Waste oil heater, 22-30kW
Product code: HP-125
Brand: Hiton
Product description
Description
- Suitable for following oils:
- Vegetable oils
- Used vegetable oils
- Mineral oils
- Used mineral oils (engine-, transmission-, hydraulic and HBO I, II, III heating ois)
- Synthetic oils
Suitable for
- Suitable for heating of industiral sites, warehouses, car shops, garages, agricultural buildings, cellars
Heating properties:
- Two power settings
- Protective cover
- Protection against the oil leakage and ignition
- Built-in control system
- LED furnace damage indicator
- High temperature-resistant steel furnace
- Manual ignition
- Radiates heat in all directions
- Tank capacity 50l
- At an emission of 50-70oC air, the room (1000m3) is heated to a temperature of approx. 12oC
- Reinforced frame
- Galvanized sheet, powder coated
- Automatic switching
Technical details
| Minimum heat output | 22kW |
| Maximum heat output | 30kW |
| Minimum oil consumption | 1.85kg/h |
| Maximum oil consumption | 2.55kg/h |
| Space capacity | max. 800m3 |
| Air flow | 1000m3/h |
| Voltage | 230V |
| Current | 0.6A |
| Required chimney diameter | 150mm |
| Size | 540x850x1370mm |
| Weight | 90kg |
Product packing
| Pack number | Dimensions | Weight |
|---|---|---|
| 1 | 86 x 60 x 160 cm | 81 kg |
Delivery fee
| Delivery method | Gross price |
|---|---|
| Pickup in Nagytarcsa | 0,00 € |
| Pickup in Debrecen | 0,00 € |
Available accessories
Primary oil filter for HP-105-145R waste oil heater
The primary oil filter is an essential part of the HP-125-145R waste oil heater. This filter offers a solution that allows the cleaning of used oils, minimizing the build-up of combustion products and ensuring the long life of your heater.
Product code: HP125.034
Gear motor for HP-105-145R waste oil heater
Gear motor for HP105, HP115, HP125, HP125.O, HP135, HP145, HP145R waste oil stoves.
Product code: HP105-145.RH
Chimney system for waste oil heaters
This kit includes 5pcs, 1m long stainless steel pipes, a stylish chimney cap and two 45° elbows.
Product code: HFK-150A
Oil Feed Line HP 105-125.052
The product was developed for HP 105-125 waste oil heaters. The inlet pipe is used for the supply of oil, its combustion and the operation of the heater. The intake pipe is oil and heat resistant to ensure long life and reliable operation.
Product code: HP105-125.052
More products in this category
Bimetallic ceramic control thermostat for LS-105B, LS-105G, LS-125N, LS-145 oil heaters
Bimetallic ceramic control thermostat with a combustion chamber sensor for LS-105B, LS-105G, LS-125N, and LS-145 oil heaters, ensuring precise temperature regulation.
Product code: PR00001
Waste oil heater, 8-30kW, galvanized
This heater is intended for heating industrial premises not covered by the central heating system.
Product code: LS-105G
Waste oil heater, 20-29kW
Waste oil heater, for used vegetable, synthetic and mineral oils and used mineral oils (engine-, transmission-, hydraulic and HBO I, II, III heating oils).
Product code: HP-115
Waste oil heater, 8-30kW, black
This heater is intended for heating industrial premises not covered by the central heating system.
Product code: LS-105B
Waste oil heater, 22-30kW
Waste oil heater, for used vegetable, synthetic and mineral oils and used mineral oils (engine-, transmission-, hydraulic and HBO I, II, III fluids).
Product code: HP-125O
Waste oil heater, 17-33kW
This heater is intended for heating industrial premises not covered by the central heating system.
Product code: LS-125N
Waste oil heater, 22-30kW
Waste oil heater, for used vegetable, synthetic and mineral oils and used mineral oils (engine-, transmission-, hydraulic and HBO I, II, III heating oils)
Product code: HP-125
Waste oil heater, 30-52kW
This heater is intended for heating industrial premises not covered by the central heating system.
Product code: LS-145
Waste oil heater, 30-42kW
Modern recycling of superfluous vegetable, mineral and synthetic oils. Power 30-42kW. For supplementing or wholly replacing heating, connection possible to create central heating. Overheating and fuel overflow protection
Product code: HP-145
Waste oil heater, 30-42kW
Modern recycling of superfluous vegetable, mineral and synthetic oils. For supplementing or wholly replacing heating, connection possible to create central heating. Overheating and fuel overflow protection
Product code: HP-145R
Waste oil heater with CH and HW, 39-55kW
Modern recycling of superfluous vegetable, mineral and synthetic oils. Power 39-55kW. For supplementing or wholly replacing heating, connection possible to central heating system and hot water system. Overheating and fuel overflow protection
Product code: HP-145-WH
Waste oil heater with CH, HW and active cooling system, 39-55kW
Modern recycling of superfluous vegetable, mineral and synthetic oils. Power 39-55kW. For supplementing or wholly replacing heating, connection possible to central heating system and hot water system. Overheating and fuel overflow protection. Active cooling system.
Product code: HP-145.R-WH
Exhaust gas economizer, 6.5KW, 270m³/h
This exhaust gas economizer is allowing the recovery of up to 40% of the heat escaping to the chimney. Two-way hot air outlet.
Product code: LS-ECO65
Chimney system for waste oil heaters
This kit includes 5pcs, 1m long stainless steel pipes, a stylish chimney cap and two 45° elbows.
Product code: HFK-150A
Oil pump HP-105-145R for used oil stoves
Designed for tired oil stoves, for efficient and safe transfer of fuel.
Product code: HP105-145.050
Vaporizer pan
Vaporizer pan for waste oil heater
Product code: HP-125-053
Burner plate
A burner plate is a component used to burn waste oils or other similar materials to produce thermal energy. The burner plate is therefore a defining element of wasted oil heaters.
Product code: HP145.053
Primary oil filter for HP-105-145R waste oil heater
The primary oil filter is an essential part of the HP-125-145R waste oil heater. This filter offers a solution that allows the cleaning of used oils, minimizing the build-up of combustion products and ensuring the long life of your heater.
Product code: HP125.034
Oil Feed Line HP 105-125.052
The product was developed for HP 105-125 waste oil heaters. The inlet pipe is used for the supply of oil, its combustion and the operation of the heater. The intake pipe is oil and heat resistant to ensure long life and reliable operation.
Product code: HP105-125.052
Gear motor for HP-105-145R waste oil heater
Gear motor for HP105, HP115, HP125, HP125.O, HP135, HP145, HP145R waste oil stoves.