Timing tool set Lancia Kappa 5 cyl. 2.0 20v (Silver)
Product code: W0271
Brand: Lincos
Product description
Description
- Timing tool set
Suitable for
- Lancia Kappa 5 cyl. 2.0 20v (Silver)
Motorcodes
- VIS
Product packing
| Pack number | Dimensions | Weight |
|---|---|---|
| 1 | 17 x 18 x 6 cm | 0.5 kg |
Delivery fee
| Delivery method | Gross price |
|---|---|
| Pickup in Nagytarcsa | 0,00 € |
| Pickup in Debrecen | 0,00 € |
| DHL Worldwide Express | 67,48 € |
More products in this category
Tool to block the balance shafts BMW N40, N42, N45, N46
Product code: W0417
Lock Crankshaft VW AUDI V6 diesel; gasoline
Product code: W0418
Hydraulic body repair kit 10t
Hydraulic push and pull rams, capacity 10t, thrust 135mm
Product code: TL0010-2
Slide hammer, weight 1.5kg, M12/M16
Slide hammer, weight 1.5kg, M12/M16
Product code: W0066
Rear suspension bush tool Renault Laguna II
Rear suspension bush tool Renault Laguna II
Product code: W0047
Crankshaft locking tool for BMW N12, N14, N40, N42, N45, N46, N52
Crankshaft locking tool for BMW N12, N14, N40, N42, N45, N46, N52
Product code: W0390
Wrench for timing belt tightener, motors of VAG cars
Wrench for timing belt tightener, motors of VAG cars
Product code: W0039
Puller for double-row bearings of wheel hub
Puller for double-row bearings of wheel hub
Product code: W0037
The key to lock the crankshaft Volkswagen Audi Skoda 1.4-1.6 16V petrol
The key to lock the crankshaft Volkswagen Audi Skoda 1.4-1.6 16V petrol
Product code: W0275
Rear Suspension Bush Puller Ford Mondeo
Rear Suspension Bush Puller Ford Mondeo
Product code: W0020
Cam lock Fiat Brava / Bravo / Marea 2.0 20V - petrol (pink)
Product code: W0277
Tool for setting the oil pump Ducato, Iveco, Citroen Jumper - 2.3 Diesel CR
Product code: W0278
Fuel filter wrench Fiat, Opel - 1.3, 1.9, Iveco 2.2, 2.3, 3.0
Product code: W0279
Inertial puller for car injectors, Mercedes CDI, VW 1.9TDI and 2.5TDI
Inertial puller for car injectors, Mercedes CDI, VW 1.9TDI and 2.5TDI
Product code: W0018
Universal sliding hammer hub puller, with 15 screws
Universal sliding hammer hub puller, with 15 screws
Product code: W0002
Universal belt tensioner wrench set
Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm
Product code: MG50635B
Cam lock Renault 16V / 2.5 20V Volvo 1.6/1.8/1.9/2.0/2.2/2.3/2.4/2.5 (bar)
Product code: W0301
Camshaft lock for Land Rover / Jaguar Diesel 2.0 Tdi, 2.5 Tds, 2.7 TDV6
Camshaft lock for Land Rover / Jaguar Diesel 2.0 Tdi, 2.5 Tds, 2.7 TDV6
Product code: W0302
The key to lock the crankshaft VW / Audi / Seat / Skoda 1.8 TDI TFSI
Product code: W0303
The key to the timing belt tensioner VW, Audi bent
Product code: W0304
Adapter to pull the injectors HDI Siemens M25 x 1 (hardened)
Product code: W0393
Puller Injector HDI Siemens M25 x 1 (hardened)
Product code: W0394
Press the upper crossover pins Jeep Cherokee, Grand Cherokee, Wrangler
Product code: W0313
Puller Injectors Citroen Peugeot 1.6 HDI
Product code: W0314
Timing tool set for Renault, Dacia
For double camshaft 1.4, 1.6, 1.8, 2.0 16V engines
Product code: MG50094
Valve spring compressor tool for motorcycles and cars
Valve spring compressor tool for motorcycles, scooters and passenger cars. Adapter size 30-27.5mm, 25-23.5mm, 23-21.5mm, 19-16.5mm, 16-13.5mm.
Product code: MG50101
Valve-spring compressor tool set
High capacity valve-spring compressor tool, for passenger cars, adjustable rod and arm
Product code: MG50103A
Valve grinder, wooden
Valve grinder, wooden, with suction cups, sizes: 5/8", 13/16", 1 1/8", 1 3/8"
Product code: MG50104
Air conditioner line tool set
Air conditioner line tool set, sizes 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"
Product code: MG50129
Windshield wiper arm/battery terminal puller, capacity 25-43mm
Windshield wiper arm/battery terminal puller, clamping capacity 25-43mm
Product code: MG50151
Radiator pressure tester kit, 8 adapters
Radiator pressure and leakage tester kit, suitable for almost all car types
Product code: MG50180
Common rail flow meter set with adapters
For COMMON RAIL systems, 6 connectors per system Bosch, Siemens, Denso, Delphi.
Product code: MG50183
Petrol fuel pump pressure test kit, 0-7bar, 1/4", 3/8" adapters
For petrol fuel pump pressure testing. For injection systems (except the CIS-Jetronic, Bosch and the GM throttle valve systems).Measuring range 0-7bar(0-100psi)
Product code: MG50195
Panel removal tool set, 11pcs
Panel removal tool set, 11pcs. Material: very hard, special plastic. Suitable for working on doortrims, body line mouldings, O-rings
Product code: MG50200
Timing tool set for Opel, Suzuki 1.0, 1.2, 1.4
Timing tool set for Opel, Suzuki 1.0, 1.2, 1.4 petrol engines with timing chain
Product code: MG50304
Timing tool set for Renault, Opel, Nissan
For 1.5, 1.9, 2.2, 2.5 DCI, DT engines
Product code: MG50306
Timing tool set for Land Rover, Jaguar
For 2.7TD V6 engines
Product code: MG50307
Timing tool set for Fiat
Timing tool set for Fiat 1.2 16V petrol engines
Product code: MG50308
Timing tool set for Opel, Suzuki
For 1.3 CDTI, DDIS diesel engines with timing chain
Product code: MG50310
Timing tool set for Opel, Suzuki
For 1.3 CDTI/DDIS chain-driven, diesel engines
Product code: MG50310A
Timing tool set for BMW, Land Rover, Opel 2.5 TD5
Timing tool set for BMW, Land Rover, Opel 2.5 TD5 diesel engines.
Product code: MG50311
Timing tool set for Fiat
Timing tool set for Fiat, 1.2 1.4 1.6 1.8 16V petrol, 2.4 V10, V20 JTD, 2.0, 2.1 TD engines
Product code: MG50318
Timing tool set for Opel, Fiat
Camshaft, twin camshaft, flywheel locking tools, for 1.0, 1.2, 1.4, 1.6 CNG, V16, 1.8i, V16, 2.0 OPC, VXR, 2.2 petrol, 1.7 D, TD, 1.3, 1.9 D, TD, JTD, CDTi, DDIS, 2.0, 2.2 TD, TiD, TDi 2.4JTD engines
Product code: MG50321
Oil drain plug repair kit , M13, M15, M17, M20
Oil drain plug repair kit , M13, M15, M17, M20
Product code: MG50324
Timing tool set for Ford
For 2.0, 2.2, 2.4 TDDI, TDCI, engines with timing chain
Product code: MG50325
Timing tool set, for BMW, N42, N46, N46T
Timing tool set for BMW, NN42, N46, N46T
Product code: MG50326
Piston ring expander, 120-160mm
Piston ring expander, clamping capacity 120-160mm
Product code: MG50335C
Injector seat cutter tool set, 5 reamers
Flat and angled reamers for Mercedes-Benz CDI, Delphi, Bosch (BMW, PSA, Renault, Ford), Bosch (Mercedes-Benz CRD), Fiat, Iveco, T-handle, pilot post
Product code: MG50337
Glow plug removal set, for 8, 10mm glow plugs
For 8, 10mm glow plugs, allows for easy removal and installing, for cleaning plug tips, rethreading, removal of damaged glow plugs.
Product code: MG50339
Timing tool set for Volvo
For 4-, 5- and 6-cylinder Twin Cam (except the 3.2l) engines
Product code: MG50340
Timing tool set for Opel, Nissan, Dacia, Renault
2.2, 2.5 DCI, DTI Renault, 2.2 16V petrol engines
Product code: MG50345
VAG injector puller set, SDI, TDI (PD)
Suitable for 1.4 SDI, TDI, 1.9D, SDI, TDI (PD), 2.0TDI (PD), 2.5 TDI, 2.5 TDI (PD), 2.8TDI (PD), 2.7 TDI, 3.0 TDI
Product code: MG50347
Combined socket set for alternator, 13pcs
Combined socket set for alternator, 13pcs
Product code: MG50352
Injector removing tool set VAG FSI
Injector removing tool set VAG FSI
Product code: MG50363
Timing tool set for VW, Audi, Skoda, Seat
1.2. 1.4, 1.9, 2.0 TDI PD crankshaft pulley locking tool (for oval and round pulley teeth), injection pump locking tool, holding plate for ribbed belt tensioner
Product code: MG50365
Timing tool set for Fiat, Ford
For 1.2 and 1.4 8V petrol engines
Product code: MG50372
Timing tool set for BMW, Land Rover
Camshaft, crankshaft locking tools, timing belt tensioner, injection pump puller, chain tension setting tool, for 4- and 6-cylinder 2.0D 16V, 1.8, 2.0, 2.5, 3.0D, 5.2 TD, TDS engines
Product code: MG50374
Timing tool set for Ford
For 1.25, 1.4, 1.6, 2.0, 2.3, 1.6 v16, 2.0 RS, 1.6 Ti-VRC, 1.8 SCi, 2.0 ST 150, 2.0 XHR petrol, 1.8 TDdi, 1.8 TD, 1.8, 2.2, 2.2 TDCI engines
Product code: MG50375
Jointed glow plug socket set, 8-16mm
Jointed glow plug socket set, 3/8", length 158mm, sizes 8, 9, 10, 12, 14, 16mm
Product code: MG50377
Timing tool set for Chrysler, Jeep and LDV
For 2.5 és 2.8 CRD timing belt engines, Chrysler, Jeep and LDV.
Product code: MG50386
Timing tool set for BMW, Mini, PSA
BMW Mini camshaft, flywheel locking tools, timing chain tensioner, for 1.4, 1.6 V16 petrol engines
Product code: MG50390
Alternator tool set, 24pcs
Alternator tool set, 24pcs
Product code: MG50398
Front wheel drive kit, 55.5-91mm, axle 380mm
Sizes(d) 55.5, 59, 62, 65, 66, 71.5, 73, 78, 84, 86, 91mm, axle 380mm
Product code: MG50405
Wishbone lever tool, sliding type, lockable at 5 points
Wishbone lever tool, sliding type, lockable at 5 points
Product code: MG50417
Wheel bearing removal/installing tool set
For the VAG group, wheel hub size 72mm, Audi A2, Skoda Fabia after 2000, VW Polo, Fox after 2005, Seat Ibiza after 2002.
Product code: MG50432
Wheel Bearing tool VW
Bearing installation and removal tool for 85mm bearings. Application Volkswagen Touareg, Transporter, Multivan & T5
Product code: MG50432A
Ball joint separator tool set, replaceable heads, 20, 22, 24, 27, 30mm
Ball joint and tie rod separator tool set, capacity 20, 22, 24, 27, 30mm
Product code: MG50436
Axial joint tool, 27-42mm
Axial joint puller/installer
Product code: MG50444
Pneumatic brake fluid exchanger, 0.75l
For draining and filling in oil, bleeding, suitable for cars, motorcycles. Accurate and quick operation.
Product code: MG50445
Timing tool set for VW, Audi, Skoda, Seat
Timing belt tensioner, upper dead centre measurer, camshaft locking tool, for VW 1.4, 1.6 FSI, 1.8 Turbo, 1.8 V16, 1.8 Cupra R petrol engines
Product code: MG50603
Injection nozzle socket set
25, 27, 28, 29, 30mm Siemens, Bosch, for Peugeot and Citroen 2.0 HDI engines
Product code: MG50604
Universal bushing remover/installer set, 34-72mm, 44-82mm
Spindle: M10, M12, M14, M16, inner 34, 36, 38-70, 72mm, outer 44, 46, 48-80, 82mm
Product code: MG50605
Tensioner pulley wrench for VW, Audi 32mm
Tensioner pulley wrench for VW, Audi (32mm) 2.5 TDi, Sdi engines
Product code: MG50615
Timing tool set for VW
Timing tool set for VW, 2.5TDI PD, 4.9 D/TDI PD
Product code: MG50617
Timing tool set for VAG
For 1.6, 2.0 TDi CR, fifth generation Common Rail diesel (Blue Motion) engines.
Product code: MG50618
Timing tool set for Renault
Timing tool set for Renault 16v engines. Laguna, Safrane, TDC 2.0, 2.5 16v 1996-2001
Product code: MG50620
Oxygen sensor socket set
Sizes: 3/8" drive, 22mm, 6-point, 3/8" drive, 22mm, 6-point, dep, 1/2" drive 22mm, 12-point
Product code: MG50627
Copper washer removal tool for diesel injector
Copper washer removal tool for diesel injector, length 230mm
Product code: MG50629
Timing tool set for Alfa Romeo, Fiat, Lancia
For Alfa Romeo, Fiat, Lancia 1.4, 1.6, 1.8, 2.0 engines
Product code: MG50632
Timing tool set for Ford, Mazda
Camshaft and crankshaft locking tool for 1.25-2.0 diesel and petrol engines
Product code: MG50658
Camshaft timing tool set for BMW, N42, N46, N46T
Camshaft timing tool set for BMW, N42, N46, N46T
Product code: MG50659
Tube flaring set 3-19mm
Tube flaring set for tubes with diameters: 3, 5, 6, 8, 10, 12, 15, 16, 18, 19mm.
Product code: G02720
Hook and pick set, 9pcs
Hook and pick set for removing oil seals, o-rings and gaskets
Product code: G02708
Hook and pick set 6pcs (Lenght: 240mm)
Hook and pick set for removing seals, O-rings and gaskets.
Product code: G02706
Oil drain pan 10L
A container ideal for the recovery of oil and antifreeze liquids.
Product code: G02634
Oil funnel with built in filter
Oil funnel with built in filter and flexible hose. Dia.: 140mm
Product code: G02150
Fuel feed pipe pliers
Suitable for the removal of connectors on in-line fuel filter.
Product code: G01659
Fish tape, 30m, red
30m steel cable fish tape in plastic red case. Flat metal tape, size 3x1mm. Insertion head size 40x10x3mm.
Product code: FT100-RED
Set of hooks 4 pieces
Set of 4 hooks. Hooks have hardened chrome tips. The handle is made of high-quality non-slip material. Total length of tools - 135mm.
Product code: CKB04710
Fuel pump tool for Land Rover and Jaguar 2.0 diesel engines
The tool is used to remove the fuel pump without damaging the chain.
Product code: C01/0255
Camshaft lock for BMW M52 M54 M56 M52TU engines
Camshaft lock for BMW M52 M54 M56 M52TU engines.
Product code: C01/0033
Car mini bladed fuse set, 140pcs
Car mini bladed fuse set, 140pcs
Product code: G02825
Car non-insulated terminal connector set, 750pcs
Car non-insulated terminal connector set, 750pcs
Product code: G02828
Adapter to pull the injector Opel Fiat Alfa Romeo 1.9 JTD (hardened )
Product code: W0281
Puller for wheel hub / bearing Ford Focus II, C-Max, Volvo, Mazda 3,-puller with ABS and without ABS
Product code: W0305
Puller for wheel hub / bearing VW Polo, Seat, Skoda, Audi A2-puller with ABS and without ABS
Product code: W0306
Puller for replacement hydraulic tappets - Opel 8V
Product code: W0307
14pcs E4-E24 Torx socket set
14pcs E4-E24 Torx socket set. Use with 1/2", 3/8", 1/4" drives.
Product code: G13566
Adapters to bolts down Jeep - Cherokee, Grand Cherokee, Wrangler
Product code: W0398
Press the king pins the upper and lower Jeep - Cherokee, Grand Cherokee, Wrangler
Product code: W0401
Puller sleeve rear beam, RENAULT LAGUNA III , Renault Laguna Coupe
Product code: W0503
Tube double flaring set, 9pcs
Tube double flaring set, 9pcs for brake line tubings.
Product code: K00180
Puller to the hub / bearings VW T5
Puller to the hub / bearings VW T5
Product code: W0129
Timing chain and camshaft locking tool set for Mercedes engines
This timing chain and camshaft locking tool set is to be used on M271, DE18ML, E16ML, DE18LA, 4 cylinder, 2003-2005 Mercedes engines.
Product code: MG04A2121
Puller Injectors Renault, Opel, Nissan, Suzuki 1.9 DCI / CDTI
Product code: W0315
Press the down crossover pins Jeep Cherokee, Grand Cherokee, Wrangler
Product code: W0399
The key to block the Ford A / C compressor pulley
Product code: W0711
Adapter for removing the injector Ford Transit 2.0 Ecoblue (19.3mm) GK2Q-9K546-AC
Product code: W0708
Broken glow plug reamer ⌀8mm
Broken glow plug reamer ⌀8mm
Product code: W0698
Puller Injectors Renault Traffic , Laguna, Opel Vivaro 2.0 DCI / CDTI with chain
Product code: W0316
Lock Belt VW / Audi / Seat / Skoda 1.8 FSI / TFSI
Product code: W0317
Set for removing injectors Delphi 2.0 HDI (12mm) ( Delphi 28388960 )
Product code: W0661
Puller sleeve rear trailing arm KIA Creed I, II, Hyundai I 30 (oe sleeve 55543-2H000)
Product code: W0643
Broken glow plug reamer ⌀11mm
Broken glow plug reamer ⌀11mm
Product code: W0634
Broken glow plug reamer ⌀7mm
Broken glow plug reamer ⌀7mm
Product code: W0632
Brake caliper sockets for Audi Q5, A4, A5
Designed to loosen or tighten brake caliper bolts in Audi vehicles.
Product code: W0552
Device for mounting and dismounting the clutch Audi and VW – DSG
Product code: W0537
Puller adapter for Denso M25x0.5 Toyota and Mazda injectors
Puller adapter for Denso M25x0.5 Toyota and Mazda injectors
Product code: W0534
Short bolt M12 L 150 mm / used in sleeve pullers
Product code: W0530
Puller hub bearing the brake disc Ford Transit
Product code: W0500
Puller / Press sleeve metal - rubber arm rear longitudinal Honda Civic, CR-V, Concerto, CRX, Rover 200 (OE-sleeve 52385 SR3-000)
Product code: W0485
Puller / Adapter to pull the injector Renault 2.3 after 2012 (20mm)
Product code: W0467
Puller sleeve rear beam Mercedes S Class W220 C215 (oe numbers 220 351 11 42 221 350 01 75)
Product code: W0453
Key to rotate the crankshaft Volkswagen 2.5 TDI, Touareg, Transporter T5
Product code: W0452
Universal wheel puller injection pump Ford 1.8 TDCI
Product code: W0450
Crankshaft rear oil seal replacement tool for Iveco, Fiat 2.3
Crankshaft rear oil seal (gearbox side) replacement tool for Iveco, Fiat 2.3
Product code: W0438
Crankshaft front oil seal puller for Iveco, Fiat 2.3
Crankshaft front oil seal puller for Iveco, Fiat 2.3
Product code: W0437
Injection pump removal tool for BMW N47, N47S Common Rail engines
Pinion extractor for diesel injection pumps in BMW N47, N47S and N57 1.8d, 2.0d, 2.5d, 3.0d engines manufactured in 2007 - 2015. This extractor is compatible with new generation BMW engines that have the distribution in the back (at the flywheel).
Product code: W0423
Key viscous clutch Ford Transit 2.3 2.4 3.2 (2001 – 2006)
Product code: W0416
Puller injector adapter HDI 2.0, 1.3 CDTI – Hardened
Product code: W0409
Key clutch viscotic Volkswagen Crafter 2.5 TDI
Product code: W0404
Locking injection pump Mercedes OM 604 with a pump Lucas
Product code: W0392
Lock injection pump Renault, Volvo, Opel 1.9 D / TD (brass)
Product code: W0319
Adapter / Puller Injector Opel Renault 2.0 DCI / CDTI and others (hardened)
Product code: W0380
Puller sleeve right front beam Ford Focus II; III; C-Max; Volvo (no oe. 1326988, 4M515L021AB, 1326988, 23033, 30714550, FM-FOC5
Product code: W0370
Puller sleeve front beam Renault Laguna II / Trafic II (oe sleeves 8200000512)
Product code: W0368
Key fuel filter Mercedes CDI - 47 teeth
Product code: W0357
Press the front control arm bolts Renault Scenic II; Grand Scenic II; Megane II; Dacia Logan
Product code: W0352
lock the camshaft and water pump Fiat / Opel 2.2 16V chain
Product code: W0351
Lock camshaft BMW N43 1.6, 2.0 (B16, B20 - on the chain)
Product code: W0347
Adapter for pulling Denso injectors for Toyota 2.2 170hp engines
Adapter for pulling Denso injectors for Toyota 2.2 170hp engines
Product code: W0320
Lock (adapter; pin) timing Renault 2.0 DCi
Product code: W0344
Puller bushings rear beam Renault Laguna II set (5 adapters to org and not of original sleeves)
Product code: W0330
Puller bushings rear beam Renault Laguna II (to no of original sleeves with flat his back)
Product code: W0329
Adapters Bolt crossover top Jeep - Cherokee, Grand Cherokee, Wrangler
Product code: W0312
Bushing injection pump BMW Common-Rail 2.0d N47 / N47S (06-10)
Product code: W0282
Camshaft Lock Volkswagen Audi 2.6, 2.8 V6 / V8
Product code: W0322
Lock flywheel Peugeot Citroen 1.8, 2.0, 2.2
Product code: W0323
Key to sections of the injection pump Mercedes Benz - Diesel
Product code: W0324
Blockade camshaft Ford / Volvo 1.6 EcoBoost
Product code: W0405
Lock Flywheel Renault 1.2 / 1.6 Petrol, 1.9 D / TD
Product code: W0327
Timing Lock Ford, Mazda - Zetec - petrol - 3 Adapters
Product code: W0333
Pin to the crankshaft Ford Fiesta 1.25, 1.4, 1.6 Zetec, Duratec
Product code: W0406
Sleeve puller, Citroen C5
Sleeve puller, Citroen C5 (sleeve OE no. 352384)
Product code: W0196
Pin socket wrench arm Citroen / Peugeot 405 (hardened)
Pin socket wrench arm Citroen / Peugeot 405 (hardened)
Product code: W0194
Key locking the crankshaft Ford Mondeo, Transit 2.0 2.2 2.4 3.2 Duratorq TDCi (01-)
Product code: W0407
Crankshaft pulley puller VW / Audi 4 and 5 cylinder
Crankshaft pulley puller VW / Audi 4 and 5 cylinder
Product code: W0173
Central bolt puller upper arm VW, Audi after 2005
Central bolt puller upper arm VW, Audi after 2005
Product code: W0164
Puller sleeve floating FIAT, Opel, SAAb etc.
Puller sleeve floating, rear upper control arm FIAT, Opel, SAAb etc.
Product code: W0142
Lock the timing VW Transporter 2.4D (95-03), Volkswagen Crafter 2.5 TDi (06-09)
Product code: W0408
Key to lock the crankshaft pulley Volkswagen LT; transporter
Product code: W0410
Cam lock VW 2.5 TDI PD (Transporter T5, Touareg)
Product code: W0339
Cam lock VW 2.5 / 4.9 D / TDI PD - 5-cyl and 10-cyl
Product code: W0340
Lock (adapter; pin) timing Renault / Opel / Nissan 1.5 DCI
Product code: W0341
Lock (pin; adapter) timing Renault / Opel / Nissan 1.9 DCI
Product code: W0342
4 adapters to block the timing Renault / Opel / Nissan 1.5; 1.9; 2.0; 2.2 DCI (in box)
Product code: W0345
Puller for rear beam sleeve, BMW E39 touring
Puller for rear beam sleeve, BMW E39 touring
Product code: W0113
Adapters for press, puller for bolts, Master, Movano, Interstar
Adapters for press, puller for bolts, Renault Master, Opel Movano, Nissan Interstar
Product code: W0098
Wrench for alternator coupler, VALEO-Renault, Volvo (hardened)
Wrench for alternator coupler, VALEO-Renault, Volvo (hardened)
Product code: W0052
Slide hammer M12/16, ⌀85mm, weight 1,3 kg
Slide hammer M12/16, ⌀85mm, weight 1,3 kg
Product code: W0048
Face mill for crankshaft, VW TDI 1.9 2.5
Face mill for crankshaftshaft for VW TDI 1.9, 2.5 engines
Product code: W0017
Lock camshaft Citroen C15, Relais, Visa, Xantia, XM Xsara / Fiat Ulysee / Scudo / Ducato 1.9D / TD (94-02)
Product code: W0412
Lock camshaft BMW gasoline 1.8 / 2.0 N42 / N46 / N46T Valvetronic
Product code: W0414
Adapters for mounting and dismounting the front control arm bolts Renault Scenic II; Grand Scenic II; Megane II; Dacia Logan
Product code: W0353
Lock camshaft Chrysler 2.8L Diesel after 2007
Product code: W0355
Cam lock Citroen / Peugeot 1.4 16V "ET"
Product code: W0358
Puller for wheel hub / bearing with and without Abs - Ford Mondeo, Focus, C-Max, Mazda 3, Volvo C30 C70 S40 V50
Product code: W0359
Puller for wheel hub / bearing rear swingarm Mercedes Vito Viano 2.2 CDI after 2003
Product code: W0361
Lock injection pump Mercedes Benz Diesel OM 601, OM 602, OM 603
Product code: W0367
Puller sleeves left front beam Ford Focus II; III; C-Max; Volvo (no oe sleeves 1695011, 1355621, 1695011,23032, 30666042, FM-FOC
Product code: W0369
Puller sleeve rear beam Opel Zafira B; Astra H, Meriva B (oe sleeve OPEL 4 02 952; 54 02 637)
Product code: W0372
Lock timing Ford 1.8, Mazda 2.0 / 2.3 turbo
Product code: W0373
Tool for setting the GMP Volkswagen 2.5 TDI
Product code: W0374
Lock timing Ford Mondeo, Focus, C-Max 2.0 EcoBoost after 2010
Product code: W0375
Puller sleeve rear beam Renault Megane II; Scenic II; Grand Scenic II (oe sleeve 7701479190)
Product code: W0379
The key to rotate the crankshaft VW, Audi 2.4 / 3.2 FSI / 3.0, 4.2, 5.2 TDI Common Rail
Product code: W0381
Lock Timing BMW 2.5 / 3.0 Petrol; Engines N51, N52, N52K, N53, N54 (timing chain)
Product code: W0382
Lock Timing Opel 1.4 petrol (2010-)
Product code: W0383
The key to unscrewing the nut injector 3.0 HPI
Product code: W0384
Camshaft lock for Mercedes 2.0, 2.1, 2.2 CDI
Camshaft lock for Mercedes 2.0, 2.1, 2.2 CDI
Product code: W0386
Universal fuel pump wrench 45-190mm
Universal fuel pump wrench 45-190mm.
Product code: W0387
Set for knocking injectors Opel Renault 2.0 DCI / CDTI and others (hardened)
Product code: W0389
Key to timing belt tensioner VW, Audi, Seat, Skoda 1.2 / 1.4 TSI / TFSI (2013) (T10499)
Product code: W0419
Lock timing Citroen AX 1.0, 1.1, 1.4, BX 16, 19, BX-16 Peugeot 106, 205, 405 1.0, 1.1, 1.4, 205, 305, 309
Product code: W0420
Puller sleeve rear beam AUDI A4, A4 Avant 94-01 (only for pressing)
Product code: W0421
Puller arm sleeve Front Peugeot 406 ( oe. 352360 )
Product code: W0422
Puller sleeves rear beam / bridge Mercedes W210, W202, W203, W140 (OE 129 351 21 42)
Product code: W0424
Wheel Puller magnetic (Magneto) Suzuki M50x1,5
Product code: W0429
Shaft locking pin Volkswagen / Audi 2.0 / 2.4 / 3.2 FSI / 2.5 / 3.2 V6 TDI
Product code: W0431
Hydraulic cylinder to the pullers, press and injectors - 15 Ton
Product code: W0432
Crankshaft front oil seal puller for Iveco 3.0
Crankshaft front oil seal puller for Iveco 3.0
Product code: W0434
Key to lock the pulley Renault, Peugeot, Citroen 3.0 V6
Product code: W0435
Lock timing Renault, Peugeot, Citroen 3.0 V6 24V Petrol kpl
Product code: W0436
Set of inertia for punching injector BMW 1.8 / 2.0 N47
Product code: W0439
Adapter / puller injector BMW 1.8 / 2.0 N47
Product code: W0443
A/C clutch hub removal tool, 21mm (hardened)
Fits universally for Audi, BMW, Mercedes-Benz, Porsche, Smart, Volkswagen, Skoda, Seat, Cadillac, Chevrolet, Vauxhall, Ford, Dodge, Jeep, Alfa Romeo, Fiat, Lancia, Opel, Suzuki, Peugeot, Citroen, Renault, Mitsubishi, Toyota, Puch, Proton, Hyundai, etc. models and makes.
Product code: W0445
Key clutch disc air conditioning Denso 47,5 mm (hardened)
Product code: W0446
Key clutch disc air conditioning Denso 22 mm (hardened)
Product code: W0447
Key to regulation of the camshaft (double) VW AUDI 1.8 / 2.0 TFSI Fsi
Product code: W0449
Lock camshaft - Opel, Chevrolet, SAAB 2.8; 3.0; 3.2; 3.6
Product code: W0454
Puller injection pump Chrysler Voyager 2.5 TD
Product code: W0455
Puller injection pump Jeep Grand Cherokee 3.1 TD
Product code: W0456
The key for assembly and disassembly, and locking pulley BMW M52 / M54 / M56
Product code: W0458
Lock timing Renault, Nissan 3.0 DCi (V9X)
Product code: W0462
Lock timing Peugeot Citroen 1.0 / 1.2 VTi petrol engines
Product code: W0463
Timing lock for Renault, Nissan 1.6 DCI
Timing lock for Renault, Nissan 1.6 DCI.
Product code: W0464
Lock injection pump Rover, Land Rover, Jaguar 3.0
Product code: W0465
Lock timing Land Rover 2.5D / Td5 on a chain
Product code: W0466
Puller sleeve rear beam Front Bmw Series 5,6,7 / F 10, F11, F12, 13, F01 (33316790573, 33 31 6 775 780)
Product code: W0488
Car wheel dolly
Allows movement of vehicles wit damaged, stuck wheels by placing the dolly directly under the wheel. Loading capacity 680kg, clamping size 305mm(12").
Product code: TL2005-2
Engine Timing BMW 2.0 , 3.0D N47 / N47S / N57 Diesel (2007 - 2012)
Product code: W0491
The key to rotate the pulley shaft BMW N47 / M57
Product code: W0498
Puller sleeve back beam BMW 5 (E 60, E61) BMW 6 (E63, E64) (OE 33 31 6 770 826)
Product code: W0519
Puller sleeve back beam (middle) BMW 5 (E 60, E61) BMW 6 (E63, E64) (oem 33176770825)
Product code: W0520
Puller injectors Fiat; Citroen; Iveco 2.2 TDCI, HDI, JTD
Product code: W0556
Puller injectors Fiat; Citroen; Iveco 3.0 HPI
Product code: W0558
Puller injectors Citroen Jumper; Peugeot Boxer; Fiat 2.3 JTD HPI
Product code: W0560
Belt pulley wrench for BMW diesel engines
Belt pulley wrench for BMW diesel engines.
Product code: C01/0100
Adapter to pull the injector Bosch M17x1
Product code: W0596
Camshaft Mercedes-Benz M642, 3.0 24v V6
Product code: W0600
Timing lock for Fiat 1.1, 1.2 engines
Timing lock for Fiat 500, Panda, Grande Punto 1.1, 1.2
Product code: C01/0183
Press for bushings and silents for hydraulic cylinder 12T
Press for pins and bushings without adapters. Can be used with a hydraulic cylinder.
Product code: C02/0149
Broken glow plug reamer ⌀9mm, length 175mm
Broken glow plug reamer ⌀9mm, length 175mm
Product code: W0637
Puller / Sleeve press (candy) of the rear longitudinal control arm Jeep Compass, Patriot; Dodge Caliber
Product code: W0645
Valve stem seal pliers
For replacing valve stem seals.
Product code: MG50106
Overhead valve spring compressor
For OHV, OHC and CHV engines.
Product code: MG50109
The key to the unscrewing of the valve of the injector Siemens
Product code: W0657
Universal puller set
Universal puller set, jaw length 100, 200, 250mm
Product code: MG50131
Head gasket tester kit
Head gasket tester kit. Allows easy diagnosis and quick detection of head gasket failures.
Product code: CKBA4052
Crankshaft lock for BMW N47 1.6D and 2.0 D L (after 2013)
Product code: W0688
The key to blocking the Ford Transit air conditioning pulley
Product code: W0713
Air conditioning pulley locking tool for Ford S-Max, C-Max, Focus
Product code: W0714
Oil filter wrench for BMW, Volvo 87-88m, 16 flutes
BMW: N40, N42, N43, N45, N46, N51, N52, N53, N54, N55, N63, S63, N74. Volvo S40, S80
Product code: W0715
Fish tape, 15m, red
15m steel cable fish tape in plastic red case. Flat metal tape, size 3x1mm. Insertion head size 40x10x3mm.
Product code: FT50-RED
Bearing separator set
Bearing separator set, capacity 30-50mm, 50-75mm, 2 separators, 1 forcing screw, 4X2 extensions
Product code: MG50132
Exhaust pipe expander
Sizes: 29-44mm (1 1/8"-1 3/4"), 38-62mm (1 1/2"- 2 7/16"), 54-87mm (2 1/8"-3 7/16")
Product code: MG50076
Brake rewind tool set, 21pcs
Right- and left-hand helix bolts, suitable for almost every car type, like Citroen, Audi, Fiat, Ford, BMW, Mercedes-Benz, Toyota, Volvo, VW, Renault, Opel
Product code: MG50061
23pcs oil filter wrench set
Set of 21 sockets for unscrewing oil filters. It fits most passenger cars produced on the European, American and Asian markets.
Product code: G10402
Wishbone lever tool
Wishbone lever tool, Length: 1180mm, Tube: Ø 3.5cm, Brace distance: 50 - 45 - 40 - 35 - 30cm, Fastening support: 15 x 13cm
Product code: JBM51902
Windshield wiper puller
Windshield wiper puller, max. diameter 45mm, min. diameter 17mm, simple handling, safe mechanism, design with thin legs and brass-finished ends. Weight 0.2kg.
Product code: JBM52454
Axial joint tool, 33-42mm
Axial joint puller/installer. 1/2", clamping capacity: 33-42mm
Product code: MG50443
Vacuum/pressure test kit
Vacuum range 0-1bar, pressure 0-3bar, tank (2x120ml), hose 600mm, couplers, adapters
Product code: MG50411
Brake cylinder wind-back tool
Brake cylinder wind-back tool, for Audi, Ford, Honda, Jaguar, Mazda, Mitsubishi, Nissan, Rover, Saab, Subaru, Toyota, VW
Product code: MG50407
Pneumatic CV boot installation tool (8bar)
The CV boot installation tool is to be used solely for the stretching of flexible CV boots onto drive-shaft assemblies of automotive vehicles.
Product code: JBM52994
1/2" impact XZN bit socket set for VW brake calipers
1/2" impact XZN bit socket set for VW Transporter, LT M14 (length 43, 78mm), Golf M18 (length 43, 78mm), Sharan M16 (length 43, 78mm)
Product code: MG50385
Clutch alignment tool set, 16 cone adapters
Aligning shaft, 16 cone adapters, for Audi, Citroen, Fiat, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Toyota, VW, Volvo
Product code: MG50362
Injector puller tool set, with slide hammer
Injector puller tool set, with slide hammer. For Delphi, Bosch, Denso, Siemens injectors
Product code: MG50348
Waste oil collector with hand pump, 75l
Low profile waste oil collector, tank 75l, discharge volume 25l-80 rpm, hose length 2.5m, full size 1150x620x203mm
Product code: JOD607
Timing tool set for Fiat
For Twin Spark 1.4, 1.6, 1.8, 2.0 16V double camshaft engines
Product code: MG50327
Slide hammer, diameter 70mm, weight 0.9kg, length 300mm
Slide hammer, diameter 70mm, weight 0.9kg, length 300mm
Product code: W0060
Sleeve puller for rear suspension arm, BMW E36, Z3, E46
Sleeve puller for rear suspension arm, BMW E36, Z3, E46
Product code: W0083
Windshield removing tool set
For damage-free removal and separation of windshields and trims. Inner, outer windshield blade, steel wire, wire feeder tool, trim pad remover
Product code: MG50220
Hardened M12 nut with bearing for pullers
Hardened M12 nut with bearing for pullers
Product code: W0149
Petrol engine compression test kit, 0-20bar
Suitable for passenger cars and motorcycles, double scale gauge 0-20bar (0-290psi), adapters M10, M12, M14 (64, 94mm), M18
Product code: MG50184
Wrench for injection pumps, hexagon 13mm
Wrench for injection pumps, hex 13mm, drive diam. 12mm, 9x7mm rectangular fixing, hardened
Product code: W0234
Timing tool set Alfa Romeo 145, 146, 147, 155, 156, 1.4, 1.6 16V TS
Timing tool set Alfa Romeo 145, 146, 147, 155, 156 (1996-2008) 1.4, 1.6 16V TS
Product code: W0232
Oil drain repair cutter, Volkswagen
Oil drain repair cutter, Volkswagen
Product code: W0166
Puller arm forward bushing Renault Laguna I
Puller arm forward bushing Renault Laguna I (nr. oe 77 00 824 042)
Product code: W0171
Puller / press sleeve "candy" longitudinal link back FORD Focus
Puller / Press sleeve "candy" longitudinal link back FORD Focus (Oe: 1061670 or 98AG-5K896-AB)
Product code: W0230
Injection pump gear removal BMW, Opel, Land Rover
Injection pump gear removal BMW, Opel, Land Rover
Product code: W0229
Rear beam bushing puller BMW E32 / E34 (nr. oe 3331112670)
Rear beam bushing puller BMW E32 / E34 (nr. oe 3331112670)
Product code: W0181
Timing tool set Audi A8 3.7 / 4.2 V8 (engine ABZ, AEW, AHC)
Timing tool set Audi A8 3.7 / 4.2 V8 (engine ABZ, AEW, AHC)
Product code: W0227
Adapter for injector pulling Opel DTI - diesel
Adapter for injector pulling Opel DTI - diesel
Product code: W0226
Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot
Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot
Product code: W0195
Adapter for injector pulling Opel Vivaro 2.0 CDTI - hardened
Adapter for injector pulling Opel Vivaro 2.0 CDTI - hardened
Product code: W0225
Timing belt tensioner key, Lancia, Fiat 1.1, 1.2, 1.4
Timing belt tensioner key, Lancia, Fiat 1.1, 1.2, 1.4
Product code: W0237
Injector puller DTI Opel - Diesel common rail
Injector puller DTI Opel - Diesel common rail
Product code: W0221
Injector puller Opel Vivaro 2.0 CDTI
Injector puller Opel Vivaro 2.0 CDTI
Product code: W0220
Wrench for injector valve unscrewing, HDI,DCI,CDI etc., hex 10mm
Wrench for injector valve unscrewing, HDI,DCI,CDI etc., hex 10mm
Product code: W0213
Crankshaft key for Volvo petrol and diesel engines
Crankshaft key for Volvo petrol and diesel engines
Product code: W0212
Viscous clutch wrench Mercedes Sprinter 906 218, 318, 418, 518 CDI
Viscous clutch wrench Mercedes Sprinter 906 218, 318, 418, 518 CDI
Product code: W0239
Turbo Pressure Gauge, 1 to 3bar
It is fitted with 2m tubes within 1-3 bar. When the performance of the car falls, it is worth checking the turbo charge when it comes to heavy acceleration.
Product code: MG04A3069D
Timing tool set VW Crafter 2.5 TDI, Transporter LT
Timing tool set VW Crafter 2.5 TDI, Transporter LT
Product code: W0211
Timing belt tensioner key Audi / VW
Timing belt tensioner key Audi / VW
Product code: W0210
Wheel bearing removal/installation tool set 50-88mm
Diminishes the possibility of wheel bearing damage during removal and installation. Sizes (d) 50, 55, 60, 64, 67, 70, 72, 74, 75, 78, 82, 84, 88mm.
Product code: MG50075
Puller sleeve rear beam Opel Zafira A; Astra G; Combo; Meriva A (oe number 402644)
Product code: W0371
Puller / Press sleeve "candy" trailing arm rear FORD Focus complete
Product code: W0385
Timing tool set, Mini Cooper (06-10) 1.6 Diesel
Timing tool set, Mini Cooper (06-10) 1.6 Diesel
Product code: W0209
Mercedes oil filter wrench (M271 / M272) 14kt / 74mm
Product code: W0388
Denso injector valve socket
Denso injector valve socket
Product code: W0391
Puller sleeves (two) control arm front Volkswagen T4 ( 7D0 407 140 VW )
Product code: W0427
Puller sleeve front beam Mercedes ML W163 (oe bushings 163 330 02 75/1633300275)
Product code: W0428
Crankshaft locking tool set VW, Audi TDI Diesel 3, 4, 5, 6 cylinders
Crankshaft locking tool set VW, Audi TDI Diesel 3, 4, 5, 6 cylinders
Product code: W0207
Puller sleeve rubber front, rear sleds BMW Series 5, 6, 7 (33316775781, 33316792873)
Product code: W0444
Key clutch disc air conditioning Denso 23 mm (hardened)
Product code: W0448
Puller hub / bearing Mondeo IV; Focus II RS (FORD 1 463 833)
Product code: W0506
Injector removal set for Mercedes A Class CDI
Injector removal set for Mercedes A Class CDI
Product code: W0206
Double-row bearing puller and wheel hubs II version (BMW, Mercedes etc.)
Double-row bearing puller and wheel hubs II version (BMW, Mercedes etc.)
Product code: W0205
Key fuel filter Ford Transit 2.2 TDCI
Product code: W0625
Timing tool set Fiat Ducato 2.2 JTD
Timing tool set Fiat Ducato 2.2 JTD
Product code: W0204
Oil pressure test kit
Measuring range 0-7bar (0-100psi), 3 adapters 1/8", 1/4", 3/8"
Product code: MG50193
Tensioning key Alfa Romeo / Lancia (female)
Tensioning key Alfa Romeo / Lancia (female)
Product code: W0202
Tensioning key Fiat / Alfa Romeo / Lancia (male)
Tensioning key Fiat / Alfa Romeo / Lancia (male)
Product code: W0201
Face milling cutter for the shaft Fiat min 1.4 16V
Product code: W0699
Puller (32x1,25) To pull sprocket a chain and the sleeve damper crankshaft in the DKW SB 350, NZ 250, NZ 350, F8 other model
Product code: W426K
Timing tool set VW LT 2.8 TDI
Timing tool set VW LT 2.8 TDI + special wrench for the camshaft
Product code: W0189
Puller sleeve (only for pressing) of the rear beam Citroen / Peugeot
Puller sleeve (only for pressing) of the rear beam Citroen C4 / Peugeot 307
Product code: W0186
Wheel bolt for injection pump lock Volkswagen, Audi, Seat, Skoda
Wheel bolt for injection pump lock Volkswagen, Audi, Seat, Skoda
Product code: W0176
Sleeve puller, Golf IV, Audi A3, Skoda Octavia for the sleeve FEBI
Sleeve puller, Golf IV, Audi A3, Skoda Octavia for the sleeve FEBI
Product code: W0172
Adapter to remove the pins down on the Renault Master 2006
Adapter to remove the pins down on the Renault Master 2006
Product code: W0160
Timing tool set Renault 1.2, 1.4, 1.6 1.8, 2.0, 2.0 16v Turbo, 1.5 dCi
Timing tool set Renault 1.2, 1.4, 1.6 1.8, 2.0, 2.0 16v Turbo, 1.5 dCi
Product code: W0156
Adapter for testing fuel injection Diesel trucks
Adapter for testing fuel injection Diesel trucks MAN 2866, 2566, DB OM 401, 421, 441
Product code: W0145
Sleeve puller suspension arms, front BMW E39
Sleeve puller suspension arms, front BMW E39 - 520d, 520i, 523i, 535d, 525i, 525td, 525tds, 528i
Product code: W0057
KIT to pull the injector, 10mm hex wrench, thread adapter (W0104, W0135)
KIT to pull the injector, 10mm hex wrench, thread adapter (W0104, W0135)
Product code: W0137
Press, puller for bolts, strengthened (W0027, W0102)
Press, puller for bolts, strengthened (W0027, W0102)
Product code: W0134
Press, puller for bolts (W0027, W0102, W0116), Mercedes, VW, Opel etc.
Press, puller for bolts (W0027, W0102, W0116), Mercedes, VW, Opel etc.
Product code: W0133
Timing tool set Ford 1.6 /1.8 / 2.5 D/TD
Timing tool set Ford 1.6 /1.8 / 2.5 D/TD
Product code: W0128
Timing tool set, Volkswagen, Audi, Seat 1.9 SDI / TDI
Timing tool set, Volkswagen, Audi, Seat 1.9 SDI / TDI
Product code: W0259
Camshaft locking tool Fiat 1.2 8V EVO
Camshaft locking tool Fiat 1.2 8V EVO
Product code: W0121
Camshaft locking tool Fiat 1.2 8V
Camshaft locking tool Fiat 1.2 8V
Product code: W0120
Puller to the wiper arms - universal 50x40
Puller to the wiper arms - universal 50x40
Product code: W0119
Timing tool set, Renault, Nissan, Opel, 1.6 16V engines
Timing tool set, Renault, Nissan, Opel, 1.6 16V engines
Product code: W0260
Puller for suspension arm sleeve of wavy “curves” VW Golf III, Passat
Puller for suspension arm sleeve of wavy “curves” VW Golf III, Passat
Product code: W0010
Timing tool set Ford 1.8 SCI, Mazda 2.0 / 2.3 turbo timing chain
Timing tool set Ford 1.8 SCI, Mazda 2.0 / 2.3 turbo timing chain
Product code: W0262
Wrench for rim unscrewing, ABS Renault Maskot, Master
Wrench for rim unscrewing, ABS Renault Maskot, Master
Product code: W0095
Air conditioning clutch wrench
Air conditioning clutch wrench, 28-29mm
Product code: W0265
Timing tool set Opel Vectra C 2.8 V6 timing chain, petrol
Timing tool set Opel Vectra C 2.8 V6 timing chain, petrol
Product code: W0266
Wrench for damper pin locking/unscrewing, Ducato, Jumper, Boxer
Wrench for damper pin locking/unscrewing, Ducato, Jumper, Boxer
Product code: W0090
Service wrench for initial chamber 1/2", 60mm
Service wrench for initial chamber 1/2", 60mm
Product code: W0081
Fuel pump removal/installer tool
Fuel pump removal/installer tool, adjustable: 76-160mm
Product code: MG50644
Oil pressure tester kit, hose with quick couplers, 10 adapters
For oil pump, pressure tester, oil pressure switch testing. Hose with quick couplers, with 10 adapters
Product code: MG50188
Key to block unscrewing of the pulley Mercedes-Benz M272 / M273 engine
Product code: W0677
Wrench for unscrewing the injector nut for Volkswagen, Audi 2.0 TDI - Siemens (17mm)
Product code: W0710
The cap / wrench for loosening the hub nut Land Rover DEFENDER 1999-2016. ( nut number RFD100000)
Product code: W0642
Adjustable clutch plate spanner wrench air conditioning
Product code: W0616
Puller arm bushing rear Fiat Bravo II (No.sleeves 50700796 )
Product code: W0377
Puller / Press sleeve "candy" of the trailing arm rear Ford Mondeo MK 4 2007 -
Product code: W0364
Timing lock for Ford 1.25, 1.4, 1.6 16V engines
Timing lock for Ford 1.25, 1.4, 1.6 16V engines.
Product code: W0332
Puller sleeve rear beam (large) for BMW X5 E53, M57 etc.
Puller sleeve rear beam (large) (OE no. 33 31 1 093 662, 33 31 6 770 454) for BMW X5 E53, M57 etc.
Product code: W0251
Injection pump wrench set for Bosch, Lucas etc., 6 pcs special keys
Injection pump wrench set for Bosch, Lucas etc., 6 pcs special keys
Product code: W0235
Viscous clutch wrench Mercedes Sprinter 3.0 V6 CDI
Viscous clutch wrench Mercedes Sprinter 3.0 V6 CDI
Product code: W0228
Hot stapler plastic repair set
Hot stapler plastic repair set. Easy-to-use tool for quick and efficient repairing.
Product code: 804064
Oil filter wrench set, 15pcs
Sizes 65mm/14, 65-67/14, 68mm/14, 73mm/14, 74-76mm/15, 75-77mm/15, 74-76mm/15, 76mm/30, 80mm/15, 82mm/15, 90mm/15, 93mm/15, 93mm/36, 100mm/15
Product code: MG50037
Universal puller (screw L=100mm, hole distance 27-62mm)
Universal puller (screw L=100mm, hole distance 27-62mm)
Product code: W0136
Set of adapters for dismantling and mounting of lower bolts, IVECO
Set of adapters for dismantling and mounting of lower bolts, IVECO
Product code: W0116
Press for dismantling and mounting of lower bolts, IVECO
Press for dismantling and mounting of lower bolts, IVECO
Product code: W0115
Universal, strengthened press for bolts and sleeves of suspension
Universal, strengthened press for bolts and sleeves of suspension
Product code: W0099
Crankshaft lock for Ford 1.8 / 2.0 TDDI TDCI
Crankshaft lock for Ford 1.8 / 2.0 TDDI TDCI
Product code: C01/0004
Timing lock for BMW V8 and V12 engines with timing chain
Timing lock for BMW V8 and V12, N62 and N73 3.6, 4.0, 4.4, 4.8, 6.0 engines with timing chain.
Product code: C01/0047
BMW timing locks for engines M42, M44, M50, M52, M54
BMW timing locks - M42, M44, M50, M52, M54.
Product code: C01/0052
Timing lock for BMW chain pulley 2.5 and 3.0 engines N53, N54
Timing lock for BMW chain pulley 2.5 and 3.0 engines N53, N54.
Product code: C01/0073
Timing tool for BMW 1.8 and 2.0 N42, N46 engines with Valvetronic
Timing tool for BMW 1.8 and 2.0 N42, N46 engines with Valvetronic.
Product code: C01/0078
Timing lock for BMW M60 and M62 3.0, 3.5, 4.0, 4.4, 4.6 engines
Timing lock for BMW M60 and M62 3.0, 3.5, 4.0, 4.4, 4.6 engines.
Product code: C01/0080
Crankshaft lock for Audi 3.0 V6
Locking pin for crankshaft of Audi 3.0 V6 petrol engines
Product code: C01/0081
Shaft locking pin for VW TSI, FSI, TFSI engines
Shaft locking pin for VW TSI, FSI, TFSI engines
Product code: C01/0090
Timing lock for BMW N40, N45 engines
Timing lock for camshafts and variators for BMW N40, N45, N45T (B16) 2001-2009 engines.
Product code: C01/0096
Timing lock for Skoda, Audi, VW, Seat 1.4, 1.6
Timing lock for Skoda, Audi, VW, Seat 1.4, 1.6 (FSI / 16V)
Product code: C01/0118
Camshaft lock for Opel, Saab, Chevrolet 2.0l and 2.4l Turbo
Camshaft lock for Opel, Saab, Chevrolet 2.0l and 2.4l Turbo (2008-2015)
Product code: C01/0125
Belt pulley wrench for BMW diesel engines, 57mm
The BMW pulley wrench has a diameter of 57mm. It holds the belt pulley and the crankshaft in place.
Product code: C01/0137
Socket for removing rear axle nut in Mercedes Vario
Socket for removing rear axle nut in Mercedes Vario.
Product code: C01/0164
Timing chain pre-tensioning tool for BMW N63, N74 engines
The tool is required when adjusting the engine timing. Attempts without this tool can lead to an incorrect setting.
Product code: C01/0257
Bearing race and seal driver set. 17 pcs
This set makes it easy to insert bearing races and seals without damage to the bearing race, seals and housing. Fits most standard seals and bearing sizes.
Product code: CKB04013
Cylinder honing tool. For diameters: 51-177mm
Cylinder honing tool. For diameters: 51-177mm
Product code: CKB04138
AC and fuel line disconnect set
Set for disconnecting fuel and air-conditioning quick connectors.
Product code: CKB09042
Flaring tool kit for brake lines
For making ends of brake lines or copper, copper-nickel and thin-walled steel pipes. Adapters: 4.75, 6.35, 7.95, 9.50, 11.10, 12.70, 15.87mm
Product code: CKB09065
Overhead valve spring removal tool
Allows valve springs and valve stem oil seals to be replaced in the cylinder head. For OHV, OHC and CHV engines.
Product code: CKBA2114
Wire terminal release set 23pcs
Wire terminal release set 23pcs. For removing terminals from electrical connectors of BMW, Mercedes, VW, Audi, Jaguar, Porsche, Saab, Skoda, Ford, Renault, Citroen, Chrysler, Flat, Honda, Mazda, Mitsubishi, Toyota, Opel, Seat brand cars.
Product code: CKBD2035
Wheel aligner with automatic camera beam movement
Automatic camera beam movement synchronized with movement of the vehicle on the lift. All measurements can be done at floor level and adjustments at any convenient level. Provision for manual height adjustment also.
Product code: FOX3D-AB
Oil suction gun. Capacity: 500ml
Oil suction gun is suitable for removing or replacing oil in engines and gearboxes.
Product code: G01150
Pneumatic ATF and oil filling pump set for gearboxes, 15pcs
Pneumatic ATF and oil filling pump set for gearboxes, 15pcs. For Ford, BMW, Honda, Nissan, VW, Audi, Skoda, Porsche, Mini Cooper, Mercedes Benz, Honda, Hyundai, Kia, Nissan, Infinity, Volvo, Toyota, Lexus.
Product code: G02117
Bearing and gear puller with 3 jaws. Working range: up to 10" (254mm)
Bearing and gear puller with 3 jaws. Working range: up to 10" (254mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.
Product code: G02234
Bearing and gear puller with 3 jaws. Working range: up to 8" (203mm)
Bearing and gear puller with 3 jaws. Working range: up to 8" (203mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.
Product code: G02244
Cylinder leak-down tester
A classic device for checking the tightness of cylinders with compressed air in a compact design. Adapters: M14x1.25 (short), M18x1.5, M14x1.25 (long).
Product code: CHS-A0021
Internal bearing extractor set. Diameters: 8-58mm
Precision puller for tight-fitting, internal bearings and bushings.
Product code: G02577
Valve spring compressor and valve stem seal remover set
For dismantling valves in OHV and OHC engines, without dismantling the cylinder head. 5, 6, 7, 9, 10, 11.5 mm adapters included.
Product code: CKB04023B
Adapter set for gearbox fluid change (ATF)
Adapter set for gearbox fluid change (ATF).
Product code: G02733
Transmission oil dipstick for Mercedes-Benz
Transmission oil dipstick for Mercedes-Benz. Lenght: 1220mm
Product code: G03260
Removal tool soft grip swivel 500mm
Removal tool soft grip swivel 500mm. Polymer strap (high resistance) 540 x 20 mm. Ø 150mm. Dentated surface for optimal grip.
Product code: JBM52416
Drain plug wrench
Drain plug wrench. Square heads 8mm and 10mm. For vehicles Citroën, Renault, Peugeot.
Product code: JBM52617
Drum brake pliers
Drum brake pliers. For removing and installing return springs on drum brakes.
Product code: JBM52625
Piston ring compressor 3", 53-175mm
3" piston ring compressor. Ø 53/175mm
Product code: JBM52696
Piston ring compressor 6", 60-175mm
6" piston ring compressor. Ø 60-175mm
Product code: JBM52697
Stud remover
Stud remover, capacity 6.35-20mm.
Product code: MG50047
Injector copper ring assortment 150 pcs
150pcs injector copper ring assortment. For sealing of e.g. injectors on Common-Rail Diesel injection systems (CDI). Material: T2 copper
Product code: JBM53229
Timing tool set, for BMW, N42, N46, N46T
Timing tool set for BMW, NN42, N46, N46T
Product code: JBM53259
Fuel line disconnect plier set, 3pcs
3pcs fuel line coupling disconnect pliers
Product code: JBM53445
Anti-freeze tester
Anti-freeze tester, Measuring range: -43ºC to 131ºC
Product code: JBM53453
Fuel line pliers
Fuel line pliers for removal and replacement of the connections on the in-line fuel filter. Required when replacing the fuel filter or during engine repairs. Suitable for VW, Audi, Mercedes, Fiat, Opel/GM.
Product code: JBM53487
Universal belt tensioner wrench set
Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm
Product code: JBM52832
Valve lapping tool set for drills, 6pcs
This tool smoothens the surfaces of new valves, ensuring that they fit firmly into the cylinders. Suction cup diameters: 16, 20, 30, 35, 40mm.
Product code: JBM54033
Universal cooling system pressure test kit, 5pcs
This tool has been designed to check for leaks in the car cooling system. The four universal cone adapters fit a wide range of vehicles and cap sizes. (17-24mm, 28-31.5mm, 37-39.5mm, 47-48.5mm)
Product code: JBM54139
Non-marring hook, pick and prying tool set, 6pcs
This set allows you to remove, clean, and work on trim clips, oil seals, grommets, O-rings, air vent assemblies, tight gaps in interior automotive compartments, delicate wiring, composite electrical connectors, and other sensitive finished components.
Product code: JBM54142
Heat shrinkable solder sleeve set 100pcs
Allows an easy and quick connection of cables, soldering and sealing by placing the cables in the solder sleeve for the subsequent heat application. For wire 0.25-6.0mm2 (26-10AWG)
Product code: JBM53992
Timing tools set for 1.9 TDI VW
Special tool set for camshaft locking. Suitable for VW Golf, Bora, New Beetle, Seat Cordoba, Ibiza, Inca, Leon, Toledo (99-06) with 1.9 TDI engine. Contains 1pc locking tool and 2pcs bolt.
Product code: MG04A2202D
Injector seat milling and cleaning kit
The kit is suitable for renovating a diesel injector housing, cleaning an injector housing and bore, as well as a glow plug bore using milling cutters.
Product code: MG04A3065D
Leak tester for cylinder head gasket
CO2 Combustion leak detect. This tool is designed to check for the leaks between combustion and cooling system of water-cooled engines. With 3 adapters.
Product code: MG04A4052
Hydraulic wheel hub puller 10T
Hydraulic wheel hub puller 10T
Product code: MG04B1044B
Pneumatic brake fluid exchange kit (10 - 40psi)
This brake bleeder kit is suitable for bleeding brake and clutch systems in vehicles with an ABS system.
Product code: MG04B4023
Battery terminal cleaner
Quality stainless steel brush. Its use is quick, easy and has many comforts. Used to remove acid residues and corrosion traces that can prevent proper flow
Product code: MG04D2029
Diesel compression tester kit, with injector, glow plug adapters
For passenger cars, light trucks, for diesel engines with direct injection and combustion chambers, measuring range: 0-70 bar, hose length: 355mm
Product code: MG50181
Beam puller for timing wheels
Beam puller for timing wheels
Product code: W0033
Sleeve puller, Golf IV, Audi A3, Skoda Octavia
Sleeve puller, Golf IV, Audi A3, Skoda Octavia
Product code: W0006
Puller for belt pulleys, four-arm
Puller for belt pulleys, four-arm
Product code: W0073
Puller for belt pulleys, four-arm, 60mm
Puller for belt pulleys, four-arm, 60mm
Product code: W0089
Camber angle setting tool
Camber angle setting tool
Product code: W0183
Valve sealing install set, 6mm, 7mm, 8mm, universal
Valve sealing install set, 6mm, 7mm, 8mm, universal
Product code: W0059
Sleeve puller, rear beams, Fiat Punto
Sleeve puller, rear beams, Fiat Punto
Product code: W0058
Universal tool for brake pistons pushing – front
Universal tool for brake pistons pushing – front
Product code: W0003
Puller for suspension arm sleeve, Cinquecento,Seicento
Puller for suspension arm sleeve, Cinquecento,Seicento
Product code: W0004
Puller for plastic sleeves, Skoda Fabia, VW Polo
Puller for plastic sleeves, Skoda Fabia, VW Polo.
Product code: W0005
Timing tool set, Fiat 1,6 16V
Timing tool set for FIAT 1,6 16V - Brava, Bravo, Doblo, Stilo, Siena, Multipla, Cargo, Marea (1995-2007)
Product code: W0008
Timing tool set for Renault, Nissan, Opel, Dacia
Timing tool set for Renault, Nissan, Opel, Dacia
Product code: W0011
Universal puller for air conditioning couplers, with 4 holes
Universal puller for air conditioning couplers, with 4 holes
Product code: W0013
Timing tool set, VW, Audi 2.5 Tdi – 5-cylinder
Timing tool set, VW, Audi 2.5 Tdi – 5-cylinder
Product code: W0014
Wrench for alternator, VW, Audi, Mercedes (length 30mm, width 19.6mm)
Wrench for alternator, VW, Audi, Mercedes (length 30mm, width 19.6mm)
Product code: W0015
Wrench for truck injectors, MAN, Mercedes, Scania and others
Wrench for truck injectors, MAN, Mercedes, Scania and others
Product code: W0016
Timing tool set VW AUDI 2.5 TDI; V6 3.3 V8 TDI (2 locking plates and mandrel)
Timing tool set VW AUDI 2.5 TDI; V6 3.3 V8 TDI (2 locking plates and mandrel)
Product code: W0019
Timing tool set for Fiat, Lancia 1.2 1.4 16V, Palio, Siena
Timing tool set for Fiat, Lancia 1.2 1.4 16V, Palio, Siena
Product code: W0022
Timing tool set for Ford, Mazda 16V Zetec motors
Timing tool set for Ford, Mazda 16V Zetec motors
Product code: W0023
Valve spring removal tool for 8V, 12V, 16V engines
Valve spring removal tool for 8V, 12V, 16V engines.
Product code: W0024
Timing tool set for Fiat Multijet and Opel CDTI engines
Timing tool set 1.3 CDTI/JTD (Fiat Multijet, Opel CDTI).
Product code: W0025
Timing tool set 1.4 1.6 FSI VW/AUDI/SKODA
Timing tool set 1.4 1.6 FSI VW/AUDI/SKODA
Product code: W0026
Press, puller for bolts, VW T4, Mercedes Sprinter, VW LT
Press, puller for bolts, VW T4, Mercedes Sprinter, VW LT
Product code: W0027
Adapter + screw of injector puller, Mercedes CDI, VW TDI; Bosch
Adapter + screw of injector puller, Mercedes CDI, VW TDI; Bosch
Product code: W0029
Timing tool set, Opel Corsa 1,0 1,2 DOHC
Timing tool set, Opel Corsa 1,0 1,2 DOHC
Product code: W0030
Timing tool set, VW, Seat, Skoda 1.2 6V and 12V
A set of timing locks for 3-cylinder VW Seat Skoda 1.2 6/12V (chain driven) engines.
