
Timing tool set Audi A8 3.7 / 4.2 V8 (engine ABZ, AEW, AHC)
Product code: W0227
Brand: Lincos

Product description
Description
- Timing tool set
Suitable for
- Audi A8 3.7 / 4.2 V8
Motorcodes
- ABZ, AEW, AHC
Product packing
Pack number | Dimensions | Weight |
---|---|---|
1 | 17 x 18 x 6 cm | 1.1 kg |
Delivery fee
Delivery method | Gross price |
---|---|
Pickup in Nagytarcsa | 0,00 € |
Pickup in Debrecen | 0,00 € |
DHL Worldwide Express | 72,56 € |
More products in this category

Fuel pump nut wrench for Fiat, Citroen, Peugeot
Fuel pump nut wrench for Fiat Ducato, Citroen Jumper, Peugeot Boxer.
Product code: W0620

Puller arm forward bushing Renault Laguna I (under a hydraulic press)
Puller arm forward bushing Renault Laguna I (under a hydraulic press) (nr. oe 77 00 822 503)
Product code: W0170

Puller arm forward bushing Renault Laguna I
Puller arm forward bushing Renault Laguna I (nr. oe 77 00 824 042)
Product code: W0171

Rear beam bushing puller BMW E32 / E34 (nr. oe 3331112670)
Rear beam bushing puller BMW E32 / E34 (nr. oe 3331112670)
Product code: W0181

Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot
Puller front lower control arm bushings Fiat / Alfa Romeo / Citroen / Peugeot
Product code: W0195

Puller injection pump Vw Seat skoda 1.6 / 2.0 TDI CR
Product code: W0586

Tool to adjust the variable cam timing Vanos BMW M60, M62 V8 Land Rover
Product code: W0678

Insulated screwdriver set, 8pcs, 1000V
Fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1000V. (SL: 3x75mm, 4x100mm, 5.5x125mm, 6.5x150mm - PH: 0x75mm, 1x80mm, 2x100mm - Voltage tester: 140mm, SL 0.5x 3.0mm)
Product code: JBM15162

Drain plug wrench
Drain plug wrench. Square heads 8mm and 10mm. For vehicles Citroën, Renault, Peugeot.
Product code: JBM52617

Panel removal tool set, 27pcs
27pcs panel removal tool set. Material: very hard, special plastic. Suitable for working on doortrims, body line mouldings, O-rings
Product code: JBM52788

Timing tool set Audi 3.6 / 4.2 V8
Timing tool set Audi 3.6 / 4.2 V8
Product code: W0268

Auto fuse assortment, 120pcs
120pcs auto fuse assortment, 20pcs 5A, 20pcs 10A, 20pcs 15A, 20pcs 20A, 20pcs 25A, 20pcs 30A
Product code: JBM53356

52pcs radio release tool kit
Wrenches, hooks, suitable for Kenwood 1998-2001, Sony II 2002, Kenwood III 2002, Pioner + JVC, Sony I 2001, Sony Idic 2005, Panasonic 2006, Kenwood I 1998, Kenwood Mask, Blaupunkt, Grundig
Product code: JBM53388

Stud remover
Stud remover, capacity 6.35-20mm.
Product code: MG50047

Flywheel and camshaft locking pin set, universal
Flywheel and camshaft locking pin for diesel and petrol engines.
Product code: MG50088

Valve grinder, wooden
Valve grinder, wooden, with suction cups, sizes: 5/8", 13/16", 1 1/8", 1 3/8"
Product code: MG50104

Special socket set for A/C and ECU repair
For special safety screws. Suitable for A/C units for MAFs, for ECUs, for the injector air supply, for mass sensors.
Product code: MG50128

Petrol engine compression test kit, 0-20bar
Suitable for passenger cars and motorcycles, double scale gauge 0-20bar (0-290psi), adapters M10, M12, M14 (64, 94mm), M18
Product code: MG50184

Cylinder leakage tester
Quickly determines piston, ring and valve faults. Measuring range 0-7bar (0-100psi), spark plug adapters 10, 12, 14mm
Product code: MG50185

Oil pressure tester kit, hose with quick couplers, 10 adapters
For oil pump, pressure tester, oil pressure switch testing. Hose with quick couplers, with 10 adapters
Product code: MG50188

Timing tool set for Renault, Opel, Nissan
For 1.5, 1.9, 2.2, 2.5 DCI, DT engines
Product code: MG50306

Bushing injection pump BMW Common-Rail 2.0d N47 / N47S (06-10)
Product code: W0282

Timing lock Ford 1.6 Ecoboost SCTi / Ti-VCT Ecoboost
Product code: W0703

Timing tool set for BMW, Land Rover, Opel 2.5 TD5
Timing tool set for BMW, Land Rover, Opel 2.5 TD5 diesel engines.
Product code: MG50311

Timing tool set for Ford
For 2.0, 2.2, 2.4 TDDI, TDCI, engines with timing chain
Product code: MG50325

Timing tool set for Opel, Nissan, Dacia, Renault
2.2, 2.5 DCI, DTI Renault, 2.2 16V petrol engines
Product code: MG50345

Injector puller tool set, with slide hammer
Injector puller tool set, with slide hammer. For Delphi, Bosch, Denso, Siemens injectors
Product code: MG50348

Combined socket set for alternator, 13pcs
Combined socket set for alternator, 13pcs
Product code: MG50352

Wrench for injection pump, electromagnetic, Ford Ford 1.8i, 2.0, 2.2, 2.4 TDCi | TDDDi
Product code: W0706

Injector removing tool set VAG FSI
Injector removing tool set VAG FSI
Product code: MG50363

Timing tool set for BMW, Mini, PSA
BMW Mini camshaft, flywheel locking tools, timing chain tensioner, for 1.4, 1.6 V16 petrol engines
Product code: MG50390

Wheel Bearing tool VW
Bearing installation and removal tool for 85mm bearings. Application Volkswagen Touareg, Transporter, Multivan & T5
Product code: MG50432A

Ball joint separator tool set, replaceable heads, 20, 22, 24, 27, 30mm
Ball joint and tie rod separator tool set, capacity 20, 22, 24, 27, 30mm
Product code: MG50436

SAC clutch alignment tool set
SAC clutch alignment tool set, ensures quick removal and precise installation. 3- and 4-hole division
Product code: MG50442

Copper washer removal tool for diesel injector
Copper washer removal tool for diesel injector, length 230mm
Product code: MG50629

BMW Common Rail injector puller set
Allows to remove the injector without disassembling the cylinder head. For BMW M47TU, M57, M57TU engines.
Product code: MG50630

Timing tool set for Alfa Romeo, Fiat, Lancia
For Alfa Romeo, Fiat, Lancia 1.4, 1.6, 1.8, 2.0 engines
Product code: MG50632

Camshaft timing tool set for BMW, N42, N46, N46T
Camshaft timing tool set for BMW, N42, N46, N46T
Product code: MG50659

Mercedes-Benz, BMW Visco cooling fan clutch tool set
Special tools for Mercedes Benz, BMW, Ford cooling fan clutches, water pumps
Product code: MG50702

Special wrench for turbocharger
Special wrench for turbocharger, 3/8", 12-pt, size: 12mm
Product code: MG50800

Puller for suspension arm sleeve, Cinquecento,Seicento
Puller for suspension arm sleeve, Cinquecento,Seicento
Product code: W0004

Universal AC clutch remover
Universal disc with a centering mandrel for the removal of car air conditioning clutches.
Product code: W0013

Wrench for alternator, VW, Audi, Mercedes (length 30mm, width 19.6mm)
Wrench for alternator, VW, Audi, Mercedes (length 30mm, width 19.6mm)
Product code: W0015

Valve spring removal tool for 8V, 12V, 16V engines
Valve spring removal tool for 8V, 12V, 16V engines.
Product code: W0024

Timing tool set for Fiat Multijet and Opel CDTI engines
Timing tool set 1.3 CDTI/JTD (Fiat Multijet, Opel CDTI).
Product code: W0025

Press for silents and ball joints, for VW T4, Mercedes Sprinter, VW LT
Press for mounting and removing silents in the suspension arm in VW T4, VW LT and Mercedes Sprinter 1999-2006 without having to remove the arm from the vehicle.
Product code: W0027

Adapter + screw of injector puller, Mercedes CDI, VW TDI; Bosch
Adapter + screw of injector puller, Mercedes CDI, VW TDI; Bosch
Product code: W0029

Timing tool set for Opel 1.0, 1.2 DOHC twin cam engines
The kit allows to set and lock the camshafts In Opel Agila, Astra-G, Corsa-B, Meriva 1.0, 1.2 12V twin cam ecotec engines.
Product code: W0030

Beam puller for timing wheels
Beam puller for timing wheels
Product code: W0033

Timing tool set for Audi, Seat, Skoda, VW 1.4, 1.6 16V petrol engines
It is used to set the correct position of the camshafts on 1.4 and 1.6 petrol engines with double camshafts.
Product code: W0032

Adapter for injector pulling, Mercedes CDI (hardened)
Adapter for injector pulling, Mercedes CDI (hardened)
Product code: W0053

Inertial puller for car injectors, CDI
Inertial puller for car injectors, CDI
Product code: W0061

Inertial puller for car injectors, CDI and others, with 3 axles
Inertial puller for car injectors, CDI and others, with 3 axles (200mm, 240mm, 280mm)
Product code: W0063

Silent puller for BMW E38, E39, E60, E63, E65, E53, X5, Z8 passanger cars
Extractor for removing and fitting the silent block on the rear axle link arm on BMW passanger cars.
Product code: W0087

Set for dismantling of injectors, Bosch and others
Set for dismantling of injectors, Bosch and others
Product code: W0091

Press for upper bolts T4, Master, Movano, Interstar and lower bolts Sprinter, VW LT
Press for upper bolts T4, Master, Movano, Interstar and lower bolts Sprinter, VW LT
Product code: W0093

Sleeve puller, rear beams, BMW E39 sedan
Sleeve puller, rear beams, BMW E39 sedan
Product code: W0096

Adapters for press, puller for bolts, Master, Movano, Interstar
Adapters for press, puller for bolts, Renault Master, Opel Movano, Nissan Interstar
Product code: W0102

Set of wrenches for injection pumps, 5 pcs of special wrenches
Set of wrenches for injection pumps, 5 pcs of special wrenches
Product code: W0108

Timing Lock Ford, Peugeot, Volvo - 2.0, 2.2 D
Product code: W0300

Camshaft locking tool Fiat 1.2 8V
Camshaft locking tool Fiat 1.2 8V
Product code: W0120

Universal wiper arm puller
Universal wiper arm puller. Two paws type.
Product code: W0123

Camshaft locking tool for Fiat 1.4 Fire Evo
Camshaft locking tool for Fiat 1.4 Fire Evo petrol engines.
Product code: W0124

Camshaft locking tool BMW Common Rail 2.0 d, 3.0d (TU)
Camshaft locking tool BMW Common Rail 2.0 d, 3.0d (TU) with rack and pinion drive wheels.
Product code: W0126

Puller Injectors Citroen Peugeot 1.6 HDI
Product code: W0314

Timing tool set Ford 1.6 /1.8 / 2.5 D/TD
Timing tool set Ford 1.6 /1.8 / 2.5 D/TD
Product code: W0128

Camshaft locking tool VAG, VW, Ford 2.3, 2.8, 2.9 (1991-2005), steel
Camshaft locking tool VAG, VW, Ford 2.3, 2.8, 2.9 (1991-2005), steel
Product code: W0130

Lock camshaft BMW M40, M43 models E30, E34, E36
Lock camshaft BMW M40, M43 models E30, E34, E36
Product code: W0139

Sleeve puller for control arm rear axles for Fiat, Opel, Saab etc.
Sleeve puller for control arm rear axles for Fiat, Opel, Saab etc.
Product code: W0142

Adapter for testing fuel injection Diesel trucks
Adapter for testing fuel injection Diesel trucks - MAN 0826, 0824
Product code: W0144

Flywheel locking tool set Ford Mazda Volvo
Flywheel locking tool set Ford Mazda Volvo petrol engines (1991-2010), 1.4 / 1.6 / 1.7 / 1.8 / 2.0 16V
Product code: W0148

Timing tool set Renault 1.2, 1.4, 1.6 1.8, 2.0, 2.0 16v Turbo, 1.5 dCi
Timing tool set Renault 1.2, 1.4, 1.6 1.8, 2.0, 2.0 16v Turbo, 1.5 dCi
Product code: W0156

Press, puller for bolts, 20 adapters Master, Movano, Iveco, Vw Lt etc.
Press, puller for bolts, 20 adapters Master, Movano, Iveco, Vw Lt, Ctrafter, Sprinter
Product code: W0162

Sleeve puller, rear beams BMW E39 (sleeve oe no. 3317 1090 389)
Sleeve puller, rear beams BMW E39 (sleeve oe no. 3317 1090 389)
Product code: W0165

Timing tool set, Ford, Mazda, Diesel 1.8 TDCi, TCI
Timing tool set, Ford, Mazda, Diesel 1.8 TDCi, TCI
Product code: W0178

Adapter for injection units pulling, Fiat Ducato 2.3 JTD 15.5 mm
Adapter for injection units pulling, Fiat Ducato 2.3 JTD 15.5 mm
Product code: W0184

Puller sleeve (only for pressing) of the rear beam Citroen, Peugeot
Puller sleeve (only for pressing) of the rear beam Citroen C4, Peugeot 307.
Product code: W0186

Timing tool set BMW / Rover Diesel Common Rail System
Timing tool set BMW / Rover Diesel Common Rail System
Product code: W0188

Tensioning key Fiat / Alfa Romeo / Lancia (male)
Tensioning key Fiat / Alfa Romeo / Lancia (male)
Product code: W0201

Injector removal set for Mercedes A Class CDI
Injector removal set for Mercedes A Class CDI
Product code: W0206

Timing belt tensioner key, Chrysler Voyager, Jeep Cherokee 2.5, 2.8 CRD
Timing belt tensioner key, Chrysler Voyager, Jeep Cherokee 2.5, 2.8 CRD diesel engines
Product code: W0219

Injection pump gear removal BMW, Opel, Land Rover
Injection pump gear removal BMW, Opel, Land Rover
Product code: W0229

Dial strip Opel Kadett, Astra, Vectra, 1.6 / 1.7 - Diesel
Dial strip Opel Kadett, Astra, Vectra, 1.6 / 1.7 - Diesel
Product code: W0245

Injector puller set 1.5 DCI Delphi (14x1.5) Renault, Nissan
Injector puller set 1.5 DCI Delphi (14x1.5) Renault, Nissan
Product code: W0247

Timing tool set Citroen / Peugeot 2.0 16V with variable phase timing
Timing tool set Citroen / Peugeot 2.0 16V with variable phase timing
Product code: W0255

The key to the water pump timing belt tensioning- Opel / Daewoo / Chevrolet 46mm
The key to the water pump timing belt tensioning- Opel / Daewoo / Chevrolet 46mm
Product code: W0258

Timing tool set, Volkswagen, Audi, Seat 1.9 SDI / TDI
Timing tool set, Volkswagen, Audi, Seat 1.9 SDI / TDI
Product code: W0259

Timing tool set Mini One, Cooper 1.6, Cooper 1.6s, petrol, chain
Timing tool set Mini One, Cooper 1.6, Cooper 1.6s, petrol, chain
Product code: W0264

Timing tool set Opel Vectra C 2.8 V6 timing chain, petrol
Timing tool set Opel Vectra C 2.8 V6 timing chain, petrol
Product code: W0266

Timing tool set Audi VW Skoda Seat 2.4, 2.7, 2.8, 3.0 V6 30V
Timing tool set Audi VW Skoda Seat 2.4, 2.7, 2.8, 3.0 V6 30V
Product code: W0269

The key to lock the crankshaft Volkswagen Audi Skoda 1.4-1.6 16V petrol
The key to lock the crankshaft Volkswagen Audi Skoda 1.4-1.6 16V petrol
Product code: W0275

Tool for setting the oil pump Ducato, Iveco, Citroen Jumper - 2.3 Diesel CR
Product code: W0278

Cam lock VW, Seat, Skoda and Audi 1.2 TSI, TFSI engines
Cam lock tool for VW, Skoda, Seat, Audi 1.2 TSI chain driven petrol engines.
Product code: W0292

Cam lock FORD 1.6 Ti-VCT petrol set
Product code: W0297

Flywheel engines FORD diesel and petrol
Product code: W0298

Cam lock Renault 16V / 2.5 20V Volvo 1.6/1.8/1.9/2.0/2.2/2.3/2.4/2.5 (bar)
Product code: W0301

Camshaft lock for Land Rover / Jaguar Diesel 2.0 Tdi, 2.5 Tds, 2.7 TDV6
Camshaft lock for Land Rover / Jaguar Diesel 2.0 Tdi, 2.5 Tds, 2.7 TDV6
Product code: W0302

The key to lock the crankshaft VW / Audi / Seat / Skoda 1.8 TDI TFSI
Product code: W0303

Cam lock Citroen / Peugeot 1.4 16V "ET"
Product code: W0358

Adapters Bolt crossover top Jeep - Cherokee, Grand Cherokee, Wrangler
Product code: W0312

Press the upper crossover pins Jeep Cherokee, Grand Cherokee, Wrangler
Product code: W0313

Adapter for pulling Denso injectors for Toyota 2.2 170hp engines
Adapter for pulling Denso injectors for Toyota 2.2 170hp engines
Product code: W0320

Camshaft Lock Volkswagen Audi 2.6, 2.8 V6 / V8
Product code: W0322

Puller bushings rear beam Renault Laguna II set (5 adapters to org and not of original sleeves)
Product code: W0330

Camshaft lock (locking plates) for Renault, Nissan, Opel 2.2, 2.5 dCi
A timing setting tool (setting plates) for Renault, Opel, Nissan 1.5, 1.9, 2.2, 2.5 dCI engines.
Product code: W0335

Lock injection pump Mercedes Benz Diesel OM 601, OM 602, OM 603
Product code: W0367

Lock (pin; adapter) timing Renault / Opel / Nissan 1.9 DCI
Product code: W0342

Puller arm bushing rear Fiat Bravo II (No.sleeves 50700796 )
Product code: W0377

Adapters for mounting and dismounting the front control arm bolts Renault Scenic II; Grand Scenic II; Megane II; Dacia Logan
Product code: W0353

Puller sleeve rear beam Renault Megane II; Scenic II; Grand Scenic II (oe sleeve 7701479190)
Product code: W0379

Lock timing Ford 1.8, Mazda 2.0 / 2.3 turbo
Product code: W0373

Lock timing Ford Mondeo, Focus, C-Max 2.0 EcoBoost after 2010
Product code: W0375

Denso injector valve wrench
3-pin key for removing and installing the return valve on Denso Common Rail diesel injectors.
Product code: W0391

Lock camshaft Opel Corsa D 1.0
Product code: W0402

Crankshaft rear oil seal replacement tool for Iveco, Fiat 2.3
Crankshaft rear oil seal (gearbox side) replacement tool for Iveco, Fiat 2.3
Product code: W0438

Key locking the crankshaft Ford Mondeo, Transit 2.0 2.2 2.4 3.2 Duratorq TDCi (01-)
Product code: W0407

Injection pump removal tool for BMW N47, N47S Common Rail engines
Pinion extractor for diesel injection pumps in BMW N47, N47S and N57 1.8d, 2.0d, 2.5d, 3.0d engines manufactured in 2007 - 2015. This extractor is compatible with new generation BMW engines that have the distribution in the back (at the flywheel).
Product code: W0423

Adapter puller valve springs 20V
Product code: W0441

The key to rotate the pulley shaft BMW N47 / M57
Product code: W0498

Lock and pulley puller Jaguar and Land Rover
Product code: W0525

Rear beam puller for Opel Corsa B, C, Tigra (oe bushes 24443815; 5402636)
Product code: W0539

Injection pump gear puller for KIA, Hyundai 2.0, 2.2 CRDI
This tool allows the fuel pump sprocket to be pulled from the pump. Essential for sprocket removal.
Product code: W0541

Lock the timing of VW, Audi, Seat, Skoda - 2.0 FSI / TFSI – petrol
Product code: W0554

Key to the oil plug Volkswagen, Audi, Seat, Skoda TSI; TFSI
Product code: W0581

Camshaft lock for Mercedes Benz M642, 3.0 24v V6
Timing lock for Mercedes Benz M642, 3.0, 24v, V6 diesel engines.
Product code: W0600

The key to the timing belt tensioner VW, Audi, Skoda 1.4 TSI / TFSI 16mm
Product code: W0597

Injection pump removal tool for Renault, Opel, Nissan 2.2, 2.5 DTI, CDTi
A tool to remove the diesel pump sprocket to allow the removal of the fuel pump without disturbing the timing belt on Renault 2.5 and 2.2 diesel engines found in Renault, Opel and Nissan vans.
Product code: W0602

Variator key for VAG 1.4, 1.6 TSI and TFSI engines
Variator key for VW, Audi, Seat, Skoda 1.4, 1.6 TSI and TFSI engines.
Product code: W0603

Puller gear injection pump Peugeot Citroen Toyota 1.6 HDI
Product code: W0697

Timing box cover tools for Ford 1.8 TDCI, TDDI
Timing box cover tools for Ford Focus, C-Max, Tourneo Connect, Mondeo, Transit Connect 1.8 TDCI, TDDI.
Product code: W0635

Viscous clutch key for Mercedes Sprinter 3.0 V6 CDI
Viscous clutch key for Mercedes passenger cars with 3.0 V6 CDI and 4.0 V8 CDI engines.
Product code: W0641

The cap / wrench for loosening the hub nut Land Rover DEFENDER 1999-2016. ( nut number RFD100000)
Product code: W0642

Injection pump puller for Hyundai and KIA 1.6 CRDi engines
Injection pump puller for Hyundai and KIA 1.6 CRDi engines.
Product code: W0683

Key clutch disc air conditioning Denso 28 mm (hardened)
Product code: W0666

Wrench for unscrewing the nut of the injector unit body Vw, Audi 2.0 - Siemens (30mm)
Product code: W0709

The key to block the Ford A / C compressor pulley
Product code: W0711

The key to blocking the Ford Transit air conditioning pulley
Product code: W0713

Hot stapler plastic repair set
Hot stapler plastic repair set. Easy-to-use tool for quick and efficient repairing.
Product code: 804064

Universal camshaft pulley locking tool set, hardened
Universal camshaft pulley locking tool set, hardened
Product code: W0132

Camshaft lock for BMW M52 M54 M56 M52TU engines
Camshaft lock for BMW M52 M54 M56 M52TU engines.
Product code: C01/0033

Piston ring expander, 120-160mm
Piston ring expander, clamping capacity 120-160mm
Product code: MG50335C

Timing tool set for Fiat
Timing tool set for Fiat 1.2 16V petrol engines
Product code: MG50308

Hex key for Bosch injector valve
H10 hex wrench with a 7.5mm hole for disassembly of Bosch injector valves.
Product code: C04/0087

Exhaust pipe expander
Sizes: 29-44mm (1 1/8"-1 3/4"), 38-62mm (1 1/2"- 2 7/16"), 54-87mm (2 1/8"-3 7/16")
Product code: MG50076

Duplex clutch repair kit for VAG DSG transmissions
Special tools for repair work on DSG transmissions for assembling and disassembling the clutch housing.
Product code: JBM53057

Piston ring compressor 3", 53-175mm
3" piston ring compressor. Ø 53/175mm
Product code: JBM52696

Press the down crossover pins Jeep Cherokee, Grand Cherokee, Wrangler
Product code: W0399

Tool for setting the bearings of the VW Audi 7 speed DSG gearbox
Product code: W0692

Key to the oil filter Toyota, Lexus, Scion 80 mm
Product code: W0687

Adapter for pulling the injectors 2.0 HDI Delphi (12mm) ( Delphi 28388960 )
Product code: W0663

Camshaft locking tool for Mercedes M271, C200, C180, E260
Use this tool to accurately position and align the TDC to fix the camshaft in the timed position (direct center), so that the cam phaser can be effectively removed while tightening and loosening the phaser bolt. (Note that the camshaft must be aligned when removing and installing the timing chain)
Product code: W0662

Puller synchronizer gearbox Volvo AT03112C
Product code: W0649

Timing lock Jaguar, Land Rover 4.0, 4.2, 4.4 petrol by 2010
Product code: W0609

The keys for locking the pulley shaft Mercedes M112, M113, M271, M272, M273, M642
Product code: W0604

Timing lock for BMW E30, E36, E46, E34, E39, E38 engines
Timing lock for BMW M42, M44, M50, M52, M54, M56, M52TU, S50US, S52US.
Product code: W0595

The key pulley shaft Opel 1.6 SIDI gasoline
Product code: W0511

Lock timing BMW M52 M54 M56 M52TU VANOS
Product code: W0480

Lock timing Mercedes 2.0 2.1 2.2 CDI set
Product code: W0477

Puller sleeve rear beam Mercedes S Class W220 C215 (oe numbers 220 351 11 42 221 350 01 75)
Product code: W0453

Crankshaft front oil seal puller for Iveco 3.0
Crankshaft front oil seal puller for Iveco 3.0
Product code: W0434

Lock the timing VW Transporter 2.4D (95-03), Volkswagen Crafter 2.5 TDi (06-09)
Product code: W0408

Puller Injector HDI Siemens M25 x 1 (hardened)
Product code: W0394

Puller injection pump sprocket Renault 1.9 D / TD / Volvo / Opel
Puller injection pump sprocket Renault 1.9 D / TD / Volvo / Opel
Product code: W0274

Puller / press sleeve "candy" longitudinal link back FORD Focus
Puller / Press sleeve "candy" longitudinal link back FORD Focus (Oe: 1061670 or 98AG-5K896-AB)
Product code: W0230

Sleeve puller, Golf IV, Audi A3, Skoda Octavia for the sleeve FEBI
Sleeve puller, Golf IV, Audi A3, Skoda Octavia for the sleeve FEBI
Product code: W0172

Central bolt puller upper arm VW, Audi after 2005
Central bolt puller upper arm VW, Audi after 2005
Product code: W0164

Rear Suspension Bush Puller Ford Mondeo
Rear Suspension Bush Puller Ford Mondeo
Product code: W0020

Lock Flywheel Renault 1.2 / 1.6 Petrol, 1.9 D / TD
Product code: W0327

Timing tool set, Fiat and Iveco 2.3, 3.0 JTD
Timing tool set for Fiat and Iveco 2.3, 3.0 JTD engines.
Product code: W0078

Timing tool set for VW, Audi, Skoda 2.4 - 2.8, 3.7, 4.2 engines
Timing tool set for VW, Audi, Skoda 2.4, 2.5, 2.6, 2.7, 2.8, 3.7, 4.2 V6, V8 diesel and petrol engines.
Product code: W0019

Non-marring hook, pick and prying tool set, 6pcs
This set allows you to remove, clean, and work on trim clips, oil seals, grommets, O-rings, air vent assemblies, tight gaps in interior automotive compartments, delicate wiring, composite electrical connectors, and other sensitive finished components.
Product code: JBM54142

Puller for wheel hub / bearing VW Polo, Seat, Skoda, Audi A2-puller with ABS and without ABS
Product code: W0306

Puller bushings rear beam Renault Laguna II (to no of original sleeves with flat his back)
Product code: W0329

Adapters to bolts down Jeep - Cherokee, Grand Cherokee, Wrangler
Product code: W0398

Universal tool for brake pistons pushing – front
Universal tool for brake pistons pushing – front
Product code: W0003

Timing lock set for Opel 1.0, 1.2, 1.4 petrol engines with timing chain
Timing lock set for Opel and Chevrolet 1.0, 1.2, 1.4 petrol engines with timing chain (2010-).
Product code: C01/0028

Wishbone lever tool
Wishbone lever tool, Length: 1180mm, Tube: Ø 3.5cm, Brace distance: 50 - 45 - 40 - 35 - 30cm, Fastening support: 15 x 13cm
Product code: JBM51902

Timing lock for BMW chain pulley 2.5 and 3.0 engines N53, N54
Timing lock for BMW chain pulley 2.5 and 3.0 engines N53, N54.
Product code: C01/0073

Engine timing lock for Ford 2.0 and 2.4 diesel engines
Engine timing lock for Ford 2.0 and 2.4 diesel engines.
Product code: C01/0074

Bearing and gear puller with 3 jaws. Working range: up to 12" (305mm)
Bearing and gear puller with 3 jaws. Working range: up to 12" (305mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.
Product code: G02235

Cylinder pressure test set
A tester that allows you to quickly and easily diagnose leaks in the combustion chamber.
Product code: G02735

Suspension support rod measuring tool
The device is designed for precise measurements of the curvature of the front suspension support pipes. Dial indicator not included.
Product code: C06/0212

Puller to the hub / bearings VW T5
Puller to the hub / bearings VW T5
Product code: W0129

Adapter to pull the injector Opel Fiat Alfa Romeo 1.9 JTD (hardened )
Product code: W0281

Puller for wheel hub / bearing Ford Focus II, C-Max, Volvo, Mazda 3,-puller with ABS and without ABS
Product code: W0305

Lock Belt VW / Audi / Seat / Skoda 1.8 FSI / TFSI
Product code: W0317

Puller sleeve rear beam, RENAULT LAGUNA III , Renault Laguna Coupe
Product code: W0503

Pin to the crankshaft Ford Fiesta 1.25, 1.4, 1.6 Zetec, Duratec
Product code: W0406

Key - Lock crankshaft pulley Honda
Product code: W0308

Press the king pins the upper and lower Jeep - Cherokee, Grand Cherokee, Wrangler
Product code: W0401

Bearing and gear puller with 3 jaws. Working range: up to 10" (254mm)
Bearing and gear puller with 3 jaws. Working range: up to 10" (254mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.
Product code: G02245

Self-adjusting crimping tool, 0.25 - 10mm²
Self-adjusting crimping pliers for conductor end-sleeves. Wire ferrules are crimped onto a stranded wire in a four point crimp profile, protecting the fine strands from fraying, and then it is inserted into the terminal compartment.
Product code: G01772

Pneumatic ATF and oil filling pump set for gearboxes, 15pcs
Pneumatic ATF and oil filling pump set for gearboxes, 15pcs. For Ford, BMW, Honda, Nissan, VW, Audi, Skoda, Porsche, Mini Cooper, Mercedes Benz, Honda, Hyundai, Kia, Nissan, Infinity, Volvo, Toyota, Lexus.
Product code: G02117

Bearing and gear puller with 3 jaws. Working range: up to 8" (203mm)
Bearing and gear puller with 3 jaws. Working range: up to 8" (203mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.
Product code: G02244

Puller for suspension arm sleeves – front, BMW E 39 M5
Puller for suspension arm sleeves – front, BMW 5 (E39), 01.96-06.04 535i/540i/M5 BMW 7 (E38), 04.94-12.01
Product code: W0086

Wrench for damper pin locking/unscrewing, Ducato, Jumper, Boxer
Wrench for damper pin locking/unscrewing, Ducato, Jumper, Boxer
Product code: W0090

Puller sleeves rear beam / bridge Mercedes W210, W202, W203, W140 (OE 129 351 21 42)
Product code: W0424

Internal bearing puller set
Internal bearing puller 10-32 mm. A professional set, necessary in every workshop.
Product code: CKB04004

Puller sleeve for BMW bushings
Pulling tool for the assembly and thedisassembly of bushings on the car. BMW: 5 (E60), 5 Touring (E61), 6 (E63), 6 convertible (E64).
Product code: W0519

Universal press and pull sleeve kit, 34-82mm
Spindle: M10, M12, M14, M16, M18, Adapters (Outer/inner diameter): 74/54mm, 76/56mm, 78/58mm, 72/52mm, 70/50mm, 68/48mm, 80/60mm, 82/62mm, 66/46mm, 64/44mm
Product code: JBM52494

Fish tape, 30m, green
30m steel cable fish tape in plastic green case. Flat metal tape, size 3x1mm. Insertion head size 40x10x3mm.
Product code: FT100-GREEN

Universal bearing removing/installing kit, 34-84mm
Spindle: M10xP1.5, M12xP1.75, M14xP2.0, M16xP2.0, length/Ø A 44/34, 46/36, 54/44, 56/46, 58/48, 66/56, 68/58, 70/60, 78/68, 80/70, 84/72, B 48/38, 50/40, 52/42, 60/50, 62/52, 64/54, 72/62, 74/64, 76/66mm
Product code: MG50093

Front wheel drive kit, 55.5-91mm, axle 380mm
Sizes(d) 55.5, 59, 62, 65, 66, 71.5, 73, 78, 84, 86, 91mm, axle 380mm
Product code: MG50405

A/C clutch hub removal tool, 21mm (hardened)
Fits universally for Audi, BMW, Mercedes-Benz, Porsche, Smart, Volkswagen, Skoda, Seat, Cadillac, Chevrolet, Vauxhall, Ford, Dodge, Jeep, Alfa Romeo, Fiat, Lancia, Opel, Suzuki, Peugeot, Citroen, Renault, Mitsubishi, Toyota, Puch, Proton, Hyundai, etc. models and makes.
Product code: W0445

Sleeve puller suspension arms, front BMW E39
Sleeve puller suspension arms, front BMW E39 - 520d, 520i, 523i, 535d, 525i, 525td, 525tds, 528i
Product code: W0057

Oil filter strap wrench 95-110mm
Band wrench for replacing oil filters in cars and vans. It is designed for automotive repair.
Product code: G02563

Pneumatic CV boot installation tool (8bar)
The CV boot installation tool is to be used solely for the stretching of flexible CV boots onto drive-shaft assemblies of automotive vehicles.
Product code: JBM52994

14pcs E4-E24 Torx socket set
14pcs E4-E24 Torx socket set. Use with 1/2", 3/8", 1/4" drives.
Product code: G13566

Drum brake pliers
Drum brake pliers. For removing and installing return springs on drum brakes.
Product code: JBM52625

Valve-spring compressor tool set
High capacity valve-spring compressor tool, for passenger cars, adjustable rod and arm
Product code: MG50103A

Radio removal tool set
Radio removal tool set, 20pcs
Product code: JBM51126

Injector puller with sliding hammer for Mercedes CDI injectors
Injector puller with sliding hammer for Mercedes CDI injectors in OM611, 612 and 613 engines.
Product code: C04/0095WF

Vacuum/pressure test kit
Vacuum range 0-1bar, pressure 0-3bar, tank (2x120ml), hose 600mm, couplers, adapters
Product code: MG50411

Valve stem seal pliers
For replacing valve stem seals.
Product code: MG50106

Windshield removing tool set
For damage-free removal and separation of windshields and trims. Inner, outer windshield blade, steel wire, wire feeder tool, trim pad remover
Product code: MG50220

Fuel pump removal/installer tool
Fuel pump removal/installer tool, adjustable: 76-160mm
Product code: MG50644

Belt pulley wrench for BMW diesel engines
Belt pulley wrench for BMW diesel engines.
Product code: C01/0100

Brake system bleeding set
Pneumatic brake system bleeding set.
Product code: G02732

Puller for replacement hydraulic tappets - Opel 8V
Product code: W0307

Sleeve puller, Golf IV, Audi A3, Skoda Octavia
Sleeve puller, Golf IV, Audi A3, Skoda Octavia
Product code: W0006

Timing belt tightener for VAG car engines
Timing belt tensioner wrench for VAG car engines.
Product code: W0039

Wrench for alternator coupler, VALEO-Renault, Volvo (hardened)
Wrench for alternator coupler, VALEO-Renault, Volvo (hardened)
Product code: W0052

Press for dismantling and mounting of lower bolts, IVECO
Press for dismantling and mounting of lower bolts, IVECO
Product code: W0115

Universal puller (screw L=100mm, hole distance 27-62mm)
Universal puller (screw L=100mm, hole distance 27-62mm)
Product code: W0136

Adapters for press, puller for bolts VW T4, LT, Mercedes Sprinter
Adapters for press, puller for bolts VW T4, LT, Mercedes Sprinter
Product code: W0147

Oil drain repair cutter, Volkswagen
Oil drain repair cutter, Volkswagen
Product code: W0166

Radiator pressure tester kit, 8 adapters
Radiator pressure and leakage tester kit, suitable for almost all car types
Product code: MG50180

Wrench for injection pumps, hexagon 13mm
Wrench for injection pumps, hex 13mm, drive diam. 12mm, 9x7mm rectangular fixing, hardened
Product code: W0234

Timing tool set Fiat Bravo, Brava, Marea, Lancia Delta, Debra 1 set
Timing tool set Fiat Bravo, Brava, Marea, Lancia Delta, Debra 1 set. - Petrol 1.8 16V 115 PS (green)
Product code: W0240

Lock camshaft Chrysler 2.8L Diesel after 2007
Product code: W0355

Sleeve puller for Ford Mondeo MK 4 (2007- ) rear swingarm
Tool for assembly and disassembly of the sleeve without the need to disassemble the swingarm.
Product code: W0364

Puller sleeve rear beam Opel Zafira A; Astra G; Combo; Meriva A (oe number 402644)
Product code: W0371

Lock Timing BMW 2.5 / 3.0 Petrol; Engines N51, N52, N52K, N53, N54 (timing chain)
Product code: W0382

Tool to block the balance shafts BMW N40, N42, N45, N46
Product code: W0417

Puller adapter for Denso M25x0.5 Toyota and Mazda injectors
Puller adapter for Denso M25x0.5 Toyota and Mazda injectors
Product code: W0534

Puller sleeve front beam Renault Laguna II / Trafic II (oe sleeves 8200000512)
Product code: W0368

Wheel bolt for injection pump lock Volkswagen, Audi, Seat, Skoda
Wheel bolt for injection pump lock Volkswagen, Audi, Seat, Skoda
Product code: W0176

Puller for plastic sleeves Skoda Octavia II / VW Touran / Golf V
Puller for plastic sleeves Skoda Octavia II / VW Touran / Golf V (sleeve oe no. 6Q0 407 183)
Product code: W0155

Timing lock for Opel 1.4
Timing lock for camshaft and chain sprocket on Opel 1.4 petrol engines (2010-)
Product code: C01/0025

Camshaft, crankshaft and chain locking tool for BMW, Mini 1.4 and 1.6 16V
Camshaft, crankshaft and chain locking tool for BMW, Mini with 1.4 and 1.6 16V engines.
Product code: C01/0115

The viscous clutch key Volkswagen LT 2.5 TDI
Product code: W0550

Glow plug reamer, 8mm
Tool for reaming broken glow plug shafts. Diameter: 8mm. Length: 11cm.
Product code: W0698

Flywheel locking tool for Ford diesel, petrol and Ecoboost engines
Four interchangeable crankshaft locking adapters required for replacing and repairing the crankshaft pulley and replacing the Ford timing belt - for gasoline, diesel engines and Ecoboost 1.0.
Product code: C01/0063

Sleeve puller for Opel rear beams
Rear bushing puller for Zafira B, Astra H, Meriva. For the assembly and disassembly of sleeves in cars.
Product code: W0372

Timing lock for BMW N63, N74 and S63 4.4l V8 engines
For setting the timing when changing the timing chain, repairing the cylinder head, replacing the cylinder head gasket, etc.
Product code: C01/0227

Timing locks for Ford, Mazda 1.8 / 2.5 D, TD, DI, TDCI, TCI
Timing locks for Ford, Mazda 1.8 / 2.5 D, TD, DI, TDCI, TCI.
Product code: C01/0008

Timing locks for Ford, Mazda, Volvo 1.4, 1.6, 2.0 16V
Timing locks for Ford, Mazda, Volvo 1.4, 1.6, 2.0 16V.
Product code: C01/0014

O-ring and oil seal removal tool
Universal double hook puller for removing O-rings and oil seals.
Product code: CKB04117

Oil drain plug socket VW 2.0 TDI (2013-)
Oil drain plug socket VW 2.0 TDI (2013-)
Product code: C06/0007

Fish tape, 30m, red
30m steel cable fish tape in plastic red case. Flat metal tape, size 3x1mm. Insertion head size 40x10x3mm.
Product code: FT100-RED

Universal puller set
Universal puller set, jaw length 100, 200, 250mm
Product code: MG50131

Car mini bladed fuse set, 140pcs
Car mini bladed fuse set, 140pcs
Product code: G02825

Bearing and gear puller with 3 jaws. Working range: up to 6" (152mm)
Bearing and gear puller with 3 jaws. Working range: up to 6" (152mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.
Product code: G02232

Bearing and gear puller with 3 jaws. Working range: up to 4" (102mm)
Bearing and gear puller with 3 jaws. Working range: up to 4" (102mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.
Product code: G02242

Chain breaking and riveting tool set
Designed for breaking and riveting drive chains. Suitable for car, motorcycle, bicycle chains.
Product code: G02682

Timing chain and camshaft locking tool set for Mercedes engines
This timing chain and camshaft locking tool set is to be used on M271, DE18ML, E16ML, DE18LA, 4 cylinder, 2003-2005 Mercedes engines.
Product code: MG04A2121

VW Crankshaft sealing flange removing and installing tool (diesel)
Specially designed tool to renew crankshaft sealing flange.
Product code: MG04A1028

Opel 1.0 1.2 1.4 Turbo Engine Timing Tools Set
For Opel 1.0, 1.2 and 1.4 Twin Cam turbocharged engines. The kit is suitable for fixing the camshaft and the crankshaft position when removing and replacing the timing chain.
Product code: MG04A2193

Leak tester for cylinder head gasket
CO2 Combustion leak detect. This tool is designed to check for the leaks between combustion and cooling system of water-cooled engines. With 3 adapters.
Product code: MG04A4052

Brake rewind tool set, 35pcs
Brake rewind tool set, 35pcs, for almost every car type, like Citroen, Audi, Fiat, Ford, BMW, Mercedes-Benz, Toyota, Volvo, VW, Renault, Opel
Product code: MG50064

Oil filter strap wrench 60-105mm
Band wrench for dismounting all types of oil filters with a diameter of 60 to 105mm.
Product code: G02564

Tube flaring set 3-19mm
Tube flaring set for tubes with diameters: 3, 5, 6, 8, 10, 12, 15, 16, 18, 19mm.
Product code: G02720

Universal socket adapter 7 to 19mm diameters
Universal socket adapter. For nuts and bolts with 7 to 19mm diameters.
Product code: G15021

Axial joint tool, 33-42mm
Axial joint puller/installer. 1/2", clamping capacity: 33-42mm
Product code: MG50443

Tube double flaring set, 9pcs
Tube double flaring set, 9pcs for brake line tubings.
Product code: K00180

Timing lock set for Ford 1.0 EcoBoost (Fox) LT
Ford timing lock for 1.0 Eco Boost (Fox) LT engines from 2018.
Product code: C01/0229

Fuel pump tool for Land Rover and Jaguar 2.0 diesel engines
The tool is used to remove the fuel pump without damaging the chain.
Product code: C01/0255

Renault and Peugeot rear axle bush remover and installer
Designed for the removal, installation and alignment of rear axle bushes on Renault Laguna II and Peugeot 207.
Product code: C02/0094

Fuel feed pipe pliers
Suitable for the removal of connectors on in-line fuel filter.
Product code: G01659

Inertial puller for car injectors, Mercedes CDI, VW 1.9TDI and 2.5TDI
Inertial puller for car injectors, Mercedes CDI, VW 1.9TDI and 2.5TDI
Product code: W0018

Oil drain pan 10L
A container ideal for the recovery of oil and antifreeze liquids.
Product code: G02634

Tube flaring tool set with pipe cutter
Tube flaring tool set with pipe cutter. For tube sizes: 5, 6, 8, 10, 12, 14, 18mm.
Product code: G02722

Wiper arm puller
Wiper arm puller. The puller is used to remove car wiper arms. Made of durable chrome-molybdenum steel.
Product code: G02770

Rear suspension bushing tool Renault Laguna II
Rear suspension bushing tool Renault Laguna II
Product code: W0047

Slide hammer, weight 1kg, M12/M16
Slide hammer, weight 1kg, M12/M16
Product code: W0065

Puller for belt pulleys, three-arm with extended arms
Puller for belt pulleys, three-arm with extended arms
Product code: W0070

Puller for belt pulleys, four-arm
Puller for belt pulleys, four-arm
Product code: W0073

Wrench for shaft belt pulley unscrewing, BMW diesel
Wrench for shaft belt pulley unscrewing, BMW diesel, E87,E46, E60,,E61,E90,E91
Product code: W0082

Press, puller for bolts of suspension arm, front Master/Movano/Interstar
Press, puller for bolts of suspension arm, front Renault Master / Opel Movano / Nissan Interstar
Product code: W0097

Injection pump gear remover tool for BMW 2.0, 3.0
For installing and removing the injection pump in BMW diesel engines.
Product code: W0122

Hardened M12 nut with bearing for pullers
Hardened M12 nut with bearing for pullers
Product code: W0149

Flywheel locking tool, Renault Laguna, Safrane, Espace 2.2 TD
Flywheel locking tool, Renault Laguna, Safrane, Espace 2.2 TD
Product code: W0179

Timing lock for Ford, Fiat, Citroen, Peugeot 2.2 TDCI engines
Timing lock for Ford, Fiat, Citroen, Peugeot 2.2 TDCI engines.
Product code: C01/0179

Double-row bearing puller and wheel hubs II version (BMW, Mercedes etc.)
Double-row bearing puller and wheel hubs II version (BMW, Mercedes etc.)
Product code: W0205

Oil funnel with built in filter
Oil funnel with built in filter and flexible hose. Dia.: 140mm
Product code: G02150

Hook and pick set 6pcs (Lenght: 240mm)
Hook and pick set for removing seals, O-rings and gaskets.
Product code: G02706

Hook and pick set, 9pcs
Hook and pick set for removing oil seals, o-rings and gaskets
Product code: G02708

5pcs strut nut tool set for Audi, VW and Mercedes
A set of nut tools for tightening and loosening shock absorber mounts.
Product code: G02785

Car non-insulated terminal connector set, 750pcs
Car non-insulated terminal connector set, 750pcs
Product code: G02828

Timing tool set Volkswagen Touareg, Phaeton 5.0 V10 TDI
Timing tool set Volkswagen Touareg, Phaeton 5.0 V10 TDI
Product code: W0276

Lock timing Citroen AX 1.0, 1.1, 1.4, BX 16, 19, BX-16 Peugeot 106, 205, 405 1.0, 1.1, 1.4, 205, 305, 309
Product code: W0420

Hydraulic cylinder to the pullers, press and injectors - 15 Ton
Product code: W0432

Adapter for loosening stuck M14x1 injectors
Adapter for loosening stuck M14x1 injectors
Product code: W0536

Hydraulic wheel hub puller 10T
Hydraulic wheel hub puller 10T
Product code: MG04B1044B

Glow plug reamer, 7mm
Tool for reaming broken glow plug shafts. Diameter: 7mm. Length: 11cm.
Product code: W0632

Windshield wiper puller
Windshield wiper puller, max. diameter 45mm, min. diameter 17mm, simple handling, safe mechanism, design with thin legs and brass-finished ends. Weight 0.2kg.
Product code: JBM52454

Camshaft lock for BMW M60, M62 engines
Camshaft lock for BMW M60, M62, 730i, 740i, 535i, 540i, 735i, 740i, 840i, X5 engines.
Product code: C01/0039

Timing lock for BMW M43, M70, M73 engines with timing chain
Timing lock for BMW M43, M70, M73 engines with timing chain.
Product code: C01/0049

Timing lock for Ford 1.0 Ecoboost (belt in oil) gasoline engines
Timing lock for Ford 1.0 Ecoboost (belt in oil) gasoline engines.
Product code: C01/0058

Turbo Pressure Gauge, 1 to 3bar
It is fitted with 2m tubes within 1-3 bar. When the performance of the car falls, it is worth checking the turbo charge when it comes to heavy acceleration.
Product code: MG04A3069D

Break piston removal tool
Essential tool for retracting the brake piston to allow insertion of new brake pads.
Product code: CKB04066

Flaring tool kit for brake lines
For making ends of brake lines or copper, copper-nickel and thin-walled steel pipes. Adapters: 4.75, 6.35, 7.95, 9.50, 11.10, 12.70, 15.87mm
Product code: CKB09065

Oil suction gun. Capacity: 500ml
Oil suction gun is suitable for removing or replacing oil in engines and gearboxes.
Product code: G01150

Petrol engine compression tester set
The petrol engine compression tester set helps to diagnose if one of following problems is present: valve sticking, carbon build-up, cracked cylinder head or defective main gasket, poorly seated or worn piston rings, burned or damaged piston.
Product code: G02502

Internal bearing extractor set. Diameters: 8-58mm
Precision puller for tight-fitting, internal bearings and bushings.
Product code: G02577

Brake fluid tester pen
Quick and easy method to accurately gauge the moisture content of all types of brake fluid.
Product code: G02731

Puller for rear beam sleeve, FIAT Punto II
Puller for rear beam sleeve, FIAT Punto II
Product code: W0106

Crankshaft pulley puller VW / Audi 4 and 5 cylinder
Crankshaft pulley puller VW / Audi 4 and 5 cylinder
Product code: W0173

Oil pressure tester kit, hose with quick couplers, 10 adapters
For oil pump, pressure tester, oil pressure switch testing. Hose with quick couplers, with 10 adapters
Product code: JBM52754

Transmission oil filling system (ATF)
Transmission oil filling system. Capacity: 7.5l, Outlet: 80cc cycle, Viscosity range up to SAE140. Includes 15 accessories for Ford 1/8 - 27, universal BMW, Honda, Nissan, VW, Audi, Skoda, Porsche, Mini Cooper, Mercedes, Hyundai. Universal and flexible 300mm hose.
Product code: JBM52797

Transmission fluid and engine oil level gauge (dipstick) set, Mercedes Benz/Audi
5pcs transmission fluid and engine oil level gauge (dipstick) set for vehicles Mercedes Benz and Audi. Length: 920 - 930 - 1160 - 1200mm.
Product code: JBM53206

Mini fuse assortment, 120pcs
120pcs mini fuse assortment, 20pcs 5A, 20pcs 10A, 20pcs 15A, 20pcs 20A, 20pcs 25A, 20pcs 30A
Product code: JBM53355

Universal cooling system pressure test kit, 5pcs
This tool has been designed to check for leaks in the car cooling system. The four universal cone adapters fit a wide range of vehicles and cap sizes. (17-24mm, 28-31.5mm, 37-39.5mm, 47-48.5mm)
Product code: JBM54139

180° tube bender 1/4" (6mm), 5/16" (8mm) and 3/8" (10mm)
Tube bender. Diameter range: 1/4" (6mm), 5/16" (8mm) and 3/8" (10mm). For aluminum, copper and steel tubes. 0-180° angles.
Product code: JBM52905

Valve-spring compressor tool set
High load capacity valve-spring compressor tool set, for passenger cars, adjustable rod and arm
Product code: MG50103

Compression test kit
For passenger cars, utility trucks, measuring range 0-20 bar, hose length 330 mm, quick coupler
Product code: MG50191

Clutch alignment tool set, 16 cone adapters
Aligning shaft, 16 cone adapters, for Audi, Citroen, Fiat, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Toyota, VW, Volvo
Product code: MG50362

1/2" impact XZN bit socket set for VW brake calipers
1/2" impact XZN bit socket set for VW Transporter, LT M14 (length 43, 78mm), Golf M18 (length 43, 78mm), Sharan M16 (length 43, 78mm)
Product code: MG50385

Universal belt tensioner wrench set
Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm
Product code: MG50635B

Timing tool set for Ford, Mazda
Camshaft and crankshaft locking tool for 1.25-2.0 diesel and petrol engines
Product code: MG50658

10pcs bolt extractor set
Set for removing damaged nuts and bolts with sizes of 9 - 19mm.
Product code: G30032

Piston ring compression set
Piston ring service tool set for install piston rings; 3 pcs piston ring plates/compressors; 1 piston ring expander; Piston ring groove cleaner; 3 blades
Product code: JBM53251

Set of wrenches for dismantling of initial combustion chamber, diesel
Set of wrenches for dismantling of initial combustion chamber. Diesel Mercedes, Fiat, M22x1, M22x1.5
Product code: W0069

Puller for rear beam sleeve, Ford Fiesta, Ka
Puller for rear beam sleeve, Ford Fiesta, Ka
Product code: W0114

Puller to the wiper arms - universal 50x40
Puller to the wiper arms - universal 50x40
Product code: W0119

Press, puller for bolts, strengthened (W0027, W0102)
Press, puller for bolts, strengthened (W0027, W0102)
Product code: W0134

Sleeve puller, rear beams BMW E39 (sleeve oe no. 3317 1093 008)
Sleeve puller, rear beams BMW E39 (sleeve oe no. 3317 1093 008)
Product code: W0158

Timing tool set Honda, petrol and diesel 1.6, 1.8, 2.0, 2.3, 3.0 engines
Timing tool set Honda, petrol and diesel 1.6, 1.8, 2.0, 2.3, 3.0 engines
Product code: W0174

Camber angle setting tool
Camber angle setting tool
Product code: W0183

Crankshaft locking tool set VW, Audi TDI Diesel 3, 4, 5, 6 cylinders
Crankshaft locking tool set VW, Audi TDI Diesel 3, 4, 5, 6 cylinders
Product code: W0207

Viscous clutch wrench Mercedes Sprinter 3.0 V6 CDI
Viscous clutch wrench Mercedes Sprinter 3.0 V6 CDI
Product code: W0228

Internal bearing puller ⌀35mm
Two-arm puller for gearbox bearings with internal diameter 35mm
Product code: W0291

Puller sleeves left front beam Ford Focus II; III; C-Max; Volvo (no oe sleeves 1695011, 1355621, 1695011,23032, 30666042, FM-FOC
Product code: W0369

Puller sleeve right front beam Ford Focus II; III; C-Max; Volvo (no oe. 1326988, 4M515L021AB, 1326988, 23033, 30714550, FM-FOC5
Product code: W0370

Bushing puller for Ford and Volvo trailingarms
Bushing puller for Ford and Volvo trailingarms. Bushing OEM codes: 1566837, 1566837S1, 1865033.
Product code: W0385

Crankshaft front oil seal puller for Iveco, Fiat 2.3
Crankshaft front oil seal puller for Iveco, Fiat 2.3
Product code: W0437

Timing lock for VW LT 2.8 TDI
Timing lock for VW LT 2.8 TDI. Engine codes: AGK, ATA, AUH, BCQ.
Product code: W0532

Adjustable clutch plate spanner wrench air conditioning
Product code: W0616

Puller sleeve rear trailing arm KIA Creed I, II, Hyundai I 30 (oe sleeve 55543-2H000)
Product code: W0643

Wrench for unscrewing the injector nut for Volkswagen, Audi 2.0 TDI - Siemens (17mm)
Product code: W0710

Oil filter wrench for BMW and Volvo, 87-88m, 16 sides
BMW: N40, N42, N43, N45, N46, N51, N52, N53, N54, N55, N63, S63, N74. Volvo: S40, S80.
Product code: W0715

Slide hammer M12/16, ⌀85mm, weight 1,3 kg
Slide hammer M12/16, ⌀85mm, weight 1,3 kg
Product code: W0048

Wave staples for hot stapler, 0.8mm
Wave staples for hot stapler ø=0.8mm wire, 100pcs
Product code: 804078

Timing tool for BMW 1.8 and 2.0 N42, N46 engines with Valvetronic
Timing tool for BMW 1.8 and 2.0 N42, N46 engines with Valvetronic.
Product code: C01/0078

Timing locking pins for Fiat 1.2, 1.4 T-Jet
Timing locking pins for Fiat, Lancia 1.2, 1.4 16V T-Jet petrol engines.
Product code: C01/0180

Hydraulic cylinder press for silents 12T
Press for extruding bolts and ball joints with a 12 ton press capacity.
Product code: C02/0136

Bushing and silent puller adapter set for VW T4, LT, Sprinter, Movano, Master
Bushing and silent puller adapter set for VW T4, VW LT, Mercedes Sprinter, Opel Movano, Renault Master.
Product code: C02/0141

Fish tape, 15m, red
15m steel cable fish tape in plastic red case. Flat metal tape, size 3x1mm. Insertion head size 40x10x3mm.
Product code: FT50-RED

Electric terminal release tool set, 23pcs
Perfectly removes terminals from coolant sensors, wiring harness connectors and terminal blocks. Fit for BMW, Mercedes, Opel, VW, Jaguar, Porsche, Saab, Seat, Skoda, Ford, Renault, Citroen, Fiat, Honda, Mazda, Mitsubishi, and Toyota vehicles.
Product code: DK-230588

Compression pressure test set for diesel engines
With the help of the gauge you can measure the pressure in each cylinder. It allows you to quickly identify damaged fuel pumps. Max. pressure 70bars (1000psi).
Product code: G02515

Tube double flaring tool set, 10pcs
Tube double flaring tool set, 10pcs, tube sizes: 3/16", 1/4", 5/6", 3/8", 7/6", 1/2", 5/8"
Product code: G02721

Locking the variable camshaft phase Volvo V40, S40
Product code: W0636

Fuel filter wrench for Ford Transit 2.2 TDCI
Fuel filter wrench for Ford Transit and Tourneo 2.2 TDCI.
Product code: W0625

Puller sleeve rear beam back Bmw Series 5,6,7 / F 10, F11, F12, 13, F01 (33 31 6775792, 33 31 6 793 864)
Product code: W0490

Key viscous clutch Ford Transit 2.3 2.4 3.2 (2001 – 2006)
Product code: W0416

Puller arm sleeve Volkswagen T5 - rear arm
Puller arm sleeve Volkswagen T5 - rear arm
Product code: W0191

Timing lock for BMW 2.5 and 3.0 N51, N52, N52K, N53, N54 engines
Timing lock for BMW 2.5 and 3.0 N51, N52, N52K engines with Valvetronic and N53, N54 engines with direct injection.
Product code: C01/0023

Double chain type universal oil filter wrench
Suitable for oil filters up to approximately 130mm (5,1/4") in diameter.
Product code: G02554

Piston ring compressor tool set
Pliers are used to remove and install piston rings without the risk of damaging the components. Three bladed discs and a tool for cleaning the piston grooves from accumulated carbon deposits. The piston ring tensioning band helps to fit the piston into the cylinder.
Product code: G02623

Valve spring compressor tool for motorcycles and cars
Valve spring compressor tool for motorcycles, scooters and passenger cars. Adapter size 30-27.5mm, 25-23.5mm, 23-21.5mm, 19-16.5mm, 16-13.5mm.
Product code: MG50101

Oil drain plug repair kit , M13, M15, M17, M20
Oil drain plug repair kit , M13, M15, M17, M20
Product code: MG50324

Wishbone lever tool, sliding type, lockable at 5 points
Wishbone lever tool, sliding type, lockable at 5 points
Product code: MG50417

Axial joint tool, 27-42mm
Axial joint puller/installer
Product code: MG50444

Slide hammer, diameter 70mm, weight 0.9kg, length 300mm
Slide hammer, diameter 70mm, weight 0.9kg, length 300mm
Product code: W0060

Wrench for initial chamber nut, Mercedes, Fiat
Wrench for initial chamber nut, Mercedes, Fiat. Screw length 150mm, M24x2
Product code: W0056

Slide hammer, weight 2.5kg, M12/M16
Slide hammer, weight 2.5kg, M12/M16
Product code: W0067

Sleeve puller for rear suspension arm, BMW E36, Z3, E46
Sleeve puller for rear suspension arm, BMW E36, Z3, E46
Product code: W0083

Set of adapters for dismantling and mounting of lower bolts, IVECO
Set of adapters for dismantling and mounting of lower bolts, IVECO
Product code: W0116

Puller Injectors Renault Traffic , Laguna, Opel Vivaro 2.0 DCI / CDTI with chain
Product code: W0316

Front suspension bush axle beam tool L, R, Opel Astra G, H, Zafira
Front suspension bush axle beam tool Left, Right, Opel Astra G, H, Zafira (nr. oe 352 364)
Product code: W0175

Lock Crankshaft VW AUDI V6 diesel; gasoline
Product code: W0418

Puller assembly and disassembly sleeve rear beam AUDI A4, A4 Avant 94-01
Product code: W0479

Puller sleeve back beam BMW 1, 3, X1, oe sleeve 33 17 6 760 287, 33176760287
Product code: W0505

The key to the oil filter Kia / Hyundai 2.0 2.2 CRDI - 42-43 mm
Product code: W0594

Rear crankshaft oil seal replacement tool for Iveco 3.0, Mitsubishi Fuso 3.0 Euro 5
Rear crankshaft oil seal replacement tool for Iveco 3.0, Mitsubishi Fuso 3.0 Euro 5
Product code: W0619

Puller sleeve rocker back Fiat Doblo 2010 - (oem sleeve FIAT 51930337)
Product code: W0523

Puller for wheel hub / bearing rear swingarm Mercedes Vito Viano 2.2 CDI after 2003
Product code: W0361

Extra feet puller for beam puller (W0033)
Extra feet puller for beam puller (W0033)
Product code: W0150

Pneumatic brake fluid exchanger, 0.75l
For draining and filling in oil, bleeding, suitable for cars, motorcycles. Accurate and quick operation.
Product code: MG50445

Self-adjusting oil filter wrench, 64-102mm
1/2" self-adjusting oil filter wrench, opening 43-102mm, the jaws are adjustable by applying torque to the square drive
Product code: MG50033

Combustion leak tester fluid
Combustion leak tester fluid
Product code: JBM14563

Oil suction gun. Capacity: 1000ml
Oil suction gun is suitable for removing or replacing oil in engines and gearboxes.
Product code: G01151

Fish tape, 15m, green
15m steel cable fish tape in plastic green case. Flat metal tape, size 3x1mm. Insertion head size 40x10x3mm.
Product code: FT50-GREEN

Overhead valve spring removal tool
Allows valve springs and valve stem oil seals to be replaced in the cylinder head. For OHV, OHC and CHV engines.
Product code: CKBA2114

Mini wire cutter
The micro wire cutter can be used to cut copper wire, aluminum wire, zip tie, plastic burrs, jewelry craft, soft copper wire, soft iron wire, etc, not for steel wires. Tip opening: 13mm.
Product code: JBM53411

Petrol engine compression tester kit
Measuring range 0-21bar, straight extension, angled extension, extension hose, adapters M10x1.0, M12x1.25, M14x1.25, M18x1.5
Product code: MG50192

Oil pressure test kit
Measuring range 0-7bar (0-100psi), 3 adapters 1/8", 1/4", 3/8"
Product code: MG50193

Adapter for removing bolts VW Crafter, Mercedes Sprinter 906
Adapter for removing bolts VW Crafter, Mercedes Sprinter 906. Cooperate with W0027, W0133, W0134 etc.
Product code: W0141

Air conditioning clutch wrench
Air conditioning clutch wrench, 28-29mm
Product code: W0265

Key clutch viscotic Volkswagen Crafter 2.5 TDI
Product code: W0404

Puller steering knuckle sleeve rear HYUNDAI TUCSON, IX35 KIA SportAge IV 55215-2S300
Product code: W0668

Fan clutch remover for BMW
BMW fan viscous clutch remover. Double-sided holding tool with a spacing of 38mm and 44.5mm.
Product code: W0676

Ignition timing lamp
A strobe lamp for setting the ignition angle is used to check and adjust the ignition timing of gasoline engines.Â
Product code: CKB04795

Oil drain plug socket set of 23pcs
23pcs Oil drain plug socket set. Oil drain plug socket set, ideal for most car and van oil drain plugs. The case includes several accessories of different sizes.
Product code: JBM53735

Timing tool set for BMW, N47, N47S
BMW, N47, N47S, camshaft, flywheel locking tools, crankshaft pulley holding tool, injection pump locking tool, for 4-cylinder straight 2.0 TD engines
Product code: MG50344

Wheel aligner with automatic camera beam movement
Automatic camera beam movement synchronized with movement of the vehicle on the lift. All measurements can be done at floor level and adjustments at any convenient level. Provision for manual height adjustment also.
Product code: FOX3D-AB

Timing lock for Citroen and Peugeot 1.8, 2.0
Timing lock for Citroen and Peugeot 1.8, 2.0 16V engines.
Product code: C01/0016

Locking pin for VAG injection pump
Locking pin for VW, Audi, Skoda, Seat, Ford injection pumps.
Product code: C01/0031

Timing lock for BMW V8 and V12 engines with timing chain
Timing lock for BMW V8 and V12, N62 and N73 3.6, 4.0, 4.4, 4.8, 6.0 engines with timing chain.
Product code: C01/0047

Timing lock for BMW M52, M54, M56, M52TU engines
Timing lock for BMW M52, M54, M56, M52TU engines with Vanos system.
Product code: C01/0051

Lock (adapter; pin) timing Renault 2.0 DCi
Product code: W0344

Timing lock for BMW M60 and M62 3.0, 3.5, 4.0, 4.4, 4.6 engines
Timing lock for BMW M60 and M62 3.0, 3.5, 4.0, 4.4, 4.6 engines.
Product code: C01/0080

Timing lock for BMW 2.5 and 3.0 engines N54, N53
Timing lock for BMW 2.5 and 3.0. For N53 and N54 engines with direct injection.
Product code: C01/0071

Camshaft lock for Audi, VW engines 2.4 2.8 30V 2.7 Turbo
Camshaft lock for Audi, VW engines 2.4 2.8 30V 2.7 Turbo
Product code: C01/0082

Timing lock for Mercedes 1.8, 2.1 and 2.2 M651 diesel engines
Timing lock for Mercedes 1.8, 2.1 and 2.2 M651 diesel engines.
Product code: C01/0226

Shaft locking pin for VW TSI, FSI, TFSI engines
Shaft locking pin for VW TSI, FSI, TFSI engines
Product code: C01/0090

Lock timing Honda, Land Rover 2.0 TD / TDI / SDI
Product code: W0468

Lock timing Vanos BMW N53, BMW N54 Vanos
Product code: W0475

Timing lock for Skoda, Audi, VW, Seat 1.4, 1.6
Timing lock for Skoda, Audi, VW, Seat 1.4, 1.6 (FSI / 16V)
Product code: C01/0118

Timing lock for VAG 1.4 - 2.0 TDI Common rail
Timing lock for VAG 1.4 - 2.0 TDI Common rail for locking the crankshaft.
Product code: C01/0163

Timing lock for Fiat 1.1, 1.2 engines
Timing lock for Fiat 500, Panda, Grande Punto 1.1, 1.2
Product code: C01/0183

Timing lock for BMW, Rover diesel engines with common rail
Timing lock for BMW, Rover diesel engines with common rail.
Product code: C01/0185

Timing lock for Citroen, Peugeot 1.0 and 1.2 THP VTI engines
Timing tool for Peuegot, Citroen 1.0 and 1.2 VTI, e-VTI, e-THP engines.
Product code: C01/0193

Renault, Nissan timing lock 1.6 DCI
Timing lock set for Renault, Nissan 1.6 DCI, R9M engines.
Product code: C01/0200

Oil pump alignment and balance shaft tool for BMW N20 and N26 petrol engines
Specialized lock for the balancer shaft and oil pump designed for BMW N20 and N26 - 1.6 and 2.0 petrol engines.
Product code: C01/0203

Timing lock set for Mini and BMW 1.8, 2.0, 3.0, 3.5 engines with common rail
The kit includes a camshaft lock, a flywheel locking pin and a crankshaft turning socket.
Product code: C01/0233

Adapter to remove the pins down on the Renault Master 2006
Adapter to remove the pins down on the Renault Master 2006
Product code: W0160

Press for bushings and silents for hydraulic cylinder 12T
Press for pins and bushings without adapters. Can be used with a hydraulic cylinder.
Product code: C02/0149

Universal injector extractor set
Universal extractor set for pulling out engine injectors. Includes adaptors for Bosch, Delphi, Denso and Siemens injectors.
Product code: C04/0027

Adapter for extracting VW TDI PD injectors
Adapter for extracting VW TDI PD injectors
Product code: C04/0097

Puller bush Front swingarm VOLVO S60 I, S80 (TX, XY), V70 I and II (oe sleeves 9461626)
Product code: W0482

Crankshaft and camshaft locking set for VW Audi V6, V8 TDI
Crankshaft locking pin, camshaft locking device for VW, Audi, Skoda V6, V8 TDI .
Product code: CKB01654

Set of lambda probe oxygen sensor, vacuum switch remover
Professional set of lambda probe caps 7 pcs. 1/2", 3/8" x 22, 27, 29 mm. Suitable for removing and installing oxygen sensors, oil pressure switches, oil pressure sending units, thermal sensor switches, vacuum switches and break light switches.
Product code: CKB04042

Injector testing tool with adapters ( Capacity: 600bar)
The injector tester is used to regulate and check the pressure, the leaks and the quality of the spraying of the injector, to ensure excellent power and economical operation of the engine.
Product code: CKB08039

AC and fuel line disconnect set
Set for disconnecting fuel and air-conditioning quick connectors.Â
Product code: CKB09042

Engine timing tool set for VAG 2.4 and 3.2 FSI
Professional set of locks for cars from the Volkswagen and Audi group for Audi V6, V8 and V10 with a chain for petrol engines with a capacity of 2.4, 3.2, 4.2 and 5.2 liters. It is used to check and adjust the timing.
Product code: CKBA2027

Opel 1.0, 1.2, 1.4 turbo engine timing tools set
For Opel 1.0, 1.2 and 1.4 twin cam turbocharged, chain driven, petrol engines. The kit is suitable for fixing the camshaft and the crankshaft position when removing and replacing the timing chain.
Product code: CKBA2193

Fuel pump removal tool
Fuel pump removal tool. Adjustable arms: 89mm - 170mm. Universal use.
Product code: CKBA3067

Bush, bearing and seal driver set 52pcs
Bush, bearing and seal driver set 52pcs. Discs: 18 - 65mm and 74mm
Product code: CKBB1035

Two jaw gear and bearing puller. Operating range: up to 150mm
Two jaw gear puller with adjustable clamping depth and width.
Product code: G02201

Bearing and gear puller with 3 jaws. Working range: up to 8" (203mm)
Bearing and gear puller with 3 jaws. Working range: up to 8" (203mm). The puller enables the removal of bearings (internal and external) from various types of shafts and houses.
Product code: G02233

Seal and plug removal hook set
Seal and plug removal hook set. 3 pcs. (15.5, 16.5, 12cm)
Product code: JBM53053

Puller for belt pulleys, four-arm, 60mm
Puller for belt pulleys, four-arm, 60mm
Product code: W0089

Clutch centering mandrel, 2pcs
2pcs clutch centering mandrel, Ø20-26mm, Ø15-19mm
Product code: JBM53392

Car fuse set 5A-30A, 120pcs
Car fuse set 5A-30A, 120pcs.
Product code: G02809

Universal sliding hammer hub puller, with 15 screws
Universal sliding hammer hub puller, with 15 screws
Product code: W0002

Glass fuse set, 120pcs
Glass fuse set, 120pcs. 5-30A capacity.
Product code: G02816

Removal tool soft grip swivel 500mm
Removal tool soft grip swivel 500mm. Polymer strap (high resistance) 540 x 20 mm. Ø 150mm. Dentated surface for optimal grip.
Product code: JBM52416

Engine timing tool Audi & Å koda
Engine timing tool Audi, VW & Å koda. For vehicles Audi / VW V6 2.0 - 2.8 - 3.0T FSI , Audi Q5 2.0 - A6L 2.8 - 3.0T
Product code: JBM53276

Mini fuse assortment, 50pcs
50pcs mini fuse assortment, 8pcs 5A, 8pcs 10A, 8pcs 15A, 8pcs 20A, 8pcs 25A, 10pcs 30A
Product code: JBM53368

4 adapters to block the timing Renault / Opel / Nissan 1.5; 1.9; 2.0; 2.2 DCI (in box)
Product code: W0345

Waste oil collector with hand pump, 75l
Low profile waste oil collector, tank 75l, discharge volume 25l-80 rpm, hose length 2.5m, full size 1150x620x203mm
Product code: JOD607

Adapter / Puller Injector Opel Renault 2.0 DCI / CDTI and others (hardened)
Product code: W0380

Lock camshaft VW / Audi / Seat / Skoda 1.6 TDI
Product code: W0287

The key to the timing belt ribbed Ford 2.0, 2.2, 2.4 TDDI / TDCI
Product code: W0296

Cam lock Fiat Bravo / Brava / Marea, Lancia Delta / Debra 1 set. - Petrol 1.8 16V 115 KM (dark green)
Product code: W0299

BMW crankshaft pulley holder (E39, E46, E60, E61, E81, E83, E90, E91)
Crankshaft pulley holding tool for BMW 3 and 5 Series. Holds the vibration damper when loosening or tightening the central crankshaft bolt.
Product code: MG04A4041

8 PCS professional brake repairing tool
Contains the most popular brake tools used for servicing drum brakes on the most vehicles.
Product code: MG04B4040

Ball joint separator, 18mm, two-staged, max. size 50mm
Ball joint/tie rod end separator, opening 18mm, two-staged, max. size 50mm
Product code: MG50032

Axial joint puller 28-35mm
Capacity 28-35mm, length 400mm, hex end 27mm (1/2" drive)
Product code: MG50045A

Timing tool set for Opel, Saab
Camshaft, crankshaft locking tools, 1.9 CDTI/TID engines with timing belt
Product code: MG50087

Overhead valve spring compressor
For OHV, OHC and CHV engines.
Product code: MG50109

Air conditioner line tool set
Air conditioner line tool set, sizes 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"
Product code: MG50129

Mercedes CDI injector puller, with slide hammer
For removal of stuck injectors without dismantling the cylinder head. Mercedes 611, 612, 613
Product code: MG50154

Petrol fuel pump pressure test kit, 0-7bar, 1/4", 3/8" adapters
For petrol fuel pump pressure testing. For injection systems (except the CIS-Jetronic, Bosch and the GM throttle valve systems).Measuring range 0-7bar(0-100psi)
Product code: MG50195

Windshield removing tool
Windshield removing tool
Product code: MG50220A

Timing tool set for Renault, Dacia 1.4, 1.6, 1.8, 2.0 16V
Timing tool set for Renault, Dacia 1.4, 1.6, 1.8, 2.0 16V petrol engines
Product code: MG50314

Slide hammer, weight 1.5kg, M12/M16
Slide hammer, weight 1.5kg, M12/M16
Product code: W0066

Timing tool set for Volvo
For 4-, 5- and 6-cylinder Twin Cam (except the 3.2l) engines
Product code: MG50340

Injector nozzle extractor set
For COMMON RAIL systems, length 350mm, injector adapter M17x1.0, M27x1.0, M12x1.75
Product code: MG50350

Injector nozzle extractor set for Mercedes-Benz, Chrysler
Mercedes C-Class, E-Class, Sprinter (611, 612, 613) Chrysler Grand Cherokee 27crd (00'-)
Product code: MG50357

Timing tool set for Fiat, Ford
For 1.2 and 1.4 8V petrol engines
Product code: MG50372

Jointed glow plug socket set, 8-16mm
Jointed glow plug socket set, 3/8", length 158mm, sizes 8, 9, 10, 12, 14, 16mm
Product code: MG50377

Injection nozzle socket set
25, 27, 28, 29, 30mm Siemens, Bosch, for Peugeot and Citroen 2.0 HDI engines
Product code: MG50604

Timing tool set for VW, Audi, Skoda, Seat
Timing belt tensioner, upper dead centre measurer, camshaft locking tool, for VW 1.4, 1.6 FSI, 1.8 Turbo, 1.8 V16, 1.8 Cupra R petrol engines
Product code: MG50603

Timing tool set for VAG
For 1.6, 2.0 TDi CR, fifth generation Common Rail diesel (Blue Motion) engines.