Special promotions are available! Don't miss out on great deals!
Hand held vacuum pump
Product code: CHS-A998A
Brand: Castex
Product description
Product description
Manual pump that creates a vacuum to check various systems in the car.
Application
- fuel supply systems (For example in the case of a fuel pump failure. When checking the installation, observe if there are air bubbles in the fuel)
- pressure sensors (within operating range)
- exhaust gas recirculation valves
- throttles
- fuel pressure regulators
- pressure modulator in automatic transmissions
- brake assistance etc
It is also used for venting the brake system by one person. Thanks to the accessories, it fits all passenger cars.
Set contains
- Metal pump with a manometer with a range (0 - 76cm Hg) (-1 to 0Bar)
- 2 flexible hoses, approx. 600mm long
- set of connection terminals with wires
- set of connection terminals and plugs
- container
- 2 caps for the container
Product packing
| Pack number | Dimensions | Weight |
|---|---|---|
| 1 | 0 x 0 x 0 cm | 1.3 kg |
Delivery fee
| Delivery method | Gross price |
|---|---|
| Pickup in Nagytarcsa | 0,00 € |
| Pickup in Debrecen | 0,00 € |
| DHL Worldwide Express | 72,56 € |
Alternative products
Hand held vacuum pump
A multifunction vacuum diagnostic tool with robust compact design.
Product code: MG04B4028
Vacuum tester and brake bleeding kit
This vacuum tester and brake bleeding kit is a multifunctional diagnostic tool for identifying faults in vehicle systems. With a vacuum range of 0-700 mm Hg, it includes a tank, hoses, and adapters for bleeding brake and clutch systems. Suitable for valve seals, A/C and fuel system testing, traditional and ABS brake systems, and more.
Product code: MG50404A
More products in this category
Brake cylinder wind-back tool
Brake cylinder wind-back tool, for Audi, Ford, Honda, Jaguar, Mazda, Mitsubishi, Nissan, Rover, Saab, Subaru, Toyota, VW
Product code: MG50407
Brake and clutch system extractor, refiller and bleeder, 2l
Pneumatic brake and clutch system extractor, refiller, and bleeder with a 2L capacity. Designed for standard and ABS brake systems, featuring an integrated silencer, adjustable swivel clamp, and long silicone hoses for convenience.
Product code: MG93680D
Brake spring compressor
A brake spring compressor is a tool that allows you to safely and efficiently remove and install brake springs. Remove and install the 5/8" (16mm) to 11/16" (17.5mm) diameter retaining springs. Using the tool makes maintenance and repair processes easier.
Product code: MG04B4036
Hand held vacuum pump
A multifunction vacuum diagnostic tool with robust compact design.
Product code: MG04B4028
Pneumatic brake fluid exchange kit (10 - 40psi)
This brake bleeder kit is suitable for bleeding brake and clutch systems in vehicles with an ABS system.
Product code: MG04B4023
Brake spring pliers
Brake spring clamp for drum brakes. For removing and installing drum brake springs.
Product code: MG04B4039
Brake bleeder tool, 1L
This compact and easy-to-use device enables a quick and efficient venting process. Up to 90-120psi
Product code: MG04B4091
Brake rewind tool set, 21pcs
This 21-piece tool set is a powerful tool to properly rotate and push the piston back into the caliper during brake maintenance or replacement tasks. The set is suitable for many vehicles, making it a versatile addition to any workshop.
Product code: MG50061
Pneumatic brake caliper rewind tool set, 16pcs
This pneumatic brake caliper rewind tool set includes right- and left-handed screw threads, making it suitable for various car brands including Citroen, Audi, Fiat, Alfa Romeo, Ford, Isuzu, Honda, Jaguar, BMW, Mercedes-Benz, Mitsubishi, Nissan, Rover, Toyota, Volvo, VW, Saab, Renault, Mini, Opel, and Peugeot.
Product code: MG50065A
1/2" impact XZN bit socket set for VW brake calipers
1/2" impact XZN bit socket set for VW Transporter, LT M14 (length 43, 78mm), Golf M18 (length 43, 78mm), Sharan M16 (length 43, 78mm)
Product code: MG50385
Pneumatic brake fluid exchanger, 0.75l
For draining and filling in oil, bleeding, suitable for cars, motorcycles. Accurate and quick operation.
Product code: MG50445
Vacuum/pressure test kit
The Vacuum/Pressure Test Kit is a comprehensive diagnostic tool designed for a wide range of automotive testing and maintenance tasks. It is engineered to measure both vacuum and pressure levels within an automotive system.
Product code: MG50411
Vacuum tester and brake bleeding kit
This vacuum tester and brake bleeding kit is a multifunctional diagnostic tool for identifying faults in vehicle systems. With a vacuum range of 0-700 mm Hg, it includes a tank, hoses, and adapters for bleeding brake and clutch systems. Suitable for valve seals, A/C and fuel system testing, traditional and ABS brake systems, and more.
Product code: MG50404A
Brake caliper sockets for Audi Q5, A4, A5
Designed to loosen or tighten brake caliper bolts in Audi vehicles.
Product code: W0552
Vacuum and pressure gauge
Measuring range (pressure) 0.1bar, 14, 18mm coupling adapter
Product code: MG50190
Brake and clutch fluid vacuum bleeding pump, 3L+1L
It is designed to maintain the hydraulic system of the brake system and clutch.
Product code: MG93683
Dial indicator with magnetic base set
This Dial Indicator with Magnetic Base Set is an essential tool for automotive professionals, particularly useful for quickly and easily checking brake disc run-out. Its design and features make it a versatile and precise instrument for various measurement tasks in an automotive workshop.
Product code: MG97015
Hose clamp set, 4pcs
Hose clamp set, 4pcs are light and compact steel alloy construction for ease of use where space is limited.
Product code: MG04B4018
Brake and fuel hose clamp set, 2pcs
The 2-Piece Brake and Fuel Hose Clamp Set is an essential tool for any automotive repair task. Featuring a robust alloy body and a strong steel clamp arm, these clamps are specially designed for handling brake and fuel lines, as well as vacuum hoses.
Product code: MG92501
Brake caliper socket set, 10pcs for VAG, BMW, Mercedes, Porsche
10-piece brake caliper socket set made from durable CR-MO and 50BV30 steel, compatible with VAG, BMW, Mercedes, Porsche, and more. Includes a range of 10pt, 7pt, Hex, and Metric sockets.
Product code: MG93256A
10pcs double pipe flaring tool set
Suitable for flaring different pipes (Diameters: 5, 6, 8, 10, 12, 14, 16mm)
Product code: MG04B4092M
6pcs brake bleeder socket & wrench set
The 6pcs brake bleeder socket & wrench set helps to drain the oil easily, and with the help of different sizes of wrenches, the brake oil drain screws can be easily removed, so maintenance work will be faster and more efficient.
Product code: MG04B4105
Professional tube bending tool for diameters 5, 6, 8, 10mm
Makes perfect bends in aluminum, copper and steel pipes.
Product code: MG04B4019
Adjustable brake caliper rewind tool set, 7pcs
7-piece adjustable brake caliper rewind set with 2- and 3-pin adaptors; suitable for vehicles with EPB systems.
Product code: MG99000
Manual/pneumatic fluid extractor, 6.5L
6.5L oil extractor with manual and pneumatic operation, includes hoses, tubes, and dipstick adapter.
Product code: MG96032
Brake fluid change tool
Tool for efficient brake fluid replacement or air bleeding in cars, motorcycles, and trucks.
Product code: MG78012
Universal adapter for brake bleeding and filling
Universal brake bleeding adapter, 28–70mm adjustable, fits reservoirs with filler cap collar, max. pressure 3.5bar.
Product code: MG96011
Brake spring washer tool
A special tool used in automotive repair and maintenance to remove and install brake springs and washers. This helps ensure the proper and safe operation of the braking system, which is critical to the overall safety and performance of the vehicle.
Product code: MG04B4037
8 PCS professional brake repairing tool
Contains the most popular brake tools used for servicing drum brakes on the most vehicles.
Product code: MG04B4040
Brake pressure test kit
Brake pressure test kit is a comprehensive kit for accurate brake pressure measurement, suitable for testing front and rear brakes.
Product code: MG04B4055
Manual brake lining gauge set
Manual brake lining gauge set a handy tool designed to accurately measure the thickness of brake linings.
Product code: MG04B4079
Brake bit socket set 7mm, 9mm, 3/8" square drive, 2pcs
A 2-piece brake bit socket set with 7mm and 9mm sizes, designed for BMW, Mercedes, and other vehicle brake linings. Fits 3/8" square drive.
Product code: MG93282
1/2" pentagon socket (14, 19mm) and bit (10mm) set
Pentagon sockets are very important in car assembly, as they are used for many car parts. For example, Allen wrenches can be used to remove or tighten the engine oil filter, suspension components, brake system components, exhaust system, and wheel bolts.
Product code: MG50401
Brake cylinder retainer remover
This specialized tool is meticulously designed for the efficient removal and installation of brake cylinders. It simplifies the process by expertly expanding and securely holding the retainer ring, ensuring a smooth operation. This tool also serves a dual purpose in facilitating the removal and installation of locking rings on drive shafts during CV joint service.
Product code: MG96116
Brake disc caliper, 0-45mm
Designed to accurately measure the thickness of brake discs. Its long body design enables use on some vehicles without the need to remove the wheel. It has a spring action plunger for quick operation and a metric scale in 1mm increments from 0 to 45mm. Suitable for use on motorcycles, cars and commercial vehicles.
Product code: MG96487
Universal drum and disc brake tool set, 15pcs
This 15-piece universal drum and disc brake tool set is a comprehensive kit designed for the replacement and cleaning of front and rear brakes on various car models. This set includes a wide range of tools to handle different aspects of brake maintenance and repair.
Product code: MG97012
Universal brake piston rewind tool adapter set, 3pcs
3-piece set with 2-pin and 3-pin adjustable brake caliper rewind adapters. Includes magnetic 2-pin 3/8" drive adapter, compatible with most vehicles and EPB (Electronic Parking Brake) tools.
Product code: MG98999
Brake piston cube 3/8" square drive
This Brake Piston Cube is an essential tool designed for retracting the parking brake piston prior to the installation of new brake pads.
Product code: MG99003
Adjustable Brake Wind-Back Adaptor Set
This Adjustable Brake Wind-Back Adaptor Set is an essential toolkit for automotive professionals involved in brake maintenance and repair. The set features two adjustable brake caliper rewind adaptors, tailored to cater to a broad spectrum of vehicles.
Product code: MG94017
Universal Brake Piston Reset Tool Set, 8pcs
This 8-piece set includes unique adjustable 2-pin, 3-pin, and 4-pin adapters along with a 3/8" adapter with a magnet. Designed for both clockwise and left-handed use, it allows for a centered reset of the brake piston, preventing tilting and avoiding damage to boots, pistons, and piston bores in the brake caliper.
Product code: MG94015K
Universal brake caliper wind back tool kit, 16pcs
Pneumatic rewind tool for disc brake pistons with adapters. Brand new practical and convenient kit for replacing front and rear disc brake pads.
Product code: DK-230540
Brake piston wind back tool set, 18pcs
Designed to push back or wind back brake pistons. Includes left-handed and right-handed thrust bolt assemblies.
Product code: DK-230542
Brake caliper thread replacement inserts, M9x1.25mm, 10pcs
10-piece stainless steel brake caliper thread replacement inserts, M9x1.25mm, designed for professional repairs of damaged or worn brake caliper threads.
Product code: MG99007A
Brake caliper thread repair kit, M12x1.5mm
Discover the practicality and efficiency of our Brake Caliper Thread Repair Kit, designed for the seamless repair of M12x1.5mm threads. This comprehensive set ensures accurate, durable repairs for brake caliper mounting threads, providing a straightforward solution for automotive professionals. Its components are crafted for precision, durability, and ease of use, making it an essential toolkit for maintaining vehicle brake systems.
Product code: MG99008
Brake caliper thread replacement inserts, M12x1.5mm, 10pcs
High-strength stainless steel brake caliper thread replacement inserts, sized M12x1.5mm. This 10-piece set is perfect for restoring damaged or worn threads in brake calipers, ensuring long-lasting, reliable repairs. Ideal for professional mechanics and automotive repair shops. Easy installation with standard tools.
Product code: MG99008A
Brake piston driver
Device for screwing the brake pistons.
Product code: CKB04078
Drum brake pliers
Drum brake pliers. For removing and installing return springs on drum brakes.
Product code: JBM52625
Hand held brake pipe flaring tool
A manual brake pipe crimper is a tool used to seal brake lines by making SAE-type ends. The press allows the production of both single taper (OP1) and double taper (OP2) ends. Suitable for copper and copper-nickel joints. The press is designed for 3/16" or 4.75 mm diameter thin-walled steel pipes.
Product code: CKBB4128A
Tube double flaring set, 9pcs
Tube double flaring set, 9pcs for brake line tubings.
Product code: K00180
Tube flaring set 3-19mm
Tube flaring set for tubes with diameters: 3, 5, 6, 8, 10, 12, 15, 16, 18, 19mm.
Product code: G02720
180° tube bender 1/4" (6mm), 5/16" (8mm) and 3/8" (10mm)
Tube bender. Diameter range: 1/4" (6mm), 5/16" (8mm) and 3/8" (10mm). For aluminum, copper and steel tubes. 0-180° angles.
Product code: JBM52905
Tube bending tool. For diameters: 6-10mm
Designed for bending copper tubes, aluminium tubes and stainless steel tubes.
Product code: G02723
Brake Fluid Tester
Compact brake fluid tester with 4 LED indicators. Compatible with DOT3, DOT4, DOT5.1 fluids.
Product code: BGS-67241
Onboard brake disc lathe machine
Using an on-board brake disc lathe saves time and reduces risk of misalignment by allowing precise resurfacing of brake discs without needing to remove them from the car.
Product code: FDT4000
Flaring tool kit for brake lines
For making ends of brake lines or copper, copper-nickel and thin-walled steel pipes. Adapters: 4.75, 6.35, 7.95, 9.50, 11.10, 12.70, 15.87mm
Product code: CKB09065
Cutting blades for FDT4000, 1 pair
Durable cutting blades designed for the FDT4000 brake disc lathe machine. Comes as a pair, ensuring precise and efficient brake disc resurfacing.
Product code: KW10
Ratcheting brake caliper press
Effortlessly maintain your brake calipers with our ratcheting brake caliper press. Its 360° rotation and centrally located ratchet evenly spread force to prevent misalignment. Works on twin and quad piston fixed calipers, as well as single calipers. Comfortable ergonomic handle included.
Product code: MG04B4069
Brake fluid tester
Brake fluid tester is designed to analyze the amount of moisture content within the brake system.
Product code: MG04D7012
10pcs double pipe flaring tool set
The pipe flaring is particularly important for the installation of brake pipes used in the brake system, where precise and safe fitting is essential. It can also be a useful tool for air conditioner pipes.
Product code: MG04B4092A
Flaring tool kit for brake lines, 13pcs
Flaring brake line tool kit the primary tool for chip-free and parallel cutting as well as pipe flanging.
Product code: MG99066
The Universal Flaring Tool Kit Adjustable (5-16mm)
The Universal Flaring Tool Kit Adjustable (5-16mm) is designed to create conical or tapered flares on brass and aluminum pipes. It is adjustable and can accommodate a range of sizes from 5mm to 16mm (3/16" - 5/8").
Product code: MG04D1013
Mobile Electric Brake Bleeder
Electric brake bleeder with 2 pumps, 5L tanks, 7.5m hoses, and built-in storage. Compatible with all DOT fluids and LHM. 230V, mobile on wheels.
Product code: 03.036.35ECO
Universal tool for front brake caliper push back
Universal tool for front brake caliper push back. Drive: hex, 17mm. Wheel diameter: 49mm.
Product code: W0003
Puller hub bearing the brake disc Ford Transit
The puller hub bearing the brake disc is a special tool used for mounting and dismounting brake disc bearings on Ford Transit vehicles.
Product code: W0500
Brake rewind tool set, 35pcs
Brake rewind tool set, 35pcs, for almost every car type, like Citroen, Audi, Fiat, Ford, BMW, Mercedes-Benz, Toyota, Volvo, VW, Renault, Opel
Product code: MG50064
Wrench for rim unscrewing, ABS Renault Maskot, Master
Wrench for unscrewing the ABS rim/ring on Renault Mascott and Renault Master models with increased load capacity, designed for efficient and safe removal.
Product code: W0095
Brake fluid oil exchanger
Remove, and replace fluid from most types and models of vehicle brake systems. Also removes trapped air.
Product code: GS-432
Brake Piston Reset Tool Set, 35pcs
35-piece set for manually resetting brake pistons on most vehicles. Includes left and right threaded tools and adapter plates.
Product code: BGS-91115
Test bench for diagnostics of brake calipers
The MS300 test bench is designed for diagnosing and repairing brake calipers, including electromechanical parking brakes. It assesses performance, air-tightness, and enables effective repairs.
Product code: MS300
Universal Parking Brake Mechanism Tool for TRW Brake Calipers
Special tool for installation and removal of parking brake mechanisms in rear TRW brake calipers, suitable for all vehicle makes.
Product code: MS30001
Universal Parking Brake Mechanism Tool for ATE Brake Calipers
Special tool for installation and removal of parking brake mechanisms in rear ATE brake calipers, suitable for all vehicle makes.
Product code: MS30002
Universal Parking Brake Mechanism Tool for BOSCH Brake Calipers
Special tool for installation and removal of parking brake mechanisms in rear BOSCH brake calipers, suitable for all vehicle makes.
Product code: MS30004
Test bench for diagnostics of brake calipers
The MS301 test bench is designed for diagnostics of brake calipers of passenger cars and light commercial vehicles. The bench allows you to determine the tightness of the unit by creating hydraulic pressure in it.
Product code: MS301
Brake drum extractor / drive shaft push-out tool, 5-legs, universal
Universal 5-leg tool for extracting brake drums and pressing out drive shafts; fits up to 6-hole hubs, max Ø200mm.
Product code: BGS-7682
Brake Bleeding Adapter, Tesla Models 3 & Y
Brake bleeding adapter for Tesla Model 3 and Y (2017–2021), with 360° rotatable air connection and pressure-sealing fit.
Product code: BGS-66518
Adapter Set for Air Brake Bleeder, for Tesla Models 3, Y, S, X, 2 pcs.
2-piece adapter set for air brake bleeders, for Tesla Models 3, Y, S, X (2012–2021), with 360° rotatable air connection.
Product code: BGS-66517
Brake fluid tester, 6-LED
Brake fluid tester with 6-LED display, for DOT3, DOT4, DOT5.1 fluids, AAA battery included.
Product code: BGS-67242
Air Brake Bleeder - Set, 11 pcs.
11-piece air brake bleeder set for brake and clutch systems, 1L capacity, 6.3mm quick coupler, 6–12 bar, 862g.
Product code: BGS-18087
Air Brake Bleeder
Air brake bleeder with 5L reservoir, pressure regulator, diaphragm separation, and quick couplings, includes E20 adaptor.
Product code: BGS-8315
Adaptor Set for BGS 8315, for Audi, BMW, Ford, Honda, Nissan, Opel / Vauxhall, VW
Adapter set for BGS 8315 brake bleeder, fits Audi, BMW, Ford, Honda, Nissan, Opel, VW, includes fast couplings and various caps.
Product code: BGS-8316
Brake Bleeding Adapter, Tesla Models S & X
Brake bleeding adapter for Tesla Model S and X (2012–2021), with 360° rotatable air connection and pressure-sealing fit.
Product code: BGS-66519
Brake fluid tester
Brake fluid tester with 4-LED display, suitable for DOT3, DOT4, DOT5.1, powered by 9V battery.
Product code: BGS-63525
Brake Calliper Tool for Iveco Trucks, 7 pcs.
7-piece brake caliper tool set for resetting pistons on Iveco Stralis, Eurocargo, Daily, includes ratchet, discs, and bits.
Product code: BGS-1104
Brake Pressure Test Gauge Set
Brake pressure gauge set for direct hydraulic pressure testing on calipers, cylinders, or Teves ABS units; includes multiple adaptors and dual gauges.
Product code: BGS-1271
Hydraulic flaring tool set
Hydraulic flaring tool for brake, transmission, and A/C lines. Supports metric, 45° double, and push-connect flaring.
Product code: BGS-9445
Double Flaring Tool Kit with Pipe Cutter, 10pcs
10-piece flaring tool kit for creating single and double flares, includes pipe cutter and dies for 4.75–12mm pipes.
Product code: BGS-70221
Brake Maintenance and Assembly Tool Set, 15 pcs
15-piece universal brake tool set for drum and disc brake systems. Includes pliers, brushes, file, sockets, wrench, and driver.
Product code: BGS-1818
Air Brake Bleeding and Oil Extraction Unit – Pneumatic and Manual, 10L
10L pneumatic and manual oil extractor with brake bleeder, for non-corrosive fluids, with multi-diameter suction hoses and one-hand valve operation.
Product code: BGS-3155
Brake Fluid Tester, Boiling Point Measuring System
Professional brake fluid tester for boiling point measurement and water content analysis. Works with DOT 3, DOT 4, DOT 4 PLUS, and DOT 5.1.
Product code: BGS-6905
Vacuum Pump / Brake Bleeder Tool
Manual vacuum pump and brake bleeder for testing vacuum components and bleeding brake or clutch systems.
Product code: BGS-70205
Brake Fluid Bleeder
Brake fluid bleeder with 3 adapters for safe and efficient fluid change in brake and clutch systems.
Product code: BGS-70909
Onboard Brake Disc Lathe Machine
Onboard Brake Disc Lathe Machine is designed to provide a longer life of the discs by removing scratches, wear and curvatures that occur on discs over time.
Product code: FDT5000
Brake Disc Lathe Machine
Brake Disc Lathe Machine is suitable for discs of all cars and light commercial vehicles. The deformation that occurs on the surface of the disc over time can be removed by grinding with our machine. In this way, you can get a surface as if it were new. Lathe process can be done both automatically and manually. It is done by grinding both surfaces at the same time. All the tools required for the lathe process are available with the machine.
Product code: FDT6000
Brake Disc Lathe Machine (Two-Functions)
Brake Disc Lathe Machine (Two-Functions) is specialized model to offer dual functionality. It has the feature of grinding both on the vehicle and outside with additional apparatuses to the existing disc lathe machine.
Product code: FDT7000
Brake Fluid Exchanging and Airing Machine
Brake Fluid Exchanging and Airing Machine is a device that is easy for one person to use, facilitates and speeds up the replacement of brake fluid, eliminates dirt and moisture in the brake system, and ensures adequate air removal for effective braking. It has the right cover kit for every vehicle.
Product code: FHD1000
Drum Brake and Brake Disc Lathe Machine
Drum Brake and Brake Disc Lathe Machine is suitable for discs and drums of all cars and light commercial vehicles. The deformation that occurs on the surface of the drum over time can be removed by grinding with our machine. In this way, you can get a surface as if it were new. The turning process can be done automatically or manually. Thanks to the locking function of the disc lathe, the disc can also be turned if necessary.
Product code: KTM1000
Brake Calliper Socket and Bit Socket Set, 17pcs
17-piece socket and bit set for brake caliper disassembly. Includes hex, 10-point, 7-point, and pentagon sockets for models by Audi, BMW, Ford, Mercedes-Benz, Porsche, and more.
Product code: BGS-74283
Brake Caliper Socket Set, 11, pcs
11-piece socket set for brake caliper disassembly during brake pad replacement. Compatible with multiple car brands.
Product code: BGS-6697
Break piston removal tool
Essential tool for retracting the brake piston to allow insertion of new brake pads.
Product code: CKB04066
Brake piston presser. Max 70mm jaw spread.
Essential tool for pressing in the brake piston to allow insertion of new brake pads.
Product code: G02534
Brake fluid tester pen
Quick and easy method to accurately gauge the moisture content of all types of brake fluid.
Product code: G02731
Brake system bleeding set
Pneumatic brake system bleeding set.
Product code: G02732
Hand held vacuum pump
Accepts many kinds of adapters to fit most types of vehicles. The body has a switch to control two kinds of pressure conditions. Pressure ranges: positive pressure 0-60psi (1-4inhg) and negative pressure 0-30psi (0 to -1inhg).
Product code: CHS-A998A
Dial indicator - metric version
The dial indicator is an element of industrial automation. It is used to check the geometrical shape of a given element and the proper preparation of the element for work on a given machine. It is mostly used in metalworking and the automotive industry but we can use in construction, research and development where high precision measurements are required.
Product code: CKB03578
Professional dial gauge with magnetic base holder
Measuring the brake system is easier and more accurate than ever with the professional indicator watch magnetic base holder. The magnetic base ensures the fit, and the contact point detects even the smallest deviations. The dial pointer and the polished chrome control lever help with precise adjustment. The magnetic base can be easily removed with the on/off lever. Quickly check brake system play with this tool.
Product code: CKB03577
Tube flaring tool set with pipe cutter
Tube flaring tool set with pipe cutter. For tube sizes: 5, 6, 8, 10, 12, 14, 18mm.
Product code: G02722
Tube double flaring tool set, 10pcs
Tube double flaring tool set, 10pcs, tube sizes: 3/16", 1/4", 5/6", 3/8", 7/6", 1/2", 5/8"