatic gearboxes and differential gearboxes. The set includes 13 adapters for a wide range of automatic gearboxes (VAG, BMW, Ford and Mercedes-Benz)

Product code: CKB03689

A/C clutch hub removal tool, 21mm (hardened)

Fits universally for Audi, BMW, Mercedes-Benz, Porsche, Smart, Volkswagen, Skoda, Seat, Cadillac, Chevrolet, Vauxhall, Ford, Dodge, Jeep, Alfa Romeo, Fiat, Lancia, Opel, Suzuki, Peugeot, Citroen, Renault, Mitsubishi, Toyota, Puch, Proton, Hyundai, etc. models and makes.

Product code: W0445

Rear crankshaft rear oil seal replacement tool for 3.0 HPI / HDI engines

Rear crankshaft rear oil seal replacement tool for Iveco, Fiat Ducato, Peugeot Boxer, Citroen Jumper 3.0 HPI / HDI engines.

Product code: C05/0202

Fuel pump wrench for Volkswagen Crafter 2006-2016

The Fuel Pump Wrench Volkswagen Crafter 2006-2016 is a specially designed wrench ideal for loosening the fuel pump nut. This key is made of high quality material and perfectly fits Volkswagen Crafter 2006-2016 vehicles. Thanks to its ease of use, you can easily and quickly carry out the necessary maintenance work.

Product code: W0483

Camshaft lock for BMW M60, M62 engines

Camshaft lock for BMW M60, M62, 730i, 740i, 535i, 540i, 735i, 740i, 840i, X5 engines.

Product code: C01/0039

Lock nut wrench for KM16 locknuts

Lock nut wrench for KM16 locknuts. O.D.: 109mm. I.D.: 97.6mm.

Product code: W0624

Face mill cutter for Fiat 1.4 16V shafts

This face mill is specially designed for cutting and preparing Fiat 1.4 16V engine shafts. The cutting diameter of the tool is 32 mm, which is the ideal size for machining the front surface of Fiat 1.4 16V engine shafts. Thanks to the M12x1 thread size, it fits easily to shafts with the appropriate thread.

Product code: W0699

Key / cap to the pin arm KIA CEED, Hyundai i30 (4 teeth)

Key / cap to the pin arm allows access and fixing of rocker arm pins and fits Kia Ceed and Hyundai i30 models.

Product code: W0473

Suspension bushing puller, Opel Vectra B, BMW E36

Ideal for the removal and refitting of the suspension bushes without removing the trailing arm assembly from the vehicle.

Product code: W0001

Timing tool set, Fiat 1.6 16V with belt tensioner

Timing tool set, Fiat 1.6 16V with belt tensioner. Fiat: Brava/Bravo, Doblo/Cargo, Marea/Weekend, Multipla, Palio Weekend, Siena, Stilo, Lancia: Delta, Lybra.

Product code: W0009

Face mill for crankshaft, VW TDI 1.9, 2.5

Face mill for the crankshafts of VW TDI 1.9, 2.5 engines.

Product code: W0017

Adapter + screw of injector puller, Mercedes CDI, VW TDI; Bosch

The tool allows the safe and efficient removal of injectors from the respective engines.

Product code: W0029

Timing tool set Ford 1.6, 1.8, 2.5 D and TD

Timing tool set Ford 1.6, 1.8, 2.5 D and TD

Product code: W0128

Camshaft locking tool VAG, VW, Ford 2.3, 2.8, 2.9 (1991-2005), steel

Camshaft locking tool VAG, VW, Ford 2.3, 2.8, 2.9 (1991-2005) chain driven engines.

Product code: W0130

Timing tool set Alfa Romeo 1.8 / 2.0 16V, 2.0 TS (blue)

This Timing Locking Tool allows you to lock engine camshafts, which is essential for timing chain replacement, timing pulleys, timing belts or other timing system component maintenance.

Product code: W0169

Camber angle setting tool

A useful tool for adjusting the angle of the wheel, mounted between the rim and the body. Correct wheel angle adjustment is important for vehicle handling, steering and wheel wear.

Product code: W0183

Universal fitting set for power steering pumps testing

Universal fitting set for safe connection of power steering pumps to diagnostic benches, preventing mechanical damage during testing.

Product code: MS00555

Adapter for injector valve pulling Opel DTI - diesel

Adapter for injector valve pulling Opel DTI - diesel

Product code: W0226

Tool for fitting and removing stretch ribbed belts

This tool is a versatile and essential tool for fitting and removing stretch ribbed belts. This specialized tool is designed to simplify the process of working with stretch ribbed belts.

Product code: W0267

Fuel filter wrench for Fiat, Opel 1.3, 1.9, Iveco 2.2, 2.3, 3.0

Wrench for unscrewing the fuel filter in Fiat, Opel, Iveco engines.

Product code: W0279

Key variator Volkswagen

On Volkswagen vehicles, the variator key (CVT variator tool) is a special tool used to disassemble or maintain the continuously variable transmission (CVT) variator. The variator key helps to disassemble and assemble the variator unit, which is responsible for the operation of the transmission.

Product code: W0290

Key clutch disc air conditioning Denso 23 mm (hardened)

Product code: W0448

Valve spring extractor adapter 8V

A special tool designed to remove valve springs in 8 valve engines.

Product code: W0442

Adapter / puller injector BMW 1.8 / 2.0 N47

The Adapter/Puller Injector for BMW 1.8/2.0 N47 engines is a specialized tool designed for efficient removal and installation of injectors in BMW vehicles equipped with the N47 engine.

Product code: W0443

Wrench for steering rack rotor bearing nut

Special wrench for dismantling and assembling the rotor bearing nut in electric steering racks, suitable for Lexus GS and IS models.

Product code: MS00163

Key / nut for the bearing nut KM 11 , studs internal

This tool is provide a secure fit and facilitate the proper tightening or loosening of the locknut during bearing installation or removal processes. The key/nut is manufactured using hardened, high-grade materials to ensure durability and strength, making it capable of withstanding the forces involved in working with bearings and locknuts.

Product code: W0508

Bearing nut socket wrench, KM 12, internal pins

Bearing nut socket wrench with internal pins. For KM12 M60 x 2 nuts.

Product code: W0510

Puller for valve springs for 8V, 12V, 16V motors, with additional adapters

Puller for valve springs for 8V, 12V, 16V motors, with additional adapters

Product code: W0071

Engine oil filler set, 24pcs

24-piece engine oil filler set for clean and precise oil filling. Includes angle extension for hard-to-reach areas. Ideal for wide applications and environmentally-friendly use.

Product code: MG91071

Universal belt tensioner wrench set

Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm

Product code: MG50635B

The key to the BMW N54 differential nut

The key to the BMW N54 differential nut is a specialized tool used for loosening or tightening the differential nut on BMW vehicles equipped with the N54 engine. The N54 engine is a turbocharged inline-six engine used in various BMW models.

Product code: W0615

Glow plug reamer, 7mm

Tool for reaming broken glow plug shafts. Diameter: 7mm. Length: 11cm.

Product code: W0632

Lock nut socket wrench, KM 4, 28.3mm, 4 teeths

Socket wrench for bearing nuts, KM 4, 28.3mm, 4 teeths, hex drive.

Product code: W0565

Wrench for KM13 bearing nuts

Wrench for KM13 bearing nuts with an outer diameter of 91mm and an inner diameter of 78mm, this wrench provides a secure and accurate grip on the specific size of KM13 bearing nuts.

Product code: W0592

Puller for rear steering knuckle bushing for KIA and Hyundai

Rear steering knuckle silent puller for KIA, Hyundai.

Product code: W0667

Fan clutch remover for BMW

BMW fan viscous clutch remover. Double-sided holding tool with a spacing of 38mm and 44.5mm.

Product code: W0676

Synchronizer wheel puller, Volvo AT03112C

Tool for removing the gear synchronizer wheel for high and low gears in Volvo truck AT03112C manual transmissions with retarder (decelerator).

Product code: W0649

Socket wrench for lock nuts, KM14

Designed for safe and easy tightening and loosening of lock nuts.

Product code: W0694

Timing lock for Fiat 1.1, 1.2, 1.4 8V

Timing lock for Fiat Panda, Seicento, Punto, Punto EVO, Grande Punto, 500, Doblo, Doblo/Cargo 1.1, 1.2, 1.4 8V engines.

Product code: W0695

Adapter for mounting pin BMW 3 and Z 3 (BMW E36) BMW 31126758510

The Adapter for Mounting Pin BMW 3 and Z3 is a specialized tool designed to facilitate the precise installation or pressing of pins in BMW 3 Series and Z3 models. This adapter is specifically designed to work with a hydraulic or manual press, ensuring a secure and accurate pin installation process.

Product code: W0707

Lock nut socket wrench, KM3

Outer diameter: 32mm, inner diameter: 25mm, teeth: 3.6mm, length 45mm.

Product code: W0718

The key to loosening the nut of crankshaft bearings for motorcycles DKW SB other models

Product code: W425K

Glow plug reamer, 8mm

The 8mm diameter, 11cm long Chisel for glow plug reamer is a specialized tool that removes deposits between glow plugs and sockets. It is recommended to use it before installing new glow plugs to clean the sockets of the glow plugs. This router bit can be used universally on most types of vehicles with M9x1 thread glow plug sockets.

Product code: W0698

Piston Ring Compressor Set

Complete tool set for piston ring cleaning, assembly, and compression. Includes tension bands, cleaner, pliers, and screwdriver.

Product code: BGS1890

Forming Gas Leak Detector

Leak detector for forming gas (5% H₂ + 95% N₂), with flexible probe, LED bar, buzzer alarm, adjustable sensitivity, and carry case.

Product code: BGS3401

Blind Hole Bearing Puller Set, 15pcs

15-piece puller set for removing bearings from blind holes, ideal for gearbox repairs and other tight-fit applications.

Product code: BGS70108

Universal Diesel Injector Extractor Tool Kit

Versatile injector tool set with multiple slide hammers and adaptors for assembly/removal of most diesel injectors.

Product code: BGS8676

Carburetor Synchronization Tester Kit, 4 Gauges, 26pcs

26-piece kit for synchronizing 2-, 3- and 4-carburetor systems in cars and motorcycles. Includes 4 pressure gauges.

Product code: BGS962670

Socket / Wrench For grooved bearing nuts KM 13 ; teeth from the inside

This socket wrench is tailored to fit grooved bearing nuts of KM 13 type. It has teeth on the inside to ensure a snug grip on the bearing nut, allowing for efficient loosening and tightening.

Product code: W0727

Socket 6 Teeth, 107mm for Low Floor Trailers

This is an essential tool for professionals working on low floor trailers. Featuring a robust 6-teeth configuration, it ensures accurate engagement and superior grip.

Product code: W0733

E-torx socket set, E8-E24, 1/2" square drive, 10pcs

Includes sizes from E8 to E24, covering most common requirements. Universal fit for tools with a 1/2" drive.

Product code: DK-121001

Oil filter chain wrench, 60-105mm

This oil filter chain wrench is a versatile and essential tool designed for efficiently removing and installing oil filters. With a range of 60-105mm, it accommodates a variety of filter sizes.

Product code: MG92205

Oxygen sensor socket 22mm, 20mm cut-out, 3/8" square drive

This Oxygen Sensor Socket is specifically crafted for the efficient removal and installation of oxygen sensors on vehicles with computer-controlled engines.

Product code: MG92577

Ignition coil puller tool for VAG engines

The tool is a specifically designed apparatus for the proper extraction of "pencil style" ignition coils from 4 cylinder 1.2, 1.4, 1.8, and 2.0 FSI/TFSI engines used in various VAG models.

Product code: MG97037

Extra long spark plug socket with magnet, 14mm, 3/8" square drive

This Extra Long Spark Plug Socket is a specialized tool designed for the efficient installation and removal of spark plugs. Made from high-quality Chrome Vanadium Steel, this 14mm socket features a 3/8" square drive and is notably extra long at 250mm. The standout feature of this socket is its magnetic end, which securely holds the spark plug for safe retrieval.

Product code: MG95565

Brake cylinder retainer remover

This specialized tool is meticulously designed for the efficient removal and installation of brake cylinders. It simplifies the process by expertly expanding and securely holding the retainer ring, ensuring a smooth operation. This tool also serves a dual purpose in facilitating the removal and installation of locking rings on drive shafts during CV joint service.

Product code: MG96116

Engine timing tool set for Opel (2.0 engine)

This engine timing tool set is specifically designed for Opel vehicles with 2.0 engines, ensuring that the camshafts are securely locked in their timed position during timing chain replacement. It's an essential toolkit for the accurate and safe replacement of the timing chain within the cylinder head.

Product code: MG97047

Engine timing tool set for Opel (2.0 CDTi engine)

This tool set is specifically designed for the 2.0 CDTi belt drive diesel engines found in various Vauxhall/Opel models. It is an essential toolkit when replacing the camshaft drive belt, ensuring the timing is set correctly and the engine runs efficiently.

Product code: MG97055

Timing tool set for Ford

For 1.6 Ti-VCT, 2.0 TDCi engines, Focus, C-Max

Product code: MG50305

Piston ring groove cleaning tool set, 7 pcs

Quickly and reliably removes soot deposits from the groove. It has easily replaceable blades.

Product code: MG04A1040

2-jaw and 3-jaw gear puller set

2 or 3 jaws that can be adjusted to fit various sizes of gears, pulleys, bearings, and other components.

Product code: MG04J1125

Rotor nut dismounting tool for LEXUS GS/IS

Special tool for safely removing the castle nut securing the steering shaft in LEXUS GS and IS models.

Product code: MS00135

Car memory saver, 12V, USB

Car memory saver with USB connectivity allows you to replace your car battery without losing radio codes or memory settings. Made from high-quality materials for flexibility and durability. Easy to carry and safe to use. Connects to an external power source, like a power bank.

Product code: MG99169

Automotive relay extractor pliers, angled jaws

Professional automotive relay extractor pliers with angled jaws (60 degrees) and a spring-loaded composite handle for easy, one-handed operation. 200mm long, suitable for most vehicles.

Product code: MG94093

Glow plug thread repair kit, M12X1.25mm

Provides a firm, gas-tight seal for glow plugs. Fast repair without costly replacements. Includes taps, reamers, thread inserts, and installation tools.

Product code: MG990005

Adapters for suspension arm sleeves, front, Mercedes C-class, 2001-07

Adapters for suspension arm sleeves, front, MERCEDES C-class, 2001-07. It serve for sleeves pulling and pushing with using of hydraulic press.

Product code: W0050

Wrench for truck injectors, MAN, Mercedes (Euro-2), 72mm

Wrench for truck injectors, MAN, Mercedes (Euro-2). Length: 72mm, diameter 22mm, square drive: 1/2"

Product code: W0075

Leak tester for cylinder head gasket

CO2 Combustion leak detect. This tool is designed to check for the leaks between combustion and cooling system of water-cooled engines. With 3 adapters.

Product code: MG04A4052

Rear beam bushing puller Renault Laguna II set (5 adapters)

Rear beam bushing puller set for Renault Laguna II, includes 5 adapters for both original and non-original bushings. Suitable for modified and unmodified bushings.

Product code: W0330

Puller sleeves for the left front beam Ford Focus II; III; C-Max; Volvo

Puller sleeves for the left front beam in Ford Focus II, III, C-Max, and Volvo S40 II, V50. For mounting and removing bushings directly on the car. Compatible with OE bushings: FM-FOC4, 1695011, 1355621, 23032, 30666042.

Product code: W0369

Injector puller Fiat Opel Suzuki 1.3 JTD , CDTI , DDIS

Injector Puller for Fiat, Opel, Suzuki, and Lancia 1.3 JTD, CDTI, DDIS engines. Ideal for safe and efficient injector removal.

Product code: W0494

Rear axle nuts wrench for Mercedes Sprinter W901 and W905

Key for unscrewing rear axle nuts on Mercedes Sprinter W901 and W905 models. Compatible with nut 902 357 01 26.

Product code: W0598

Oil filter cap wrench tool kit, 7pcs

Designed to fit a wide range of vehicles including Mercedes, Cadillac, Buick, SAAB, Dodge, Ford, and Mack trucks, this comprehensive kit features seven wrenches in sizes from 24mm to 38mm, ensuring you have the right tool for any job. Made with precision for a perfect fit, these wrenches allow for the easy removal and installation of oil filter caps, making oil changes quicker and preventing damage to the oil filter housing.

Product code: CKB10180

Air conditioner line tool set

The Air conditioner line tool set can be used to assemble the lines used in the installation or maintenance of the air conditioner.

Product code: MG50129

Oxygen sensor thread chasers, 2pcs

The Oxygen sensor thread chasers comes with tools that allow you to repair a damaged or damaged lambda sensor thread instead of having to replace the entire lambda sensor.

Product code: MG04A6021

Steering rack pinion upper locknut socket for TOYOTA / LEXUS

Special nut socket for safely removing and installing the upper locknut on steering rack pinions in Toyota and Lexus vehicles.

Product code: MS00145

Piston ring pliers, 40-100mm

Designed for installing and removing piston rings. The jaws are designed to protect the piston ring from damage.

Product code: MG50335A

Universal silent block removing and installing kit, 34-84mm

Spindle: M10xP1.5, M12xP1.75, M14xP2.0, M16xP2.0, length/Ø A 44/34, 46/36, 54/44, 56/46, 58/48, 66/56, 68/58, 70/60, 78/68, 80/70, 84/72, B 48/38, 50/40, 52/42, 60/50, 62/52, 64/54, 72/62, 74/64, 76/66mm

Product code: MG50093

Automotive short and open circuit finder

Automotive short and open circuit finder is a tool designed for diagnosing electrical issues in DC circuits. It is used to quickly identify short circuits, locate open circuits, perform wire identification, and trace wires within the electrical system of a vehicle.

Product code: MG04D7003

Seal puller and scraper set

Effortlessly remove seals with our seal puller and scraper set. Forged steel, heat-treated for strength, and rust-resistant for durability.

Product code: MG04C1025

Wrench for upper nut of worm gear steering rack for Lexus, Toyota and VW models

Specialized nut socket for efficient and safe installation/removal of the upper nut of the worm gear in steering racks, compatible with select Lexus, Toyota and VW models.

Product code: MS00020

Steering rack bearing bushing nut socket for SsangYong models, 36mm

This specialized 36mm nut socket is designed for removing and installing the bearing bushing of hydraulic steering racks, ensuring precise disassembly and assembly while preserving part integrity. Compatible with SsangYong Actyon, Kyron, and Rexton models.

Product code: MS00101

Glow plug puller set

Glow plug puller set for removing glow plugs attached to the engine. Comprehensive kit for removing stubborn glow plugs. Ideal for removing plugs that have been unscrewed but jammed due to build-up or where the filament is distorted.

Product code: MG04A6033

Fuel Feed Pipe Pliers

The Fuel Feed Pipe Pliers are excellent for disconnecting fuel connectors for fuel filter replacement or engine repair.

Product code: MG04A3074

Fuel Tank Sender Wrench

Universal fuel tank cap wrench, which can be adjusted between 89mm-170mm, so it is a suitable choice for many types of cars. With 15mm drive.

Product code: MG04A3067

Diesel injector cutter set, 10pcs

Diesel injector cutter set is for re-cutting injector seats when reconditioning diesel engines or replacing the injectors.

Product code: MG04A3015

Stretch belt tool set, 2pcs

A universal tool set for installing tension belts on modern vehicles, which does not damage the belt or the pulley.

Product code: MG04A2313

Spin Valves Pneumatic Machine

Compressed air driven valve sander. With 4 suction cups: 20, 30, 35, 45 mm. Stepless speed control 0-3000 rpm. Easy, simple use. 100 l/min air consumption. The valves can be cleaned much faster with the help of the Spin Valves Pneumatic Machine.

Product code: MG04A2207D

Exhaust spring clamp remover

An exhaust spring clamp remover is required for the professional and safe installation of the spring. Used to remove and install fasteners. Made of high quality steel. Can be used with a 17 mm socket or wrench.

Product code: MG04A2087

Bearing puller set, 9pcs

It’s ideal for removing small gears, wheels, and fittings from shafts also can be used to replace the steering pump, perfect for wiper arm assembly, rebuilding your alternator, removing tightly fitted pulleys, and reaches places that regular gear pullers can’t access.

Product code: DK-230590

Bearing nut socket wrench for steering racks for ACURA and HONDA

Specialized socket wrench for precise handling of the support bushing in ACURA and HONDA steering racks without damaging the part.

Product code: MS00153

BMW Common Rail injector puller set

Allows to remove the injector without disassembling the cylinder head. For BMW M47TU, M57, M57TU engines.

Product code: MG50630

Engine timing tool set for Ford (1.0 EcoBoost engines)

Engine timing tool set for Ford 1.0 EcoBoost engines. Essential for setting and locking the engine and adjusting variable cam timing units. Suitable for Ford B-MAX, C-MAX, EcoSport, Fiesta, Focus, Grand C-MAX.

Product code: MG91784

Oil inspection syringe 350ml

The 350 ml capacity syringe can be used to take an oil sample from the car engine or other oiled systems. Ideal for the transfer of oils/fluids to and from vehide components such as gearboxes and diferentials.

Product code: MG93697

Multi-Purpose Oil Transfer syringe 200cc

Designed to remove oil from transmissions and engines and for use with brake fluid/antifreeze.

Product code: MG93698

Engine timing tool set for Chrysler, Jeep, Dodge (2.8 CRD engine)

The engine timing tool set for Chrysler, Jeep, and Dodge 2.8 CRD engines is used to lock the camshafts and crankshaft in position when setting the engine timing.

Product code: MG96443

Alternator V-belt pulley removal tool for VAG

The Alternator V-Belt Pulley Removal Tool is designed for precision in servicing Volkswagen Audi Group (VAG) vehicles. This tool simplifies the process of removing the alternator's V-belt pulley, aiding in the replacement or maintenance of the alternator.

Product code: MG9872011

Adapters for removing and installing the rocker pin Mercedes W124

These adapters are essential tools for the disassembly and assembly of the control arm pin, ensuring efficient and precise work when paired with the Press W0099.

Product code: W0349

Timing lock Opel Corsa D 1.0

This timing lock tool, specifically designed for Opel Corsa D vehicles with 1.0 engines. This tool is essential for securing the engine components during timing belt or chain replacement, ensuring accurate alignment and preventing potential damage.

Product code: W0402

Viscous Clutch Key Ford Transit 2.3 2.4 3.2 (2001 – 2006)

This viscous clutch key is specifically designed for tightening or loosening the viscous clutch on Ford Transit vehicles. It is an ideal tool for precise and efficient maintenance, ensuring the proper functioning of the clutch.

Product code: W0416

Valve sping puller adapter 20V

This specialized adapter is designed for use with valve spring pullers on 20-valve engines.

Product code: W0441

Timing Lock Set for Mercedes 2.0, 2.1, 2.2 CDI

Ensure precise and efficient engine maintenance with the Timing Lock Set, specifically designed for Mercedes-Benz 2.0, 2.1, and 2.2 CDI engines. This tool is essential for securing engine components during timing adjustments, ensuring accurate alignment and preventing potential damage.

Product code: W0477

Adapter for loosening stuck M14x1 injectors

Hardened adapter for loosening stuck M14x1 injectors. Designed for durability and precision.

Product code: W0536

Wrench / socket for slotted nut KM 7 teeth from the inside

Tempered wrench/socket for slotted nut with KM 7 teeth on the inside, 66mm outer diameter, 48.3mm inner diameter.

Product code: W0569

BMW N20/N26 Balancer Shaft Lock + Oil Pump Gasket Repair Kit

Balancer shaft lock and oil pump gasket repair kit for BMW N20/N26 engines. Compatible with BMW 1, 2, 3, 4 Series, X1, X3, X4, and Z4 models (2011-2017) with 1.6L/2.0L petrol engines.

Product code: W0618

Camshaft wrench , BMW / Mini Actuator B38 B46 B48

Camshaft wrench for BMW and Mini Actuator engines B38, B46, B48. Compatible with BMW 1, 2, 3, 4 Series, i8, and Mini models. OEM: 2360895.

Product code: W0660

Power steering pump pulley service kit, 7pcs

7-piece power steering pump pulley service kit for removing and installing pulleys with 1-1/8", 1-1/4", 1-5/16", and 1-3/8" hubs. Compatible with Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles.

Product code: MG94042

Oil drain plug repair kit, 120pcs

A comprehensive 120-piece set for repairing oil drain plug threads. Includes 6 taps in various sizes, 2 oil drain plugs, and 72 aluminum washers in multiple diameters.

Product code: MG91115

Universal injector seat cleaning set

Universal injector seat cleaning set. Nylon brushes: 15mm, 20mm. Steel wire brushes: 18mm, 22mm, 25mm.

Product code: MG04A3064

DPF Cleaning machine (on-car)

DPF Cleaning machine (on-car) is a device used to clean the DPF (Diesel Particulate Filter) directly in the car. The machine uses special technology to help clean and remove accumulated dirt and particles from the DPF.

Product code: AD3030S

Valve Spring Compressor Set, 7pcs

Compresses valve springs for seal or spring replacement. Fits most SOHC and DOHC engines. Includes 7 components.

Product code: BGS8255

Dual clutch disassembly and installation tool set for Ford DPS6-DCT

Dual Clutch Disassembly and Installation Tool Set for Ford DPS6-DCT – precisely designed for safe removal and installation of dual-clutch systems, ensuring accuracy and preventing transmission damage.

Product code: MG99195

Engine oil filling funnel set, 3pcs

A 3-piece engine oil filling funnel set with a secure, leak-proof design, featuring a transparent chamber and adaptable connectors for quick, mess-free oil changes.

Product code: MG93661

Oil Pressure Test Kit

Oil pressure diagnostic kit with gauge and multiple adaptors. 0–10 bar scale. For detecting leaks in oil systems.

Product code: BGS98007

Test bench for diagnostics of brake calipers

The MS301 test bench is designed for diagnostics of brake calipers of passenger cars and light commercial vehicles. The bench allows you to determine the tightness of the unit by creating hydraulic pressure in it. 

Product code: MS301

Drive shaft impact socket set, 12pt 30-36mm, hex 14-19mm, 8pcs

A professional-grade drive shaft impact socket set, including 12-point sockets (30–36mm) and hex sockets (14–19mm), designed for heavy-duty applications.

Product code: MG93301

Universal brake piston rewind tool adapter set, 3pcs

3-piece set with 2-pin and 3-pin adjustable brake caliper rewind adapters. Includes magnetic 2-pin 3/8" drive adapter, compatible with most vehicles and EPB (Electronic Parking Brake) tools.

Product code: MG98999

Fuel injector removal tool for BMW N55 engine

Specialized tool designed for removing fuel injectors from the cylinder head of BMW N55 engines. OEM Number: 130270.

Product code: MG96505

Engine oil and transmission fluid pressure tester gauge

Engine oil and transmission fluid pressure tester gauge with 400 PSI capacity, 42" rubber hoses, brass fittings, and a complete set of adapters for most vehicles. Durable and versatile.

Product code: MG90107

Engine cylinder bore dial gauge set

Precision bore gauge set for measuring internal diameters from 50mm to 160mm with 0.01mm tolerance. Includes self-centering heads, 12 rods, spacer rings, and a durable case.

Product code: MG90130

Test bench for diagnostics of alternators and starters

The MS005A is a multifunctional test bench for quick and precise diagnostics of automotive alternators and starters in passenger cars and trucks. It supports 12V, 24V, and 48V belt starter generators controlled via CAN bus.

Product code: MS005A

Tester for diagnostics of power steering system

The MS510 tester is used for diagnosing the hydraulic power steering system by determining the pressure generated by the vehicle's power steering pump in different operating modes (with load and without).

Product code: MS510

Test bench for diagnostics of power steering pumps

Test Bench MS504 is used for evaluation of the technical condition and output characteristics of mechanically driven single- and double-circuit pumps. The bench simulates operation of the tested unit in a car.

Product code: MS504

Test bench for diagnostics of alternators, starters and voltage regulators (12/24V, 100A/50A, 4kW, 230V)

MS004 COМ – multifunctional test bench designed for the quick and accurate testing of 12/24V alternators, starters, and voltage regulators in passenger cars and light commercial vehicles.

Product code: MS004 COM

Balance shaft lock tool (large) for BMW (N40/N42/N45/N46)

A specialized balance shaft locking tool for BMW N40, N42, N45, and N46 engines. Features an L-shaped design with a 9mm slot, ensuring precise alignment and secure locking during engine timing procedures.

Product code: MG99565

Tester for diagnostics of alternator's voltage regulators

The MS012 COM tester enables accurate diagnostics of 12/24V voltage regulators independently from alternators. It simulates alternator operation to evaluate regulator performance and determine the correct replacement.

Product code: MS012 COM

Tester for diagnostics of electromagnetic valves and clutches of vehicle air conditioner compressors

A compact tester for evaluating electromagnetic clutches and control valves in automotive climate systems, ensuring quick and accurate diagnostics.

Product code: MS121

Steering Rack Side Nut Wrench for Daewoo, Opel and Saab models

This specialized wrench is designed for quick and efficient installation or removal of steering rack side tightening locknuts.

Product code: MS00013

Steering rack bushing tool for Honda models

Specialized tool for safely mounting and dismounting steering rack bushings, preserving aluminum alloy nuts. Compatible with Honda Accord VIII sedans and wagons. Work with this device is carried out with a wrench.

Product code: MS00023

Steering rack adjusting tool for side nuts for Lexus, Mazda and Toyota models

Effortlessly mount, dismount, and adjust side tightening nuts of steering racks without deformation. Compatible with various Lexus, Mazda, and Toyota models.

Product code: MS00029

Oil seal installer tool for hydraulic cylinder

Professional tool for precise installation of oil seals into the hydraulic cylinder and rack mechanism of steering systems. Universal tool for all car models.

Product code: MS00030

Wrench for bottom nut of worm gear steering rack

Durable and precise tool for mounting and dismounting the bottom nut of worm gear steering racks, ensuring the nut remains in excellent condition. Compatible with multiple car models.

Product code: MS00032

Steering Rack Side Nut Wrench for Nissan and Samsung models

Specialized tool for easy and safe installation, removal, and adjustment of the steering rack side tightening nut. Designed to prevent nut damage and ensure smooth maintenance for various Nissan models and Samsung SM5 (A32).

Product code: MS00034

Steering Rack Side Nut Wrench for MITSUBISHI LANCER IX

Specialized tool for easy installation, removal, and adjustment of the steering rack side tightening nut. Designed for Mitsubishi Lancer IX models, ensuring damage-free maintenance.

Product code: MS00035

Steering Rack Side Nut Wrench for Ford USA Probe, Mazda 626 III, IV and Xedos 6 models

Specialized tool for the installation, removal, and adjustment of the steering rack side tightening nut. Designed for Ford Probe II and Mazda 626 III, IV and Xedos 6 models, ensuring precise and damage-free maintenance.

Product code: MS00036

Steering rack bushing tool for Ford and Nissan models

Specialized tool for quick installation and removal of steering rack bearing bushings. Manufactured by MSG Equipment, designed for Ford and Nissan models, ensuring efficient and deformation-free maintenance.

Product code: MS00039

Special wrench for disassembling of power steering pump

Special wrench for safe disassembly of power steering pump covers with complex shapes. Prevents damage, works with 22 mm wrenches, compatible with Nissan and Renault models.

Product code: MS00041

Steering rack bushing tool for Ford Focus, Tourneo and Transit models

Specialized steering rack bushing tool for Ford Focus, Tourneo and Transit models, ensuring quick and damage-free installation or removal of bearing bushings.

Product code: MS00044

Pressing screw for hub and pulley of power steering pump (BSW 3/8") for MS00126 tool

A special tool for press-fitting a hub or a pulley on the power steering pump shaft. The tool is universal and applicable to all vehicle makes and models. The purpose of the tool is to assist in the pump assembly after its repair.

Product code: MS00057

Set of fittings for connection of steering rack to a test bench for Audi A4, A5, A8, Q5 models

A set of fittings for securely connecting steering racks to a test bench, designed for diagnostics of steering rack technical conditions, compatible with specified Audi models.

Product code: MS00061

Steering Rack Bearing Bushing Nut Socket for Hyundai Tucson, KIA Sportage

Specialized nut socket for installing and removing the bearing bushing of the steering rack. Designed for hydraulic steering rack repairs, ensuring precise disassembly and assembly of the support sleeve.

Product code: MS00071

Steering rack bearing bushing crown socket for Great Wall Hover and Opel Frontera

Specialized nut socket for installing and removing the bearing bushing of the steering rack. Designed for hydraulic steering rack repairs, ensuring precise disassembly and assembly while preserving the part’s integrity.

Product code: MS00073

Steering rack bushing tool for Seat and VW models

This specialized wrench is an essential tool for hydraulic steering rack repairs. It simplifies the disassembly and assembly of the support sleeve, ensuring the part remains intact and undamaged for future use.

Product code: MS00078

Steering Gear Side Preload Nut Wrench

A specialized adjusting nut socket designed for the precise disassembly, assembly, and adjustment of the side preload nut in hydraulic steering racks. It ensures secure operation while preserving the integrity of the nut.

Product code: MS00089

Tool for mounting and dismounting of steering rack pinion bottom nut

An external star wrench designed for mounting and dismounting the steering rack pinion bottom nut in electric power steering racks. Ensures secure tightening and loosening without damaging the nut.

Product code: MS00090

Specialized nut socket for installation/removal of bearing bushing of steering rack

A specialized nut socket designed for disassembling and assembling the support sleeve during hydraulic steering rack repairs. Ensures safe and precise work while preserving the integrity of the part.

Product code: MS00091

Steering rack worm gear upper nut socket, 36mm

Designed for electric power steering racks, this wrench removes or installs the worm mechanism's upper nut without causing damage. Designed for Alfa Romeo, Fiat, Ford, Honda, Jeep, and Lancia vehicles

Product code: MS00102

Steering rack bearing bushing nut sucket for Kia Carens/Rio/Sephia, 27mm

This wrench is used during hydraulic steering rack repairs for disassembly and assembly of the support sleeve. It facilitates the process while preserving the integrity of the part for further use.

Product code: MS00105

Steering rack nut removal wrench for Acura, Honda, Mazda models

The MS50117-EPS wrench is designed for steering rack repairs with electric power assist. It ensures safe disassembly of couplings and shafts from the rack housing while preserving the nut's integrity.

Product code: MS00117

Shaft seals installer (d30)

A specialized tool for installing seals on hydraulic steering rack rods, ensuring a secure fit without damage. Designed for shafts with a 30mm diameter, this tool simplifies the repair process and prevents seal deformation.

Product code: MS00124

Lock nut wrench for steering rack bearing for BMW models

Specialized wrench for safe and efficient servicing of the lock nut in steering rack bearings on BMW 1 Series (2004–2011), BMW 3 Series (2005–2012), BMW X1 (2009–2015) models.

Product code: MS00151

Swivel Vise for shock absorbers and steering racks

Swivel vise for safe and efficient assembling and disassembling of shock absorbers and steering racks.

Product code: MS20002

Valve Cover Puller for Mercedes Air Springs

Puller for safe installation and removal of valve covers on Mercedes air springs, adjustable for diameter and eccentricity.

Product code: MS20007

Residual Pressure Valve Wrench 18mm for Air Suspension Struts

Special wrench for mounting and dismounting 18mm residual pressure valves in air suspension struts of Volkswagen Touareg and Porsche Cayenne vehicles.

Product code: MS20010

Universal Parking Brake Mechanism Tool for TRW Brake Calipers

Special tool for installation and removal of parking brake mechanisms in rear TRW brake calipers, suitable for all vehicle makes.

Product code: MS30001

Universal Parking Brake Mechanism Tool for ATE Brake Calipers

Special tool for installation and removal of parking brake mechanisms in rear ATE brake calipers, suitable for all vehicle makes.

Product code: MS30002

Air Brake Bleeding and Oil Extraction Unit – Pneumatic and Manual, 10L

10L pneumatic and manual oil extractor with brake bleeder, for non-corrosive fluids, with multi-diameter suction hoses and one-hand valve operation.

Product code: BGS3155

Cordless UV Leak Detection Set – for Air Conditioning Systems (R134a)

Cordless UV leak detection kit for R134a AC systems, includes UV lamp, goggles, battery, charger, syringe, and low-pressure fittings.

Product code: BGS3710

Long/Flat Nose and Spark Plug Connector Pliers Set,extra long, 9pcs

9-piece extra-long pliers set with various tip designs for confined spaces; includes spark plug connector and specialty nose pliers.

Product code: BGS4401

Double Flaring Tool Kit with Pipe Cutter, 10pcs

10-piece flaring tool kit for creating single and double flares, includes pipe cutter and dies for 4.75–12mm pipes.

Product code: BGS70221

Pneumatic Injector Extractor Set

Pneumatic injector extractor with 38mm stroke and 600N impact force for removing seized diesel injectors. Includes 21 thread adapters for various injector types.

Product code: BGS74512

Blind Hole Bearing Puller Set with Slide Hammer, 5pcs

5-piece puller set for removing bearings and bushings from blind holes. Includes slide hammer.

Product code: BGS8598

Wheel Bearing Mounting Disc Set, 52 pcs

52-piece set for mounting bearing shells, seals, and bushings. Ø18–65 mm + 74 mm discs. Usable with press or hammer.

Product code: BGS98467

Transmission Oil Filling Tool with Hand Pump, 7L, with 8 Adaptors

Manual pump tool for filling manual and automatic transmissions. 7L tank, 80 cm³ per cycle. Includes 8 adaptors.

Product code: BGS9992

Piston ring compressor, 3"x125

Piston ring compressor, 3"x125. Allows the assembly of pistons without damaging the piston rings.

Product code: G02620

Brake Disc Lathe Machine (Two-Functions)

Brake Disc Lathe Machine (Two-Functions) is specialized model to offer dual functionality. It has the feature of grinding both on the vehicle and outside with additional apparatuses to the existing disc lathe machine.

Product code: FDT7000

Bearing puller set, 14pcs

Designed for pulling bearing off shaft and separating bearing housings.

Product code: DK-230589

Camshaft timing chain tensioner for Audi, VW, Seat

Camshaft timing chain tensioner. For Audi and VW 1.8L Turbo I4, 2.7L Bi-Turbo V6, 2.8L V6 and 4.2L V8 engines.

Product code: CKB10035

Rear trailing arm bushing removal tool for Ford and Volvo

Remove and install rear trailing arm bushings on Ford and Volvo vehicles without disconnecting brake lines or removing bolts. Fits multiple models. OEM code 205-1017.

Product code: MG04B2126

Mercedes-Benz timing chain riveting tool set

Mercedes-Benz timing chain riveting tool set. For Mercedes Benz, Chrysler, Jeep 1.7-4.0 diesel engines.

Product code: MG04A2298

Common rail diesel high pressure tester kit

Our Common Rail Diesel High Pressure Tester Kit is an essential tool for accurately measuring high pressure fuel circuits in diesel common rail systems. With a safety release of 1500bar, it includes a 2000bar dial gauge, high pressure flexible hoses, adapters, screws, and holding bottle. Perfect for engine pressure tests, pump pressure tests, regulator tests, and injector leakage tests.

Product code: MG04A3100D

SAC clutch disassembly and assembly tool set

SAC clutch disassembly and assembly tool set for Audi, VW, Ford, Mercedes, BMW, Alfa Romeo, Fiat, Lancia

Product code: MG04B1083D

Injector nozzle extractor set

This injector seat removal tool kit is the perfect tool for common rail systems, specifically designed for MERCEDES-BENZ CDI engines.

Product code: MG50350

Brake bleeder tool, 1L

This compact and easy-to-use device enables a quick and efficient venting process. Up to 90-120psi

Product code: MG04B4091

Alternator repair set, 24pcs

Alternator repair set, 24pcs which is specifically designed to remove the alternator freewheel pulley.

Product code: MG04D2001

Torque angle gauge with magnetic arm

Torque angle gauge with magnetic arm is a special tool used to measure the angle of rotation during torque tightening operations.

Product code: MG04Z0018

Drum Brake and Brake Disc Lathe Machine

Drum Brake and Brake Disc Lathe Machine is suitable for discs and drums of all cars and light commercial vehicles. The deformation that occurs on the surface of the drum over time can be removed by grinding with our machine. In this way, you can get a surface as if it were new. The turning process can be done automatically or manually. Thanks to the locking function of the disc lathe, the disc can also be turned if necessary.

Product code: KTM1000

DPF Cleaning machine (on-car)

DPF Cleaning machine (on-car) is a device used to clean the DPF (Diesel Particulate Filter) directly in the car. DPF is a system in diesel engines that helps reduce harmful exhaust gas emissions with the particulate filter. The machine uses special technology to help clean and remove accumulated dirt and particles from the DPF.

Product code: AD3030

Oil filter wrench Fiat, Opel, Alfa Romeo 1.3, 1.6, 1.9. 2.0 - 75.3 x 16 hex

Our oil filter wrench Fiat, Opel, Alfa Romeo 1.3, 1.6, 1.9, 2.0 - 75.3 x 16 hexagonal product is an ideal choice for all car owners. The wrench helps you change the oil filter efficiently and easily, saving you time and energy. Thanks to its size of 75.3mm x 16mm, it fits perfectly with the above-mentioned models.

Product code: W0484

Injector nozzle extractor set

The Injector Nozzle Extractor Set is a specialized toolkit designed for the precise task of removing injector nozzles from specific diesel engines. This set is particularly tailored for use with PSA 2.0 HDI engines found in Peugeot and Citroën vehicles, as well as PSA 2.0 JTD engines utilized in Fiat and Lancia models.

Product code: MG50638

Timing tool set for VW, Audi

Crankshaft locking tool, camshaft locking tool, panel removal tool, shock absorber tool, ribbed belt tensioner, for 2.8 V30, 2.7 Turbo, 4.2 V40, 4.2, 5.2 FSI, 2.4, 2.6, 2.7, 2.8, 4.2, 6.0 petrol engines, 2.5, 2.7, 3.0 TDI, 3.0 TDI CR

Product code: MG50356

Timing belt tension meter

A two-sided scale allows measurements to be made from either side, showing the tension in Nm

Product code: MG50607

Injection nozzle socket set

25, 27, 28, 29, 30mm Siemens, Bosch, for Peugeot and Citroen 2.0 HDI engines

Product code: MG50604

Ball joint separator tool set, replaceable heads, 20, 22, 24, 27, 30mm

The Ball Joint Separator Tool Set designed to facilitate the easy and safe removal of ball joints from vehicles. This set is particularly valuable due to its versatility and efficiency in handling different sizes of ball joints, which is achieved through its set of replaceable heads and adjustable features.

Product code: MG50436

1/2" impact XZN bit socket set for VW brake calipers

1/2" impact XZN bit socket set for VW Transporter, LT M14 (length 43, 78mm), Golf M18 (length 43, 78mm), Sharan M16 (length 43, 78mm)

Product code: MG50385

Injector nozzle extractor set for Mercedes-Benz, Chrysler

Mercedes C-Class, E-Class, Sprinter (611, 612, 613) Chrysler Grand Cherokee 27crd (00'-)

Product code: MG50357

Key / nut for the bearing nut KM 9 , studs internal

This wrench is specifically designed to fit the KM 9 groove nut with teeth on the inside.

Product code: W0564

Timing tool set for Land Rover, Jaguar

For 2.7TD V6 engines

Product code: MG50307

Petrol fuel pump pressure test kit, 0-7bar, 1/4", 3/8" adapters

For petrol fuel pump pressure testing. For injection systems (except the CIS-Jetronic, Bosch and the GM throttle valve systems).Measuring range 0-7bar(0-100psi)

Product code: MG50195

Key to the oil plug Volkswagen, Audi, Seat, Skoda TSI; TFSI

The Key for the Oil Plug is a specialized tool designed for Volkswagen, Audi, Seat, and Skoda vehicles equipped with TSI (Turbocharged Stratified Injection) or TFSI (Turbo Fuel Stratified Injection) engines. This tool is specifically tailored to facilitate the removal and installation of the oil plug during oil changes or maintenance procedures.

Product code: W0581

Oil pressure test kit

This oil pressure test kit offers a high-quality and precise tool for accurately measuring oil pressure.

Product code: MG50193

Petrol engine compression tester kit

A Petrol engine compression tester kit is a tool that can be used to check the tightness and performance of engine pistons in the combustion chamber.

Product code: MG50192

Compression test kit

It can be used for gasoline engines of cars and vans with 12 or 16 mm spark plugs. Shows the percentage of cylinder leakage and cylinder pressure.

Product code: MG50191

Bearing separator set

Bearing separator set, capacity 30-50mm, 50-75mm, 2 separators, 1 forcing screw, 4X2 extensions

Product code: MG50132

SAC clutch alignment tool set, for 3- and 4-bore SAC clutches

The SAC Clutch Alignment Tool Set is an essential kit designed for the precise alignment and installation of 3- and 4-bore SAC clutches. This comprehensive set is compatible with a wide range of vehicle models from Audi, Fiat, Renault, Opel, Volvo, and specifically for the 4-bore SAC clutch of Mercedes-Benz A Class (04-).

Product code: MG50068

Bearing puller 10-30mm

The clamp can be adjusted with screws 10-30mm. It is suitable to extend existing inventory. With the scraper you can accurately remove the bearing without damaging it.

Product code: MG04J1171

Injector seat milling and cleaning kit

The kit is suitable for renovating a diesel injector housing, cleaning an injector housing and bore, as well as a glow plug bore using milling cutters.

Product code: MG04A3065D

6pcs Trim pad removal tool kit

The door trim removes the patents simply and without damaging them. Can be applied to both metal and plastic fastening elements. The upholstery kit has three types of heads with two different lengths.

Product code: MG04C1024

Transmission oil filling system (ATF) with 8 adaptors

The ATF (Automatic Transmission Fluid) transmission oil filling system is a professional tool designed to accurately and cleanly refill transmission oil.

Product code: MG04B1101

Clutch centering mandrel, 11pcs

11pcs clutch centering mandrel with accessories, Ø20-26.6mm, Ø15-19mm, Ø23-36mm, Accessories diameters: 12, 14, 15, 16, 17, 18, 19, 20mm

Product code: JBM53410

Clutch centering mandrel, 2pcs

2pcs clutch centering mandrel, Ø20-26mm, Ø15-19mm

Product code: JBM53392

Heating tube assortment, 127pcs

127pcs heating tube assortment, 30pcs M2x40, 25pcs M2.5x40, 20pcs M3.5x40, 20pcs M5x40, 16pcs M7x80, 8pcs M10x80, 8pcs M13x85

Product code: JBM53374

SAC clutch adjusting tool kit

Clutch deformations are avoided using the pretensioner. Using the reset tool, we will bring the reset ring of the pressure plate to the new position when mounting a new clutch valve.

Product code: JBM53001

Pneumatic CV boot installation tool (8bar)

The CV boot installation tool is to be used solely for the stretching of flexible CV boots onto drive-shaft assemblies of automotive vehicles.

Product code: JBM52994

Universal belt tensioner wrench set

Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm

Product code: JBM52832

Transmission oil filling system (ATF)

Transmission oil filling system. Capacity: 7.5l, Outlet: 80cc cycle, Viscosity range up to SAE140. Includes 15 accessories for Ford 1/8 - 27, universal BMW, Honda, Nissan, VW, Audi, Skoda, Porsche, Mini Cooper, Mercedes, Hyundai. Universal and flexible 300mm hose.

Product code: JBM52797

Insulated screwdriver set, 8pcs, 1000V

Fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1000V. (SL: 3x75mm, 4x100mm, 5.5x125mm, 6.5x150mm - PH: 0x75mm, 1x80mm, 2x100mm - Voltage tester: 140mm, SL 0.5x 3.0mm)

Product code: JBM15162

21pcs 12 point socket set. Sizes: 8-36mm

Suitable for both metric and inch (SAE) standard 6 point Torx and 12 point screws.

Product code: G13547

Adapter set for gearbox fluid change (ATF)

Adapter set for gearbox fluid change (ATF).

Product code: G02733

18pcs socket set for oil drain plugs

Specialized socket set for unscrewing drain plugs in oil pans. The set includes 17 sockets with 3/8" drives.

Product code: G02711

Bearing and gear puller with 3 jaws. Working range: up to 10" (254mm)

Bearing and gear puller with 3 jaws. Working range: up to 10" (254mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02245

Bearing and gear puller with 3 jaws. Working range: up to 4" (102mm)

Bearing and gear puller with 3 jaws. Working range: up to 4" (102mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.

Product code: G02231

Two jaw gear and bearing puller. Operating range: up to 150mm

Two jaw gear puller with adjustable clamping depth and width.

Product code: G02201

Two jaw gear and bearing puller. Operating range: up to 100mm

Two jaw gear and bearing puller with adjustable clamping depth and width.

Product code: G02200

Handheld vacuum tester and brake bleeding kit

Professional vacuum and pressure diagnostics tool used to test a variety of essential engine and associated functions including fuel, ignition, transmission and emissions.

Product code: G01156

Oil change syringe 400ml

Oil change syringe is suitable for removing or replacing oil in engines and gearboxes. Translucent body allows easy inspection of oils and fluids.

Product code: G01152

Manual fuel transfer and priming pump

Hand pump for pumping and bleeding diesel fuel systems when replacing the fuel filter and other work related to the fuel system.

Product code: G00985

Fish tape, 15m, green

15m steel cable fish tape in plastic green case. Flat metal tape, size 3x1mm. Insertion head size 40x10x3mm.

Product code: FT50-GREEN

Wire terminal release set 23pcs

Wire terminal release set 23pcs. For removing terminals from electrical connectors of BMW, Mercedes, VW, Audi, Jaguar, Porsche, Saab, Skoda, Ford, Renault, Citroen, Chrysler, Flat, Honda, Mazda, Mitsubishi, Toyota, Opel, Seat brand cars.

Product code: CKBD2035

Overhead valve spring removal tool

Allows valve springs and valve stem oil seals to be replaced in the cylinder head. For OHV, OHC and CHV engines.

Product code: CKBA2114

Oil cap socket set with ratchet and wrench

A set for unscrewing oil filter caps.

Product code: CKB04111

Coil spring compressor kit

Coil spring compressor kit for passenger cars and vans. Max working lenght: 300mm. Max. pressure: 2.651kg.

Product code: CKB04027B

Car stethoscope

The car stethoscope is used for auscultation diagnosis. Eliminates sounds from other points than auscultated. 

Product code: CHS-A1022

Cylinder leak-down tester

A classic device for checking the tightness of cylinders with compressed air in a compact design. Adapters: M14x1.25 (short), M18x1.5, M14x1.25 (long).

Product code: CHS-A0021

Suspension support rod measuring tool

The device is designed for precise measurements of the curvature of the front suspension support pipes. Dial indicator not included.

Product code: C06/0212