Pneumatic brake fluid exchanger, 0.75l
Product code: MG50445
- Debrecen: 11
- Budapest: 126
Product description
Description
- Suitable for most of the traditional brakes and ABS-brake systems
- For brake fluid change in cars and motorcycles
- While changing, the fluid flows in a closed system, eliminating the risk of spillage or contamination
- Operating pressure 6-8 bar
- Capacity 0.75l
- 4 couplers
Product packing
| Pack number | Dimensions | Weight |
|---|---|---|
| 1 | 29 x 21 x 14 cm | 0.95 kg |
Delivery fee
| Delivery method | Gross price |
|---|---|
| Pickup in Nagytarcsa | 0,00 € |
| Pickup in Debrecen | 0,00 € |
| DHL Worldwide Express | 67,48 € |
More products in this category
Hand held brake pipe flaring tool
A manual brake pipe crimper is a tool used to seal brake lines by making SAE-type ends. The press allows the production of both single taper (OP1) and double taper (OP2) ends. Suitable for copper and copper-nickel joints. The press is designed for 3/16" or 4.75 mm diameter thin-walled steel pipes.
Product code: CKBB4128A
Brake bleeder tool, 1L
This compact and easy-to-use device enables a quick and efficient venting process. Up to 90-120psi
Product code: MG04B4091
8 PCS professional brake repairing tool
Contains the most popular brake tools used for servicing drum brakes on the most vehicles.
Product code: MG04B4040
Brake rewind tool set, 35pcs
Brake rewind tool set, 35pcs, for almost every car type, like Citroen, Audi, Fiat, Ford, BMW, Mercedes-Benz, Toyota, Volvo, VW, Renault, Opel
Product code: MG50064
Brake cylinder wind-back tool
Brake cylinder wind-back tool, for Audi, Ford, Honda, Jaguar, Mazda, Mitsubishi, Nissan, Rover, Saab, Subaru, Toyota, VW
Product code: MG50407
Break piston removal tool
Essential tool for retracting the brake piston to allow insertion of new brake pads.
Product code: CKB04066
Universal tool for front brake caliper push back
Universal tool for front brake caliper push back. Drive: hex, 17mm. Wheel diameter: 49mm.
Product code: W0003
Drum brake pliers
Drum brake pliers. For removing and installing return springs on drum brakes.
Product code: JBM52625
Brake piston driver
Device for screwing the brake pistons.
Product code: CKB04078
Brake caliper sockets for Audi Q5, A4, A5
Designed to loosen or tighten brake caliper bolts in Audi vehicles.
Product code: W0552
Wrench for rim unscrewing, ABS Renault Maskot, Master
Wrench for rim unscrewing, ABS Renault Maskot, Master
Product code: W0095
Puller hub bearing the brake disc Ford Transit
The puller hub bearing the brake disc is a special tool used for mounting and dismounting brake disc bearings on Ford Transit vehicles.
Product code: W0500
1/2" impact XZN bit socket set for VW brake calipers
1/2" impact XZN bit socket set for VW Transporter, LT M14 (length 43, 78mm), Golf M18 (length 43, 78mm), Sharan M16 (length 43, 78mm)
Product code: MG50385
Vacuum/pressure test kit
Vacuum range 0-1bar, pressure 0-3bar, tank (2x120ml), hose 600mm, couplers, adapters
Product code: MG50411
Brake system bleeding set
Pneumatic brake system bleeding set.
Product code: G02732
Hand held vacuum pump
Accepts many kinds of adapters to fit most types of vehicles. The body has a switch to control two kinds of pressure conditions. Pressure ranges: positive pressure 0-60psi (1-4inhg) and negative pressure 0-30psi (0 to -1inhg).
Product code: CHS-A998A
Plastic vacuum pump set
It is perfect for performing such works as: bleeding brake systems and checking vacuum sensors, brake boosters, throttle valves, exhaust gas recirculation valves, pressure modulators in automatic transmissions, etc.
Product code: G01157
Brake fluid oil exchanger
Remove, and replace fluid from most types and models of vehicle brake systems. Also removes trapped air.
Product code: GS-432
Brake Fluid Exchanging and Airing Machine
Brake Fluid Exchanging and Airing Machine is a device that is easy for one person to use, facilitates and speeds up the replacement of brake fluid, eliminates dirt and moisture in the brake system, and ensures adequate air removal for effective braking. It has the right cover kit for every vehicle.
Product code: FHD1000
Brake fluid tester pen
Quick and easy method to accurately gauge the moisture content of all types of brake fluid.
Product code: G02731
180° tube bender 1/4" (6mm), 5/16" (8mm) and 3/8" (10mm)
Tube bender. Diameter range: 1/4" (6mm), 5/16" (8mm) and 3/8" (10mm). For aluminum, copper and steel tubes. 0-180° angles.
Product code: JBM52905
Tube bending tool. For diameters: 6-10mm
Designed for bending copper tubes, aluminium tubes and stainless steel tubes.
Product code: G02723
Tube flaring set 3-19mm
Tube flaring set for tubes with diameters: 3, 5, 6, 8, 10, 12, 15, 16, 18, 19mm.
Product code: G02720
Tube double flaring tool set, 10pcs
Tube double flaring tool set, 10pcs, tube sizes: 3/16", 1/4", 5/6", 3/8", 7/6", 1/2", 5/8"
Product code: G02721
Tube flaring tool set with pipe cutter
Tube flaring tool set with pipe cutter. For tube sizes: 5, 6, 8, 10, 12, 14, 18mm.
Product code: G02722
Tube double flaring set, 9pcs
Tube double flaring set, 9pcs for brake line tubings.
Product code: K00180
Brake Disc Lathe Machine (Two-Functions)
Brake Disc Lathe Machine (Two-Functions) is specialized model to offer dual functionality. It has the feature of grinding both on the vehicle and outside with additional apparatuses to the existing disc lathe machine.
Product code: FDT7000
Onboard Brake Disc Lathe Machine
Onboard Brake Disc Lathe Machine is designed to provide a longer life of the discs by removing scratches, wear and curvatures that occur on discs over time.