
Rubber pad for STD-3040 two-post lifts
Product code: STD-3040 RBP
Brand: Lincos
- Budapest: 0
- Debrecen: 1
- Debrecen II: 0

Product description
Product packing
Pack number | Dimensions | Weight |
---|---|---|
1 | 12 x 12 x 3 cm | 0.22 kg |
Delivery fee
Delivery method | Gross price |
---|---|
Pickup in Nagytarcsa | 0,00 € |
Pickup in Debrecen | 0,00 € |
DHL Worldwide Express | 61,67 € |
Can be used with these products
More products in this category

Two-post lift 4.2t, manual safety lock release
Hydraulic two-post lift with 4200kg capacity, symmetric arms, 110mm low profile, manual safety lock release, supports up to 2616mm width, 2.2kW motor, ≤45s lift time.
Product code: STD-4042E 230V

On-ground scissor lift 3t, with drive-on ramps, 230V
Scissor lift lifting capacity 3t, lifting height 1850mm, voltage 230V, can be placed on the ground, min. height 110mm, low clearance vehicle can be lifted easily
Product code: U-B30 230V

Rubber pad for S508 and S508A floor jack
Rubber pad for S508 and S508A floor jack
Product code: S508/508A-RB

Two-post lift, 4.0t, electronic lock release
Symmetrical two-post lift, capacity 4.0t, electronic safety-lock release, voltage 230V/400V. Drive through width 2510mm, total height 2781mm, total width 3484mm, lifting height 1820mm
Product code: STD-5040E 400V

Floor jack, 2t
Lifting capacity 2 ton, min. height 130mm, max. height 330mm
Product code: S330C

Two-post lift, 4.5t, electronic lock release
Two-post lift, capacity 4.5t, electronic safety-lock release, voltage 230V/400V. Drive through width 2510mm, total height 2860mm, total width 3410mm, lifting height 1850mm, safety latch locking height 100cm
Product code: STD-5145E 400V

Rubber pad for STD-4040 two-post lifts
Rubber pad for STD-4040 two-post lifts
Product code: STD-4040 RBP

Portable scissor jack with ramps, 3t
Portable, easy to move, mid-rise scissor jack. Good choice for tire shops, body shops, workshops or personal use. Lifting capacity 3.0 tons. Lifting height: 980mm.
Product code: U-Z30M 230V

Electro-hydraulic lifting table, 1.2T
The lifting table is designed for the removal and installation of electric vehicle batteries, as well as engines, transmissions, transaxles, fuel tanks, suspensions, mounts, and chassis components. The lifting capacity is 1200kg.
Product code: SR12

Rubber pad for STD-5145 two post lift
Rubber pad for STD-5145 two post lift
Product code: STD-5145E-RP

Low profile scissor lift, 3t capacity
The H30M lift is a versatile and reliable lifting equipment suitable for a wide range of vehicles. It is designed to accommodate vehicles with a total weight not exceeding 3000kg, making it suitable for various cars, SUVs, small trucks, and other similar vehicles. Extra low profile scissor lift, 100mm. The quick lifting time (25-30 seconds) and the chassis lift design makes it ideal for busy tyre service shops. Lifting capacity 3t, lifting height 620mm.
Product code: U-H30M 230V

Rubber pad for K500 floor jack
Rubber pad for K500 floor jack
Product code: K500-RB

Mid-rise scissor lift 3.5t
Mid-rise scissor lift with moving kit, with start-up device, electrical lock release
Product code: HXL6230

Electro-hydraulic battery lift, 1.5T
The lifting table is designed for the removal and installation of electric vehicle batteries, as well as engines, transmissions, transaxles, fuel tanks, suspensions, mounts, and chassis components. The lifting capacity is 1500kg.
Product code: SR15

One-post lift 2.8t, electric lock release, 400V
Versatile due to small footprint and mobile design. 2800kgs lifitng capacity, electric shutter release, 1835mm lifting height, IP65 protection
Product code: SF-NM2800 400V

Electro-hydraulic motorcycle lift 1000kg
With its electro-hydraulic operation, this lift offers effortless lifting and lowering of motorcycles. Simply connect it to a power source, and with the press of a button, you can smoothly elevate your motorcycle to a comfortable working height. This saves you from the physical strain of manual lifting and allows for precise positioning.
Product code: HML1000

Two-post lift, 4.5t, manual lock release
Two-post lift, capacity 4,5t, manual safety-lock release, voltage 230V. Total height: 3380 mm, column height 2860mm, total width 3410mm, lifting height 1850mm, drive through width 2510mm.
Product code: STD-5145M 230V

Two-post lift 5,5t
Two-post lift, lifting capacity 5,5 t, electromagnetic lock release, power supply 230V/400V. Bottom interconnection, width between posts 3300 mm, height of post 2815mm, lifting height 1945 mm, lifting time 45-50 s
Product code: STD-3550 400V

Two-post lift, 4.5t, electronic lock release
Two-post lift, capacity 4.5t, electronic safety-lock release, voltage 230V/400V. Drive through width 2510mm, total height 2860mm, total width 3410mm, lifting height 1850mm, safety latch locking height 100cm
Product code: STD-5145E 230V

On-ground scissor lift 3t, adjustable ramp length
Scissor lift, lifting capacity 3t, lifting height 110-1850mm, voltage 230V/400V, adjustable ramp length 1475-2000mm
Product code: STD-5430 230V

Rubber pad for STD-3040 two-post lifts
Rubber pad for STD-3040 two-post lifts
Product code: STD-3040 RBP

On-ground scissor lift 3t, with drive-on ramps, 400V
Scissor lift lifting capacity 3t, lifting height 1850mm, voltage 400V, can be placed on the ground, min. height 110mm, low clearance vehicle can be lifted easily
Product code: U-B30 400V

Four-post lift with 4t load capacity, central manual safety lock release, mobile kit
Manual central locking four-post lift with 4t load capacity, mobile kit. Lifting height 1910mm, total folding width 2290mm, length of ramps 4320mm.
Product code: 4SF-4000C 230V

Two-post lift, 4,5t, manual lock release
Two-post lift, capacity 4,5t, manual safety-lock release, voltage 400V. Total height: 3380 mm, column height 2860mm, total width 3410mm, lifting height 1850mm, drive through width 2510mm.
Product code: STD-5145M 400V

Scissor lift with integrated second lifting jack, 5 tons
Lifting capacity 5 tons, lifting height 1.80 meters, runway length 5.0 meters, integrated second lifting jack with lifting height of 0,4 meter. Suitable for vehicle suspension alignment.
Product code: STD-5550

Engine balancer 680kg
Engine balancer, capacity 680kg, can be positioned with a threaded spindle
Product code: TL1010-1

Narrow scissor jack, hydraulic, 3t
Extra narrow scissor jack. Lifting height: 180 - 960mm. The quick lifting time (25-30 seconds) and the chassis jack design makes it ideal for busy tire service shops. Lifting capacity: 3t.
Product code: U-B30M 230V

Two-post lift 4t, automatic safety lock release
Two-post lift, lifting capacity 4t, automatic safety lock release, power supply 400V. Width between posts 2780mm, height of post 2824mm, mount width 3365mm, lifting height 1930mm
Product code: STD-4040E 400V

On-ground scissor lift 3t, adjustable ramp length
Scissor lift, lifting capacity 3t, lifting height 110-1850mm, voltage 400V, adjustable ramp length 1475-2000mm
Product code: STD-5430 400V

Four-post lift 5t
Four-post lift, lifting capacity 5t, pit jack, sliding plate, lifting height 1700mm, total width 3286 mm, total length 5825 mm, voltage 400V.
Product code: STD-5650

In-ground scissor lift, 3.5t
Flush mounted scissor lift, lifting capacity 3.5t, lifting height 1830mm, voltage 400V, min. height 220mm.
Product code: STD-5335A 400V

Air controlled hydraulic lifting table, 1.2T
The lifting table is designed for the removal and installation of electric vehicle batteries, as well as engines, transmissions, transaxles, fuel tanks, suspensions, mounts, and chassis components. The lifting capacity is 1200kg.
Product code: SR12A

Low profile scissor lift, 3t capacity
Extra low profile scissor lift, 105mm. The quick lifting time (25-30 seconds) and the chassis lift design makes it ideal for busy tyre service shops. Lifting capacity 3t, lifting height 960mm.
Product code: U-Z30 230V

Motorcycle lift and stand for Cross and Enduro bikes
Motorcycle lift and stand for Cross and Enduro bikes.
Product code: G02168

Motorcycle scissor lift, 500kg
Motorcycle scissor lift, 500kg
Product code: G02170

Rubber block for scissor lift STD-5430
Rubber block for scissor lift STD-5430
Product code: STD-5430-RB

Motorcycle lift and stand (front), up to 400kg
Motorcycle lift and stand (front), up to 400kg
Product code: G02165

Motorcycle lift and stand, flat pads (rear), 500kg
Motorcycle lift and stand, flat pads (rear), 500kg
Product code: G02166

Motorcycle lift and stand, 340kg
Motorcycle lift and stand, 340kg
Product code: G02172

Transmission jack, 500kg
Transmission jack, foot-pedal operated, fixed saddle, lifting capacity 0.5t, min. height 1100mm, max. height 1900mm
Product code: TL0901

Lift adapter set for Tesla Model 3/X/Y/S, 4pcs
Lift adapters are specifically designed for Tesla Models chassis. Made of neoprene that does not damage the painted surface of the jack point.
Product code: STD-4040-EVP

Two-post lift 5,5t
Two-post lift, lifting capacity 5,5 t, electromagnetic lock release, power supply 230V/400V. Bottom interconnection, width between posts 3300 mm, height of post 2815mm, lifting height 1945 mm, lifting time 45-50 s
Product code: STD-3550 230V

Motorcycle lift, pneumatic-hydraulic, 450kg
Motorcycle lift, capacity 450kg, with a front wheel lock. Minimal height 195mm, lifting height 780mm. For comfortable work on scooters, larger motorcycles.
Product code: TL1700-4A

Portable scissor lift, 2.8t
Portable, easy to move, mid-rise scissor lift. Good choice for tyre shop, body shop or work shop and family. Lifting capacity 2.8 tons, lifting height 1.4 meters.
Product code: STD-3128 230V

Steel loading ramps for ATVs, max. 450kgs, 2pcs
Ideal for loading lawn mowers, power equipments, hand trucks, wheel barrows, furniture,wheelchairs and other equipments. Heavy duty, solid steel ramps ends bolt easily to boards with hardware included.
Product code: MG04H0004

5T Bag Air Jack
The air jack can lift up to 5 tons, so it is perfect for servicing passenger cars or delivery vans. Telescope inside the lift ensures the stability of the entire system during operation. Max. height: 400mm
Product code: DK-230723-5

Hydraulic bottle jack 6-20t
Hydraulic bottle jack, lifting capacity 6/10/16/20t, min. height 200-220mm, max. height 385-430mm, lifting height 125-140mm, screw length 60mm
Product code: JWS-20B

Ramp set for cars 700x200x80mm, 5000kgs
These ramps are primarily used to provide access for trolley jacks, allowing for maintenance or repairs underneath the vehicle. They can be placed in front of the wheels to lift the car safely, providing clearance for the jack to be positioned.
Product code: MG04J1118

Engine hoist crane 2t, folding
Folding engine hoist crane, lifting capacity 2t, min. height 250mm, lifting height 2170mm, size 1420x1040x1400mm
Product code: TL1001-2

In-ground scissor lift, 3.5t
Flush mounted scissor lift, lifting capacity 3.5t, lifting height 1830mm, voltage 230/400V, min. height 220mm.
Product code: STD-5335A 230V

Engine stand 450kg
Engine stand, capacity 450kg, 2 freely moving wheels, 2 fixed wheels
Product code: TL1110-2

Air jack, balloon type, 3,5T
The air jack can lift up to 3,5 tons, so it is perfect for servicing passenger cars or delivery vans. Telescope inside the lift ensures the stability of the entire system during operation. Max. height: 500mm
Product code: CKBBJ0035

Single post ATV, motorcycle jack, 1T
Single post electro-hydraulic jack suitable for lifting ATVs (quads), motorcycles, golf carts, snowmobiles, etc. The wide base ensures stability. Make sure it is installed on an even suface. The forks are detachable if needed.
Product code: HSL1010

Two-post lift, 4.5t, electronic lock release
Two-post lift, capacity 4.5t, electronic safety-lock release, voltage 230V/400V. Drive through width 2510mm, total height 2860mm, total width 3410mm, lifting height 1850mm, safety latch locking height 30cm.
Product code: STD-5145X 230V

Two-post lift, 4.5t, electronic lock release
Two-post lift, capacity 4.5t, electronic safety-lock release, voltage 230V/400V. Drive through width 2510mm, total height 2860mm, total width 3410mm, lifting height 1850mm, safety latch locking height 30cm.
Product code: STD-5145X 400V

EV Battery lift table
The EV Battery Lift Table is a versatile and efficient lifting solution designed specifically for engine, transmission, and electric vehicle (EV) battery service up to 1000kg. With its numerous features and specifications, it provides an ideal platform for various maintenance and installation tasks.
Product code: U-DP8A

Air/hydraulic floor jack 50t, twin pistons
Air/hydraulic floor jack, tiltable handle can be locked at 3 points, polished twin pistons, lifting capacity 50/25t, min. height 190mm, max. height 492mm, lifting height 100mm (50t), 182mm (25t), height adapters 45, 75mm, air pressure 9-12bar
Product code: S50-2Q

Portable scissor lift, 2.7t, 230V
Portable, easy to move, mid-rise scissor lift. Good choice for tyre shop, body shop or work shop. Lifting capacity 2.7 tons, lifting height 1.2 meters.
Product code: STD-6227 230V

Workshop stand with roller 70-110cm
Workshop stand with roller 70-110cm, load capacity 50kg
Product code: WST70R

EV Battery lift table, 1T
The EV Battery Lift Table is a versatile and efficient lifting device specifically designed for electric vehicle batteries up to 1000kg. It combines electric and hydraulic drives with a 24V low voltage control system to ensure safe and reliable operation.
Product code: U-DP8

Rubber block for scissor lift STD-5335A
Rubber block for scissor lift STD-5335A
Product code: STD-5335A-RB

Chain Hoist, lifting height 2.5m, 2t
Closed-body manual chain hoist, 2-ton capacity, 2.5 m lifting height, with power-assisted transmission and long chain.
Product code: BGS-3484

Pneumatic Balloon Jack, moveable, max. 505mm, 2000kg
Mobile pneumatic balloon jack with 2000kg lifting capacity and a height range of 140–505mm.
Product code: BGS-71010

Engine Crane, 1000 kg
Heavy-duty, foldable engine crane with 4-position telescopic boom and hydraulic lift, ideal for daily workshop use. Max load: 1000 kg.
Product code: BGS-11998

Pneumatic portable jack 22t
Designed for heavy duty truck, bus and trailer shop use. It is also portable so it can be used for roadside service calls.