Brake piston driver
Product code: CKB04078
Brand: Castex
- Budapest: 4
- Debrecen: 1
Product description
Product description
Device for screwing the brake pistons.
Features
- 3/8" square drive
- Universal application for disc and drum brakes.
Application
- Citroen C3, C5
- Ford Mercury, Ford Mondeo 2.0
- Subaru 1.6, 1.8: SRX, GT, GTS
- Nissan Maxima, Primera
- Peugeot 206
- Alfa Romeo 164
- Fiat Uno, Stilo
- Ford Escort 2.0, Mondeo V6
- Honda Civic, CRX, Accord, Concerto
- Rover 220
- Saab 900
Product packing
| Pack number | Dimensions | Weight |
|---|---|---|
| 1 | 0 x 0 x 0 cm | 0.1 kg |
Delivery fee
| Delivery method | Gross price |
|---|---|
| Pickup in Nagytarcsa | 0,00 € |
| Pickup in Debrecen | 0,00 € |
| DHL Worldwide Express | 61,67 € |
More products in this category
Brake rewind tool set, 21pcs
This 21-piece tool set is a powerful tool to properly rotate and push the piston back into the caliper during brake maintenance or replacement tasks. The set is suitable for many vehicles, making it a versatile addition to any workshop.
Product code: MG50061
Adjustable Brake Wind-Back Adaptor Set
This Adjustable Brake Wind-Back Adaptor Set is an essential toolkit for automotive professionals involved in brake maintenance and repair. The set features two adjustable brake caliper rewind adaptors, tailored to cater to a broad spectrum of vehicles.
Product code: MG94017
Universal brake caliper wind back tool kit, 16pcs
Pneumatic rewind tool for disc brake pistons with adapters. Brand new practical and convenient kit for replacing front and rear disc brake pads.
Product code: DK-230540
Ratcheting brake caliper press
Effortlessly maintain your brake calipers with our ratcheting brake caliper press. Its 360° rotation and centrally located ratchet evenly spread force to prevent misalignment. Works on twin and quad piston fixed calipers, as well as single calipers. Comfortable ergonomic handle included.
Product code: MG04B4069
Brake cylinder wind-back tool
Brake cylinder wind-back tool, for Audi, Ford, Honda, Jaguar, Mazda, Mitsubishi, Nissan, Rover, Saab, Subaru, Toyota, VW
Product code: MG50407
Break piston removal tool
Essential tool for retracting the brake piston to allow insertion of new brake pads.
Product code: CKB04066
Brake piston presser. Max 70mm jaw spread.
Essential tool for pressing in the brake piston to allow insertion of new brake pads.
Product code: G02534
Universal tool for front brake caliper push back
Universal tool for front brake caliper push back. Drive: hex, 17mm. Wheel diameter: 49mm.
Product code: W0003
Brake spring pliers
Brake spring clamp for drum brakes. For removing and installing drum brake springs.
Product code: MG04B4039
Drum brake pliers
Drum brake pliers. For removing and installing return springs on drum brakes.
Product code: JBM52625
Brake spring compressor
A brake spring compressor is a tool that allows you to safely and efficiently remove and install brake springs. Remove and install the 5/8" (16mm) to 11/16" (17.5mm) diameter retaining springs. Using the tool makes maintenance and repair processes easier.
Product code: MG04B4036
Brake spring washer tool
A special tool used in automotive repair and maintenance to remove and install brake springs and washers. This helps ensure the proper and safe operation of the braking system, which is critical to the overall safety and performance of the vehicle.
Product code: MG04B4037
Brake and fuel hose clamp set, 2pcs
The 2-Piece Brake and Fuel Hose Clamp Set is an essential tool for any automotive repair task. Featuring a robust alloy body and a strong steel clamp arm, these clamps are specially designed for handling brake and fuel lines, as well as vacuum hoses.
Product code: MG92501
8 PCS professional brake repairing tool
Contains the most popular brake tools used for servicing drum brakes on the most vehicles.
Product code: MG04B4040
Universal drum and disc brake tool set, 15pcs
This 15-piece universal drum and disc brake tool set is a comprehensive kit designed for the replacement and cleaning of front and rear brakes on various car models. This set includes a wide range of tools to handle different aspects of brake maintenance and repair.
Product code: MG97012
Brake piston driver
Device for screwing the brake pistons.
Product code: CKB04078
6pcs brake bleeder socket & wrench set
The 6pcs brake bleeder socket & wrench set helps to drain the oil easily, and with the help of different sizes of wrenches, the brake oil drain screws can be easily removed, so maintenance work will be faster and more efficient.
Product code: MG04B4105
Brake and clutch fluid vacuum bleeding pump, 3L+1L
It is designed to maintain the hydraulic system of the brake system and clutch.
Product code: MG93683
Brake bleeder tool, 1L
This compact and easy-to-use device enables a quick and efficient venting process. Up to 90-120psi
Product code: MG04B4091
Hose clamp set, 4pcs
Hose clamp set, 4pcs are light and compact steel alloy construction for ease of use where space is limited.
Product code: MG04B4018
1/2" pentagon socket (14, 19mm) and bit (10mm) set
Pentagon sockets are very important in car assembly, as they are used for many car parts. For example, Allen wrenches can be used to remove or tighten the engine oil filter, suspension components, brake system components, exhaust system, and wheel bolts.
Product code: MG50401
Brake caliper sockets for Audi Q5, A4, A5
Designed to loosen or tighten brake caliper bolts in Audi vehicles.
Product code: W0552
Wrench for rim unscrewing, ABS Renault Maskot, Master
Wrench for rim unscrewing, ABS Renault Maskot, Master
Product code: W0095
Puller hub bearing the brake disc Ford Transit
The puller hub bearing the brake disc is a special tool used for mounting and dismounting brake disc bearings on Ford Transit vehicles.
Product code: W0500
Hand held vacuum pump
A multifunction vacuum diagnostic tool with robust compact design.
Product code: MG04B4028
Hand held vacuum pump
Accepts many kinds of adapters to fit most types of vehicles. The body has a switch to control two kinds of pressure conditions. Pressure ranges: positive pressure 0-60psi (1-4inhg) and negative pressure 0-30psi (0 to -1inhg).
Product code: CHS-A998A
Vacuum/pressure test kit
The Vacuum/Pressure Test Kit is a comprehensive diagnostic tool designed for a wide range of automotive testing and maintenance tasks. It is engineered to measure both vacuum and pressure levels within an automotive system.
Product code: MG50411
Brake pressure test kit
Brake pressure test kit is a comprehensive kit for accurate brake pressure measurement, suitable for testing front and rear brakes.
Product code: MG04B4055
Vacuum and pressure gauge
Measuring range (pressure) 0.1bar, 14, 18mm coupling adapter
Product code: MG50190
Brake system bleeding set
Pneumatic brake system bleeding set.
Product code: G02732
Brake fluid oil exchanger
Remove, and replace fluid from most types and models of vehicle brake systems. Also removes trapped air.
Product code: GS-432
Brake Fluid Exchanging and Airing Machine
Brake Fluid Exchanging and Airing Machine is a device that is easy for one person to use, facilitates and speeds up the replacement of brake fluid, eliminates dirt and moisture in the brake system, and ensures adequate air removal for effective braking. It has the right cover kit for every vehicle.
Product code: FHD1000
Brake fluid tester
Brake fluid tester is designed to analyze the amount of moisture content within the brake system.
Product code: MG04D7012
Brake fluid tester pen
Quick and easy method to accurately gauge the moisture content of all types of brake fluid.
Product code: G02731
Professional tube bending tool for diameters 5, 6, 8, 10mm
Makes perfect bends in aluminum, copper and steel pipes.
Product code: MG04B4019
Tube bending tool. For diameters: 6-10mm
Designed for bending copper tubes, aluminium tubes and stainless steel tubes.
Product code: G02723
180° tube bender 1/4" (6mm), 5/16" (8mm) and 3/8" (10mm)
Tube bender. Diameter range: 1/4" (6mm), 5/16" (8mm) and 3/8" (10mm). For aluminum, copper and steel tubes. 0-180° angles.
Product code: JBM52905
10pcs double pipe flaring tool set
The pipe flaring is particularly important for the installation of brake pipes used in the brake system, where precise and safe fitting is essential. It can also be a useful tool for air conditioner pipes.
Product code: MG04B4092A
10pcs double pipe flaring tool set
Suitable for flaring different pipes (Diameters: 5, 6, 8, 10, 12, 14, 16mm)
Product code: MG04B4092M
The Universal Flaring Tool Kit Adjustable (5-16mm)
The Universal Flaring Tool Kit Adjustable (5-16mm) is designed to create conical or tapered flares on brass and aluminum pipes. It is adjustable and can accommodate a range of sizes from 5mm to 16mm (3/16" - 5/8").
Product code: MG04D1013
Tube flaring set 3-19mm
Tube flaring set for tubes with diameters: 3, 5, 6, 8, 10, 12, 15, 16, 18, 19mm.
Product code: G02720
Tube double flaring tool set, 10pcs
Tube double flaring tool set, 10pcs, tube sizes: 3/16", 1/4", 5/6", 3/8", 7/6", 1/2", 5/8"
Product code: G02721
Tube flaring tool set with pipe cutter
Tube flaring tool set with pipe cutter. For tube sizes: 5, 6, 8, 10, 12, 14, 18mm.
Product code: G02722
Hand held brake pipe flaring tool
A manual brake pipe crimper is a tool used to seal brake lines by making SAE-type ends. The press allows the production of both single taper (OP1) and double taper (OP2) ends. Suitable for copper and copper-nickel joints. The press is designed for 3/16" or 4.75 mm diameter thin-walled steel pipes.
Product code: CKBB4128A
Tube double flaring set, 9pcs
Tube double flaring set, 9pcs for brake line tubings.
Product code: K00180
Brake Disc Lathe Machine (Two-Functions)
Brake Disc Lathe Machine (Two-Functions) is specialized model to offer dual functionality. It has the feature of grinding both on the vehicle and outside with additional apparatuses to the existing disc lathe machine.
Product code: FDT7000
Onboard brake disc lathe machine
Using an on-board brake disc lathe saves time and reduces risk of misalignment by allowing precise resurfacing of brake discs without needing to remove them from the car.
Product code: FDT4000
Onboard Brake Disc Lathe Machine
Onboard Brake Disc Lathe Machine is designed to provide a longer life of the discs by removing scratches, wear and curvatures that occur on discs over time.