Timing tool set for Citroen, Peugeot, DS, Opel 1.2L PureTech Euro 6.3

Timing locks for Ford, Mazda 1.8 / 2.5 D, TD, DI, TDCI, TCI

Timing locks for Ford, Mazda 1.8 / 2.5 D, TD, DI, TDCI, TCI.

Product code: C01/0008

Camshaft setting tools for Audi (V8 4.2 40V engine)

This set of Camshaft Setting Tools is specifically designed for Audi's 4.2L 40-valve V8 engines, commonly found in models such as the Audi B6 S4, Audi B7 S4, Audi A6, Audi A8, and the Volkswagen Phaeton. These tools are crucial for accurately fixing the position of the camshaft position sensor rotor ring during the installation of camshaft timing chains.

Product code: MG9411202

Engine timing tool set for Mercedes-Benz (M651)

This engine timing tool set is specifically designed for Mercedes-Benz vehicles equipped with the chain-driven 1.8/2.1 CDI Diesel Engines, identified by the engine code prefix 651.xxx. The set includes tools necessary for accurately positioning the camshaft in the installed position and for the rotation, installation, and dismantling of the crankshaft pulley.

Product code: MG91725

Mercedes-Benz camshaft pulley socket T100H, 1/2" square drive

This Mercedes-Benz Camshaft Pulley Socket, featuring a T100H profile and a 1/2" square drive, is an expertly designed tool specifically for correcting the position of the camshaft pulley on various Mercedes-Benz engines.

Product code: MG91712

Lock timing Porsche 2.5; 2.7; 3.2; 3.4

This tool is used to immobilize the camshafts and crankshaft in their proper positions during timing belt or chain replacement, as well as other engine maintenance tasks.

Product code: W0623

Camshaft lock for Mercedes A, E, S and Vito

Camshaft lock for Mercedes-Benz 1.8, 2.1 CDI engines from 2012 with code: 651. OEM: 651 589 00 40 00.

Product code: W0590

Timing lock Land Rover 2.5D / Td5 on the timing chain

A tool often used to fix the control of the Land Rover 2.5D/Td5 engine on the control locking chain. This special tool locks the timing chain in place, preventing it from moving or shifting during timing adjustment.

Product code: W0466

Flywheel and injection pump locking pin for BMW

Flywheel and injection pump locking pin for BMW. M40, M42, M43, M44, M50, M52, M52TU, M54, M56 engines.

Product code: W0460

Cam Lock Alfa Romeo 1.7; 1.8 TBI

Cam Lock Alfa Romeo 1.7; 1.8 TBI is used for locking the camshafts in place during various engine maintenance and repair procedures.

Product code: W0336

Key crankshaft Citroen / Peugeot, petrol 1.8/2.0/2.2 16V HPI "EW" belt

Key crankshaft Citroen / Peugeot, petrol 1.8/2.0/2.2 16V HPI "EW" belt

Product code: W0273

Timing tool set Fiat Ducato 2.2 JTD

Timing tool set Fiat Ducato 2.2 JTD

Product code: W0204

Timing tool set Alfa Romeo 1.8 / 2.0 16V, 2.0 TS (blue)

This Timing Locking Tool allows you to lock engine camshafts, which is essential for timing chain replacement, timing pulleys, timing belts or other timing system component maintenance.

Product code: W0169

Timing lock for BMW M60, M62 engines

Timing lock for BMW M60, M62, 730i, 740i, 535i, 540i, 735i, 840i, X5 engines.

Product code: C01/0038

Timing lock for BMW dual engine block M52, M54 and M56 with Vanos

Timing lock for BMW dual engine block M52, M54 and M56 with Vanos.

Product code: C01/0065

Timing lock for BMW N40, N45 engines

Timing lock for camshafts and variators for BMW N40, N45, N45T (B16) 2001-2009 engines.

Product code: C01/0096

Timing tool set for BMW N51, N52, N52K, N53, N54, N55 2.5 and 3.0 engines

Timing tool set for BMW N51, N52, N52K, N53, N54, N55 2.5 and 3.0 engines. OEM: 11.4.280, 11.4.281, 11.4.282, 11.4.283, 11.4.285, 11.4.290, 11.0.300, 11.8.520/521, 11.9.340.

Product code: C01/0235

Cambelt tension wrench set, 14pcs

Cambelt tension wrench set with 13 interchangeable adapters, suitable for almost all types of vehicles.

Product code: MG04A2305

Camshaft timing tool set for BMW, N42, N46, N46T

Camshaft timing tool set for BMW, N42, N46, N46T

Product code: MG50659

Timing tool set for Chrysler, Jeep and LDV

For 2.5 és 2.8 CRD timing belt engines, Chrysler, Jeep and LDV.

Product code: MG50386

Camshaft, crankshaft, flywheel locking tool set

Camshaft, crankshaft, flywheel locking tool set for petrol and diesel belt engines, Citroen, Peugeot, VW, Opel, Rover, Isuzu, Saab, Ford, Renault, Fiat

Product code: MG50083

BMW crankshaft pulley holder (E39, E46, E60, E61, E81, E83, E90, E91)

Crankshaft pulley holding tool for BMW 3 and 5 Series. Holds the vibration damper when loosening or tightening the central crankshaft bolt.

Product code: MG04A4041

Front axle hub disassembly and assembly kit for Ford Transit (2000-)

The set is used to disassemble and assemble the front axle hub and bearings on Ford Transits manufactured after 2000.

Product code: C02/0108WF

Timing lock Ford 2.2 TDCI engines

Timing lock Ford 2.2 TDCI Transit, Econetic HDT diesel engines.

Product code: C01/0191

Timing lock for Citroen, Peugeot 1.0 and 1.2 THP VTI engines

Timing tool for Peuegot, Citroen 1.0 and 1.2 VTI, e-VTI, e-THP engines.

Product code: C01/0193

Timing lock set for Fiat, Lancia 1.2 and 1.4 8V engines

Timing lock set for Fiat Grande Punto, Panda, Idea, Doblo and Lancia Ypsilon, Fire Evo 1.4 gasoline engines.

Product code: C01/0172

Socket for removing rear axle nut in Mercedes Vario

Socket for removing rear axle nut in Mercedes Vario.

Product code: C01/0164

Belt pulley wrench for BMW diesel engines

Belt pulley wrench for BMW diesel engines.

Product code: C01/0100

Timing lock for BMW M60 and M62 3.0, 3.5, 4.0, 4.4, 4.6 engines

Timing lock for BMW M60 and M62 3.0, 3.5, 4.0, 4.4, 4.6 engines.

Product code: C01/0080

Shaft locking pin for Audi, VW 2.4 / 2.8 30V 2.7 Turbo engines

Shaft locking pin for Audi, VW 2.4 / 2.8 30V 2.7 Turbo engines

Product code: C01/0086

Timing lock for BMW 2.5 and 3.0 N51, N52, N52K, N53, N54 engines

The timing lock is used in N51 engines, N52 and N52K with Valvetronic, N53 and N54 engines with direct injection.

Product code: C01/0064

Timing lock for Ford 1.0 Ecoboost (belt in oil) gasoline engines

Timing lock for Ford 1.0 Ecoboost (belt in oil) gasoline engines.

Product code: C01/0058

Timing lock set for Opel 1.0 petrol engines with control chain

Timing lock set for Opel 1.0 petrol engines with control chain (2010-).

Product code: C01/0029

Timing locks for Ford, Mazda, Volvo 1.25, 1.4, 1.6, 1.7, 1.8 16V

Timing locks for Ford, Mazda, Volvo 1.25, 1.4, 1.6, 1.7, 1.8 16V petrol engines

Product code: C01/0013

Injection pump setting tool set for Ford 2.0/2.4 16V

The tool set is specially designed for adjusting the injection pumps of Ford Transit and Mondeo 2.0, 2.4 liter diesel engines. This kit is guaranteed to fit the mentioned engines, so you can easily maintain and adjust the injection pumps.

Product code: W0044

Timing tool set VW/AUDI 2.3/2.8, petrol (2002-2005)

Timing tool set VW/AUDI 2.3/2.8, petrol (2002-2005)

Product code: W0118

Camshaft locking tool Fiat 1.2 8V

The camshaft locking tool for Fiat 1.2 8V is a specialized tool designed for accurately locking the camshaft in place during maintenance or repair work on Fiat vehicles equipped with a 1.2-liter 8-valve engine.

Product code: W0120

Camshaft lock for BMW

Camshaft lock for BMW M40, M43 models E30, E34, E36

Product code: W0139

Timing tool set Renault 1.2, 1.4, 1.6 1.8, 2.0, 2.0 16v Turbo, 1.5 dCi

Timing tool set Renault 1.2, 1.4, 1.6 1.8, 2.0, 2.0 16v Turbo, 1.5 dCi

Product code: W0156

Timing tool set Volvo V 50 16 V 1.8 / 2.0 with chain - petrol

This timing tool set is designed for Volvo V50 16V 1.8 and 2.0 inline petrol engines. The tools are designed to make engine control setup and maintenance easier and more accurate.

Product code: W0177

Timing tool set, Volvo / Ford 2.5 Turbo petrol

Timing tool set, Volvo / Ford 2.5 Turbo petrol

Product code: W0197

Crankshaft locking tool set VW, Audi TDI Diesel 3, 4, 5, 6 cylinders

The Crankshaft Locking Tool Set for VW and Audi TDI Diesel engines is a precise and indispensable tool for the assembly process of 3, 4, 5, and 6 cylinder engines. This set is designed to securely lock the crankshaft in place during various maintenance and repair tasks, ensuring accurate timing and preventing any unwanted movement.

Product code: W0207

Timing belt tensioner tool Lancia, Fiat, Jeep, Ford, Crysler, Alfa Romeo

Timing belt tensioner holding wrench, Lancia, Fiat, Jeep, Ford, Crysler, Alfa Romeo 1.1, 1.2, 1.4 petrol engines with belt.

Product code: W0237

Dial indicator holder for Opel Kadett, Astra, Vectra, 1.6 / 1.7 - Diesel

Optimise control of your Opel diesel engines with the indicator clock holder, specially designed for the 1.6/1.7 diesel engines of the Opel Kadett, Astra and Vectra. This precision tool is essential for accurate timing and control adjustment, ensuring smooth engine operation and longer engine life.

Product code: W0245

Timing tool set Mini One, Cooper 1.6, Cooper 1.6s, petrol, chain

Timing tool set Mini One, Cooper 1.6, Cooper 1.6s, petrol, chain

Product code: W0264

Timing tool set Audi 3.6 / 4.2 V8

This comprehensive tool set is specifically designed to precise timing adjustments for Audi vehicles equipped with 3.6 and 4.2 V8 engines.

Product code: W0268

Lock pulley shaft Volvo (T4, T5) 1.6, 2.0 GDTI

Product code: W0486

Timing lock (adapter,pin) for Renault 2.0 DCi

The Timing locking (adapeter,pin) is a special tool used to maintain and service the timing system of Renault 2.0 liter diesel engines. This is a tool that helps to accurately set the timing of the engine timing and to fix the camshafts.

Product code: W0344

Crankshaft locking pin Ford, Volvo, Mazda 1.25, 1.4, 1.6 Zetec, Duratec

Crankshaft locking pin Ford Fiesta, Focus, Volvo C30, S40, V50 Mazda 1.25, 1.4, 1.6 Zetec, Duratec engines.

Product code: W0406

Magnetic flywheel puller for Suzuki, M50x1,5

Magnetic flywheel puller for Suzuki, M50x1,5.

Product code: W0429

Shaft pulley lock for Ford 1.6 EcoBoost

Shaft pulley locking tool for Ford Fiesta, Fusion, Focus, C-Max, S-Max, Galaxy, Kuga, Turneo Connect, Grand Tourneo Connect, Transit Connect 1.6 EcoBoost engines.

Product code: W0459

Axle mounting bolts, adapters for Volkswagen and Audi 2.0 - 4.2 liter engines, 3pcs

Bolts, adapters for fixing and stabilizing the shaft.

Product code: W0492

Lock timing Opel 1.6 SIDI Pertol

Product code: W0533

Cap rear hub Ford Transit after 2014

This special installation tool is specially designed for Ford Transit vehicles for rear wheel nuts. The tool fits directly into the hub, allowing for accurate centering and locking in the hub.

Product code: W0574

Variable timing cam lock for Volvo V40, S40

VCT lock for Volvo V40, S40.

Product code: W0636

Timing lock for Ford 1.8, 2.0 TDDI, TDCI

Timing lock for Ford Fiesta, Focus, C-Max, Transit Connect, Escort, Courier, Mondeo 1.8, 2.0 TDDI, TDCI.

Product code: W0665

Key variator VW, Audi 4.2, 2.5, 5.0

The Key Variator is a specialized tool designed for VW and Audi vehicles with specific engine types, including 4.2L, 2.5L, and 5.0L engines. This tool is used for setting, adjusting, and tensioning the timing chain with a camshaft adjuster (T40079).

Product code: W0675

Camshaft Gear Alignment Tool Renault 2.0; 2.3 DCI

The Camshaft Gear Alignment Tool for Renault 2.0 and 2.3 DCI engines - the ultimate solution for precision engine maintenance and repair! Designed with meticulous attention to detail, this high-quality tool is a must-have for professional mechanics and DIY enthusiasts alike. Crafted from robust materials, the Camshaft Gear Alignment Tool is built to withstand the rigors of regular use. You can trust its reliability and longevity.

Product code: W0685

Engine timing tool set for Ford

This versatile engine timing tool set is specifically designed for a wide array of Ford models, encompassing both belt and chain driven petrol and diesel engines.

Product code: MG91696

Engine timing tool set for Audi (3.0 V6 30V engines)

This comprehensive tool set is specifically designed for Audi 3.0 V6 30V engines. It includes a range of tools for setting and locking the camshaft and crankshaft, along with additional instruments for adjusting the camshaft sprocket and belt tensioner. This kit is essential to working on Audi vehicles, ensuring precise timing adjustments and maintenance.

Product code: MG91888

Engine timing tool set for Ford (1.6 TI-VCT engines)

This comprehensive engine timing tool set is specifically designed for Ford 1.6 Duratec engines with variable valve timing, including the 1.6 SCTi/Ti-VCT Ecoboost and 1.6gtdi models, as well as the newer 1.5L Ecoboost engines from 2014 onwards.

Product code: MG91684

Diesel Camshaft/Head Rebuild Kit - VAG/Porsche/AUDI T40094/T40095/T40096

This kit is allows you to overhaul the camshaft and cylinder head on VAG, Porsche or Audi common rail diesel engines. It holds the camshaft in the correct position when installing it. Equivalent to the OEM tooling required to allow the camshafts to be correctly fitted into the cylinder head. This is necessary as the cylinder heads on these engines are designed with a camshaft retaining frame that splits from the cylinder head along the centre line of the cam bearing caps.

Product code: MG04A1030

Timing tool set suitable for VW Group 1.6 - 2.0 TDI CR engines - year 2012

This Timing Tool Set is compatible with a diverse lineup of VW Group vehicles, ensuring it covers a broad spectrum of popular models.

Product code: MG04A2184

High pressure pump sprocket remover for Hyundai and KIA

High pressure pump sprocket remover and flywheel lock for Hyundai and KIA. For chain driven 1.1, 1.4, 1.5, 1.6, 1.7 CRD diesel engines.

Product code: MG04A2331

Engine timing tool kit for Vauxhall and Opel 1.6 CDTi diesel engines

Engine timing tool kit for Vauxhall and Opel 1.6 (from 2013 to 2018) CDTi EcoFlex engines. Engine codes: B16DTC, B16DTE, B16DTH, B16DTJ, B16DTL, B16DTN, B16DTR, B16DTU.

Product code: MG04A2370

Engine timing tool kit for Ford 2.2, 3.2 TDCi

Engine timing tool kit for Ford Ranger, Transit, Everest, Mazda BT 2.2, 3.2 TDCi.

Product code: MG04A2432D

Timing lock set for Ford, Volvo 1.6 GTDI, Ecoboost 1.8, 2.0 Duratec engines

The tool set is intended for adjusting the camshaft and crankshaft in Volvo and Ford 1.6, 1.8, 2.0 cars.

Product code: C01/0221

Timing tool set for Jaguar and Land Rover 2.0 GTDi

Tool set to replace the timing in Jaguar XE, XF, XJ and Land Rover Discovery Sport, Freelander, Range Rover, Evoque 2.0 GTDi. OEM codes: 303748, 3031565, 3031521, 3031595, 3031594.

Product code: C01/0234

Timing tool set for Mercedes Benz M177 and M178 V8 4.0L engines

Timing tool set for Mercedes Benz M177 and M178 BiTurbo V8 4.0L engines. OEM: 177589014000, 177589001500, 177589014000, 27158900100, 177589000900.

Product code: C01/0236

Crankshaft locks for BMW, Mini 1.6, 2.0 engines

Crankshaft lock for BMW and Mini 1.6 and 2.0 Diesel Common Rail N47 engines from 2013 and on.

Product code: C01/0245

Timing tool set for Mercedes-Benz 1.6, 2.0 M133, M270 and M274

Timing tool set for Mercedes-Benz 1.6, 2.0 M133, M270 and M274. Engine codes: 270.910 A, 274.910 B, 133.980 A, 270.920 A, 274.920 B.

Product code: C01/0246

Timing tool set for Ford 1.0 EcoBoost, 2012 and on

Timing tool set for Ford 1.0 EcoBoost, 2012 and on. OEM: 303-1661-1, 303-1661-2, 303-1661-3, 310-018, 303-1602, 303-1604, 303-1603, 303-732, 303-1054, 303-1661-1, 303-1661-2, 303-1661-3, 310-018,  303-1602, 303-1604, 303-1603, 303-732, 303-1054, 303-1605/1, 303-1605/2, 303-1606/1, 303-1606/2.

Product code: C01/0248

Timing tool for PSA 1.2 GDI Puretech

The timing tool for PSA 1.2 GDI Puretech is specifically engineered for use with PSA 1.2 GDI (Gasoline Direct Injection) Puretech engines.

Product code: JBM54288

Mercedes-Benz timing chain riveting tool set

Mercedes-Benz timing chain riveting tool set. For Mercedes Benz, Chrysler, Jeep 1.7-4.0 diesel engines.

Product code: MG04A2298

Mercedes-Benz timing tool 1.6, 2.0 W654 (2016 - 2020 >) DIESEL

This kit is suitable for various car classes, including A, B, C, CLA, CLS, E, GLB, GLC Coupe, GLE, V Class, and Vito, equipped with the 1.6 and 2.0 W654 Chain Diesel engines.

Product code: C01/0264

Exhaust camshaft locking and alignment tool

Exhaust camshaft locking and alignment tool for replacing the timing chain on cars.

Product code: C01/0271

Timing lock and tools for high pressure fuel pump Renault 2.0 D Blue dCi from 2020

This tool is designed to ensure precise timing and secure removal of the high-pressure fuel pump and to fit the unique specifications of the Renault 2.0 D Blue dCi engine, guaranteeing compatibility and optimal performance.

Product code: C01/0261

Exhaust camshaft locking and wedging tool 1.2 VTI

This tool is a comprehensive set of tools designed for specific tasks related to the exhaust camshaft locking and alignment process. This kit includes various components and tools to ensure precise and efficient work.

Product code: C01/0270

Camshaft gear locking set with key VW / Audi / Seat / Skoda : 1.0 / 1.2 / 1.4 TSI and Bluemotion Petrol

By utilizing the Camshaft Gear Locking Set with Key, you can confidently perform timing-related tasks on the specified engines. It guarantees precise immobilization and alignment of the camshaft gear, facilitating accurate timing adjustments and ensuring optimal engine performance.

Product code: C01/0272

Flywheel lock kit for Mercedes, Renault, Dacia

The kit includes the necessary tools to lock the flywheel securely in place, preventing it from rotating during procedures such as clutch replacement, flywheel removal, or timing belt replacement. This ensures precise work and prevents damage to the engine components.

Product code: JBM54289

Timing tool set for BMW, Land Rover, Opel 2.5 TDS

If you're working on BMW, Land Rover, or Opel 2.5 TDS engines, a dedicated timing tool set is crucial for efficient and successful maintenance and repairs.

Product code: W0285

Water pump locking tool for Opel 2.2 16V

This tool is designed to immobilize the water pump pulley, allowing for secure and efficient removal or installation of the water pump and associated components. To properly replace or service the water pump in an Opel 2.2 16V engine, a water pump locking tool is often necessary.

Product code: W0350

Timing tool set for Peugeot

1.0, 1.1, 1.4, 1.6, 1.8, 1.9, 2.0 and 1.6, 1.8, 2.0, 2.2 16V (Turbo, Twin cam.) petrol, 1.4, 1.5, 1.7, 1.8, 1.9, 2.1, 2.5 D,TD,TDI, 1.4, 1.6, 2.0, 2.2 HDI

Product code: MG50685

Adjustable camshaft pulley holder, length 420mm

For tensioning or loosening the belt pulleys, adjustable opening 12-150mm.

Product code: MG50673

Camshaft holding tool

Suitable for VW, Audi, Seat and Skoda 1.2, 1.4 and 1.6 (Skoda Fabia 1.9) petrol engines. For belt pulley tightening and loosening.

Product code: MG50670

Timing tool set for VAG 1.2 TFSI

This professional-grade timing tool set is specifically designed for VAG 1.2 TFSI engines manufactured from 2010 onwards, ensuring precise and secure positioning of engine timing components during maintenance or repair work.

Product code: MG50661

Timing tool set for Ford, Mazda

Camshaft and crankshaft locking tool for 1.25-2.0 diesel and petrol engines

Product code: MG50658

Timing tool set for GM, Opel, 16V 1.6 and 1.8 engines

Alfa Romeo: 159, Chevrolet: Aveo, Cruze, Orlando. Fiat: Croma, Opel: Corsa, Astra G, Astra H, Meriva A, Zafira B, Vectra C, Signum

Product code: MG50651

Timing tool set for Alfa Romeo, Fiat, Lancia

For Alfa Romeo, Fiat, Lancia 1.4, 1.6, 1.8, 2.0 engines

Product code: MG50632

Timing tool set for Alfa Romeo, Fiat, Lancia

For Alfa Romeo 1.4, 1.6, 1.8, 2.0, 3.0 4-cylinder engines. Fiat, Lancia 1.2, 1.4, 1.6, 1.8, 2.0

Product code: MG50631

Timing tool set for Renault

Timing tool set for Renault 16v engines. Laguna, Safrane, TDC 2.0, 2.5 16v 1996-2001

Product code: MG50620

Timing tool set for Ford, Volvo, Mazda

1.25, 1.4, 1.6, 2.0, 2.3, 1.6 v16, 2.0 RS, 1.6 Ti-VRC, 1.8 SCi, 2.0 ST 150, 2.0 XHR petrol, 1.8 TDdi, 1.8 TD, 1.8, 2.2, 2.2 TDCI engines. 1.6 Ti-VCT, 2.0 TDCi engines, Focus, C-Max.

Product code: MG50619

Timing tool set for VW

Timing tool set for VW, 2.5TDI PD, 4.9 D/TDI PD

Product code: MG50617

Tensioner pulley wrench for VW, Audi 32mm

The tensioner pulley wrench is specifically designed for adjusting and maintaining the tensioner in Volkswagen and Audi 2.5 TDi and SDi engines. The precision design and 32mm size ensure that the tool fits perfectly, allowing you to work quickly and efficiently.

Product code: MG50615

Timing tool set for VW, Audi, Skoda, Seat

Timing belt tensioner, upper dead centre measurer, camshaft locking tool, for VW 1.4, 1.6 FSI, 1.8 Turbo, 1.8 V16, 1.8 Cupra R petrol engines

Product code: MG50603

Timing tool set for VW, Audi, Skoda, Seat

The control mounting kit, designed for VW, Audi, Skoda and Seat vehicles, is a particularly important tool for accurate and safe assembly work. This kit allows you to accurately fix the position of the crankshaft, injector pump and V-belt tensioner for 1.2, 1.4, 1.9 and 2.0 TDI PD engines and other engine variants.

Product code: MG50365

Timing tool set for BMW, N52, N53, N54, 2.5, 3.0 engines

BMW, N51, N52, N53, N54, camshaft, flywheel locking tools, camshaft sensor setting tool, for 2.5, 3.0 6-cylinder DOHC 24V double Vanos aluminium/magnesium alloy petrol engines

Product code: MG50393

Timing tool set for VW, Audi, Skoda, Seat

Timing tool set for VW, Audi, Skoda, Seat, 2.0 FSI, TFSI 1.8 V16. 1.8 Cupra R petrol, 1.4, 1.9, 2.0 TDI PD engines

Product code: MG50392

Timing tool set for BMW, Mini, PSA

BMW Mini camshaft, flywheel locking tools, timing chain tensioner, for 1.4, 1.6 V16 petrol engines

Product code: MG50390

Timing tool set for Mercedes-Benz, Chrysler, Jeep

Flywheel and camshaft locking tool, for petrol and diesel, 2.2, 2.7 CDI engines

Product code: MG50378

Timing Tool Set for Fiat, Ford, and Lancia 1.2/1.4 8V

The Timing Tool Set for Fiat, Ford, and Lancia 1.2/1.4 8V is an essential kit designed for the precise maintenance and assembly of engine timing components. This comprehensive set is specifically tailored for professionals working on a variety of models from Fiat, Lancia, and Ford.

Product code: MG50372

Injector nozzle extractor set for Mercedes-Benz, Chrysler

Mercedes C-Class, E-Class, Sprinter (611, 612, 613) Chrysler Grand Cherokee 27crd (00'-)

Product code: MG50357

Timing tool set for VW, Audi

Crankshaft locking tool, camshaft locking tool, panel removal tool, shock absorber tool, ribbed belt tensioner, for 2.8 V30, 2.7 Turbo, 4.2 V40, 4.2, 5.2 FSI, 2.4, 2.6, 2.7, 2.8, 4.2, 6.0 petrol engines, 2.5, 2.7, 3.0 TDI, 3.0 TDI CR

Product code: MG50356

VAG injector puller set, SDI, TDI (PD)

Suitable for 1.4 SDI, TDI, 1.9D, SDI, TDI (PD), 2.0TDI (PD), 2.5 TDI, 2.5 TDI (PD), 2.8TDI (PD), 2.7 TDI, 3.0 TDI

Product code: MG50347

Timing tool set for Opel, Nissan, Dacia, Renault

The Timing Tool Set is a useful kit for the precise timing and maintenance of a variety of vehicles, including models from Opel, Nissan, Dacia, and Renault. This is tailored to especially the 2.2 and 2.5 DCI/DTI Renault engines and the 2.2 16V petrol engines from Opel.

Product code: MG50345

Timing tool set for BMW, N47, N47S

BMW, N47, N47S, camshaft, flywheel locking tools, crankshaft pulley holding tool, injection pump locking tool, for 4-cylinder straight 2.0 TD engines

Product code: MG50344

Timing tool set for Volvo

For 4-, 5- and 6-cylinder Twin Cam (except the 3.2l) engines

Product code: MG50340

Timing tool set for Fiat

The Timing Tool Set for Fiat vehicles, specifically designed for Twin Spark 1.4, 1.6, 1.8, and 2.0 16V double camshaft engines, is a comprehensive solution for professional mechanics focusing on precision timing and engine efficiency.

Product code: MG50327

Timing tool set, for BMW, N42, N46, N46T

Timing tool set for BMW, NN42, N46, N46T

Product code: MG50326

Timing tool set for Ford

For 2.0, 2.2, 2.4 TDDI, TDCI, engines with timing chain

Product code: MG50325

Timing tool set for Opel, Fiat

Camshaft, twin camshaft, flywheel locking tools, for 1.0, 1.2, 1.4, 1.6 CNG, V16, 1.8i, V16, 2.0 OPC, VXR, 2.2 petrol, 1.7 D, TD, 1.3, 1.9 D, TD, JTD, CDTi, DDIS, 2.0, 2.2 TD, TiD, TDi 2.4JTD engines

Product code: MG50321

Camshaft gear puller for Ford

Camshaft gear puller for Ford

Product code: MG50320

Timing tool set for Fiat

Timing tool set for Fiat, 1.2 1.4 1.6 1.8 16V petrol, 2.4 V10, V20 JTD, 2.0, 2.1 TD engines

Product code: MG50318

Timing tool set for VW, Audi

For 2.8 V30, 2.7 Turbo, 4.2 V40, 4.2, 5.2 FSI, 2.4, 2.6, 2.7, 2.8, 4.2, 6.0 petrol, 2.5, 2.7, 3.0 TDI, 3.0 TDI CR engines, crankshaft, camshaft locking tools

Product code: MG50316

Timing tool set for VW, Skoda, Seat

For 1.9, 2.0 TDI PD engines, plate for ribbed belt tensioner, crankshaft locking tool (for round pulley teeth), injection pump locking tool

Product code: MG50315

Timing tool set for Renault, Dacia 1.4, 1.6, 1.8, 2.0 16V

This timing tool kit is the perfect choice for a wide range of Renault and Dacia vehicles, especially those with 1.4, 1.6, 1.8, and 2.0 16V petrol engines. It's an essential aid for the precise adjustment and securing of the timing on models such as Clio, Megane, Scenic, Laguna, Espace, and Dacia Logan.

Product code: MG50314

Timing tool set for BMW, Land Rover, Opel 2.5 TD5

Timing tool set for BMW, Land Rover, Opel 2.5 TD5 diesel engines.

Product code: MG50311

Timing tool set for Opel, Suzuki

For 1.3 CDTI/DDIS chain-driven, diesel engines

Product code: MG50310A

Timing tool set for Fiat

This timing tool kit is specifically designed for a wide range of Fiat vehicles, including models like Bravo, Brava, Stilo, 500, Punto, Grande Punto, Idea, Marea, Marea Weekend, and Palio Weekend, as well as the Lancia Ypsilon, supporting 1.2 16V petrol engines. The kit is the ideal toolset for precise adjustment and securing of the engine timing system during repair and maintenance tasks.

Product code: MG50308

Timing tool set for Land Rover, Jaguar

For 2.7TD V6 engines

Product code: MG50307

Timing tool set for Ford

For 1.6 Ti-VCT, 2.0 TDCi engines, Focus, C-Max

Product code: MG50305

Timing tool set for Opel, Suzuki 1.0, 1.2, 1.4

The Timing Tool Set for Opel and Suzuki 1.0, 1.2, 1.4 petrol engines is a specialized kit designed to address the precise needs of servicing vehicles with timing chain systems.

Product code: MG50304

Timing tool set for Citroen, Peugeot

For 1.8, 2.0 petrol engines. Citroen: Xara 2.0 16V, C5 1.8, 2.0 HPI, Xara Picasso 1.8, 2.0 16V (02-05), Peugeot: 406 1.8 16V (00-04), 807 2.0 16V (02-05)

Product code: MG50302

Timing tool set for BMW, Land Rover, 2.0D 16V, 1.8, 2.0, 2.5, 3.0D

Camshaft, crankshaft locking tools, timing belt tensioner, for 4- and 6-cylinder 2.0D 16V, 1.8, 2.0, 2.5, 3.0D engines

Product code: MG50096

Timing tool set for Renault

This timing tool set is developed for Renault's double camshaft engines, specifically designed for the 1.2, 1.4, 1.6, 1.8, and 2.0 16V petrol engines, as well as the 2.2D, TD, 2.2Td, 2.2TD, 2.5D, and 2.5D, TD diesel engines. This tool is essential for accurate and safe camshaft positioning and timing adjustment during repair and maintenance work.

Product code: MG50089

Flywheel and camshaft locking pin set, universal

Flywheel and camshaft locking pin for diesel and petrol engines.

Product code: MG50088

Timing tool set for Opel, Saab

This timing tool set includes camshaft and crankshaft locking tools tailored for 1.9 CDTI/TID engines with timing belts, commonly found in Opel and Saab vehicles. The set ensures precise alignment of the camshaft and crankshaft to facilitate smooth and accurate timing belt replacement or engine repair.

Product code: MG50087

Timing tool set for Citroen, Peugeot

The Timing Lock for Citroën and Peugeot vehicles is a comprehensive tool kit that is of great help in servicing a wide range of petrol and diesel engines. This kit is specifically designed to accommodate 1.0-2.2 liter engines and covers a wide range of models and engine configurations including 16V (Turbo, Twin Cam) petrol engines and various diesel engines such as D, TD, TDI and HDI.

Product code: MG50085

Timing tool set, for VW, Seat, Skoda

This Timing Tool Set is specifically designed for use with VAG 3-cylinder 1.2 V6 and V12 petrol engines, making it useful tool for automotive technicians working on VW, Seat, and Skoda vehicles.

Product code: MG50084

Timing tool set for VW, Audi, Skoda, Seat

Timing tool set for VW group, for diesel: 1.7, 1.9 D/TD/SDI/TDI; 2.5, 3.3 TDI; 1.2, 1.4, 1.9, 2.0 PD TDI, petrol: 1.4, 1.6, 1.8, 1.8T, 2.0, 2.0 16V, 2.0FSI; 1.2 6V, 1.2 12V engines

Product code: MG50082

Timing tool set for Fiat, Opel

For 1.9, 2.4 D, TD, JTD, CDTI, 1.3 CDTi, JTD Multijet, DDiS engines

Product code: MG50080

Timing tool set VW, AUDI, VAG 1.8 and 2.0 TSI TFSI

Control mount for four-cylinder 1.8, 2.0 16V TSI, TFSI engines. For Audi, VW, Seat, Skoda models

Product code: MG04A2176

Timing tools set for 1.9 TDI VW

Special tool set for camshaft locking. Suitable for VW Golf, Bora, New Beetle, Seat Cordoba, Ibiza, Inca, Leon, Toledo (99-06) with 1.9 TDI engine. Contains 1pc locking tool and 2pcs bolt.

Product code: MG04A2202D

Opel 1.0 1.2 1.4 Turbo Engine Timing Tools Set

For Opel 1.0, 1.2 and 1.4 Twin Cam turbocharged engines. The kit is suitable for fixing the camshaft and the crankshaft position when removing and replacing the timing chain.

Product code: MG04A2193

Engine timing tool kit Opel Fiat Suzuki Ford 1.3 diesel engines

Engine timing tool set for Opel Fiat Suzuki Citroën, Ford, Peugeot 1.3 JTD, CDTi, TDCi, TD, DTE5 engines.

Product code: MG04A2173D

Timing chain and camshaft locking tool set for Mercedes engines

This timing chain and camshaft locking tool set is to be used on M271, DE18ML, E16ML, DE18LA, 4 cylinder, 2003-2005 Mercedes engines.

Product code: MG04A2121

Engine timing locking tools set for Citroën/Peugeot 1.0/1.2 VTi

A complete shim and timing lock assembly designed for use on a wide range of vehicles Citroën/Peugeot 1.0/1.2 VTi

Product code: JBM53876

Timing tool set for Renault, Nissan, Opel, Volvo

Motor petrol: 2.0 16V / 2.5 20V / 1.4 / 1.6 16V / 1.8 / 2.0 16V / 1.2 / 1.7 / 1.8 / 2.0 16V / 2.2, Motor diesel 1.9 / 2.5 / 2.8

Product code: JBM53769

Timing tool set for Opel, Suzuki 1.0, 1.2, 1.4

Timing tool set for Opel, Suzuki 1.0, 1.2, 1.4 petrol engines with timing chain.

Product code: JBM53301

Timing tool set for Ford, Jaguar, Duratorq

For 2.0, 2.2, 2.4 TDDI, TDCI, engines with timing chain

Product code: JBM53296

Engine timing tool set renault Opel 2.2/2.5 TDi DCi

Timing tool set for Opel, Nissan, Dacia, Renault. 2.2, 2.5 DCI, DTI Renault, 2.2 16V petrol engines.

Product code: JBM53292

Audi VW enging timing tool set V6 2.0/2.8/3.0 TFSI

Audi - VW enging timing tool set. For vehicles Audia A2, A3, A4, A6, A8 with motor V6 2.0/2.8/3.0 TFSI

Product code: JBM53278

Engine timing tool Audi & Škoda

Engine timing tool Audi, VW & Škoda. For vehicles Audi / VW V6 2.0 - 2.8 - 3.0T FSI , Audi Q5 2.0 - A6L 2.8 - 3.0T

Product code: JBM53276

Timing tool set, for BMW, N42, N46, N46T

Timing tool set for BMW, NN42, N46, N46T

Product code: JBM53259

Ribbed belt remover and installer tool set, universal

Ribbed belt remover and installer tool set, for Alfa Romeo, Audi, BMW, Chrysler, Fiat, Ford, Mercedes, Seat, Skoda, Smart, PSA, Volvo, VW

Product code: JBM51927

Opel 1.0, 1.2, 1.4 turbo engine timing tools set

For Opel 1.0, 1.2 and 1.4 twin cam turbocharged, chain driven, petrol engines. The kit is suitable for fixing the camshaft and the crankshaft position when removing and replacing the timing chain.

Product code: CKBA2193

Engine timing tool set for VAG 2.4 and 3.2 FSI

Professional set of locks for cars from the Volkswagen and Audi group for Audi V6, V8 and V10 with a chain for petrol engines with a capacity of 2.4, 3.2, 4.2 and 5.2 liters. It is used to check and adjust the timing.

Product code: CKBA2027

Timing lock, Audi, VW 2.7, 3.0, 4.0L engines

A professional set of locks for cars from the Volkswagen and Audi groups (VAG) with diesel engines with a capacity of 2.7, 3.0 and 4.0L.

Product code: CKB08513

Timing lock set VAG 1.2, 1.4, 1.6 FSI, 1.4 TSI

Timing lock VAG 1.2, 1.4, 1.6 FSI, 1.4 TSI. Set for checking and regulating the crankshaft.

Product code: CKB08060A

Oil filter pliers 10"

Oil filter pliers 10". For universal use.

Product code: CKB04061

Pulley holding double pin wrench set for VW, Audi 1.9 TDI PD, 1.4 TDI engines

Pulley holding double pin wrench set for VW, Audi 1.9 TDI PD, 1.4 TDI engines. 3pcs.

Product code: CKB01886

Crankshaft and camshaft locking set for VW Audi V6, V8 TDI

Crankshaft locking pin, camshaft locking device for VW, Audi, Skoda V6, V8 TDI .

Product code: CKB01654

Timing belt tensioner wrench for VW, Audi

Timing belt tensioner wrench for VW, Audi

Product code: CKB01629

Engine timing tool kit for BMW S54 engines

Specifically designed for the popular BMW M3 fitted with the chain driven 3.2 litre 6 cylinder 24-valve petrol engines. Engine code S54 (32 6S 4)

Product code: CKB01062

Bushing extractor and installer for Ford and Volvo

The tool is used to install and extract bushings and silents without disassembling the control arm. Enables the replacement of bushings in 4-wheel drive (4x4) cars.

Product code: C04/0211

Adapter for Mercedes CDI injectors

13mm claw puller for Mercedes CDI injectors.

Product code: C04/0102

Injector puller with sliding hammer for Mercedes CDI injectors

Injector puller with sliding hammer for Mercedes CDI injectors in OM611, 612 and 613 engines.

Product code: C04/0095WF

Injector puller with sliding hammer for Mercedes CDI injectors

Injector puller with sliding hammer for Mercedes CDI injectors 611, 612, 613

Product code: C04/0095

Injector puller for Fiat Ducato, Iveco Turbo Daily 2.3, 2.8, 3.0

Injector puller for Fiat Ducato, Iveco Daily, Iveco Turbo Daily 2.3, 2.8 and 3.0 (1999-).

Product code: C04/0037

Adapter set for bushings of swingarm pins for VW T4, LT, Crafter, Mercedes Sprinter

Adapter set for bushings of swingarm pins for VW T4, LT, Crafter, Mercedes Sprinter

Product code: C02/0146

Silent remover and installer press with adapters for Movano, Master, Nissan

Press with bushing sleeves for the top link of the swingarm of Opel Movano, Renault Master, Nissan Interstar. Universal press for extruding and pressing pins, metal-rubber sleeves, ball pins and many elements that are within the dimensions of the press.

Product code: C02/0145

Press for silents and bushings for VW T4, LT, Crafter and Mercedes Sprinter

The tool is used for pressing in and out the pins and silents without the disassembly of the control arm, thus saving you time and energy.

Product code: C02/0144

Bushing and silent press for Mercedes, VW, Renault, Opel, Nissan

The tool is used for pressing in and out the pins and silents without the disassembly of the control arm, thus saving you time and energy.

Product code: C02/0140

Bushing and silent puller and installer for VW, Audi, Skoda, Seat

Bush puller for mounting the front control arm rear trailing bushes on VW, Skoda, Audi, Seat.

Product code: C02/0113

Renault and Peugeot rear axle bush remover and installer

Designed for the removal, installation and alignment of rear axle bushes on Renault Laguna II and Peugeot 207.

Product code: C02/0094

Pump timing lock for Jaguar and Land Rover 2.0 diesel engines

Developed for JLR's latest 2.0L diesel engine. The kit contains all the necessary components required to lock JLR's new 2.0L "Ingenium" diesel engines into the timed position, so you can safely remove and replace the timing chain and check the engine timing.

Product code: C01/0268

Hyundai and KIA injection pump gear puller

Tool kit for professional setting, adjustment and locking of Hyundai and KIA engine timing. For 1.1, 1.4, 1.5, 1.6, 1.7 CRDi engines.

Product code: C01/0259

Timing tool for Fiat 500X and Jeep Renegade 1.0 and 1.3 petrol engines

A set of professional tools for setting, adjusting and locking the timing of the Fiat and Jeep Renegade engines (Petrol (2018-2022 and onwards).

Product code: C01/0258

Timing chain pre-tensioning tool for BMW N63, N74 engines

The tool is required when adjusting the engine timing. Attempts without this tool can lead to an incorrect setting. 

Product code: C01/0257

Crankshaft pulley locking tool for Renault, Dacia and Smart 0.9L and 1.2L engines

A bolt on a shaft pulley, designed to allow the drive of the pulley to be loosened and tightened without turning the pulley.

Product code: C01/0256

Fuel pump tool for Land Rover and Jaguar 2.0 diesel engines

The tool is used to remove the fuel pump without damaging the chain.

Product code: C01/0255

Timing tool set for Jaguar, Land Rover Evoque 2.0T

Timing tool set for Jaguar F-Pace, XE, XF (2015 onwards), Land Rover Discovery Sport, Range Rover Evoque (2015 onwards)

Product code: C01/0238

Timing lock for Citroen, Peugeot, Opel 1.2 Vti (VVT), GDI

This tool kit makes it easy to change the timing belt without having to disassemble multiple components. Allows you to determine if the belt needs to be replaced without having to disassemble the engine.

Product code: C01/0230

Engine timing tool set for Opel 1.6 CDTI Ecoflex

Engine timing tool set for Opel 1.6 CDTI Ecoflex

Product code: C01/0237

Timing lock set for Mini and BMW 1.8, 2.0, 3.0, 3.5 engines with common rail

The kit includes a camshaft lock, a flywheel locking pin and a crankshaft turning socket.

Product code: C01/0233

Crankshaft holding tool for BMW N47 and N57 2.0, 3.0 engines with chain

Crankshaft holding tool for BMW N47 and N57 diesel engines. Essential for securing the crankshaft when replacing the timing chain.

Product code: C01/0232

Engine timing kit for Hyundai, Kia 1.6 Diesel engines

Engine timing kit for Hyundai, Kia 1.6 CRDi, D4FE, D4FE (U3) Diesel engines.

Product code: C01/0231

Timing lock set for Ford 1.0 EcoBoost (Fox) LT

Ford timing lock for 1.0 Eco Boost (Fox) LT engines from 2018.

Product code: C01/0229

Timing lock for Opel engines 1.3 CDTi

A set of tools for setting, adjusting and locking the engine timing on the latest 1.3 CDTi (2015-2018) diesel engines in Opel cars.

Product code: C01/0228

Timing lock for BMW N63, N74 and S63 4.4l V8 engines

For setting the timing when changing the timing chain, repairing the cylinder head, replacing the cylinder head gasket, etc.

Product code: C01/0227

Timing lock for Mercedes 1.8, 2.1 and 2.2 M651 diesel engines

Timing lock for Mercedes 1.8, 2.1 and 2.2 M651 diesel engines.

Product code: C01/0226

Engine timing tool set for BMW, Mini (B38, B46, B48)

This engine timing tool set was specially designed for new generation BMW and Mini chain driven B38, B46 and B48 engines since 2014.

Product code: C01/0225

Crankshaft lock for BMW and Mini petrol and diesel engines (2014-)

Locks the crankshaft pulley in BMW and Mini petrol engines B38, B48, B58 and diesel engines B37, B47, B57.

Product code: C01/0224

Timing lock for BMW and Mini B37, B47, B57 1.5, 2.0, 3.0 diesel engines with chains

Timing lock for BMW and Mini B37, B47, B57 1.5, 2.0, 3.0 diesel engines with chains.

Product code: C01/0223

BMW and Mini timing lock N13, N18 1.6 pre-tensioning tool set

Timing lock set for BMW and Mini petrol engines N13,N18 timing chains.

Product code: C01/0222

Timing tool set for Jaguar and Land Rover (V8 5.0)

The timing tool set enables the set up of correct the engine timing when replacing the timing belt.

Product code: C01/0220

Jaguar and Land Rover timing tools set for JLR 2.0 Diesel AJ200 engines

Jaguar and Land Rover timing tools set for JLR 2.0 Diesel AJ200 engines. The kit contains all the essential components required to lock the new JLR 2.0L “Ingenium”.

Product code: C01/0219

Timing lock for Opel, Chevrolet 2.0d VCDi SOHC diesel belt

Timing lock for Opel, Chevrolet 2.0d VCDi SOHC diesel belt.

Product code: C01/0218

Camshaft timing tool Mercedes Benz M156 and M159 engines

Tool for adjusting the timing during chain change for Mercedes Benz 6.2L V8 engines.

Product code: C01/0217

Engine timing tool set for 1.5, 1.9, 2.2, 2.5 DCi Renault, Opel, Nissan diesel engines with chain

Engine timing tool set for 1.5, 1.9, 2.2, 2.5 DCi Renault, Opel, Nissan, Suzuki, Mitsubishi, Dacia diesel engines with chain.

Product code: C01/0215

Oil pump alignment and balance shaft tool for BMW N20 and N26 petrol engines

Specialized lock for the balancer shaft and oil pump designed for BMW N20 and N26 - 1.6 and 2.0 petrol engines.

Product code: C01/0203

Timing lock for Renault, Mercedes and Nissan petrol engines

Timing lock for Renault, Mercedes, Nissan petrol engines with turbo charge.

Product code: C01/0201

Renault, Nissan timing lock 1.6 DCI

Timing lock set for Renault, Nissan 1.6 DCI, R9M engines.

Product code: C01/0200

Timing tool for Renault, Nissan, Opel, Mercedes 1.6, 2.0, 2.3 engines

Timing tool for Renault, Nissan, Vauxhall, Opel, Mercedes-Benz 1.6, 2.0, 2.3 engines.

Product code: C01/0199

Flywheel locking tool for Ford 2.0 TDCI Ecoblue and 1.0 Ecoboost

Flywheel locking tool for Ford 2.0 TDCI Ecoblue and 1.0 Ecoboost.

Product code: C01/0198

Injection pump remover and installer tool kit for Ford 2.0D EcoBlue TDCi engines

A set of tools for removing the injection pump in Ford 2.0D EcoBlue TDCi engines. With this tool, no adjustment required for the pump after reassembly.

Product code: C01/0197

Timing lock set for Ford 2.0 TDCi EcoBlue

A set for locking the timing in Ford 2.0 TDCi EcoBlue engines for the duration of the belt change.

Product code: C01/0196

Timing lock for Ford Transit TDCI EcoBlue 2016-

Tool for dismantling the injection pump assembly in Ford 2.0 D EcoBlue TDCi (2016 and onward) engines. Using the tool, no adjustment required on the pump after reassembly.

Product code: C01/0195

Engine timing tool set for BMW 2.0D N47, N47S, N57, N57S engines

Set for setting camshafts in BMW N47, N47S, N57, N57S 2.0 diesel engines with chain drive.

Product code: C01/0194

Timing tool for Opel 1.0, 1.2, 1.4 engines

Timing tool for models Opel Adam, Ampera, Astra-J, Aveo, Corsa-D, Meriva-B, Mokka, Zafira-C Tourer with 1.0, 1.2, 1.4 engines.

Product code: C01/0192

Timing lock set for Ford, Fiat, Iveco, Citroen, Peugeot 2.2 diesel engines

Timing lock set for Ford Transit 2.2 TDCI, Fiat Ducato 2.2 JTD, Iveco 2.2 HPI, Citron Jumper 2.2 HDI, Peugeot Boxer 2.2 HDI

Product code: C01/0190

Timing lock for Opel, Saab, Chevrolet 1.0, 1.8, 2.0 engines

Opel valve timing control device for Opel, Saab, Chevrolet 1.0,1.8, 2.0 engines.

Product code: C01/0189

Timing lock for BMW, Rover diesel engines with common rail

Timing lock for BMW, Rover diesel engines with common rail.

Product code: C01/0185

Timing tool for BMW, Mini, Peugeot, Citroen 1.4 and 1.6 engines

Timing tool for BMW, Mini, Peugeot, Citroen 1.4 and 1.6 engines.

Product code: C01/0184

Timing lock for Fiat 1.1, 1.2 engines

Timing lock for Fiat 500, Panda, Grande Punto 1.1, 1.2

Product code: C01/0183

Timing lock set for Opel, Fiat 1.6, 1.4 16V and 1.8 16V Twinport

Timing lock set for Opel, Fiat, Chevrolet, Alfa Romeo 1.6, 1.4 and 1.8 16V Twinport gasoline engines.

Product code: C01/0182

Timing lock for Ford, Fiat, Citroen, Peugeot 2.2 TDCI engines

Timing lock for Ford, Fiat, Citroen, Peugeot 2.2 TDCI engines.

Product code: C01/0179

Timing lock set for VAG TDI 1.4, 1.6, 2.0 common rail engines

Timing lock set for VAG TDI 1.4, 1.6, 2.0 (common rail) for blocking the crankshaft, camshaft pulley and fuel pump.

Product code: C01/0181

Timing locking pins for Fiat 1.2, 1.4 T-Jet

Timing locking pins for Fiat, Lancia 1.2, 1.4 16V T-Jet petrol engines.

Product code: C01/0180

Timing lock set for VAG 1.4, 1.6 FSI / TFSI

Timing lock set for VAG, Skoda, Audi, Seat, VW 1.4, 1.6 FSI / TFSI

Product code: C01/0175

Timing lock for Renault, Nissan 1.2, 1.4, 1.6, 1.8, 2.0 16V and 1.5 DCI engines

Timing lock for Renault, Nissan 1.2, 1.4, 1.6 1.8, 2.0, 2.0 Turbo 16v (98-08), 1.5 dCi.

Product code: C01/0174

Timing lock for Renault, Nissan, Opel 2.0 DCi diesel engines

Timing lock for Renault, Nissan, Opel 2.0 DCi diesel engines.

Product code: C01/0173

Timing lock set for Opel, Fiat 1.9 CDTI / 1.9 JTD

Timing lock set for Opel, Fiat, Alfa Romeo, Jeep, Suzuki 1.6, 1.9, 2.0 CDTI / JTD /MultiJet

Product code: C01/0171

Camshaft and crankshaft locking pins for Renault, Nissan 1.4, 1.6 and 1.5 DCI engines

Camshaft and crankshaft locking pins for Renault, Nissan 1.4, 1.6 and 1.5 DCI engines.

Product code: C01/0139

Camshaft lock for Fiat 1.3 JTD Multijet, Opel 1.3 CDTI engines

Camshaft lock for Fiat 1.3 JTD Multijet, Opel 1.3 CDTI diesel engines (Opel Agila, Corsa, Combo, Astra, Tigra, Meriva, Fiat Panda, Idea, Doblo).

Product code: C01/0170

Timing lock for Renault, Opel, Nissan 1.5, 1.9, 2.2, 2.5 DCI

Timing lock for Renault, Opel, Nissan 1.5, 1.9, 2.2, 2.5 DCI.

Product code: C01/0167

Timing lock for VAG 1.4 - 2.0 TDI Common rail

Timing lock for VAG 1.4 - 2.0 TDI Common rail for locking the crankshaft.

Product code: C01/0163

Timing lock for VW, Audi, Seat, Skoda 2.0 FSi / TFSi

Timing lock for VW, Audi, Seat, Skoda 2.0 FSi / TFSi with Tensioner roller key and pin for 4-cylinder engines.

Product code: C01/0161

Timing lock set for Ford 1.6 Duratec Ecoboost engines

The kit includes timing belt replacement and timing adjustment tools for Ford 1.6Ti - VCT petrol engines and Duratec Ecoboost engines.

Product code: C01/0160

Timing lock for Opel, Saab, Chevrolet 2.0l / 2,4l Turbo 2008-2015

Timing locks for setting the timing and tensioning timers in the Opel, Vauxhall, Saab, Chevrolet 2.0 and 2.4 Turbo engines

Product code: C01/0148

Crankshaft lock for Renault, Nissan 1.5 DCI engines

Crankshaft lock for Renault, Nissan 1.5 DCI engines.

Product code: C01/0138

Belt pulley wrench for BMW diesel engines, 57mm

The BMW pulley wrench has a diameter of 57mm. It holds the belt pulley and the crankshaft in place.

Product code: C01/0137

Shaft locking pin for VW TSI, FSI, TFSI engines

Shaft locking pin for VW TSI, FSI, TFSI engines

Product code: C01/0090

Adapter sleeve (diameter 57mm) for belt pulley wrench for BMW diesel engines

Adapter sleeve (diameter 57mm) for belt pulley wrench for BMW diesel engines.

Product code: C01/0134

Camshaft lock for Opel 1.0 / 1.4 SIDI EcoFlex Turbo petrol engines

Camshaft lock for Opel Adam 1.0 / 1.4, Astra K, Corsa E SIDI EcoFlex Turbo petrol engines

Product code: C01/0130

Timing lock for Ford, Lincoln, Mazda 3.5l, 3.7l, 4.0l engines

The lock is used to set the camshaft accurately and to remove and install the timing chain. For Ford, Mazda and American cars 3.5L , 3.7L and 4.0L.

Product code: C01/0129

Timing tools set for BMW N20 and N26 petrol engines

Timing locking tools for blocking camshafts, variators, the flywheel and the chain tensioner.

Product code: C01/0126

Camshaft lock for Opel, Saab, Chevrolet 2.0l and 2.4l Turbo

Camshaft lock for Opel, Saab, Chevrolet 2.0l and 2.4l Turbo (2008-2015)

Product code: C01/0125

Timing lock for Skoda, Audi, VW, Seat 1.4, 1.6

Timing lock for Skoda, Audi, VW, Seat 1.4, 1.6 (FSI / 16V)

Product code: C01/0118

Timing locking pins for Renault, Nissan, Opel 1.5, 1.9, 2.2, 2.5 DCI

Timing locking pins for crankshaft and camshaft of Renault, Nissan, Opel 1.5, 1.9, 2.2, 2.5 DCI engines

Product code: C01/0117

Timing lock set for Renault 1.4, 1.6, 1.8, 2.0 16V and 1.5 DCI engines

Timing lock set for Renault 1.4, 1.6, 1.8, 2.0 16V and 1.5 DCI engines.

Product code: C01/0116

Camshaft, crankshaft and chain locking tool for BMW, Mini 1.4 and 1.6 16V

Camshaft, crankshaft and chain locking tool for BMW, Mini with 1.4 and 1.6 16V engines.

Product code: C01/0115

Camshaft lock for Volvo 2.5 Turbo petrol engines

Camshaft lock for Volvo and Ford 2.5 Turbo petrol engines. (S40, S60, S80, V50, V70, C70, XC70, XC90, Ford Focus, S-Max, Galaxy, Mondeo).

Product code: C01/0114

Camshaft setting tool for VW, Audi and Porsche engines

Camshaft setting tool for VW, Audi 1.6, 2.0, 2.7, 3.0, 4.0, 4.2 TDI Common Rail and Porsche 3.0 TDi

Product code: C01/0111

Injection pump sprocket lock for BMW, Mini engines N47 N57 2.0

Injection pump sprocket lock for BMW and Mini N47 2.0 D20 CU20. BMW N47 / N47S injection pump bushing to maintain gear position during disassembly of the BMW diesel pump.

Product code: C01/0099

Timing lock for VW, Audi, Seat 1.9 TDI / SDI

Timing, camshaft and crankshaft lock for 1.9 TDI / SDI engines with a vacuum pump on the camshaft.

Product code: C01/0092

Timing lock for VW, Audi, Seat 1,9 TDI / SDI

Timing, camshaft and crankshaft lock for 1.9 TDI / SDI engines with a vacuum pump on the camshaft.

Product code: C01/0091

Camshafts and crankshaft locking tool for VW 1.4 / 1.6 FSI, TFSI engines

Camshaft and crankshaft locking tool for VW 1.4 / 1.6 FSI, TFSI engines. 1.4 and 1.6 FSI Twin Cam (03-11) - engines with a timing chain.

Product code: C01/0089

Timing lock for BMW M52, M54, M56, M52TU engines

Timing lock for BMW M52, M54, M56, M52TU engines with Vanos system.

Product code: C01/0051

Camshaft timing lock for VW 1.4 and 1.6 FSI, TFSI engines

Camshaft timing lock for Audi, VW, Seat, Skoda 1.4 and 1.6 FSI, TFSI engines with a timing chain.

Product code: C01/0088

Adapter for setting variable camshaft unit Vanos BMW M62 and Range Rover Land Rover

Adapter for setting variable camshaft unit Vanos on BMW M62 and Range Rover Land Rover 4.4 V8 engines

Product code: C01/0085

Camshaft lock for Audi, VW engines 2.4 2.8 30V 2.7 Turbo

Camshaft lock for Audi, VW engines 2.4 2.8 30V 2.7 Turbo

Product code: C01/0082

Crankshaft lock for Audi 3.0 V6

Locking pin for crankshaft of Audi 3.0 V6 petrol engines

Product code: C01/0081

Timing lock for Ford, Land Rover 2.0L Ecoboost engines

Timing lock for Ford, Land Rover 2.0L Ecoboost engines. For engine timing regulation.

Product code: C01/0079

Timing tool for BMW 1.8 and 2.0 N42, N46 engines with Valvetronic

Timing tool for BMW 1.8 and 2.0 N42, N46 engines with Valvetronic.

Product code: C01/0078

Timing lock for crankshaft and balancing shafts for BMW 2.0 and 3.0 engines

Timing lock for crankshaft and balancing shafts for BMW 2.0 and 3.0 engines N47, N47S.

Product code: C01/0077

Timing lock BMW, Mini N47 and N57 1.6 - 3.0 engines

BMW, Mini timing lock for N47, N47S, N57S and N57 1.6, 1.8, 2.0, 2.3, 2.5, 3.0 diesel engines.

Product code: C01/0076

Timing lock for BMW, Mini N47 and N57 1.6, 2.0, 3.0 engines

Timing lock for BMW, Mini N47 and N57 1.6, 2.0, 3.0 engines.

Product code: C01/0075

Engine timing lock for Ford 2.0 and 2.4 diesel engines

Engine timing lock for Ford 2.0 and 2.4 diesel engines.

Product code: C01/0074

Timing lock for BMW chain pulley 2.5 and 3.0 engines N53, N54

Timing lock for BMW chain pulley 2.5 and 3.0 engines N53, N54.

Product code: C01/0073

Timing lock for BMW 2.5 and 3.0 N51, N52, N52K N55 engines with chains

For N51, N52, N52K with Valvetronic and N55. Covers 2006 and newer Series 1, 3 and 5 models, (N52) 3.0L (Non-Turbo), (N54) 3.0L Twin Turbo engines.

Product code: C01/0072

Timing lock for BMW 2.5 and 3.0 engines N54, N53

Timing lock for BMW 2.5 and 3.0. For N53 and N54 engines with direct injection.

Product code: C01/0071

Timing lock for BMW 2.5 and 3.0 engines N51, N52, N52K, N55

Application: N51, N52, N52K with Valvetronic and N55.

Product code: C01/0070

Timing lock for BMW engines M52, M54, M56, M52TU

Lock for setting the BMW M52, M54, M56, M52TU timing differentials in Vanos systems.

Product code: C01/0068

BMW 2.0, 2.2, 2.5, 2.8, 3.0 M52, M54, M56 double Vanos timing lock, for camshafts and chain

BMW 2.0, 2.2, 2.5, 2.8, 3.0 M52, M54, M56 double Vanos timing lock, for camshafts and chain

Product code: C01/0067

Timing lock for BMW M40, M42, M43, M44, M50, M52, M54 engines

Timing lock for BMW M40, M42, M43, M44, M50, M52, M54 engines

Product code: C01/0066

Timing lock for BMW M43, M70, M73 engines with timing chain

Timing lock for BMW M43, M70, M73 engines with timing chain.

Product code: C01/0050

Flywheel locking tool for Ford diesel, petrol and Ecoboost engines

Four interchangeable crankshaft locking adapters required for replacing and repairing the crankshaft pulley and replacing the Ford timing belt - for gasoline, diesel engines and Ecoboost 1.0.

Product code: C01/0063

Timing lock for Ford, Peugeot, Citroen, Land Rover, Volvo 2.0 and 2.2 engines

Timing lock for Ford, Peugeot, Citroen, Land Rover, Volvo 2.0 and 2.2 engines.

Product code: C01/0062

Timing lock for Ford, Mazda 1.8 and 2.5 diesel, 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V petrol engines

Timing lock for Ford, Mazda 1.8 and 2.5 diesel, 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V petrol engines

Product code: C01/0061

Timing locks for BMW M60 and M62 3.0, 3.5, 4.0, 4.4, 4.6 engines

Applicable for engines: M60 - 730i, 740i (94-96), M62 - 535i, 540i (96-00), 735i, 740i (96-02), 840i (93-99), X5 4, 4.6 (99-03).

Product code: C01/0060

Timing lock set for BMW M60 and M62 3.0, 3.5, 4.0, 4.4, 4.6 engines

Timing lock set for BMW M60 and M62 3.0, 3.5, 4.0, 4.4, 4.6 engines.

Product code: C01/0059

Timing lock for Opel, Suzuki 1.0 12V, 1.2 and 1.4 16V petrol engines

Timing lock for Opel, Suzuki 1.0 12V, 1.2 and 1.4 16V petrol engines with timing chain.

Product code: C01/0056

Timing lock for Ford 2.0l Ecoboost engine

Timing lock for Ford 2.0l Ecoboost engines with direct injection and with chain variable timing.

Product code: C01/0055

Timing lock for Opel and Chevrolet 1.0, 1.2, 1.4

For chain driven petrol engines: 1.0, 1.2, 1.4 liters (2010-).

Product code: C01/0054

Timing lock for BMW M42, M44, M50, M52, M54, M60, M62 engines

Timing lock for BMW M42, M44, M50, M52, M54, M60, M62 engines.

Product code: C01/0053

BMW timing locks for engines M42, M44, M50, M52, M54

BMW timing locks - M42, M44, M50, M52, M54.

Product code: C01/0052

Timing lock for BMW M43, M70, M73 engines with timing chain

Timing lock for BMW M43, M70, M73 engines with timing chain.

Product code: C01/0049

Timing lock for BMW V8 and V12 engines with timing chain

Timing lock for BMW V8 and V12, N62 and N73 3.6, 4.0, 4.4, 4.8, 6.0 engines with timing chain.

Product code: C01/0047

Timing lock for Ford 1.8 Duratec, Mazda 2.0

Timing lock for Ford 1.8 Duratec - SCI, Mazda 2.0, 2.3 TURBO with timing chain. Flywheel lock.

Product code: C01/0046

Timing lock for Ford 1.8 SCI Duratec, Mazda 2.0, 2.3 Turbo with timing chain

Timing lock for Ford 1.8 SCI Duratec, Mazda 2.0, 2.3 Turbo with timing chain.

Product code: C01/0045

Flywheel locking tool for Ford 1.8 TDi / TDdi / TDCi, 2.0 TDCi, 1.6 Ti-VCT engines

Flywheel locking tool set for Ford. The lock is needed for replacing the crankshaft pulley and timing belt. The set can be used petrol and diesel engines.

Product code: C01/0044

Engine timing lock for Ford 1.0 and 1.1 Ecoboost

Engine timing lock for Ford 1.0 and 1.1 Ecoboost

Product code: C01/0043

Timing lock set for BMW M40, M42, M43, M44, M50, M52, M54 engines

Timing lock set for BMW M40, M42, M43, M44, M50, M52, M54 engines.

Product code: C01/0042

Crankshaft locking pin VW, Audi, Skoda 2.5 TDI V6 Diesel

Crankshaft locking pin VW (Passat, Phaeton, Touareg), Audi (A4, A6, S6, A8, S8), Skoda (Superb) 2.5 TDI V6 Diesel

Product code: C01/0040

Camshaft lock for BMW M60, M62 engines

Camshaft lock for BMW M60, M62, 730i, 740i, 535i, 540i, 735i, 740i, 840i, X5 engines.

Product code: C01/0039

Timing lock set for BMW 2.0 - 3.0 petrol engines

Timing lock set for BMW 2.0, 2.2, 2.3, 2.5, 2.8, 3.0 petrol engines.

Product code: C01/0034

Camshaft lock for BMW M52 M54 M56 M52TU engines

Camshaft lock for BMW M52 M54 M56 M52TU engines.

Product code: C01/0033

Timing lock set for Opel 1.2, 1.4 petrol engines (2010-)

Timing lock set for Opel 1.2, 1.4 petrol engines (2010-). Astra J, Meriva-B.

Product code: C01/0032

Locking pin for VAG injection pump

Locking pin for VW, Audi, Skoda, Seat, Ford injection pumps.

Product code: C01/0031

Timing tool set for BMW 1.8 and 2.0 N42, N46, N46T petrol engines

Timing tool set for disassembly and assembly of the intake camshaft of BMW 1.8 and 2.0 N42, N46, N46T Valvetronic petrol engines.

Product code: C01/0030

Timing lock set for Opel 1.0, 1.2, 1.4 petrol engines with timing chain

Timing lock set for Opel and Chevrolet 1.0, 1.2, 1.4 petrol engines with timing chain (2010-).

Product code: C01/0028

Camshaft lock for Opel 1.0 petrol engines with timing chain

Camshaft lock for Opel and Chevrolet 1.0 petrol engines with timing chain (2010-).

Product code: C01/0026

Timing lock for Opel 1.4

Timing lock for camshaft and chain sprocket on Opel 1.4 petrol engines (2010-)

Product code: C01/0025

Timing lock for BMW 1.6 N43, B16, B20 engines

Timing lock for BMW 1.6 N43, B16, B20 engines.

Product code: C01/0024

Timing lock for BMW 2.5 and 3.0 N51, N52, N52K, N53, N54 engines

Timing lock for BMW 2.5 and 3.0 N51, N52, N52K engines with Valvetronic and N53, N54 engines with direct injection.

Product code: C01/0023W

Timing lock for BMW 2.5 and 3.0 N51, N52, N52K, N53, N54 engines

Timing lock for BMW 2.5 and 3.0 N51, N52, N52K engines with Valvetronic and N53, N54 engines with direct injection.

Product code: C01/0023

Camshaft lock for VW 2.5 TDI 5-cylinder diesel engines

Camshaft lock for VW, Audi 2.5 TDI 5-cylinder diesel engines.

Product code: C01/0020

Timing locks for Ford, Citroen, Peugeot, Volvo

Timing locks for Ford Duratorq, Citroen, Peugeot, Volvo 1.4, 1.6, 2.0, 2.4 engines.

Product code: C01/0019

Timing locks for Ford, Citroen, Peugeot, Volvo engines

Timing locks for Ford Duratorq, Citroen, Peugeot, Volvo 1.4, 1.6, 2.0, 2.4 engines.

Product code: C01/0018

Engine timing lock set for Ford, Mazda, Peugeot, Citroen 1.4 and 1.6 diesel

Engine timing lock set for Ford, Mazda, Peugeot, Citroen 1.4 and 1.6 diesel.

Product code: C01/0017

Timing lock for Citroen and Peugeot 1.8, 2.0

Timing lock for Citroen and Peugeot 1.8, 2.0 16V engines.

Product code: C01/0016

Timing lock set for Citroen, Peugeot, Fiat, Iveco, Renault, Opel

Timing lock set for Citroen, Peugeot, Fiat, Iveco, Renault, Opel 2.5, 2.8 diesel engines.

Product code: C01/0015

Timing locks for Ford, Mazda, Volvo 1.4, 1.6, 2.0 16V

Timing locks for Ford, Mazda, Volvo 1.4, 1.6, 2.0 16V.

Product code: C01/0014

Timing lock for BMW 1.8 and 2.0, N42, N46, N46T Valvetronic petrol engines

Timing lock for BMW 1.8 and 2.0, N42, N46, N46T Valvetronic petrol engines.

Product code: C01/0012

Camshaft lock for BMW engines M52, M54, M56

Camshaft lock for BMW Vanos engines M52, M54, M56. Tools for setting variators, cylinders, chain, main chain tension and the chain tensioner lock. 

Product code: C01/0010

Timing locks for Ford, Mazda, Volvo, diesel and petrol engines

Timing locks for Ford, Mazda, Volvo 1.8 / 2.5 diesel, 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V petrol engines

Product code: C01/0009

Timing lock for Citroen, Peugeot 1.8, 2.0, 2.2

Timing lock for Citroen, Peugeot 1.8, 2.0, 2.2

Product code: C01/0006

Camshaft lock for Fiat, Lancia 1.2 8V Evo

Camshaft lock for Fiat, Lancia 1.2 8V Evo.

Product code: C01/0005

Crankshaft lock for Ford 1.8 / 2.0 TDDI TDCI

Crankshaft lock for Ford 1.8 / 2.0 TDDI TDCI

Product code: C01/0004

Cam lock set for Fiat Ducato 2.3, 3.0 JTD Iveco, Peugeot, Citroen

Cam lock set Fiat Ducato 2.3, 3.0 JTD Iveco, Peugeot, Citroen. Pins and bolts for locking and blocking the crankshaft, camshafts.

Product code: C01/0003

Timing lock set for Ford, Mazda, Volvo 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V

Timing lock set for Ford, Mazda, Volvo 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V. Locking pin for the shaft and two camshafts and pins for blocking the crankshaft.

Product code: C01/0002

Camshaft locking bar for Ford 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V engines

Camshaft locking bar for Ford 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V engines

Product code: C01/0001

Timing tool set, Fiat 1.6 16V

Timing tool set for Fiat 1.6 16V - Brava, Bravo, Doblo, Stilo, Siena, Multipla, Cargo, Marea (1995-2007) petrol engines with belt.

Product code: W0008

Timing tool set, Fiat 1.6 16V with belt tensioner

Timing tool set, Fiat 1.6 16V with belt tensioner. Fiat: Brava/Bravo, Doblo/Cargo, Marea/Weekend, Multipla, Palio Weekend, Siena, Stilo, Lancia: Delta, Lybra.

Product code: W0009

Timing lock set for Renault, Nissan, Opel and Dacia

Timing lock Renault 1.4, 1.6, 1.8, 2.0 16V dCI gasoline enginesand 1.5 diesel engines.

Product code: W0011

Timing tool set, VW, Audi 2.5 Tdi – 5-cylinder

This Timing Tool Set is designed exclusively for the Diesel 2.5 TDI 5-cylinder engines found in select Volkswagen and Audi vehicles.

Product code: W0014

Timing tool set for VW, Audi, Skoda 2.4 - 2.8, 3.7, 4.2 engines

Timing tool set for VW, Audi, Skoda 2.4, 2.5, 2.6, 2.7, 2.8, 3.7, 4.2 V6, V8 diesel and petrol engines.

Product code: W0019

Timing tool set for Fiat, Lancia 1.2 1.4 16V

Timing tool set for Fiat, Lancia 1.2 1.4 16V. Engine codes: 176 B9.000, 182 B2.000, 188 A5.000.

Product code: W0022

Timing tool set for Ford, Mazda 16V Zetec motors

Timing tool set for Ford, Mazda 16V Zetec motors

Product code: W0023

Timing tool set for Fiat Multijet and Opel CDTI engines

Timing tool set 1.3 CDTI/JTD (Fiat Multijet, Opel CDTI).

Product code: W0025

Timing tool set for 1.4, 1.6 FSI VW, Audi, Skoda

Timing tool set for 1.4, 1.6 FSI VW, Audi, Skoda.

Product code: W0026

Timing tool set, VW, Seat, Skoda 1.2 6V and 12V

A set of timing locks for 3-cylinder VW Seat Skoda 1.2 6/12V (chain driven) engines.

Product code: W0031

Timing tool set for Opel 1.0, 1.2 DOHC twin cam engines

The kit allows to set and lock the camshafts In Opel Agila, Astra-G, Corsa-B, Meriva 1.0, 1.2 12V twin cam ecotec engines.

Product code: W0030

Timing tool set for Audi, Seat, Skoda, VW 1.4, 1.6 16V petrol engines

It is used to set the correct position of the camshafts on 1.4 and 1.6 petrol engines with double camshafts.

Product code: W0032

Timing tool set, Alfa Romeo, Opel, Fiat, Saab 1.6, 1.9, 2.0, 2.4 JTD CDTI engines

Timing tool set, Alfa Romeo, Opel, Fiat, Saab 1.6, 1.9, 2.0, 2.4 JTD CDTI engines.

Product code: W0034

Timing tool set for Alfa, Fiat, Opel 1.7, 1.9, 2.0 TD/JTD, 2.4 JTD

Timing tool set for Alfa Romeo, Fiat, Opel, Saab, Lancia 1.7, 1.9, 2.0 TD/JTD, 2.4 JTD

Product code: W0035

Camshaft lock for VW, Audi, Seat, Skoda 1.9 TDI SDI

Camshaft lock for VW, Audi, Seat, Skoda 1.9 TDI SDI.

Product code: W0036

Timing tool set, Renault, Opel, Nissan DCI 1.5, 1.9, 2.2, 2.5 DCI

Timing tool set, Renault, Opel, Nissan DCI 1.5, 1.9, 2.2, 2.5 DCI common rail diesel engines.

Product code: W0038

Tool for setting the upper dead point of the piston Fiat, Alfa, Lancia

Tool for setting the upper dead point of the piston Fiat, Alfa, Lancia

Product code: W0041

Timing tool set, Fiat Ducato, Iveco Daily 2.3 and 3.0 JTD

Timing tool set for Fiat Ducato, Iveco Daily 2.3 and 3.0 JTD diesel engines.

Product code: W0042

Timing tool set, VW, Audi, Seat, Skoda 1.9 TDI/SDI

Timing tool set, VW, Audi, Ford, Seat, Skoda 4-cyl. diesel engines 1.9 SDI, TDI.

Product code: W0043

Timing tool set, Fiat and Iveco 2.3, 3.0 JTD

Timing tool set for Fiat and Iveco 2.3, 3.0 JTD engines.

Product code: W0078

Sleeve puller for Mercedes rear suspension arm

The tool allows you to remove and install the rear axle sleeves quickly and safely and without removing the suspension arm and wheel hub.

Product code: W0080

Belt pulley wrench for BMW diesel engines

Belt pulley wrench for BMW diesel, E87, E46, E60, E61, E90, E91.

Product code: W0082

Wrench for shaft belt pulley unscrewing, VW, Audi, Volvo

A special tool that can be used to unscrew the axle disc for VW, Audi and Volvo vehicles.

Product code: W0085

Camshaft locking tool VW, Audi, Seat, Skoda 1,2; 1,4; 1,9 TDI

This camshaft locking tool allows for secure immobilization of the camshafts during timing belt replacement or other engine maintenance procedures.

Product code: W0131

Timing tool set, Opel, SAAB 2.0 and 2.2 DTI with timing chain

Timing tool set, Opel, SAAB 2.0 and 2.2 DTI with timing chain

Product code: W0103

Timing tool set Citroen, Peugeot, Fiat, Iveco, Renault, Opel

Timing tool set, Citroen, Peugeot, Fiat, Iveco, Renault, Opel. 2.5 and 2.8 diesel, TDI, D, HDI, JTD.

Product code: W0117

Camshaft locking tool Fiat 1.2 8V EVO

This specialised tool is specifically designed for locking the camshaft of Fiat 1.2 8V EVO vehicles. Its precise construction and durable materials guarantee long life and professional workmanship.

Product code: W0121

Camshaft locking tool for Fiat, Lancia, Ford 1.2 8V, 1.4 8V engines

Camshaft locking tool for Fiat, Lancia, Ford 1.2 8V, 1.4 8V petrol engines

Product code: W0124

Camshaft locking tool BMW Common Rail 2.0 d, 3.0d (TU)

Camshaft locking tool BMW Common Rail 2.0 d, 3.0d (TU) with rack and pinion drive wheels.

Product code: W0126

VCT alignment tool for Ford 1.6 Ti-VCT Focus, C-Max

VCT alignment tool for Ford 1.6 Ti-VCT Focus, C-Max. Engine code: HXDA. OEM: 303-1097.

Product code: W0127

Timing tool set Ford 1.6, 1.8, 2.5 D and TD

Timing tool set Ford 1.6, 1.8, 2.5 D and TD

Product code: W0128

Camshaft locking tool VAG, VW, Ford 2.3, 2.8, 2.9 (1991-2005), steel

Camshaft locking tool VAG, VW, Ford 2.3, 2.8, 2.9 (1991-2005) chain driven engines.

Product code: W0130

Wheel lock adapter for Fiat 1.4 FIRE timing EVO2 (to replace the belt)

Timing lock adapter for timing belt replacement, FIAT 1.4 Fire EVO2. The adapter is used when the timing belt is replaced without adjusting the camshaft.

Product code: W0138

Variator wrench - variable camshaft valve timing unit Alfa Romeo, Fiat

Variator wrench - variable camshaft valve timing unit Alfa Romeo, Fiat. Applications: Alfa Romeo and Fiat; Twin Cam Engines with VVC Variator

Product code: W0140

Flywheel locking tool set Ford Mazda Volvo

Flywheel locking tool set Ford Mazda Volvo petrol engines (1991-2010), 1.4 / 1.6 / 1.7 / 1.8 / 2.0 16V

Product code: W0148

Timing tool set Renault Laguna, Megane II 2.0 IDE F5R

Facilitates precise timing adjustments and alignments for specific Renault engines.

Product code: W0152

Timing tool set for Renault 2.0, 2.3 DCI and CDTI

Timing tool set for Renault, Nissan, Opel 2.0, 2.3 DCI and CDTI

Product code: W0153

Flywheel locking tool, Renault Laguna, Safrane, Espace 2.2 TD

Flywheel locking tool, Renault Laguna, Safrane, Espace 2.2 TD

Product code: W0179

Timing tool set Opel 2.2 16v chain engine

The Timing tool set Opel 2.2 16v chain engine is a reliable and efficient tool specially designed for Opel vehicles. This special tool helps to secure the engine controls, allowing you to work safely and accurately when servicing or replacing camshafts and valves.

Product code: W0154

Timing tool set BMW M42, M44 M50, M52, M52TU, M54, M56, S50US & S52US

This tool is essential for precise control work and camshaft fixing. The Timing Retainer is specially designed for the BMW engines listed to fit the camshafts perfectly and ensure an accurate and secure fit. This tool reliably secures the camshaft, allowing for accurate timing jobs and smooth installation.

Product code: W0159

Timing tool set Honda, petrol and diesel 1.6, 1.8, 2.0, 2.3, 3.0 engines

This timing tool set is crafted for Honda vehicles equipped with petrol and diesel engines, ranging from 1.6 to 3.0 liters. Designed with precision, it ensures a smooth and hassle-free timing belt replacement process, especially for engines integrated with a balance shaft.

Product code: W0174

Timing tool set, Ford, Mazda, Diesel 1.8 TDCi, TCI

Timing tool set, Ford, Mazda, Diesel 1.8 TDCi, TCI

Product code: W0178

Timing tool set BMW 2.0d N47 / N47S common rail, diesel

The Timing Tool Set specifically designed for BMW 2.0d N47/N47S common rail diesel engines. This comprehensive tool set is a must-have for precise timing adjustments, maintenance, and repairs on these specific engine models.

Product code: W0180

Camshaft sprocket puller Ford, Mazda 1.8 / 2.5 TDCI, TCI, TDDI

This puller is specifically designed to remove camshaft sprockets.

Product code: W0182

Timing tool set for Ford, Mazda, Volvo chain driven gasoline engines

Timing tool set Ford, Mazda 16V Zetec and Volvo V50 16V 1.8, 2.0 chain driven gasoline engines.

Product code: W0185

Timing tool set VW, Audi, Skoda, Seat, 2.0, 1.2, 1.4, 1.6, 1.9 TDI

Timing tool set for VW, Audi, Skoda, Seat, 2.0, 1.2, 1.4, 1.6, 1.9 TDI engines.

Product code: W0187

Timing tool set BMW / Rover Diesel Common Rail System

Timing tool set BMW / Rover Diesel Common Rail System

Product code: W0188

Timing tool set VW LT 2.8 TDI

Timing tool set VW LT 2.8 TDI + special wrench for the camshaft

Product code: W0189

Timing tool set VW / Audi 2.4 / 3.2 TDI / 4.2 TDI - petrol

Timing tool set VW / Audi 2.4 / 3.2 TDI / 4.2 TDI - petrol

Product code: W0198

Timing tool set VW Transporter / Touareg / Phaeton, 2.5 TDI PD

The timing tool set is a special tool developed for the Volkswagen Transporter, Touareg and Phaeton models with the 2.5 liter TDI PD (Pumpe-Düse) diesel engine.

Product code: W0199

Timing tool set VW, Audi, Seat, Skoda 2.0 TDI PD

Timing tool set VW, Audi, Seat, Skoda 2.0 TDI PD

Product code: W0200

Tensioning key Fiat / Alfa Romeo / Lancia (male)

The Fiat / Alfa Romeo / Lancia Spanner (father) is a special tool specially designed for Fiat, Alfa Romeo and Lancia vehicles. This spanner has been developed for male bolts and nuts and allows you to work safely and efficiently for vehicle maintenance and repair.

Product code: W0201

Timing tool set, Mini Cooper (06-10) 1.6 Diesel

Timing tool set, Mini Cooper (06-10) 1.6 Diesel

Product code: W0209

Tensioning key Alfa Romeo / Lancia (female)

The tension wrench specially designed for Alfa Romeo and Lancia cars is an ideal tool for its maintenance and repair. The precise design of this tool fits perfectly with specific screws and components, ensuring easy and efficient work.

Product code: W0202

Timing belt tensioner key Audi / VW

Timing belt tensioner key Audi / VW

Product code: W0210

Timing tool set VW Crafter 2.5 TDI, Transporter LT

Timing tool set VW Crafter 2.5 TDI, Transporter LT

Product code: W0211

Crankshaft key for Volvo petrol and diesel engines

Used to counter-hold the crankshaft pulley to release and tighten the centre bolt.

Product code: W0212